Mar 02 10:27:23 [kernel] pci 0000:00:01.0: [1106:b099] type 1 class 0x000604
Mar 02 10:27:23 [kernel] pci 0000:00:01.0: supports D1
Mar 02 10:27:23 [kernel] pci 0000:00:07.0: [8086:1229] type 0 class 0x000200
Mar 02 10:27:23 [kernel] pci 0000:00:07.0: reg 10: [mem 0xdd9ff000-0xdd9fffff pref]
Mar 02 10:27:23 [kernel] pci 0000:00:07.0: reg 14: [io  0xec00-0xec1f]
Mar 02 10:27:23 [kernel] pci 0000:00:07.0: reg 18: [mem 0xdfd00000-0xdfdfffff]
Mar 02 10:27:23 [kernel] pci 0000:00:07.0: reg 30: [mem 0xdfc00000-0xdfcfffff pref]
Mar 02 10:27:23 [kernel] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
Mar 02 10:27:23 [kernel] pci 0000:00:10.0: reg 20: [io  0xe000-0xe01f]
Mar 02 10:27:23 [kernel] pci 0000:00:10.0: supports D1 D2
Mar 02 10:27:23 [kernel] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Mar 02 10:27:23 [kernel] pci 0000:00:10.0: PME# disabled
Mar 02 10:27:23 [kernel] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
Mar 02 10:27:23 [kernel] pci 0000:00:10.1: reg 20: [io  0xe400-0xe41f]
Mar 02 10:27:23 [kernel] pci 0000:00:10.1: supports D1 D2
Mar 02 10:27:23 [kernel] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
Mar 02 10:27:23 [kernel] pci 0000:00:10.1: PME# disabled
Mar 02 10:27:23 [kernel] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
Mar 02 10:27:23 [kernel] pci 0000:00:10.2: reg 20: [io  0xe800-0xe81f]
Mar 02 10:27:23 [kernel] pci 0000:00:10.2: supports D1 D2
Mar 02 10:27:23 [kernel] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
Mar 02 10:27:23 [kernel] pci 0000:00:10.2: PME# disabled
Mar 02 10:27:23 [kernel] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
Mar 02 10:27:23 [kernel] pci 0000:00:10.3: reg 10: [mem 0xdfffff00-0xdfffffff]
Mar 02 10:27:23 [kernel] pci 0000:00:10.3: supports D1 D2
Mar 02 10:27:23 [kernel] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
Mar 02 10:27:23 [kernel] pci 0000:00:10.3: PME# disabled
Mar 02 10:27:23 [kernel] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
Mar 02 10:27:23 [kernel] pci 0000:00:11.0: quirk: [io  0x0800-0x087f] claimed by vt8235 PM
Mar 02 10:27:23 [kernel] pci 0000:00:11.0: quirk: [io  0x0400-0x040f] claimed by vt8235 SMB
Mar 02 10:27:23 [kernel] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
Mar 02 10:27:23 [kernel] pci 0000:00:11.1: reg 20: [io  0xfc00-0xfc0f]
Mar 02 10:27:23 [kernel] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
Mar 02 10:27:23 [kernel] pci 0000:00:11.5: reg 10: [io  0xdc00-0xdcff]
Mar 02 10:27:23 [kernel] pci 0000:00:11.5: supports D1 D2
Mar 02 10:27:23 [kernel] pci 0000:01:00.0: [10de:0253] type 0 class 0x000300
Mar 02 10:27:23 [kernel] pci 0000:01:00.0: reg 10: [mem 0xde000000-0xdeffffff]
Mar 02 10:27:23 [kernel] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref]
Mar 02 10:27:23 [kernel] pci 0000:01:00.0: reg 18: [mem 0xdd880000-0xdd8fffff pref]
Mar 02 10:27:23 [kernel] pci 0000:01:00.0: reg 30: [mem 0xdfae0000-0xdfafffff pref]
Mar 02 10:27:23 [kernel] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Mar 02 10:27:23 [kernel] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
Mar 02 10:27:23 [kernel] pci 0000:00:01.0:   bridge window [mem 0xdda00000-0xdfafffff]
Mar 02 10:27:23 [kernel] pci 0000:00:01.0:   bridge window [mem 0xcd700000-0xdd8fffff pref]
Mar 02 10:27:23 [kernel] pci_bus 0000:00: on NUMA node 0
Mar 02 10:27:23 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 02 10:27:23 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 02 10:27:23 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 02 10:27:23 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Mar 02 10:27:23 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Mar 02 10:27:23 [kernel] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Mar 02 10:27:23 [kernel] vgaarb: loaded
Mar 02 10:27:23 [kernel] SCSI subsystem initialized
Mar 02 10:27:23 [kernel] libata version 3.00 loaded.
