[   29.420352] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0
[   42.598395] Bluetooth: L2CAP ver 2.15
[   42.598397] Bluetooth: L2CAP socket layer initialized
[   42.750997] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   42.751000] Bluetooth: BNEP filters: protocol multicast
[   42.988297] Bluetooth: SCO (Voice Link) ver 0.6
[   42.988300] Bluetooth: SCO socket layer initialized
[   43.475446] Bluetooth: RFCOMM TTY layer initialized
[   43.475451] Bluetooth: RFCOMM socket layer initialized
[   43.475453] Bluetooth: RFCOMM ver 1.11
[   52.874845] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[   87.212667] Intel AES-NI instructions are not detected.
[   87.270528] padlock_aes: VIA PadLock not detected.
[  110.879163] wlan0: authenticate with 00:0f:cb:98:a9:5a (try 1)
[  110.886597] wlan0: authenticated
[  110.886628] wlan0: associate with 00:0f:cb:98:a9:5a (try 1)
[  110.900630] wlan0: RX AssocResp from 00:0f:cb:98:a9:5a (capab=0x401 status=0 aid=53)
[  110.900633] wlan0: associated
[  110.903212] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  110.903280] cfg80211: Calling CRDA for country: US
[  110.906726] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  110.906730] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906732] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  110.906734] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906736] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  110.906738] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906740] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  110.906742] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906744] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  110.906747] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906748] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  110.906751] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906752] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  110.906755] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906756] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  110.906759] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906761] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  110.906763] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906765] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  110.906767] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906769] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  110.906771] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[  110.906773] cfg80211: Disabling freq 2467 MHz
[  110.906774] cfg80211: Disabling freq 2472 MHz
[  110.906776] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[  110.906778] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[  110.906780] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[  110.906782] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[  110.906784] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[  110.906787] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[  110.906788] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[  110.906791] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[  110.906792] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[  110.906795] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906797] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[  110.906799] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906801] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[  110.906803] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906805] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[  110.906807] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906809] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[  110.906811] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906813] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[  110.906815] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906817] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[  110.906819] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906821] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[  110.906823] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906825] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[  110.906828] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906829] cfg80211: Disabling freq 5600 MHz
[  110.906831] cfg80211: Disabling freq 5620 MHz
[  110.906832] cfg80211: Disabling freq 5640 MHz
[  110.906833] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[  110.906836] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906838] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[  110.906840] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906842] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[  110.906844] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[  110.906846] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[  110.906848] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[  110.906850] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[  110.906852] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[  110.906854] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[  110.906856] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[  110.906858] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[  110.906860] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[  110.906862] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[  110.906864] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[  110.906868] cfg80211: Regulatory domain changed to country: US
[  110.906869] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  110.906871] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  110.906874] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  110.906876] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  110.906878] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  110.906880] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  110.906882] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  121.020046] wlan0: no IPv6 routers present
[  129.110022] teredo: no IPv6 routers present
[  167.323424] exe (2390): /proc/2390/oom_adj is deprecated, please use /proc/2390/oom_score_adj instead.
[  560.650086] usb 2-1: new high speed USB device using ehci_hcd and address 2
[  560.913525] usbcore: registered new interface driver uas
[  560.947512] Initializing USB Mass Storage driver...
[  560.947668] scsi6 : usb-storage 2-1:1.0
[  560.948160] usbcore: registered new interface driver usb-storage
[  560.948162] USB Mass Storage support registered.
