[ 176.223] X.Org X Server 1.10.3 Release Date: 2011-07-08 [ 176.225] X Protocol Version 11, Revision 0 [ 176.225] Build Operating System: Linux 3.0.0-git4 x86_64 [ 176.225] Current Operating System: Linux vortex 3.0.0-git4 #1 SMP Mon Jul 25 16:42:34 CEST 2011 x86_64 [ 176.226] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-git4 root=/dev/mapper/luks-5e973de6-86f3-4e42-a6c9-915c9de55abf audit=1 selinux=1 enforcing=1 pcie_aspm=off ro quiet [ 176.226] Build Date: 26 July 2011 07:01:41AM [ 176.226] [ 176.226] Current version of pixman: 0.23.2 [ 176.226] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 176.226] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 176.226] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 26 07:11:42 2011 [ 176.267] (==) Using config file: "/etc/X11/xorg.conf" [ 176.267] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 176.267] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 176.314] (==) ServerLayout "Layout0" [ 176.314] (**) |-->Screen "Screen0" (0) [ 176.314] (**) | |-->Monitor "Monitor0" [ 176.314] (**) | |-->Device "Device0" [ 176.314] (**) |-->Input Device "Keyboard0" [ 176.314] (**) Option "AIGLX" "off" [ 176.314] (==) Automatically adding devices [ 176.314] (==) Automatically enabling devices [ 176.366] (**) FontPath set to: /usr/share/fonts/default/Type1, catalogue:/etc/X11/fontpath.d [ 176.366] (**) ModulePath set to "/usr/lib64/xorg/modules/extensions,/usr/lib64/xorg/modules/drivers,/usr/lib64/xorg/modules" [ 176.366] (**) Extension "RANDR" is enabled [ 176.366] (**) Extension "RENDER" is enabled [ 176.366] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 176.366] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 176.366] (WW) Disabling Keyboard0 [ 176.366] (II) Loader magic: 0x800520 [ 176.366] (II) Module ABI versions: [ 176.366] X.Org ANSI C Emulation: 0.4 [ 176.366] X.Org Video Driver: 10.0 [ 176.366] X.Org XInput driver : 12.2 [ 176.366] X.Org Server Extension : 5.0 [ 176.367] (--) PCI:*(0:1:0:0) 10de:0a29:1025:035a rev 162, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288 [ 176.375] (II) Open ACPI successful (/var/run/acpid.socket) [ 176.375] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. [ 176.375] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. [ 176.375] (II) "glx" will be loaded by default. [ 176.375] (II) "record" will be loaded by default. [ 176.375] (II) "dri" will be loaded. This was enabled by default and also specified in the config file. [ 176.375] (II) "dri2" will be loaded by default. [ 176.375] (II) LoadModule: "dri" [ 176.421] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 176.443] (II) Module dri: vendor="X.Org Foundation" [ 176.443] compiled for 1.10.3, module version = 1.0.0 [ 176.443] ABI class: X.Org Server Extension, version 5.0 [ 176.443] (II) Loading extension XFree86-DRI [ 176.443] (II) LoadModule: "extmod" [ 176.443] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 176.461] (II) Module extmod: vendor="X.Org Foundation" [ 176.461] compiled for 1.10.3, module version = 1.0.0 [ 176.461] Module class: X.Org Server Extension [ 176.461] ABI class: X.Org Server Extension, version 5.0 [ 176.461] (II) Loading extension SELinux [ 176.461] (II) Loading extension MIT-SCREEN-SAVER [ 176.461] (II) Loading extension XFree86-VidModeExtension [ 176.461] (II) Loading extension XFree86-DGA [ 176.461] (II) Loading extension DPMS [ 176.461] (II) Loading extension XVideo [ 176.461] (II) Loading extension XVideo-MotionCompensation [ 176.461] (II) Loading extension X-Resource [ 176.461] (II) LoadModule: "dbe" [ 176.461] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 176.470] (II) Module dbe: vendor="X.Org Foundation" [ 176.470] compiled for 1.10.3, module version = 1.0.0 [ 176.470] Module class: X.Org Server Extension [ 176.470] ABI class: X.Org Server Extension, version 5.0 [ 176.470] (II) Loading extension DOUBLE-BUFFER [ 176.470] (II) LoadModule: "glx" [ 176.470] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 176.494] (II) Module glx: vendor="X.Org Foundation" [ 176.494] compiled for 1.10.3, module version = 1.0.0 [ 176.494] ABI class: X.Org Server Extension, version 5.0 [ 176.494] (**) AIGLX disabled [ 176.494] (II) Loading extension GLX [ 176.495] (II) LoadModule: "record" [ 176.495] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 176.497] (II) Module record: vendor="X.Org Foundation" [ 176.497] compiled for 1.10.3, module version = 1.13.0 [ 176.497] Module class: X.Org Server Extension [ 176.497] ABI class: X.Org Server Extension, version 5.0 [ 176.497] (II) Loading extension RECORD [ 176.497] (II) LoadModule: "dri2" [ 176.497] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 176.503] (II) Module dri2: vendor="X.Org Foundation" [ 176.503] compiled for 1.10.3, module version = 1.2.0 [ 176.503] ABI class: X.Org Server Extension, version 5.0 [ 176.503] (II) Loading extension DRI2 [ 176.503] (II) LoadModule: "nouveau" [ 176.543] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [ 176.568] (II) Module nouveau: vendor="X.Org Foundation" [ 176.568] compiled for 1.10.3, module version = 0.0.16 [ 176.568] Module class: X.Org Video Driver [ 176.568] ABI class: X.Org Video Driver, version 10.0 [ 176.568] (II) NOUVEAU driver [ 176.568] (II) NOUVEAU driver for NVIDIA chipset families : [ 176.568] RIVA TNT (NV04) [ 176.568] RIVA TNT2 (NV05) [ 176.568] GeForce 256 (NV10) [ 176.568] GeForce 2 (NV11, NV15) [ 176.569] GeForce 4MX (NV17, NV18) [ 176.569] GeForce 3 (NV20) [ 176.569] GeForce 4Ti (NV25, NV28) [ 176.569] GeForce FX (NV3x) [ 176.569] GeForce 6 (NV4x) [ 176.569] GeForce 7 (G7x) [ 176.569] GeForce 8 (G8x) [ 176.569] GeForce GTX 200 (NVA0) [ 176.569] GeForce GTX 400 (NVC0) [ 176.570] (--) using VT number 7 [ 176.584] drmOpenDevice: node name is /dev/dri/card0 [ 176.584] drmOpenDevice: open result is 8, (OK) [ 176.584] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 176.584] drmOpenDevice: node name is /dev/dri/card0 [ 176.584] drmOpenDevice: open result is 8, (OK) [ 176.584] drmOpenByBusid: drmOpenMinor returns 8 [ 176.584] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 176.585] (II) [drm] nouveau interface version: 0.0.16 [ 176.585] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [ 176.585] (II) Loading sub module "dri" [ 176.585] (II) LoadModule: "dri" [ 176.585] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 176.585] (II) Module dri: vendor="X.Org Foundation" [ 176.585] compiled for 1.10.3, module version = 1.0.0 [ 176.585] ABI class: X.Org Server Extension, version 5.0 [ 176.585] (II) NOUVEAU(0): Loaded DRI module [ 176.585] drmOpenDevice: node name is /dev/dri/card0 [ 176.585] drmOpenDevice: open result is 9, (OK) [ 176.585] drmOpenDevice: node name is /dev/dri/card0 [ 176.585] drmOpenDevice: open result is 9, (OK) [ 176.585] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 176.585] drmOpenDevice: node name is /dev/dri/card0 [ 176.585] drmOpenDevice: open result is 9, (OK) [ 176.585] drmOpenByBusid: drmOpenMinor returns 9 [ 176.586] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 176.586] (II) [drm] DRM interface version 1.4 [ 176.586] (II) [drm] DRM open master succeeded. [ 176.586] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5" [ 176.586] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 176.586] (==) NOUVEAU(0): RGB weight 888 [ 176.586] (==) NOUVEAU(0): Default visual is TrueColor [ 176.586] (==) NOUVEAU(0): Using HW cursor [ 176.586] (==) NOUVEAU(0): GLX sync to VBlank disabled. [ 176.586] (==) NOUVEAU(0): Page flipping enabled [ 176.728] (II) NOUVEAU(0): Output LVDS-1 using monitor section Monitor0 [ 176.825] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 176.833] (II) NOUVEAU(0): Output HDMI-1 has no monitor section [ 176.937] (II) NOUVEAU(0): EDID for output LVDS-1 [ 176.937] (II) NOUVEAU(0): Manufacturer: LGD Model: 210 Serial#: 0 [ 176.937] (II) NOUVEAU(0): Year: 2009 Week: 0 [ 176.937] (II) NOUVEAU(0): EDID Version: 1.3 [ 176.937] (II) NOUVEAU(0): Digital Display Input [ 176.937] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 35 vert.: 19 [ 176.937] (II) NOUVEAU(0): Gamma: 2.20 [ 176.937] (II) NOUVEAU(0): No DPMS capabilities specified [ 176.937] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 176.937] (II) NOUVEAU(0): First detailed timing is preferred mode [ 176.937] (II) NOUVEAU(0): redX: 0.590 redY: 0.350 greenX: 0.330 greenY: 0.555 [ 176.937] (II) NOUVEAU(0): blueX: 0.153 blueY: 0.119 whiteX: 0.313 whiteY: 0.329 [ 176.937] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 176.937] (II) NOUVEAU(0): Supported detailed timing: [ 176.937] (II) NOUVEAU(0): clock: 75.1 MHz Image Size: 345 x 194 mm [ 176.937] (II) NOUVEAU(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1564 h_border: 0 [ 176.937] (II) NOUVEAU(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 800 v_border: 0 [ 176.937] (II) NOUVEAU(0): LG Display [ 176.937] (II) NOUVEAU(0): Monitor name: LP156WH3-TLA2 [ 176.937] (II) NOUVEAU(0): EDID (in hex): [ 176.937] (II) NOUVEAU(0): 00ffffffffffff0030e4100200000000 [ 176.937] (II) NOUVEAU(0): 00130103802313780a28659759548e27 [ 176.937] (II) NOUVEAU(0): 1e505400000001010101010101010101 [ 176.937] (II) NOUVEAU(0): 010101010101561d56c6500020303020 [ 176.937] (II) NOUVEAU(0): 350059c2100000190000000000000000 [ 176.937] (II) NOUVEAU(0): 00000000000000000000000000fe004c [ 176.937] (II) NOUVEAU(0): 4720446973706c61790a2020000000fc [ 176.937] (II) NOUVEAU(0): 004c503135365748332d544c4132002a [ 176.937] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 176.937] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 176.937] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 176.937] (II) NOUVEAU(0): Not using mode "640x480" (vrefresh out of range) [ 176.937] (II) NOUVEAU(0): Not using mode "720x400" (hsync out of range) [ 176.937] (II) NOUVEAU(0): Not using mode "640x400" (hsync out of range) [ 176.937] (II) NOUVEAU(0): Not using mode "640x350" (hsync out of range) [ 176.937] (II) NOUVEAU(0): Printing probed modes for output LVDS-1 [ 176.937] (II) NOUVEAU(0): Modeline "1366x768"x60.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 176.937] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 176.937] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 177.034] (II) NOUVEAU(0): EDID for output VGA-1 [ 177.042] (II) NOUVEAU(0): EDID for output HDMI-1 [ 177.042] (II) NOUVEAU(0): Output LVDS-1 connected [ 177.042] (II) NOUVEAU(0): Output VGA-1 disconnected [ 177.042] (II) NOUVEAU(0): Output HDMI-1 disconnected [ 177.042] (II) NOUVEAU(0): Using user preference for initial modes [ 177.042] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768 [ 177.042] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 177.042] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 0) [ 177.042] (**) NOUVEAU(0): Driver mode "1366x768": 75.1 MHz (scaled from 0.0 MHz), 48.0 kHz, 60.0 Hz [ 177.042] (II) NOUVEAU(0): Modeline "1366x768"x60.