[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.3-gentoo (root@thinkpad) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #2 SMP PREEMPT Thu Aug 18 20:34:07 CEST 2011 [ 0.000000] Command line: root=/dev/sda3 init=/bin/systemd quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 64669YG/64669YG, BIOS 7LETC5WW (2.25 ) 11/14/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 13C000000 mask FFC000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6b0000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf6b0000 page 4k [ 0.000000] kernel direct mapping tables up to bf6b0000 @ bf6ab000-bf6b0000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ 13bffa000-13c000000 [ 0.000000] ACPI: RSDP 00000000000f68c0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bf6bb647 00094 (v01 LENOVO TP-7L 00002250 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bf6bb700 000F4 (v03 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110413/tbfadt-529) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110413/tbfadt-560) [ 0.000000] ACPI: DSDT 00000000bf6bbb1d 10009 (v01 LENOVO TP-7L 00002250 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bf6e4000 00040 [ 0.000000] ACPI: SSDT 00000000bf6bb8b4 00269 (v01 LENOVO TP-7L 00002250 MSFT 03000000) [ 0.000000] ACPI: ECDT 00000000bf6cbb26 00052 (v01 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: TCPA 00000000bf6cbb78 00032 (v02 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bf6cbbaa 00068 (v01 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bf6cbc12 0003C (v01 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bf6cbc4e 00038 (v01 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bf6cbdf0 00176 (v01 LENOVO TP-7L 00002250 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bf6cbf66 00028 (v01 LENOVO TP-7L 00002250 LTP 00000001) [ 0.000000] ACPI: ASF! 00000000bf6cbf8e 00072 (v16 LENOVO TP-7L 00002250 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000bf6e26d9 0025F (v01 LENOVO TP-7L 00002250 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bf6e2938 000A6 (v01 LENOVO TP-7L 00002250 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bf6e29de 004F7 (v01 LENOVO TP-7L 00002250 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bf6e2ed5 001D8 (v01 LENOVO TP-7L 00002250 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880137600000-ffff88013adfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bf6b0 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1029693 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cc000 [ 0.000000] PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf700000 [ 0.000000] PM: Registered nosave memory: 00000000bf700000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88013bc00000 s70144 r8192 d24064 u1048576 [ 0.000000] pcpu-alloc: s70144 r8192 d24064 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1011992 [ 0.000000] Kernel command line: root=/dev/sda3 init=/bin/systemd quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3978860k/5177344k available (6379k kernel code, 1058572k absent, 139912k reserved, 2532k data, 500k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2094.683 MHz processor. [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.36 BogoMIPS (lpj=2094683) [ 0.001008] pid_max: default: 32768 minimum: 301 [ 0.001026] Security Framework initialized [ 0.001040] Mount-cache hash table entries: 256 [ 0.001163] Initializing cgroup subsys cpuacct [ 0.001167] Initializing cgroup subsys devices [ 0.001169] Initializing cgroup subsys freezer [ 0.001171] Initializing cgroup subsys blkio [ 0.001196] CPU: Physical Processor ID: 0 [ 0.001197] CPU: Processor Core ID: 0 [ 0.001199] mce: CPU supports 6 MCE banks [ 0.001205] CPU0: Thermal monitoring enabled (TM2) [ 0.001208] using mwait in idle threads. [ 0.001249] ACPI: Core revision 20110413 [ 0.008439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.018990] CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.018998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.018998] ... version: 2 [ 0.018998] ... bit width: 40 [ 0.018998] ... generic registers: 2 [ 0.018998] ... value mask: 000000ffffffffff [ 0.018998] ... max period: 000000007fffffff [ 0.018998] ... fixed-purpose events: 3 [ 0.018998] ... event mask: 0000000700000003 [ 0.030010] Booting Node 0, Processors #1 Ok. [ 0.030013] smpboot cpu 1: start_ip = 98000 [ 0.101990] TSC synchronization [CPU#0 -> CPU#1]: [ 0.101990] Measured 1083401 cycles TSC warp between CPUs, turning off TSC clock. [ 0.101990] Marking TSC unstable due to check_tsc_sync_source failed [ 0.102003] Brought up 2 CPUs [ 0.102005] Total of 2 processors activated (8378.66 BogoMIPS). [ 0.103049] devtmpfs: initialized [ 0.103170] PM: Registering ACPI NVS region at bf6cc000 (212992 bytes) [ 0.103170] NET: Registered protocol family 16 [ 0.103170] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.103170] ACPI: bus type pci registered [ 0.103209] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.103213] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.115928] PCI: Using configuration type 1 for base access [ 0.117176] bio: create slab at 0 [ 0.117176] ACPI: Added _OSI(Linux) [ 0.118984] ACPI: EC: EC description table is found, configuring boot EC [ 0.123886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.158013] ACPI: SSDT 00000000bf6e1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.158451] ACPI: Dynamic OEM Table Load: [ 0.158454] ACPI: SSDT (null) 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.158574] ACPI: SSDT 00000000bf6e1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.159037] ACPI: Dynamic OEM Table Load: [ 0.159039] ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.162157] ACPI: SSDT 00000000bf6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.162592] ACPI: Dynamic OEM Table Load: [ 0.162594] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.162665] ACPI: SSDT 00000000bf6e1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.163096] ACPI: Dynamic OEM Table Load: [ 0.163099] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.167153] ACPI: Interpreter enabled [ 0.167156] ACPI: (supports S0 S3 S4 S5) [ 0.167173] ACPI: Using IOAPIC for interrupt routing [ 0.170027] ACPI: Power Resource [PUBS] (on) [ 0.196459] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.242177] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.242181] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.242372] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.242415] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.242418] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.242420] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.242423] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.242425] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.242428] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.242430] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 0.242433] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] [ 0.242981] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.243023] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.243036] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit] [ 0.243045] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.243051] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.243081] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.243092] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit] [ 0.243154] pci 0000:00:03.0: [8086:2a04] type 0 class 0x000780 [ 0.243190] pci 0000:00:03.0: reg 10: [mem 0xfe226800-0xfe22680f 64bit] [ 0.243294] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.243300] pci 0000:00:03.0: PME# disabled [ 0.243321] pci 0000:00:03.2: [8086:2a06] type 0 class 0x000101 [ 0.243339] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f] [ 0.243347] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f] [ 0.243355] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827] [ 0.243363] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b] [ 0.243371] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f] [ 0.243418] pci 0000:00:03.3: [8086:2a07] type 0 class 0x000700 [ 0.243433] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] [ 0.243442] pci 0000:00:03.3: reg 14: [mem 0xfe024000-0xfe024fff] [ 0.243660] pci 0000:00:19.0: [8086:1049] type 0 class 0x000200 [ 0.243698] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff] [ 0.243711] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff] [ 0.243738] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.243823] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.243832] pci 0000:00:19.0: PME# disabled [ 0.243863] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.243977] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.244062] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.244176] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.244287] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.244325] pci 0000:00:1a.7: reg 10: [mem 0xfe226c00-0xfe226fff] [ 0.244497] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.244505] pci 0000:00:1a.7: PME# disabled [ 0.244548] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.244573] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit] [ 0.244676] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.244685] pci 0000:00:1b.0: PME# disabled [ 0.244734] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.244844] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.244853] pci 0000:00:1c.0: PME# disabled [ 0.244901] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.245007] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.245014] pci 0000:00:1c.1: PME# disabled [ 0.245063] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604 [ 0.245174] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.245181] pci 0000:00:1c.2: PME# disabled [ 0.245232] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 [ 0.245337] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.245344] pci 0000:00:1c.3: PME# disabled [ 0.245397] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.245498] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.245505] pci 0000:00:1c.4: PME# disabled [ 