[  561.941136] scsi 6:0:0:0: Direct-Access     USB0912B Flash Disk       5.00 PQ: 0 ANSI: 2
[  561.942901] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  561.945436] sd 6:0:0:0: [sdb] 7895040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[  561.947401] sd 6:0:0:0: [sdb] Write Protect is off
[  561.947410] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[  561.948666] sd 6:0:0:0: [sdb] No Caching mode page present
[  561.948675] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  561.952167] sd 6:0:0:0: [sdb] No Caching mode page present
[  561.952176] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  561.952991]  sdb: sdb1
[  561.955669] sd 6:0:0:0: [sdb] No Caching mode page present
[  561.955677] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  561.955684] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4077.669762] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 4078.004850] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 4078.004861] ata2.00: irq_stat 0x00400000, PHY RDY changed
[ 4078.004868] ata2: SError: { PHYRdyChg CommWake }
[ 4078.004877] sr 1:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4078.004909] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4078.004912]          res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 4078.004919] ata2.00: status: { DRDY }
[ 4078.004929] ata2: hard resetting link
[ 4078.980058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4078.984680] ata2.00: configured for UDMA/33
[ 4079.000074] ata2: EH complete
[ 4082.541898] usb 2-1: USB disconnect, address 2
[ 5671.502163] wlan0: deauthenticating from 00:0f:cb:98:a9:5a by local choice (reason=3)
[ 5671.510417] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 5671.510421] cfg80211: Restoring regulatory settings
[ 5671.510431] cfg80211: Calling CRDA to update world regulatory domain
[ 5672.136142] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 5672.136148] cfg80211: World regulatory domain updated:
[ 5672.136150] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5672.136152] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5672.136155] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5672.136157] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5672.136159] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5672.136161] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5673.966725] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 5675.734099] PM: Syncing filesystems ... done.
[ 5675.743021] PM: Preparing system for mem sleep
[ 5676.110424] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5676.130270] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 5676.150360] PM: Entering mem sleep
[ 5676.150375] Suspending console(s) (use no_console_suspend to debug)
[ 5676.151178] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5676.151375] sd 0:0:0:0: [sda] Stopping disk
[ 5676.169638] serial 00:09: disabled
[ 5676.170081] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 5676.170091] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 5676.170100] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 5676.170108] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 5676.170820] ACPI handle has no context!
[ 5676.170826] sdhci-pci 0000:03:01.2: PCI INT C disabled
[ 5676.170832] ACPI handle has no context!
[ 5676.170877] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 5676.170886] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 5676.170895] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 5676.171079] e1000e 0000:00:19.0: PCI INT A disabled
[ 5676.171085] e1000e 0000:00:19.0: PME# enabled
[ 5676.171093]  pci0000:00: wake-up capability enabled by ACPI
[ 5676.180053] ACPI handle has no context!
[ 5676.190063] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 5676.280198] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 5676.300018] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 129.893 msecs
[ 5676.986779] PM: suspend of drv:sd dev:0:0:0:0 complete after 835.604 msecs
[ 5676.986793] PM: suspend of drv:scsi dev:target0:0:0 complete after 835.568 msecs
[ 5676.986806] PM: suspend of drv:scsi dev:host0 complete after 835.458 msecs
[ 5677.000018] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 829.966 msecs
[ 5677.000030] PM: suspend of drv: dev:pci0000:00 complete after 828.446 msecs
[ 5677.000038] PM: suspend of devices complete after 849.206 msecs
[ 5677.000040] PM: suspend devices took 0.850 seconds
[ 5677.060272] PM: late suspend of devices complete after 60.228 msecs
[ 5677.060604] ACPI: Preparing to enter system sleep state S3
[ 5677.090451] PM: Saving platform NVS memory
[ 5677.090748] Disabling non-boot CPUs ...
[ 5677.210020] CPU 1 is now offline
[ 5677.210386] Extended CMOS year: 2000
[ 5677.210386] Back to C!
[ 5677.210386] PM: Restoring platform NVS memory
[ 5677.210386] Extended CMOS year: 2000
[ 5677.210386] Enabling non-boot CPUs ...
