Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-rc8_unstable_20110328+ (root@x-build64) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Mon Mar 28 19:54:05 CST 2011
Command line: ro root=UUID=421bc532-d4d1-45c7-acbf-fed2b392d854 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet drm.debug=0xe
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000073be0000 (usable)
 BIOS-e820: 0000000073be0000 - 0000000073be3000 (ACPI NVS)
 BIOS-e820: 0000000073be3000 - 0000000073bf0000 (ACPI data)
 BIOS-e820: 0000000073bf0000 - 0000000073c00000 (reserved)
 BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. H55M-S2H/H55M-S2H, BIOS F1 12/03/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x73be0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 078000000 mask FF8000000 uncachable
  2 base 074000000 mask FFC000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f5610] f5610
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-0000000073be0000
 0000000000 - 0073a00000 page 2M
 0073a00000 - 0073be0000 page 4k
kernel direct mapping tables up to 73be0000 @ 1fffc000-20000000
RAMDISK: 37b51000 - 37ff0000
ACPI: RSDP 00000000000f6fc0 00014 (v00 GBT   )
ACPI: RSDT 0000000073be3040 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0000000073be30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0000000073be3180 05411 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0000000073be0000 00040
ACPI: HPET 0000000073be8700 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0000000073be8780 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0000000073be87c0 00000 (v01 GBT             00000000      00000000)
ACPI: TAMG 0000000073be8c90 00A1A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 0000000073be8600 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0000000073be96b0 01CEC (v01  INTEL PPM RCM  80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000073be0000
Initmem setup node 0 0000000000000000-0000000073be0000
  NODE_DATA [0000000073bdb000 - 0000000073bdffff]
 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880071400000-ffff880072ffffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x00073be0
On node 0 totalpages: 473967
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3921 pages, LIFO batch:0
  DMA32 zone: 6426 pages used for memmap
  DMA32 zone: 463558 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 73c00000 (gap: 73c00000:80400000)
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880073800000 s74880 r8192 d23424 u262144
pcpu-alloc: s74880 r8192 d23424 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 467479
Policy zone: DMA32
Kernel command line: ro root=UUID=421bc532-d4d1-45c7-acbf-fed2b392d854 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet drm.debug=0xe
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1852876k/1896320k available (3752k kernel code, 452k absent, 42992k reserved, 3369k data, 588k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3199.948 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.89 BogoMIPS (lpj=3199948)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110112
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU         650  @ 3.20GHz stepping 02
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (25599.22 BogoMIPS).
Time:  7:05:34  Date: 03/30/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x2A, should be 0x29 (20110112/tbutils-314)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x73c00000-0xfebfffff]
pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0042] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xff00-0xff07]
pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: [8086:3b3b] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io  0xfe00-0xfe1f]
pci 0000:00:1a.1: [8086:3b3e] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io  0xfd00-0xfd1f]
pci 0000:00:1a.2: [8086:3b3f] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io  0xfc00-0xfc1f]
pci 0000:00:1a.7: [8086:3b3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:3b36] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0xfb00-0xfb1f]
pci 0000:00:1d.1: [8086:3b37] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0xfa00-0xfa1f]
pci 0000:00:1d.2: [8086:3b38] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0xf900-0xf91f]
pci 0000:00:1d.7: [8086:3b34] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0xf800-0xf807]
pci 0000:00:1f.2: reg 14: [io  0xf700-0xf703]
pci 0000:00:1f.2: reg 18: [io  0xf600-0xf607]
pci 0000:00:1f.2: reg 1c: [io  0xf500-0xf503]
pci 0000:00:1f.2: reg 20: [io  0xf400-0xf40f]
pci 0000:00:1f.2: reg 24: [io  0xf300-0xf30f]
pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io  0xf100-0xf107]
