0x60000000-0xfcffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C223] (off) ACPI: Power Resource [C217] (on) ACPI: Power Resource [C34B] (off) ACPI: Power Resource [C34C] (off) ACPI: Power Resource [C34D] (off) ACPI: Power Resource [C34E] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [C074] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xfedfffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci 0000:00:00.0: [1002:5950] type 0 class 0x000600 pci 0000:00:01.0: [1002:5a3f] type 1 class 0x000604 pci 0000:00:04.0: [1002:5a36] type 1 class 0x000604 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: [1002:5a37] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: [1002:5a38] type 1 class 0x000604 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:12.0: [1002:4379] type 0 class 0x000101 pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x7018-0x701b] pci 0000:00:12.0: reg 20: [io 0x7020-0x702f] pci 0000:00:12.0: reg 24: [mem 0xd4409000-0xd44091ff] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:00:12.0: supports D1 D2 pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xd4401000-0xd4401fff] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xd4402000-0xd4402fff] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xd4403000-0xd4403fff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.0: reg 14: [mem 0xd4404000-0xd44043ff] pci 0000:00:14.0: SB4X0 revision 0x82 pci 0000:00:14.0: Force enabled HPET at 0xfed00000 pci 0000:00:14.1: [1002:4376] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x7040-0x704f] pci 0000:00:14.2: [1002:437b] type 0 class 0x000403 pci 0000:00:14.2: reg 10: [mem 0xd4408000-0xd440bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.3: [1002:4377] type 0 class 0x000601 pci 0000:00:14.4: [1002:4371] type 1 class 0x000604 pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:01:05.0: [1002:5975] type 0 class 0x000300 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff pref] pci 0000:01:05.0: reg 14: [io 0x6000-0x60ff] pci 0000:01:05.0: reg 18: [mem 0xd4300000-0xd430ffff] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd3ffffff] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:30:00.0: [14e4:4311] type 0 class 0x000280 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff] pci 0000:30:00.0: supports D1 D2 pci 0000:30:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:01.0: [14e4:169c] type 0 class 0x000200 pci 0000:02:01.0: reg 10: [mem 0xd4000000-0xd400ffff] pci 0000:02:01.0: PME# supported from D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:04.0: [104c:8039] type 2 class 0x000607 pci 0000:02:04.0: reg 10: [mem 0xd4010000-0xd4010fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:02:04.1: [104c:803a] type 0 class 0x000c00 pci 0000:02:04.1: reg 10: [mem 0xd4011000-0xd40117ff] pci 0000:02:04.1: reg 14: [mem 0xd4014000-0xd4017fff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot pci 0000:02:04.1: PME# disabled pci 0000:02:04.2: [104c:803b] type 0 class 0x000180 pci 0000:02:04.2: reg 10: [mem 0xd4018000-0xd4018fff] pci 0000:02:04.2: supports D1 D2 pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot pci 0000:02:04.2: PME# disabled pci 0000:02:04.3: [104c:803c] type 0 class 0x000805 pci 0000:02:04.3: reg 10: [mem 0xd4019000-0xd40190ff] pci 0000:02:04.3: supports D1 D2 pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot pci 0000:02:04.3: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd42fffff] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x60000000-0xfcffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) Unable to assume _OSC PCIe control. Disabling ASPM ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12C] (IRQs *10 11) vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd4408000-0xd440bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd4409000-0xd44091ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 0000000057fd0000 - 0000000057ffffff hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0x57ffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0x57ffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0x60000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: [io 0x0520-0x052f] pnp 00:02: [io 0x0530-0x053f] pnp 00:02: [mem 0xfed40000-0xfed44fff] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0118 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x051f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd4-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x051f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd4-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [io 0x8000-0x802f] pnp 00:0a: [io 0x8100-0x811f] pnp 00:0a: [mem 0xe0000000-0xefffffff] pnp 00:0a: [mem 0xfec00000-0xfec00fff] system 00:0a: [io 0x8000-0x802f] has been reserved system 00:0a: [io 0x8100-0x811f] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x000cf000-0x000cffff] pnp 00:0b: [mem 0x58000000-0x5fffffff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] system 00:0b: [mem 0x000cf000-0x000cffff] has been reserved system 00:0b: [mem 0x58000000-0x5fffffff] has been reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:14.4: BAR 9: assigned [mem 0x60000000-0x63ffffff pref] pci 