[ 5677.210386] Booting Node 0 Processor 1 APIC 0x1
[ 5677.380016] Switched to NOHz mode on CPU #1
[ 5677.380078] CPU1 is up
[ 5677.380700] ACPI: Waking up from system sleep state S3
[ 5677.580514] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 5677.580523] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0xef99)
[ 5677.580528] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xe000000c)
[ 5677.580534] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 5677.580565] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xf6b00004)
[ 5677.580570] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 5677.580598] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 5677.580618] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xefe1)
[ 5677.580624] e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xf6adb000)
[ 5677.580630] e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6ae0000)
[ 5677.580640] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 5677.580675] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[ 5677.580692] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x6f61)
[ 5677.580708] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 5677.580736] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 5677.580752] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f81)
[ 5677.580768] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 5677.580795] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[ 5677.580812] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x6fa1)
[ 5677.580829] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 5677.580890] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 5677.580934] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 5677.580959] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xfebfc004, writing 0xf6adc004)
[ 5677.580965] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 5677.580972] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102)
[ 5677.581014] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100)
[ 5677.581029] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf431f421)
[ 5677.581035] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf410f400)
[ 5677.581043] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
[ 5677.581049] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00)
[ 5677.581057] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 5677.581066] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 5677.581131] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20200)
[ 5677.581147] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf451f441)
[ 5677.581154] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf690f690)
[ 5677.581160] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
[ 5677.581166] pcieport 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0xc0c00)
[ 5677.581174] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 5677.581183] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 5677.581247] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x20300)
[ 5677.581263] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf491f481)
[ 5677.581269] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf470f460)
[ 5677.581275] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[ 5677.581280] pcieport 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0xd0d00)
[ 5677.581290] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 5677.581298] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 5677.581379] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 5677.581407] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 5677.581424] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f21)
[ 5677.581440] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 5677.581467] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[ 5677.581484] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6f41)
[ 5677.581500] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 5677.581560] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 5677.581605] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf3f1f001)
[ 5677.581613] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x22805050)
[ 5677.581619] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20030300, writing 0x20070300)
[ 5677.581690] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
[ 5677.581734] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[ 5677.581763] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 5677.581810] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x203)
[ 5677.581833] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xf6adaf04)
[ 5677.581843] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800103)
[ 5677.581898] iwlagn 0000:0c:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[ 5677.581941] iwlagn 0000:0c:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf69fe004)
[ 5677.581951] iwlagn 0000:0c:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 5677.581965] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[ 5677.582060] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a)
[ 5677.582066] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xe (was 0x0, writing 0x54fc)
