[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39-rc4pm+ (root@chateau) (gcc version 4.6.1 20110428 (prerelease) (Debian 4.6.0-6) ) #11 SMP Sun May 1 15:00:05 CEST 2011
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc4pm+ root=/dev/sda9 nouveau.modeset=1 nouveau.noaccel=1 pci=nomsi console=ttyS0,19200
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ fc000000 old size 32 MB
[    0.000000] Aperture from AGP @ fc000000 size 32 MB (APSIZE f38)
[    0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000
[    0.000000] RAMDISK: 37bb4000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f8860 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 000000007ffb0000 0003C (v01 A M I  OEMRSDT  09000922 MSFT 00000097)
[    0.000000] ACPI: FACP 000000007ffb0200 00084 (v02 A M I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000007ffb0450 04B66 (v01  4CDS2 4CDS2218 00000218 INTL 02002026)
[    0.000000] ACPI: FACS 000000007ffc0000 00040
[    0.000000] ACPI: APIC 000000007ffb0390 00078 (v01 A M I  OEMAPIC  09000922 MSFT 00000097)
[    0.000000] ACPI: MCFG 000000007ffb0410 0003C (v01 A M I  OEMMCFG  09000922 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000007ffc0040 00051 (v01 A M I  AMI_OEM  09000922 MSFT 00000097)
[    0.000000] ACPI: AAFT 000000007ffb4fc0 00027 (v01 A M I  OEMAAFT  09000922 MSFT 00000097)
[    0.000000] ACPI: HPET 000000007ffb4ff0 00038 (v01 A M I  VT-8237S 09000922 MSFT 00000097)
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffb0
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007fc00000 s75776 r8192 d22528 u524288
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516923
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc4pm+ root=/dev/sda9 nouveau.modeset=1 nouveau.noaccel=1 pci=nomsi console=ttyS0,19200
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ fc000000 old size 32 MB
[    0.000000] Aperture from AGP @ fc000000 size 32 MB (APSIZE f38)
[    0.000000] Memory: 2054448k/2096832k available (2708k kernel code, 452k absent, 41932k reserved, 1429k data, 512k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:512
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using HPET reference calibration
[    0.000000] Detected 2792.994 MHz processor.
[    0.028007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.98 BogoMIPS (lpj=11171976)
[    0.036006] pid_max: default: 32768 minimum: 301
[    0.040067] Security Framework initialized
[    0.044011] SELinux:  Disabled at boot.
[    0.048030] Mount-cache hash table entries: 256
[    0.052220] Initializing cgroup subsys ns
[    0.056009] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.060007] Initializing cgroup subsys cpuacct
[    0.064018] Initializing cgroup subsys devices
[    0.068042] CPU: Physical Processor ID: 0
[    0.072008] CPU: Processor Core ID: 0
[    0.076008] mce: CPU supports 4 MCE banks
[    0.080020] CPU0: Thermal monitoring enabled (TM1)
[    0.084011] using mwait in idle threads.
[    0.092406] ACPI: Core revision 20110316
[    0.104073] Setting APIC routing to flat
[    0.108525] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.154370] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
[    0.168009] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.176014] ... version:                0
[    0.180013] ... bit width:              40
[    0.184013] ... generic registers:      18
[    0.188013] ... value mask:             000000ffffffffff
[    0.192013] ... max period:             0000007fffffffff
[    0.196015] ... fixed-purpose events:   0
[    0.200014] ... event mask:             000000000003ffff
[    0.204374] Booting Node   0, Processors  #1
[    0.304040] Brought up 2 CPUs
[    0.308024] Total of 2 processors activated (11172.05 BogoMIPS).
[    0.312703] PM: Registering ACPI NVS region at 7ffc0000 (196608 bytes)
[    0.316146] NET: Registered protocol family 16
[    0.320080] ACPI: bus type pci registered
[    0.324081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.328024] PCI: not using MMCONFIG
[    0.332023] PCI: Using configuration type 1 for base access
[    0.340087] bio: create slab <bio-0> at 0
[    0.349392] ACPI: Executed 1 blocks of module-level executable AML code
[    0.365886] ACPI: Interpreter enabled
[    0.368028] ACPI: (supports S0 S1 S3 S4 S5)
[    0.380030] ACPI: Using IOAPIC for interrupt routing
[    0.384064] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.392116] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.444215] ACPI: No dock devices found.
[    0.448033] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.452334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
[    0.456273] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.460033] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.464033] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.468033] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.472034] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff]
[    0.476033] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfeafffff]
[    0.484667] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.500055] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.504146] pci 0000:00:13.1: PCI bridge to [bus 03-03] (subtractive decode)
[    0.524735] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
[    0.528350] pci_root PNP0A08:00: host bridge window [mem 0xfeb00000-0xfebfffff]
[    0.536263] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.557774] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.577773] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.596117] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.616120] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.641214] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.665214] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.689216] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.708106] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.712050] vgaarb: loaded
[    0.716086] PCI: Using ACPI for IRQ routing
[    0.720062] pci 0000:00:00.0: address space collision: [mem 0xfc000000-0xfdffffff pref] conflicts with PCI Bus 0000:02 [mem 0xfb000000-0xfeafffff]
[    0.724221] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.728053] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.741135] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.748081] Switching to clocksource hpet
[    0.754266] pnp: PnP ACPI init
[    0.755835] Switched to NOHz mode on CPU #0
[    0.797551] Switched to NOHz mode on CPU #1
[    0.822638] ACPI: bus type pnp registered
[    0.849496] system 00:05: [io  0x0295-0x0296] has been reserved
[    0.884982] system 00:05: [io  0x03e0-0x03e7] has been reserved
[    0.920426] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.955890] system 00:05: [io  0x0800-0x087f] has been reserved
[    0.991357] system 00:05: [io  0x0400-0x041f] has been reserved
[    1.026826] system 00:05: [mem 0xfecc0000-0xfecc0fff] could not be reserved
[    1.069107] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.110818] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.151432] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    1.191351] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref]
[    1.262660] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref]
[    1.334001] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref]
[    1.405342] pnp 00:0c: disabling [mem 0x00100000-0x7fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref]
[    1.476825] system 00:0c: [mem 0xfeb00000-0xffffffff] could not be reserved
[    1.519137] pnp: PnP ACPI: found 14 devices
[    1.544198] ACPI: ACPI bus type pnp unregistered
[    1.582086] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.613358] pci 0000:00:01.0:   bridge window [io  disabled]
[    1.647256] pci 0000:00:01.0:   bridge window [mem disabled]
[    1.681161] pci 0000:00:01.0:   bridge window [mem pref disabled]
[    1.717668] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    1.748971] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    1.785478] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfeafffff]
[    1.826145] pci 0000:00:02.0:   bridge window [mem 0xce000000-0xdfffffff pref]
[    1.869410] pci 0000:00:13.1: PCI bridge to [bus 03-03]
[    1.900709] pci 0000:00:13.1:   bridge window [io  disabled]
[    1.934615] pci 0000:00:13.1:   bridge window [mem disabled]
[    1.968521] pci 0000:00:13.1:   bridge window [mem pref disabled]
[    2.005061] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[    2.045319] NET: Registered protocol family 2
[    2.071467] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    2.114643] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    2.161917] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    2.202714] TCP: Hash tables configured (established 262144 bind 65536)
[    2.242326] TCP reno registered
[    2.261142] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    2.297140] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    2.335930] NET: Registered protocol family 1
[    2.362058] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    2.396634] Trying to unpack rootfs image as initramfs...
[    2.569928] Freeing initrd memory: 4336k freed
[    2.600550] audit: initializing netlink socket (disabled)
[    2.632951] type=2000 audit(1304263928.632:1): initialized
[    2.666386] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.704740] VFS: Disk quotas dquot_6.5.2
[    2.728273] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.766949] msgmni has been set to 4021
[    2.790144] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.834462] io scheduler noop registered
[    2.857957] io scheduler deadline registered
[    2.883561] io scheduler cfq registered (default)
[    2.912663] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.970685] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.132640] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.191194] brd: module loaded
[    3.209613] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    3.250277] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.311946] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.341890] mousedev: PS/2 mouse device common for all mice
[    3.375323] rtc_cmos 00:07: RTC can wake from S4
[    3.412212] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    3.448760] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    3.488965] cpuidle: using governor ladder
[    3.502572] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.565050] cpuidle: using governor menu
[    3.588638] TCP cubic registered
[    3.607949] NET: Registered protocol family 17
[    3.634581] Registering the dns_resolver key type
[    3.662839] Refined TSC clocksource calibration: 2793.001 MHz.
[    3.697750] rtc_cmos 00:07: setting system clock to 2011-05-01 15:32:15 UTC (1304263935)
[    3.697767] Switching to clocksource tsc
[    3.771298] Freeing unused kernel memory: 512k freed
Loading, please wait...
mount: mounting none on /dev failed: No such device
W: devtmpfs not available, falling back to tmpfs for /dev
Couldnt get a file descriptor re[    3.887272] Uniform Multi-Platform E-IDE driver
[    3.900015] via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    3.900064] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.900256] eth0: VIA Rhine II at 0x1c000, 00:19:66:5e:03:90, IRQ 23.
[    3.900988] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[    3.919336] usbcore: registered new interface driver usbfs
[    3.919366] usbcore: registered new interface driver hub
[    4.134157] usbcore: registered new device driver usb
[    4.137572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.137618] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    4.137647] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    4.137657] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ferring to the console
KDGKBMOD[    4.350030] ehci_hcd 0000:00:10.4: debug port 1
E: Bad file desc[    4.383447] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfafffc00
riptor
loadkeys: error reading [    4.436089] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
keyboard mode
u[    4.476616] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
devd[414]: error[    4.525515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
: runtime direct[    4.577099] usb usb1: Product: EHCI Host Controller
ory '/run/udev' [    4.614589] usb usb1: Manufacturer: Linux 2.6.39-rc4pm+ ehci_hcd
not writable, fo[    4.658842] usb usb1: SerialNumber: 0000:00:10.4
r now falling ba[    4.694915] hub 1-0:1.0: USB hub found
ck to '/dev/.ude[    4.725515] hub 1-0:1.0: 8 ports detected
v'
udevd[541]:[    4.758325] via82cxxx 0000:00:0f.1: VIA vt8237s (rev 00) IDE UDMA133
 exec of program[    4.804178] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x07)
 'net.agent' fai[    4.854162] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
led

udevd[54[    4.906179]     ide0: BM-DMA at 0xfc00-0xfc07
4]: exec of prog[    4.940550]     ide1: BM-DMA at 0xfc08-0xfc0f
[    4.940696] SCSI subsystem initialized
[    4.943575] uhci_hcd: USB Universal Host Controller Interface driver
ram 'net.agent' failed

[    5.312017] usb 1-2: new high speed USB device number 3 using ehci_hcd
[    5.480393] usb 1-2: New USB device found, idVendor=0409, idProduct=005a
[    5.520515] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.563540] hub 1-2:1.0: USB hub found
[    5.586156] hub 1-2:1.0: 4 ports detected
[    5.808145] hda: Optiarc DVD RW AD-7200A, ATAPI CD/DVD-ROM drive
[    5.896089] usb 1-2.4: new high speed USB device number 5 using ehci_hcd
[    6.051736] usb 1-2.4: New USB device found, idVendor=0402, idProduct=5602
[    6.092907] usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.136687] usb 1-2.4: Product: USB2.0 Camera
[    6.528374] hda: UDMA/66 mode selected
[    7.120074] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    7.148604] ide1 at 0x170-0x177,0x376 on irq 15
[    7.176230] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    7.218949] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    7.250264] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    7.308048] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c480