Mar 02 10:27:23 [kernel] usbcore: registered new interface driver usbfs
Mar 02 10:27:23 [kernel] usbcore: registered new interface driver hub
Mar 02 10:27:23 [kernel] usbcore: registered new device driver usb
Mar 02 10:27:23 [kernel] Advanced Linux Sound Architecture Driver Version 1.0.23.
Mar 02 10:27:23 [kernel] PCI: Using ACPI for IRQ routing
Mar 02 10:27:23 [kernel] PCI: pci_cache_line_size set to 32 bytes
Mar 02 10:27:23 [kernel] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
Mar 02 10:27:23 [kernel] reserve RAM buffer: 000000001fff0000 - 000000001fffffff 
Mar 02 10:27:23 [kernel] pnp: PnP ACPI init
Mar 02 10:27:23 [kernel] ACPI: bus type pnp registered
Mar 02 10:27:23 [kernel] pnp 00:00: [bus 00-ff]
Mar 02 10:27:23 [kernel] pnp 00:00: [io  0x0cf8-0x0cff]
Mar 02 10:27:23 [kernel] pnp 00:00: [io  0x0000-0x0cf7 window]
Mar 02 10:27:23 [kernel] pnp 00:00: [io  0x0d00-0xffff window]
Mar 02 10:27:23 [kernel] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Mar 02 10:27:23 [kernel] pnp 00:00: [mem 0x000c0000-0x000dffff window]
Mar 02 10:27:23 [kernel] pnp 00:00: [mem 0x20000000-0xffdfffff window]
Mar 02 10:27:23 [kernel] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
Mar 02 10:27:23 [kernel] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Mar 02 10:27:23 [kernel] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (disabled)
Mar 02 10:27:23 [kernel] pnp 00:02: [io  0x03f8-0x03ff]
Mar 02 10:27:23 [kernel] pnp 00:02: [irq 4]
Mar 02 10:27:23 [kernel] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
Mar 02 10:27:23 [kernel] pnp 00:03: [io  0x02f8-0x02ff]
Mar 02 10:27:23 [kernel] pnp 00:03: [irq 3]
Mar 02 10:27:23 [kernel] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
Mar 02 10:27:23 [kernel] pnp 00:04: [io  0x0378-0x037f]
Mar 02 10:27:23 [kernel] pnp 00:04: [io  0x0778-0x077b]
Mar 02 10:27:23 [kernel] pnp 00:04: [dma 3]
Mar 02 10:27:23 [kernel] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
Mar 02 10:27:23 [kernel] pnp 00:05: [dma 4]
Mar 02 10:27:23 [kernel] pnp 00:05: [io  0x0000-0x000f]
Mar 02 10:27:23 [kernel] pnp 00:05: [io  0x0081-0x0083]
Mar 02 10:27:23 [kernel] pnp 00:05: [io  0x0087]
Mar 02 10:27:23 [kernel] pnp 00:05: [io  0x0089-0x008b]
Mar 02 10:27:23 [kernel] pnp 00:05: [io  0x008f]
Mar 02 10:27:23 [kernel] pnp 00:05: [io  0x00c0-0x00df]
Mar 02 10:27:23 [kernel] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
Mar 02 10:27:23 [kernel] pnp 00:06: [io  0x0070-0x0071]
Mar 02 10:27:23 [kernel] pnp 00:06: [irq 8]
Mar 02 10:27:23 [kernel] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
Mar 02 10:27:23 [kernel] pnp 00:07: [io  0x0061]
Mar 02 10:27:23 [kernel] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
Mar 02 10:27:23 [kernel] pnp 00:08: [io  0x00f0-0x00ff]
Mar 02 10:27:23 [kernel] pnp 00:08: [irq 13]
Mar 02 10:27:23 [kernel] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
Mar 02 10:27:23 [kernel] pnp 00:09: [io  0x0060]
Mar 02 10:27:23 [kernel] pnp 00:09: [io  0x0064]
Mar 02 10:27:23 [kernel] pnp 00:09: [irq 1]
Mar 02 10:27:23 [kernel] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Mar 02 10:27:23 [kernel] pnp: PnP ACPI: found 10 devices
Mar 02 10:27:23 [kernel] ACPI: ACPI bus type pnp unregistered
Mar 02 10:27:23 [kernel] Switching to clocksource acpi_pm
Mar 02 10:27:23 [kernel] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Mar 02 10:27:23 [kernel] pci 0000:00:01.0:   bridge window [io  disabled]
Mar 02 10:27:23 [kernel] pci 0000:00:01.0:   bridge window [mem 0xdda00000-0xdfafffff]
Mar 02 10:27:23 [kernel] pci 0000:00:01.0:   bridge window [mem 0xcd700000-0xdd8fffff pref]
Mar 02 10:27:23 [kernel] pci 0000:00:01.0: setting latency timer to 64
Mar 02 10:27:23 [kernel] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
Mar 02 10:27:23 [kernel] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
Mar 02 10:27:23 [kernel] pci_bus 0000:01: resource 1 [mem 0xdda00000-0xdfafffff]
Mar 02 10:27:23 [kernel] pci_bus 0000:01: resource 2 [mem 0xcd700000-0xdd8fffff pref]
Mar 02 10:27:23 [kernel] NET: Registered protocol family 2
