ME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xdc500000-0xdc503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xdc505800-0xdc505bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0x4048-0x404f]
pci 0000:00:1f.2: reg 14: [io  0x405c-0x405f]
pci 0000:00:1f.2: reg 18: [io  0x4040-0x4047]
pci 0000:00:1f.2: reg 1c: [io  0x4058-0x405b]
pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
pci 0000:00:1f.2: reg 24: [mem 0xdc505000-0xdc5057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xdc506000-0xdc5060ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
pci 0000:00:1f.6: reg 10: [mem 0xdc504000-0xdc504fff 64bit]
pci 0000:01:00.0: [1002:68c1] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xdc400000-0xdc41ffff 64bit]
pci 0000:01:00.0: reg 20: [io  0x3000-0x30ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xdc420000-0xdc423fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:01.0:   bridge window [mem 0xdc400000-0xdc4fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:02:00.0: [1969:1073] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xdb400000-0xdb43ffff 64bit]
pci 0000:02:00.0: reg 18: [io  0x2000-0x207f]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xdb400000-0xdc3fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd8400000-0xd93fffff 64bit pref]
pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [mem 0xda400000-0xda40ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.5:   bridge window [mem 0xda400000-0xdb3fffff]
pci 0000:00:1c.5:   bridge window [mem 0xd9400000-0xda3fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f 
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
pci 0000:7f:00.0: [8086:2c62] type 0 class 0x000600
pci 0000:7f:00.1: [8086:2d01] type 0 class 0x000600
pci 0000:7f:02.0: [8086:2d10] type 0 class 0x000600
pci 0000:7f:02.1: [8086:2d11] type 0 class 0x000600
pci 0000:7f:02.2: [8086:2d12] type 0 class 0x000600
pci 0000:7f:02.3: [8086:2d13] type 0 class 0x000600
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d000 - 000000000009ffff 
reserve RAM buffer: 00000000b3675000 - 00000000b3ffffff 
reserve RAM buffer: 00000000b373b000 - 00000000b3ffffff 
reserve RAM buffer: 00000000b37e1000 - 00000000b3ffffff 
reserve RAM buffer: 00000000b3800000 - 00000000b3ffffff 
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-7e]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xc0000000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0081-0x0091]
pnp 00:01: [io  0x0093-0x009f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x002e-0x002f]
pnp 00:05: [io  0x004e-0x004f]
pnp 00:05: [io  0x0061]
pnp 00:05: [io  0x0063]
pnp 00:05: [io  0x0065]
pnp 00:05: [io  0x0067]
pnp 00:05: [io  0x0070]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0092]
pnp 00:05: [io  0x00b2-0x00b3]
pnp 00:05: [io  0x0680-0x069f]
pnp 00:05: [io  0x0800-0x080f]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0x0400-0x047f]
pnp 00:05: [io  0x0500-0x057f]
pnp 00:05: [io  0x164e-0x164f]
pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 7 [io  0x1000-0x1fff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io  0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io  0x0060]
pnp 00:07: [io  0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed10000-0xfed13fff]
pnp 00:09: [mem 0xfed18000-0xfed18fff]
pnp 00:09: [mem 0xfed19000-0xfed19fff]
pnp 00:09: [mem 0xf0000000-0xf1ffffff]
pnp 00:09: [mem 0xfed20000-0xfed3ffff]
pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
pnp 00:09: [mem 0xfed45000-0xfed8ffff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xdc600000-0xdc600fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [bus 7f]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xdc600000-0xdc600fff] has been reserved
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xdc440000-0xdc45ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:01.0:   bridge window [mem 0xdc400000-0xdc4fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xdb400000-0xdc3fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd8400000-0xd93fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.5:   bridge window [mem 0xda400000-0xdb3fffff]
pci 0000:00:1c.5:   bridge window [mem 0xd9400000-0xda3fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xdc400000-0xdc4fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xdb400000-0xdc3fffff]
pci_bus 0000:02: resource 2 [mem 0xd8400000-0xd93fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xda400000-0xdb3fffff]
pci_bus 0000:03: resource 2 [mem 0xd9400000-0xda3fffff 64bit pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 372k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800af273000 - ffff8800b3273000
software IO TLB at phys 0xaf273000 - 0xb3273000
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1294918915.398:1): initialized
msgmni has been set to 7276
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdc505000 port 0xdc505100 irq 40
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40
ata3: DUMMY
ata4: DUMMY
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2011-01-13 11:41:56 UTC (1294918916)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000BEVT-22A0RT0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-U633F, AC00, max UDMA/100
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-U633F  AC00 PQ: 0 ANSI: 5
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext2 filesystem) readonly on device 8:7.
