Linux version 2.6.39-rc5 (root@fly) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #14 SMP Mon May 2 22:19:32 CEST 2011 Command line: auto BOOT_IMAGE=Default ro root=801 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000009b63f000 (usable) BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved) BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS) BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data) BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable) BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000158000000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. DMI: Hewlett-Packard HP TouchSmart tm2 Notebook PC /1486, BIOS F.23 10/28/2010 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x158000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-EFFFF write-through F0000-FFFFF write-combining MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFE00000 mask FFFE00000 write-protect 2 base 080000000 mask FE0000000 write-back 3 base 09C000000 mask FFC000000 uncachable 4 base 09B800000 mask FFF800000 uncachable 5 base 100000000 mask F80000000 write-back 6 base 158000000 mask FF8000000 uncachable 7 base 160000000 mask FE0000000 uncachable x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0x9b800 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000098000] 98000 size 20480 init_memory_mapping: 0000000000000000-000000009b800000 0000000000 - 009b800000 page 2M kernel direct mapping tables up to 9b800000 @ 9b63b000-9b63f000 init_memory_mapping: 0000000100000000-0000000158000000 0100000000 - 0158000000 page 2M kernel direct mapping tables up to 158000000 @ 157ff9000-158000000 ACPI: RSDP 00000000000fe020 00024 (v02 HP ) ACPI: XSDT 000000009b7fe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 000000009b7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: DSDT 000000009b7e9000 0FCE7 (v02 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: FACS 000000009b75e000 00040 ACPI: ASF! 000000009b7fd000 000A5 (v32 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: HPET 000000009b7fb000 00038 (v01 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: APIC 000000009b7fa000 0008C (v02 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: MCFG 000000009b7f9000 0003C (v01 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117) ACPI: SSDT 000000009b7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117) ACPI: BOOT 000000009b7e4000 00028 (v01 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117) ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117) ACPI: ASPT 000000009b7e1000 00034 (v04 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: SSDT 000000009b7de000 01A8F (v01 AmdRef AmdTabl 00001000 INTL 20051117) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880148200000-ffff88014b9fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00158000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x0009b63f 0: 0x0009b7ff -> 0x0009b800 0: 0x00100000 -> 0x00158000 On node 0 totalpages: 996813 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3920 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 618104 pages, LIFO batch:31 Normal zone: 4928 pages used for memmap Normal zone: 355520 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 8 Processors exceeds NR_CPUS limit of 4 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000 PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000 PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000 PM: Registered nosave memory: 000000009b800000 - 00000000a0000000 PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880157c00000 s73600 r8192 d20608 u524288 pcpu-alloc: s73600 r8192 d20608 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977544 Kernel command line: auto BOOT_IMAGE=Default ro root=801 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Memory: 3850816k/5636096k available (3564k kernel code, 1648844k absent, 136436k reserved, 1882k data, 424k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. CONFIG_RCU_FANOUT set to non-default value of 32 RCU-based detection of stalled CPUs is disabled. NR_IRQS:384 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1196.981 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.96 BogoMIPS (lpj=4787924) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20110316 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i5 