Mar 02 10:27:23 [kernel] Switched to NOHz mode on CPU #0
Mar 02 10:27:23 [kernel] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar 02 10:27:23 [kernel] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar 02 10:27:23 [kernel] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar 02 10:27:23 [kernel] TCP: Hash tables configured (established 16384 bind 16384)
Mar 02 10:27:23 [kernel] TCP reno registered
Mar 02 10:27:23 [kernel] UDP hash table entries: 256 (order: 0, 4096 bytes)
Mar 02 10:27:23 [kernel] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mar 02 10:27:23 [kernel] NET: Registered protocol family 1
Mar 02 10:27:23 [kernel] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Mar 02 10:27:23 [kernel] pci 0000:00:07.0: Firmware left e100 interrupts enabled; disabling
Mar 02 10:27:23 [kernel] pci 0000:01:00.0: Boot video device
Mar 02 10:27:23 [kernel] PCI: CLS 32 bytes, default 32
Mar 02 10:27:23 [kernel] msgmni has been set to 1003
Mar 02 10:27:23 [kernel] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 02 10:27:23 [kernel] io scheduler noop registered
Mar 02 10:27:23 [kernel] io scheduler deadline registered
Mar 02 10:27:23 [kernel] io scheduler cfq registered (default)
Mar 02 10:27:23 [kernel] vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 5120k, total 65536k
Mar 02 10:27:23 [kernel] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
Mar 02 10:27:23 [kernel] vesafb: protected mode interface info at c000:e9d0
Mar 02 10:27:23 [kernel] vesafb: pmi: set display start = c00cea15, set palette = c00cea9a
Mar 02 10:27:23 [kernel] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 
Mar 02 10:27:23 [kernel] vesafb: scrolling: redraw
Mar 02 10:27:23 [kernel] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Mar 02 10:27:23 [kernel] Console: switching to colour frame buffer device 160x64
Mar 02 10:27:23 [kernel] fb0: VESA VGA frame buffer device
Mar 02 10:27:23 [kernel] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Mar 02 10:27:23 [kernel] ACPI: Power Button [PWRB]
Mar 02 10:27:23 [kernel] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
Mar 02 10:27:23 [kernel] ACPI: Sleep Button [SLPB]
Mar 02 10:27:23 [kernel] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Mar 02 10:27:23 [kernel] ACPI: Power Button [PWRF]
Mar 02 10:27:23 [kernel] ACPI: acpi_idle registered with cpuidle
Mar 02 10:27:23 [kernel] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Mar 02 10:27:23 [kernel] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 02 10:27:23 [kernel] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 02 10:27:23 [kernel] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 02 10:27:23 [kernel] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 02 10:27:23 [kernel] Non-volatile memory driver v1.3
Mar 02 10:27:23 [kernel] Linux agpgart interface v0.103
Mar 02 10:27:23 [kernel] agpgart: Detected VIA KT266/KY266x/KT333 chipset
Mar 02 10:27:23 [kernel] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
Mar 02 10:27:23 [kernel] [drm] Initialized drm 1.1.0 20060810
Mar 02 10:27:23 [kernel] parport_pc 00:04: reported by Plug and Play ACPI
Mar 02 10:27:23 [kernel] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar 02 10:27:23 [kernel] loop: module loaded
Mar 02 10:27:23 [kernel] pata_via 0000:00:11.1: version 0.3.4
Mar 02 10:27:23 [kernel] pata_via 0000:00:11.1: can't derive routing for PCI INT A
Mar 02 10:27:23 [kernel] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Mar 02 10:27:23 [kernel] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Mar 02 10:27:23 [kernel] e100: Copyright(c) 1999-2006 Intel Corporation
Mar 02 10:27:23 [kernel] e100 0000:00:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Mar 02 10:27:23 [kernel] e100 0000:00:07.0: eth0: addr 0xdd9ff000, irq 18, MAC addr 00:a0:c9:41:e7:1d
Mar 02 10:27:23 [kernel] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 02 10:27:23 [kernel] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Mar 02 10:27:23 [kernel] ehci_hcd 0000:00:10.3: EHCI Host Controller
