X.Org X Server 1.11.0 Release Date: 2011-08-26 [ 19.200] X Protocol Version 11, Revision 0 [ 19.200] Build Operating System: Linux 2.6.39-gentoo-r3 i686 Gentoo [ 19.200] Current Operating System: Linux miniky10 2.6.39-gentoo-r3 #2 Fri Sep 9 15:08:06 EDT 2011 i686 [ 19.200] Kernel command line: root=/dev/sda1 quiet [ 19.200] Build Date: 14 September 2011 07:26:43AM [ 19.201] [ 19.201] Current version of pixman: 0.22.2 [ 19.201] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 19.201] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 19.201] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 14 07:34:47 2011 [ 19.202] (==) Using config file: "/etc/X11/xorg.conf" [ 19.202] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 19.203] (==) ServerLayout "X.org Configured" [ 19.203] (**) |-->Screen "Screen0" (0) [ 19.203] (**) | |-->Monitor "Monitor0" [ 19.205] (**) | |-->Device "Card0" [ 19.205] (**) |-->Input Device "touchscreen0" [ 19.205] (**) Option "OffTime" "10" [ 19.205] (==) Automatically adding devices [ 19.205] (==) Automatically enabling devices [ 19.207] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 19.207] Entry deleted from font path. [ 19.207] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 19.207] Entry deleted from font path. [ 19.207] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 19.207] Entry deleted from font path. [ 19.208] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 19.208] Entry deleted from font path. [ 19.208] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 19.208] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 19.208] Entry deleted from font path. [ 19.208] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 19.208] (==) FontPath set to: /usr/share/fonts/misc/ [ 19.208] (==) ModulePath set to "/usr/lib/xorg/modules" [ 19.208] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.208] (II) Loader magic: 0x81dd580 [ 19.208] (II) Module ABI versions: [ 19.208] X.Org ANSI C Emulation: 0.4 [ 19.208] X.Org Video Driver: 11.0 [ 19.208] X.Org XInput driver : 13.0 [ 19.208] X.Org Server Extension : 5.0 [ 19.209] (--) PCI:*(0:0:2:0) 8086:a001:8086:574d rev 2, Mem @ 0xf0200000/524288, 0xe0000000/268435456, 0xf0100000/1048576, I/O @ 0x000020c0/8 [ 19.210] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 19.210] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. [ 19.210] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. [ 19.210] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 19.210] (II) "record" will be loaded by default. [ 19.210] (II) "dri" will be loaded. This was enabled by default and also specified in the config file. [ 19.210] (II) "dri2" will be loaded by default. [ 19.210] (II) LoadModule: "extmod" [ 19.213] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 19.215] (II) Module extmod: vendor="X.Org Foundation" [ 19.215] compiled for 1.11.0, module version = 1.0.0 [ 19.215] Module class: X.Org Server Extension [ 19.215] ABI class: X.Org Server Extension, version 5.0 [ 19.215] (II) Loading extension MIT-SCREEN-SAVER [ 19.215] (II) Loading extension XFree86-VidModeExtension [ 19.215] (II) Loading extension XFree86-DGA [ 19.215] (II) Loading extension DPMS [ 19.215] (II) Loading extension XVideo [ 19.215] (II) Loading extension XVideo-MotionCompensation [ 19.215] (II) Loading extension X-Resource [ 19.215] (II) LoadModule: "dbe" [ 19.216] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 19.217] (II) Module dbe: vendor="X.Org Foundation" [ 19.217] compiled for 1.11.0, module version = 1.0.0 [ 19.217] Module class: X.Org Server Extension [ 19.217] ABI class: X.Org Server Extension, version 5.0 [ 19.217] (II) Loading extension DOUBLE-BUFFER [ 19.217] (II) LoadModule: "dri" [ 19.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 19.220] (II) Module dri: vendor="X.Org Foundation" [ 19.220] compiled for 1.11.0, module version = 1.0.0 [ 19.220] ABI class: X.Org Server Extension, version 5.0 [ 19.220] (II) Loading extension XFree86-DRI [ 19.220] (II) LoadModule: "glx" [ 19.220] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 19.222] (II) Module glx: vendor="X.Org Foundation" [ 19.222] compiled for 1.11.0, module version = 1.0.0 [ 19.222] ABI class: X.Org Server Extension, version 5.0 [ 19.223] (==) AIGLX enabled [ 19.223] (II) Loading extension GLX [ 19.223] (II) LoadModule: "vbe" [ 19.225] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 19.226] (II) Module vbe: vendor="X.Org Foundation" [ 19.226] compiled for 1.11.0, module version = 1.1.0 [ 19.226] ABI class: X.Org Video Driver, version 11.0 [ 19.226] (II) LoadModule: "ddc" [ 19.226] (II) Module "ddc" already built-in [ 19.226] (II) LoadModule: "i2c" [ 19.226] (II) Module "i2c" already built-in [ 19.226] (II) LoadModule: "record" [ 19.227] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 19.228] (II) Module record: vendor="X.Org Foundation" [ 19.228] compiled for 1.11.0, module version = 1.13.0 [ 19.228] Module class: X.Org Server Extension [ 19.228] ABI class: X.Org Server Extension, version 5.0 [ 19.228] (II) Loading extension RECORD [ 19.228] (II) LoadModule: "dri2" [ 