[ 5677.582072] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xd (was 0x0, writing 0x5400)
[ 5677.582078] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xc (was 0x0, writing 0x50fc)
[ 5677.582084] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xb (was 0x0, writing 0x5000)
[ 5677.582090] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xa (was 0x0, writing 0xf4fff000)
[ 5677.582096] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x9 (was 0x0, writing 0xf4c00000)
[ 5677.582102] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x8 (was 0x0, writing 0xf3fff000)
[ 5677.582108] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0000000)
[ 5677.582114] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0070403)
[ 5677.582122] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6800000)
[ 5677.582129] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a810)
[ 5677.582137] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[ 5677.582165] yenta_cardbus 0000:03:01.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 5677.582168] yenta_cardbus 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[ 5677.582210] firewire_ohci 0000:03:01.1: restoring config space at offset 0xf (was 0x4020200, writing 0x4020203)
[ 5677.582236] firewire_ohci 0000:03:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 5677.582244] firewire_ohci 0000:03:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 5677.582275] sdhci-pci 0000:03:01.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[ 5677.582299] sdhci-pci 0000:03:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xf68ff700)
[ 5677.582307] sdhci-pci 0000:03:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 5677.582315] sdhci-pci 0000:03:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 5677.583383] PM: early resume of devices complete after 3.134 msecs
[ 5677.583493] i915 0000:00:02.0: setting latency timer to 64
[ 5677.583946]  pci0000:00: wake-up capability disabled by ACPI
[ 5677.583952] e1000e 0000:00:19.0: PME# disabled
[ 5677.584056] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 5677.586206] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5677.586215] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5677.586248] usb usb3: root hub lost power or was reset
[ 5677.586268] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5677.586275] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5677.586305] usb usb4: root hub lost power or was reset
[ 5677.586323] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5677.586330] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5677.586359] usb usb5: root hub lost power or was reset
[ 5677.586380] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5677.586388] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5677.586446] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5677.586455] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5677.586508] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5677.586575] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5677.586583] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5677.586614] usb usb6: root hub lost power or was reset
[ 5677.586632] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5677.586639] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5677.586669] usb usb7: root hub lost power or was reset
[ 5677.586686] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5677.586694] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5677.586723] usb usb8: root hub lost power or was reset
[ 5677.586744] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5677.586752] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5677.586800] pci 0000:00:1e.0: setting latency timer to 64
[ 5677.586824] ahci 0000:00:1f.2: setting latency timer to 64
[ 5677.586926] sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5677.588836] sd 0:0:0:0: [sda] Starting disk
[ 5677.660194] firewire_core: skipped bus generations, destroying all nodes
[ 5677.694374] PM: resume of drv:button dev:PNP0C0D:00 complete after 110.499 msecs
[ 5677.711088] PM: resume of drv:usb dev:usb4 complete after 122.925 msecs
[ 5677.711196] PM: resume of drv:usb dev:usb6 complete after 122.859 msecs
[ 5677.711256] PM: resume of drv:usb dev:usb7 complete after 122.834 msecs
[ 5677.711311] PM: resume of drv:usb dev:usb8 complete after 122.807 msecs
[ 5677.711340] PM: resume of drv:hub dev:4-0:1.0 complete after 123.156 msecs
[ 5677.711361] PM: resume of drv: dev:ep_00 complete after 123.137 msecs
[ 5677.711379] PM: resume of drv:hub dev:6-0:1.0 complete after 123.019 msecs
[ 5677.711400] PM: resume of drv: dev:ep_00 complete after 122.999 msecs
[ 5677.711418] PM: resume of drv:hub dev:7-0:1.0 complete after 122.971 msecs
[ 5677.711438] PM: resume of drv: dev:ep_00 complete after 122.951 msecs
[ 5677.711453] PM: resume of drv:hub dev:8-0:1.0 complete after 122.922 msecs
[ 5677.711473] PM: resume of drv: dev:ep_00 complete after 122.902 msecs
[ 5677.711491] PM: resume of drv: dev:ep_81 complete after 123.285 msecs
[ 5677.711505] PM: resume of drv: dev:ep_81 complete after 123.127 msecs
[ 5677.711522] PM: resume of drv: dev:ep_81 complete after 123.055 msecs
[ 5677.711536] PM: resume of drv: dev:ep_81 complete after 122.985 msecs