pci 0000:00:1f.5: reg 14: [io  0xf000-0xf003]
pci 0000:00:1f.5: reg 18: [io  0xef00-0xef07]
pci 0000:00:1f.5: reg 1c: [io  0xee00-0xee03]
pci 0000:00:1f.5: reg 20: [io  0xed00-0xed0f]
pci 0000:00:1f.5: reg 24: [io  0xec00-0xec0f]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [197b:2368] type 0 class 0x000101
pci 0000:02:00.0: reg 10: [io  0xdf00-0xdf07]
pci 0000:02:00.0: reg 14: [io  0xde00-0xde03]
pci 0000:02:00.0: reg 18: [io  0xdd00-0xdd07]
pci 0000:02:00.0: reg 1c: [io  0xdc00-0xdc03]
pci 0000:02:00.0: reg 20: [io  0xdb00-0xdb0f]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io  0xbe00-0xbeff]
pci 0000:03:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:04:02.0: [1106:3106] type 0 class 0x000200
pci 0000:04:02.0: reg 10: [io  0xce00-0xceff]
pci 0000:04:02.0: reg 14: [mem 0xfbcff000-0xfbcff0ff]
pci 0000:04:02.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:02.0: supports D1 D2
pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x73c00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 0000000073be0000 - 0000000073ffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io  0x0cf8-0x0cff]
Switched to NOHz mode on CPU #3
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x73c00000-0xfebfffff window]
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0290-0x029f]
pnp 00:01: [io  0x0800-0x087f]
pnp 00:01: [io  0x0290-0x0294]
pnp 00:01: [io  0x0880-0x088f]
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0080-0x0090]
pnp 00:02: [io  0x0094-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f0-0x03f5]
pnp 00:07: [io  0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x0400-0x04cf]
pnp 00:09: [io  0x04d2-0x04ff]
system 00:09: [io  0x0400-0x04cf] has been reserved
system 00:09: [io  0x04d2-0x04ff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xf4000000-0xf7ffffff]
system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000ccc00-0x000cffff]
pnp 00:0b: [mem 0x000f0000-0x000f7fff]
pnp 00:0b: [mem 0x000f8000-0x000fbfff]
pnp 00:0b: [mem 0x000fc000-0x000fffff]
pnp 00:0b: [mem 0x73be0000-0x73bfffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0x73bdffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
pnp 00:0b: [mem 0xfff00000-0xffffffff]
pnp 00:0b: [mem 0x000e0000-0x000effff]
system 00:0b: [mem 0x000ccc00-0x000cffff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0x73be0000-0x73bfffff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0x73bdffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0c: [mem 0xffb80000-0xffbfffff]
pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: BAR 8: assigned [mem 0x73c00000-0x73dfffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x73e00000-0x73ffffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0x74000000-0x741fffff 64bit pref]
pci 0000:00:1e.0: BAR 9: assigned [mem 0x74200000-0x742fffff pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x73c00000-0x73dfffff]
pci 0000:00:1c.0:   bridge window [mem 0x73e00000-0x73ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4:   bridge window [mem 0x74000000-0x741fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:04:02.0: BAR 6: assigned [mem 0x74200000-0x7420ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1e.0:   bridge window [mem 0x74200000-0x742fffff pref]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x73c00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x73c00000-0x73dfffff]
pci_bus 0000:01: resource 2 [mem 0x73e00000-0x73ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:02: resource 2 [mem 0x74000000-0x741fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:04: resource 2 [mem 0x74200000-0x742fffff pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0x73c00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4732k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1301468734.361:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Btrfs loaded
msgmni has been set to 3628
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
brd: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 3:489:67
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 3199.960 MHz.
Switching to clocksource tsc
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: ST3320418AS, CC38, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3320418AS      CC38 PQ: 0 ANSI: 5
Freeing unused kernel memory: 588k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 324k freed
Freeing unused kernel memory: 240k freed
dracut: dracut-005-3.fc13
dracut: rd_NO_LUKS: removing cryptoluks activation
udev: starting version 151
udevd (812): /proc/812/oom_adj is deprecated, please use /proc/812/oom_score_adj instead.
