Linux version 3.1.0-rc5+ (diego@myhost) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #4 SMP Sat Sep 10 21:54:45 PYT 2011
Command line: root=/dev/sda2 resume=/dev/sda1 ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
 BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
 BIOS-e820: 000000007ff8e000 - 000000007ffd0000 (ACPI NVS)
 BIOS-e820: 000000007ffd0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/P5P41T-LE, BIOS 0503    07/19/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7ff80 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000007ff80000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007ff80000 page 4k
kernel direct mapping tables up to 7ff80000 @ 7ff7c000-7ff80000
ACPI: RSDP 00000000000fb7e0 00024 (v02 ACPIAM)
ACPI: XSDT 000000007ff80100 00054 (v01 A_M_I_ OEMXSDT  07001019 MSFT 00000097)
ACPI: FACP 000000007ff80290 000F4 (v03 A_M_I_ OEMFACP  07001019 MSFT 00000097)
ACPI: DSDT 000000007ff80440 07624 (v01  A1433 A1433000 00000000 INTL 20060113)
ACPI: FACS 000000007ff8e000 00040
ACPI: APIC 000000007ff80390 0006C (v01 A_M_I_ OEMAPIC  07001019 MSFT 00000097)
ACPI: MCFG 000000007ff80400 0003C (v01 A_M_I_ OEMMCFG  07001019 MSFT 00000097)
ACPI: OEMB 000000007ff8e040 00089 (v01 A_M_I_ AMI_OEM  07001019 MSFT 00000097)
ACPI: HPET 000000007ff87a70 00038 (v01 A_M_I_ OEMHPET  07001019 MSFT 00000097)
ACPI: SSDT 000000007ff8e5e0 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007ff80
On node 0 totalpages: 524047
  DMA zone: 64 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3914 pages, LIFO batch:0
  DMA32 zone: 8126 pages used for memmap
  DMA32 zone: 511938 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s72896 r8192 d21312 u524288
pcpu-alloc: s72896 r8192 d21312 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515852
Kernel command line: root=/dev/sda2 resume=/dev/sda1 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2052120k/2096640k available (3544k kernel code, 452k absent, 44068k reserved, 3100k data, 436k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2933.959 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5867.91 BogoMIPS (lpj=11735836)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 9a000
Brought up 2 CPUs
Total of 2 processors activated (11736.15 BogoMIPS).
PM: Registering ACPI NVS region at 7ff8e000 (270336 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007ff8e0d0 0050E (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0050E (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xefffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xffffffff]
pci 0000:00:00.0: [8086:2e30] type 0 class 0x000600
pci 0000:00:01.0: [8086:2e31] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf9ffc000-0xf9ffffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0xc480-0xc49f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0xc800-0xc81f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0xc880-0xc89f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0xcc00-0xcc1f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf9ffbc00-0xf9ffbfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0xc400-0xc407]
pci 0000:00:1f.2: reg 14: [io  0xc080-0xc083]
pci 0000:00:1f.2: reg 18: [io  0xc000-0xc007]
pci 0000:00:1f.2: reg 1c: [io  0xbc00-0xbc03]
pci 0000:00:1f.2: reg 20: [io  0xb880-0xb88f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: [10de:0640] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xdc00-0xdc7f]
pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
pci 0000:02:00.0: reg 18: [io  0xec00-0xec7f]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.3:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000007ff80000 - 000000007fffffff 
Switching to clocksource hpet
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xefffffff window]
pnp 00:00: [mem 0xf4000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [irq 7]
pnp 00:06: [dma 3]
pnp 00:06: [io  0x0378-0x037f]
pnp 00:06: [io  0x0778-0x077f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io  0x0290-0x0297]
system 00:07: [io  0x0290-0x0297] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0010-0x001f]
pnp 00:08: [io  0x0022-0x003f]
pnp 00:08: [io  0x0044-0x005f]
pnp 00:08: [io  0x0062-0x0063]
pnp 00:08: [io  0x0065-0x006f]
pnp 00:08: [io  0x0072-0x007f]
pnp 00:08: [io  0x0080]
pnp 00:08: [io  0x0084-0x0086]
pnp 00:08: [io  0x0088]
pnp 00:08: [io  0x008c-0x008e]
pnp 00:08: [io  0x0090-0x009f]
pnp 00:08: [io  0x00a2-0x00bf]
pnp 00:08: [io  0x00e0-0x00ef]
pnp 00:08: [io  0x0400-0x041f]
pnp 00:08: [io  0x04d0-0x04d1]
pnp 00:08: [io  0x0800-0x087f]
pnp 00:08: [io  0x0400-0x03ff disabled]
pnp 00:08: [io  0x0480-0x04bf]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed8ffff]
system 00:08: [io  0x0400-0x041f] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [mem 0xffb00000-0xffbfffff]
pnp 00:0a: [mem 0xfff00000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0b: [mem 0xffc00000-0xffefffff]
system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [irq 4]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: [io  0x03f8-0x03ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [io  0x0060]