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 177.042] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz [ 177.042] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 177.042] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz [ 177.042] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 177.042] (**) NOUVEAU(0): Display dimensions: (350, 190) mm [ 177.042] (**) NOUVEAU(0): DPI set to (99, 102) [ 177.042] (II) Loading sub module "fb" [ 177.042] (II) LoadModule: "fb" [ 177.065] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 177.078] (II) Module fb: vendor="X.Org Foundation" [ 177.078] compiled for 1.10.3, module version = 1.0.0 [ 177.078] ABI class: X.Org ANSI C Emulation, version 0.4 [ 177.078] (II) Loading sub module "exa" [ 177.078] (II) LoadModule: "exa" [ 177.078] (II) Loading /usr/lib64/xorg/modules/libexa.so [ 177.092] (II) Module exa: vendor="X.Org Foundation" [ 177.092] compiled for 1.10.3, module version = 2.5.0 [ 177.092] ABI class: X.Org Video Driver, version 10.0 [ 177.092] (II) Loading sub module "shadowfb" [ 177.092] (II) LoadModule: "shadowfb" [ 177.093] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so [ 177.098] (II) Module shadowfb: vendor="X.Org Foundation" [ 177.098] compiled for 1.10.3, module version = 1.0.0 [ 177.098] ABI class: X.Org ANSI C Emulation, version 0.4 [ 177.098] (--) Depth 24 pixmap format is 32 bpp [ 177.115] (II) NOUVEAU(0): Opened GPU channel 2 [ 177.115] (II) NOUVEAU(0): [DRI2] Setup complete [ 177.115] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 177.118] (II) NOUVEAU(0): GART: 512MiB available [ 177.120] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer [ 177.147] (II) EXA(0): Driver allocated offscreen pixmaps [ 177.147] (II) EXA(0): Driver registered support for the following operations: [ 177.147] (II) Solid [ 177.147] (II) Copy [ 177.147] (II) Composite (RENDER acceleration) [ 177.147] (II) UploadToScreen [ 177.147] (II) DownloadFromScreen [ 177.147] (==) NOUVEAU(0): Backing store disabled [ 177.147] (==) NOUVEAU(0): Silken mouse enabled [ 177.149] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 177.149] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 177.149] (**) NOUVEAU(0): DPMS enabled [ 177.149] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 177.150] (WW) NOUVEAU(0): Option "ConnectedMonitor" is not used [ 177.150] (WW) NOUVEAU(0): Option "CustomEDID" is not used [ 177.150] (WW) NOUVEAU(0): Option "NoLogo" is not used [ 177.154] (--) RandR disabled [ 177.154] (II) Initializing built-in extension Generic Event Extension [ 177.154] (II) Initializing built-in extension SHAPE [ 177.154] (II) Initializing built-in extension MIT-SHM [ 177.154] (II) Initializing built-in extension XInputExtension [ 177.154] (II) Initializing built-in extension XTEST [ 177.154] (II) Initializing built-in extension BIG-REQUESTS [ 177.154] (II) Initializing built-in extension SYNC [ 177.154] (II) Initializing built-in extension XKEYBOARD [ 177.154] (II) Initializing built-in extension XC-MISC [ 177.154] (II) Initializing built-in extension SECURITY [ 177.154] (II) Initializing built-in extension XINERAMA [ 177.154] (II) Initializing built-in extension XFIXES [ 177.154] (II) Initializing built-in extension RENDER [ 177.154] (II) Initializing built-in extension RANDR [ 177.154] (II) Initializing built-in extension COMPOSITE [ 177.154] (II) Initializing built-in extension DAMAGE [ 177.159] (II) SELinux: Disabled by boolean [ 177.426] (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so [ 177.426] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 177.427] (II) NOUVEAU(0): NVEnterVT is called. [ 177.429] (II) NOUVEAU(0): Setting screen physical size to 361 x 203 [ 177.429] resize called 1366 768 [ 177.817] (II) XKB: Reusing cached keymap [ 177.838] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 177.838] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 177.838] (**) Power Button: Applying InputClass "system-setup-keyboard" [ 177.838] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 177.838] (II) LoadModule: "evdev" [ 177.853] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 177.866] (II) Module evdev: vendor="X.Org Foundation" [ 177.866] compiled for 1.10.3, module version = 2.6.0 [ 177.866] Module class: X.Org XInput Driver [ 177.866] ABI class: X.Org XInput driver, version 12.2 [ 177.866] (II) Using input driver 'evdev' for 'Power Button' [ 177.866] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 177.866] Option "XkbRules" "evdev" [ 177.866] Option "XkbModel" "pc105" [ 177.866] Option "XkbLayout" "it" [ 177.866] Option "_source" "server/udev" [ 177.866] Option "name" "Power Button" [ 177.866] Option "path" "/dev/input/event3" [ 177.866] Option "device" "/dev/input/event3" [ 177.866] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 177.866] Option "driver" "evdev" [ 177.866] Option "XkbOptions" "terminate:ctrl_alt_bksp," [ 177.866] (**) Power Button: always reports core events [ 177.866] (**) Power Button: Device: "/dev/input/event3" [ 177.866] (--) Power Button: Found keys [ 177.866] (II) Power Button: Configuring as keyboard [ 177.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 177.866] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 177.866] (**) Option "xkb_rules" "evdev" [ 177.866] (**) Option "xkb_model" "pc105" [ 177.866] (**) Option "xkb_layout" "it" [ 177.866] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 177.898] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 177.898] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 177.898] (**) Power Button: Applying InputClass "system-setup-keyboard" [ 177.898] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 177.898] (II) Using input driver 'evdev' for 'Power Button' [ 177.898] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 177.898] Option "XkbRules" "evdev" [ 177.898] Option "XkbModel" "pc105" [ 177.898] Option "XkbLayout" "it" [ 177.898] Option "_source" "server/udev" [ 177.898] Option "name" "Power Button" [ 177.898] Option "path" "/dev/input/event0" [ 177.898] Option "device" "/dev/input/event0" [ 177.898] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0/event0" [ 177.898] Option "driver" "evdev" [ 177.898] Option "XkbOptions" "terminate:ctrl_alt_bksp," [ 177.898] (**) Power Button: always reports core events [ 177.898] (**) Power Button: Device: "/dev/input/event0" [ 177.898] (--) Power Button: Found keys [ 177.898] (II) Power Button: Configuring as keyboard [ 177.898] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0/event0" [ 177.898] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 177.898] (**) Option "xkb_rules" "evdev" [ 177.898] (**) Option "xkb_model" "pc105" [ 177.898] (**) Option "xkb_layout" "it" [ 177.898] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 177.898] (II) XKB: Reusing cached keymap [ 177.899] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 177.899] (II) No input driver/identifier specified (ignoring) [ 177.899] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 177.899] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 177.899] (**) Sleep Button: Applying InputClass "system-setup-keyboard" [ 177.899] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 177.899] (II) Using input driver 'evdev' for 'Sleep Button' [ 177.899] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 177.899] Option "XkbRules" "evdev" [ 177.899] Option "XkbModel" "pc105" [ 177.899] Option "XkbLayout" "it" [ 177.899] Option "_source" "server/udev" [ 177.899] Option "name" "Sleep Button" [ 177.899] Option "path" "/dev/input/event2" [ 177.899] Option "device" "/dev/input/event2" [ 177.899] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input2/event2" [ 177.899] Option "driver" "evdev" [ 177.899] Option "XkbOptions" "terminate:ctrl_alt_bksp," [ 177.899] (**) Sleep Button: always reports core events [ 177.899] (**) Sleep Button: Device: "/dev/input/event2" [ 177.899] (--) Sleep Button: Found keys [ 177.899] (II) Sleep Button: Configuring as keyboard [ 177.899] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input2/event2" [ 177.899] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 177.899] (**) Option "xkb_rules" "evdev" [ 177.899] (**) Option "xkb_model" "pc105" [ 177.899] (**) Option "xkb_layout" "it" [ 177.899] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 177.899] (II) XKB: Reusing cached keymap [ 177.900] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 177.900] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 177.900] (**) Video Bus: Applying InputClass "system-setup-keyboard" [ 177.900] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 177.900] (II) Using input driver 'evdev' for 'Video Bus' [ 177.900] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 177.900] Option "XkbRules" "evdev" [ 177.900] Option "XkbModel" "pc105" [ 177.900] Option "XkbLayout" "it" [ 177.900] Option "_source" "server/udev" [ 177.900] Option "name" "Video Bus" [ 177.900] Option "path" "/dev/input/event5" [ 177.900] Option "device" "/dev/input/event5" [ 177.900] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input5/event5" [ 177.900] Option "driver" "evdev" [ 177.900] Option "XkbOptions" "terminate:ctrl_alt_bksp," [ 177.900] (**) Video Bus: always reports core events [ 177.900] (**) Video Bus: Device: "/dev/input/event5" [ 177.900] (--) Video Bus: Found keys [ 177.900] (II) Video Bus: Configuring as keyboard [ 177.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input5/event5" [ 177.900] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 177.900] (**) Option "xkb_rules" "evdev" [ 177.900] (**) Option "xkb_model" "pc105" [ 177.900] (**) Option "xkb_layout" "it" [ 177.900] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 177.900] (II) XKB: Reusing cached keymap [ 177.903] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event12) [ 177.903] (II) No input driver/identifier specified (ignoring) [ 177.903] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event13) [ 177.903] (II) No input driver/identifier specified (ignoring) [ 177.904] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event14) [ 177.904] (II) No input driver/identifier specified (ignoring) [ 177.904] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event15) [ 177.904] (II) No input driver/identifier specified (ignoring) [ 177.905] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event8) [ 177.905] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall" [ 177.905] (**) 1.3M WebCam: Applying InputClass "system-setup-keyboard" [ 177.905] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall" [ 177.905] (II) Using input driver 'evdev' for '1.3M WebCam' [ 177.905] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 177.905] Option "XkbRules" "evdev" [ 177.905] Option "XkbModel" "pc105" [ 177.905] Option "XkbLayout" "it" [ 177.905] Option "_source" "server/udev" [ 177.905] Option "name" "1.3M WebCam" [ 177.905] Option "path" "/dev/input/event8" [ 177.905] Option "device" "/dev/input/event8" [ 177.905] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8/event8" [ 177.905] Option "driver" "evdev" [ 177.905] Option "XkbOptions" "terminate:ctrl_alt_bksp," [ 177.905] (**) 1.3M WebCam: always reports core events [ 177.905] (**) 1.3M WebCam: Device: "/dev/input/event8" [ 177.905] (--) 1.3M WebCam: Found keys [ 177.905] (II) 1.3M WebCam: Configuring as keyboard [ 177.905] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8/event8" [ 177.905] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD) [ 177.905] (**) Option "xkb_rules" "evdev" [ 177.905] (**) Option "xkb_model" "pc105" [ 177.905] (**) Option "xkb_layout" "it" [ 177.905] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 177.905] (II) XKB: Reusing cached keymap [ 177.906] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10) [ 177.906] (II) No input driver/identifier specified (ignoring) [ 177.906] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11) [ 177.906] (II) No input driver/identifier specified (ignoring) [ 177.910] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 177.910] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 177.910] (**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard" [ 177.910] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 177.910] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 177.910] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 177.910] Option "XkbRules" "evdev" [ 177.910] Option "XkbModel" "pc105" [ 177.910] Option "XkbLayout" "it" [ 177.910] Option "_source" "server/udev" [ 177.910] Option "name" "AT Translated Set 2 keyboard" [ 177.910] Option "path" "/dev/input/event4" [ 177.910] Option "device" "/dev/input/event4" [ 177.910] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 177.910] Option "driver" "evdev" [ 177.910] Option "XkbOptions" "terminate:ctrl_alt_bksp," [ 177.910] (**) AT Translated Set 2 keyboard: always reports core events [ 177.910] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 177.910] (--) AT Translated Set 2 keyboard: Found keys [ 177.910] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 177.910] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 177.910] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 177.910] (**) Option "xkb_rules" "evdev" [ 177.910] (**) Option "xkb_model" "pc105" [ 177.910] (**) Option "xkb_layout" "it" [ 177.910] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 177.910] (II) XKB: Reusing cached keymap [ 177.910] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 177.910] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 177.910] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 177.910] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 177.910] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 177.910] (II) LoadModule: "synaptics" [ 177.911] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 177.923] (II) Module synaptics: vendor="X.Org Foundation" [ 177.923] compiled for 1.10.3, module version = 1.4.1 [ 177.923] Module class: X.Org XInput Driver [ 177.923] ABI class: X.Org XInput driver, version 12.2 [ 177.923] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 177.923] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 177.923] Option "_source" "server/udev" [ 177.923] Option "name" "SynPS/2 Synaptics TouchPad" [ 177.923] Option "path" "/dev/input/event6" [ 177.923] Option "device" "/dev/input/event6" [ 177.923] Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input6/event6" [ 177.923] Option "driver" "synaptics" [ 177.923] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 177.923] (**) Option "Device" "/dev/input/event6" [ 177.924] (**) Option "Device" "/dev/input/event6" [ 177.924] port opened successfully [ 177.950] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5682 [ 177.950] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4692 [ 177.950] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 177.950] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 177.950] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons [ 177.982] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 177.982] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 178.014] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input6/event6" [ 178.014] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 178.014] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 178.014] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 178.014] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037 [ 178.014] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 178.014] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 178.014] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 178.014] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 178.014] (**) Option "Device" "/dev/input/event6" [ 178.014] (**) Option "Device" "/dev/input/event6" [ 178.014] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 178.014] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 178.014] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 178.014] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 178.014] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 178.014] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 178.014] Option "_source" "server/udev" [ 178.014] Option "name" "SynPS/2 Synaptics TouchPad" [ 178.014] Option "path" "/dev/input/mouse0" [ 178.014] Option "device" "/dev/input/mouse0" [ 178.014] Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input6/mouse0" [ 178.014] Option "driver" "synaptics" [ 178.014] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 178.014] (**) Option "Device" "/dev/input/mouse0" [ 178.014] (**) Option "Device" "/dev/input/mouse0" [ 178.014] port opened successfully [ 178.014] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting to 1615 - 5685 [ 178.014] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting to 1729 - 4171 [ 178.014] (--) SynPS/2 Synaptics TouchPad: invalid pressure range. defaulting to 0 - 256 [ 178.014] (--) SynPS/2 Synaptics TouchPad: invalid finger width range. defaulting to 0 - 16 [ 178.035] (EE) Query no Synaptics: 6003C8 [ 178.035] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found [ 178.035] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware. [ 178.047] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad" [ 178.047] (II) UnloadModule: "synaptics" [ 178.047] (II) Unloading synaptics [ 178.047] (II) config/udev: Adding input device PC Speaker (/dev/input/event7) [ 178.047] (II) No input driver/identifier specified (ignoring) [ 178.050] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event9) [ 178.050] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 178.050] (**) Acer WMI hotkeys: Applying InputClass "system-setup-keyboard" [ 178.050] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 178.050] (II) Using input driver 'evdev' for 'Acer WMI hotkeys' [ 178.050] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 178.050] Option "XkbRules" "evdev" [ 178.050] Option "XkbModel" "pc105" [ 178.050] Option "XkbLayout" "it" [ 178.050] Option "_source" "server/udev" [ 178.050] Option "name" "Acer WMI hotkeys" [ 178.050] Option "path" "/dev/input/event9" [ 178.050] Option "device" "/dev/input/event9" [ 178.050] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9" [ 178.050] Option "driver" "evdev" [ 178.050] Option "XkbOptions" "terminate:ctrl_alt_bksp," [ 178.050] (**) Acer WMI hotkeys: always reports core events [ 178.050] (**) Acer WMI hotkeys: Device: "/dev/input/event9" [ 178.050] (--) Acer WMI hotkeys: Found keys [ 178.050] (II) Acer WMI hotkeys: Configuring as keyboard [ 178.050] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9" [ 178.050] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD) [ 178.050] (**) Option "xkb_rules" "evdev" [ 178.050] (**) Option "xkb_model" "pc105" [ 178.050] (**) Option "xkb_layout" "it" [ 178.050] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 178.050] (II) XKB: Reusing cached keymap [ 178.203] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 178.204] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 178.204] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 182.623] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 182.623] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 182.623] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 184.428] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 184.428] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 184.428] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 185.619] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 185.619] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 185.619] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 185.945] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 185.945] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 185.945] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 186.270] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 186.270] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 186.270] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 186.595] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 186.595] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 186.595] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 187.606] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 187.606] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 187.606] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 198.426] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 198.428] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 198.428] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 198.784] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 198.784] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 198.784] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 199.112] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 199.112] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 199.112] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 199.439] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 199.439] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 199.439] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 199.754] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 199.754] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 199.754] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 200.067] (II) NOUVEAU(0): EDID vendor "LGD", prod id 528 [ 200.067] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 200.067] (II) NOUVEAU(0): Modeline "1366x768"x0.0 75.10 1366 1414 1446 1564 768 771 776 800 -hsync -vsync (48.0 kHz) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-git4 (root@vortex) (gcc version 4.6.1 (GCC) ) #1 SMP Mon Jul 25 16:42:34 CEST 2011 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-git4 root=/dev/mapper/luks-5e973de6-86f3-4e42-a6c9-915c9de55abf audit=1 selinux=1 enforcing=1 pcie_aspm=off ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000009f675000 (usable) [ 0.000000] BIOS-e820: 000000009f675000 - 000000009f6bf000 (reserved) [ 0.000000] BIOS-e820: 000000009f6bf000 - 000000009f74c000 (usable) [ 0.000000] BIOS-e820: 000000009f74c000 - 000000009f7bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009f7bf000 - 000000009f7e3000 (usable) [ 0.000000] BIOS-e820: 000000009f7e3000 - 000000009f7ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000009f7ff000 - 000000009f800000 (usable) [ 0.000000] BIOS-e820: 000000009f800000 - 00000000a0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000158000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Acer Aspire 5745G/JV51_CP, BIOS V1.19 22/03/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x158000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-combining [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 2 base 080000000 mask FE0000000 write-back [ 0.000000] 3 base 09F800000 mask FFF800000 uncachable [ 0.000000] 4 base 100000000 mask F80000000 write-back [ 0.000000] 5 base 158000000 mask FF8000000 uncachable [ 0.000000] 6 base 160000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x9f800 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000009f800000 [ 0.000000] 0000000000 - 009f800000 page 2M [ 0.000000] kernel direct mapping tables up to 9f800000 @ 9f7df000-9f7e3000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000158000000 [ 0.000000] 0100000000 - 0158000000 page 2M [ 0.000000] kernel direct mapping tables up to 158000000 @ 157ff9000-158000000 [ 0.000000] RAMDISK: 34814000 - 36402000 [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 000000009f7fe120 00074 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 000000009f7fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: DSDT 000000009f7ed000 0B23F (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: FACS 000000009f75f000 00040 [ 0.000000] ACPI: ASF! 000000009f7fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: HPET 000000009f7fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 000000009f7fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 000000009f7f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SLIC 000000009f7ec000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 000000009f7e9000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: ASPT 000000009f7e5000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: WDAT 000000009f7e4000 00224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT 000000009f7e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000158000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000158000000 [ 0.000000] NODE_DATA [0000000157ffb000 - 0000000157ffffff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880153800000-ffff880156ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00158000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0009f675 [ 0.000000] 0: 0x0009f6bf -> 0x0009f74c [ 0.000000] 0: 0x0009f7bf -> 0x0009f7e3 [ 0.000000] 0: 0x0009f7ff -> 0x0009f800 [ 0.000000] 0: 0x00100000 -> 0x00158000 [ 0.000000] On node 0 totalpages: 1013428 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 634719 pages, LIFO batch:31 [ 0.000000] Normal zone: 4928 pages used for memmap [ 0.000000] Normal zone: 355520 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009f675000 - 000000009f6bf000 [ 0.000000] PM: Registered nosave memory: 000000009f74c000 - 000000009f7bf000 [ 0.000000] PM: Registered nosave memory: 000000009f7e3000 - 000000009f7ff000 [ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000a0000000 [ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 [ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:50000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880157c00000 s80576 r8192 d21824 u262144 [ 0.000000] pcpu-alloc: s80576 r8192 d21824 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 994159 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-git4 root=/dev/mapper/luks-5e973de6-86f3-4e42-a6c9-915c9de55abf audit=1 selinux=1 enforcing=1 pcie_aspm=off ro quiet [ 0.000000] audit: enabled (after initialization) [ 0.000000] PCIe ASPM is disabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 3887520k/5636096k available (5944k kernel code, 1582384k absent, 166192k reserved, 5047k data, 772k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 32505856 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2394.443 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.88 BogoMIPS (lpj=2394443) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000030] Security Framework initialized [ 0.000041] SELinux: Initializing. [ 0.000048] SELinux: Starting in enforcing mode [ 0.000404] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001366] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001787] Mount-cache hash table entries: 256 [ 0.001909] Initializing cgroup subsys cpuacct [ 0.001914] Initializing cgroup subsys memory [ 0.001920] Initializing cgroup subsys devices [ 0.001923] Initializing cgroup subsys freezer [ 0.001924] Initializing cgroup subsys net_cls [ 0.001926] Initializing cgroup subsys blkio [ 0.001952] CPU: Physical Processor ID: 0 [ 0.001954] CPU: Processor Core ID: 0 [ 0.001959] mce: CPU supports 9 MCE banks [ 0.001969] CPU0: Thermal monitoring enabled (TM1) [ 0.001976] using mwait in idle threads. [ 0.002994] ACPI: Core revision 20110413 [ 0.031538] ftrace: allocating 19328 entries in 76 pages [ 0.037711] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.047701] CPU0: Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz stepping 05 [ 0.149422] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.149428] ... version: 3 [ 0.149429] ... bit width: 48 [ 0.149430] ... generic registers: 4 [ 0.149431] ... value mask: 0000ffffffffffff [ 0.149432] ... max period: 000000007fffffff [ 0.149433] ... fixed-purpose events: 3 [ 0.149435] ... event mask: 000000070000000f [ 0.149582] Booting Node 0, Processors #1 [ 0.149584] smpboot cpu 1: start_ip = 98000 [ 0.240520] #2 [ 0.240523] smpboot cpu 2: start_ip = 98000 [ 0.331308] #3 [ 0.331310] smpboot cpu 3: start_ip = 98000 [ 0.422124] Brought up 4 CPUs [ 0.422128] Total of 4 processors activated (19153.83 BogoMIPS). [ 0.424410] devtmpfs: initialized [ 0.425227] PM: Registering ACPI NVS region at 9f74c000 (471040 bytes) [ 0.425905] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.425929] RTC time: 7:08:46, date: 07/26/11 [ 0.425959] NET: Registered protocol family 16 [ 0.426086] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.426088] ACPI: bus type pci registered [ 0.426155] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.426158] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.435481] PCI: Using configuration type 1 for base access [ 0.436153] bio: create slab at 0 [ 0.437669] ACPI: EC: Look up EC in DSDT [ 0.439053] ACPI: Executed 1 blocks of module-level executable AML code [ 0.447982] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.451369] ACPI: SSDT 000000009f691918 003F0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.451707] ACPI: Dynamic OEM Table Load: [ 0.451709] ACPI: SSDT (null) 003F0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.451862] ACPI: SSDT 000000009f68f018 008E0 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.452189] ACPI: Dynamic OEM Table Load: [ 0.452191] ACPI: SSDT (null) 008E0 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.459209] ACPI: SSDT 000000009f690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.459583] ACPI: Dynamic OEM Table Load: [ 0.459585] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.462085] ACPI: SSDT 000000009f68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.462428] ACPI: Dynamic OEM Table Load: [ 0.462430] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.465530] ACPI: Interpreter enabled [ 0.465533] ACPI: (supports S0 S3 S4 S5) [ 0.465564] ACPI: Using IOAPIC for interrupt routing [ 0.472464] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.472600] ACPI: No dock devices found. [ 0.472601] HEST: Table not found. [ 0.472603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.472906] \_SB_.PCI0:_OSC invalid UUID [ 0.472908] _OSC request data:1 8 1f [ 0.472911] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.473409] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.473412] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.473413] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.473416] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff] [ 0.473428] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 [ 0.473445] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.473461] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 [ 0.473484] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.473486] pci 0000:00:01.0: PME# disabled [ 0.473530] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 [ 0.473560] pci 0000:00:16.0: reg 10: [mem 0xb7106100-0xb710610f 64bit] [ 0.473634] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.473639] pci 0000:00:16.0: PME# disabled [ 0.473678] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 [ 0.474084] pci 0000:00:1a.0: reg 10: [mem 0xb7105c00-0xb7105fff] [ 0.476368] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.476372] pci 0000:00:1a.0: PME# disabled [ 0.476403] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 [ 0.476424] pci 0000:00:1b.0: reg 10: [mem 0xb7100000-0xb7103fff 64bit] [ 0.476499] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.476503] pci 0000:00:1b.0: PME# disabled [ 0.476526] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 [ 0.476602] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.476607] pci 0000:00:1c.0: PME# disabled [ 0.476638] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604 [ 0.476714] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.476718] pci 0000:00:1c.5: PME# disabled [ 0.476752] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 [ 0.477144] pci 0000:00:1d.0: reg 10: [mem 0xb7105800-0xb7105bff] [ 0.479421] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.479426] pci 0000:00:1d.0: PME# disabled [ 0.479448] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.479521] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601 [ 0.479636] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106 [ 0.479662] pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f] [ 0.479673] pci 0000:00:1f.2: reg 14: [io 0x4054-0x4057] [ 0.479683] pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047] [ 0.479694] pci 0000:00:1f.2: reg 1c: [io 0x4050-0x4053] [ 0.479704] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f] [ 0.479715] pci 0000:00:1f.2: reg 24: [mem 0xb7105000-0xb71057ff] [ 0.479761] pci 0000:00:1f.2: PME# supported from D3hot [ 0.479766] pci 0000:00:1f.2: PME# disabled [ 0.479787] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 [ 0.479806] pci 0000:00:1f.3: reg 10: [mem 0xb7106000-0xb71060ff 64bit] [ 0.479835] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] [ 0.479883] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 [ 0.479911] pci 0000:00:1f.6: reg 10: [mem 0xb7104000-0xb7104fff 64bit] [ 0.480025] pci 0000:01:00.0: [10de:0a29] type 0 class 0x000300 [ 0.480038] pci 0000:01:00.0: reg 10: [mem 0xb2000000-0xb2ffffff] [ 0.480051] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.480063] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.480072] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.480081] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.480132] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403 [ 0.480143] pci 0000:01:00.1: reg 10: [mem 0xb3000000-0xb3003fff] [ 0.480233] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.480235] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.480237] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb30fffff] [ 0.480240] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.480316] pci 0000:02:00.0: [1969:1073] type 0 class 0x000200 [ 0.480344] pci 0000:02:00.0: reg 10: [mem 0xb6100000-0xb613ffff 64bit] [ 0.480361] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f] [ 