Linux version 2.6.37-tmb-desktop-2mdv (mandrake@celeste.mandriva.com) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Thu Jan 6 16:51:36 UTC 2011 Command line: BOOT_IMAGE=tmb-desktop_2.6.37-2 root=UUID=97045ecd-aa19-44b6-9dfe-93c4d7690a8b resume=UUID=c837752d-094e-4efe-9d1e-d357781839eb splash=silent radeon.modeset=1 radeon.dynclks=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable) BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS) BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: 09AC/HP dx5150 MT(PV766AA), BIOS 1.19 03/08/2007 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0xbfef0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-CFFFF uncachable D0000-D3FFF write-back D4000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00BFF00000 mask FFFFF00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [ffff8800000f4500] f4500 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bfef0000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bfef0000 page 4k kernel direct mapping tables up to bfef0000 @ 1fffb000-20000000 RAMDISK: 37bfe000 - 37ff0000 ACPI: RSDP 00000000000f87a0 00014 (v00 HP ) ACPI: RSDT 00000000bfef3040 00034 (v01 HP AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 00000000bfef30c0 00084 (v02 HP AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 00000000bfef31c0 03438 (v01 HP AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 00000000bfef0000 00040 ACPI: SSDT 00000000bfef6700 000D6 (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: MCFG 00000000bfef6840 0003C (v01 HP AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 00000000bfef6640 0005E (v01 HP AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bfef0 On node 0 totalpages: 786047 DMA zone: 56 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3921 pages, LIFO batch:0 DMA32 zone: 10693 pages used for memmap DMA32 zone: 771371 pages, LIFO batch:31 SB4X0 revision 0x10 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff8800bfc00000 s71168 r8192 d23040 u1048576 pcpu-alloc: s71168 r8192 d23040 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775292 Kernel command line: BOOT_IMAGE=tmb-desktop_2.6.37-2 root=UUID=97045ecd-aa19-44b6-9dfe-93c4d7690a8b resume=UUID=c837752d-094e-4efe-9d1e-d357781839eb splash=silent radeon.modeset=1 radeon.dynclks=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ e5ca000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 3083452k/3144640k available (3335k kernel code, 452k absent, 60736k reserved, 2146k data, 464k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:2304 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 1993.831 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.66 BogoMIPS (lpj=1993831) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 tseg: 00bff00000 mce: CPU supports 5 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f SMP alternatives: switching to UP code ACPI: Core revision 20101013 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00 Brought up 1 CPUs Total of 1 processors activated (3987.66 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [a000, ffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, fe02ffff] node 0 link 0: mmio [e0000000, e03fffff] bus: [00, 03] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x000a0000-0x000bffff] bus: 00 index 2 [mem 0xc0000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) pci 0000:00:00.0: [1002:5950] type 0 class 0x000600 pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: [1002:5a34] type 1 class 0x000604 pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:05.0: [1002:5a37] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:12.0: [1002:4379] type 0 class 0x000101 pci 0000:00:12.0: reg 10: [io 0xfc00-0xfc07] pci 0000:00:12.0: reg 14: [io 0xf800-0xf803] pci 0000:00:12.0: reg 18: [io 0xf400-0xf407] pci 0000:00:12.0: reg 1c: [io 0xf000-0xf003] pci 0000:00:12.0: reg 20: [io 0xec00-0xec0f] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f1ff] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:00:12.0: supports D1 D2 pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05 pci 0000:00:14.0: reg 10: [io 0x0500-0x050f] pci 0000:00:14.0: reg 14: [mem 0xfe02b000-0xfe02b3ff] HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:14.1: [1002:4376] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xe400-0xe40f] pci 0000:00:14.3: [1002:4377] type 0 class 0x000601 pci 0000:00:14.4: [1002:4371] type 1 class 0x000604 pci 0000:00:14.5: [1002:4370] type 0 class 0x000401 pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02a0ff] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:01:00.0: [1002:71c6] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfdaf0000-0xfdafffff 64bit] pci 0000:01:00.0: reg 20: [io 0xcc00-0xccff] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:71e6] type 0 class 0x000380 pci 0000:01:00.1: reg 10: [mem 0xfdae0000-0xfdaeffff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] pci 0000:00:02.0: bridge window [mem 0xfda00000-0xfdafffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref] pci 0000:02:00.0: [14e4:1677] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [mem 0xfdef0000-0xfdefffff 64bit] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff pref] pci 0000:03:0a.0: [1106:3249] type 0 class 0x000104 pci 0000:03:0a.0: reg 10: [io 0xbc00-0xbc0f] pci 0000:03:0a.0: reg 14: [io 0xb800-0xb80f] pci 0000:03:0a.0: reg 18: [io 0xb400-0xb40f] pci 0000:03:0a.0: reg 1c: [io 0xb000-0xb00f] pci 0000:03:0a.0: reg 20: [io 0xac00-0xac1f] pci 0000:03:0a.0: reg 24: [io 0xa800-0xa8ff] pci 0000:03:0a.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xa000-0xbfff] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfcffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11) HEST: Table is not found! vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xfda00000-0xfdafffff] reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 00000000bfef0000 - 00000000bfffffff pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000dffff window] pnp 00:00: [mem 0xc0000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [io 0x0228-0x022f] pnp 00:01: [io 0x040b] pnp 00:01: [io 0x04d6] pnp 00:01: [io 0x0c00-0x0c01] pnp 00:01: [io 0x0c14] pnp 00:01: [io 0x0c50-0x0c52] pnp 00:01: [io 0x0c6c-0x0c6d] pnp 00:01: [io 0x0c6f] pnp 00:01: [io 0x0cd4-0x0cdf] pnp 00:01: [io 0x4000-0x40fe] pnp 00:01: [io 0x4210-0x4217] pnp 00:01: [mem 0x00000000-0x00000fff window] pnp 00:01: [mem 0xfee00400-0xfee00fff window] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:00:12.0 BAR 6 [mem 0x00000000-0x0007ffff pref] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:0a.0 BAR 6 [mem 0x00000000-0x0000ffff pref] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [dma 4] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0080-0x0090] pnp 00:02: [io 0x0094-0x009f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0073] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x00f0-0x00ff] pnp 00:05: [irq 13] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: [io 0x0010-0x001f] pnp 00:06: [io 0x0022-0x003f] pnp 00:06: [io 0x0062-0x0063] pnp 00:06: [io 0x0065-0x006f] pnp 00:06: [io 0x0074-0x007f] pnp 00:06: [io 0x0091-0x0093] pnp 00:06: [io 0x00a2-0x00bf] pnp 00:06: [io 0x00e0-0x00ef] pnp 00:06: [io 0x04d0-0x04d1] pnp 00:06: [io 0x0800-0x087f] pnp 00:06: [io 0x0900-0x090f] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: [io 0x03f0-0x03f5] pnp 00:07: [io 0x03f7] pnp 00:07: [irq 6] pnp 00:07: [dma 2] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:08: [io 0x03f8-0x03ff] pnp 00:08: [irq 4] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:09: [io 0x0378-0x037f] pnp 00:09: [io 0x0778-0x077b] pnp 00:09: [irq 7] pnp 00:09: [dma 3] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:0a: [irq 12] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:0b: [io 0x0060] pnp 00:0b: [io 0x0064] pnp 00:0b: [irq 1] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0c: [mem 0xe0000000-0xefffffff] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [mem 0x000d0000-0x000d3fff] pnp 00:0d: [mem 0x000f0000-0x000f7fff] pnp 00:0d: [mem 0x000f8000-0x000fbfff] pnp 00:0d: [mem 0x000fc000-0x000fffff] pnp 00:0d: [mem 0xbff00000-0xbfffffff] pnp 00:0d: [mem 0xbfef0000-0xbfefffff] pnp 00:0d: [mem 0xffff0000-0xffffffff] pnp 00:0d: [mem 0x00000000-0x0009ffff] pnp 00:0d: [mem 0x00100000-0xbfeeffff] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] pnp 00:0d: [mem 0xfec00000-0xfec00fff] pnp 00:0d: [mem 0xfee00000-0xfee00fff] pnp 00:0d: [mem 0xfff80000-0xfffeffff] pnp 00:0d: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0d: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0d: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0d: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0d: disabling [mem 0x00100000-0xbfeeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x0228-0x022f] has been reserved system 00:01: [io 0x040b] has been reserved system 00:01: [io 0x04d6] has been reserved system 00:01: [io 0x0c00-0x0c01] has been reserved system 00:01: [io 0x0c14] has been reserved system 00:01: [io 0x0c50-0x0c52] has been reserved system 00:01: [io 0x0c6c-0x0c6d] has been reserved system 00:01: [io 0x0c6f] has been reserved system 00:01: [io 0x0cd4-0x0cdf] has been reserved system 00:01: [io 0x4000-0x40fe] has been reserved system 00:01: [io 0x4210-0x4217] has been reserved system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved system 00:06: [io 0x04d0-0x04d1] has been reserved system 00:06: [io 0x0800-0x087f] has been reserved system 00:06: [io 0x0900-0x090f] has been reserved system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: [mem 0xbff00000-0xbfffffff] could not be reserved system 00:0d: [mem 0xbfef0000-0xbfefffff] could not be reserved system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved Switching to clocksource acpi_pm pci 0000:00:12.0: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xfda00000-0xfda1ffff pref] pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] pci 0000:00:02.0: bridge window [mem 0xfda00000-0xfdafffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref] pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff pref] pci 0000:03:0a.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref] pci 0000:00:14.4: PCI bridge to [bus 03-03] pci 0000:00:14.4: bridge window [io 0xa000-0xbfff] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xfcffffffff] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff pref] pci_bus 0000:03: resource 0 [io 0xa000-0xbfff] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 6 [mem 0xc0000000-0xfcffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: MSI quirk detected; MSI disabled pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4040k freed audit: initializing netlink socket (disabled) type=2000 audit(1297063831.198:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 6030 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ERST: Table is not found! Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Registering the dns_resolver key type PM: Checking hibernation image partition UUID=c837752d-094e-4efe-9d1e-d357781839eb input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 PM: Hibernation image not present or could not be loaded. registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Freeing unused kernel memory: 464k freed BFS CPU scheduler v0.363 by Con Kolivas. nash-hotplug (30): /proc/30/oom_adj is deprecated, please use /proc/30/oom_score_adj instead. SCSI subsystem initialized libata version 3.00 loaded. sata_sil 0000:00:12.0: version 2.4 sata_sil 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23 ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST3250624AS, 3.AAE, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST3250624AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 scsi2 : pata_atiixp scsi3 : pata_atiixp ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 sata_via 0000:03:0a.0: version 2.6 sata_via 0000:03:0a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 sata_via 0000:03:0a.0: routed to hard irq line 11 scsi4 : sata_via scsi5 : sata_via scsi6 : sata_via ata5: SATA max UDMA/133 port i16@0xbc00 bmdma 0xac00 irq 20 ata6: SATA max UDMA/133 port i16@0xb800 bmdma 0xac08 irq 20 ata7: PATA max UDMA/133 port i16@0xb400 bmdma 0xac10 irq 20 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata5.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 ata5.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 sd 4:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 > sd 4:0:0:0: [sdc] Attached SCSI disk ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata6.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 5:0:0:0: [sdd] Write Protect is off sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 5:0:0:0: [sdd] Attached SCSI disk PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Basic memory bitmaps freed EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl udev: starting version 153 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (27 C) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb FDC 0 is a post-1991 82077 MCE: In-kernel MCE decoding enabled. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.37-tmb-desktop-2mdv ehci_hcd usb usb1: SerialNumber: 0000:00:13.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] ppdev: user-space parallel port driver EDAC MC: Ver: 2.1.0 Jan 6 2011 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.37-tmb-desktop-2mdv ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000 EDAC amd64_edac: Ver: 3.3.0 Jan 6 2011 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.37-tmb-desktop-2mdv ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) amd64_edac: probe of 0000:00:18.2 failed with error -22 ACPI: acpi_idle registered with cpuidle rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram [drm] Initialized drm 1.1.0 20060810 usb 3-1: new low speed USB device using ohci_hcd and address 2 [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:00.0: setting latency timer to 64 [drm] initializing kernel modesetting (RV530 0x1002:0x71C6). [drm] register mmio base: 0xFDAF0000 [drm] register mmio size: 65536 ATOM BIOS: A67105 [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 1543978 kiB. [TTM] Initializing pool allocator. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: 1 quad pipes, 2 z pipes initialized. [drm] PCIE GART of 512M enabled (table at 0x00040000). radeon 0000:01:00.0: WB enabled [drm] Loading R500 Microcode [drm] radeon: ring at 0x0000000010001000 [drm] ring test succeeded in 7 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs failed to evaluate ATIF got AE_BAD_PARAMETER [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] HPD2 [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP3: INTERNAL_LVTM1 [drm] Connector 1: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [drm] Possible lm63 thermal controller at 0x4c usb 3-1: New USB device found, idVendor=09da, idProduct=0006 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: PS/2+USB Mouse usb 3-1: Manufacturer: A4Tech usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input4 a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:13.1-1/input0 [drm] fb mappable at 0xD00C0000 [drm] vram apper at 0xD0000000 [drm] size 7258112 [drm] fb depth is 24 [drm] pitch is 6912 Console: switching to colour frame buffer device 210x65 EXT4-fs (sda1): re-mounted. Opts: acl fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on minor 0 usb 3-3: new low speed USB device using ohci_hcd and address 3 usb 3-3: New USB device found, idVendor=056a, idProduct=0010 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-3: Product: ET-0405-UV1.1-1 usb 3-3: Manufacturer: WACOM powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 input: Wacom Graphire as /devices/pci0000:00/0000:00:13.1/usb3/3-3/3-3:1.0/input/input5 usbcore: registered new interface driver wacom wacom: v1.52:USB Wacom tablet driver EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) Adding 4088504k swap on /dev/sda5. Priority:-1 extents:1 across:4088504k smsc47b397: found SMSC LPC47B397-NC (base address 0x0900, revision 1) ACPI: resource smsc47b397 [io 0x0900-0x0901] conflicts with ACPI region IP__ [dma 2304-2315 64bit disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver fuse init (API version 7.15) IPv6: Loaded, but administratively disabled, reboot required to enable EDAC amd64_edac: Ver: 3.3.0 Jan 6 2011 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) amd64_edac: probe of 0000:00:18.2 failed with error -22 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x500, revision 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 5:0:0:0: Attached scsi generic sg3 type 0 tg3.c:v3.115 (October 14, 2010) tg3 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:02:00.0: setting latency timer to 64 tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751) rev 4200] (PCI Express) MAC address 00:13:d3:02:af:03 tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 vboxdrv: Found 1 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa068aaa0 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 4.0.2_OSE (interface 0x00160000). tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX NET: Registered protocol family 17 ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip6_tables: (C) 2000-2006 Netfilter Core Team NF_TPROXY: Transparent proxy support initialized, version 4.1.0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. ip_set version 4 loaded ctnetlink v0.93: registering with nfnetlink. ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully xt_time: kernel timezone is +0100 Bridge firewalling registered u32 classifier Actions configured netfilter PSD loaded - (c) astaro AG IFWLOG: register target tg3 0000:02:00.0: eth0: Link is down tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX tg3 0000:02:00.0: PME# enabled PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created Syncing filesystems ... done. Stopping fuse filesystems. Freezing user space processes ... (elapsed 0.01 seconds) done. Stopping normal filesystems. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 652343 pages) PM: Allocated 2609372 kbytes in 0.70 seconds (3727.67 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 5:0:0:0: [sdd] Synchronizing SCSI cache sd 4:0:0:0: [sdc] Synchronizing SCSI cache parport_pc 00:09: disabled serial 00:08: disabled serial 00:08: wake-up capability disabled by ACPI sd 1:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache sata_via 0000:03:0a.0: PCI INT A disabled ATI IXP AC97 controller 0000:00:14.5: PCI INT B disabled sata_sil 0000:00:12.0: PCI INT A disabled PM: freeze of devices complete after 148.898 msecs PM: late freeze of devices complete after 0.548 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... PM: Creating hibernation image: PM: Need to copy 121893 pages PM: Normal pages needed: 121893 + 1024, available pages: 664103 PM: Restoring platform NVS memory ACPI: Waking up from system sleep state S4 sata_sil 0000:00:12.0: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007) ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00017) ATI IXP AC97 controller 0000:00:14.5: restoring config space at offset 0x1 (was 0x4300007, writing 0x4300003) tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0x60000000) tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) sata_via 0000:03:0a.0: restoring config space at offset 0x1 (was 0x2900003, writing 0x2900007) PM: early restore of devices complete after 0.649 msecs pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 sata_sil 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: ffff8800b8666a00 unpin not necessary sata_via 0000:03:0a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 sd 0:0:0:0: [sda] Starting disk serial 00:08: activated [drm] radeon: 1 quad pipes, 2 z pipes initialized. parport_pc 00:09: activated sd 1:0:0:0: [sdb] Starting disk sd 4:0:0:0: [sdc] Starting disk sd 5:0:0:0: [sdd] Starting disk [drm] PCIE GART of 512M enabled (table at 0x00040000). radeon 0000:01:00.0: WB enabled [drm] radeon: ring at 0x0000000010001000 [drm] ring test succeeded in 7 usecs [drm] ib test succeeded in 0 usecs usb usb3: root hub lost power or was reset usb usb2: root hub lost power or was reset usb usb1: root hub lost power or was reset ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata2.00: configured for UDMA/100 ata6.00: configured for UDMA/133 ata5.00: configured for UDMA/133 ata1.00: configured for UDMA/100 usb 3-1: reset low speed USB device using ohci_hcd and address 2 usb 3-3: reset low speed USB device using ohci_hcd and address 3 PM: restore of devices complete after 1437.077 msecs snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities Restarting all filesystems ... Restarting tasks ... done. PM: Basic memory bitmaps freed tg3 0000:02:00.0: PME# disabled tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX