# Този файл е генериран автоматично от скрипта /vslive/vslive-xorg.conf.bash # Последна промяна: нд яну 22 20:51:37 EET 2006 # # Промените, които правите тук ще бъдат изгубени при следващото # стартиране на скрипта /vslive/vslive-xorg.conf.bash # # # ********************************************************************** # Вижте man страницата XF86Config за информация, относно структурата # на този файл. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the font modules Load "type1" Load "freetype" # Load "speedo" # This loads the GLX module Load "glx" Load "ddc" # ddc probing of monitor # Поддръжка на TouchPad (без него някои функции може да не работят) Load "synaptics" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # # FontPath "unix/:7100" FontPath "/usr/X11R6/lib/X11/fonts/local/terminus/" FontPath "/opt/kde/share/fonts/" FontPath "/usr/X11R6/lib/X11/fonts/local/misc/" # Шрифтове с кодиране Unicode: FontPath "/usr/X11R6/lib/X11/fonts/local/bolkhov/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/local/bolkhov/misc/" FontPath "/usr/X11R6/lib/X11/fonts/local/cronyx/misc/" FontPath "/usr/X11R6/lib/X11/fonts/local/cronyx/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/local/cronyx/100dpi/" # Шрифтове с кодиране cp1251: FontPath "/usr/X11R6/lib/X11/fonts/local/cp1251/bolkhov/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/local/cp1251/bolkhov/misc/" FontPath "/usr/X11R6/lib/X11/fonts/local/cp1251/cronyx/misc/" FontPath "/usr/X11R6/lib/X11/fonts/local/cp1251/cronyx/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/local/cp1251/cronyx/100dpi/" # Най-основните растерни шрифтове FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # Векторни шрифтове FontPath "/usr/X11R6/lib/X11/fonts/local/type1/" FontPath "/usr/X11R6/lib/X11/fonts/local/ttf/" # ModulePath can be used to set a search path for the X server modules. # The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" Option "AllowMouseOpenFail" "true" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events. # Option "DontVTSwitch" # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # Option "DontZoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" # Set the basic blanking screen saver timeout. # Option "blank time" "10" # 10 minutes # Set the DPMS timeouts. These are set here because they are global # rather than screen-specific. These settings alone don't enable DPMS. # It is enabled per-screen (or per-monitor), and even then only when # the driver supports it. # Option "standby time" "20" # Option "suspend time" "30" # Option "off time" "60" # On some platform the server needs to estimate the sizes of PCI # memory and pio ranges. This is done by assuming that PCI ranges # don't overlap. Some broken BIOSes tend to set ranges of inactive # devices wrong. Here one can adjust how aggressive the assumptions # should be. Default is 0. # Option "EstimateSizesAggresively" "0" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "kbd" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" # Set the keyboard auto repeat parameters. Not all platforms implement # this. # Option "AutoRepeat" "500 5" # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a European # keyboard, you will probably want to use one of: # # Option "XkbModel" "pc102" # Option "XkbModel" "pc105" # # If you have a Microsoft Natural keyboard, you can use: # # Option "XkbModel" "microsoft" # # If you have a US "windows" keyboard you will want: # # Option "XkbModel" "pc104" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # # Option "XkbLayout" "de" # # or: # # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for X.Org # # Option "XkbRules" "xorg" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # За да може да се превключва между английска, фонетична и БДС клавиатура: # Option "XkbLayout" "us,bg(phonetic),bg" # За същата цел: # Option "XkbLayout" "us,bg,bg" # Option "XkbVariant" ",phonetic,bds" # За да може да се превключва между английска и фонетична клавиатурна подердба: Option "XkbLayout" "us,bg(phonetic)" # Превключването става с натискане на Control и Shift едновременно: Option "XkbOptions" "grp:ctrl_shift_toggle" EndSection Section "InputDevice" Identifier "Keyboard_bds" Driver "kbd" Option "XkbLayout" "us,bg" Option "XkbVariant" ",bds" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Keyboard_new_bds" Driver "kbd" Option "XkbLayout" "us,bg" Option "XkbVariant" ",bds_new" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Keyboard_phonetic" Driver "kbd" Option "XkbLayout" "us,bg" Option "XkbVariant" ",phonetic" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Keyboard_new_phonetic" Driver "kbd" Option "XkbLayout" "us,bg" Option "XkbVariant" ",phonetic_new" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Keyboard_phonetic_intl" Driver "kbd" Option "XkbLayout" "us,bg" Option "XkbVariant" ",phonetic_intl" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" # On platforms where PnP mouse detection is supported the following # protocol setting can be used when using a newer PnP mouse: # Option "Protocol" "Auto" # The available mouse protocols types that you can set below are: # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2 # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2 # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse # ThinkingMouse ThinkingMousePS/2 Xqueue Option "Protocol" "PS/2" # The mouse device. The device is normally set to /dev/mouse, # which is usually a symbolic link to the real device. Option "Device" "/dev/mouse" # Option "Device" "/dev/psaux" # Option "Device" "/dev/ttyS0" # Option "Device" "/dev/ttyS1" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # Some examples of extended input devices # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "ZAxisMapping" "4 5" Option "Protocol" "intellimouse" Option "Device" "/dev/mouse" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "Serial Mouse COM1" Driver "mouse" Option "ZAxisMapping" "4 5" Option "Protocol" "intellimouse" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "Serial Mouse COM2" Driver "mouse" Option "ZAxisMapping" "4 5" Option "Protocol" "intellimouse" Option "Device" "/dev/ttyS1" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "Serial Mouse COM1 MS" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "Serial Mouse COM2 MS" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS1" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic PS/2 Wheel Mouse" Driver "mouse" Option "Protocol" "ImPS/2" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Не работи с моята мишка (трябва да се промени протокола на intellimouse) # (бел. В.С.) Section "InputDevice" Identifier "Serial Mouse AUTO" Driver "mouse" Option "ZAxisMapping" "4 5" Option "Protocol" "auto" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection # Тествал съм го с моята мишка и работи (бел. В.С.) Section "InputDevice" Identifier "USB Mouse AUTO" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Тествал съм го без мишка и не създава проблеми (бел. В.С.) Section "InputDevice" Identifier "PS/2 Mouse AUTO" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" Option "ZAxisMapping" "4 5" EndSection # Примерни настройки на Touchpad: # За да разберете какъв модел е Touchpad-а Ви, вижте какво # пише във файла "/proc/bus/input/devices". # Повече информация може да намерите на: # http://gentoo-wiki.com/HARDWARE_Synaptics_Touchpad # Това са настройки за TouchPad от тип Synaptics Section "InputDevice" Driver "synaptics" Identifier "TouchPad_Synaptics" # Пробвал съм с "/dev/input/mice" при включена USB мишка (+ настройки за нея) # и работи. Таке не се налага да се указва кое точно устройство е TouchPad-а. Option "Device" "/dev/input/mice" # Ако има проблеми пробвайте следващия ред вместо горния: # Option "Device" "/dev/input/mouse0" # задава се номера на у-вото! Option "Protocol" "auto-dev" Option "LeftEdge" "1700" Option "RightEdge" "5300" Option "TopEdge" "1700" Option "BottomEdge" "4200" Option "FingerLow" "25" Option "FingerHigh" "30" Option "MaxTapTime" "180" Option "MaxTapMove" "220" Option "VertScrollDelta" "100" Option "MinSpeed" "0.09" Option "MaxSpeed" "0.18" Option "AccelFactor" "0.0015" Option "SHMConfig" "on" EndSection Section "InputDevice" Driver "synaptics" Identifier "TouchPad_ALPS" # Предполагам, че така ще работи: Option "Device" "/dev/input/mice" # Ако има проблеми пробвайте следващия ред вместо горния: # Option "Device" "/dev/input/mouse0" # задава се номера на у-вото! Option "Protocol" "auto-dev" Option "LeftEdge" "130" Option "RightEdge" "840" Option "TopEdge" "130" Option "BottomEdge" "640" Option "FingerLow" "7" Option "FingerHigh" "8" Option "MaxTapTime" "180" Option "MaxTapMove" "110" Option "EmulateMidButtonTime" "75" Option "VertScrollDelta" "20" Option "HorizScrollDelta" "20" Option "MinSpeed" "0.60" Option "MaxSpeed" "1.10" Option "AccelFactor" "0.030" Option "EdgeMotionMinSpeed" "200" Option "EdgeMotionMaxSpeed" "200" Option "UpDownScrolling" "1" Option "CircularScrolling" "1" Option "CircScrollDelta" "0.1" Option "CircScrollTrigger" "2" Option "SHMConfig" "on" Option "Emulate3Buttons" "on" EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Auto_Configured_Card" Driver "nv" # Option "NoAccel" "on" # Option "ShadowFB" "on" # Option "UseFBDev" "on" # да не се ползва!!! забива VendorName "nVidia Corporation" BoardName "NV34 [GeForce FX 5500]" EndSection # ********************************************************************** # Monitor section # ********************************************************************** Section "Monitor" Identifier "Auto_Configured_Monitor" Option "DPMS" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors VertRefresh 50.0 - 75.0 # Very conservative. May flicker. # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default. # Default modes distilled from # "VESA and Industry Standards and Guide for Computer Display Monitor # Timing", version 1.0, revision 0.8, adopted September 17, 1998. # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $ # 640x350 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync # 640x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync # 720x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync # 640x480 @ 72Hz (VESA) hsync: 37.9kHz ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync # 640x480 @ 75Hz (VESA) hsync: 37.5kHz ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480 @ 85Hz (VESA) hsync: 43.3kHz ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync # 800x600 @ 56Hz (VESA) hsync: 35.2kHz ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync # 800x600 @ 60Hz (VESA) hsync: 37.9kHz ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync # 800x600 @ 72Hz (VESA) hsync: 48.1kHz ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600 @ 75Hz (VESA) hsync: 46.9kHz ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600 @ 85Hz (VESA) hsync: 53.7kHz ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync # Additional modelines ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # Extended modelines with GTF timings # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "Auto_Configured_Screen" Device "Auto_Configured_Card" Monitor "Auto_Configured_Monitor" # If your card can handle it, a higher default color depth (like 24 or 32) # is highly recommended. # DefaultDepth 8 # DefaultDepth 16 DefaultDepth 24 # DefaultDepth 32 Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** Section "ServerLayout" Identifier "Auto_Configured_Layout" Screen "Auto_Configured_Screen" InputDevice "Keyboard_phonetic" "CoreKeyboard" InputDevice "PS/2 Mouse AUTO" "CorePointer" InputDevice "Serial Mouse COM1" "CorePointer" # ******** Ако имате TouchPad: # За да включите TouchPad махнете знака за коментар САМО НА ЕДИН от двата реда # с примерни настройки. # Двата типа устройства са с несъвместими настройки - много е важно да изберете # правилните настройки. За подорбности: # http://gentoo-wiki.com/HARDWARE_Synaptics_Touchpad # Също така е добре да прочетете какво е написано горе при настройките # на TouchPad-овете. # # В секцията Module трябва да присъства този ред (разбира се без знак за коментар): # Load "synaptics" #InputDevice "TouchPad_Synaptics" "AlwaysCore" # първи пример #InputDevice "TouchPad_ALPS" "AlwaysCore" # втори пример EndSection