From f7e147f67dae2e70835325c4c5c729dc744495d3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Tue, 25 Jan 2011 05:37:52 +0100 Subject: [PATCH] r300g: fix any remaining issues with zbuffer compression (v3) This drops the memblock manager for ZMASK. Instead, only one zbuffer can be compressed at a time. Note that this does not necessarily have to be slower. When there is a large number of zbuffers, compression might be used more often than it was before. This decision makes for a more predictable behavior and therefore easier debugging. 1) 'clear' turns the compression on. 2) If some other zbuffer is set or the currently-bound zbuffer is used for texturing, the driver decompresses it and then turns the compression off. The ZMASK clear was refactored, so that only one packet3 is used to clear ZMASK. The 8x8 compression mode is disabled. I couldn't make it work without issues. Also removed driver-specific stuff from u_blitter. --- src/gallium/auxiliary/util/u_blitter.c | 77 +++++---- src/gallium/auxiliary/util/u_blitter.h | 13 +- src/gallium/auxiliary/util/u_inlines.h | 15 ++ src/gallium/drivers/r300/r300_blit.c | 222 +++++++++++++------------ src/gallium/drivers/r300/r300_chipset.c | 2 + src/gallium/drivers/r300/r300_chipset.h | 13 ++- src/gallium/drivers/r300/r300_context.c | 17 ++- src/gallium/drivers/r300/r300_context.h | 25 ++- src/gallium/drivers/r300/r300_emit.c | 84 +++++----- src/gallium/drivers/r300/r300_hyperz.c | 120 +++----------- src/gallium/drivers/r300/r300_hyperz.h | 2 +- src/gallium/drivers/r300/r300_state.c | 66 +++++--- src/gallium/drivers/r300/r300_state_derived.c | 28 +++- src/gallium/drivers/r300/r300_texture.c | 2 - 14 files changed, 357 insertions(+), 329 deletions(-) diff --git a/src/gallium/auxiliary/util/u_blitter.c b/src/gallium/auxiliary/util/u_blitter.c index e72f267..1f9d509 100644 --- a/src/gallium/auxiliary/util/u_blitter.c +++ b/src/gallium/auxiliary/util/u_blitter.c @@ -86,7 +86,6 @@ struct blitter_context_priv void *dsa_write_depth_keep_stencil; void *dsa_keep_depth_stencil; void *dsa_keep_depth_write_stencil; - void *dsa_flush_depth_stencil; void *velem_state; @@ -158,10 +157,6 @@ struct blitter_context *util_blitter_create(struct pipe_context *pipe) ctx->dsa_keep_depth_stencil = pipe->create_depth_stencil_alpha_state(pipe, &dsa); - dsa.depth.writemask = 1; - ctx->dsa_flush_depth_stencil = - pipe->create_depth_stencil_alpha_state(pipe, &dsa); - dsa.depth.enabled = 1; dsa.depth.writemask = 1; dsa.depth.func = PIPE_FUNC_ALWAYS; @@ -247,7 +242,6 @@ void util_blitter_destroy(struct blitter_context *blitter) ctx->dsa_write_depth_keep_stencil); pipe->delete_depth_stencil_alpha_state(pipe, ctx->dsa_write_depth_stencil); pipe->delete_depth_stencil_alpha_state(pipe, ctx->dsa_keep_depth_write_stencil); - pipe->delete_depth_stencil_alpha_state(pipe, ctx->dsa_flush_depth_stencil); pipe->delete_rasterizer_state(pipe, ctx->rs_state); pipe->delete_vs_state(pipe, ctx->vs); @@ -665,12 +659,13 @@ static void blitter_draw_rectangle(struct blitter_context *blitter, blitter_draw_quad(ctx); } -void util_blitter_clear(struct blitter_context *blitter, - unsigned width, unsigned height, - unsigned num_cbufs, - unsigned clear_buffers, - const float *rgba, - double depth, unsigned stencil) +static void util_blitter_clear_custom(struct blitter_context *blitter, + unsigned width, unsigned height, + unsigned num_cbufs, + unsigned clear_buffers, + const float *rgba, + double depth, unsigned stencil, + void *custom_blend, void *custom_dsa) { struct blitter_context_priv *ctx = (struct blitter_context_priv*)blitter; struct pipe_context *pipe = ctx->base.pipe; @@ -681,26 +676,28 @@ void util_blitter_clear(struct blitter_context *blitter, blitter_check_saved_CSOs(ctx); /* bind CSOs */ - if (clear_buffers & PIPE_CLEAR_COLOR) + if (custom_blend) { + pipe->bind_blend_state(pipe, custom_blend); + } else if (clear_buffers & PIPE_CLEAR_COLOR) { pipe->bind_blend_state(pipe, ctx->blend_write_color); - else + } else { pipe->bind_blend_state(pipe, ctx->blend_keep_color); + } - if ((clear_buffers & PIPE_CLEAR_DEPTHSTENCIL) == PIPE_CLEAR_DEPTHSTENCIL) { - sr.ref_value[0] = stencil & 0xff; + if (custom_dsa) { + pipe->bind_depth_stencil_alpha_state(pipe, custom_dsa); + } else if ((clear_buffers & PIPE_CLEAR_DEPTHSTENCIL) == PIPE_CLEAR_DEPTHSTENCIL) { pipe->bind_depth_stencil_alpha_state(pipe, ctx->dsa_write_depth_stencil); - pipe->set_stencil_ref(pipe, &sr); - } - else if (clear_buffers & PIPE_CLEAR_DEPTH) { + } else if (clear_buffers & PIPE_CLEAR_DEPTH) { pipe->bind_depth_stencil_alpha_state(pipe, ctx->dsa_write_depth_keep_stencil); - } - else if (clear_buffers & PIPE_CLEAR_STENCIL) { - sr.ref_value[0] = stencil & 0xff; + } else if (clear_buffers & PIPE_CLEAR_STENCIL) { pipe->bind_depth_stencil_alpha_state(pipe, ctx->dsa_keep_depth_write_stencil); - pipe->set_stencil_ref(pipe, &sr); - } - else + } else { pipe->bind_depth_stencil_alpha_state(pipe, ctx->dsa_keep_depth_stencil); + } + + sr.ref_value[0] = stencil & 0xff; + pipe->set_stencil_ref(pipe, &sr); pipe->bind_rasterizer_state(pipe, ctx->rs_state); pipe->bind_vertex_elements_state(pipe, ctx->velem_state); @@ -713,6 +710,27 @@ void util_blitter_clear(struct blitter_context *blitter, blitter_restore_CSOs(ctx); } +void util_blitter_clear(struct blitter_context *blitter, + unsigned width, unsigned height, + unsigned num_cbufs, + unsigned clear_buffers, + const float *rgba, + double depth, unsigned stencil) +{ + util_blitter_clear_custom(blitter, width, height, num_cbufs, + clear_buffers, rgba, depth, stencil, + NULL, NULL); +} + +void