CPU U 430 @ 1.20GHz stepping 05 Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 98000 CPU1: Thermal monitoring handled by SMI #2 smpboot cpu 2: start_ip = 98000 CPU2: Thermal monitoring handled by SMI #3 Ok. smpboot cpu 3: start_ip = 98000 CPU3: Thermal monitoring handled by SMI Brought up 4 CPUs Total of 4 processors activated (9575.82 BogoMIPS). PM: Registering ACPI NVS region at 9b6bf000 (1048576 bytes) NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 000000009b691a98 00334 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00334 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 000000009b690018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: SSDT 000000009b691718 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 000000009b68fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness ACPI: Power Resource [FN00] (on) ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: [8086:0046] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x4050-0x4057] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 pci 0000:00:16.0: reg 10: [mem 0xc4506100-0xc450610f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 pci 0000:00:1a.0: reg 10: [mem 0xc4505c00-0xc4505fff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 pci 0000:00:1d.0: reg 10: [mem 0xc4505800-0xc4505bff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601 pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f] pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f] pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047] pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f] pci 0000:00:1f.2: reg 24: [mem 0xc4505000-0xc45057ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xc4506000-0xc45060ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 pci 0000:00:1f.6: reg 10: [mem 0xc4504000-0xc4504fff 64bit] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xc4400000-0xc441ffff 64bit] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403 pci 0000:01:00.1: reg 10: [mem 0xc4420000-0xc4423fff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] pci 0000:03:00.0: [14e4:4727] type 0 class 0x000280 pci 0000:03:00.0: reg 10: [mem 0xc2400000-0xc2403fff 64bit] pci 0000:03:00.0: supports D1 D2 pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 9 1f ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600 pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600 pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600 pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600 pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600 pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600 pci_bus 0000:ff: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d000 - 000000000009ffff reserve RAM buffer: 000000009b63f000 - 000000009bffffff reserve RAM buffer: 000000009b800000 - 000000009bffffff cfg80211: Calling CRDA to update world regulatory domain hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #3 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #1 pnp 00:00: [bus 00-fe] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0xa0000000-0xfeafffff window] pnp 00:00: [mem 0xfed40000-0xfed44fff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [io 0x0000-0x001f] pnp 00:01: [io 0x0081-0x0091] pnp 00:01: [io 0x0093-0x009f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: [dma 4] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [mem 0xff000000-0xffffffff] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [io 0x00f0] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x002e-0x002f] pnp 00:05: [io 0x004e-0x004f] pnp 00:05: [io 0x0061] pnp 00:05: [io 0x0063] pnp 00:05: [io 0x0065] pnp 00:05: [io 0x0067] pnp 00:05: [io 0x0070] pnp 00:05: [io 0x0080] pnp 00:05: [io 0x0092] pnp 00:05: [io 0x00b2-0x00b3] pnp 00:05: [io 0x0680-0x069f] pnp 00:05: [io 0x0800-0x080f] pnp 00:05: [io 0x0810-0x0813] pnp 00:05: [io 0xffff] pnp 00:05: [io 0x0400-0x047f] pnp 00:05: [io 0x0500-0x0501] pnp 00:05: [io 0x0700-0x077f] pnp 00:05: [io 0x164e-0x164f] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff] system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x0800-0x080f] has been reserved system 00:05: [io 0x0810-0x0813] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x0501] has been reserved system 00:05: [io 0x0700-0x077f] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: [io 0x0070-0x0077] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN1e2d SYN1e00 SYN0002 PNP0f13 (active) pnp 00:09: [irq 23] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] pnp 00:0a: [mem 0xfed10000-0xfed13fff] pnp 00:0a: [mem 0xfed18000-0xfed18fff] pnp 00:0a: [mem 0xfed19000-0xfed19fff] pnp 00:0a: [mem 0xe0000000-0xefffffff] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] pnp 00:0a: [mem 0xff000000-0xffffffff] pnp 00:0a: [mem 0xfee00000-0xfeefffff] pnp 00:0a: [mem 0xc4600000-0xc4600fff] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:0a: [mem 0xc4600000-0xc4600fff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [bus ff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) IPv4 FIB: Using LC-trie version 0.409 TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device pci 0000:00:1a.0: EHCI: BIOS handoff pci 0000:00:1d.0: EHCI: BIOS handoff PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff88009763b000 - ffff88009b63b000 software IO TLB at phys 0x9763b000 - 0x9b63b000 Simple Boot Flag at 0x44 set to 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 7521 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x25 intel_idle: lapic_timer_reliable_states 0xffffffff ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [FAN0] (on) ACPI: acpi_idle yielding to intel_idle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (55 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (40 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ02] (63 C) brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505100 irq 19 ata2: DUMMY ata3: DUMMY ata4: DUMMY ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ACPI: Battery Slot [BAT0] (battery present) ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3 ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr ehci_hcd 0000:00:1a.0: support lpm ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: supports USB remote wakeup ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc4505c00 ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.39-rc5 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3 ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr ehci_hcd 0000:00:1d.0: support lpm ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: supports USB remote wakeup ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc4505800 ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: default language 0x0409 usb usb2: udev 1, busnum 2, minor = 128 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.39-rc5 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 20ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 80 td 96 uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 lirc_dev: IR Remote Control driver registered, major 252 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 IR LIRC bridge handler initialized Linux video capture interface: v2.00 gspca: v2.12.0 registered coretemp coretemp.0: TjMax is 105 C. coretemp coretemp.2: TjMax is 105 C. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iTCO_vendor_support: vendor-support=0 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT hub 1-0:1.0: port 1: status 0501 change 0001 ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT hub 2-0:1.0: port 1: status 0501 change 0001 HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: HDA Intel at 0xc4500000 irq 22 #1: HD-Audio Generic at 0xc4420000 irq 17 IPv4 over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' PM: Hibernation image not present or could not be loaded. rtc_cmos 00:06: setting system clock to 2011-05-02 20:20:20 UTC (1304367620) hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000 hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1a.0: port 1 high speed ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OC72E, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb 1-1: new high speed USB device number 2 using ehci_hcd ehci_hcd 0000:00:1a.0: port 1 high speed ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT ehci_hcd 0000:00:1a.0: set dev address 2 for port 1 ehci_hcd 0000:00:1a.0: LPM: no device attached usb 1-1: udev 2, busnum 1, minor = 1 usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) hub 1-1:1.0: usb_probe_interface hub 1-1:1.0: usb_probe_interface - got id hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected hub 1-1:1.0: standalone hub hub 1-1:1.0: individual port power switching hub 1-1:1.0: individual port over-current protection hub 1-1:1.0: Single TT hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-1:1.0: Port indicators are supported hub 1-1:1.0: power on to power good time: 100ms hub 1-1:1.0: local power source is good hub 1-1:1.0: enabling power on all ports hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000 hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT hub 1-1:1.0: port 3: status 0101 change 0001 hub 1-1:1.0: port 4: status 0101 change 0001 usb 2-1: new high speed USB device number 2 using ehci_hcd ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk usb 1-1: link qh256-0001/ffff88015762ae80 start 1 [1/0 us] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 ehci_hcd 0000:00:1d.0: LPM: no device attached usb 2-1: udev 2, busnum 2, minor = 129 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: usb_probe_device usb 2-1: configuration #1 chosen from 1 choice usb 2-1: adding 2-1:1.0 (config #1, interface 0) hub 2-1:1.0: usb_probe_interface hub 2-1:1.0: usb_probe_interface - got id hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected hub 2-1:1.0: standalone hub hub 2-1:1.0: individual port power switching hub 2-1:1.0: individual port over-current protection hub 2-1:1.0: Single TT hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 2-1:1.0: Port indicators are supported hub 2-1:1.0: power on to power good time: 100ms hub 2-1:1.0: local power source is good hub 2-1:1.0: enabling power on all ports hub 1-1:1.0: state 7 ports 6 chg 0018 evt 0000 hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s usb 1-1.3: new full speed USB device number 3 using ehci_hcd hub 2-1:1.0: port 5: status 0101 change 0001 hub 2-1:1.0: port 6: status 0101 change 0001 usb 1-1.3: skipped 1 descriptor after interface usb 1-1.3: default language 0x0409 usb 1-1.3: udev 3, busnum 1, minor = 2 usb 1-1.3: New USB device found, idVendor=03f0, idProduct=231d usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.3: Product: HP Integrated Module usb 1-1.3: Manufacturer: Broadcom Corp usb 1-1.3: usb_probe_device usb 1-1.3: configuration #1 chosen from 1 choice usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1) usb 1-1.3: adding 1-1.3:1.2 (config #1, interface 2) usb 1-1.3: adding 1-1.3:1.3 (config #1, interface 3) hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s usb 2-1: link qh256-0001/ffff88015762aa80 start 1 [1/0 us] Refined TSC clocksource calibration: 1196.999 MHz. Switching to clocksource tsc usb 1-1.4: new full speed USB device number 4 using ehci_hcd usb 1-1.4: ep0 maxpacket = 8 usb 1-1.4: default language 0x0409 usb 1-1.4: udev 4, busnum 1, minor = 3 usb 1-1.4: New USB device found, idVendor=138a, idProduct=0005 usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1 usb 1-1.4: SerialNumber: 0510f9f55000 usb 1-1.4: usb_probe_device usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0008 hub 2-1:1.0: state 7 ports 8 chg 0060 evt 0000 hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 EXT3-fs: barriers not enabled usb 2-1.5: new full speed USB device number 3 using ehci_hcd kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:1. Freeing unused kernel memory: 424k freed usb 2-1.5: ep0 maxpacket = 8 usb 2-1.5: skipped 1 descriptor after interface usb 2-1.5: skipped 1 descriptor after interface usb 2-1.5: default language 0x0409 usb 2-1.5: udev 3, busnum 2, minor = 130 usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e3 usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.5: Product: ISD-V4 usb 2-1.5: Manufacturer: Tablet usb 2-1.5: usb_probe_device usb 2-1.5: configuration #1 chosen from 1 choice usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) usbhid 2-1.5:1.0: usb_probe_interface usbhid 2-1.5:1.0: usb_probe_interface - got id usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) usbhid 2-1.5:1.1: usb_probe_interface usbhid 2-1.5:1.1: usb_probe_interface - got id hub 2-1:1.0: port 6, status 0101, change 0000, 12 Mb/s usb 2-1.6: new high speed USB device number 4 using ehci_hcd usb 2-1.6: skipped 1 descriptor after configuration usb 2-1.6: skipped 6 descriptors after interface usb 2-1.6: skipped 1 descriptor after endpoint usb 2-1.6: skipped 6 descriptors after interface usb 2-1.6: default language 0x0409 usb 2-1.6: udev 4, busnum 2, minor = 131 usb 2-1.6: New USB device found, idVendor=10f1, idProduct=1a16 usb 2-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 2-1.6: Product: HP Webcam usb 2-1.6: Manufacturer: Importek usb 2-1.6: usb_probe_device usb 2-1.6: configuration #1 chosen from 1 choice usb 2-1.6: adding 2-1.6:1.0 (config #1, interface 0) usb 2-1.6: adding 2-1.6:1.1 (config #1, interface 1) hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0040 udev: starting version 151 udevd (1089): /proc/1089/oom_adj is deprecated, please use /proc/1089/oom_score_adj instead. brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. brcmsmac 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 brcmsmac 0000:03:00.0: setting latency timer to 64 Linux agpgart interface v0.103 wacom 2-1.5:1.0: usb_probe_interface wacom 2-1.5:1.0: usb_probe_interface - got id input: Wacom ISDv4 E3 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5 wacom 2-1.5:1.1: usb_probe_interface wacom 2-1.5:1.1: usb_probe_interface - got id input: Wacom ISDv4 E3 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input6 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: no MSI. Back to INTx. r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90010128000, d8:d3:85:39:89:fb, XID 083000c0 IRQ 16 [drm] Initialized drm 1.1.0 20060810 agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 32768K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle radeon 0000:01:00.0: enabling device (0000 -> 0003) radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:00.0: setting latency timer to 64 mtrr: no more MTRRs available [drm] MTRR allocation failed. Graphics performance may suffer. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device drm: registered panic notifier [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness acpi device:02: registered as cooling_device5 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS acpi device:0b: registered as cooling_device6 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input8 ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0). [drm] register mmio base: 0xC4400000 [drm] register mmio size: 131072 vga_switcheroo: enabled radeon atpx: version is 1 usb 2-1: clear tt buffer port 5, a3 ep0 t80020c82 usb 2-1.5: modprobe timed out on ep0out len=0/2 usbcore: registered new interface driver wacom wacom: v1.52:USB Wacom tablet driver atkbd serio0: Unknown key pressed (translated set 2, code 0x81 on isa0060/serio0). atkbd serio0: Use 'setkeycodes e001 ' to make it known. ATOM BIOS: HP radeon 0000:01:00.0: GPU softreset radeon 0000:01:00.0: GRBM_STATUS=0xFFFFFFFF radeon 0000:01:00.0: GRBM_STATUS_SE0=0xFFFFFFFF radeon 0000:01:00.0: GRBM_STATUS_SE1=0xFFFFFFFF radeon 0000:01:00.0: SRBM_STATUS=0xFFFFFFFF radeon 0000:01:00.0: Wait for MC idle timedout ! radeon 0000:01:00.0: GRBM_SOFT_RESET=0x00007F6B radeon 0000:01:00.0: GRBM_STATUS=0xFFFFFFFF radeon 0000:01:00.0: GRBM_STATUS_SE0=0xFFFFFFFF radeon 0000:01:00.0: GRBM_STATUS_SE1=0xFFFFFFFF radeon 0000:01:00.0: SRBM_STATUS=0xFFFFFFFF radeon 0000:01:00.0: limiting VRAM radeon 0000:01:00.0: VRAM: 3584M 0x0000000000000000 - 0x00000000DFFFFFFF (3584M used) radeon 0000:01:00.0: GTT: 512M 0x00000000E0000000 - 0x00000000FFFFFFFF mtrr: no more MTRRs available [drm] Detected VRAM RAM=3584M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 1925620 kiB. [TTM] Initializing pool allocator. [drm] radeon: 3584M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. radeon 0000:01:00.0: IH ring buffer overflow (0xFFFFFFFF, 0, 15) [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading CEDAR Microcode radeon 0000:01:00.0: Wait for MC idle timedout ! radeon 0000:01:00.0: Wait for MC idle timedout ! radeon 0000:01:00.0: WB enabled BUG: unable to handle kernel paging request at ffffc90410981ffc IP: [] evergreen_cp_resume+0x4b5/0xe05 [radeon] PGD 15740e067 PUD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/uevent CPU 2 Modules linked in: radeon(+) i915 ttm drm_kms_helper intel_agp intel_gtt drm i2c_algo_bit r8169 cfbcopyarea wacom agpgart cfbimgblt cfbfillrect brcmsmac(C) Pid: 1189, comm: modprobe Tainted: G C 2.6.39-rc5 #14 Hewlett-Packard HP TouchSmart tm2 Notebook PC /1486 RIP: 0010:[] [] evergreen_cp_resume+0x4b5/0xe05 [radeon] RSP: 0018:ffff880155007cb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8801565ac000 RCX: 000000004eced9ab RDX: ffffc90410981ffc