0000:00:12.0: BAR 6: assigned [mem 0x64000000-0x6407ffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0x64080000-0x64083fff 64bit] pci 0000:00:14.2: BAR 0: set to [mem 0x64080000-0x64083fff 64bit] (PCI address [0x64080000-0x64083fff]) pci 0000:00:14.4: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:01:05.0: BAR 6: assigned [mem 0xd4320000-0xd433ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd3ffffff] pci 0000:00:04.0: bridge window [mem pref disabled] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:05.0: bridge window [mem pref disabled] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [io disabled] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:02:04.0: BAR 9: assigned [mem 0x60000000-0x63ffffff pref] pci 0000:02:04.0: BAR 10: assigned [mem 0x68000000-0x6bffffff] pci 0000:02:04.0: BAR 7: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 8: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0x60000000-0x63ffffff pref] pci 0000:02:04.0: bridge window [mem 0x68000000-0x6bffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd42fffff] pci 0000:00:14.4: bridge window [mem 0x60000000-0x63ffffff pref] pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x60000000-0xfcffffffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd43fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 0 [io 0x4000-0x5fff] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd3ffffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd4000000-0xd42fffff] pci_bus 0000:02: resource 2 [mem 0x60000000-0x63ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x60000000-0xfcffffffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0x60000000-0x63ffffff pref] pci_bus 0000:03: resource 3 [mem 0x68000000-0x6bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: MSI quirk detected; MSI disabled pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 fuse init (API version 7.16) msgmni has been set to 2755 NET: Registered protocol family 38 io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: setting latency timer to 64 pcieport 0000:00:05.0: setting latency timer to 64 pcieport 0000:00:06.0: setting latency timer to 64 ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [C1BD] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C25A] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C25B] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C34F] (off) ACPI: Fan [C350] (off) ACPI: Fan [C351] (off) ACPI: Fan [C352] (off) ACPI: acpi_idle registered with cpuidle ACPI: processor limited to max C-state 1 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (67 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (55 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (30 C) Real Time Clock Driver v1.12b Linux agpgart interface v0.103 brd: module loaded loop: module loaded sata_sil 0000:00:12.0: version 2.4 sata_sil 0000:00:12.0: quirky BIOS, skipping spindown on poweroff and hibernation sata_sil 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16 ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi2 : pata_atiixp scsi3 : pata_atiixp ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7040 irq 14 ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 (2 cpu cores) (version 2.20.00) powernow-k8: fid 0xa (1800 MHz), vid 0x13 powernow-k8: fid 0x8 (1600 MHz), vid 0x15 powernow-k8: fid 0x0 (800 MHz), vid 0x1e input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [C1BF] (battery present) ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [C1BE] (battery absent) ata3.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2 ata3.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHV2080BH PL, 892C, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 ata2: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg1 type 5 registered taskstats version 1 REISERFS (device sda2): found reiserfs format "3.6" with standard journal REISERFS (device sda2): using ordered data mode REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda2): checking transaction log (sda2) REISERFS (device sda2): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:2. Freeing unused kernel memory: 444k freed udevd[800]: starting version 168 wmi: Mapper loaded ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.39-rc7 ehci_hcd usb usb1: SerialNumber: 0000:00:13.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.39-rc7 ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.39-rc7 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30b0] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions yenta_cardbus 0000:02:04.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:04.0: TI: mfunc 0x01a11002, devctl 0x64 b43-pci-bridge 0000:30:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 b43-pci-bridge 0000:30:00.0: setting latency timer to 64 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0 yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cf8, PCI irq 20 yenta_cardbus 0000:02:04.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x1000-0x1fff] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd42fffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd42fffff: excluding 0xd4000000-0xd402ffff yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff: excluding 0x60000000-0x63ffffff tifm_7xx1 0000:02:04.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 tg3.c:v3.117 (January 25, 2011) tg3 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 tg3 0000:02:01.0: eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:17:08:36:6b:d7 tg3 0000:02:01.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0]) tg3 0000:02:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:02:01.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit] input: HP WMI hotkeys as /devices/virtual/input/input5 cfg80211: Calling CRDA to update world regulatory domain usb 3-1: new full speed USB device number 2 using ohci_hcd udevd[809]: renamed network interface eth0 to eth2 usb 3-1: New USB device found, idVendor=08ff, idProduct=2580 usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: Product: Fingerprint Sensor [drm] Initialized drm 1.1.0 20060810 b43-phy0: Broadcom 4311 WLAN found (core revision 10) HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda-intel: chipset global capabilities = 0x4401 b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 hda-intel: codec_mask = 0x3 hda-intel: codec #0 probed OK hda-intel: codec #1 probed OK b43-phy0 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config hda_codec: model 'hp' is selected for config 30b0:103c (HP nx6320) hda-codec: No codec parser is available ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Broadcom 43xx driver loaded [ Features: P, Firmware-ID: FW13 ] [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [drm] initializing kernel modesetting (RS480 0x1002:0x5975). [drm] register mmio base: 0xD4300000 [drm] register mmio size: 65536 [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:05.0: VRAM: 128M 0x0000000058000000 - 0x000000005FFFFFFF (128M used) radeon 0000:01:05.0: GTT: 512M 0x0000000060000000 - 0x000000007FFFFFFF [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 705708 kiB. [TTM] Initializing pool allocator. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: 2 quad pipes, 1 z pipes initialized. radeon 0000:01:05.0: WB enabled [drm] Loading R300 Microcode [drm] radeon: ring at 0x0000000060001000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Panel ID String: QDS [drm] Panel Size 1024x768 [drm] radeon legacy LVDS backlight initialized [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [drm] Encoders: [drm] CRT1: INTERNAL_DAC2 [drm] Connector 1: [drm] LVDS [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [drm] Encoders: [drm] LCD1: INTERNAL_LVDS [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] radeon: power management initialized [drm] fb mappable at 0xC0040000 [drm] vram apper at 0xC0000000 [drm] size 3145728 [drm] fb depth is 24 [drm] pitch is 4096 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 128x48 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.9.0 20080528 for 0000:01:05.0 on minor 0 REISERFS (device sda3): found reiserfs format "3.6" with standard journal REISERFS (device sda3): using ordered data mode REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda3): checking transaction log (sda3) REISERFS (device sda3): Using r5 hash to sort names b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) b43-phy0 debug: Chip initialized b43-phy0 debug: 32-bit DMA initialized b43-phy0 debug: QoS enabled b43-phy0 debug: Wireless interface started b43-phy0 debug: Adding Interface type 2 Adding 1004024k swap on /dev/sda1. Priority:-1 extents:1 across:1004024k wlan0: authenticate with 00:11:f5:de:7b:27 (try 1) wlan0: authenticate with 00:11:f5:de:7b:27 (try 2) wlan0: authenticate with 00:11:f5:de:7b:27 (try 3) wlan0: authentication with 00:11:f5:de:7b:27 timed out ata1.00: configured for UDMA/100 ata1: EH complete wlan0: direct probe to 00:11:f5:de:7b:27 (try 1/3) wlan0: direct probe to 00:11:f5:de:7b:27 (try 2/3) wlan0: direct probe to 00:11:f5:de:7b:27 (try 3/3) wlan0: direct probe to 00:11:f5:de:7b:27 timed out CE: hpet increased min_delta_ns to 20113 nsec hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31 hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 hda_codec_cleanup_stream: NID=0x3 hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31 hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 hda_codec_cleanup_stream: NID=0x3 wlan0: authenticate with 00:23:69:b5:ac:e1 (try 1) wlan0: authenticated wlan0: associate with 00:23:69:b5:ac:e1 (try 1) wlan0: RX AssocResp from 00:23:69:b5:ac:e1 (capab=0x431 status=0 aid=3) wlan0: associated b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:23:69:b5:ac:e1 b43-phy0 debug: Using hardware based encryption for keyidx: 1, mac: ff:ff:ff:ff:ff:ff CE: hpet increased min_delta_ns to 30169 nsec CE: hpet increased min_delta_ns to 45253 nsec CE: hpet increased min_delta_ns to 67879 nsec hrtimer: interrupt took 2984669 ns hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31 hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 hda_codec_cleanup_stream: NID=0x3 hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31 hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 hda_codec_cleanup_stream: NID=0x3 CE: hpet increased min_delta_ns to 101818 nsec