util_blitter_clear_depth_custom(struct blitter_context *blitter, + unsigned width, unsigned height, + double depth, void *custom_dsa) +{ + const float rgba[4] = {0, 0, 0, 0}; + util_blitter_clear_custom(blitter, width, height, 0, + 0, rgba, depth, 0, NULL, custom_dsa); +} + static boolean is_overlap(unsigned sx1, unsigned sx2, unsigned sy1, unsigned sy2, unsigned dx1, unsigned dx2, unsigned dy1, unsigned dy2) @@ -1024,12 +1042,3 @@ void util_blitter_custom_depth_stencil(struct blitter_context *blitter, UTIL_BLITTER_ATTRIB_NONE, NULL); blitter_restore_CSOs(ctx); } - -/* flush a region of a depth stencil surface for r300g */ -void util_blitter_flush_depth_stencil(struct blitter_context *blitter, - struct pipe_surface *dstsurf) -{ - struct blitter_context_priv *ctx = (struct blitter_context_priv*)blitter; - util_blitter_custom_depth_stencil(blitter, dstsurf, NULL, - ctx->dsa_flush_depth_stencil, 0.0f); -} diff --git a/src/gallium/auxiliary/util/u_blitter.h b/src/gallium/auxiliary/util/u_blitter.h index 922a858..47494c9 100644 --- a/src/gallium/auxiliary/util/u_blitter.h +++ b/src/gallium/auxiliary/util/u_blitter.h @@ -55,13 +55,13 @@ struct blitter_context * \param y1 A Y coordinate of the top-left corner. * \param x2 An X coordinate of the bottom-right corner. * \param y2 A Y coordinate of the bottom-right corner. - * \param depth A depth which the rectangle is rendered at. + * \param depth A depth which the rectangle is rendered at. * * \param type Semantics of the attributes "attrib". * If type is UTIL_BLITTER_ATTRIB_NONE, ignore them. * If type is UTIL_BLITTER_ATTRIB_COLOR, the attributes - * make up a constant RGBA color, and should go to the COLOR0 - * varying slot of a fragment shader. + * make up a constant RGBA color, and should go + * to the GENERIC0 varying slot of a fragment shader. * If type is UTIL_BLITTER_ATTRIB_TEXCOORD, {a1, a2} and * {a3, a4} specify top-left and bottom-right texture * coordinates of the rectangle, respectively, and should go @@ -141,6 +141,10 @@ void util_blitter_clear(struct blitter_context *blitter, const float *rgba, double depth, unsigned stencil); +void util_blitter_clear_depth_custom(struct blitter_context *blitter, + unsigned width, unsigned height, + double depth, void *custom_dsa); + /** * Copy a block of pixels from one surface to another. * @@ -200,9 +204,6 @@ void util_blitter_clear_depth_stencil(struct blitter_context *blitter, unsigned dstx, unsigned dsty, unsigned width, unsigned height); -void util_blitter_flush_depth_stencil(struct blitter_context *blitter, - struct pipe_surface *dstsurf); - void util_blitter_custom_depth_stencil(struct blitter_context *blitter, struct pipe_surface *zsurf, struct pipe_surface *cbsurf, diff --git a/src/gallium/auxiliary/util/u_inlines.h b/src/gallium/auxiliary/util/u_inlines.h index b4870bc..fc4eb8f 100644 --- a/src/gallium/auxiliary/util/u_inlines.h +++ b/src/gallium/auxiliary/util/u_inlines.h @@ -160,6 +160,21 @@ pipe_surface_init(struct pipe_context *ctx, struct pipe_surface* ps, pipe_surface_reset(ctx, ps, pt, level, layer, flags); } +/* Return true if the surfaces are equal. */ +static INLINE boolean +pipe_surface_equal(struct pipe_surface *s1, struct pipe_surface *s2) +{ + return s1->texture == s2->texture && + s1->format == s2->format && + (s1->texture->target != PIPE_BUFFER || + (s1->u.buf.first_element == s2->u.buf.first_element && + s1->u.buf.last_element == s2->u.buf.last_element)) && + (s1->texture->target == PIPE_BUFFER || + (s1->u.tex.level == s2->u.tex.level && + s1->u.tex.first_layer == s2->u.tex.first_layer && + s1->u.tex.last_layer == s2->u.tex.last_layer)); +} + /* * Convenience wrappers for screen buffer functions. */ diff --git a/src/gallium/drivers/r300/r300_blit.c b/src/gallium/drivers/r300/r300_blit.c index e195128..6256418 100644 --- a/src/gallium/drivers/r300/r300_blit.c +++ b/src/gallium/drivers/r300/r300_blit.c @@ -58,8 +58,9 @@ static void r300_blitter_begin(struct r300_context* r300, enum r300_blitter_op o util_blitter_save_vertex_buffers(r300->blitter, r300->vertex_buffer_count, r300->vertex_buffer); - if (op & (R300_CLEAR_SURFACE | R300_COPY)) + if (op & (R300_CLEAR_SURFACE | R300_COPY)) { util_blitter_save_framebuffer(r300->blitter, r300->fb_state.state); + } if (op & R300_COPY) { struct r300_textures_state* state = @@ -108,6 +109,18 @@ static boolean r300_cbzb_clear_allowed(struct r300_context *r300, return r300_surface(fb->cbufs[0])->cbzb_allowed; } +static boolean r300_fast_zclear_allowed(struct r300_context *r300) +{ + struct pipe_framebuffer_state *fb = + (struct pipe_framebuffer_state*)r300->fb_state.state; + + /* Cannot decompress zmask with a 16-bit zbuffer. */ + if (util_format_get_blocksizebits(fb->zsbuf->texture->format) == 16) + return FALSE; + + return TRUE; +} + static uint32_t r300_depth_clear_value(enum pipe_format format, double depth, unsigned stencil) { @@ -132,37 +145,46 @@ static void r300_clear(struct pipe_context* pipe, double depth, unsigned stencil) { - /* My notes about fastfill: + /* My notes about Zbuffer compression: * - * 1) Only the zbuffer is cleared. + * 1) The zbuffer must be micro-tiled and whole microtiles must be + * written if compression is enabled. If microtiling is disabled, + * it locks up. * - * 2) The zbuffer must be micro-tiled and whole microtiles must be - * written. If microtiling is disabled, it locks up. + * 2) There is ZMASK RAM which contains a compressed zbuffer. + * Each dword of the Z Mask contains compression information + * for 16 4x4 pixel tiles, that is 2 bits for each tile. + * On chips with 2 Z pipes, every other dword maps to