0.245558] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.245660] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf] [ 0.245744] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.245860] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df] [ 0.245941] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.246060] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff] [ 0.246175] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.246224] pci 0000:00:1d.7: reg 10: [mem 0xfe227000-0xfe2273ff] [ 0.246413] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.246420] pci 0000:00:1d.7: PME# disabled [ 0.246456] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.246569] pci 0000:00:1f.0: [8086:2811] type 0 class 0x000601 [ 0.246722] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.246732] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.246738] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.246745] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.246751] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.246814] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.246849] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.246874] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.246895] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.246922] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.246947] pci 0000:00:1f.1: reg 20: [io 0x1c00-0x1c0f] [ 0.247044] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.247073] pci 0000:00:1f.2: reg 10: [io 0x1c50-0x1c57] [ 0.247086] pci 0000:00:1f.2: reg 14: [io 0x1c44-0x1c47] [ 0.247099] pci 0000:00:1f.2: reg 18: [io 0x1c48-0x1c4f] [ 0.247112] pci 0000:00:1f.2: reg 1c: [io 0x1c40-0x1c43] [ 0.247125] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.247138] pci 0000:00:1f.2: reg 24: [mem 0xfe226000-0xfe2267ff] [ 0.247194] pci 0000:00:1f.2: PME# supported from D3hot [ 0.247201] pci 0000:00:1f.2: PME# disabled [ 0.247233] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.247257] pci 0000:00:1f.3: reg 10: [mem 0xfe227400-0xfe2274ff] [ 0.247297] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.247439] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.247446] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.247452] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] [ 0.247467] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.247594] pci 0000:03:00.0: [8086:4230] type 0 class 0x000280 [ 0.247644] pci 0000:03:00.0: reg 10: [mem 0xdf3fe000-0xdf3fffff 64bit] [ 0.247817] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.247830] pci 0000:03:00.0: PME# disabled [ 0.247907] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.247912] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.247917] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff] [ 0.247925] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.247994] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.247999] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.248004] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] [ 0.248012] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.248074] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.248079] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.248084] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.248092] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.248156] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.248161] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.248166] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.248175] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.248224] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607 [ 0.248251] pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff] [ 0.248282] pci 0000:15:00.0: supports D1 D2 [ 0.248283] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248290] pci 0000:15:00.0: PME# disabled [ 0.248315] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00 [ 0.248342] pci 0000:15:00.1: reg 10: [mem 0xf8301000-0xf83017ff] [ 0.248452] pci 0000:15:00.1: supports D1 D2 [ 0.248453] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248459] pci 0000:15:00.1: PME# disabled [ 0.248485] pci 0000:15:00.2: [1180:0822] type 0 class 0x000805 [ 0.248512] pci 0000:15:00.2: reg 10: [mem 0xf8301800-0xf83018ff] [ 0.248621] pci 0000:15:00.2: supports D1 D2 [ 0.248623] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248629] pci 0000:15:00.2: PME# disabled [ 0.248655] pci 0000:15:00.3: [1180:0843] type 0 class 0x000880 [ 0.248682] pci 0000:15:00.3: reg 10: [mem 0xf8301c00-0xf8301cff] [ 0.248791] pci 0000:15:00.3: supports D1 D2 [ 0.248793] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248799] pci 0000:15:00.3: PME# disabled [ 0.248824] pci 0000:15:00.4: [1180:0592] type 0 class 0x000880 [ 0.248851] pci 0000:15:00.4: reg 10: [mem 0xf8302000-0xf83020ff] [ 0.248961] pci 0000:15:00.4: supports D1 D2 [ 0.248963] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248973] pci 0000:15:00.4: PME# disabled [ 0.248998] pci 0000:15:00.5: [1180:0852] type 0 class 0x000880 [ 0.249025] pci 0000:15:00.5: reg 10: [mem 0xf8302400-0xf83024ff] [ 0.249135] pci 0000:15:00.5: supports D1 D2 [ 0.249136] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249142] pci 0000:15:00.5: PME# disabled [ 0.249220] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.249225] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] [ 0.249230] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] [ 0.249238] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.249241] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.249243] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.249246] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.249248] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.249251] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.249253] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.249256] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.249258] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode) [ 0.249354] pci_bus 0000:00: on NUMA node 0 [ 0.249357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.249438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.249465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.249488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.249511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.249537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.249562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.249765] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.250031] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.254858] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.254918] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.254981] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.255040] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.255097] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.255155] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.255212] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.255269] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.255338] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.255353] vgaarb: loaded [ 0.255354] vgaarb: bridge control possible 0000:00:02.0 [ 0.255420] SCSI subsystem initialized [ 0.255427] libata version 3.00 loaded. [ 0.255427] usbcore: registered new interface driver usbfs [ 0.255427] usbcore: registered new interface driver hub [ 0.255427] usbcore: registered new device driver usb [ 0.255427] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.255427] PCI: Using ACPI for IRQ routing [ 0.258156] PCI: pci_cache_line_size set to 64 bytes [ 0.258310] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.258312] reserve RAM buffer: 00000000bf6b0000 - 00000000bfffffff [ 0.258392] Bluetooth: Core ver 2.16 [ 0.258400] NET: Registered protocol family 31 [ 0.258402] Bluetooth: HCI device and connection manager initialized [ 0.258404] Bluetooth: HCI socket layer initialized [ 0.258406] Bluetooth: L2CAP socket layer initialized [ 0.258410] Bluetooth: SCO socket layer initialized [ 0.258410] cfg80211: Calling CRDA to update world regulatory domain [ 0.258410] NetLabel: Initializing [ 0.258410] NetLabel: domain hash size = 128 [ 0.258410] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.258410] NetLabel: unlabeled traffic allowed by default [ 0.258410] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.258410] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.258410] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.262988] Switching to clocksource hpet [ 0.263832] Switched to NOHz mode on CPU #0 [ 0.263944] Switched to NOHz mode on CPU #1 [ 0.264213] pnp: PnP ACPI init [ 0.264221] ACPI: bus type pnp registered [ 0.264541] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.264543] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.264545] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.264547] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.264549] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.264551] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.264553] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 0.264555] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 0.264557] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled] [ 0.264559] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.264561] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.264563] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.264565] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.264566] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.264568] pnp 00:00: [mem 0x00100000-0xbfffffff] [ 0.264570] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.264574] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.264641] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.264644] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.264647] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.264650] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.264652] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.264655] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.264658] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.264660] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.264663] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.264666] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.264668] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.264671] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.264674] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.264676] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.264680] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.264699] pnp 00:01: [bus 00-ff] [ 0.264701] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.264703] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.264705] pnp 00:01: [io 0x0d00-0xffff window] [ 0.264707] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.264709] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.264711] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.264713] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.264716] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.264718] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.264720] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.264722] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.264724] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.264726] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.264728] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.264730] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.264732] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.264734] pnp 00:01: [mem 0xc0000000-0xfebfffff window] [ 0.264736] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.264778] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.264813] pnp 00:02: [io 0x0010-0x001f] [ 0.264815] pnp 00:02: [io 0x0090-0x009f] [ 0.264817] pnp 00:02: [io 0x0024-0x0025] [ 0.264819] pnp 00:02: [io 0x0028-0x0029] [ 0.264821] pnp 00:02: [io 0x002c-0x002d] [ 0.264822] pnp 00:02: [io 0x0030-0x0031] [ 0.264824] pnp 00:02: [io 0x0034-0x0035] [ 0.264826] pnp 00:02: [io 0x0038-0x0039] [ 0.264827] pnp 00:02: [io 0x003c-0x003d] [ 0.264829] pnp 00:02: [io 0x00a4-0x00a5] [ 0.264831] pnp 00:02: [io 0x00a8-0x00a9] [ 0.264833] pnp 00:02: [io 0x00ac-0x00ad] [ 0.264834] pnp 00:02: [io 0x00b0-0x00b5] [ 0.264836] pnp 00:02: [io 0x00b8-0x00b9] [ 0.264838] pnp 00:02: [io 0x00bc-0x00bd] [ 0.264840] pnp 00:02: [io 0x0050-0x0053] [ 0.264841] pnp 00:02: [io 0x0072-0x0077] [ 0.264843] pnp 00:02: [io 0x164e-0x164f] [ 0.264845] pnp 00:02: [io 0x002e-0x002f] [ 0.264847] pnp 00:02: [io 0x1000-0x107f] [ 0.264849] pnp 00:02: [io 0x1180-0x11bf] [ 0.264850] pnp 00:02: [io 0x0800-0x080f] [ 0.264854] pnp 00:02: [io 0x15e0-0x15ef] [ 0.264856] pnp 00:02: [io 0x1600-0x165f] [ 0.264857] pnp 00:02: [mem 0xf0000000-0xf3ffffff] [ 0.264859] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.264861] pnp 00:02: [mem 0xfed14000-0xfed17fff] [ 0.264863] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.264865] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.264867] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.264963] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.264966] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.264969] system 00:02: [io 0x1180-0x11bf] has been reserved [ 0.264972] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.264974] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.264977] system 00:02: [io 0x1600-0x165f] could not be reserved [ 0.264980] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.264983] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.264985] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.264988] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.264991] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.264994] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.264997] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.265042] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.265064] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.265073] pnp 00:04: [io 0x0000-0x000f] [ 0.265075] pnp 00:04: [io 0x0080-0x008f] [ 0.265076] pnp 00:04: [io 0x00c0-0x00df] [ 0.265079] pnp 00:04: [dma 4] [ 0.265102] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.265109] pnp 00:05: [io 0x0061] [ 0.265130] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.265140] pnp 00:06: [io 0x00f0] [ 0.265148] pnp 00:06: [irq 13] [ 0.265170] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.265178] pnp 00:07: [io 0x0070-0x0071] [ 0.265184] pnp 00:07: [irq 8] [ 0.265207] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.265215] pnp 00:08: [io 0x0060] [ 0.265217] pnp 00:08: [io 0x0064] [ 0.265222] pnp 00:08: [irq 1] [ 0.265244] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.265256] pnp 00:09: [irq 12] [ 0.265279] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) [ 0.265515] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled) [ 0.265732] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (disabled) [ 0.265896] pnp 00:0c: [mem 0xfed40000-0xfed44fff] [ 0.265922] pnp 00:0c: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active) [ 0.266426] pnp: PnP ACPI: found 13 devices [ 0.266428] ACPI: ACPI bus type pnp unregistered [ 0.270994] PCI: max bus depth: 2 pci_try_num: 3 [ 0.271066] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.271070] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.271077] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] [ 0.271083] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.271091] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.271094] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.271101] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff] [ 0.271106] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.271114] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.271117] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.271124] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] [ 0.271129] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.271137] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.271140] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.271146] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.271151] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.271159] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.271163] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.271169] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.271174] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.271185] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] [ 0.271189] pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff] [ 0.271192] pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff] [ 0.271194] pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff] [ 0.271197] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.271199] pci 0000:15:00.0: bridge window [io 0x7000-0x70ff] [ 0.271204] pci 0000:15:00.0: bridge window [io 0x7400-0x74ff] [ 0.271210] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.271216] pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff] [ 0.271222] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.271226] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] [ 0.271232] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] [ 0.271237] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.271256] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.271262] pci 0000:00:1c.0: setting latency timer to 64 [ 0.271272] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.271277] pci 0000:00:1c.1: setting latency timer to 64 [ 0.271287] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.271292] pci 0000:00:1c.2: setting latency timer to 64 [ 0.271303] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.271308] pci 0000:00:1c.3: setting latency timer to 64 [ 0.271316] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.271321] pci 0000:00:1c.4: setting latency timer to 64 [ 0.271326] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.271333] pci 0000:00:1e.0: setting latency timer to 64 [ 0.271344] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.271351] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.271353] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.271356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.271358] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.271360] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.271362] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.271364] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff] [ 0.271367] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff] [ 0.271369] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.271371] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff] [ 0.271374] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.271376] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.271378] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff] [ 0.271380] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.271383] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.271385] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff] [ 0.271387] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.271390] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.271392] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff] [ 0.271394] pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.271397] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff] [ 0.271399] pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.271401] pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.271403] pci_bus 0000:15: resource 0 [io 0x7000-0xafff] [ 0.271405] pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff] [ 0.271408] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.271410] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] [ 0.271412] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] [ 0.271414] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] [ 0.271417] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.271419] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.271421] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff] [ 0.271423] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff] [ 0.271425] pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff] [ 0.271428] pci_bus 0000:16: resource 0 [io 0x7000-0x70ff] [ 0.271430] pci_bus 0000:16: resource 1 [io 0x7400-0x74ff] [ 0.271432] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref] [ 0.271434] pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff] [ 0.271461] NET: Registered protocol family 2 [ 0.271505] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.271983] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.273987] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.274590] TCP: Hash tables configured (established 262144 bind 65536) [ 0.274593] TCP reno registered [ 0.274597] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.274639] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.274793] NET: Registered protocol family 1 [ 0.274818] pci 0000:00:02.0: Boot video device [ 0.274841] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.274843] pci 0000:00:1a.0: Performing full reset [ 0.274864] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.274866] pci 0000:00:1a.1: Performing full reset [ 0.274948] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.274950] pci 0000:00:1d.0: Performing full reset [ 0.274969] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.274971] pci 0000:00:1d.1: Performing full reset [ 0.274991] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.274992] pci 0000:00:1d.2: Performing full reset [ 0.275066] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.275099] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.275102] Placing 64MB software IO TLB between ffff8800bb6ab000 - ffff8800bf6ab000 [ 0.275104] software IO TLB at phys 0xbb6ab000 - 0xbf6ab000 [ 0.275121] Simple Boot Flag at 0x35 set to 0x1 [ 0.275431] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 0.275440] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 0.275457] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.275549] audit: initializing netlink socket (disabled) [ 0.275560] type=2000 audit(1313993136.274:1): initialized [ 0.289885] Btrfs loaded [ 0.289890] msgmni has been set to 7771 [ 0.290285] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.290289] io scheduler noop registered [ 0.290290] io scheduler deadline registered [ 0.290322] io scheduler cfq registered (default) [ 0.290426] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.290487] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.290591] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.290646] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.290750] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.290805] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.290905] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.290960] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.291078] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.291134] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.291258] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.291264] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.291285] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.291287] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.291292] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.291316] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.291321] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.291342] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.291347] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.291368] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.291373] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.291391] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.291447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.337155] serial 00:0a: [io 0x03f8-0x03ff] [ 0.337241] serial 00:0a: [irq 4] [ 0.337491] serial 00:0a: activated [ 0.358185] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.370067] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.390349] 0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A [ 0.402146] Non-volatile memory driver v1.3 [ 0.402245] Linux agpgart interface v0.103 [ 0.402310] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.402441] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.403368] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.403478] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.403563] intel_idle: MWAIT substates: 0x3122220 [ 0.403565] intel_idle: does not run on family 6 model 23 [ 0.403886] ACPI: AC Adapter [AC] (on-line) [ 0.404023] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.404254] ACPI: Lid Switch [LID] [ 0.404289] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.404294] ACPI: Sleep Button [SLPB] [ 0.404345] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.404349] ACPI: Power Button [PWRF] [ 0.404380] ACPI: acpi_idle registered with cpuidle [ 0.406074] Monitor-Mwait will be used to enter C-1 state [ 0.406107] Monitor-Mwait will be used to enter C-2 state [ 0.406140] Monitor-Mwait will be used to enter C-3 state [ 0.432583] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.432586] ACPI: Thermal Zone [THM0] (41 C) [ 0.433394] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.433397] ACPI: Thermal Zone [THM1] (26 C) [ 0.433442] [drm] Initialized drm 1.1.0 20060810 [ 0.433464] i915 0000:00:02.0: power state changed by ACPI to D0 [ 0.433468] i915 0000:00:02.0: power state changed by ACPI to D0 [ 0.433474] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.433483] i915 0000:00:02.0: setting latency timer to 64 [ 0.446153] ACPI: Battery Slot [BAT0] (battery present) [ 0.495616] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 0.495618] [drm] MTRR allocation failed. Graphics performance may suffer. [ 0.495826] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 0.495831] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.495833] [drm] Driver supports precise vblank timestamp query. [ 0.495869] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.712123] [drm] initialized overlay support [ 0.867081] fbcon: inteldrmfb (fb0) is primary device [ 1.081224] Console: switching to colour frame buffer device 160x50 [ 1.083865] fb0: inteldrmfb frame buffer device [ 1.083866] drm: registered panic notifier [ 1.094253] acpi device:02: registered as cooling_device2 [ 1.094329] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.094335] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.094371] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.094491] ahci 0000:00:1f.2: version 3.0 [ 1.094502] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.094552] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 1.094606] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode [ 1.094610] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 1.094615] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.094894] scsi0 : ahci [ 1.094968] scsi1 : ahci [ 1.095040] scsi2 : ahci [ 1.095112] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 46 [ 1.095114] ata2: DUMMY [ 1.095115] ata3: DUMMY [ 1.095162] ata_piix 0000:00:1f.1: version 2.13 [ 1.095170] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 1.095202] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.095421] scsi3 : ata_piix [ 1.095479] scsi4 : ata_piix [ 1.095731] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 [ 1.095734] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 [ 1.095763] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 1.095765] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.095781] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.095790] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.095806] ata5: port disabled. ignoring. [ 1.095920] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 1.250464] ata4.00: ATAPI: MATSHITADVD-RAM UJ-822S, 1.61, max UDMA/33 [ 1.256341] ata4.00: configured for UDMA/33 [ 1.400026] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.400986] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.400990] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.400994] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.410058] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:21:86:52:b0:a9 [ 1.410061] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.410085] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008FF-0FF [ 1.410107] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 1.410109] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 1.410153] iwl4965 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.410161] iwl4965 0000:03:00.0: setting latency timer to 64 [ 1.410179] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 1.439446] ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133 [ 1.439448] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.441443] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.441446] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.441450] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.443175] ata1.00: configured for UDMA/133 [ 1.443262] scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5 [ 1.443372] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.443518] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.443557] sd 0:0:0:0: [sda] Write Protect is off [ 1.443560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.443577] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.445169] sda: sda1 sda2 sda3 [ 1.445344] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.445455] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.61 PQ: 0 ANSI: 5 [ 1.447535] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.447538] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.447605] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.447646] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.449091] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 1.449105] iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 1.449206] iwl4965 0000:03:00.0: irq 48 for MSI/MSI-X [ 1.449371] console [netcon0] enabled [ 1.449373] netconsole: network logging started [ 1.449374] usbmon: debugfs is not available [ 1.449376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.449379] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 