Initializing cgroup subsys cpuset Linux version 2.6.38-ck (root@weird) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #6 SMP PREEMPT Thu Apr 21 15:27:00 CEST 2011 Command line: dolvm resume=swap:/dev/mapper/swap root=/dev/ram0 crypt_root=/dev/mapper/weird-root real_root=/dev/mapper/root crypt_swap=/dev/weird/swap swap_key=/etc/key swap_keydev=/dev/mapper/root BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001b0000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Gigabyte Technology Co., Ltd. GA-MA780G-UD3H/GA-MA780G-UD3H, BIOS F1 12/30/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x1b0000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00BFF00000 mask FFFFF00000 uncachable 3 base 0100000000 mask FF80000000 write-back 4 base 0180000000 mask FFE0000000 write-back 5 base 01A0000000 mask FFF0000000 write-back 6 disabled 7 disabled TOM2: 00000001b0000000 aka 6912M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbfee0 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000f5880] f5880 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bfee0000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bfee0000 page 4k kernel direct mapping tables up to bfee0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-00000001b0000000 0100000000 - 01b0000000 page 2M kernel direct mapping tables up to 1b0000000 @ bfed8000-bfee0000 RAMDISK: 37c83000 - 37ff0000 ACPI: RSDP 00000000000f7200 00014 (v00 GBT ) ACPI: RSDT 00000000bfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000bfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000bfee30c0 06467 (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000bfee0000 00040 ACPI: SSDT 00000000bfee9600 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000bfee98c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000bfee9900 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC 00000000bfee9540 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff8800ae400000-ffff8800b35fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001b0000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bfee0 0: 0x00100000 -> 0x001b0000 On node 0 totalpages: 1506927 DMA zone: 56 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3921 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767768 pages, LIFO batch:31 Normal zone: 9856 pages used for memmap Normal zone: 711040 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000 PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000 PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000 PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff8800bfc00000 s71360 r8192 d22848 u524288 pcpu-alloc: s71360 r8192 d22848 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1482729 Kernel command line: dolvm resume=swap:/dev/mapper/swap root=/dev/ram0 crypt_root=/dev/mapper/weird-root real_root=/dev/mapper/root crypt_swap=/dev/weird/swap swap_key=/etc/key swap_keydev=/dev/mapper/root PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ b4000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ b4000000 PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 Memory: 5789160k/7077888k available (3337k kernel code, 1050180k absent, 238548k reserved, 2047k data, 444k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Preemptable hierarchical RCU implementation. CONFIG_RCU_FANOUT set to non-default value of 32 RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:512 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2505.334 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 5010.66 BogoMIPS (lpj=2505334) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys devices Initializing cgroup subsys freezer tseg: 00bff00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine ACPI: Core revision 20110112 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (10021.14 BogoMIPS). NET: Registered protocol family 16 node 0 link 0: io port [c000, ffff] TOM: 00000000d0000000 aka 3328M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e03fffff] TOM2: 00000001b0000000 aka 6912M bus: [00, 03] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x000a0000-0x000bffff] bus: 00 index 2 [mem 0xd0000000-0xefffffff] bus: 00 index 3 [mem 0xf0000000-0xffffffff] bus: 00 index 4 [mem 0x1b0000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 pci 0000:01:05.0: [1002:9610] type 0 class 0x000300 pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff] pci 0000:01:05.0: reg 18: [mem 0xfdfe0000-0xfdfeffff] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.1: [1002:960f] type 0 class 0x000403 pci 0000:01:05.1: reg 10: [mem 0xfdffc000-0xfdffffff] pci 0000:01:05.