RSI: 0000000000000007 RDI: ffff8801565ac000 RBP: 0000000000000011 R08: 0000000000000005 R09: 000000004eaabd3c R10: 0000000000000000 R11: ffff8801567fddb8 R12: 0000000000000911 R13: 0000000000c10027 R14: ffff880157658000 R15: ffff880157658380 FS: 00007f7f9416c700(0000) GS:ffff880157d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90410981ffc CR3: 0000000155fd2000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 1189, threadinfo ffff880155006000, task ffff8801577d61e0) Stack: ffff8801565ac000 0000000000000000 00000000fffffff4 ffffffffa02199e0 ffff8801565ac000 ffff8801565ac000 ffff8801565ac000 ffffffffa01ae15c ffff880157658000 ffff880157658000 ffff8801565ac000 ffffffffa01af6d4 Call Trace: [] ? evergreen_init+0x18d/0x239 [radeon] [] ? radeon_device_init+0x39b/0x411 [radeon] [] ? radeon_driver_load_kms+0xb9/0x11d [radeon] [] ? drm_get_pci_dev+0x14f/0x259 [drm] [] ? local_pci_probe+0x49/0x92 [] ? pci_device_probe+0x5b/0x87 [] ? driver_sysfs_add+0x66/0x8d [] ? driver_probe_device+0xa8/0x138 [] ? __driver_attach+0x4f/0x6f [] ? driver_probe_device+0x138/0x138 [] ? bus_for_each_dev+0x44/0x78 [] ? bus_add_driver+0xb9/0x201 [] ? driver_register+0x90/0xf8 [] ? __pci_register_driver+0x4e/0xbe [] ? 0xffffffffa0260fff [] ? 0xffffffffa0260fff [] ? do_one_initcall+0x78/0x126 [] ? sys_init_module+0x97/0x1d3 [] ? system_call_fastpath+0x16/0x1b Code: 15 48 c7 c6 c0 29 23 a0 48 c7 c7 c9 4e 24 a0 31 c0 e8 80 09 16 e1 8b 83 2c 0b 00 00 89 c2 ff c0 48 c1 e2 02 48 03 93 20 0b 00 00 02 00 44 05 c0 23 83 4c 0b 00 00 ff 8b 38 0b 00 00 89 83 2c RIP [] evergreen_cp_resume+0x4b5/0xe05 [radeon] RSP CR2: ffffc90410981ffc ---[ end trace ae0e08994d728082 ]--- EXT3-fs (sda1): using internal journal EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (sda3): using internal journal EXT3-fs (sda3): mounted filesystem with ordered data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (sda5): using internal journal EXT3-fs (sda5): mounted filesystem with ordered data mode EXT2-fs (sda6): warning: mounting unchecked fs, running e2fsck is recommended r8169 0000:02:00.0: eth0: unable to apply firmware patch r8169 0000:02:00.0: eth0: link down Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k radeon: switched off BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] radeon_suspend_kms+0x77/0x1ed [radeon] PGD 156ff5067 PUD 157538067 PMD 0 Oops: 0000 [#2] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/firmware/0000:02:00.0/loading CPU 3 Modules linked in: radeon(+) i915 ttm drm_kms_helper intel_agp intel_gtt drm i2c_algo_bit r8169 cfbcopyarea wacom agpgart cfbimgblt cfbfillrect brcmsmac(C) Pid: 1917, comm: graphics.start Tainted: G D C 2.6.39-rc5 #14 Hewlett-Packard HP TouchSmart tm2 Notebook PC /1486 RIP: 0010:[] [] radeon_suspend_kms+0x77/0x1ed [radeon] RSP: 0018:ffff880156f3fe08 EFLAGS: 00010283 RAX: 000000000000001b RBX: ffff8801565ac000 RCX: 0000000000000000 RDX: 0000000000000e0e RSI: 0000000000000002 RDI: ffff880157658000 RBP: ffff880157658000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88015530afc0 R11: 0000000000000009 R12: fffffffffffffdb0 R13: ffff880157658408 R14: 00007fff38e45c2c R15: 0000000000000001 FS: 00007fedc9305700(0000) GS:ffff880157d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000015646c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process graphics.start (pid: 1917, threadinfo ffff880156f3e000, task ffff88015521f230) Stack: 0000000256f3fe18 ffff880155d18248 0000000000000000 ffff880157658000 00000000ffffffff 0000000000000004 ffff880157536540 00007fff38e45c2c 0000000000000001 ffffffffa01adc7b ffff8801552af400 ffffffff81626c68 Call Trace: [] ? radeon_switcheroo_set_state+0x7d/0x8b [radeon] [] ? vga_switchoff+0xc/0x2e [] ? vga_switcheroo_debugfs_write+0xcb/0x314 [] ? vfs_write+0xad/0x12e [] ? sys_write+0x45/0x6e [] ? system_call_fastpath+0x16/0x1b Code: 8d af 08 04 00 00 49 81 ec 50 02 00 00 eb 1c 4c 89 e7 be 03 00 00 00 e8 0c 59 f7 ff 4d 8b a4 24 50 02 00 00 49 81 ec 50 02 00 00 8b 84 24 50 02 00 00 0f 18 08 49 8d 84 24 50 02 00 00 49 39 RIP [] radeon_suspend_kms+0x77/0x1ed [radeon] RSP CR2: 0000000000000000 ---[ end trace ae0e08994d728083 ]--- wlan0: authenticate with 00:1c:4a:07:7f:76 (try 1) wlan0: authenticated wlan0: associate with 00:1c:4a:07:7f:76 (try 1) wlan0: RX AssocResp from 00:1c:4a:07:7f:76 (capab=0x431 status=0 aid=2) wlan0: associated