Using PowerMac machine description Total memory = 1152MB; using 4096kB for hash table (at c7c00000) Linux version 2.6.38-gentoo-r1 (root@madpower) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #2 Fri Apr 8 00:56:59 MSD 2011 Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Mapped at 0xff7c0000 Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 Processor NAP mode on idle enabled. PowerMac motherboard: PowerBook G4 12" via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c bootconsole [udbg0] enabled Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 PCI host bridge /pci@f0000000 ranges: MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 PCI host bridge /pci@f2000000 (primary) ranges: MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 PCI host bridge /pci@f4000000 ranges: MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 nvram: Checking bank 0... nvram: gen0=920, gen1=921 nvram: Active bank is: 1 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 Top of RAM: 0x48000000, Total RAM: 0x48000000 Memory hole size: 0MB Zone PFN ranges: DMA 0x00000000 -> 0x00030000 Normal empty HighMem 0x00030000 -> 0x00048000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00048000 On node 0 totalpages: 294912 free_area_init_node: node 0, pgdat c06ca480, node_mem_map c0709000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 195072 pages, LIFO batch:31 HighMem zone: 768 pages used for memmap HighMem zone: 97536 pages, LIFO batch:31 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 292608 Kernel command line: root=/dev/sda6 ro PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) High memory: 393216k Memory: 1157936k/1179648k available (6788k kernel code, 21712k reserved, 204k data, 156k bss, 220k init) Kernel virtual memory layout: * 0xfffcf000..0xfffff000 : fixmap * 0xff800000..0xffc00000 : highmem PTEs * 0xfde72000..0xff800000 : early ioremap * 0xf1000000..0xfde72000 : vmalloc & ioremap SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:128 nr_irqs:128 16 mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 64, shift: 6, mask: 3f mpic: Initializing for 64 sources GMT Delta read from XPRAM: 0 minutes, DST: off time_init: decrementer frequency = 33.280414 MHz time_init: processor frequency = 533.333332 MHz clocksource: timebase mult[7830d91] shift[22] registered clockevent: decrementer mult[88510b1] shift[32] cpu[0] Console: colour dummy device 80x25 console [tty0] enabled, bootconsole disabled pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" MPC7450 family performance monitor hardware support registered NET: Registered protocol family 16 irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 channel 0 bus channel 1 bus irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 channel 0 bus PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c channel 1 bus channel 2 bus irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 PCI: Probing PCI hardware pci 0000:00:0b.0: [106b:0034] type 0 class 0x000600 pci 0000:00:10.0: [10de:0179] type 0 class 0x000300 pci 0000:00:10.0: reg 10: [mem 0x91000000-0x91ffffff] pci 0000:00:10.0: reg 14: [mem 0x94000000-0x97ffffff pref] pci 0000:00:10.0: reg 18: [mem 0x00000000-0x0007ffff pref] pci 0000:00:10.0: reg 30: [mem 0x90000000-0x9001ffff pref] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 pci 0001:10:0b.0: [106b:0035] type 0 class 0x000600 pci 0001:10:12.0: [14e4:4320] type 0 class 0x000280 pci 0001:10:12.0: reg 10: [mem 0x80084000-0x80085fff] pci 0001:10:12.0: supports D1 D2 pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0001:10:12.0: PME# disabled pci 0001:10:17.0: [106b:003e] type 0 class 0x00ff00 pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff] pci 0001:10:18.0: [106b:003f] type 0 class 0x000c03 pci 0001:10:18.0: reg 10: [mem 0x80082000-0x80082fff] pci 0001:10:19.0: [106b:003f] type 0 class 0x000c03 pci 0001:10:19.0: reg 10: [mem 0x80081000-0x80081fff] pci 0001:10:1a.0: [106b:003f] type 0 class 0x000c03 pci 0001:10:1a.0: reg 10: [mem 0x80080000-0x80080fff] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52 irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 pci 0002:20:0b.0: [106b:0036] type 0 class 0x000600 pci 0002:20:0d.0: [106b:003b] type 0 class 0x00ff00 pci 0002:20:0d.0: reg 10: [mem 0xf5004000-0xf5007fff] pci 0002:20:0e.0: [106b:0031] type 0 class 0x000c00 pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff] pci 0002:20:0e.0: supports D1 D2 pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot pci 0002:20:0e.0: PME# disabled pci 0002:20:0f.0: [106b:0032] type 0 class 0x000200 pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 pci 0000:00:10.0: BAR 2: assigned [mem 0xf1000000-0xf107ffff pref] pci 0000:00:10.0: BAR 2: set to [mem 0xf1000000-0xf107ffff pref] (PCI address [0xf1000000-0xf107ffff]) pci_bus 0000:00: resource 0 [io 0x802000-0x1001fff] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff] pci_bus 