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] pci 0000:02:00.0: reg 18: [mem 0xfdaff000-0xfdafffff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0xfdae0000-0xfdaeffff 64bit pref] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:0a.0: PCI bridge to [bus 02-02] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] pci 0000:03:06.0: [9004:6178] type 0 class 0x000100 pci 0000:03:06.0: reg 10: [io 0xcc00-0xccff] pci 0000:03:06.0: reg 14: [mem 0xfdcff000-0xfdcfffff] pci 0000:03:06.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:03:07.0: [1244:0e00] type 0 class 0x000280 pci 0000:03:07.0: reg 10: [mem 0xfdcfe000-0xfdcfe01f] pci 0000:03:07.0: reg 14: [io 0xcf00-0xcf1f] pci 0000:03:07.0: supports D2 pci 0000:03:07.0: PME# supported from D2 D3hot D3cold pci 0000:03:07.0: PME# disabled pci 0000:03:0e.0: [104c:8024] type 0 class 0x000c00 pci 0000:03:0e.0: reg 10: [mem 0xfdcfd000-0xfdcfd7ff] pci 0000:03:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff] pci 0000:03:0e.0: supports D1 D2 pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:0e.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff Switching to clocksource hpet Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000dffff window] pnp 00:00: [mem 0xd0000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [io 0x0010-0x001f] pnp 00:01: [io 0x0022-0x003f] pnp 00:01: [io 0x0044-0x005f] pnp 00:01: [io 0x0062-0x0063] pnp 00:01: [io 0x0065-0x006f] pnp 00:01: [io 0x0074-0x007f] pnp 00:01: [io 0x0091-0x0093] pnp 00:01: [io 0x00a2-0x00bf] pnp 00:01: [io 0x00e0-0x00ef] pnp 00:01: [io 0x04d0-0x04d1] pnp 00:01: [io 0x0220-0x0225] pnp 00:01: [io 0x0290-0x0294] system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0220-0x0225] has been reserved system 00:01: [io 0x0290-0x0294] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x4100-0x411f] pnp 00:02: [io 0x0228-0x022f] pnp 00:02: [io 0x0238-0x023f] pnp 00:02: [io 0x040b] pnp 00:02: [io 0x04d6] pnp 00:02: [io 0x0c00-0x0c01] pnp 00:02: [io 0x0c14] pnp 00:02: [io 0x0c50-0x0c52] pnp 00:02: [io 0x0c6c-0x0c6d] pnp 00:02: [io 0x0c6f] pnp 00:02: [io 0x0cd0-0x0cd1] pnp 00:02: [io 0x0cd2-0x0cd3] pnp 00:02: [io 0x0cd4-0x0cdf] pnp 00:02: [io 0x4000-0x40fe] pnp 00:02: [io 0x4210-0x4217] pnp 00:02: [io 0x0b00-0x0b0f] pnp 00:02: [io 0x0b10-0x0b1f] pnp 00:02: [io 0x0b20-0x0b3f] pnp 00:02: [mem 0x00000000-0x00000fff window] pnp 00:02: [mem 0xfee00400-0xfee00fff window] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:06.0 BAR 6 [mem 0x00000000-0x0000ffff pref] system 00:02: [io 0x4100-0x411f] has been reserved system 00:02: [io 0x0228-0x022f] has been reserved system 00:02: [io 0x0238-0x023f] has been reserved system 00:02: [io 0x040b] has been reserved system 00:02: [io 0x04d6] has been reserved system 00:02: [io 0x0c00-0x0c01] has been reserved system 00:02: [io 0x0c14] has been reserved system 00:02: [io 0x0c50-0x0c52] has been reserved system 00:02: [io 0x0c6c-0x0c6d] has been reserved system 00:02: [io 0x0c6f] has been reserved system 00:02: [io 0x0cd0-0x0cd1] has been reserved system 00:02: [io 0x0cd2-0x0cd3] has been reserved system 00:02: [io 0x0cd4-0x0cdf] has been reserved system 00:02: [io 0x4000-0x40fe] has been reserved system 00:02: [io 0x4210-0x4217] has been reserved system 00:02: [io 0x0b00-0x0b0f] has been reserved system 00:02: [io 0x0b10-0x0b1f] has been reserved system 00:02: [io 0x0b20-0x0b3f] has been reserved system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [dma 4] pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0080-0x0090] pnp 00:03: [io 0x0094-0x009f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [irq 0 disabled] pnp 00:04: [irq 8] pnp 00:04: [mem 0xfed00000-0xfed003ff] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:05: [io 0x0070-0x0073] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0061] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:07: [io 0x00f0-0x00ff] pnp 00:07: [irq 13] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:08: [io 0x03f8-0x03ff] pnp 00:08: [irq 4] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:09: [io 0x0378-0x037f] pnp 00:09: [io 0x0778-0x077b] pnp 00:09: [irq 7] pnp 00:09: [dma 3] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [irq 1] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:0b: [mem 0xe0000000-0xefffffff] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000d0800-0x000d3fff] pnp 