1.449393] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1.449398] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1.449405] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.449418] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.449422] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.449439] drivers/usb/core/inode.c: creating file 'devices' [ 1.449443] drivers/usb/core/inode.c: creating file '001' [ 1.449446] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.449458] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 [ 1.449463] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 1.449488] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.453385] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.453387] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 1.453401] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 1.453406] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.457287] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.463017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.463045] usb usb1: default language 0x0409 [ 1.463051] usb usb1: udev 1, busnum 1, minor = 0 [ 1.463053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.463056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.463058] usb usb1: Product: EHCI Host Controller [ 1.463060] usb usb1: Manufacturer: Linux 3.0.3-gentoo ehci_hcd [ 1.463062] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.463120] usb usb1: usb_probe_device [ 1.463124] usb usb1: configuration #1 chosen from 1 choice [ 1.463131] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.463149] hub 1-0:1.0: usb_probe_interface [ 1.463151] hub 1-0:1.0: usb_probe_interface - got id [ 1.463154] hub 1-0:1.0: USB hub found [ 1.463158] hub 1-0:1.0: 4 ports detected [ 1.463160] hub 1-0:1.0: standalone hub [ 1.463161] hub 1-0:1.0: no power switching (usb 1.0) [ 1.463163] hub 1-0:1.0: individual port over-current protection [ 1.463165] hub 1-0:1.0: power on to power good time: 20ms [ 1.463169] hub 1-0:1.0: local power source is good [ 1.463171] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.463196] drivers/usb/core/inode.c: creating file '001' [ 1.463235] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1.463240] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1.463250] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.463262] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.463265] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.463270] drivers/usb/core/inode.c: creating file '002' [ 1.463274] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.463282] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 1.463287] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 1.463311] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.463315] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.467209] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.467211] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 1.467228] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 1.467233] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.471110] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.477017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.477026] usb usb2: default language 0x0409 [ 1.477032] usb usb2: udev 1, busnum 2, minor = 128 [ 1.477034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.477036] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.477038] usb usb2: Product: EHCI Host Controller [ 1.477040] usb usb2: Manufacturer: Linux 3.0.3-gentoo ehci_hcd [ 1.477042] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.477098] usb usb2: usb_probe_device [ 1.477100] usb usb2: configuration #1 chosen from 1 choice [ 1.477106] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.477125] hub 2-0:1.0: usb_probe_interface [ 1.477127] hub 2-0:1.0: usb_probe_interface - got id [ 1.477129] hub 2-0:1.0: USB hub found [ 1.477133] hub 2-0:1.0: 6 ports detected [ 1.477134] hub 2-0:1.0: standalone hub [ 1.477136] hub 2-0:1.0: no power switching (usb 1.0) [ 1.477138] hub 2-0:1.0: individual port over-current protection [ 1.477140] hub 2-0:1.0: power on to power good time: 20ms [ 1.477143] hub 2-0:1.0: local power source is good [ 1.477145] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.477173] drivers/usb/core/inode.c: creating file '001' [ 1.477212] uhci_hcd: USB Universal Host Controller Interface driver [ 1.477238] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.477245] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.477248] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.477253] drivers/usb/core/inode.c: creating file '003' [ 1.477260] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.477269] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.477274] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.477276] uhci_hcd 0000:00:1a.0: Performing full reset [ 1.477290] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 1.477304] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 1.477336] usb usb3: default language 0x0409 [ 1.477341] usb usb3: udev 1, busnum 3, minor = 256 [ 1.477343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.477346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.477348] usb usb3: Product: UHCI Host Controller [ 1.477350] usb usb3: Manufacturer: Linux 3.0.3-gentoo uhci_hcd [ 1.477351] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.477401] usb usb3: usb_probe_device [ 1.477404] usb usb3: configuration #1 chosen from 1 choice [ 1.477409] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.477428] hub 3-0:1.0: usb_probe_interface [ 1.477430] hub 3-0:1.0: usb_probe_interface - got id [ 1.477432] hub 3-0:1.0: USB hub found [ 1.477437] hub 3-0:1.0: 2 ports detected [ 1.477439] hub 3-0:1.0: standalone hub [ 1.477441] hub 3-0:1.0: no power switching (usb 1.0) [ 1.477442] hub 3-0:1.0: individual port over-current protection [ 1.477444] hub 3-0:1.0: power on to power good time: 2ms [ 1.477448] hub 3-0:1.0: local power source is good [ 1.477449] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.477462] drivers/usb/core/inode.c: creating file '001' [ 1.477487] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 1.477505] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 1.477508] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 1.477513] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.477519] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.477522] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.477529] drivers/usb/core/inode.c: creating file '004' [ 1.477532] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.477539] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.477544] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.477546] uhci_hcd 0000:00:1a.1: Performing full reset [ 1.477560] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 1.477573] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 1.477603] usb usb4: default language 0x0409 [ 1.477608] usb usb4: udev 1, busnum 4, minor = 384 [ 1.477610] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.477613] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.477615] usb usb4: Product: UHCI Host Controller [ 1.477617] usb usb4: Manufacturer: Linux 3.0.3-gentoo uhci_hcd [ 1.477619] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.477670] usb usb4: usb_probe_device [ 1.477673] usb usb4: configuration #1 chosen from 1 choice [ 1.477679] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.477695] hub 4-0:1.0: usb_probe_interface [ 1.477697] hub 4-0:1.0: usb_probe_interface - got id [ 1.477699] hub 4-0:1.0: USB hub found [ 1.477703] hub 4-0:1.0: 2 ports detected [ 1.477704] hub 4-0:1.0: standalone hub [ 1.477706] hub 4-0:1.0: no power switching (usb 1.0) [ 1.477708] hub 4-0:1.0: individual port over-current protection [ 1.477710] hub 4-0:1.0: power on to power good time: 2ms [ 1.477713] hub 4-0:1.0: local power source is good [ 1.477715] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.477727] drivers/usb/core/inode.c: creating file '001' [ 1.477752] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 1.477774] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.477776] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.477781] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.477788] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.477791] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.477795] drivers/usb/core/inode.c: creating file '005' [ 1.477799] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.477806] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.477810] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.477812] uhci_hcd 0000:00:1d.0: Performing full reset [ 1.477826] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 1.477841] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 1.477871] usb usb5: default language 0x0409 [ 1.477877] usb usb5: udev 1, busnum 5, minor = 512 [ 1.477879] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.477881] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.477883] usb usb5: Product: UHCI Host Controller [ 1.477885] usb usb5: Manufacturer: Linux 3.0.3-gentoo uhci_hcd [ 1.477887] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.477936] usb usb5: usb_probe_device [ 1.477939] usb usb5: configuration #1 chosen from 1 choice [ 1.477944] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.477961] hub 5-0:1.0: usb_probe_interface [ 1.477963] hub 5-0:1.0: usb_probe_interface - got id [ 1.477965] hub 5-0:1.0: USB hub found [ 1.477968] hub 5-0:1.0: 2 ports detected [ 1.477970] hub 5-0:1.0: standalone hub [ 1.477972] hub 5-0:1.0: no power switching (usb 1.0) [ 1.477973] hub 5-0:1.0: individual port over-current protection [ 1.477975] hub 5-0:1.0: power on to power good time: 2ms [ 1.477979] hub 5-0:1.0: local power source is good [ 1.477981] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.477993] drivers/usb/core/inode.c: creating file '001' [ 1.478035] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 1.478051] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.478057] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.478061] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.478065] drivers/usb/core/inode.c: creating file '006' [ 