[    7.342496] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    7.383170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.426425] usb usb2: Product: UHCI Host Controller
[    7.455649] usb usb2: Manufacturer: Linux 2.6.39-rc4pm+ uhci_hcd
[    7.491643] usb usb2: SerialNumber: 0000:00:10.0
[    7.519427] hub 2-0:1.0: USB hub found
[    7.541874] hub 2-0:1.0: 2 ports detected
[    7.566018] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    7.608763] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    7.640052] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    7.700043] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800
[    7.734487] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    7.775150] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.818414] usb usb3: Product: UHCI Host Controller
[    7.847653] usb usb3: Manufacturer: Linux 2.6.39-rc4pm+ uhci_hcd
[    7.883622] usb usb3: SerialNumber: 0000:00:10.1
[    7.911338] hub 3-0:1.0: USB hub found
[    7.933757] hub 3-0:1.0: 2 ports detected
[    7.957895] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    8.000634] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    8.031938] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    8.088044] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c880
[    8.122514] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    8.163134] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.206413] usb usb4: Product: UHCI Host Controller
[    8.235623] usb usb4: Manufacturer: Linux 2.6.39-rc4pm+ uhci_hcd
[    8.236018] usb 2-1: new low speed USB device number 2 using uhci_hcd
[    8.310160] usb usb4: SerialNumber: 0000:00:10.2
[    8.337935] hub 4-0:1.0: USB hub found
[    8.360382] hub 4-0:1.0: 2 ports detected
[    8.384514] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    8.427266] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    8.458557] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    8.516043] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000cc00
[    8.550500] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    8.591176] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.634436] usb usb5: Product: UHCI Host Controller
[    8.663667] usb usb5: Manufacturer: Linux 2.6.39-rc4pm+ uhci_hcd
[    8.699641] usb usb5: SerialNumber: 0000:00:10.3
[    8.727413] hub 5-0:1.0: USB hub found
[    8.749879] hub 5-0:1.0: 2 ports detected
[    8.774046] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    8.775534] usb 2-1: New USB device found, idVendor=06a3, idProduct=040b
[    8.775539] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    8.775542] usb 2-1: Product: Saitek P990 Dual Analog Pad
[    8.896011] usb 3-1: new low speed USB device number 2 using uhci_hcd
[    8.970478] sata_via 0000:00:0f.0: routed to hard irq line 11
[    9.005351] scsi0 : sata_via
[    9.022741] scsi1 : sata_via
[    9.030669] input: Saitek P990 Dual Analog Pad as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input1
[    9.030728] generic-usb 0003:06A3:040B.0001: input,hidraw0: USB HID v1.00 Joystick [Saitek P990 Dual Analog Pad] on usb-0000:00:10.0-1/input0
[    9.030753] usbcore: registered new interface driver usbhid
[    9.030755] usbhid: USB HID core driver
[    9.064525] usb 3-1: New USB device found, idVendor=1bcf, idProduct=0007
[    9.064530] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    9.064533] usb 3-1: Product: USB Optical Mouse
[    9.084872] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input2
[    9.084981] generic-usb 0003:1BCF:0007.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:10.1-1/input0
[    9.474783] ata1: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 21
[    9.517517] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 21
[    9.764018] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   10.012013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.252302] ata2.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[   10.286203] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   10.368906] ata2.00: configured for UDMA/133
[   10.394607] scsi 1:0:0:0: Direct-Access     ATA      ST3160815AS      4.AA PQ: 0 ANSI: 5
[   10.454576] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[   10.459544] ide-cd driver 5.00
[   10.460537] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[   10.460545] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.593270] sd 1:0:0:0: [sda] Write Protect is off
[   10.621992] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
udevd[574]: exec of program 'cdrom_id --export /dev/.tmp-block-3:0' failed

[   10.780205]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[   10.818858] sd 1:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting roo[   12.937953] PM: Starting manual resume from disk
t file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... resume: libgcrypt version: 1.4.6
done.
[   13.053528] EXT3-fs: barriers not enabled
[   13.085787] kjournald starting.  Commit interval 5 seconds
[   13.085813] EXT3-fs (sda9): mounted filesystem with writeback data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudevd[662]: error: runtime director[   14.832330] udevd[663]: starting vers
ion 168
y '/run/udev' not writable, for now falling back to '/dev/.udev'
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
[   15.481217] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[   15.490605] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.563595] ACPI: Sleep Button [SLPB]
[   15.585643] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   15.609881] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.615866] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   15.713804] ACPI: Power Button [PWRB]
[   15.735818] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   15.780155] ACPI: Power Button [PWRF]
[   16.002711] Linux agpgart interface v0.103
[   16.039427] agpgart: Detected VIA PT880 Ultra chipset
[   16.071760] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xfc000000
Setting parameters of disc:[   16.646515] parport_pc 00:04: reported by Plug and Play ACPI
[   16.680538] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   16.978905] [drm] Initialized drm 1.1.0 20060810
[   17.153641] HDA Intel: probe of 0000:02:00.1 failed with error -2
[   17.190162] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   17.233443] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[   20.274519] hda_codec: ALC662 rev1: BIOS auto-probing.
 (none).
[   20.405067] Linux video capture interface: v2.00
[   20.426574] nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[   20.428164] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x0a5000a2)
[   20.431599] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[   20.584286] gspca: v2.12.0 registered
[   20.602812] [drm] nouveau 0000:02:00.0: ... appears to be valid
[   20.602817] [drm] nouveau 0000:02:00.0: BIT BIOS found
[   20.602821] [drm] nouveau 0000:02:00.0: Bios version 70.16.2e.00
[   20.602824] [drm] nouveau 0000:02:00.0: Pointer to BIT loadval table invalid
[   20.602829] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[   20.602832] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[   20.602836] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000000
[   20.602840] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[   20.602843] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011362 00020010
[   20.602846] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 01022310 00000000
[   20.602848] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 0000000e 00000000
[   20.602853] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[   20.602857] [drm] nouveau 0000:02:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[   20.602860] [drm] nouveau 0000:02:00.0:   1: 0x00002161: type 0x61 idx 1 tag 0x08
[   20.602864] [drm] nouveau 0000:02:00.0:   2: 0x00000200: type 0x00 idx 2 tag 0xff
[   20.602869] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD6B5
[   20.663494] [drm] nouveau 0000:02:00.0: 0xD9D7: Condition still not met after 20ms, skipping following opcodes
[   20.683344] [drm] nouveau 0000:02:00.0: 0xD9DB: Condition still not met after 20ms, skipping following opcodes
[   20.683383] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xDBC5
[   20.691157] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xEA72
[   20.691169] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEAB0
[   20.733749] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xECF0
[   20.733753] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xED55
[   20.753600] [drm] nouveau 0000:02:00.0: 0xED55: Condition still not met after 20ms, skipping following opcodes
[   21.880447] gspca: probing 0402:5602
[   21.901850] ALi m5602: Probing for a po1030 sensor
[   21.944244] ALi m5602: Probing for a mt9m111 sensor
[   21.989752] ALi m5602: Probing for a s5k4aa sensor
[   22.046635] ALi m5602: Probing for an ov9650 sensor
[   22.091642] ALi m5602: Detected an ov9650 sensor
[   22.206626] gspca: video0 created
[   22.226550] usbcore: registered new interface driver ALi m5602
[   22.268567] [drm] nouveau 0000:02:00.0: 3 available performance level(s)
[   22.308758] [drm] nouveau 0000:02:00.0: 0: memory 135MHz core 135MHz shader 270MHz voltage 900mV
[   22.361430] [drm] nouveau 0000:02:00.0: 1: memory 324MHz core 405MHz shader 810MHz voltage 900mV
[   22.414048] [drm] nouveau 0000:02:00.0: 3: memory 790MHz core 625MHz shader 1360MHz voltage 1100mV
[   22.467729] [drm] nouveau 0000:02:00.0: c: memory 950MHz core 550MHz shader 1400MHz
[   22.513590] nouveau 0000:02:00.0: PCI: Disallowing DAC for device
[   22.550140] [TTM] Zone  kernel: Available graphics memory: 1029648 kiB.