pnp 00:0d: [io  0x0064]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xf0000000-0xf3ffffff]
system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x000c0000-0x000cffff]
pnp 00:0f: [mem 0x000e0000-0x000fffff]
pnp 00:0f: [mem 0x00100000-0x7fffffff]
pnp 00:0f: [mem 0xf0000000-0xffffffff]
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0f: [mem 0xf0000000-0xffffffff] could not be reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
Switched to NOHz mode on CPU #0
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.3: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: BAR 8: assigned [mem 0x80200000-0x803fffff]
pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.1: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: BAR 8: assigned [mem 0x80600000-0x807fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0x80600000-0x807fffff]
pci 0000:00:1c.0:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff]
pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.3:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.3:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0104 -> 0107)
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff]
pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0x80600000-0x807fffff]
pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff]
pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0x80000000-0xefffffff]
pci_bus 0000:05: resource 9 [mem 0xf4000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0030
pci 0000:00:1d.3: Performing full reset
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
fuse init (API version 7.17)
msgmni has been set to 4008
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[drm] Initialized drm 1.1.0 20060810
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 22
ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 22
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
ATL1E 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ATL1E 0000:02:00.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.0-rc5+ ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.0-rc5+ uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
usb usb3: default language 0x0409
usb usb3: udev 1, busnum 3, minor = 256
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.1.0-rc5+ uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
usb usb4: default language 0x0409
usb usb4: udev 1, busnum 4, minor = 384
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.1.0-rc5+ uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: supports USB remote wakeup
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
usb usb5: default language 0x0409
usb usb5: udev 1, busnum 5, minor = 512
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.1.0-rc5+ uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001403 0  ACK POWER sig=k CSC CONNECT
hub 1-0:1.0: port 2: status 0501 change 0001
ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 8: status 0501 change 0001
uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
uhci_hcd 0000:00:1d.3: port 2 portsc 0082,00
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
ata3.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ATAPI: ATAPI   iHAS124   B, AL08, max UDMA/100
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
scsi 2:0:1:0: CD-ROM            ATAPI    iHAS124   B      AL08 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
rtc_cmos 00:03: setting system clock to 2011-09-11 08:35:40 UTC (1315730140)
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (244)
hub 1-0:1.0: state 7 ports 8 chg 0104 evt 0000
hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0  ACK POWER OWNER sig=se0 CSC
hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0  ACK POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 8 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00
hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
usb 2-2: new low speed USB device number 2 using uhci_hcd
usb 2-2: skipped 1 descriptor after interface
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: udev 2, busnum 2, minor = 129
usb 2-2: New USB device found, idVendor=045e, idProduct=009d
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 2.10
usb 2-2: Manufacturer: Microsoft
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usbhid 2-2:1.0: usb_probe_interface
usbhid 2-2:1.0: usb_probe_interface - got id
input: Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 2.10 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
microsoft 0003:045E:009D.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 2.10] on usb-0000:00:1d.0-2/input0
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usbhid 2-2:1.1: usb_probe_interface
usbhid 2-2:1.1: usb_probe_interface - got id
input: Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 2.10 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
microsoft 0003:045E:009D.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 2.10] on usb-0000:00:1d.0-2/input1
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
Refined TSC clocksource calibration: 2934.166 MHz.