1.478069] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.478076] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.478081] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.478083] uhci_hcd 0000:00:1d.1: Performing full reset [ 1.478096] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 1.478110] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 1.478138] usb usb6: default language 0x0409 [ 1.478144] usb usb6: udev 1, busnum 6, minor = 640 [ 1.478146] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.478148] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.478150] usb usb6: Product: UHCI Host Controller [ 1.478152] usb usb6: Manufacturer: Linux 3.0.3-gentoo uhci_hcd [ 1.478154] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.478205] usb usb6: usb_probe_device [ 1.478207] usb usb6: configuration #1 chosen from 1 choice [ 1.478213] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.478230] hub 6-0:1.0: usb_probe_interface [ 1.478232] hub 6-0:1.0: usb_probe_interface - got id [ 1.478234] hub 6-0:1.0: USB hub found [ 1.478237] hub 6-0:1.0: 2 ports detected [ 1.478239] hub 6-0:1.0: standalone hub [ 1.478241] hub 6-0:1.0: no power switching (usb 1.0) [ 1.478242] hub 6-0:1.0: individual port over-current protection [ 1.478244] hub 6-0:1.0: power on to power good time: 2ms [ 1.478248] hub 6-0:1.0: local power source is good [ 1.478250] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.478262] drivers/usb/core/inode.c: creating file '001' [ 1.478292] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 1.478306] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 1.478309] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 1.478318] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.478324] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.478328] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.478332] drivers/usb/core/inode.c: creating file '007' [ 1.478336] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.478344] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.478349] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.478351] uhci_hcd 0000:00:1d.2: Performing full reset [ 1.478365] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 1.478378] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 1.478407] usb usb7: default language 0x0409 [ 1.478412] usb usb7: udev 1, busnum 7, minor = 768 [ 1.478414] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.478416] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.478419] usb usb7: Product: UHCI Host Controller [ 1.478421] usb usb7: Manufacturer: Linux 3.0.3-gentoo uhci_hcd [ 1.478423] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.478475] usb usb7: usb_probe_device [ 1.478477] usb usb7: configuration #1 chosen from 1 choice [ 1.478483] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.478500] hub 7-0:1.0: usb_probe_interface [ 1.478501] hub 7-0:1.0: usb_probe_interface - got id [ 1.478504] hub 7-0:1.0: USB hub found [ 1.478507] hub 7-0:1.0: 2 ports detected [ 1.478508] hub 7-0:1.0: standalone hub [ 1.478510] hub 7-0:1.0: no power switching (usb 1.0) [ 1.478512] hub 7-0:1.0: individual port over-current protection [ 1.478514] hub 7-0:1.0: power on to power good time: 2ms [ 1.478517] hub 7-0:1.0: local power source is good [ 1.478519] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.478531] drivers/usb/core/inode.c: creating file '001' [ 1.478562] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 1.478581] Initializing USB Mass Storage driver... [ 1.478610] usbcore: registered new interface driver usb-storage [ 1.478611] USB Mass Storage support registered. [ 1.478638] usbcore: registered new interface driver libusual [ 1.478689] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.486704] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.486729] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.486787] mousedev: PS/2 mouse device common for all mice [ 1.486961] rtc_cmos 00:07: RTC can wake from S4 [ 1.487078] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.487108] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.487134] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.487229] cpuidle: using governor ladder [ 1.487307] cpuidle: using governor menu [ 1.487315] sdhci: Secure Digital Host Controller Interface driver [ 1.487316] sdhci: Copyright(c) Pierre Ossman [ 1.487330] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 1.487343] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.488367] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.488374] sdhci-pci 0000:15:00.2: setting latency timer to 64 [ 1.489401] Registered led device: mmc0:: [ 1.490439] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 1.490455] sdhci-pci 0000:15:00.3: SDHCI controller found [1180:0843] (rev 11) [ 1.490469] sdhci-pci 0000:15:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.490485] sdhci-pci 0000:15:00.3: setting latency timer to 64 [ 1.490508] Registered led device: mmc1:: [ 1.490527] mmc1: SDHCI controller on PCI [0000:15:00.3] using DMA [ 1.490694] usbcore: registered new interface driver usbhid [ 1.490695] usbhid: USB HID core driver [ 1.490784] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 1.490785] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 1.490787] thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08 [ 1.490789] thinkpad_acpi: Lenovo ThinkPad T61, model 64669YG [ 1.491087] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 1.491832] thinkpad_acpi: ACPI backlight control delay disabled [ 1.491983] thinkpad_acpi: radio switch found; radios are enabled [ 1.492328] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.564257] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.564264] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.564277] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.564282] hub 1-0:1.0: port 2: status 0501 change 0001 [ 1.564297] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.564302] hub 1-0:1.0: port 4: status 0501 change 0001 [ 1.577108] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 1.577118] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00 [ 1.577124] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.577135] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00 [ 1.577168] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.581090] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.581094] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.664093] hub 1-0:1.0: state 7 ports 4 chg 0016 evt 0000 [ 1.664100] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.715315] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion [ 1.715319] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 1.715322] hub 1-0:1.0: port 1 not reset yet, waiting 50ms [ 1.766084] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.766105] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.817313] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion [ 1.817317] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 1.817320] hub 1-0:1.0: port 2 not reset yet, waiting 50ms [ 1.868056] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.868089] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 1.919313] ehci_hcd 0000:00:1a.7: port 4 high speed [ 1.919316] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.970036] usb 1-4: new high speed USB device number 4 using ehci_hcd [ 1.994163] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 1.994645] Registered led device: tpacpi::thinklight [ 1.994669] Registered led device: tpacpi::power [ 1.994682] Registered led device: tpacpi::standby [ 1.994695] Registered led device: tpacpi::thinkvantage [ 1.996800] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 1.996874] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 1.997861] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 1.997946] hdaps: inverting axis (3) readings [ 1.997948] hdaps: LENOVO ThinkPad T61 detected [ 1.998857] input: hdaps as /devices/platform/hdaps/input/input6 [ 1.998885] hdaps: driver successfully loaded [ 1.998900] intel_oaktrail: Platform not recognized (You could try the module's force-parameter) [ 1.999031] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.999039] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 1.999093] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 1.999120] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2.021314] ehci_hcd 0000:00:1a.7: port 4 high speed [ 2.021319] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.084476] usb 1-4: udev 4, busnum 1, minor = 3 [ 2.084479] usb 1-4: New USB device found, idVendor=04b3, idProduct=4486 [ 2.084481] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.084529] usb 1-4: usb_probe_device [ 2.084532] usb 1-4: configuration #1 chosen from 1 choice [ 2.084595] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 2.084616] hub 1-4:1.0: usb_probe_interface [ 2.084618] hub 1-4:1.0: usb_probe_interface - got id [ 2.084626] hub 1-4:1.0: USB hub found [ 2.084712] hub 1-4:1.0: 7 ports detected [ 2.084715] hub 1-4:1.0: standalone hub [ 2.084718] hub 1-4:1.0: individual port power switching [ 2.084721] hub 1-4:1.0: individual port over-current protection [ 2.084862] hub 1-4:1.0: TT per port [ 2.084866] hub 1-4:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.084870] hub 1-4:1.0: power on to power good time: 100ms [ 2.085097] hub 1-4:1.0: local power source is good [ 2.085101] hub 1-4:1.0: enabling power on all ports [ 2.085969] drivers/usb/core/inode.c: creating file '004' [ 2.085998] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 2.086024] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00 [ 2.086034] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 2.163732] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0 [ 2.163741] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.185848] hub 1-4:1.0: port 6: status 0101 change 0001 [ 2.190065] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 2.203428] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.286073] usb 1-4: link qh256-0001/ffff880136e98780 start 1 [1/0 us] [ 2.292041] usb 3-1: new full speed USB device number 2 using uhci_hcd [ 2.369464] usbcore: registered new