00:0c: [mem 0x000f0000-0x000f7fff] pnp 00:0c: [mem 0x000f8000-0x000fbfff] pnp 00:0c: [mem 0x000fc000-0x000fffff] pnp 00:0c: [mem 0xbfee0000-0xbfefffff] pnp 00:0c: [mem 0xffff0000-0xffffffff] pnp 00:0c: [mem 0x00000000-0x0009ffff] pnp 00:0c: [mem 0x00100000-0xbfedffff] pnp 00:0c: [mem 0xbfff0000-0xcffeffff] pnp 00:0c: [mem 0xfec00000-0xfec00fff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] pnp 00:0c: [mem 0xfff80000-0xfffeffff] pnp 00:0c: disabling [mem 0x000d0800-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x00100000-0xbfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] system 00:0c: [mem 0xbfee0000-0xbfefffff] could not be reserved system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved system 00:0c: [mem 0xbfff0000-0xcffeffff] could not be reserved system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: BAR 6: assigned [mem 0xfda00000-0xfda0ffff pref] pci 0000:00:0a.0: PCI bridge to [bus 02-02] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] pci 0000:03:06.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref] pci 0000:00:14.4: PCI bridge to [bus 03-03] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] pci_bus 0000:02: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff pref] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled pci 0000:01:05.0: Boot video device PCI: CLS 4 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3508k freed PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ b4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1303395167.441:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 11442 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:0a.0: setting latency timer to 64 pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mousedev: PS/2 mouse device common for all mice device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu IPv4 over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Registering the dns_resolver key type powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0xe powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xf powernow-k8: 2 : fid 0xe (2200 MHz), vid 0x11 powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x13 powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x15 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x16 PM: Checking hibernation image partition swap:/dev/mapper/swap input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 ata5.00: HPA detected: current 321670847, native 321672960 ata5.00: ATA-7: HDT722516DLAT80, V43OA70A, max UDMA/133 ata5.00: 321670847 sectors, multi 16: LBA48 ata5.01: ATA-7: HDT722516DLAT80, V43OA70A, max UDMA/133 ata5.01: 321672960 sectors, multi 16: LBA48 ata5.00: configured for UDMA/100 ata5.01: configured for UDMA/100 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 ata1.00: HPA detected: current 2930275055, native 2930277168 ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7 ata1.00: 2930275055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7 ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5 ata4.00: configured for UDMA/133 ata3.00: ATA-8: ExcelStor Technology J9250S, GM2OA52A, max UDMA/133 ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ExcelStor Techno GM2O PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5 scsi 4:0:0:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0 ANSI: 5 scsi 4:0:1:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0 ANSI: 5 PM: Hibernation image not present or could not be loaded. registered taskstats version 1 Freeing unused kernel memory: 444k freed BFS CPU scheduler v0.363 by Con Kolivas. sd 0:0:0:0: [sda] 2930275055 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdd] 321670847 512-byte logical blocks: (164 GB/153 GiB) sd 4:0:0:0: [sdd] Write Protect is off sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:1:0: [sde] 321672960 512-byte logical blocks: (164 GB/153 GiB) sd 4:0:1:0: [sde] Write Protect is off sd 4:0:1:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: unknown partition table sde: unknown partition table sd 4:0:0:0: [sdd] Attached SCSI disk sd 4:0:1:0: [sde] Attached SCSI disk sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 > sd 2:0:0:0: [sdb] Attached SCSI disk sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 > sdc: sdc1 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 > sd 0:0:0:0: [sda] Attached SCSI disk sd 3:0:0:0: [sdc] Attached SCSI disk scsi 1:0:0:0: Attached scsi generic sg0 type 5 sd 0:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 4:0:0:0: Attached scsi generic sg4 type 0 sd 4:0:1:0: Attached scsi generic sg5 type 0 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 aic7xxx 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 scsi6 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 3 usbcore: registered new interface driver usbhid usbhid: USB HID core driver scsi7 : usb-storage 1-5:1.0 usb 3-3: new low speed USB device using ohci_hcd and address 2 input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input3 generic-usb 0003:046D:C018.