a different + * pipe. On newer chipsets, there is a new compression mode + * with 8x8 pixel tiles per 2 bits. * - * 3) There is Z Mask RAM which contains a compressed zbuffer and - * it interacts with fastfill. We should figure out how to use it - * to get more performance. - * This is what we know about the Z Mask: + * 3) The FASTFILL bit has nothing to do with filling. It only tells hw + * it should look in the ZMASK RAM first before fetching from a real + * zbuffer. * - * Each dword of the Z Mask contains compression information - * for 16 4x4 pixel blocks, that is 2 bits for each block. - * On chips with 2 Z pipes, every other dword maps to a different - * pipe. + * 4) If a pixel is in a cleared state, ZB_DEPTHCLEARVALUE is returned + * during zbuffer reads instead of the value that is actually stored + * in the zbuffer memory. A pixel is in a cleared state when its ZMASK + * is equal to 0. Therefore, if you clear ZMASK with zeros, you may + * leave the zbuffer memory uninitialized, but then you must enable + * compression, so that the ZMASK RAM is actually used. * - * 4) ZB_DEPTHCLEARVALUE is used to clear the zbuffer and the Z Mask must - * be equal to 0. (clear the Z Mask RAM with zeros) + * 5) Each 4x4 (or 8x8) tile is automatically decompressed and recompressed + * during zbuffer updates. A special decompressing operation should be + * used to fully decompress a zbuffer, which basically just stores all + * compressed tiles in ZMASK to the zbuffer memory. * - * 5) For 16-bit zbuffer, compression causes a hung with one or + * 6) For a 16-bit zbuffer, compression causes a hung with one or * two samples and should not be used. * - * 6) FORCE_COMPRESSED_STENCIL_VALUE should be enabled for stencil clears + * 7) FORCE_COMPRESSED_STENCIL_VALUE should be enabled for stencil clears * to avoid needless decompression. * - * 7) Fastfill must not be used if reading of compressed Z data is disabled + * 8) Fastfill must not be used if reading of compressed Z data is disabled * and writing of compressed Z data is enabled (RD/WR_COMP_ENABLE), * i.e. it cannot be used to compress the zbuffer. * - * 8) ZB_CB_CLEAR does not interact with fastfill in any way. + * 9) ZB_CB_CLEAR does not interact with zbuffer compression in any way. * * - Marek */ @@ -179,25 +201,23 @@ static void r300_clear(struct pipe_context* pipe, boolean can_hyperz = r300->rws->get_value(r300->rws, R300_CAN_HYPERZ); uint32_t hyperz_dcv = hyperz->zb_depthclearvalue; - /* Decompress zbuffers that are bound as textures. If we didn't flush here, - * it would happen inside the blitter when updating derived state, - * causing a blitter operation to be called from inside the blitter, - * which would overwrite saved states and they would never get restored. */ - r300_flush_depth_textures(r300); - /* Enable fast Z clear. * The zbuffer must be in micro-tiled mode, otherwise it locks up. */ if ((buffers & PIPE_CLEAR_DEPTHSTENCIL) && can_hyperz) { hyperz_dcv = hyperz->zb_depthclearvalue = r300_depth_clear_value(fb->zsbuf->format, depth, stencil); - r300_mark_fb_state_dirty(r300, R300_CHANGED_ZCLEAR_FLAG); - if (zstex->zmask_mem[fb->zsbuf->u.tex.level]) { + if (r300_fast_zclear_allowed(r300)) { r300_mark_atom_dirty(r300, &r300->zmask_clear); buffers &= ~PIPE_CLEAR_DEPTHSTENCIL; } + if (zstex->hiz_mem[fb->zsbuf->u.tex.level]) r300_mark_atom_dirty(r300, &r300->hiz_clear); + + /* XXX Change this to r300_mark_atom_dirty(r300, &r300->hyperz_state); + * once hiz offset is constant. */ + r300_mark_fb_state_dirty(r300, R300_CHANGED_HYPERZ_FLAG); } /* Enable CBZB clear. */ @@ -211,7 +231,7 @@ static void r300_clear(struct pipe_context* pipe, height = surf->cbzb_height; r300->cbzb_clear = TRUE; - r300_mark_fb_state_dirty(r300, R300_CHANGED_CBZB_FLAG); + r300_mark_fb_state_dirty(r300, R300_CHANGED_HYPERZ_FLAG); } /* Clear. */ @@ -225,7 +245,7 @@ static void r300_clear(struct pipe_context* pipe, buffers, rgba, depth, stencil); r300_blitter_end(r300); } else if (r300->zmask_clear.dirty) { - /* Just clear zmask and hiz now, this does not use a standard draw + /* Just clear zmask and hiz now, this does not use the standard draw * procedure. */ unsigned dwords; @@ -257,16 +277,15 @@ static void r300_clear(struct pipe_context* pipe, if (r300->cbzb_clear) { r300->cbzb_clear = FALSE; hyperz->zb_depthclearvalue = hyperz_dcv; - r300_mark_fb_state_dirty(r300, R300_CHANGED_CBZB_FLAG); + r300_mark_fb_state_dirty(r300, R300_CHANGED_HYPERZ_FLAG); } /* Enable fastfill and/or hiz. * * If we cleared zmask/hiz, it's in use now. The Hyper-Z state update * looks if zmask/hiz is in use and enables fastfill accordingly. */ - if (zstex && - (zstex->zmask_in_use[fb->zsbuf->u.tex.level] || - zstex->hiz_in_use[fb->zsbuf->u.tex.level])) { + if (r300->zmask_in_use || + (zstex && zstex->hiz_in_use[fb->zsbuf->u.tex.level])) { r300_mark_atom_dirty(r300, &r300->hyperz_state); } } @@ -280,16 +299,16 @@ static void r300_clear_render_target(struct pipe_context *pipe, { struct r300_context *r300 = r300_context(pipe); - /* Decompress zbuffers that are bound as textures. If we didn't flush here, - * it would happen inside the blitter when updating derived state, - * causing a blitter operation to be called from inside the blitter, - * which would overwrite saved states and they would never get restored. */ - r300_flush_depth_textures(r300); + r300->zmask_locked = TRUE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); r300_blitter_begin(r300, R300_CLEAR_SURFACE); util_blitter_clear_render_target(r300->blitter, dst, rgba, dstx, dsty, width, height); r300_blitter_end(r300); + + r300->zmask_locked = FALSE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); } /* Clear a region of a depth stencil surface. */ @@ -302,83 +321,70 @@ static void r300_clear_depth_stencil(struct pipe_context *pipe, unsigned width, unsigned height) { struct r300_context *r300 = r300_context(pipe); + struct pipe_framebuffer_state *fb = + (struct pipe_framebuffer_state*)r300->fb_state.state; - /* Decompress zbuffers that are bound as textures. If we didn't flush here, - * it would happen inside the blitter when updating derived state, - * causing a blitter operation to be called from inside the blitter, - * which would overwrite saved states and they would never get restored. */ - r300_flush_depth_textures(r300); + if (r300->zmask_in_use && !r300->zmask_locked) { + if (fb->zsbuf->texture == dst->texture) { + r300_decompress_zmask(r300); + } else { + r300->zmask_locked = TRUE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); + } + } r300_blitter_begin(r300, R300_CLEAR_SURFACE); util_blitter_clear_depth_stencil(r300->blitter, dst, clear_flags, depth, stencil, dstx, dsty, width, height); r300_blitter_end(r300); + + if (r300->zmask_locked) { + r300->zmask_locked = FALSE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); + } } -/* Flush a depth stencil buffer. */ -static void r300_flush_depth_stencil(struct pipe_context *pipe, - struct pipe_resource *dst, - unsigned level, - unsigned layer) +void r300_decompress_zmask(struct r300_context *r300) { - struct r300_context *r300 = r300_context(pipe); - struct pipe_surface *dstsurf, surf_tmpl; - struct r300_texture *tex = r300_texture(dst); + struct pipe_framebuffer_state *fb = + (struct pipe_framebuffer_state*)r300->fb_state.state; - if (!tex->zmask_mem[level]) + if (!r300->zmask_in_use || r300->zmask_locked) return; - if (!tex->zmask_in_use[level]) - return; - - surf_tmpl.format = dst->format; - surf_tmpl.usage = PIPE_BIND_DEPTH_STENCIL; - surf_tmpl.u.tex.level = level; - surf_tmpl.u.tex.first_layer = layer; - surf_tmpl.u.tex.last_layer = layer; - dstsurf = pipe->create_surface(pipe, dst, &surf_tmpl); - r300->z_decomp_rd = TRUE; + r300->zmask_decompress = TRUE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); - r300_blitter_begin(r300, R300_CLEAR_SURFACE); - util_blitter_flush_depth_stencil(r300->blitter, dstsurf); + r300_blitter_begin(r300, R300_CLEAR); + util_blitter_clear_depth_custom(r300->blitter, fb->width, fb->height, 0, + r300->dsa_decompress_zmask); r300_blitter_end(r300); - r300->z_decomp_rd = FALSE; - tex->zmask_in_use[level] = FALSE; - pipe_surface_reference(&dstsurf, NULL); + r300->zmask_decompress = FALSE; + r300->zmask_in_use = FALSE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); } -/* We can't use compressed zbuffers as samplers. */ -void r300_flush_depth_textures(struct r300_context *r300) +void r300_decompress_zmask_locked_unsafe(struct r300_context *r300) { - struct r300_textures_state *state = - (struct r300_textures_state*)r300->textures_state.state; - unsigned i, level; - unsigned count = MIN2(state->sampler_view_count, - state->sampler_state_count); - - if (r300->z_decomp_rd) - return; - - for (i = 0; i < count; i++) - if (state->sampler_views[i] && state->sampler_states[i]) { - struct pipe_resource *tex = state->sampler_views[i]->base.texture; - - if (tex->target == PIPE_TEXTURE_3D || - tex->target == PIPE_TEXTURE_CUBE) - continue; + struct pipe_framebuffer_state fb = {0}; + fb.width = r300->locked_zbuffer->width; + fb.height = r300->locked_zbuffer->height; + fb.nr_cbufs = 0; + fb.zsbuf = r300->locked_zbuffer; + + r300->context.set_framebuffer_state(&r300->context, &fb); + r300_decompress_zmask(r300); +} - /* Ignore non-depth textures. - * Also ignore reinterpreted depth textures, e.g. resource_copy. */ - if (!util_format_is_depth_or_stencil(tex->format)) - continue; +void r300_decompress_zmask_locked(struct r300_context *r300) +{ + struct pipe_framebuffer_state saved_fb = {0}; - for (level = 0; level <= tex->last_level; level++) - if (r300_texture(tex)->zmask_in_use[level]) { - /* We don't handle 3D textures and cubemaps yet. */ - r300_flush_depth_stencil(&r300->context, tex, level, 0); - } - } + util_copy_framebuffer_state(&saved_fb, r300->fb_state.state); + r300_decompress_zmask_locked_unsafe(r300); + r300->context.set_framebuffer_state(&r300->context, &saved_fb); + util_unreference_framebuffer_state(&saved_fb); } /* Copy a block of pixels from one surface to another using HW. */ @@ -393,8 +399,6 @@ static void r300_hw_copy_region(struct pipe_context* pipe, struct r300_context* r300 = r300_context(pipe); r300_blitter_begin(r300, R300_COPY); - - /* Do a copy */ util_blitter_copy_region(r300->blitter, dst, dst_level, dstx, dsty, dstz, src, src_level, src_box, TRUE); r300_blitter_end(r300); @@ -409,10 +413,22 @@ static void r300_resource_copy_region(struct pipe_context *pipe, unsigned src_level, const struct pipe_box *src_box) { + struct r300_context *r300 = r300_context(pipe); + struct pipe_framebuffer_state *fb = + (struct pipe_framebuffer_state*)r300->fb_state.state; enum pipe_format old_format = dst->format; enum pipe_format new_format = old_format; const struct util_format_description *desc = util_format_description(old_format); - boolean is_depth; + + if (r300->zmask_in_use && !r300->zmask_locked) { + if (fb->zsbuf->texture == src || + fb->zsbuf->texture == dst) { + r300_decompress_zmask(r300); + } else { + r300->zmask_locked = TRUE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); + } + } if (desc->colorspace == UTIL_FORMAT_COLORSPACE_SRGB || (!pipe->screen->is_format_supported(pipe->screen, @@ -441,11 +457,6 @@ static void r300_resource_copy_region(struct pipe_context *pipe, } } - is_depth = util_format_get_component_bits(src->format, UTIL_FORMAT_COLORSPACE_ZS, 0) != 0; - if (is_depth) { - r300_flush_depth_stencil(pipe, src, src_level, src_box->z); - } - if (old_format != new_format) { r300_texture_reinterpret_format(pipe->screen, dst, new_format); @@ -462,6 +473,11 @@ static void r300_resource_copy_region(struct pipe_context *pipe, r300_texture_reinterpret_format(pipe->screen, src, old_format); } + + if (r300->zmask_locked) { + r300->zmask_locked = FALSE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); + } } void r300_init_blit_functions(struct r300_context *r300) diff --git a/src/gallium/drivers/r300/r300_chipset.c b/src/gallium/drivers/r300/r300_chipset.c index 2b183f6..15dc6d0 100644 --- a/src/gallium/drivers/r300/r300_chipset.c +++ b/src/gallium/drivers/r300/r300_chipset.c @@ -424,5 +424,7 @@ void r300_parse_chipset(struct r300_capabilities* caps) } caps->is_rv350 = caps->family >= CHIP_FAMILY_RV350; + /* XXX The 8x8 compression mode doesn't always work (piglit/fbo-depth fails). */ + caps->z_compress = /*caps->is_rv350 ? R300_ZCOMP_8X8 :*/ R300_ZCOMP_4X4; caps->dxtc_swizzle = caps->is_r400 || caps->is_r500; } diff --git a/src/gallium/drivers/r300/r300_chipset.h b/src/gallium/drivers/r300/r300_chipset.h index f2035d2..517826e 100644 --- a/src/gallium/drivers/r300/r300_chipset.h +++ b/src/gallium/drivers/r300/r300_chipset.h @@ -33,6 +33,13 @@ #define PIPE_ZMASK_SIZE 4096 #define RV3xx_ZMASK_SIZE 5120 +/* The size of a compressed tile. Each compressed tile takes 2 bits + * in the ZMASK RAM, so there is always 16 tiles per one dword. */ +enum r300_zmask_compression { + R300_ZCOMP_4X4, + R300_ZCOMP_8X8 +}; + /* Structure containing all the possible information about a specific Radeon * in the R3xx, R4xx, and R5xx families. */ struct r300_capabilities { @@ -50,10 +57,12 @@ struct r300_capabilities { unsigned num_tex_units; /* Whether or not TCL is physically present */ boolean has_tcl; - /* Some chipsets do not have HiZ RAM - other have varying amounts . */ + /* Some chipsets do not have HiZ RAM - other have varying amounts. */ int hiz_ram; - /* some chipsets have zmask ram per pipe some don't */ + /* Some chipsets have zmask ram per pipe some don't. */ int zmask_ram; + /* Compression mode for ZMASK. */ + enum r300_zmask_compression z_compress; /* Whether or not this is RV350 or newer, including all r400 and r500 * chipsets. The differences compared to the oldest r300 chips are: * - Blend LTE/GTE thresholds diff --git a/src/gallium/drivers/r300/r300_context.c b/src/gallium/drivers/r300/r300_context.c index e265bdb..552df2b 100644 --- a/src/gallium/drivers/r300/r300_context.c +++ b/src/gallium/drivers/r300/r300_context.c @@ -94,6 +94,9 @@ static void r300_release_referenced_objects(struct r300_context *r300) remove_from_list(query); FREE(query); } + + r300->context.delete_depth_stencil_alpha_state(&r300->context, + r300->dsa_decompress_zmask); } static void r300_destroy_context(struct pipe_context* context) @@ -116,9 +119,6 @@ static void r300_destroy_context(struct pipe_context* context) /* XXX: This function assumes r300->query_list was initialized */ r300_release_referenced_objects(r300); - if (r300->zmask_mm) - r300_hyperz_destroy_mm(r300); - if (r300->cs) r300->rws->cs_destroy(r300->cs); @@ -238,7 +238,7 @@ static boolean r300_setup_atoms(struct r300_context* r300) if (has_hiz_ram) R300_INIT_ATOM(hiz_clear, 0); /* zmask clear */ - R300_INIT_ATOM(zmask_clear, 0); + R300_INIT_ATOM(zmask_clear, 4); } /* ZB (unpipelined), SU. */ R300_INIT_ATOM(query_start, 4); @@ -513,6 +513,15 @@ struct pipe_context* r300_create_context(struct pipe_screen* screen, r300->dummy_vb = screen->resource_create(screen, &vb); } + { + struct pipe_depth_stencil_alpha_state dsa = {}; + dsa.depth.writemask = 1; + + r300->dsa_decompress_zmask = + r300->context.create_depth_stencil_alpha_state(&r300->context, + &dsa); + } + return &r300->context; fail: diff --git a/src/gallium/drivers/r300/r300_context.h b/src/gallium/drivers/r300/r300_context.h index 9030f1b..6e96ae8 100644 --- a/src/gallium/drivers/r300/r300_context.h +++ b/src/gallium/drivers/r300/r300_context.h @@ -406,8 +406,6 @@ struct r300_texture { /* hyper-z memory allocs */ struct mem_block *hiz_mem[R300_MAX_TEXTURE_LEVELS]; - struct mem_block *zmask_mem[R300_MAX_TEXTURE_LEVELS]; - boolean zmask_in_use[R300_MAX_TEXTURE_LEVELS]; boolean hiz_in_use[R300_MAX_TEXTURE_LEVELS]; /* This is the level tiling flags were last time set for. @@ -589,15 +587,21 @@ struct r300_context { boolean two_sided_color; /* Incompatible vertex buffer layout? (misaligned stride or buffer_offset) */ boolean incompatible_vb_layout; -#define R300_Z_COMPRESS_44 1 -#define RV350_Z_COMPRESS_88 2 - int z_compression; + boolean cbzb_clear; - boolean z_decomp_rd; + /* Whether ZMASK is enabled. */ + boolean zmask_in_use; + /* Whether ZMASK is being decompressed. */ + boolean zmask_decompress; + /* Whether ZMASK is locked, i.e. should be disabled and cannot be taken over. */ + boolean zmask_locked; + /* The zbuffer the ZMASK of which is locked. */ + struct pipe_surface *locked_zbuffer; + + void *dsa_decompress_zmask; /* two mem block managers for hiz/zmask ram space */ struct mem_block *hiz_mm; - struct mem_block *zmask_mm; /* upload managers */ struct u_upload_mgr *upload_vb; @@ -687,7 +691,9 @@ void r300_init_state_functions(struct r300_context* r300); void r300_init_resource_functions(struct r300_context* r300); /* r300_blit.c */ -void r300_flush_depth_textures(struct r300_context *r300); +void r300_decompress_zmask(struct r300_context *r300); +void r300_decompress_zmask_locked_unsafe(struct r300_context *r300); +void r300_decompress_zmask_locked(struct r300_context *r300); /* r300_query.c */ void r300_resume_query(struct r300_context *r300, @@ -713,8 +719,7 @@ void r500_emit_index_bias(struct r300_context *r300, int index_bias); /* r300_state.c */ enum r300_fb_state_change { R300_CHANGED_FB_STATE = 0, - R300_CHANGED_CBZB_FLAG, - R300_CHANGED_ZCLEAR_FLAG, + R300_CHANGED_HYPERZ_FLAG, R300_CHANGED_MULTIWRITE }; diff --git a/src/gallium/drivers/r300/r300_emit.c b/src/gallium/drivers/r300/r300_emit.c index d14cdcb..897c632 100644 --- a/src/gallium/drivers/r300/r300_emit.c +++ b/src/gallium/drivers/r300/r300_emit.c @@ -433,6 +433,7 @@ void r300_emit_fb_state(struct r300_context* r300, unsigned size, void* state) tex = r300_texture(surf->base.texture); surf_pitch = surf->pitch & R300_DEPTHPITCH_MASK; + /* HiZ RAM. */ if (r300->screen->caps.hiz_ram) { if (tex->hiz_mem[level]) { @@ -443,14 +444,10 @@ void r300_emit_fb_state(struct r300_context* r300, unsigned size, void* state) OUT_CS_REG(R300_ZB_HIZ_PITCH, 0); } } + /* Z Mask RAM. (compressed zbuffer) */ - if (tex->zmask_mem[level]) { - OUT_CS_REG(R300_ZB_ZMASK_OFFSET, tex->zmask_mem[level]->ofs << 2); - OUT_CS_REG(R300_ZB_ZMASK_PITCH, surf_pitch); - } else { - OUT_CS_REG(R300_ZB_ZMASK_OFFSET, 0); - OUT_CS_REG(R300_ZB_ZMASK_PITCH, 0); - } + OUT_CS_REG(R300_ZB_ZMASK_OFFSET, 0); + OUT_CS_REG(R300_ZB_ZMASK_PITCH, surf_pitch); } } @@ -462,6 +459,7 @@ void r300_emit_hyperz_state(struct r300_context *r300, { struct r300_hyperz_state *z = state; CS_LOCALS(r300); + if (z->flush) WRITE_CS_TABLE(&z->cb_flush_begin, size); else @@ -1097,17 +1095,6 @@ static void r300_emit_hiz_line_clear(struct r300_context *r300, int start, uint1 END_CS; } -static void r300_emit_zmask_line_clear(struct r300_context *r300, int start, uint16_t count, uint32_t val) -{ - CS_LOCALS(r300); - BEGIN_CS(4); - OUT_CS_PKT3(R300_PACKET3_3D_CLEAR_ZMASK, 2); - OUT_CS(start); - OUT_CS(count); - OUT_CS(val); - END_CS; -} - #define ALIGN_DIVUP(x, y) (((x) + (y) - 1) / (y)) void r300_emit_hiz_clear(struct r300_context *r300, unsigned size, void *state) @@ -1153,42 +1140,49 @@ void r300_emit_zmask_clear(struct r300_context *r300, unsigned size, void *state { struct pipe_framebuffer_state *fb = (struct pipe_framebuffer_state*)r300->fb_state.state; - struct r300_screen* r300screen = r300->screen; - uint32_t stride, offset = 0; - struct r300_texture* tex; - uint32_t i, height; - int mult, offset_shift; - - tex = r300_texture(fb->zsbuf->texture); - stride = tex->desc.stride_in_pixels[fb->zsbuf->u.tex.level]; + struct r300_texture *tex; + unsigned numdw, compsize, pipes; + CS_LOCALS(r300); - offset = tex->zmask_mem[fb->zsbuf->u.tex.level]->ofs; + /* The tile size of 1 DWORD is: + * + * GPU Pipes 4x4 mode 8x8 mode + * ------------------------------------------ + * R580 4P/1Z 32x32 64x64 + * RV570 3P/1Z ? ? + * RV530 1P/2Z 32x16 64x32 + */ - if (r300->z_compression == RV350_Z_COMPRESS_88) - mult = 8; - else - mult = 4; + tex = r300_texture(fb->zsbuf->texture); - height = ALIGN_DIVUP(fb->zsbuf->height, mult); + compsize = r300->screen->caps.z_compress == R300_ZCOMP_8X8 ? 8*8 : 4*4; - offset_shift = 4; - offset_shift += (r300screen->caps.num_frag_pipes / 2); - stride = ALIGN_DIVUP(stride, r300screen->caps.num_frag_pipes); + if (r300->screen->caps.family == CHIP_FAMILY_RV530) { + pipes = r300->screen->caps.num_z_pipes; + } else { + pipes = r300->screen->caps.num_frag_pipes; + } - /* okay have width in pixels - divide by block width */ - stride = ALIGN_DIVUP(stride, mult); - /* have width in blocks - divide by number of fragment pipes screen width */ + /* Get the zbuffer size. */ + numdw = align(tex->desc.stride_in_pixels[fb->zsbuf->u.tex.level], 64) * + align(fb->zsbuf->height, 64); + /* okay have size in pixels - divide by the number of pipes */ + numdw = ALIGN_DIVUP(numdw, pipes); /* 16 blocks per dword */ - stride = ALIGN_DIVUP(stride, 16); + numdw = ALIGN_DIVUP(numdw, 16); + /* divide by block size */ + numdw = ALIGN_DIVUP(numdw, compsize); - for (i = 0; i < height; i++) { - offset = i * stride; - offset <<= offset_shift; - r300_emit_zmask_line_clear(r300, offset, stride, 0x0);//0xffffffff); - } + BEGIN_CS(size); + OUT_CS_PKT3(R300_PACKET3_3D_CLEAR_ZMASK, 2); + OUT_CS(0); + OUT_CS(numdw); + OUT_CS(0); + END_CS; /* Mark the current zbuffer's zmask as in use. */ - tex->zmask_in_use[fb->zsbuf->u.tex.level] = TRUE; + r300->zmask_in_use = TRUE; + r300_mark_atom_dirty(r300, &r300->hyperz_state); } void r300_emit_ztop_state(struct r300_context* r300, diff --git a/src/gallium/drivers/r300/r300_hyperz.c b/src/gallium/drivers/r300/r300_hyperz.c index c22e307..d996d19 100644 --- a/src/gallium/drivers/r300/r300_hyperz.c +++ b/src/gallium/drivers/r300/r300_hyperz.c @@ -127,7 +127,7 @@ static boolean r300_can_hiz(struct r300_context *r300) z->current_func, dsa_state->z_stencil_control); return FALSE; } - } + } return TRUE; } @@ -139,7 +139,6 @@ static void r300_update_hyperz(struct r300_context* r300) (struct pipe_framebuffer_state*)r300->fb_state.state; struct r300_texture *zstex = fb->zsbuf ? r300_texture(fb->zsbuf->texture) : NULL; - boolean zmask_in_use = FALSE; boolean hiz_in_use = FALSE; z->gb_z_peq_config = 0; @@ -158,42 +157,40 @@ static void r300_update_hyperz(struct r300_context* r300) if (!r300->rws->get_value(r300->rws, R300_CAN_HYPERZ)) return; - zmask_in_use = zstex->zmask_in_use[fb->zsbuf->u.tex.level]; hiz_in_use = zstex->hiz_in_use[fb->zsbuf->u.tex.level]; - /* Z