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm:intel_opregion_setup], graphic opregion physical addr: 0x73be0800
[drm:intel_opregion_setup], SWSCI supported
i915 0000:00:02.0: irq 40 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm:init_status_page], render ring hws offset: 0x00000000
[drm:init_status_page], bsd ring hws offset: 0x00022000
[drm:intel_parse_bios], Using VBT from OpRegion: $VBT IRONLAKE-DESK  d
[drm:parse_general_definitions], crt_ddc_bus_pin: 2
[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[drm:intel_dsm_pci_probe], no _DSM method for intel device
[drm:intel_modeset_init], 2 display pipes available.
[drm:intel_crt_init], pch crt adpa set to 0x80f40000
[drm:intel_sdvo_read_byte], i2c transfer returned -6
[drm:intel_sdvo_init], No SDVO device found on SDVOB
[drm:intel_dp_i2c_init], i2c_init DPDDC-B
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_i2c_init], i2c_init DPDDC-C
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_i2c_init], i2c_init DPDDC-D
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_panel_get_backlight], get backlight PWM = 0
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[drm:i915_get_vblank_timestamp], crtc 0 is disabled
[drm:intel_update_fbc], 
[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:i915_get_vblank_timestamp], crtc 1 is disabled
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:intel_update_fbc], 
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 42:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
[drm:drm_setup_crtcs], 
[drm:drm_enable_connectors], connector 5 enabled? yes
[drm:drm_enable_connectors], connector 8 enabled? no
[drm:drm_enable_connectors], connector 11 enabled? no
[drm:drm_enable_connectors], connector 15 enabled? no
[drm:drm_enable_connectors], connector 18 enabled? no
[drm:drm_enable_connectors], connector 20 enabled? no
[drm:drm_enable_connectors], connector 23 enabled? no
[drm:drm_target_preferred], looking for cmdline mode on connector 5
[drm:drm_target_preferred], looking for preferred mode on connector 5
[drm:drm_target_preferred], found mode 1680x1050
[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[drm:drm_setup_crtcs], desired mode 1680x1050 set on crtc 3
[drm:intelfb_create], allocated 1680x1050 fb: 0x00043000, bo ffff8800379cdc00
fbcon: inteldrmfb (fb0) is primary device
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_crtc_mode_set], Mode for pipe A:
[drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
[drm:intel_crtc_mode_set], disabling CxSR downclocking
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_pipe_set_base_atomic], Writing base 00043000 00000000 0 0 6720
[drm:intel_update_fbc], 
[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 89, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 199, fbc lines 4, cursor 10
[drm:drm_crtc_helper_set_mode], [ENCODER:6:DAC-6] set [MODE:30:1680x1050]
[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 89, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 199, fbc lines 4, cursor 10
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_fdi_link_train], FDI_RX_IIR 0x700
[drm:ironlake_fdi_link_train], FDI train 1 done.
[drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[drm:ironlake_fdi_link_train], FDI train 2 done.
[drm:ironlake_fdi_link_train], FDI train done
[drm:intel_update_fbc], 
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:VGA-1] set DPMS on
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
Console: switching to colour frame buffer device 210x65
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
dracut: Starting plymouth daemon
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
Floppy drive(s): fd0 is 1.44M
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_jmicron 0000:02:00.0: setting latency timer to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
FDC 0 is a post-1991 82077
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fc00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 2
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
 sda: sda1 sda2 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ ehci_hcd
usb usb7: SerialNumber: 0000:00:1a.7
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 2
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.7
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda1
usb 2-2: new low speed USB device using uhci_hcd and address 2
dracut: Loading SELinux policy
usb 2-2: New USB device found, idVendor=0557, idProduct=2220
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: ATEN  CS-1758/54
usb 2-2: Manufacturer: ATEN
input: ATEN ATEN  CS-1758/54 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input2
generic-usb 0003:0557:2220.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN ATEN  CS-1758/54] on usb-0000:00:1a.1-2/input0
input: ATEN ATEN  CS-1758/54 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/input/input3
generic-usb 0003:0557:2220.0002: input,hidraw1: USB HID v1.10 Mouse [ATEN ATEN  CS-1758/54] on usb-0000:00:1a.1-2/input1
dracut: /sbin/load_policy: Can't load policy: No such device
dracut: Switching root
readahead: starting
udev: starting version 151
sd 0:0:0:0: Attached scsi generic sg0 type 0
microcode: CPU0 sig=0x20652, pf=0x2, revision=0x9
input: PC Speaker as /devices/platform/pcspkr/input/input4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU1 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU2 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU3 sig=0x20652, pf=0x2, revision=0x9
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
via-rhine 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
eth0: VIA Rhine III at 0xfbcff000, 00:1e:58:9f:b0:17, IRQ 18.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
udev: renamed network interface eth0 to eth1
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9001599e000, 6c:f0:49:70:b1:73, XID 083000c0 IRQ 41
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA sound/pci/hda/patch_realtek.c:1527: SKU: Nid=0x1d sku_cfg=0x4005e601