interface driver snd-usb-audio [ 2.369466] ALSA device list: [ 2.369468] #0: HDA Intel at 0xfe020000 irq 49 [ 2.369470] #29: ThinkPad Console Audio Control at EC reg 0x30, fw 7KHT24WW-1.08 [ 2.369502] Netfilter messages via NETLINK v0.30. [ 2.369517] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.369682] ctnetlink v0.93: registering with nfnetlink. [ 2.370084] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.370119] TCP cubic registered [ 2.370120] Initializing XFRM netlink socket [ 2.370231] NET: Registered protocol family 10 [ 2.370806] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.370847] IPv6 over IPv4 tunneling driver [ 2.371271] NET: Registered protocol family 17 [ 2.371337] Bluetooth: RFCOMM socket layer initialized [ 2.371339] Bluetooth: RFCOMM ver 1.11 [ 2.371341] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.371343] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.432373] usb 3-1: skipped 1 descriptor after interface [ 2.435371] usb 3-1: default language 0x0409 [ 2.445360] usb 3-1: udev 2, busnum 3, minor = 257 [ 2.445362] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110 [ 2.445365] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.445367] usb 3-1: Product: BCM2045B [ 2.445369] usb 3-1: Manufacturer: Broadcom Corp [ 2.445420] usb 3-1: usb_probe_device [ 2.445423] usb 3-1: configuration #1 chosen from 1 choice [ 2.447378] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 2.447427] usb 3-1: adding 3-1:1.1 (config #1, interface 1) [ 2.447467] usb 3-1: adding 3-1:1.2 (config #1, interface 2) [ 2.447511] usb 3-1: adding 3-1:1.3 (config #1, interface 3) [ 2.447531] drivers/usb/core/inode.c: creating file '002' [ 2.447558] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00 [ 2.447566] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 2.551095] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 2.653091] usb 3-2: new full speed USB device number 3 using uhci_hcd [ 2.704073] usb usb5: suspend_rh (auto-stop) [ 2.704105] usb usb6: suspend_rh (auto-stop) [ 2.704135] usb usb7: suspend_rh (auto-stop) [ 2.704177] usb usb4: suspend_rh (auto-stop) [ 2.773072] usb 3-2: ep0 maxpacket = 8 [ 2.794379] usb 3-2: default language 0x0409 [ 2.813381] usb 3-2: udev 3, busnum 3, minor = 258 [ 2.813387] usb 3-2: New USB device found, idVendor=0483, idProduct=2016 [ 2.813393] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.813398] usb 3-2: Product: Biometric Coprocessor [ 2.813403] usb 3-2: Manufacturer: STMicroelectronics [ 2.813518] usb 3-2: usb_probe_device [ 2.813525] usb 3-2: configuration #1 chosen from 1 choice [ 2.815398] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 2.815523] drivers/usb/core/inode.c: creating file '003' [ 2.815563] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.815576] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004 [ 2.815592] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 2.815607] hub 1-4:1.0: state 7 ports 7 chg 0040 evt 0000 [ 2.815879] hub 1-4:1.0: port 6, status 0101, change 0000, 12 Mb/s [ 2.826239] hub 1-4:1.0: port 6 not reset yet, waiting 10ms [ 2.888248] usb 1-4.6: new high speed USB device number 5 using ehci_hcd [ 2.899237] hub 1-4:1.0: port 6 not reset yet, waiting 10ms [ 2.974237] usb 1-4.6: default language 0x0409 [ 2.974614] usb 1-4.6: udev 5, busnum 1, minor = 4 [ 2.974620] usb 1-4.6: New USB device found, idVendor=05e3, idProduct=0608 [ 2.974626] usb 1-4.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.974632] usb 1-4.6: Product: USB2.0 Hub [ 2.974744] usb 1-4.6: usb_probe_device [ 2.974751] usb 1-4.6: configuration #1 chosen from 1 choice [ 2.974999] usb 1-4.6: adding 1-4.6:1.0 (config #1, interface 0) [ 2.975071] hub 1-4.6:1.0: usb_probe_interface [ 2.975076] hub 1-4.6:1.0: usb_probe_interface - got id [ 2.975083] hub 1-4.6:1.0: USB hub found [ 2.975362] hub 1-4.6:1.0: 4 ports detected [ 2.975368] hub 1-4.6:1.0: standalone hub [ 2.975372] hub 1-4.6:1.0: ganged power switching [ 2.975377] hub 1-4.6:1.0: global over-current protection [ 2.975381] hub 1-4.6:1.0: Single TT [ 2.975386] hub 1-4.6:1.0: TT requires at most 32 FS bit times (2664 ns) [ 2.975391] hub 1-4.6:1.0: Port indicators are supported [ 2.975397] hub 1-4.6:1.0: power on to power good time: 100ms [ 2.975857] hub 1-4.6:1.0: local power source is good [ 2.975863] hub 1-4.6:1.0: no over-current condition exists [ 2.975868] hub 1-4.6:1.0: enabling power on all ports [ 2.977387] drivers/usb/core/inode.c: creating file '005' [ 3.077373] hub 1-4.6:1.0: port 1: status 0301 change 0001 [ 3.078623] hub 1-4.6:1.0: port 4: status 0301 change 0001 [ 3.178127] usb 1-4.6: link qh256-0001/ffff880136f4c200 start 2 [1/0 us] [ 3.178171] hub 1-4.6:1.0: state 7 ports 4 chg 0012 evt 0000 [ 3.178499] hub 1-4.6:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 3.241373] usb 1-4.6.1: new low speed USB device number 6 using ehci_hcd [ 3.253498] hub 1-4.6:1.0: port 1 not reset yet, waiting 10ms [ 3.329992] usb 1-4.6.1: skipped 1 descriptor after interface [ 3.330001] usb 1-4.6.1: udev 6, busnum 1, minor = 5 [ 3.330021] usb 1-4.6.1: New USB device found, idVendor=04b3, idProduct=3107 [ 3.330028] usb 1-4.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.330147] usb 1-4.6.1: usb_probe_device [ 3.330154] usb 1-4.6.1: configuration #1 chosen from 1 choice [ 3.330609] usb 1-4.6.1: adding 1-4.6.1:1.0 (config #1, interface 0) [ 3.330675] usbhid 1-4.6.1:1.0: usb_probe_interface [ 3.330680] usbhid 1-4.6.1:1.0: usb_probe_interface - got id [ 3.333316] input: HID 04b3:3107 as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.6/1-4.6.1/1-4.6.1:1.0/input/input8 [ 3.333498] generic-usb 0003:04B3:3107.0001: input,hidraw0: USB HID v11.10 Mouse [HID 04b3:3107] on usb-0000:00:1a.7-4.6.1/input0 [ 3.333540] drivers/usb/core/inode.c: creating file '006' [ 3.333862] hub 1-4.6:1.0: port 4, status 0301, change 0000, 1.5 Mb/s [ 3.345505] hub 1-4.6:1.0: port 4 not reset yet, waiting 10ms [ 3.407374] usb 1-4.6.4: new low speed USB device number 7 using ehci_hcd [ 3.420363] hub 1-4.6:1.0: port 4 not reset yet, waiting 10ms [ 3.505238] usb 1-4.6.4: skipped 1 descriptor after interface [ 3.505245] usb 1-4.6.4: skipped 1 descriptor after interface [ 3.506238] usb 1-4.6.4: default language 0x0409 [ 3.510239] usb 1-4.6.4: udev 7, busnum 1, minor = 6 [ 3.510246] usb 1-4.6.4: New USB device found, idVendor=04d9, idProduct=2013 [ 3.510252] usb 1-4.6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.510258] usb 1-4.6.4: Product: USB Keyboard [ 3.510263] usb 1-4.6.4: Manufacturer: [ 3.510375] usb 1-4.6.4: usb_probe_device [ 3.510381] usb 1-4.6.4: configuration #1 chosen from 1 choice [ 3.511020] usb 1-4.6.4: adding 1-4.6.4:1.0 (config #1, interface 0) [ 3.511087] usbhid 1-4.6.4:1.0: usb_probe_interface [ 3.511093] usbhid 1-4.6.4:1.0: usb_probe_interface - got id [ 3.518988] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.6/1-4.6.4/1-4.6.4:1.0/input/input9 [ 3.519040] usb 1-4.6.4: link qh16-0e01/ffff880136ee6600 start 3 [1/2 us] [ 3.519170] generic-usb 0003:04D9:2013.0002: input,hidraw1: USB HID v1.00 Keyboard [ USB Keyboard] on usb-0000:00:1a.7-4.6.4/input0 [ 3.519207] usb 1-4.6.4: adding 1-4.6.4:1.1 (config #1, interface 1) [ 3.519270] usbhid 1-4.6.4:1.1: usb_probe_interface [ 3.519275] usbhid 1-4.6.4:1.1: usb_probe_interface - got id [ 3.532677] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.6/1-4.6.4/1-4.6.4:1.1/input/input10 [ 3.532708] usb 1-4.6.4: link qh16-0e01/ffff880136f4c480 start 4 [1/2 us] [ 3.532828] generic-usb 0003:04D9:2013.0003: input,hidraw2: USB HID v1.00 Device [ USB Keyboard] on usb-0000:00:1a.7-4.6.4/input1 [ 3.532867] drivers/usb/core/inode.c: creating file '007' [ 3.704070] hub 2-0:1.0: hub_suspend [ 3.704081] usb usb2: bus auto-suspend [ 3.704086] ehci_hcd 0000:00:1d.7: suspend root hub [ 3.704120] hub 5-0:1.0: hub_suspend [ 3.704127] usb usb5: bus auto-suspend [ 3.704132] usb usb5: suspend_rh [ 3.704154] hub 6-0:1.0: hub_suspend [ 3.704161] usb usb6: bus auto-suspend [ 3.704165] usb usb6: suspend_rh [ 3.704185] hub 7-0:1.0: hub_suspend [ 3.704192] usb usb7: bus auto-suspend [ 3.704196] usb usb7: suspend_rh [ 4.815075] hub 4-0:1.0: hub_suspend [ 4.815086] usb usb4: bus auto-suspend [ 4.815091] usb usb4: suspend_rh [ 7.491129] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.712467] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 [ 7.849580] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities [ 7.859367] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities [ 7.922536] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 7.922545] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 7.922648] Freeing unused kernel memory: 500k freed [ 9.212097] systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX -SYSVINIT -LIBCRYPTSETUP; gentoo) [ 9.248264] systemd[1]: Set hostname to . [ 10.510170] udevd[61]: starting version 171 [ 11.686777] fuse init (API version 7.16) [ 11.759285] vboxdrv: Found 2 processor cores. [ 11.759358] VBoxDrv: dbg - g_abExecMemory=ffffffffa0035540 [ 11.759394] vboxdrv: fAsync=1 offMin=0x10864f offMax=0x10864f [ 11.759456] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 11.759458] vboxdrv: Successfully loaded version 4.1.2 (interface 0x00190000). [ 12.682189] systemd-fsck[73]: /dev/sda3 has been mounted 30 times without being checked, check forced. [ 13.446874] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24 [ 13.447099] Registered led device: phy0-led [ 13.447159] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 15.290588] Adding 8393956k swap on /dev/sda2. Priority:0 extents:1 across:8393956k [ 36.864096] systemd-fsck[73]: /dev/sda3: 592619/18882560 files (0.2% non-contiguous), 19309503/75517548 blocks [ 36.952609] EXT4-fs (sda3): re-mounted. Opts: (null) [ 37.520617] fcron[398]: fcron[398] 3.0.6 started [ 37.520667] fcron[398]: updating configuration from /var/spool/fcron [ 37.520747] fcron[398]: adding file horn [ 37.538746] fcron[398]: adding file root [ 37.599061] usb 1-4.6.1: link qh8-0e01/ffff880130c6d400 start 5 [1/2 us] [ 37.603054] usb 1-4.6.1: unlink qh8-0e01/ffff880130c6d400 start 5 [1/2 us] [ 37.606334] acpid[400]: starting up with netlink and the input layer [ 37.659478] ntpd[394]: ntpd 4.2.6p3@1.2290-o Fri Jul 22 22:54:18 UTC 2011 (1) [ 37.659625] ntpd[394]: proto: precision = 0.628 usec [ 37.675681] ntpd[394]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123 [ 37.789949] acpid[400]: 1 rule loaded [ 37.789958] acpid[400]: waiting for events: event logging is off [ 38.619117] NetworkManager[397]: NetworkManager (version 0.8.9997) is starting... [ 38.619126] NetworkManager[397]: Read config file /etc/NetworkManager/nm-system-settings.conf [ 38.706171] ntpd[394]: Listen and drop on 1 v6wildcard :: UDP 123 [ 38.706264] ntpd[394]: Listen normally on 2 lo 127.0.0.1 UDP 123 [ 38.706320] ntpd[394]: Listen normally on 3 lo ::1 UDP 123 [ 38.706326] ntpd[394]: peers refreshed [ 39.041465] ntpd[394]: Deferring DNS for 0.gentoo.pool.ntp.org 1 [ 39.041753] ntpd[394]: Deferring DNS for 1.gentoo.pool.ntp.org 1 [ 39.041976] ntpd[394]: Deferring DNS for 2.gentoo.pool.ntp.org 1 [ 39.042230] ntpd[394]: Deferring DNS for 3.gentoo.pool.ntp.org 1 [ 39.042573] ntpd[420]: signal_no_reset: signal 17 had flags 4000000 [ 39.563248] NetworkManager[397]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. [ 39.563555] NetworkManager[397]: keyfile: parsing Auto tsdhNET ... [ 39.592966] NetworkManager[397]: keyfile: read connection 'Auto tsdhNET' [ 39.592974] NetworkManager[397]: keyfile: parsing .keep_net-misc_networkmanager-0 ... [ 39.592980] NetworkManager[397]: keyfile: error: File permissions (100644) or owner (0) were insecure [ 39.609864] NetworkManager[397]: trying to start the modem manager... [ 39.801446] NetworkManager[397]: monitoring kernel firmware directory '/lib/firmware'. [ 39.802592] NetworkManager[397]: found WiFi radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill1) (driver (unknown)) [ 39.803611] systemd[1]: Startup finished in 9s 297ms 48us (kernel) + 30s 506ms 418us (userspace) = 39s 803ms 466us. [ 39.803709] NetworkManager[397]: WiFi enabled by radio killswitch; enabled by state file [ 39.803735] NetworkManager[397]: WWAN enabled by radio killswitch; enabled by state file [ 39.803751] NetworkManager[397]: WiMAX enabled by radio killswitch; enabled by state file [ 39.803772] NetworkManager[397]: Networking is enabled by state file [ 39.804777] NetworkManager[397]: (eth0): carrier is OFF [ 39.804869] NetworkManager[397]: (eth0): new Ethernet device (driver: 'e1000e' ifindex: 2) [ 39.804901] NetworkManager[397]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/0 [ 39.804925] NetworkManager[397]: (eth0): now managed [ 39.804948] NetworkManager[397]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] [ 39.804969] NetworkManager[397]: (eth0): bringing up device. [ 40.169186] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 40.220133] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 40.220652] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.220805] NetworkManager[397]: (eth0): preparing device. [ 40.220813] NetworkManager[397]: (eth0): deactivating device (reason: 2). [ 40.222149] NetworkManager[397]: Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:19.0/net/eth0 [ 40.231096] NetworkManager[397]: (wlan0): driver supports SSID scans (scan_capa 0x01). [ 40.231222] NetworkManager[397]: (wlan0): new 802.11 WiFi device (driver: 'iwl4965' ifindex: 4) [ 40.231261] NetworkManager[397]: (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 [ 40.231267] NetworkManager[397]: (wlan0): now managed [ 40.231274] NetworkManager[397]: (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] [ 40.231304] NetworkManager[397]: (wlan0): bringing up device. [ 40.469945] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.471120] NetworkManager[397]: (wlan0): preparing device. [ 40.471212] NetworkManager[397]: (wlan0): deactivating device (reason: 2). [ 40.472939] NetworkManager[397]: NetworkManager is running with systemd... [ 40.474307] NetworkManager[397]: modem-manager is now available [ 40.474819] NetworkManager[397]: bluez error getting default adapter: The name org.bluez was not provided by any .service files [ 40.506976] NetworkManager[397]: wpa_supplicant started [ 40.526934] NetworkManager[397]: (wlan0): supplicant interface state: starting -> ready [ 40.526957] NetworkManager[397]: (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] [ 40.527791] NetworkManager[397]: (wlan0): supplicant interface state: ready -> inactive [ 41.043710] ntpd_intres[420]: host name not found: 0.gentoo.pool.ntp.org [ 41.044497] ntpd_intres[420]: host name not found: 1.gentoo.pool.ntp.org [ 41.044537] ntpd_intres[420]: host name not found: 2.gentoo.pool.ntp.org [ 41.044576] ntpd_intres[420]: host name not found: 3.gentoo.pool.ntp.org [ 41.545025] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 41.545035] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 41.546149] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.546556] NetworkManager[397]: (eth0): carrier now ON (device state 20) [ 41.546577] NetworkManager[397]: (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] [ 41.547450] NetworkManager[397]: Activation (eth0) starting connection 'Wired connection 1' [ 41.547469] NetworkManager[397]: (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] [ 41.547674] NetworkManager[397]: Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... [ 41.548111] NetworkManager[397]: Activation (eth0) Stage 1 of 5 (Device Prepare) started... [ 41.548151] NetworkManager[397]: Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... [ 41.548168] NetworkManager[397]: Activation (eth0) Stage 1 of 5 (Device Prepare) complete. [ 41.548210] NetworkManager[397]: Activation (eth0) Stage 2 of 5 (Device Configure) starting... [ 41.548227] NetworkManager[397]: (eth0): device state change: prepare -> config (reason 'none') [40 50 0] [ 41.548466] NetworkManager[397]: Activation (eth0) Stage 2 of 5 (Device Configure) successful. [ 41.548484] NetworkManager[397]: Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. [ 41.548500] NetworkManager[397]: Activation (eth0) Stage 2 of 5 (Device Configure) complete. [ 41.548650] NetworkManager[397]: Activation (eth0) Stage 3 of 5 (IP Configure Start) started... [ 41.548668] NetworkManager[397]: (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] [ 41.549127] NetworkManager[397]: Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) [ 41.580079] NetworkManager[397]: dhcpcd started with pid 430 [ 41.580285] NetworkManager[397]: Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. [ 41.636047] NetworkManager[397]: (eth0): DHCPv4 state changed nbi -> preinit [ 47.153037] NetworkManager[397]: (eth0): DHCPv4 state changed preinit -> bound [ 47.153060] NetworkManager[397]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled... [ 47.153166] NetworkManager[397]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started... [ 47.153330] NetworkManager[397]: address 141.26.67.142 [ 47.153346] NetworkManager[397]: prefix 21 (255.255.248.0) [ 47.153360] NetworkManager[397]: gateway 141.26.64.9 [ 47.153394] NetworkManager[397]: hostname 'tsdh' [ 47.153408] NetworkManager[397]: nameserver '141.26.64.2' [ 47.153426] NetworkManager[397]: nameserver '141.26.64.1' [ 47.153460] NetworkManager[397]: domain name 'uni-koblenz.de' [ 47.154562] NetworkManager[397]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... [ 47.154570] NetworkManager[397]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete. [ 47.154813] NetworkManager[397]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... [ 48.156349] NetworkManager[397]: Clearing nscd hosts cache. [ 48.174123] NetworkManager[397]: (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0] [ 48.228026] NetworkManager[397]: Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. [ 48.228035] NetworkManager[397]: Setting system hostname to 'tsdh' (from DHCPv4) [ 48.229529] NetworkManager[397]: Activation (eth0) successful, device activated. [ 48.229538] NetworkManager[397]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. [ 51.810068] eth0: no IPv6 routers present [ 84.254959] fcron[438]: pam_unix(fcron:session): session opened for user horn by (uid=0) [ 84.256460] fcron[440]: pam_unix(fcron:session): session opened for user root by (uid=0) [ 103.321743] ntpd_intres[420]: DNS 0.gentoo.pool.ntp.org -> 178.63.212.146 [ 103.360813] ntpd_intres[420]: DNS 1.gentoo.pool.ntp.org -> 85.214.45.166 [ 103.558585] ntpd_intres[420]: DNS 2.gentoo.pool.ntp.org -> 95.89.157.176 [ 103.659834] ntpd[394]: Listen normally on 4 eth0 141.26.67.142 UDP 123 [ 103.659911] ntpd[394]: Listen normally on 5 eth0 fe80::221:86ff:fe52:b0a9 UDP 123 [ 103.660078] ntpd[394]: peers refreshed [ 103.705670] ntpd_intres[420]: DNS 3.gentoo.pool.ntp.org -> 188.40.77.71 [ 117.469376] acpid[400]: client connected from 544[0:1000] [ 117.469387] acpid[400]: 1 client rule loaded [ 119.297181] ehci_hcd 0000:00:1a.7: reused qh ffff880130c6d400 schedule [ 119.297194] usb 1-4.6.1: link qh8-0e01/ffff880130c6d400 start 5 [1/2 us] [ 119.345123] usb 1-4.6.1: unlink qh8-0e01/ffff880130c6d400 start 5 [1/2 us] [ 119.522391] ehci_hcd 0000:00:1a.7: reused qh ffff880130c6d400 schedule [ 119.522401] usb 1-4.6.1: link qh8-0e01/ffff880130c6d400 start 5 [1/2 us] [ 119.553119] usb 1-4.6.1: unlink qh8-0e01/ffff880130c6d400 start 5 [1/2 us] [ 119.638493] ehci_hcd 0000:00:1a.7: reused qh ffff880130c6d400 schedule [ 119.638499] usb 1-4.6.1: link qh8-0e01/ffff880130c6d400 start 5 [1/2 us] [ 133.293445] EXT4-fs (sda3): re-mounted. Opts: commit=0 [ 1640.841600] chrome_sandbox (1468): /proc/1466/oom_adj is deprecated, please use /proc/1466/oom_score_adj instead. [ 3264.060960] fcron[2674]: pam_unix(fcron:session): session opened for user horn by (uid=0) [ 6864.098838] fcron[3133]: pam_unix(fcron:session): session opened for user horn by (uid=0) [ 7247.243919] NetworkManager[397]: (eth0): DHCPv4 state changed bound -> renew [ 7247.243946] NetworkManager[397]: address 141.26.67.142 [ 7247.243961] NetworkManager[397]: prefix 21 (255.255.248.0) [ 7247.244056] NetworkManager[397]: gateway 141.26.64.9 [ 7247.244583] NetworkManager[397]: hostname 'tsdh' [ 7247.244624] NetworkManager[397]: nameserver '141.26.64.2' [ 7247.244639] NetworkManager[397]: nameserver '141.26.64.1' [ 7247.244654] NetworkManager[397]: domain name 'uni-koblenz.de'