fastfill. */ - if (zmask_in_use) { - z->zb_bw_cntl |= R300_FAST_FILL_ENABLE; /* | R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE;*/ - } - /* Zbuffer compression. */ - if (zmask_in_use && r300->z_compression) { - z->zb_bw_cntl |= R300_RD_COMP_ENABLE; - if (r300->z_decomp_rd == false) + if (r300->zmask_in_use && !r300->zmask_locked) { + z->zb_bw_cntl |= R300_FAST_FILL_ENABLE | + /*R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE |*/ + R300_RD_COMP_ENABLE; + + if (!r300->zmask_decompress) { z->zb_bw_cntl |= R300_WR_COMP_ENABLE; + } + + if (r300->screen->caps.z_compress == R300_ZCOMP_8X8) { + z->gb_z_peq_config |= R300_GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_8_8; + } } - /* RV350 and up optimizations. */ - /* The section 10.4.9 in the docs is a lie. */ - if (r300->z_compression == RV350_Z_COMPRESS_88) - z->gb_z_peq_config |= R300_GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_8_8; - - if (hiz_in_use) { - bool can_hiz = r300_can_hiz(r300); - if (can_hiz) { - z->zb_bw_cntl |= R300_HIZ_ENABLE; - z->sc_hyperz |= R300_SC_HYPERZ_ENABLE; - z->sc_hyperz |= r300_get_sc_hz_max(r300); - z->zb_bw_cntl |= r300_get_hiz_min(r300); + + if (hiz_in_use && r300_can_hiz(r300)) { + z->zb_bw_cntl |= R300_HIZ_ENABLE | + r300_get_hiz_min(r300); + + z->sc_hyperz |= R300_SC_HYPERZ_ENABLE | + r300_get_sc_hz_max(r300); + + if (r300->screen->caps.is_r500) { + z->zb_bw_cntl |= R500_HIZ_FP_EXP_BITS_3 | + R500_HIZ_EQUAL_REJECT_ENABLE; } } /* R500-specific features and optimizations. */ if (r300->screen->caps.is_r500) { - z->zb_bw_cntl |= R500_HIZ_FP_EXP_BITS_3; - z->zb_bw_cntl |= - R500_HIZ_EQUAL_REJECT_ENABLE | - R500_PEQ_PACKING_ENABLE | - R500_COVERED_PTR_MASKING_ENABLE; + z->zb_bw_cntl |= R500_PEQ_PACKING_ENABLE | + R500_COVERED_PTR_MASKING_ENABLE; } } @@ -297,26 +294,10 @@ static void r300_update_hiz_clear(struct r300_context *r300) r300->hiz_clear.size = height * 4; } -static void r300_update_zmask_clear(struct r300_context *r300) -{ - struct pipe_framebuffer_state *fb = - (struct pipe_framebuffer_state*)r300->fb_state.state; - uint32_t height; - int mult; - - if (r300->z_compression == RV350_Z_COMPRESS_88) - mult = 8; - else - mult = 4; - - height = ALIGN_DIVUP(fb->zsbuf->height, mult); - - r300->zmask_clear.size = height * 4; -} - void r300_update_hyperz_state(struct r300_context* r300) { r300_update_ztop(r300); + if (r300->hyperz_state.dirty) { r300_update_hyperz(r300); } @@ -324,9 +305,6 @@ void r300_update_hyperz_state(struct r300_context* r300) if (r300->hiz_clear.dirty) { r300_update_hiz_clear(r300); } - if (r300->zmask_clear.dirty) { - r300_update_zmask_clear(r300); - } } void r300_hiz_alloc_block(struct r300_context *r300, struct r300_surface *surf) @@ -345,43 +323,6 @@ void r300_hiz_alloc_block(struct r300_context *r300, struct r300_surface *surf) ndw = ALIGN_DIVUP(zsize, 64); tex->hiz_mem[level] = u_mmAllocMem(r300->hiz_mm, ndw, 0, 0); - return; -} - -void r300_zmask_alloc_block(struct r300_context *r300, struct r300_surface *surf, int compress) -{ - int bsize = 256; - uint32_t zsize, ndw; - int level = surf->base.u.tex.level; - struct r300_texture *tex; - - tex = r300_texture(surf->base.texture); - - /* We currently don't handle decompression for 3D textures and cubemaps - * correctly. */ - if (tex->desc.b.b.target != PIPE_TEXTURE_1D && - tex->desc.b.b.target != PIPE_TEXTURE_2D && - tex->desc.b.b.target != PIPE_TEXTURE_RECT) - return; - - /* Cannot flush zmask of 16-bit zbuffers. */ - if (util_format_get_blocksizebits(tex->desc.b.b.format) == 16) - return; - - if (tex->zmask_mem[level]) - return; - - zsize = tex->desc.layer_size_in_bytes[level]; - zsize /= util_format_get_blocksize(tex->desc.b.b.format); - - /* each zmask dword represents 16 4x4 blocks - which is 256 pixels - or 16 8x8 depending on the gb peq flag = 1024 pixels */ - if (compress == RV350_Z_COMPRESS_88) - bsize = 1024; - - ndw = ALIGN_DIVUP(zsize, bsize); - tex->zmask_mem[level] = u_mmAllocMem(r300->zmask_mm, ndw, 0, 0); - return; } boolean r300_hyperz_init_mm(struct r300_context *r300) @@ -389,15 +330,9 @@ boolean r300_hyperz_init_mm(struct r300_context *r300) struct r300_screen* r300screen = r300->screen; int frag_pipes = r300screen->caps.num_frag_pipes; - r300->zmask_mm = u_mmInit(0, r300screen->caps.zmask_ram * frag_pipes); - if (!r300->zmask_mm) - return FALSE; - if (r300screen->caps.hiz_ram) { r300->hiz_mm = u_mmInit(0, r300screen->caps.hiz_ram * frag_pipes); if (!r300->hiz_mm) { - u_mmDestroy(r300->zmask_mm); - r300->zmask_mm = NULL; return FALSE; } } @@ -413,7 +348,4 @@ void r300_hyperz_destroy_mm(struct r300_context *r300) u_mmDestroy(r300->hiz_mm); r300->hiz_mm = NULL; } - - u_mmDestroy(r300->zmask_mm); - r300->zmask_mm = NULL; } diff --git a/src/gallium/drivers/r300/r300_hyperz.h b/src/gallium/drivers/r300/r300_hyperz.h index 30a23ec..d4c8e7c 100644 --- a/src/gallium/drivers/r300/r300_hyperz.h +++ b/src/gallium/drivers/r300/r300_hyperz.h @@ -28,8 +28,8 @@ struct r300_context; void r300_update_hyperz_state(struct r300_context* r300); void r300_hiz_alloc_block(struct r300_context *r300, struct r300_surface *surf); -void r300_zmask_alloc_block(struct r300_context *r300, struct r300_surface *surf, int compress); boolean r300_hyperz_init_mm(struct r300_context *r300); void r300_hyperz_destroy_mm(struct r300_context *r300); + #endif diff --git a/src/gallium/drivers/r300/r300_state.c b/src/gallium/drivers/r300/r300_state.c index 2664c1d..ba456d4 100644 --- a/src/gallium/drivers/r300/r300_state.c +++ b/src/gallium/drivers/r300/r300_state.c @@ -694,8 +694,7 @@ void r300_mark_fb_state_dirty(struct