0000:00: resource 2 [mem 0x90000000-0x9fffffff] pci_bus 0001:10: resource 0 [io 0x0000-0x7fffff] pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff] pci_bus 0001:10: resource 2 [mem 0x80000000-0x8fffffff] pci_bus 0002:20: resource 0 [io 0xff7fe000-0xffffdfff] pci_bus 0002:20: resource 1 [mem 0xf5000000-0xf5ffffff] bio: create slab at 0 vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource timebase NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS mismatch (32 != 1020), using 32 bytes Thermal assist unit not available Registering PowerMac CPU frequency driver Low: 533 Mhz, High: 867 Mhz, Boot: 533 Mhz highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher SGI XFS with ACLs, security attributes, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 1493 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Generic RTC Driver v1.07 Generic non-volatile memory driver v1.1 Linux agpgart interface v0.103 agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [drm] Initialized drm 1.1.0 20060810 [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x017900a5) [drm] nouveau 0000:00:10.0: OF bios successfully copied (5017 bytes) [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:00:10.0: ... BIOS signature not found [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM [drm] nouveau 0000:00:10.0: ... BIOS signature not found [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from ACPI [drm] nouveau 0000:00:10.0: ... BIOS signature not found [drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN [drm] nouveau 0000:00:10.0: BMP BIOS found [drm] nouveau 0000:00:10.0: BMP version 5.21 [drm] nouveau 0000:00:10.0: Bios version 04.17.00.55 [drm] nouveau 0000:00:10.0: Found Display Configuration Block version 2.0 [drm] nouveau 0000:00:10.0: Raw DCB entry 0: 04000223 00000004 [drm] nouveau 0000:00:10.0: Raw DCB entry 1: 02010100 11b04fb0 [drm] nouveau 0000:00:10.0: Raw DCB entry 2: 02010101 11b00703 [drm] nouveau 0000:00:10.0: Loading NV17 power sequencing microcode [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x060F [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x0737 [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x0CC6 [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x0E4D [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x0EA6 [drm] nouveau 0000:00:10.0: BIOS FP mode: 1280x1024 (108000kHz pixel clock) [drm] nouveau 0000:00:10.0: 1 available performance level(s) [drm] nouveau 0000:00:10.0: 0: memory 400MHz [drm] nouveau 0000:00:10.0: c: memory 405MHz core 23MHz [TTM] Zone kernel: Available graphics memory: 382360 kiB. [TTM] Zone highmem: Available graphics memory: 578968 kiB. [TTM] Initializing pool allocator. [drm] nouveau 0000:00:10.0: Detected 32MiB VRAM [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0) [drm] nouveau 0000:00:10.0: Calling LVDS script 1: [drm] nouveau 0000:00:10.0: Calling LVDS script 6: [drm] nouveau 0000:00:10.0: 0x1306: Parsing digital output script table [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2) [drm] nouveau 0000:00:10.0: Load detected on output B [drm] nouveau 0000:00:10.0: allocated 1024x768 fb: 0x49000, bo efbb6c00 [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on TV encoder (output 2) [drm] nouveau 0000:00:10.0: Output TV-1 is running on CRTC 0 using output B [drm] nouveau 0000:00:10.0: Calling LVDS script 2: [drm] nouveau 0000:00:10.0: 0x1072: Parsing digital output script table [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on lvds encoder (output 0) [drm] nouveau 0000:00:10.0: Calling LVDS script 5: [drm] nouveau 0000:00:10.0: 0x1109: Parsing digital output script table [drm] nouveau 0000:00:10.0: Output LVDS-1 is running on CRTC 1 using output C Console: switching to colour frame buffer device 90x36 [drm] nouveau 0000:00:10.0: GPU lockup - switching to software fbcon fb0: nouveaufb frame buffer device drm: registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:10.0 on minor 0 brd: module loaded loop: module loaded MacIO PCI driver attached to Intrepid chipset irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 apm_emu: PMU APM Emulation initialized. adb: starting probe task... pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002) pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 scsi0 : pata_macio ata1: PATA max UDMA/100 irq 39 ata1.00: ATA-6: FUJITSU MHS2040AT D, 8105, max UDMA/100 ata1.00: 78140160 sectors, multi 16: LBA48 adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f ADB keyboard at 2, handler 1 Detected ADB keyboard, type ANSI. input: ADB keyboard as /devices/virtual/input/input0 input: ADB Powerbook buttons as /devices/virtual/input/input1 ata1.00: configured for UDMA/100 ADB mouse at 3, handler set to 4 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHS2040A 8105 PQ: 0 ANSI: 5 (trackpad) sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA input: ADB mouse as /devices/virtual/input/input2 adb: finished probe task... sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sd 0:0:0:0: [sda] Attached SCSI disk pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 scsi1 : pata_macio ata2: PATA max MWDMA2 irq 24 sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) sungem_phy: PHY ID: 4061e4, addr: 0 gem 0002:20:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:eb:a4:f2 gem 0002:20:0f.0: eth0: Found BCM5221 PHY usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002) ohci_hcd 0001:10:18.0: OHCI Host Controller ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1 ohci_hcd 0001:10:18.0: irq 27, io mem 0x80082000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002) ohci_hcd 0001:10:19.0: OHCI Host Controller ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:10:19.0: irq 28, io mem 0x80081000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ata2.00: ATAPI: MATSHITADVD-R UJ-815, D0CB, max UDMA/66 ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002) ohci_hcd 0001:10:1a.0: OHCI Host Controller ata2.00: configured for MWDMA2 ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 3 ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80080000 scsi 1:0:0:0: CD-ROM MATSHITA DVD-R UJ-815 D0CB PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver libusual mousedev: PS/2 mouse device common for all mice usb 1-2: new full speed USB device using ohci_hcd and address 2 usbcore: registered new interface driver appletouch i2c /dev entries driver PowerMac i2c bus pmu 2 registered PowerMac i2c bus pmu 1 registered PowerMac i2c bus mac-io 0 registered PowerMac i2c bus uni-n 1 registered PowerMac i2c bus uni-n 0 registered usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type input: PMU as /devices/virtual/input/input3 Registered led device: pmu-led::front EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Freeing unused kernel memory: 220k init usb 2-1: new low speed USB device using ohci_hcd and address 2 input: 2.4GHz 2way RF Receiver as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1:1.0/input/input4 generic-usb 0003:1BCF:053A.0001: input,hiddev0: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0001:10:19.0-1/input0 gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex udev: starting version 151 udevd (1237): /proc/1237/oom_adj is deprecated, please use /proc/1237/oom_score_adj instead. b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243) ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243) ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243) ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 pmac_zilog: 0.6 (Benjamin Herrenschmidt ) ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port cfg80211: Calling CRDA to update world regulatory domain Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb b43-phy0: Broadcom 4306 WLAN found (core revision 5) ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] EXT3-fs (sda6): using internal journal Bluetooth: L2CAP ver 2.15 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [drm] nouveau 0000:00:10.0: Load detected on output B [drm] nouveau 0000:00:10.0: Load detected on output B input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5 [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2) [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on TV encoder (output 2) [drm] nouveau 0000:00:10.0: Output TV-1 is running on CRTC 0 using output B b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex gem 0002:20:0f.0: eth0: Pause is disabled ata1.00: configured for UDMA/100 ata1: EH complete wlan0: authenticate with 00:22:15:32:6f:f3 (try 1) wlan0: authenticated wlan0: associate with 00:22:15:32:6f:f3 (try 1) wlan0: RX AssocResp from 00:22:15:32:6f:f3 (capab=0x401 status=0 aid=2) wlan0: associated [drm] nouveau 0000:00:10.0: Load detected on output B [drm] nouveau 0000:00:10.0: Load detected on output B [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0) [drm] nouveau 0000:00:10.0: Calling LVDS script 6: [drm] nouveau 0000:00:10.0: 0x116F: Parsing digital output script table [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2) [drm] nouveau 0000:00:10.0: Load detected on output B [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on lvds encoder (output 0) [drm] nouveau 0000:00:10.0: Calling LVDS script 2: [drm] nouveau 0000:00:10.0: 0x1072: Parsing digital output script table [drm] nouveau 0000:00:10.0: Calling LVDS script 5: [drm] nouveau 0000:00:10.0: 0x1109: Parsing digital output script table [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on TV encoder (output 2) PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0) [drm] nouveau 0000:00:10.0: Calling LVDS script 6: [drm] nouveau 0000:00:10.0: 0x116F: Parsing digital output script table [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2)