0.480461] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.480467] pci 0000:02:00.0: PME# disabled [ 0.480503] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.480507] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.480512] pci 0000:00:1c.0: bridge window [mem 0xb6100000-0xb70fffff] [ 0.480519] pci 0000:00:1c.0: bridge window [mem 0xb3100000-0xb40fffff 64bit pref] [ 0.480630] pci 0000:03:00.0: [14e4:4357] type 0 class 0x000280 [ 0.480659] pci 0000:03:00.0: reg 10: [mem 0xb5100000-0xb5103fff 64bit] [ 0.480782] pci 0000:03:00.0: supports D1 D2 [ 0.480784] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.480790] pci 0000:03:00.0: PME# disabled [ 0.480833] pci 0000:00:1c.5: PCI bridge to [bus 03-03] [ 0.480838] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] [ 0.480842] pci 0000:00:1c.5: bridge window [mem 0xb5100000-0xb60fffff] [ 0.480849] pci 0000:00:1c.5: bridge window [mem 0xb4100000-0xb50fffff 64bit pref] [ 0.480923] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) [ 0.480928] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.480932] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.480939] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.480942] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.480943] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.480945] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.480947] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode) [ 0.480970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.481116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.481217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.481266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.481342] \_SB_.PCI0:_OSC invalid UUID [ 0.481344] _OSC request data:1 19 1f [ 0.481347] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) [ 0.484575] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f]) [ 0.484627] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600 [ 0.484643] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600 [ 0.484660] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600 [ 0.484674] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600 [ 0.484688] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600 [ 0.484702] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600 [ 0.484728] pci0000:3f: Unable to request _OSC control (_OSC support mask: 0x19) [ 0.484888] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.484925] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.484961] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.484997] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.485035] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.485071] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.485107] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.485143] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.485224] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.485228] vgaarb: loaded [ 0.485229] vgaarb: bridge control possible 0000:01:00.0 [ 0.485276] SCSI subsystem initialized [ 0.485315] libata version 3.00 loaded. [ 0.485352] usbcore: registered new interface driver usbfs [ 0.485362] usbcore: registered new interface driver hub [ 0.485383] usbcore: registered new device driver usb [ 0.485428] PCI: Using ACPI for IRQ routing [ 0.487716] PCI: pci_cache_line_size set to 64 bytes [ 0.487782] reserve RAM buffer: 000000000009d000 - 000000000009ffff [ 0.487784] reserve RAM buffer: 000000009f675000 - 000000009fffffff [ 0.487786] reserve RAM buffer: 000000009f74c000 - 000000009fffffff [ 0.487787] reserve RAM buffer: 000000009f7e3000 - 000000009fffffff [ 0.487789] reserve RAM buffer: 000000009f800000 - 000000009fffffff [ 0.487857] NetLabel: Initializing [ 0.487861] NetLabel: domain hash size = 128 [ 0.487862] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.487871] NetLabel: unlabeled traffic allowed by default [ 0.487885] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.487889] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.489899] Switching to clocksource hpet [ 0.489969] Switched to NOHz mode on CPU #2 [ 0.490016] Switched to NOHz mode on CPU #3 [ 0.490024] Switched to NOHz mode on CPU #1 [ 0.490862] Switched to NOHz mode on CPU #0 [ 0.494737] pnp: PnP ACPI init [ 0.494751] ACPI: bus type pnp registered [ 0.495067] pnp 00:00: [bus 00-3e] [ 0.495070] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.495071] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.495073] pnp 00:00: [io 0x0d00-0xffff window] [ 0.495075] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.495076] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.495078] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.495079] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.495081] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.495082] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.495083] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.495085] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.495086] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.495088] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.495089] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.495091] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.495092] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.495093] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.495095] pnp 00:00: [mem 0xa0000000-0xfeafffff window] [ 0.495097] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.495168] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.495201] pnp 00:01: [io 0x0000-0x001f] [ 0.495202] pnp 00:01: [io 0x0081-0x0091] [ 0.495203] pnp 00:01: [io 0x0093-0x009f] [ 0.495205] pnp 00:01: [io 0x00c0-0x00df] [ 0.495206] pnp 00:01: [dma 4] [ 0.495223] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.495230] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.495245] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.495332] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.495353] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.495360] pnp 00:04: [io 0x00f0] [ 0.495371] pnp 00:04: [irq 13] [ 0.495387] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.495395] pnp 00:05: [io 0x002e-0x002f] [ 0.495397] pnp 00:05: [io 0x004e-0x004f] [ 0.495398] pnp 00:05: [io 0x0061] [ 0.495399] pnp 00:05: [io 0x0063] [ 0.495400] pnp 00:05: [io 0x0065] [ 0.495402] pnp 00:05: [io 0x0067] [ 0.495403] pnp 00:05: [io 0x0070] [ 0.495404] pnp 00:05: [io 0x0080] [ 0.495405] pnp 00:05: [io 0x0092] [ 0.495408] pnp 00:05: [io 0x00b2-0x00b3] [ 0.495409] pnp 00:05: [io 0x0680-0x069f] [ 0.495410] pnp 00:05: [io 0x0800-0x080f] [ 0.495412] pnp 00:05: [io 0xffff] [ 0.495413] pnp 00:05: [io 0xffff] [ 0.495414] pnp 00:05: [io 0x0400-0x047f] [ 0.495415] pnp 00:05: [io 0x0500-0x057f] [ 0.495417] pnp 00:05: [io 0x164e-0x164f] [ 0.495428] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 7 [io 0x1000-0x1fff] [ 0.495463] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.495465] system 00:05: [io 0x0800-0x080f] has been reserved [ 0.495467] system 00:05: [io 0xffff] has been reserved [ 0.495469] system 00:05: [io 0xffff] has been reserved [ 0.495471] system 00:05: [io 0x0400-0x047f] has been reserved [ 0.495472] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.495475] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.495482] pnp 00:06: [io 0x0070-0x0077] [ 0.495487] pnp 00:06: [irq 8] [ 0.495505] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.495513] pnp 00:07: [io 0x0060] [ 0.495514] pnp 00:07: [io 0x0064] [ 0.495518] pnp 00:07: [irq 1] [ 0.495535] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.495545] pnp 00:08: [irq 12] [ 0.495564] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active) [ 0.495809] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.495811] pnp 00:09: [mem 0xfed10000-0xfed13fff] [ 0.495812] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.495814] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.495815] pnp 00:09: [mem 0xf0000000-0xf3ffffff] [ 0.495816] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.495818] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled] [ 0.495819] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.495821] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.495822] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.495824] pnp 00:09: [mem 0xb7200000-0xb7200fff] [ 0.495867] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.495869] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.495871] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.495873] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.495875] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.495877] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.495879] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.495881] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.495883] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.495884] system 00:09: [mem 0xb7200000-0xb7200fff] has been reserved [ 0.495887] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.496010] pnp 00:0a: [bus 3f] [ 0.496041] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.496054] pnp: PnP ACPI: found 11 devices [ 0.496055] ACPI: ACPI bus type pnp unregistered [ 0.502600] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.502606] PCI: max bus depth: 1 pci_try_num: 2 [ 0.502642] pci 0000:01:00.0: BAR 6: assigned [mem 0xb3080000-0xb30fffff pref] [ 0.502644] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.502646] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.502649] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb30fffff] [ 0.502652] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.502655] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.502658] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.502664] pci 0000:00:1c.0: bridge window [mem 0xb6100000-0xb70fffff] [ 0.502668] pci 0000:00:1c.0: bridge window [mem 0xb3100000-0xb40fffff 64bit pref] [ 0.502676] pci 0000:00:1c.5: PCI bridge to [bus 03-03] [ 0.502679] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] [ 0.502685] pci 0000:00:1c.5: bridge window [mem 0xb5100000-0xb60fffff] [ 0.502690] pci 0000:00:1c.5: bridge window [mem 0xb4100000-0xb50fffff 64bit pref] [ 0.502697] pci 0000:00:1e.0: PCI bridge to [bus 04-04] [ 0.502699] pci 0000:00:1e.0: bridge window [io disabled] [ 0.502704] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.502708] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.502727] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.502730] pci 0000:00:01.0: setting latency timer to 64 [ 0.502740] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.502745] pci 0000:00:1c.0: setting latency timer to 64 [ 0.502751] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.502755] pci 0000:00:1c.5: setting latency timer to 64 [ 0.502763] pci 0000:00:1e.0: setting latency timer to 64 [ 0.502767] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.502769] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.502770] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.502772] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff] [ 