r300_context *r300, } if (change == R300_CHANGED_FB_STATE || - change == R300_CHANGED_CBZB_FLAG || - change == R300_CHANGED_ZCLEAR_FLAG) { + change == R300_CHANGED_HYPERZ_FLAG) { r300_mark_atom_dirty(r300, &r300->hyperz_state); } @@ -719,8 +718,8 @@ void r300_mark_fb_state_dirty(struct r300_context *r300, } static void - r300_set_framebuffer_state(struct pipe_context* pipe, - const struct pipe_framebuffer_state* state) +r300_set_framebuffer_state(struct pipe_context* pipe, + const struct pipe_framebuffer_state* state) { struct r300_context* r300 = r300_context(pipe); struct r300_aa_state *aa = (struct r300_aa_state*)r300->aa_state.state; @@ -728,7 +727,6 @@ static void boolean can_hyperz = r300->rws->get_value(r300->rws, R300_CAN_HYPERZ); unsigned max_width, max_height, i; uint32_t zbuffer_bpp = 0; - int blocksize; if (r300->screen->caps.is_r500) { max_width = max_height = 4096; @@ -744,6 +742,32 @@ static void return; } + if (old_state->zsbuf && r300->zmask_in_use && !r300->zmask_locked) { + /* There is a zmask in use, what are we gonna do? */ + if (state->zsbuf) { + if (!pipe_surface_equal(old_state->zsbuf, state->zsbuf)) { + /* Decompress the currently bound zbuffer before we bind another one. */ + r300_decompress_zmask(r300); + } + } else { + /* We don't bind another zbuffer, so lock the current one. */ + r300->zmask_locked = TRUE; + pipe_surface_reference(&r300->locked_zbuffer, old_state->zsbuf); + } + } else if (r300->zmask_locked && r300->locked_zbuffer) { + /* We have a locked zbuffer now, what are we gonna do? */ + if (state->zsbuf) { + if (!pipe_surface_equal(r300->locked_zbuffer, state->zsbuf)) { + /* We are binding some other zbuffer, so decompress the locked one, + * it gets unlocked automatically. */ + r300_decompress_zmask_locked_unsafe(r300); + } else { + /* We are binding the locked zbuffer again, so unlock it. */ + r300->zmask_locked = FALSE; + } + } + } + /* If nr_cbufs is changed from zero to non-zero or vice versa... */ if (!!old_state->nr_cbufs != !!state->nr_cbufs) { r300_mark_atom_dirty(r300, &r300->blend_state); @@ -758,14 +782,15 @@ static void util_copy_framebuffer_state(r300->fb_state.state, state); + if (!r300->zmask_locked) { + pipe_surface_reference(&r300->locked_zbuffer, NULL); + } + r300_mark_fb_state_dirty(r300, R300_CHANGED_FB_STATE); r300->validate_buffers = TRUE; - r300->z_compression = false; - if (state->zsbuf) { - blocksize = util_format_get_blocksize(state->zsbuf->texture->format); - switch (blocksize) { + switch (util_format_get_blocksize(state->zsbuf->texture->format)) { case 2: zbuffer_bpp = 16; break; @@ -773,30 +798,19 @@ static void zbuffer_bpp = 24; break; } + + /* Setup Hyper-Z. */ if (can_hyperz) { struct r300_surface *zs_surf = r300_surface(state->zsbuf); - struct r300_texture *tex; - int compress = r300->screen->caps.is_rv350 ? RV350_Z_COMPRESS_88 : R300_Z_COMPRESS_44; + struct r300_texture *tex = r300_texture(zs_surf->base.texture); int level = zs_surf->base.u.tex.level; - tex = r300_texture(zs_surf->base.texture); - /* work out whether we can support hiz on this buffer */ r300_hiz_alloc_block(r300, zs_surf); - - /* work out whether we can support zmask features on this buffer */ - r300_zmask_alloc_block(r300, zs_surf, compress); - - if (tex->zmask_mem[level]) { - /* compression causes hangs on 16-bit */ - if (zbuffer_bpp == 24) - r300->z_compression = compress; - } + DBG(r300, DBG_HYPERZ, - "hyper-z features: hiz: %d @ %08x z-compression: %d z-fastfill: %d @ %08x\n", tex->hiz_mem[level] ? 1 : 0, - tex->hiz_mem[level] ? tex->hiz_mem[level]->ofs : 0xdeadbeef, - r300->z_compression, tex->zmask_mem[level] ? 1 : 0, - tex->zmask_mem[level] ? tex->zmask_mem[level]->ofs : 0xdeadbeef); + "hyper-z features: hiz: %d @ %08x\n", tex->hiz_mem[level] ? 1 : 0, + tex->hiz_mem[level] ? tex->hiz_mem[level]->ofs : 0xdeadbeef); } /* Polygon offset depends on the zbuffer bit depth. */ diff --git a/src/gallium/drivers/r300/r300_state_derived.c b/src/gallium/drivers/r300/r300_state_derived.c index 95be784..de4c271 100644 --- a/src/gallium/drivers/r300/r300_state_derived.c +++ b/src/gallium/drivers/r300/r300_state_derived.c @@ -862,11 +862,35 @@ static void r300_merge_textures_and_samplers(struct r300_context* r300) } } -void r300_update_derived_state(struct r300_context* r300) +static void r300_decompress_depth_textures(struct r300_context *r300) { - r300_flush_depth_textures(r300); + struct r300_textures_state *state = + (struct r300_textures_state*)r300->textures_state.state; + struct pipe_resource *tex; + unsigned count = MIN2(state->sampler_view_count, + state->sampler_state_count); + unsigned i; + + if (!r300->zmask_locked || !r300->locked_zbuffer) { + return; + } + + for (i = 0; i < count; i++) { + if (state->sampler_views[i] && state->sampler_states[i]) { + tex = state->sampler_views[i]->base.texture; + if (tex == r300->locked_zbuffer->texture) { + r300_decompress_zmask_locked(r300); + return; + } + } + } +} + +void r300_update_derived_state(struct r300_context* r300) +{ if (r300->textures_state.dirty) { + r300_decompress_depth_textures(r300); r300_merge_textures_and_samplers(r300); } diff --git a/src/gallium/drivers/r300/r300_texture.c b/src/gallium/drivers/r300/r300_texture.c index a5fbe85..ca27628 100644 --- a/src/gallium/drivers/r300/r300_texture.c +++ b/src/gallium/drivers/r300/r300_texture.c @@ -743,8 +743,6 @@ static void r300_texture_destroy(struct pipe_screen *screen, for (i = 0; i < R300_MAX_TEXTURE_LEVELS; i++) { if (tex->hiz_mem[i]) u_mmFreeMem(tex->hiz_mem[i]); - if (tex->zmask_mem[i]) - u_mmFreeMem(tex->zmask_mem[i]); } FREE(tex); -- 1.7.1