Freeing unused kernel memory: 512k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 768k freed
Freeing unused kernel memory: 980k freed
udev[4047]: starting version 164
input: PC Speaker as /devices/platform/pcspkr/input/input6
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0x4000-0x401f] conflicts with ACPI region SMBI [mem 0x00004000-0x0000400f pref window disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Linux agpgart interface v0.103
cfg80211: Calling CRDA to update world regulatory domain
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
atl1c 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atl1c 0000:02:00.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
atl1c 0000:02:00.0: version 1.0.1.0-NAPI
wmi: Mapper loaded
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (57 C)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: acpi_idle yielding to intel_idle
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 131072K stolen memory, trimming to 32768K
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: no more MTRRs available
[drm] MTRR allocation failed.  Graphics performance may suffer.
i915 0000:00:02.0: irq 41 for MSI/MSI-X
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
acpi device:0b: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input8
ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
HDA Intel 0000:00:1b.0: BAR 0: set to [mem 0xdc500000-0xdc503fff 64bit] (PCI address [0xdc500000-0xdc503fff])
HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
radeon 0000:01:00.0: enabling device (0000 -> 0003)
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1).
[drm] register mmio base: 0xDC400000
[drm] register mmio size: 131072
vga_switcheroo: enabled
radeon atpx: version is 1
ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:03:00.0: setting latency timer to 64
ath: EEPROM regdomain: 0x8283
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3
ath: Country alpha2 being used: RU
ath: Regpair used: 0x3
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90009160000, irq=17
cfg80211: Calling CRDA for country: RU
hda_codec: ALC271X: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdc505c00
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.37-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdc505800
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.37-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ATOM BIOS: Acer
radeon 0000:01:00.0: GPU softreset 
radeon 0000:01:00.0:   GRBM_STATUS=0x00003828
radeon 0000:01:00.0:   GRBM_STATUS_SE0=0x00000007
radeon 0000:01:00.0:   GRBM_STATUS_SE1=0x00000007
radeon 0000:01:00.0:   SRBM_STATUS=0x200000C0
radeon 0000:01:00.0:   GRBM_SOFT_RESET=0x00007F6B
radeon 0000:01:00.0:   GRBM_STATUS=0x00003828
radeon 0000:01:00.0:   GRBM_STATUS_SE0=0x00000007
radeon 0000:01:00.0:   GRBM_STATUS_SE1=0x00000007
radeon 0000:01:00.0:   SRBM_STATUS=0x200000C0
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
mtrr: no more MTRRs available
[drm] Detected VRAM RAM=1024M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 1863796 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: irq 43 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading REDWOOD Microcode
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   LVDS
[drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm]   Encoders:
[drm]     LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm]   HDMI-A
[drm]   HPD1
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm]   VGA
[drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
hub 1-1:1.0: unable to enumerate USB device on port 1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 4325376
[drm] fb depth is 24
[drm]    pitch is 5632
fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on minor 1
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 1-1.1: new high speed USB device using ehci_hcd and address 4
usb 1-1.1: New USB device found, idVendor=064e, idProduct=a219
usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1.1: Product: 1.3M WebCam
usb 1-1.1: Manufacturer: Suyin
usb 1-1.1: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
Linux video capture interface: v2.00
usb 2-1.5: new full speed USB device using ehci_hcd and address 3
uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
coretemp coretemp.0: TjMax is 105 C.
coretemp coretemp.2: TjMax is 105 C.
usb 2-1.5: New USB device found, idVendor=0489, idProduct=e011
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: Acer Module
usb 2-1.5: Manufacturer: Broadcom Corp
usb 2-1.5: SerialNumber: F07BCBEB41EA
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
acer-wmi: Acer Laptop ACPI-WMI Extras
acer-wmi: Brightness must be controlled by generic video driver
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
microcode: Microcode Update Driver: v2.00 removed.
Adding 2096444k swap on /dev/sda6.  Priority:-1 extents:1 across:2096444k 
intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
fuse init (API version 7.15)
fbcon: Remapping primary device, fb1, to tty 1-63
i915: switched off
CPUFREQ: Per core conservative sysfs interface is deprecated - ignore_nice_load
ata1.00: configured for UDMA/133
ata1: EH complete
WARNING! power/level is deprecated; use power/control instead
start_kdeinit (6234): /proc/6234/oom_adj is deprecated, please use /proc/6234/oom_score_adj instead.
ata1.00: configured for UDMA/133
ata1: EH complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
wlan0: authenticate with 00:22:15:0b:58:db (try 1)
wlan0: authenticated
wlan0: associate with 00:22:15:0b:58:db (try 1)
wlan0: RX AssocResp from 00:22:15:0b:58:db (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
ata1.00: configured for UDMA/133
ata1: EH complete
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
EXT4-fs (sda2): re-mounted. Opts: (null)
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
EXT4-fs (sda2): re-mounted. Opts: (null)
ata1.00: configured for UDMA/133
ata1: EH complete
wlan0: deauthenticating from 00:22:15:0b:58:db by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
i915 0000:00:02.0: BAR 0: set to [mem 0xd8000000-0xd83fffff 64bit] (PCI address [0xd8000000-0xd83fffff])
i915 0000:00:02.0: BAR 2: set to [mem 0xc0000000-0xcfffffff 64bit pref] (PCI address [0xc0000000-0xcfffffff])
i915 0000:00:02.0: BAR 4: set to [io  0x4050-0x4057] (PCI address [0x4050-0x4057])
i915: switched on
i915 0000:00:02.0: setting latency timer to 64
fbcon: Remapping primary device, fb0, to tty 1-63
radeon: switched off
[drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing CD0C (len 62, WS 0, PS 0) @ 0xCD28