0.502774] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.502775] pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb30fffff] [ 0.502777] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.502779] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.502780] pci_bus 0000:02: resource 1 [mem 0xb6100000-0xb70fffff] [ 0.502782] pci_bus 0000:02: resource 2 [mem 0xb3100000-0xb40fffff 64bit pref] [ 0.502784] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.502786] pci_bus 0000:03: resource 1 [mem 0xb5100000-0xb60fffff] [ 0.502787] pci_bus 0000:03: resource 2 [mem 0xb4100000-0xb50fffff 64bit pref] [ 0.502789] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.502791] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.502792] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.502794] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff] [ 0.502820] NET: Registered protocol family 2 [ 0.502942] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.503738] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.505417] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.505622] TCP: Hash tables configured (established 524288 bind 65536) [ 0.505624] TCP reno registered [ 0.505633] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.505654] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.505749] NET: Registered protocol family 1 [ 0.527947] pci 0000:01:00.0: Boot video device [ 0.527984] PCI: CLS 64 bytes, default 64 [ 0.528044] Trying to unpack rootfs image as initramfs... [ 1.050125] Freeing initrd memory: 28600k freed [ 1.056526] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.056532] Placing 64MB software IO TLB between ffff88009b675000 - ffff88009f675000 [ 1.056533] software IO TLB at phys 0x9b675000 - 0x9f675000 [ 1.056554] Simple Boot Flag at 0x44 set to 0x1 [ 1.057161] audit: initializing netlink socket (enabled) [ 1.057173] type=2000 audit(1311664126.875:1): initialized [ 1.078193] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.079397] VFS: Disk quotas dquot_6.5.2 [ 1.079434] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.079701] msgmni has been set to 7648 [ 1.079746] SELinux: Registering netfilter hooks [ 1.080001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.080004] io scheduler noop registered [ 1.080005] io scheduler deadline registered [ 1.080050] io scheduler cfq registered (default) [ 1.080139] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.080166] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.080313] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.080330] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.080332] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.080741] intel_idle: MWAIT substates: 0x1120 [ 1.080743] intel_idle: v0.4 model 0x25 [ 1.080744] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.479532] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.479624] ACPI: AC Adapter [ACAD] (on-line) [ 1.479773] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0 [ 1.479777] ACPI: Power Button [PWRB] [ 1.479803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1 [ 1.479824] ACPI: Lid Switch [LID0] [ 1.479853] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input2 [ 1.479856] ACPI: Sleep Button [SLPB] [ 1.479879] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.479881] ACPI: Power Button [PWRF] [ 1.480087] ACPI: acpi_idle yielding to intel_idle [ 1.481326] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.481328] ACPI: Thermal Zone [THRM] (61 C) [ 1.481336] ERST: Table is not found! [ 1.482130] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.482136] ACPI: Battery Slot [BAT1] (battery present) [ 1.499650] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.556792] Non-volatile memory driver v1.3 [ 1.557643] brd: module loaded [ 1.558050] loop: module loaded [ 1.558119] ahci 0000:00:1f.2: version 3.0 [ 1.558140] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.558194] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.558226] ahci: SSS flag set, parallel bus scan disabled [ 1.558262] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.558266] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 1.558271] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.560567] scsi0 : ahci [ 1.560629] scsi1 : ahci [ 1.560673] scsi2 : ahci [ 1.560717] scsi3 : ahci [ 1.560769] ata1: SATA max UDMA/133 abar m2048@0xb7105000 port 0xb7105100 irq 41 [ 1.560773] ata2: SATA max UDMA/133 abar m2048@0xb7105000 port 0xb7105180 irq 41 [ 1.560774] ata3: DUMMY [ 1.560775] ata4: DUMMY [ 1.560833] Fixed MDIO Bus: probed [ 1.560905] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.560919] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.560932] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.560935] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.560997] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.561031] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.564938] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.564952] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb7105c00 [ 1.574284] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.574316] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.574320] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.574324] usb usb1: Product: EHCI Host Controller [ 1.574327] usb usb1: Manufacturer: Linux 3.0.0-git4 ehci_hcd [ 1.574330] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.574449] hub 1-0:1.0: USB hub found [ 1.574453] hub 1-0:1.0: 3 ports detected [ 1.574509] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.574522] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.574525] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.574570] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.574595] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.578482] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.578494] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb7105800 [ 1.588266] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.588298] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.588303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.588306] usb usb2: Product: EHCI Host Controller [ 1.588309] usb usb2: Manufacturer: Linux 3.0.0-git4 ehci_hcd [ 1.588312] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.588410] hub 2-0:1.0: USB hub found [ 1.588413] hub 2-0:1.0: 3 ports detected [ 1.588489] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.595063] i8042: Detected active multiplexing controller, rev 1.1 [ 1.598629] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.598635] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.598641] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.598643] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.598645] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.598780] mousedev: PS/2 mouse device common for all mice [ 1.598972] rtc_cmos 00:06: RTC can wake from S4 [ 1.599083] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.599112] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.599181] device-mapper: uevent: version 1.0.3 [ 1.599266] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 1.599375] cpuidle: using governor ladder [ 1.599484] cpuidle: using governor menu [ 1.599486] EFI Variables Facility v0.08 2004-May-17 [ 1.599572] usbcore: registered new interface driver usbhid [ 1.599573] usbhid: USB HID core driver [ 1.599595] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.599745] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.599761] type=1325 audit(1311664127.418:2): table=filter family=2 entries=0 [ 1.599764] TCP cubic registered [ 1.599765] Initializing XFRM netlink socket [ 1.599777] NET: Registered protocol family 17 [ 1.599783] Registering the dns_resolver key type [ 1.599911] PM: Hibernation image not present or could not be loaded. [ 1.599922] registered taskstats version 1 [ 1.600215] Magic number: 3:764:117 [ 1.600390] rtc_cmos 00:06: setting system clock to 2011-07-26 07:08:47 UTC (1311664127) [ 1.600421] Initializing network drop monitor service [ 1.621375] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.866882] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.868147] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133 [ 1.868153] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.869687] ata1.00: configured for UDMA/133 [ 1.869922] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5 [ 1.870102] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.870126] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.870172] sd 0:0:0:0: [sda] Write Protect is off [ 1.870175] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.870190] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.875937] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 1.935826] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 1.936523] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.990294] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.990299] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.990726] hub 1-1:1.0: USB hub found [ 1.990976] hub 1-1:1.0: 6 ports detected [ 2.055649] Refined TSC clocksource calibration: 2394.414 MHz. [ 2.055656] Switching to clocksource tsc [ 2.093506] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 2.174452] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.176476] ata2.00: ATAPI: HL-DT-STDVDRAM GT31N, 1.00, max UDMA/100 [ 2.180078] ata2.00: configured for UDMA/100 [ 2.183244] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT31N 1.00 PQ: 0 ANSI: 5 [ 2.186340] sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.186345] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.186562] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.186661] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.188137] Freeing unused kernel memory: 772k freed [ 2.188266] Write protecting the kernel read-only data: 10240k [ 2.188969] Freeing unused kernel memory: 180k freed [ 2.194126] Freeing unused kernel memory: 1900k freed [ 2.208655] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.208660] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.208947] hub 2-1:1.0: USB hub found [ 2.209040] hub 2-1:1.0: 8 ports detected [ 2.225098] dracut: dracut-006-6.fc14 [ 2.232633] hub 1-1:1.0: unable to enumerate USB device on port 1 [ 2.255914] udevd[110]: starting version 172 [ 2.286337] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS [ 2.286747] acpi device:0c: registered as cooling_device4 [ 2.286819] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input5 [ 2.287381] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.288338] wmi: Mapper loaded [ 2.291446] Linux agpgart interface v0.103 [ 2.308913] [drm] Initialized drm 1.1.0 20060810 [ 2.365738] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.365744] nouveau 0000:01:00.0: setting latency timer to 64 [ 2.367886] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5480a2) [ 2.374892] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 2.421904] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 [ 2.462631] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 2.462634] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 2.462637] [drm] nouveau 0000:01:00.0: Bios version 70.16.4d.00 [ 