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 xor: automatically using best checksumming function: generic_sse generic_sse: 7220.000 MB/sec xor: using function: generic_sse (7220.000 MB/sec) raid6: int64x1 2167 MB/s raid6: int64x2 2476 MB/s raid6: int64x4 1898 MB/s raid6: int64x8 1421 MB/s raid6: sse2x1 3511 MB/s raid6: sse2x2 4562 MB/s raid6: sse2x4 4796 MB/s raid6: using algorithm sse2x4 (4796 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 btrfs: Unknown symbol crc32c (err 0) RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. fuse init (API version 7.16) scsi 7:0:0:0: Direct-Access SanDisk Cruzer Mini 0.1 PQ: 0 ANSI: 2 sd 7:0:0:0: Attached scsi generic sg6 type 0 sd 7:0:0:0: [sdf] 501759 512-byte logical blocks: (256 MB/244 MiB) sd 7:0:0:0: [sdf] Write Protect is off sd 7:0:0:0: [sdf] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdf] No Caching mode page present sd 7:0:0:0: [sdf] Assuming drive cache: write through sd 7:0:0:0: [sdf] No Caching mode page present sd 7:0:0:0: [sdf] Assuming drive cache: write through sdf: sdf1 sd 7:0:0:0: [sdf] No Caching mode page present sd 7:0:0:0: [sdf] Assuming drive cache: write through sd 7:0:0:0: [sdf] Attached SCSI removable disk EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-33): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-33): mounted filesystem with writeback data mode <30>udev[5610]: starting version 167 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 41 for MSI/MSI-X r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90011a50000, 00:1f:d0:d6:f6:cf, XID 1c4000c0 IRQ 41 input: PC Speaker as /devices/platform/pcspkr/input/input4 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 Real Time Clock Driver v1.12b Modular ISDN core version 1.1.21 NET: Registered protocol family 34 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [drm] Initialized drm 1.1.0 20060810 mISDNipac module version 2.0 ppdev: user-space parallel port driver firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 AVM Fritz PCI driver Rev. 2.1 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] initializing kernel modesetting (RS780 0x1002:0x9610). [drm] register mmio base: 0xFDFE0000 [drm] register mmio size: 65536 ATOM BIOS: B27722 radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 2929532 kiB. [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [TTM] Initializing pool allocator. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RS780 Microcode firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 fcpci 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 mISDN: found adapter Fritz!Card PCI v2 at 0000:03:07.0 AVM.1: AVM Fritz!CARD PCIv2 config irq:21 base:0xCF00 AVM 1 cards installed DEBUG Error: Driver 'pcspkr' is already registered, aborting... radeon 0000:01:05.0: WB enabled HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support failed to evaluate ATIF got AE_BAD_PARAMETER [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] DVI-D [drm] HPD1 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP1: INTERNAL_KLDSCP_LVTMA fcpci: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint fcpci: AVM FRITZ!Card PCI driver, revision 0.7.2 fcpci: (fcpci built on Apr 21 2011 at 15:35:31) fcpci: -- 64 bit CAPI driver -- Error: Driver 'fcpci' is already registered, aborting... [drm] radeon: power management initialized [drm] fb mappable at 0xD0141000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 Console: switching to colour frame buffer device 240x67 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0 HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:05.1: setting latency timer to 64 firewire_core: created device fw0: GUID 00ea91e500001fd0, S400 ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/none/1.1.2.2 loaded tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky EXT3-fs (dm-33): using internal journal EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-35): using internal journal EXT3-fs (dm-35): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-36): using internal journal EXT3-fs (dm-36): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-37): using internal journal EXT3-fs (dm-37): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-39): using internal journal EXT3-fs (dm-39): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-40): using internal journal EXT3-fs (dm-40): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-41): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (dm-41): using internal journal EXT3-fs (dm-41): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-42): using internal journal EXT3-fs (dm-42): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-43): using internal journal EXT3-fs (dm-43): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-44): using internal journal EXT3-fs (dm-44): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-38): using internal journal EXT3-fs (dm-38): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-21): using internal journal EXT3-fs (dm-21): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-45): using internal journal EXT3-fs (dm-45): mounted filesystem with writeback data mode REISERFS (device dm-19): found reiserfs format "3.6" with standard journal REISERFS (device dm-19): using ordered data mode REISERFS (device dm-19): journal params: device dm-19, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-19): checking transaction log (dm-19) REISERFS (device dm-19): Using r5 hash to sort names REISERFS (device dm-28): found reiserfs format "3.6" with standard journal REISERFS (device dm-28): using ordered data mode REISERFS (device dm-28): journal params: device dm-28, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-28): checking transaction log (dm-28) REISERFS (device dm-28): Using r5 hash to sort names EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-57): using internal journal EXT3-fs (dm-57): mounted filesystem with writeback data mode Adding 4193272k swap on /dev/mapper/swap. Priority:-1 extents:1 across:4193272k r8169 0000:02:00.0: eth0: link down r8169 0000:02:00.0: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready r8169 0000:02:00.0: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth0: no IPv6 routers present it87: Found IT8718F chip at 0x228, revision 5 it87: Beeping is supported /dev/vmmon[8497]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[8497]: Initial HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0 /dev/vmmon[8497]: HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0 /dev/vmmon[8497]: Module vmmon: initialized /dev/vmci[8497]: VMCI: Driver initialized. /dev/vmci[8497]: Module vmci: registered with major=10 minor=58 /dev/vmci[8497]: Module vmci: initialized /dev/vmnet: open called by PID 8504 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: up bridge-eth0: attached /dev/vmnet: open called by PID 8511 (vmnet-dhcpd) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 8513 (vmnet-netifup) /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 8516 (vmnet-dhcpd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 8520 (vmnet-natd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 8521 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened fcpci 0000:03:07.0: PCI INT A disabled mISDNipac module unloaded NET: Unregistered protocol family 34 mISDNcore unloaded fcpci: AVM FRITZ!Card PCI driver, revision 0.7.2 fcpci: (fcpci built on Apr 21 2011 at 15:35:31) fcpci: -- 64 bit CAPI driver -- fcpci 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 fcpci: AVM FRITZ!Card PCI found: port 0xcf00, irq 21 fcpci: Loading... fcpci: Driver 'fcpci' attached to fcpci-stack. (304) fcpci: Stack version 3.11-07 kcapi: controller [001]: fcpci-cf00-21 attached kcapi: controller [001] "fcpci-cf00-21" ready. capidrv: controller 1 up capidrv-1: now up (2 B channels) capidrv-1: D2 trace enabled fcpci: Loaded. CAPI 2.0 started up with major 68 (middleware+capifs) vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID i2c i2c-1: sendbytes: NAK bailout. chrome_sandbox (9253): /proc/9250/oom_adj is deprecated, please use /proc/9250/oom_score_adj instead. [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. hrtimer: interrupt took 3509247 ns [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. [drm:radeon_dvi_detect] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID