Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.3-gentoo (root@ernie) (gcc version 4.6.1 (Gentoo 4.6.1-r1 p1.0, pie-0.4.5) ) #1 SMP Thu Aug 18 18:11:00 CEST 2011
Command line: root=/dev/sdb3 BOOT_IMAGE=/vmlinuz-3.0.3-gentoo ro resume=UUID=de48087a-89d8-4be1-afb1-8df3b8010883 video=nouveaufb fbcon=scrollback:128k console=tty1 quiet 
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000100 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: System manufacturer System Product Name/M2N-SLI DELUXE, BIOS ASUS M2N-SLI DELUXE ACPI BIOS Revision 5001 02/04/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
 00000-9FFFF write-back
 A0000-BFFFF uncachable
 C0000-C7FFF write-protect
 C8000-FFFFF uncachable
MTRR variable ranges enabled:
 0 base 0000000000 mask FF80000000 write-back
 1 base 0080000000 mask FFC0000000 write-back
 2 base 00BFF00000 mask FFFFF00000 uncachable
 3 base 0100000000 mask FF80000000 write-back
 4 base 0180000000 mask FFC0000000 write-back
 5 base 00E0000000 mask FFF0000000 write-combining
 6 disabled
 7 disabled
TOM2: 00000001c0000000 aka 7168M
x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000bfee0000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bfee0000 page 4k
kernel direct mapping tables up to bfee0000 @ bfedb000-bfee0000
init_memory_mapping: 0000000100000000-00000001c0000000
0100000000 - 01c0000000 page 2M
kernel direct mapping tables up to 1c0000000 @ 1bfff8000-1c0000000
ACPI: RSDP 00000000000f7a80 00024 (v02 Nvidia)
ACPI: XSDT 00000000bfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000bfeea640 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000bfee3280 0735E (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000bfee0000 00040
ACPI: SSDT 00000000bfeea880 0028A (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 00000000bfeeab80 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 00000000bfeeac00 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000bfeea780 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
Zone PFN ranges:
 DMA      0x00000010 -> 0x00001000
 DMA32    0x00001000 -> 0x00100000
 Normal   0x00100000 -> 0x001c0000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
   0: 0x00000010 -> 0x0000009f
   0: 0x00000100 -> 0x000bfee0
   0: 0x00100000 -> 0x001c0000
On node 0 totalpages: 1572463
 DMA zone: 56 pages used for memmap
 DMA zone: 5 pages reserved
 DMA zone: 3922 pages, LIFO batch:0
 DMA32 zone: 14280 pages used for memmap
 DMA32 zone: 767768 pages, LIFO batch:31
 Normal zone: 10752 pages used for memmap
 Normal zone: 775680 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfefff000
4 Processors exceeds NR_CPUS limit of 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 24 pages/cpu @ffff8801bfc00000 s68992 r8192 d21120 u1048576
pcpu-alloc: s68992 r8192 d21120 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1547370
Kernel command line: root=/dev/sdb3 BOOT_IMAGE=/vmlinuz-3.0.3-gentoo ro resume=UUID=de48087a-89d8-4be1-afb1-8df3b8010883 video=nouveaufb fbcon=scrollback:128k console=tty1 quiet 
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ b4000000 size 64 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Memory: 6053764k/7340032k available (3438k kernel code, 1050180k absent, 236088k reserved, 1453k data, 432k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:320
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty1] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2611.973 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.94 BogoMIPS (lpj=2611973)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
tseg: 00bff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110413
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
Booting Node   0, Processors  #1 Ok.
smpboot cpu 1: start_ip = 9a000
Brought up 2 CPUs
Total of 2 processors activated (10447.74 BogoMIPS).
PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
NET: Registered protocol family 16
node 0 link 0: io port [b000, ffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f03fffff]
TOM2: 00000001c0000000 aka 7168M
bus: [00, 03] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xc0000000-0xf3ffffff]
bus: 00 index 3 [mem 0xf4000000-0xffffffff]
bus: 00 index 4 [mem 0x1c0000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xbff00000-0xfebfffff]
pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
pci 0000:00:01.0: [10de:0360] type 0 class 0x000601
pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io  0xff00-0xff3f]
pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io  0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
pci 0000:00:04.0: reg 20: [io  0xfc00-0xfc0f]
pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
pci 0000:00:05.0: reg 10: [io  0x09f0-0x09f7]
pci 0000:00:05.0: reg 14: [io  0x0bf0-0x0bf3]
pci 0000:00:05.0: reg 18: [io  0x0970-0x0977]
pci 0000:00:05.0: reg 1c: [io  0x0b70-0x0b73]
pci 0000:00:05.0: reg 20: [io  0xf700-0xf70f]
pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
pci 0000:00:05.1: reg 10: [io  0x09e0-0x09e7]
pci 0000:00:05.1: reg 14: [io  0x0be0-0x0be3]
pci 0000:00:05.1: reg 18: [io  0x0960-0x0967]
pci 0000:00:05.1: reg 1c: [io  0x0b60-0x0b63]
pci 0000:00:05.1: reg 20: [io  0xf200-0xf20f]
pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
pci 0000:00:05.2: reg 10: [io  0xf100-0xf107]
pci 0000:00:05.2: reg 14: [io  0xf000-0xf003]
pci 0000:00:05.2: reg 18: [io  0xef00-0xef07]
pci 0000:00:05.2: reg 1c: [io  0xee00-0xee03]
pci 0000:00:05.2: reg 20: [io  0xed00-0xed0f]
pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
pci 0000:00:06.1: reg 10: [mem 0xfe020000-0xfe023fff]
pci 0000:00:06.1: PME# supported from D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:08.0: reg 14: [io  0xec00-0xec07]
pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: [10de:0373] type 0 class 0x000680
pci 0000:00:09.0: reg 10: [mem 0xfe027000-0xfe027fff]
pci 0000:00:09.0: reg 14: [io  0xeb00-0xeb07]
pci 0000:00:09.0: reg 18: [mem 0xfe026000-0xfe0260ff]
pci 0000:00:09.0: reg 1c: [mem 0xfe025000-0xfe02500f]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0e.0: [10de:0375] type 1 class 0x000604
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:01:0b.0: [104c:8023] type 0 class 0x000c00
pci 0000:01:0b.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:01:0b.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
pci 0000:01:0b.0: supports D1 D2
pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:0b.0: PME# disabled
pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:06.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:06.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:06.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:06.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:06.0:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [197b:2363] type 0 class 0x000106
pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
pci 0000:02:00.0: reg 30: [mem 0xfdde0000-0xfddeffff pref]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: [197b:2363] type 0 class 0x000101
pci 0000:02:00.1: reg 10: [io  0xdc00-0xdc07]
pci 0000:02:00.1: reg 14: [io  0xd800-0xd803]
pci 0000:02:00.1: reg 18: [io  0xd400-0xd407]
pci 0000:02:00.1: reg 1c: [io  0xd000-0xd003]
pci 0000:02:00.1: reg 20: [io  0xcc00-0xcc0f]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: PCI bridge to [bus 02-02]
pci 0000:00:0e.0:   bridge window [io  0xc000-0xdfff]
pci 0000:00:0e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [10de:0292] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
pci 0000:03:00.0: reg 24: [io  0xbc00-0xbc7f]
pci 0000:03:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:0f.0: PCI bridge to [bus 03-03]
pci 0000:00:0f.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:0f.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *3
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *3
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *3
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *1
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *2
ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *13
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *8
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *8
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 15) *1
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *2
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 11 14 15) *13
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff 
reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff 
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xbff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x1000-0x107f]
pnp 00:01: [io  0x1080-0x10ff]
pnp 00:01: [io  0x1400-0x147f]
pnp 00:01: [io  0x1480-0x14ff]
pnp 00:01: [io  0x1800-0x187f]
pnp 00:01: [io  0x1880-0x18ff]
system 00:01: [io  0x1000-0x107f] has been reserved
system 00:01: [io  0x1080-0x10ff] has been reserved
system 00:01: [io  0x1400-0x147f] has been reserved
system 00:01: [io  0x1480-0x14ff] has been reserved
system 00:01: [io  0x1800-0x187f] has been reserved
system 00:01: [io  0x1880-0x18ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0022-0x003f]
pnp 00:02: [io  0x0044-0x005f]
pnp 00:02: [io  0x0062-0x0063]
pnp 00:02: [io  0x0065-0x006f]
pnp 00:02: [io  0x0074-0x007f]
pnp 00:02: [io  0x0091-0x0093]
pnp 00:02: [io  0x00a2-0x00bf]
pnp 00:02: [io  0x00e0-0x00ef]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0800-0x087f]
pnp 00:02: [io  0x0290-0x0297]
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: [io  0x0290-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfefff000-0xfefff3ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [mem 0xf0000000-0xf3ffffff]
system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000d2800-0x000d3fff]
pnp 00:09: [mem 0x000f0000-0x000f7fff]
pnp 00:09: [mem 0x000f8000-0x000fbfff]
pnp 00:09: [mem 0x000fc000-0x000fffff]
pnp 00:09: [mem 0xfefff000-0xfefff0ff]
pnp 00:09: [mem 0xbfee0000-0xbfefffff]
pnp 00:09: [mem 0xffff0000-0xffffffff]
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0xbfedffff]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfefff000-0xfeffffff]
pnp 00:09: [mem 0xfff80000-0xfff80fff]
pnp 00:09: [mem 0xfff90000-0xfffbffff]
pnp 00:09: [mem 0xfffed000-0xfffeffff]
system 00:09: [mem 0x000d2800-0x000d3fff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xfefff000-0xfefff0ff] has been reserved
system 00:09: [mem 0xbfee0000-0xbfefffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xbfedffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xfefff000-0xfeffffff] could not be reserved
system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:06.0:   bridge window [io  disabled]
pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0:   bridge window [mem pref disabled]
pci 0000:00:0e.0: PCI bridge to [bus 02-02]
pci 0000:00:0e.0:   bridge window [io  0xc000-0xdfff]
pci 0000:00:0e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0e.0:   bridge window [mem pref disabled]
pci 0000:00:0f.0: PCI bridge to [bus 03-03]
pci 0000:00:0f.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:0f.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xbff00000-0xfebfffff]
pci_bus 0000:02: resource 0 [io  0xc000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfcffffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
pci 0000:03:00.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1314699430.200:1): initialized
msgmni has been set to 11952
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:0e.0: setting latency timer to 64
pcieport 0000:00:0e.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0f.0: setting latency timer to 64
pcieport 0000:00:0f.0: irq 41 for MSI/MSI-X
ERST: Table is not found!
ahci 0000:02:00.0: version 3.0
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
ahci 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ahci 0000:02:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 23
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 23
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 22
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 22
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 21
ata8: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 21
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: setting latency timer to 64
scsi8 : pata_amd
scsi9 : pata_amd
ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata9: port disabled. ignoring.
ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
pata_acpi 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:02:00.1: setting latency timer to 64
pata_acpi 0000:02:00.1: PCI INT B disabled
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
ata2: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high speed USB device number 2 using ehci_hcd
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
ata5.00: configured for UDMA/100
ata3.00: ATA-7: SAMSUNG SP2504C, VT100-52, max UDMA7
ata3.00: 488281250 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST31000333AS, SD35, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST31000333AS     SD35 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 2-2: new low speed USB device number 2 using ohci_hcd
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0
logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input1
logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB01, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            TSSTcorp DVD-ROM SH-D163B SB01 PQ: 0 ANSI: 5
scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203D  SB00 PQ: 0 ANSI: 5
usb 2-3: new low speed USB device number 3 using ohci_hcd
input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
generic-usb 0003:045E:00A4.0003: input: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:02.0-3/input0
ata6: SATA link down (SStatus 0 SControl 300)
usb 2-4: new low speed USB device number 4 using ohci_hcd
ata8: SATA link down (SStatus 0 SControl 300)
ata10: port disabled. ignoring.
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:19.
Freeing unused kernel memory: 432k freed
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
generic-usb 0003:413C:2003.0004: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-4/input0
NET: Registered protocol family 1
udevd[761]: starting version 171
MCE: In-kernel MCE decoding enabled.
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:08.0: setting latency timer to 64
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
wmi: Mapper loaded
sr0: scsi3-mmc drive: 62x/62x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 4:0:0:0: Attached scsi CD-ROM sr1
ACPI: acpi_idle registered with cpuidle
EDAC MC: Ver: 2.1.0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sr 3:0:0:0: Attached scsi generic sg2 type 5
sr 4:0:0:0: Attached scsi generic sg3 type 5
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110413/nspredef-456)
ACPI: [Package] has zero elements (ffff8801b4d8b280)
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
r8712u: module is from the staging directory, the quality is unknown, you have been warned.
r8712u: DriverVersion: v7_0.20100831
r8712u: register rtl8712_netdev_ops to netdev_ops
r8712u: USB_SPEED_HIGH with 4 endpoints
r8712u: Boot from EFUSE: Autoload OK
AMD64 EDAC driver v3.4.0
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
firewire_ohci 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:d7:c5:1d
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:09.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:01:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
nouveau 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:03:00.0: setting latency timer to 64
[drm] nouveau 0000:03:00.0: Detected an NV40 generation card (0x049200a2)
[drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:03:00.0: ... appears to be valid
[drm] nouveau 0000:03:00.0: BIT BIOS found
[drm] nouveau 0000:03:00.0: Bios version 05.71.22.42
[drm] nouveau 0000:03:00.0: TMDS table version 1.1
[drm] nouveau 0000:03:00.0: TMDS table script pointers not stubbed
[drm] nouveau 0000:03:00.0: BIT table 'd' not found
[drm] nouveau 0000:03:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:03:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:03:00.0: Raw DCB entry 1: 03000302 00000000
[drm] nouveau 0000:03:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:03:00.0: Raw DCB entry 3: 0c011312 00000000
[drm] nouveau 0000:03:00.0: Raw DCB entry 4: 020223f1 00c0c080
[drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:03:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:03:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:03:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:03:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:03:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xD1D8
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xDACB
r8712u: CustomerID = 0x0000
r8712u: MAC Address from efuse = 00:08:54:9f:05:df
usbcore: registered new interface driver r8712u
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xE4F9
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xE674
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xE7D0
[drm] nouveau 0000:03:00.0: timingset 255 does not exist
[drm] nouveau 0000:03:00.0: timingset 255 does not exist
[drm] nouveau 0000:03:00.0: 2 available performance level(s)
[drm] nouveau 0000:03:00.0: 0: memory 660MHz core 450MHz voltage 1250mV fanspeed 30%
[drm] nouveau 0000:03:00.0: 1: memory 660MHz core 450MHz voltage 1250mV fanspeed 60%
[drm] nouveau 0000:03:00.0: c: memory 702MHz core 550MHz
[TTM] Zone  kernel: Available graphics memory: 3060074 kiB.
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:03:00.0: Detected 256MiB VRAM
[drm] nouveau 0000:03:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on TV encoder (output 4)
[drm] nouveau 0000:03:00.0: allocated 1680x1050 fb: 0x49000, bo ffff8801b4f2b800
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:03:00.0: 0xC5B5: Parsing digital output script table
[drm] nouveau 0000:03:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[drm] nouveau 0000:03:00.0: Output DVI-I-1 is running on CRTC 0 using output A
Console: switching to colour frame buffer device 210x65
[drm] nouveau 0000:03:00.0: GPU lockup - switching to software fbcon
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0 on minor 0
forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1a:92:d8:be:d4
forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
hda_intel: msi for device 1043:81f6 set to 0
HDA Intel 0000:00:06.1: setting latency timer to 64
firewire_core: created device fw0: GUID 0011d800013a04f8, S400
uvesafb: NVIDIA Corporation, G71 Board - p455h7f-UQF, Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 75 Hz, hf = 82 kHz, clk = 170 MHz
uvesafb: scrolling: redraw
mtrr: type mismatch for e0000000,1000000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,800000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,400000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,200000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,100000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,80000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,40000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,20000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,10000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,8000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,4000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,2000 old: write-combining new: write-through
mtrr: type mismatch for e0000000,1000 old: write-combining new: write-through
uvesafb: framebuffer at 0xe0000000, mapped to 0xffffc90006800000, using 10240k, total 262144k
fb1: VESA VGA frame buffer device
NET: Registered protocol family 10
loop: module loaded
kvm: Nested Virtualization enabled
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00)
powernow-k8: fid 0x12 (2600 MHz), vid 0x8
powernow-k8: fid 0x10 (2400 MHz), vid 0xa
powernow-k8: fid 0xe (2200 MHz), vid 0xc
powernow-k8: fid 0xc (2000 MHz), vid 0xe
powernow-k8: fid 0xa (1800 MHz), vid 0x10
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x3bddef offMax=0x3bddef
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.2 (interface 0x00190000).
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
EXT4-fs (sdb3): re-mounted. Opts: (null)
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.16)
vboxguest: no symbol version for module_layout
vboxguest: no symbol version for module_layout
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
r8712u: 1 RCR=0x153f00e
r8712u: 2 RCR=0x553f00e
ADDRCONF(NETDEV_UP): wlan0: link is not ready
forcedeth 0000:00:08.0: irq 42 for MSI/MSI-X
forcedeth 0000:00:08.0: eth0: no link during initialization
ADDRCONF(NETDEV_UP): eth0: link is not ready
forcedeth 0000:00:09.0: irq 43 for MSI/MSI-X
forcedeth 0000:00:09.0: eth1: no link during initialization
ADDRCONF(NETDEV_UP): eth1: link is not ready
NET: Registered protocol family 17
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
r8712u: [r8712_got_addbareq_event_callback] mac = bc:05:43:ba:ce:25, seq = 48, tid = 0
wlan0: no IPv6 routers present