Switching to clocksource tsc
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb usb3: suspend_rh (auto-stop)
usb usb4: suspend_rh (auto-stop)
usb 5-2: new full speed USB device number 2 using uhci_hcd
usb 5-2: ep0 maxpacket = 8
usb 5-2: skipped 10 descriptors after interface
usb 5-2: skipped 2 descriptors after interface
usb 5-2: skipped 1 descriptor after endpoint
usb 5-2: skipped 2 descriptors after interface
usb 5-2: skipped 1 descriptor after endpoint
usb 5-2: skipped 2 descriptors after interface
usb 5-2: skipped 1 descriptor after endpoint
usb 5-2: skipped 1 descriptor after interface
usb 5-2: default language 0x0409
usb 5-2: udev 2, busnum 5, minor = 513
usb 5-2: New USB device found, idVendor=046d, idProduct=0a0c
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Logitech USB Headset
usb 5-2: Manufacturer: Logitech
usb 5-2: usb_probe_device
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: adding 5-2:1.0 (config #1, interface 0)
snd-usb-audio 5-2:1.0: usb_probe_interface
snd-usb-audio 5-2:1.0: usb_probe_interface - got id
usb 5-2: adding 5-2:1.1 (config #1, interface 1)
usb 5-2: adding 5-2:1.2 (config #1, interface 2)
usb 5-2: adding 5-2:1.3 (config #1, interface 3)
usbhid 5-2:1.3: usb_probe_interface
usbhid 5-2:1.3: usb_probe_interface - got id
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.3/input/input4
uhci_hcd 0000:00:1d.3: reserve dev 2 ep83-INT, period 8, phase 4, 12 us
generic-usb 0003:046D:0A0C.0003: input,hidraw2: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.3-2/input3
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
EXT4-fs (sda2): orphan cleanup on readonly fs
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 262137
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 675330
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678024
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678036
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392581
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 784924
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 676690
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678961
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678413
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 133626
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 679026
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678893
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678889
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678897
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678892
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678895
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 678836
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 670791
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392473
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392471
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392477
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392476
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392472
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392482
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392479
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392451
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392453
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392452
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392485
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 392454
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 656181
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 656330
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 656399
EXT4-fs (sda2): 33 orphan inodes deleted
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 436k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 532k freed
Freeing unused kernel memory: 604k freed
wmi: Mapper loaded
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096000c1)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 62.94.73.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00c0c080
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD201
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD670
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE6C0
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE7E1
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB08
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB6D
[drm] nouveau 0000:01:00.0: 0xEB6D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: timingset 255 does not exist
[drm] nouveau 0000:01:00.0: 1 available performance level(s)
[drm] nouveau 0000:01:00.0: 3: memory 400MHz core 550MHz shader 1350MHz fanspeed 100%
[drm] nouveau 0000:01:00.0: c: memory 399MHz core 400MHz shader 800MHz
[TTM] Zone  kernel: Available graphics memory: 1026846 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: firmware ctxprog loaded
[drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
[drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x330000, bo ffff88007c628000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Adding 4000148k swap on /dev/sda1.  Priority:-1 extents:1 across:4000148k 
ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
EXT4-fs (sda2): re-mounted. Opts: commit=0
EXT4-fs (sda3): re-mounted. Opts: commit=0
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 83 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 83 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 83 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 83 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep84-ISO, period 1, phase 0, 84 us
uhci_hcd 0000:00:1d.3: release dev 2 ep84-ISO, period 1, phase 0, 84 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
EXT4-fs (sda2): re-mounted. Opts: commit=0
EXT4-fs (sda3): re-mounted. Opts: commit=0
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
hub 4-0:1.0: hub_suspend
usb usb4: bus suspend
usb usb4: suspend_rh
hub 3-0:1.0: hub_suspend
usb usb3: bus suspend
usb usb3: suspend_rh
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend
ehci_hcd 0000:00:1d.7: suspend root hub
[drm] nouveau 0000:01:00.0: Disabling fbcon acceleration...
[drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[drm] nouveau 0000:01:00.0: Evicting buffers...
uhci_hcd 0000:00:1d.0: release dev 2 ep82-INT, period 8, phase 4, 118 us
uhci_hcd 0000:00:1d.3: release dev 2 ep83-INT, period 8, phase 4, 12 us
hub 5-0:1.0: hub_suspend
usb usb5: bus suspend
usb usb5: suspend_rh
ata_piix 0000:00:1f.1: PCI INT A disabled
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
uhci_hcd 0000:00:1d.3: uhci_pci_suspend
uhci_hcd 0000:00:1d.3: PCI INT D disabled
uhci_hcd 0000:00:1d.2: uhci_pci_suspend
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: uhci_pci_suspend
uhci_hcd 0000:00:1d.1: PCI INT B disabled
hub 2-0:1.0: hub_suspend
usb usb2: bus suspend
usb usb2: suspend_rh
uhci_hcd 0000:00:1d.0: uhci_pci_suspend
uhci_hcd 0000:00:1d.0: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PCI INT A disabled
ACPI handle has no context!
ATL1E 0000:02:00.0: PCI INT A disabled
ACPI handle has no context!
[drm] nouveau 0000:01:00.0: Idling channels...
[drm] nouveau 0000:01:00.0: Suspending GPU objects...
ata_piix 0000:00:1f.2: PCI INT B disabled
[drm] nouveau 0000:01:00.0: And we're gone!
nouveau 0000:01:00.0: PCI INT A disabled
PM: suspend of devices complete after 2127.803 msecs
ehci_hcd 0000:00:1d.7: wakeup: 0
ehci_hcd 0000:00:1d.7: --> PCI D3hot
uhci_hcd 0000:00:1d.3: wakeup: 0
uhci_hcd 0000:00:1d.3: --> PCI D0
uhci_hcd 0000:00:1d.2: wakeup: 0
uhci_hcd 0000:00:1d.2: --> PCI D0
uhci_hcd 0000:00:1d.1: wakeup: 0
uhci_hcd 0000:00:1d.1: --> PCI D0
uhci_hcd 0000:00:1d.0: wakeup: 0
uhci_hcd 0000:00:1d.0: --> PCI D0
PM: late suspend of devices complete after 16.107 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 9a000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Switched to NOHz mode on CPU #1
ACPI: Waking up from system sleep state S3
pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0x1a0100, writing 0x1a010a)
pci 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a)
pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80918081)
pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80708060)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x2020)
pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100107)
pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x20203)
pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80518041)
pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0xfff0, writing 0x80308020)
pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x200000f0, writing 0x1010)
pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100104, writing 0x100107)
pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x20400, writing 0x20405)
pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80118001)
pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
ATL1E 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
ATL1E 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
ATL1E 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
PM: early resume of devices complete after 0.545 msecs
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: uhci_pci_resume
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
uhci_hcd 0000:00:1d.0: Performing full reset
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: uhci_pci_resume
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
uhci_hcd 0000:00:1d.2: uhci_pci_resume
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
uhci_hcd 0000:00:1d.2: Performing full reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: uhci_pci_resume
ehci_hcd 0000:00:1d.7: setting latency timer to 64
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
uhci_hcd 0000:00:1d.3: Performing full reset
pci 0000:00:1e.0: setting latency timer to 64
usb usb5: root hub lost power or was reset
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.2: setting latency timer to 64
[drm] nouveau 0000:01:00.0: We're back, enabling device...
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ATL1E 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: POSTing device...
ATL1E 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD201
usb usb1: usb resume
ehci_hcd 0000:00:1d.7: resume root hub
usb usb2: usb resume
usb usb2: wakeup_rh
usb usb3: usb resume
usb usb3: wakeup_rh
usb usb4: usb resume
usb usb4: wakeup_rh
usb usb5: usb resume
usb usb5: wakeup_rh
sd 2:0:0:0: [sda] Starting disk
hub 2-0:1.0: hub_reset_resume
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 3-0:1.0: hub_reset_resume
hub 3-0:1.0: trying to enable port power on non-switchable hub
hub 4-0:1.0: hub_reset_resume
hub 4-0:1.0: trying to enable port power on non-switchable hub
hub 5-0:1.0: hub_reset_resume
hub 5-0:1.0: trying to enable port power on non-switchable hub
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD670
hub 1-0:1.0: hub_resume
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE6C0
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE7E1
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB08
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB6D
[drm] nouveau 0000:01:00.0: Restoring GPU objects...
uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00
hub 5-0:1.0: port 2: status 0101 change 0003
uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00
hub 2-0:1.0: port 2: status 0301 change 0003
[drm] nouveau 0000:01:00.0: Reinitialising engines...
[drm] nouveau 0000:01:00.0: Restoring mode...
usb 5-2: reset-resume
usb 2-2: reset-resume
Extended CMOS year: 2000
usb 5-2: reset full speed USB device number 2 using uhci_hcd
usb 5-2: ep0 maxpacket = 8
snd-usb-audio 5-2:1.0: no reset_resume for driver snd-usb-audio?
snd-usb-audio 5-2:1.1: no reset_resume for driver snd-usb-audio?
snd-usb-audio 5-2:1.2: no reset_resume for driver snd-usb-audio?
uhci_hcd 0000:00:1d.3: reserve dev 2 ep83-INT, period 8, phase 4, 12 us
snd-usb-audio 5-2:1.0: forced unbind
snd-usb-audio 5-2:1.1: forced unbind
snd-usb-audio 5-2:1.2: forced unbind
usb 2-2: reset low speed USB device number 2 using uhci_hcd
usb usb3: suspend_rh (auto-stop)
usb usb4: suspend_rh (auto-stop)
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
ata3.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out
ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/100
PM: resume of devices complete after 5237.912 msecs
snd-usb-audio 5-2:1.0: usb_probe_interface
snd-usb-audio 5-2:1.0: usb_probe_interface - got id
Restarting tasks ... 
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000
hub 5-0:1.0: port 2, status 0103, change 0000, 12 Mb/s
hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0004
hub 2-0:1.0: port 2, status 0303, change 0000, 1.5 Mb/s
done.
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 83 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 83 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 83 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 83 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep84-ISO, period 1, phase 0, 84 us
EXT4-fs (sda2): re-mounted. Opts: commit=0
EXT4-fs (sda3): re-mounted. Opts: commit=0
uhci_hcd 0000:00:1d.3: release dev 2 ep84-ISO, period 1, phase 0, 84 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: firmware ctxvals loaded
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep01-ISO, period 1, phase 0, 158 us
[drm] nouveau 0000:01:00.0: Failed to idle channel 5.
uhci_hcd 0000:00:1d.3: release dev 2 ep01-ISO, period 1, phase 0, 158 us