[   22.589762] [TTM] Initializing pool allocator.
[   22.616404] [drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM
Setting preliminary keymap...[   22.663307] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[   22.959705] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   22.999322] [drm] No driver support for vblank timestamp query.
[   23.041044] BUG: unable to handle kernel NULL pointer dereference at           (null)
[   23.044003] IP: [<ffffffffa047ccf0>] nv_wo32+0x17/0xb1 [nouveau]
[   23.044003] PGD 7b60c067 PUD 7d32a067 PMD 0
[   23.044003] Oops: 0000 [#1] SMP
[   23.044003] last sysfs file: /sys/devices/virtual/net/lo/operstate
[   23.044003] CPU 1
[   23.044003] Modules linked in: gspca_m5602 gspca_main nouveau(+) videodev v4l2_compat_ioctl32 ttm snd_hda_codec_realt
ek joydev drm_kms_helper snd_hda_intel snd_hda_codec drm snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss i2c
_algo_bit parport_pc snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq video processor parport snd_timer snd_seq_devic
e thermal_sys snd soundcore snd_page_alloc i2c_viapro via_agp evdev i2c_core agpgart hwmon pcspkr shpchp pci_hotplug but
ton ext3 jbd mbcache ide_cd_mod sd_mod cdrom usbhid hid ata_generic sata_via libata uhci_hcd scsi_mod via82cxxx ide_pci_
generic ehci_hcd usbcore via_rhine mii ide_core [last unloaded: scsi_wait_scan]
[   23.044003]
[   23.044003] Pid: 758, comm: modprobe Not tainted 2.6.39-rc4pm+ #11 To Be Filled By O.E.M. To Be Filled By O.E.M./4Cor
eDual-SATA2.
[   23.044003] RIP: 0010:[<ffffffffa047ccf0>]  [<ffffffffa047ccf0>] nv_wo32+0x17/0xb1 [nouveau]
[   23.044003] RSP: 0018:ffff88007d327ab8  EFLAGS: 00010096
[   23.044003] RAX: 0000000000000000 RBX: ffff88007be63000 RCX: 0000000000000002
[   23.044003] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000
[   23.044003] RBP: ffff88007d327af8 R08: 0000000000000000 R09: ffff88007d0043d0
[   23.044003] R10: 0000000000000005 R11: 0000000000000005 R12: ffff88007cb00000
[   23.044003] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001
[   23.044003] FS:  00007fa43fdc1700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
[   23.044003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   23.044003] CR2: 0000000000000000 CR3: 000000007b63b000 CR4: 00000000000006e0
[   23.044003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   23.044003] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   23.044003] Process modprobe (pid: 758, threadinfo ffff88007d326000, task ffff88007d2cc670)
[   23.044003] Stack:
[   23.044003]  0000000000000000 ffff88007be63000 0000000077359400 ffff88007be63000
[   23.044003]  ffff88007cb00000 0000000000000000 0000000000000001 ffff88007cb00000