[ 5677.720323] PM: resume of drv:i915 dev:0000:00:02.0 complete after 136.831 msecs
[ 5677.789501] dell-wmi: Received unknown WMI event (0x11)
[ 5677.820110] PM: resume of drv:usb dev:usb3 complete after 232.006 msecs
[ 5677.820165] PM: resume of drv:usb dev:usb5 complete after 231.913 msecs
[ 5677.820179] PM: resume of drv:hub dev:3-0:1.0 complete after 232.068 msecs
[ 5677.820207] PM: resume of drv: dev:ep_00 complete after 232.092 msecs
[ 5677.820216] PM: resume of drv:hub dev:5-0:1.0 complete after 231.931 msecs
[ 5677.820230] PM: resume of drv: dev:ep_81 complete after 232.119 msecs
[ 5677.820246] PM: resume of drv: dev:ep_00 complete after 231.930 msecs
[ 5677.820252] PM: resume of drv: dev:ep_81 complete after 231.955 msecs
[ 5677.827975] PM: resume of drv:battery dev:PNP0C0A:00 complete after 133.562 msecs
[ 5677.870749] PM: resume of drv:usb dev:usb1 complete after 282.772 msecs
[ 5677.870791] PM: resume of drv:hub dev:1-0:1.0 complete after 282.731 msecs
[ 5677.870813] PM: resume of drv: dev:ep_00 complete after 282.746 msecs
[ 5677.870831] PM: resume of drv: dev:ep_81 complete after 282.766 msecs
[ 5677.912419] serial 00:09: activated
[ 5677.970311] ata6: SATA link down (SStatus 0 SControl 300)
[ 5677.990307] ata5: SATA link down (SStatus 0 SControl 300)
[ 5677.990382] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[ 5678.154561] PM: resume of drv:usb dev:5-1 complete after 565.835 msecs
[ 5678.154623] PM: resume of drv:usb dev:5-1:0.0 complete after 565.881 msecs
[ 5678.154685] PM: resume of drv: dev:ep_00 complete after 565.708 msecs
[ 5678.154731] PM: resume of drv: dev:ep_85 complete after 565.932 msecs
[ 5678.154741] PM: resume of drv:usb dev:5-1:0.1 complete after 565.914 msecs
[ 5678.154768] PM: resume of drv: dev:ep_01 complete after 565.992 msecs
[ 5678.154784] PM: resume of drv: dev:ep_81 complete after 566.026 msecs
[ 5678.154809] PM: resume of drv: dev:ep_86 complete after 565.858 msecs
[ 5678.154818] PM: resume of drv: dev:ep_82 complete after 565.898 msecs
[ 5678.154847] PM: resume of drv: dev:ep_02 complete after 565.916 msecs
[ 5678.160374] firewire_core: rediscovered device fw0
[ 5678.220378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5678.223144] ata2.00: configured for UDMA/33
[ 5678.250382] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 5678.476515] dell-wmi: Received unknown WMI event (0x11)
[ 5678.614129] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input14
[ 5678.640321] PM: resume of drv:usb dev:3-1 complete after 1051.680 msecs
[ 5678.640388] PM: resume of drv:hub dev:3-1:1.0 complete after 1051.725 msecs
[ 5678.640456] PM: resume of drv: dev:ep_00 complete after 1051.757 msecs
[ 5678.640495] PM: resume of drv: dev:ep_81 complete after 1051.822 msecs
[ 5678.643405] PM: resume of drv:usb dev:3-1.3 complete after 1054.232 msecs
[ 5678.643459] PM: resume of drv:btusb dev:3-1.3:1.1 complete after 1054.192 msecs
[ 5678.643469] PM: resume of drv:btusb dev:3-1.3:1.0 complete after 1054.282 msecs
[ 5678.643490] PM: resume of drv:usb dev:3-1.3:1.2 complete after 1054.168 msecs
[ 5678.643508] PM: resume of drv: dev:ep_00 complete after 1054.106 msecs
[ 5678.643524] PM: resume of drv:usb dev:3-1.3:1.3 complete after 1054.143 msecs
[ 5678.643531] PM: resume of drv: dev:ep_81 complete after 1054.324 msecs
[ 5678.643541] PM: resume of drv: dev:ep_83 complete after 1054.258 msecs
[ 5678.643549] PM: resume of drv: dev:ep_82 complete after 1054.327 msecs
[ 5678.643559] PM: resume of drv: dev:ep_03 complete after 1054.255 msecs
[ 5678.643621] PM: resume of drv: dev:ep_02 complete after 1054.381 msecs
[ 5678.643630] PM: resume of drv: dev:ep_04 complete after 1054.263 msecs
[ 5678.643640] PM: resume of drv: dev:ep_84 complete after 1054.295 msecs
[ 5678.722393] usb 3-1.1: reset full speed USB device using uhci_hcd and address 3
[ 5678.838401] PM: resume of drv:usb dev:3-1.1 complete after 1249.397 msecs
[ 5678.838506] PM: resume of drv:usbhid dev:3-1.1:1.0 complete after 1249.487 msecs
[ 5678.838513] PM: resume of drv: dev:ep_00 complete after 1249.446 msecs
[ 5678.838532] PM: resume of drv: dev:ep_81 complete after 1249.499 msecs
[ 5678.902389] usb 3-1.2: reset full speed USB device using uhci_hcd and address 4
[ 5679.021184] PM: resume of drv:usb dev:3-1.2 complete after 1432.108 msecs
[ 5679.021281] PM: resume of drv:usb dev:3-1.2:1.0 complete after 1432.190 msecs
[ 5679.021299] PM: resume of drv: dev:ep_00 complete after 1432.170 msecs
[ 5679.021312] PM: resume of drv: dev:ep_81 complete after 1432.197 msecs
[ 5679.450310] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5679.559738] ata1.00: configured for UDMA/100
[ 5679.590131] PM: resume of drv:sd dev:0:0:0:0 complete after 2001.285 msecs
[ 5679.590218] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2001.321 msecs
[ 5679.590229] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1675.028 msecs
[ 5679.750291] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 142.159 msecs
[ 5679.750557] PM: resume of devices complete after 2167.133 msecs
[ 5679.751548] PM: resume devices took 2.170 seconds
[ 5679.751704] PM: Finishing wakeup.
[ 5679.751710] Restarting tasks ... 
[ 5679.771141] usb 3-1.3: USB disconnect, address 5
[ 5679.806979] done.
[ 5679.807005] video LNXVIDEO:01: Restoring backlight state
[ 5680.180582] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 5680.240206] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 5680.241826] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5680.280097] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5683.059968] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 5685.010338] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 5685.759776] wlan0: authenticate with 00:0f:cb:98:a9:5a (try 1)
[ 5685.765711] wlan0: authenticated
[ 5685.765745] wlan0: associate with 00:0f:cb:98:a9:5a (try 1)
[ 5685.773137] wlan0: RX AssocResp from 00:0f:cb:98:a9:5a (capab=0x401 status=0 aid=63)
[ 5685.773140] wlan0: associated
[ 5685.775836] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5685.775897] cfg80211: Calling CRDA for country: US
[ 5685.780099] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780103] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780105] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780107] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780109] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780112] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780114] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780116] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780118] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780120] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780122] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780124] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780126] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780128] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780130] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780132] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780134] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780136] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780138] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780140] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780142] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780145] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[ 5685.780146] cfg80211: Disabling freq 2467 MHz
[ 5685.780148] cfg80211: Disabling freq 2472 MHz
[ 5685.780149] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780152] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[ 5685.780154] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780156] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[ 5685.780158] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780160] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[ 5685.780162] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780164] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[ 5685.780166] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780168] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780170] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780172] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780174] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780176] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780178] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780180] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780182] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780185] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780187] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780189] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780191] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780193] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780195] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780197] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780199] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780201] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780203] cfg80211: Disabling freq 5600 MHz
[ 5685.780204] cfg80211: Disabling freq 5620 MHz
[ 5685.780206] cfg80211: Disabling freq 5640 MHz
[ 5685.780207] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780210] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780211] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780214] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780215] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780218] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 5685.780220] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780222] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[ 5685.780224] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780226] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[ 5685.780228] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780230] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[ 5685.780232] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780234] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[ 5685.780236] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 5685.780238] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[ 5685.780242] cfg80211: Regulatory domain changed to country: US
[ 5685.780243] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5685.780245] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 5685.780248] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 5685.780250] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5685.780252] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5685.780254] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5685.780256] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 5696.120034] wlan0: no IPv6 routers present
[ 5697.810040] teredo: no IPv6 routers present
[ 5804.365213] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0
[11247.107943] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[19407.674041] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[24216.323054] do_general_protection: 15 callbacks suppressed
[24216.323060] soffice.bin[13244] general protection ip:7faa6952e029 sp:7fff2eba8cf0 error:0 in libuno_cppuhelpergcc3.so.3[7faa6950f000+c8000]
[25061.066318] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[25075.980717] dell-wmi: Received unknown WMI event (0x11)
[25077.119830] dell-wmi: Received unknown WMI event (0x11)
[25105.005882] dell-wmi: Received unknown WMI event (0x11)
[25106.092815] dell-wmi: Received unknown WMI event (0x11)
[25374.102016] dell-wmi: Received unknown WMI event (0x11)
[25375.165000] dell-wmi: Received unknown WMI event (0x11)
[25393.204340] dell-wmi: Received unknown WMI event (0x11)
[25394.312960] dell-wmi: Received unknown WMI event (0x11)
[25408.233028] dell-wmi: Received unknown WMI event (0x11)
[25409.350355] dell-wmi: Received unknown WMI event (0x11)
[25442.781323] dell-wmi: Received unknown WMI event (0x11)
[25443.842648] dell-wmi: Received unknown WMI event (0x11)
[25482.459471] dell-wmi: Received unknown WMI event (0x11)
[25499.878871] dell-wmi: Received unknown WMI event (0x11)
[26606.514314] dell-wmi: Received unknown WMI event (0x11)
[28264.036420] dell-wmi: Received unknown WMI event (0x11)
[34640.507160] dell-wmi: Received unknown WMI event (0x11)
[36971.879669] dell-wmi: Received unknown WMI event (0x11)
[37023.491867] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[40095.541489] dell-wmi: Received unknown WMI event (0x11)
[40101.650248] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[40101.654325] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 6454418 at 6454404, next 6454429)
[40102.170060] [drm:i915_reset] *ERROR* Failed to reset chip.
[40102.171803] compiz[1781]: segfault at 0 ip 00007fcbd43b4318 sp 00007fffff338a88 error 6 in libc-2.13.so[7fcbd427d000+19b000]