2.462640] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 2.462642] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 2.462645] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [ 2.462647] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02014300 00000000 [ 2.462649] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02021362 00020010 [ 2.462651] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000 [ 2.462654] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 2.462656] [drm] nouveau 0000:01:00.0: 0: 0x00000340: type 0x40 idx 0 tag 0xff [ 2.462658] [drm] nouveau 0000:01:00.0: 1: 0x00001061: type 0x61 idx 1 tag 0x07 [ 2.462660] [drm] nouveau 0000:01:00.0: 2: 0x00000147: type 0x47 idx 2 tag 0xff [ 2.462662] [drm] nouveau 0000:01:00.0: 3: 0x00202346: type 0x46 idx 3 tag 0x08 [ 2.462664] [drm] nouveau 0000:01:00.0: 4: 0x00000400: type 0x00 idx 4 tag 0xff [ 2.462666] [drm] nouveau 0000:01:00.0: 5: 0x00000210: type 0x10 idx 5 tag 0xff [ 2.462668] [drm] nouveau 0000:01:00.0: 6: 0x00000211: type 0x11 idx 6 tag 0xff [ 2.462670] [drm] nouveau 0000:01:00.0: 7: 0x00000213: type 0x13 idx 7 tag 0xff [ 2.462674] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6DD9 [ 2.507369] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6 [ 2.544153] [drm] nouveau 0000:01:00.0: 0x7083: Condition still not met after 20ms, skipping following opcodes [ 2.554879] usb 1-1.1: new high speed USB device number 4 using ehci_hcd [ 2.564126] [drm] nouveau 0000:01:00.0: 0x7087: Condition still not met after 20ms, skipping following opcodes [ 2.584120] [drm] nouveau 0000:01:00.0: 0x720D: Condition still not met after 20ms, skipping following opcodes [ 2.584126] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x723A [ 2.591881] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x8113 [ 2.591887] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x8135 [ 2.634375] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8297 [ 2.634377] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x82FC [ 2.654349] [drm] nouveau 0000:01:00.0: 0x6C59: Condition still not met after 20ms, skipping following opcodes [ 2.673162] [drm] nouveau 0000:01:00.0: 3 available performance level(s) [ 2.673167] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz timing 2 voltage 800mV [ 2.673170] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 324MHz timing 1 voltage 850mV [ 2.673173] [drm] nouveau 0000:01:00.0: 3: core 575MHz shader 1265MHz memory 790MHz timing 0 voltage 950mV [ 2.673201] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 324MHz voltage 850mV [ 2.676864] [TTM] Zone kernel: Available graphics memory: 1959486 kiB. [ 2.676867] [TTM] Initializing pool allocator. [ 2.676887] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM [ 2.677810] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 2.680713] usb 1-1.1: New USB device found, idVendor=064e, idProduct=a219 [ 2.680716] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.680718] usb 1-1.1: Product: 1.3M WebCam [ 2.680719] usb 1-1.1: Manufacturer: Suyin [ 2.680721] usb 1-1.1: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05 [ 2.710875] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 2.760885] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.760887] [drm] No driver support for vblank timestamp query. [ 2.920742] [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x320000, bo ffff880148c51c00 [ 2.920843] fbcon: nouveaufb (fb0) is primary device [ 4.570848] Console: switching to colour frame buffer device 170x48 [ 4.572139] fb0: nouveaufb frame buffer device [ 4.572141] drm: registered panic notifier [ 4.572146] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 4.628528] dracut: Starting plymouth daemon [ 5.558579] dracut: luksOpen /dev/sda7 luks-c5753689-c29d-44bb-ab4c-83aaf48fb5b8 [ 12.665512] dracut: Scanning devices dm-0 for LVM volume groups [ 12.671711] dracut: Reading all physical volumes. This may take a while... [ 12.818021] dracut: Found volume group "vg_vortex" using metadata type lvm2 [ 12.912332] dracut: 5 logical volume(s) in volume group "vg_vortex" now active [ 13.756196] dracut: luksOpen /dev/mapper/vg_vortex-LogVol04 luks-5e973de6-86f3-4e42-a6c9-915c9de55abf [ 14.907324] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 15.025566] dracut: Checking filesystem. [ 15.025630] dracut: fsck -T -a /dev/mapper/luks-5e973de6-86f3-4e42-a6c9-915c9de55abf [ 15.096275] dracut: /dev/mapper/luks-5e973de6-86f3-4e42-a6c9-915c9de55abf: clean, 3723754/14524416 files, 35672014/58097159 blocks [ 15.096588] dracut: Remounting /dev/mapper/luks-5e973de6-86f3-4e42-a6c9-915c9de55abf with -o ro, [ 15.112230] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 15.160646] dracut: Mounted root filesystem /dev/mapper/luks-5e973de6-86f3-4e42-a6c9-915c9de55abf [ 15.532819] dracut: Loading SELinux policy [ 16.151627] SELinux: 2048 avtab hash slots, 215499 rules. [ 16.196528] SELinux: 2048 avtab hash slots, 215499 rules. [ 16.444154] SELinux: 9 users, 14 roles, 3520 types, 184 bools, 1 sens, 1024 cats [ 16.444158] SELinux: 81 classes, 215499 rules [ 16.446764] SELinux: Permission read_policy in class security not defined in policy. [ 16.446880] SELinux: Permission syslog in class capability2 not defined in policy. [ 16.446885] SELinux: the above unknown classes and permissions will be allowed [ 16.446889] SELinux: Completing initialization. [ 16.446890] SELinux: Setting up existing superblocks. [ 16.446897] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 16.446902] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 16.447043] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 16.447049] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 16.447057] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 16.447089] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 16.448908] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 16.448913] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 16.449499] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 16.449507] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 16.449511] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 16.449540] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 16.449556] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 16.449573] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 16.449585] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 16.449590] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 16.450261] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 16.450280] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 16.451401] SELinux: initialized (dev dm-6, type ext4), uses xattr [ 16.493539] type=1403 audit(1311664141.941:3): policy loaded auid=4294967295 ses=4294967295 [ 16.493813] type=1300 audit(1311664141.941:3): arch=c000003e syscall=1 success=yes exit=6202276 a0=4 a1=7f058a31c000 a2=5ea3a4 a3=7ffffe1a86d0 items=0 ppid=540 pid=541 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="load_policy" exe="/sbin/load_policy" subj=system_u:system_r:kernel_t:s0 key=(null) [ 16.497316] dracut: [ 16.910070] dracut: Switching root [ 18.653301] udevd[571]: starting version 172 [ 20.848094] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2 [ 21.142874] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2 [ 21.144146] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2 [ 21.145405] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2 [ 21.146771] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 21.766559] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 21.873403] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 22.278553] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 22.279025] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.279031] mei 0000:00:16.0: setting latency timer to 64 [ 22.748959] iTCO_vendor_support: vendor-support=0 [ 22.760806] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 22.760881] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460) [ 22.761189] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.836593] atl1c 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.836608] atl1c 0000:02:00.0: setting latency timer to 64 [ 22.863277] Linux video capture interface: v2.00 [ 22.937593] atl1c 0000:02:00.0: version 1.0.1.0-NAPI [ 23.227256] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219) [ 23.236809] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8 [ 23.236878] usbcore: registered new interface driver uvcvideo [ 23.236879] USB Video Class driver (v1.1.0) [ 23.444886] cfg80211: Calling CRDA to update world regulatory domain [ 23.564226] acer_wmi: Acer Laptop ACPI-WMI Extras [ 23.564546] acer_wmi: Function bitmap for Communication Button: 0x1 [ 23.564550] acer_wmi: Brightness must be controlled by generic video driver [ 23.565021] input: Acer WMI hotkeys as /devices/virtual/input/input9 [ 24.279674] cfg80211: World regulatory domain updated: [ 24.279678] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.279681] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.279683] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.279685] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.279686] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.279688] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.504478] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. [ 24.626547] snd_hda_intel 0000:00:1b.0: BAR 0: set to [mem 0xb7100000-0xb7103fff 64bit] (PCI address [0xb7100000-0xb7103fff]) [ 24.626557] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 24.626575] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 24.626651] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 24.626688] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 24.763062] ALSA sound/pci/hda/patch_realtek.c:1204 SKU: Nid=0x1d sku_cfg=0x4017992d [ 24.763065] ALSA sound/pci/hda/patch_realtek.c:1206 SKU: port_connectivity=0x1 [ 24.763068] ALSA sound/pci/hda/patch_realtek.c:1207 SKU: enable_pcbeep=0x1 [ 24.763070] ALSA sound/pci/hda/patch_realtek.c:1208 SKU: check_sum=0x00000007 [ 24.763072] ALSA sound/pci/hda/patch_realtek.c:1209 SKU: customization=0x00000099 [ 24.763074] ALSA sound/pci/hda/patch_realtek.c:1210 SKU: external_amp=0x5 [ 24.763076] ALSA sound/pci/hda/patch_realtek.c:1211 SKU: platform_type=0x1 [ 24.763078] ALSA sound/pci/hda/patch_realtek.c:1212 SKU: swap=0x0 [ 24.763080] ALSA sound/pci/hda/patch_realtek.c:1213 SKU: override=0x1 [ 24.763679] hda_codec: ALC271X: BIOS auto-probing. [ 24.763688] ALSA sound/pci/hda/hda_codec.c:4878 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 24.763690] ALSA sound/pci/hda/hda_codec.c:4882 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 24.763692] ALSA sound/pci/hda/hda_codec.c:4886 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 24.763694] ALSA sound/pci/hda/hda_codec.c:4887 mono: mono_out=0x0 [ 24.763695] ALSA sound/pci/hda/hda_codec.c:4890 dig-out=0x1e/0x0 [ 24.763697] ALSA sound/pci/hda/hda_codec.c:4891 inputs: [ 24.763699] ALSA sound/pci/hda/hda_codec.c:4895 Internal Mic=0x12 [ 24.763701] ALSA sound/pci/hda/hda_codec.c:4895 Mic=0x18 [ 24.763702] ALSA sound/pci/hda/hda_codec.c:4897 [ 24.765316] ALSA sound/pci/hda/patch_realtek.c:1267 realtek: No valid SSID, checking pincfg 0x4017992d for NID 0x1d [ 24.765318] ALSA sound/pci/hda/patch_realtek.c:1283 realtek: Enabling init ASM_ID=0x992d CODEC_ID=10ec0269 [ 24.770509] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 24.770598] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 24.774586] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.774591] hda_intel: Disabling MSI [ 24.774659] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 24.781905] ALSA sound/pci/hda/hda_intel.c:1454 Enable delay in RIRB handling [ 24.786250] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. [ 24.788100] brcmsmac 0000:03:00.0: bus 3 slot 0 func 0 irq 5 [ 24.788116] brcmsmac 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 24.788124] brcmsmac 0000:03:00.0: setting latency timer to 64 [ 24.927874] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 24.928025] cfg80211: Calling CRDA for country: US [ 24.930950] cfg80211: Regulatory domain changed to country: US [ 24.930953] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.930956] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 24.930959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 24.930961] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.930963] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.930965] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.930968] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 25.091857] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 25.130785] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 25.169739] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 25.208662] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 25.227108] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 25.227210] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 25.227307] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 25.227400] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 25.335655] cfg80211: Calling CRDA for country: IT [ 25.338323] cfg80211: Regulatory domain changed to country: IT [ 25.338325] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.338327] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.338329] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.338331] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.338333] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 36.805027] EXT4-fs (dm-6): re-mounted. Opts: (null) [ 37.092000] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 37.092012] SELinux: initialized (dev sda5, type ext4), uses xattr [ 37.140277] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 37.140284] SELinux: initialized (dev dm-8, type ext4), uses xattr [ 37.173822] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 37.173827] SELinux: initialized (dev dm-3, type ext4), uses xattr [ 37.227442] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) [ 37.227447] SELinux: initialized (dev dm-9, type ext4), uses xattr [ 37.259900] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 37.269595] SELinux: initialized (dev dm-7, type ext4), uses xattr [ 38.352293] Adding 16380k swap on /dev/sda6. Priority:-1 extents:1 across:16380k [ 38.357189] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 40.436358] type=1325 audit(1311656966.393:4): table=filter family=2 entries=4 [ 40.436384] type=1300 audit(1311656966.393:4): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=a59000 items=0 ppid=1181 pid=1192 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/sbin/xtables-multi" subj=system_u:system_r:initrc_t:s0 key=(null) [ 40.637452] type=1305 audit(1311656966.596:5): audit_pid=1229 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 47.867157] atl1c 0000:02:00.0: irq 43 for MSI/MSI-X [ 47.963422] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) [ 47.963451] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement) [ 47.963482] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement) [ 47.964973] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) [ 48.195048] RPC: Registered named UNIX socket transport module. [ 48.195051] RPC: Registered udp transport module. [ 48.195052] RPC: Registered tcp transport module. [ 48.195053] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 48.202852] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ 49.732099] hald-probe-inpu[1608]: segfault at 7b02d ip 00007f1b8cb09859 sp 00007ffff3ca4810 error 4 in libc-2.14.so[7f1b8ca8d000+195000] [ 49.732812] hald-probe-inpu[1610]: segfault at 7b02d ip 00007fc4b9c82859 sp 00007fff49bd95f0 error 4 in libc-2.14.so[7fc4b9c06000+195000] [ 49.733621] hald-probe-inpu[1609]: segfault at 7b02d ip 00007f19940e4859 sp 00007fff85052c80 error 4 in libc-2.14.so[7f1994068000+195000] [ 49.734189] hald-probe-inpu[1611]: segfault at 7b02d ip 00007fd9d3457859 sp 00007fffe285fe50 error 4 in libc-2.14.so[7fd9d33db000+195000] [ 49.757239] hald-probe-inpu[1613]: segfault at 7b02d ip 00007f7264283859 sp 00007fff2712d280 error 4 in libc-2.14.so[7f7264207000+195000] [ 54.361197] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) [ 55.315538] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) [ 55.315909] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) [ 55.316127] wlan0: authenticate with 00:07:40:dd:9c:80 (try 1) [ 55.317695] wlan0: authenticated [ 55.317711] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) [ 55.317977] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) [ 55.318133] wlan0: associate with 00:07:40:dd:9c:80 (try 1) [ 55.320842] wlan0: RX AssocResp from 00:07:40:dd:9c:80 (capab=0x411 status=0 aid=1) [ 55.320846] wlan0: associated [ 55.322165] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) [ 55.322322] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated [ 55.322491] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 55.323202] cfg80211: Calling CRDA for country: IT [ 55.357669] cfg80211: Regulatory domain changed to country: IT [ 55.357673] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 55.357675] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 55.357677] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 55.357679] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 55.357681] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 173.868401] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) [ 173.868503] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: disassociated [ 173.868599] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement) [ 173.868691] wlan0: deauthenticating from 00:07:40:dd:9c:80 by local choice (reason=3) [ 173.934363] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) [ 173.934528] cfg80211: Calling CRDA to update world regulatory domain [ 173.966638] cfg80211: World regulatory domain updated: [ 173.966643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 173.966646] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 173.966649] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 173.966651] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 173.966654] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 173.966656] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 173.966679] cfg80211: Calling CRDA for country: IT [ 173.971060] cfg80211: Regulatory domain changed to country: IT [ 173.971064] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 173.971066] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 173.971068] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 173.971069] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 173.971071] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 175.456899] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement) [ 175.457458] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement) [ 175.471600] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) [ 175.608942] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) [ 176.561907] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) [ 176.561923] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) [ 176.561927] wlan0: authenticate with 00:07:40:dd:9c:80 (try 1) [ 176.563420] wlan0: authenticated [ 176.563430] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) [ 176.563442] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) [ 176.563445] wlan0: associate with 00:07:40:dd:9c:80 (try 1) [ 176.565770] wlan0: RX AssocResp from 00:07:40:dd:9c:80 (capab=0x411 status=0 aid=1) [ 176.565773] wlan0: associated [ 176.567117] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) [ 176.567121] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated [ 176.567154] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 176.567610] cfg80211: Calling CRDA for country: IT [ 176.585667] cfg80211: Regulatory domain changed to country: IT [ 176.585671] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 176.585673] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 176.585676] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 176.585679] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 176.585681] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 191.786091] [drm:drm_debugfs_create_files] *ERROR* Cannot create /sys/kernel/debug/dri/I4ÃJˆÿÿ/3 [ 192.211447] gnome-power-man[2114] trap int3 ip:7f1837ac22c8 sp:7fff8de580d0 error:0 [ 192.211844] gnome-power-man[2105] trap int3 ip:7fbd705692c8 sp:7fff4c9adf50 error:0 [ 196.252376] lp: driver loaded but no devices found [ 196.512664] ppdev: user-space parallel port driver [ 198.148143] gnome-settings-[2027]: segfault at 1 ip 00007f8118e67024 sp 00007fffe49c4e70 error 4 in libc-2.14.so[7f8118e1e000+195000] [ 200.173772] gnome-settings-[2154]: segfault at 1 ip 00007f9f0fd49024 sp 00007ffffddeeb90 error 4 in libc-2.14.so[7f9f0fd00000+195000] Module Size Used by ppdev 17635 0 parport_pc 36667 0 lp 17783 0 parport 44494 3 ppdev,parport_pc,lp sunrpc 241014 1 acpi_cpufreq 18729 1 freq_table 14198 1 acpi_cpufreq mperf 12607 1 acpi_cpufreq xt_iprange 12783 2 uinput 17522 0 snd_hda_codec_hdmi 35618 4 arc4 12529 2 brcmsmac 714786 0 snd_hda_codec_realtek 65212 1 snd_hda_intel 32812 0 brcmutil 16402 1 brcmsmac mac80211 322486 1 brcmsmac snd_hda_codec 122590 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 17611 1 snd_hda_codec snd_seq 76582 0 snd_seq_device 14023 1 snd_seq snd_pcm 104679 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec acer_wmi 23726 0 cfg80211 203658 2 brcmsmac,mac80211 snd_timer 28670 2 snd_seq,snd_pcm snd 78111 9 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer uvcvideo 75154 0 videodev 88541 1 uvcvideo atl1c 74055 0 sparse_keymap 13481 1 acer_wmi iTCO_wdt 17743 0 iTCO_vendor_support 13419 1 iTCO_wdt mei 79640 0 soundcore 14447 1 snd v4l2_compat_ioctl32 16638 1 videodev i2c_i801 17738 0 serio_raw 13166 0 pcspkr 12702 0 rfkill 25263 2 acer_wmi,cfg80211 snd_page_alloc 18144 2 snd_hda_intel,snd_pcm crc_ccitt 12573 1 brcmsmac microcode 22766 0 ext4 426789 6 jbd2 84140 1 ext4 aes_x86_64 17094 82 aes_generic 37908 1 aes_x86_64 xts 12719 40 gf128mul 18428 1 xts dm_crypt 22723 5 nouveau 863664 2 ttm 72284 1 nouveau drm_kms_helper 39954 1 nouveau drm 248652 4 nouveau,ttm,drm_kms_helper agpgart 41383 2 ttm,drm i2c_algo_bit 17146 1 nouveau i2c_core 37818 6 videodev,i2c_i801,nouveau,drm_kms_helper,drm,i2c_algo_bit mxm_wmi 12823 1 nouveau wmi 18575 2 acer_wmi,mxm_wmi video 18934 1 nouveau