ALSA sound/pci/hda/patch_realtek.c:1529: SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1530: SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:1531: SKU: check_sum=0x00000005
ALSA sound/pci/hda/patch_realtek.c:1532: SKU: customization=0x000000e6
ALSA sound/pci/hda/patch_realtek.c:1533: SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1534: SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1535: SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1536: SKU: override=0x1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
EXT3-fs (sda1): using internal journal
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): mounted filesystem with ordered data mode
Adding 2047996k swap on /dev/sda2.  Priority:-1 extents:1 across:2047996k 
NET: Registered protocol family 10
r8169 0000:03:00.0: eth0: unable to apply firmware patch
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 1 to 1
[drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 2 to 2
[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-2] status updated from 2 to 2
[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:output_poll_execute], [CONNECTOR:20:DP-2] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2
r8169 0000:03:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
eth0: no IPv6 routers present
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:i915_driver_open], 
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:i915_driver_open], 
[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
[drm:drm_mode_getconnector], [CONNECTOR:5:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
[drm:drm_mode_prune_invalid], Not using 1680x1050 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_prune_invalid], Not using 1280x960 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 45:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_prune_invalid], Not using 1152x864 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 42:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_prune_invalid], Not using 832x624 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[drm:drm_mode_debug_printmodeline], Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_prune_invalid], Not using 720x400 mode -3
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_getconnector], [CONNECTOR:5:?]
[drm:drm_mode_getconnector], [CONNECTOR:8:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:8:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:11:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:11:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:15:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:15:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:18:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:18:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:23:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:23:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:5:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_getconnector], [CONNECTOR:5:?]
[drm:drm_mode_getconnector], [CONNECTOR:8:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:8:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:11:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:11:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:15:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:15:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:18:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:18:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:23:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:23:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
[drm:drm_mode_addfb], [FB:27]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:5:VGA-1]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
[drm:intel_update_fbc], 
[drm:intel_crtc_mode_set], Mode for pipe A:
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:intel_crtc_mode_set], disabling CxSR downclocking
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_pipe_set_base_atomic], Writing base 00702000 00000000 0 0 8192
[drm:intel_update_fbc], 
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
[drm:drm_crtc_helper_set_mode], [ENCODER:6:DAC-6] set [MODE:28:1024x768]
[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[drm:ironlake_fdi_link_train], FDI train 1 done.
[drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[drm:ironlake_fdi_link_train], FDI train 2 done.
[drm:ironlake_fdi_link_train], FDI train done
[drm:intel_update_fbc], 
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:VGA-1] set DPMS on
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:drm_mode_addfb], [FB:29]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:5:VGA-1]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:29] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:intel_pipe_set_base_atomic], Writing base 01702000 00000000 0 0 4096
[drm:intel_update_fbc], 
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_mode_getconnector], [CONNECTOR:5:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40000, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_getconnector], [CONNECTOR:5:?]
[drm:drm_mode_getconnector], [CONNECTOR:8:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:8:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:11:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:11:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:15:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:15:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:18:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:18:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:23:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:23:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40000, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 1 to 1
[drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 2 to 2
[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-2] status updated from 2 to 2
[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:output_poll_execute], [CONNECTOR:20:DP-2] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2