Mar 02 10:27:23 [kernel] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
Mar 02 10:27:23 [kernel] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdfffff00
Mar 02 10:27:23 [kernel] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
Mar 02 10:27:23 [kernel] hub 1-0:1.0: USB hub found
Mar 02 10:27:23 [kernel] hub 1-0:1.0: 6 ports detected
Mar 02 10:27:23 [kernel] uhci_hcd: USB Universal Host Controller Interface driver
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.0: UHCI Host Controller
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
Mar 02 10:27:23 [kernel] hub 2-0:1.0: USB hub found
Mar 02 10:27:23 [kernel] hub 2-0:1.0: 2 ports detected
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.1: UHCI Host Controller
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Mar 02 10:27:23 [kernel] ata1.00: ATA-7: Maxtor 6Y080P0, YAR41VW0, max UDMA/133
Mar 02 10:27:23 [kernel] ata1.00: 160086528 sectors, multi 16: LBA 
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
Mar 02 10:27:23 [kernel] hub 3-0:1.0: USB hub found
Mar 02 10:27:23 [kernel] hub 3-0:1.0: 2 ports detected
Mar 02 10:27:23 [kernel] ata1.00: configured for UDMA/133
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.2: UHCI Host Controller
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Mar 02 10:27:23 [kernel] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080P0   YAR4 PQ: 0 ANSI: 5
Mar 02 10:27:23 [kernel] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
Mar 02 10:27:23 [kernel] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
Mar 02 10:27:23 [kernel] sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar 02 10:27:23 [kernel] sd 0:0:0:0: [sda] Write Protect is off
Mar 02 10:27:23 [kernel] hub 4-0:1.0: USB hub found
Mar 02 10:27:23 [kernel] hub 4-0:1.0: 2 ports detected
Mar 02 10:27:23 [kernel] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Mar 02 10:27:23 [kernel] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 02 10:27:23 [kernel] Initializing USB Mass Storage driver...
Mar 02 10:27:23 [kernel] usbcore: registered new interface driver usb-storage
Mar 02 10:27:23 [kernel] USB Mass Storage support registered.
Mar 02 10:27:23 [kernel] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar 02 10:27:23 [kernel]  sda: sda1 sda2 sda3
Mar 02 10:27:23 [kernel] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Mar 02 10:27:23 [kernel] sd 0:0:0:0: [sda] Attached SCSI disk
Mar 02 10:27:23 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 02 10:27:23 [kernel] mousedev: PS/2 mouse device common for all mice
Mar 02 10:27:23 [kernel] rtc_cmos 00:06: RTC can wake from S4
Mar 02 10:27:23 [kernel] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Mar 02 10:27:23 [kernel] rtc0: alarms up to one year, y3k, 114 bytes nvram
Mar 02 10:27:23 [kernel] i2c /dev entries driver
Mar 02 10:27:23 [kernel] w83627hf: w83627hf: Found W83697HF chip at 0x290
Mar 02 10:27:23 [kernel] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB06, max UDMA/33
Mar 02 10:27:23 [kernel] cpuidle: using governor ladder
Mar 02 10:27:23 [kernel] cpuidle: using governor menu
Mar 02 10:27:23 [kernel] ata2.00: configured for UDMA/33
Mar 02 10:27:23 [kernel] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Mar 02 10:27:23 [kernel] usbcore: registered new interface driver usbhid
Mar 02 10:27:23 [kernel] usbhid: USB HID core driver
Mar 02 10:27:23 [kernel] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Mar 02 10:27:23 [kernel] usb 2-1: new low speed USB device using uhci_hcd and address 2
Mar 02 10:27:23 [kernel] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182M SB06 PQ: 0 ANSI: 5
Mar 02 10:27:23 [kernel] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
Mar 02 10:27:23 [kernel] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Mar 02 10:27:23 [kernel] cdrom: Uniform CD-ROM driver Revision: 3.20
Mar 02 10:27:23 [kernel] sr 1:0:0:0: Attached scsi CD-ROM sr0
Mar 02 10:27:23 [kernel] sr 1:0:0:0: Attached scsi generic sg1 type 5
Mar 02 10:27:23 [kernel] Refined TSC clocksource calibration: 1666.708 MHz.