[   23.044003]  ffff88007d327b48 ffffffffa04a1537 ffff88007cb00000 0000000000000000
[   23.044003] Call Trace:
[   23.044003]  [<ffffffffa04a1537>] nv50_fifo_playlist_update+0xb5/0x138 [nouveau]
[   23.044003]  [<ffffffffa04a1db9>] nv50_fifo_create_context+0x2e7/0x304 [nouveau]
[   23.044003]  [<ffffffffa047aa69>] nouveau_channel_alloc+0x4c2/0x56f [nouveau]
[   23.044003]  [<ffffffffa04797bb>] nouveau_card_init+0xfc8/0x10f2 [nouveau]
[   23.044003]  [<ffffffffa0479e0b>] nouveau_load+0x513/0x55a [nouveau]
[   23.044003]  [<ffffffffa0358054>] drm_get_pci_dev+0x15d/0x262 [drm]
[   23.044003]  [<ffffffffa04e86a4>] nouveau_pci_probe+0x10/0x12 [nouveau]
[   23.044003]  [<ffffffff81180310>] pci_device_probe+0x57/0x82
[   23.044003]  [<ffffffff811eb16f>] ? driver_sysfs_add+0x6b/0x90
[   23.044003]  [<ffffffff811eb371>] driver_probe_device+0xa5/0x135
[   23.044003]  [<ffffffff811eb456>] __driver_attach+0x55/0x78
[   23.044003]  [<ffffffff811eb401>] ? driver_probe_device+0x135/0x135
[   23.044003]  [<ffffffff811ea645>] bus_for_each_dev+0x4e/0x82
[   23.044003]  [<ffffffff811eb07d>] driver_attach+0x19/0x1b
[   23.044003]  [<ffffffff811ead03>] bus_add_driver+0xb4/0x207
[   23.044003]  [<ffffffff811eb8d0>] driver_register+0x93/0x100
[   23.044003]  [<ffffffff81180efd>] __pci_register_driver+0x51/0xbc
[   23.044003]  [<ffffffffa03581de>] drm_pci_init+0x85/0xea [drm]
[   23.044003]  [<ffffffff81180f68>] ? __pci_register_driver+0xbc/0xbc
[   23.044003]  [<ffffffffa0508000>] ? 0xffffffffa0507fff
[   23.044003]  [<ffffffffa050804f>] nouveau_init+0x4f/0x51 [nouveau]
[   23.044003]  [<ffffffff8100020a>] do_one_initcall+0x7a/0x134
[   23.044003]  [<ffffffff8106627e>] sys_init_module+0xa1/0x1df
[   23.044003]  [<ffffffff812a1a92>] system_call_fastpath+0x16/0x1b
[   23.044003] Code: 03 7b 28 e8 44 69 cf e0 5a 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 41 57 41 56 41 55 41 54 53
48 83 ec 18 48 89 f8 41 89 d7 <4c> 8b 2f 49 8b 9d 30 03 00 00 44 8b 67 38 41 83 fc ff 74 06 80
[   23.044003] RIP  [<ffffffffa047ccf0>] nv_wo32+0x17/0xb1 [nouveau]
[   23.044003]  RSP <ffff88007d327ab8>
[   23.044003] CR2: 0000000000000000
[   23.044003] ---[ end trace f9b95695b4a83031 ]---
udevd[689]: '/sbin/modprobe -b pci:v000010DEd00000A20sv00001043sd00008311bc03sc00i00' [758] terminated by signal 9 (Kill
ed)
done.
Activating swap...[   43.365413] Adding 1951860k swap on /dev/sda6.  Priority:-1 extents:1 across:1951860k
done.
Checking root file system...fsck from util-linux-ng 2.17.2
ROOT64: clean, 3[   43.874525] EXT3-fs (sda9): using internal journal
05074/1221600 files, 4090420/4883752 blocks
done.
Cleaning up ifupdown....
[   44.029860] loop: module loaded
Setting up netwo[   44.089341] w83627hf: w83627hf: Found W83697HF chip at 0x290
rking....
Loading kernel modules...