Mar 02 10:27:23 [kernel] Switching to clocksource tsc
Mar 02 10:27:23 [kernel] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
Mar 02 10:27:23 [kernel] ALSA device list:
Mar 02 10:27:23 [kernel]   #0: VIA 8235 with ALC650D at 0xdc00, irq 22
Mar 02 10:27:23 [kernel] TCP cubic registered
Mar 02 10:27:23 [kernel] Using IPI Shortcut mode
Mar 02 10:27:23 [kernel] registered taskstats version 1
Mar 02 10:27:23 [kernel] rtc_cmos 00:06: setting system clock to 2011-03-02 09:27:09 UTC (1299058029)
Mar 02 10:27:23 [kernel] EXT3-fs: barriers not enabled
Mar 02 10:27:23 [kernel] EXT3-fs (sda2): mounted filesystem with journal data mode
Mar 02 10:27:23 [kernel] kjournald starting.  Commit interval 5 seconds
Mar 02 10:27:23 [kernel] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
Mar 02 10:27:23 [kernel] Freeing unused kernel memory: 340k freed
Mar 02 10:27:23 [kernel] udev[741]: starting version 164
Mar 02 10:27:23 [kernel] ACPI: resource vt596_smbus [io  0x0400-0x0407] conflicts with ACPI region SMOV [io 0x400-0x406]
Mar 02 10:27:23 [kernel] ACPI: This conflict may cause random problems and system instability
Mar 02 10:27:23 [kernel] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 02 10:27:23 [kernel] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Detected an NV20 generation card (0x025300a3)
Mar 02 10:27:23 [kernel] checking generic (d0000000 4000000) vs hw (d0000000 8000000)
Mar 02 10:27:23 [kernel] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Mar 02 10:27:23 [kernel] Console: switching to colour dummy device 80x25
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: ... appears to be valid
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: BMP BIOS found
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: BMP version 5.21
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Bios version 04.25.00.29
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.0
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02010110 000088b8
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02100202 00000000
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01000200 000088b8
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02100102 00000000
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 01120121 00000002
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 01120221 00000002
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Merging DCB entries 1 and 3
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Merging DCB entries 4 and 5
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC608
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCA09
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC6FD
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD029
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xC804
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: 0: memory 513MHz
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: c: memory 513MHz core 249MHz
Mar 02 10:27:23 [kernel] [TTM] Zone  kernel: Available graphics memory: 257056 kiB.
Mar 02 10:27:23 [kernel] [TTM] Initializing pool allocator.
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
Mar 02 10:27:23 [kernel] agpgart-via 0000:00:00.0: AGP 2.0 bridge
Mar 02 10:27:23 [kernel] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
Mar 02 10:27:23 [kernel] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
Mar 02 10:27:23 [kernel] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Mar 02 10:27:23 [kernel] [drm] No driver support for vblank timestamp query.
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x4a000, bo de90a600
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 10:27:23 [kernel] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B
Mar 02 10:27:23 [kernel] Console: switching to colour frame buffer device 160x64
Mar 02 10:27:23 [kernel] fb0: nouveaufb frame buffer device
Mar 02 10:27:23 [kernel] drm: registered panic notifier
Mar 02 10:27:23 [kernel] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
Mar 02 10:27:23 [kernel] EXT3-fs (sda2): using internal journal
Mar 02 10:27:23 [kernel] fuse init (API version 7.16)
Mar 02 10:27:23 [kernel] Adding 523260k swap on /dev/sda3.  Priority:-1 extents:1 across:523260k 
Mar 02 10:27:23 [kernel] e100 0000:00:07.0: eth0: NIC Link is Up 100 Mbps Full Duplex
Mar 02 10:28:58 [kernel] ata1.00: configured for UDMA/133
Mar 02 10:28:58 [kernel] ata1: EH complete
Mar 02 10:30:06 [kernel] usb 2-1: USB disconnect, address 2
Mar 02 10:30:07 [kernel] usb 2-1: new low speed USB device using uhci_hcd and address 3
Mar 02 10:30:08 [kernel] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input5
Mar 02 10:30:08 [kernel] generic-usb 0003:046D:C024.0002: input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1/input0
Mar 02 10:50:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 10:50:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 10:51:26 [kernel] i2c i2c-2: sendbytes: NAK bailout.
Mar 02 10:51:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 10:53:42 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 10:55:51 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 10:57:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 10:57:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:19:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:19:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:19:56 [kernel] i2c i2c-2: sendbytes: NAK bailout.
Mar 02 11:19:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:20:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:20:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:22:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:22:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:24:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:24:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:25:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:25:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:30:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:30:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:42:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:42:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:52:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:52:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:56:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:56:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:58:26 [kernel] i2c i2c-2: readbytes: ack/nak timeout
Mar 02 11:58:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:58:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:58:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:58:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 11:59:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 11:59:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 12:13:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 12:13:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 12:16:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 12:16:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 12:17:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 12:17:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 12:23:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 12:23:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 12:31:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 12:31:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 12:50:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 12:50:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 12:56:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 12:56:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 12:58:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 12:58:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 13:37:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 13:37:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 13:39:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 13:39:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 13:42:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 13:42:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:05:56 [kernel] i2c i2c-2: readbytes: ack/nak timeout
Mar 02 14:05:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:05:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:16:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:16:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:18:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:18:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:22:26 [kernel] i2c i2c-2: readbytes: ack/nak timeout
Mar 02 14:22:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:22:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:31:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:31:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:37:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:37:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:38:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:38:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:39:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:39:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:46:26 [kernel] i2c i2c-2: readbytes: ack/nak timeout
Mar 02 14:46:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:46:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:48:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:48:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:49:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:49:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:54:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:54:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:55:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:55:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 14:59:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 14:59:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 15:08:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 15:08:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 15:08:56 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 15:08:56 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 15:09:26 [kernel] i2c i2c-2: sendbytes: NAK bailout.
Mar 02 15:09:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 15:25:58 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 15:37:37 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 15:46:27 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 15:46:27 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 15:53:26 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 15:53:26 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 16:30:40 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 16:41:54 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 16:44:57 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 16:44:57 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 16:51:54 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 17:15:12 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 17:28:14 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 18:08:10 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 18:18:09 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 18:29:50 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 19:10:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 19:10:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 19:38:48 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 20:00:28 [kernel] i2c i2c-2: readbytes: ack/nak timeout
Mar 02 20:00:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 20:00:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 20:20:26 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 20:38:28 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Mar 02 21:25:25 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Mar 02 21:27:28 [kernel] i2c i2c-2: sendbytes: error -110
Mar 02 21:27:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 21:27:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 21:57:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 21:57:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:04:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:04:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:05:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:05:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:06:28 [kernel] i2c i2c-2: sendbytes: NAK bailout.
Mar 02 22:06:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:07:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:07:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:09:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:09:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:14:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:14:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:15:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:15:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:31:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:31:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:47:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:47:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:53:28 [kernel] i2c i2c-2: readbytes: ack/nak timeout
Mar 02 22:53:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:53:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:54:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:54:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:54:58 [kernel] i2c i2c-2: sendbytes: NAK bailout.
Mar 02 22:54:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 22:56:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 22:56:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:00:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:00:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:01:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:01:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:06:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:06:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:07:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:07:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:14:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:14:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:27:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:27:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:28:28 [kernel] i2c i2c-2: sendbytes: NAK bailout.
Mar 02 23:28:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:29:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:29:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:30:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:30:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 02 23:31:28 [kernel] i2c i2c-2: readbytes: ack/nak timeout
Mar 02 23:31:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 02 23:31:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 03 00:18:58 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 03 00:18:58 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 03 00:31:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 03 00:31:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B
Mar 03 00:33:28 [kernel] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
Mar 03 00:33:28 [kernel] [drm] nouveau 0000:01:00.0: Load detected on output B