19.228] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 19.229] (II) Module dri2: vendor="X.Org Foundation" [ 19.229] compiled for 1.11.0, module version = 1.2.0 [ 19.229] ABI class: X.Org Server Extension, version 5.0 [ 19.229] (II) Loading extension DRI2 [ 19.229] (II) LoadModule: "intel" [ 19.229] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 19.234] (II) Module intel: vendor="X.Org Foundation" [ 19.234] compiled for 1.11.0, module version = 2.15.0 [ 19.234] Module class: X.Org Video Driver [ 19.234] ABI class: X.Org Video Driver, version 11.0 [ 19.234] (II) LoadModule: "elographics" [ 19.234] (II) Loading /usr/lib/xorg/modules/input/elographics_drv.so [ 19.235] (II) Module elographics: vendor="X.Org Foundation" [ 19.235] compiled for 1.11.0, module version = 1.3.0 [ 19.235] Module class: X.Org XInput Driver [ 19.235] ABI class: X.Org XInput driver, version 13.0 [ 19.235] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 19.235] (++) using VT number 7 [ 19.250] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 19.250] drmOpenDevice: node name is /dev/dri/card0 [ 19.250] drmOpenDevice: open result is 10, (OK) [ 19.250] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 19.250] drmOpenDevice: node name is /dev/dri/card0 [ 19.250] drmOpenDevice: open result is 10, (OK) [ 19.250] drmOpenByBusid: drmOpenMinor returns 10 [ 19.250] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 19.250] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 19.251] (==) intel(0): RGB weight 888 [ 19.251] (==) intel(0): Default visual is TrueColor [ 19.251] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G [ 19.251] (--) intel(0): Chipset: "Pineview G" [ 19.251] (**) intel(0): Relaxed fencing enabled [ 19.251] (**) intel(0): Framebuffer tiled [ 19.251] (**) intel(0): Pixmaps tiled [ 19.251] (**) intel(0): 3D buffers tiled [ 19.251] (**) intel(0): SwapBuffers wait enabled [ 19.251] (==) intel(0): video overlay key set to 0x101fe [ 19.251] (II) intel(0): Output LVDS1 using monitor section Monitor0 [ 19.319] (II) intel(0): Output VGA1 has no monitor section [ 19.319] (II) intel(0): EDID for output LVDS1 [ 19.319] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 19.319] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.319] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.319] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 19.319] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 19.319] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 19.319] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 19.320] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 19.320] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 19.320] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 19.320] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 19.320] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 19.320] (II) intel(0): Printing probed modes for output LVDS1 [ 19.320] (II) intel(0): Modeline "1280x800"x58.1 68.90 1280 1292 1340 1440 800 804 807 823 -hsync -vsync (47.8 kHz) [ 19.320] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 19.320] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 19.320] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 19.320] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 19.386] (II) intel(0): EDID for output VGA1 [ 19.386] (II) intel(0): Manufacturer: ELO Model: 1478 Serial#: 20770 [ 19.386] (II) intel(0): Year: 2010 Week: 51 [ 19.386] (II) intel(0): EDID Version: 1.3 [ 19.386] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 19.386] (II) intel(0): Sync: Separate Composite SyncOnGreen [ 19.386] (II) intel(0): Max Image Size [cm]: horiz.: 37 vert.: 30 [ 19.386] (II) intel(0): Gamma: 2.20 [ 19.386] (II) intel(0): DPMS capabilities: Off; RGB/Color Display [ 19.386] (II) intel(0): First detailed timing is preferred mode [ 19.386] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 19.386] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 19.386] (II) intel(0): Supported established timings: [ 19.386] (II) intel(0): 720x400@70Hz [ 19.386] (II) intel(0): 640x480@60Hz [ 19.386] (II) intel(0): 640x480@67Hz [ 19.386] (II) intel(0): 640x480@72Hz [ 19.386] (II) intel(0): 640x480@75Hz [ 19.386] (II) intel(0): 800x600@56Hz [ 19.386] (II) intel(0): 800x600@60Hz [ 19.386] (II) intel(0): 800x600@72Hz [ 19.386] (II) intel(0): 800x600@75Hz [ 19.386] (II) intel(0): 832x624@75Hz [ 19.386] (II) intel(0): 1024x768@60Hz [ 19.386] (II) intel(0): 1024x768@70Hz [ 19.386] (II) intel(0): 1024x768@75Hz [ 19.386] (II) intel(0): 1280x1024@75Hz [ 19.386] (II) intel(0): Manufacturer's mask: 0 [ 19.387] (II) intel(0): Supported standard timings: [ 19.387] (II) intel(0): #0: hsize: 640 vsize 480 refresh: 61 vid: 16689 [ 19.387] (II) intel(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293 [ 19.387] (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 65 vid: 17761 [ 19.387] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 19.387] (II) intel(0): #4: hsize: 1280 vsize 960 refresh: 75 vid: 20353 [ 19.387] (II) intel(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 19.387] (II) intel(0): #6: hsize: 1280 vsize 1024 refresh: 70 vid: 35457 [ 19.387] (II) intel(0): #7: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 19.387] (II) intel(0): Supported detailed timing: [ 19.387] (II) intel(0): clock: 108.0 MHz Image Size: 0 x 0 mm [ 19.387] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 19.387] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 19.387] (II) intel(0): Monitor name: ET1939L-6CWA [ 19.387] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 135 MHz [ 19.387] (II) intel(0): [ 19.387] (II) intel(0): EDID (in hex): [ 19.387] (II) intel(0): 00ffffffffffff00158f781422510000 [ 19.387] (II) intel(0): 331401036e251e782aee95a3544c9926 [ 19.387] (II) intel(0): 0f5054bfef003141454f61458180814f [ 19.387] (II) intel(0): 714f818a8140302a009851002a403070 [ 19.387] (II) intel(0): 130000000000001e000000fc00455431 [ 19.387] (II) intel(0): 3933394c2d364357410a000000fd0038 [ 19.387] (II) intel(0): 4b1f510d0000000000000000000000fe [ 19.387] (II) intel(0): 00200a0a0a0a0a0a0a0a0a0a0a0a00c6 [ 19.387] (II) intel(0): Printing probed modes for output VGA1 [ 19.387] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 19.387] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 19.387] (II) intel(0): Modeline "1280x1024"x70.0 128.95 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz) [ 19.387] (II) intel(0): Modeline "1280x960"x75.0 129.94 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.2 kHz) [ 19.387] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 19.387] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 19.387] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 19.387] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 19.387] (II) intel(0): Modeline "1024x768"x65.0 69.69 1024 1080 1184 1344 768 769 772 798 -hsync +vsync (51.9 kHz) [ 19.387] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 19.388] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 19.388] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 19.388] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 19.388] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 19.388] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 19.388] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 19.388] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 19.388] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 19.388] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 19.388] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 19.388] (II) intel(0): Output LVDS1 connected [ 19.388] (II) intel(0): Output VGA1 connected [ 19.388] (II) intel(0): Using user preference for initial modes [ 19.388] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 19.388] (II) intel(0): Output VGA1 using initial mode 1280x1024 [ 19.388] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 19.388] (II) intel(0): Kernel page flipping support detected, enabling [ 19.388] (==) intel(0): DPI set to (96, 96) [ 19.388] (II) Loading sub module "fb" [ 19.388] (II) LoadModule: "fb" [ 19.388] (II) Loading /usr/lib/xorg/modules/libfb.so [ 19.391] (II) Module fb: vendor="X.Org Foundation" [ 19.391] compiled for 1.11.0, module version = 1.0.0 [ 19.391] ABI class: X.Org ANSI C Emulation, version 0.4 [ 19.391] (II) Loading sub module "dri2" [ 19.391] (II) LoadModule: "dri2" [ 19.391] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 19.391] (II) Module dri2: vendor="X.Org Foundation" [ 19.391] compiled for 1.11.0, module version = 1.2.0 [ 19.391] ABI class: X.Org Server Extension, version 5.0 [ 19.391] (==) Depth 24 pixmap format is 32 bpp [ 19.391] (II) intel(0): [DRI2] Setup complete [ 19.391] (II) intel(0): [DRI2] DRI driver: i915 [ 19.391] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled [ 19.395] (II) UXA(0): Driver registered support for the following operations: [ 19.395] (II) solid [ 19.395] (II) copy [ 19.395] (II) composite (RENDER acceleration) [ 19.395] (II) put_image [ 19.395] (II) get_image [ 19.395] (==) intel(0): Backing store disabled [ 19.395] (==) intel(0): Silken mouse enabled [ 19.396] (II) intel(0): Initializing HW Cursor [ 19.427] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 19.427] (**) intel(0): DPMS enabled [ 19.427] (II) intel(0): Set up textured video [ 19.427] (II) intel(0): Set up overlay video [ 19.427] (II) intel(0): direct rendering: DRI2 Enabled [ 19.427] (==) intel(0): hotplug detection: "enabled" [ 19.428] (--) RandR disabled [ 19.428] (II) Initializing built-in extension Generic Event Extension [ 19.428] (II) Initializing built-in extension SHAPE [ 19.428] (II) Initializing built-in extension MIT-SHM [ 19.428] (II) Initializing built-in extension XInputExtension [ 19.428] (II) Initializing built-in extension XTEST [ 19.428] (II) Initializing built-in extension BIG-REQUESTS [ 19.428] (II) Initializing built-in extension SYNC [ 19.428] (II) Initializing built-in extension XKEYBOARD [ 19.428] (II) Initializing built-in extension XC-MISC [ 19.428] (II) Initializing built-in extension XINERAMA [ 19.428] (II) Initializing built-in extension XFIXES [ 19.428] (II) Initializing built-in extension RENDER [ 19.428] (II) Initializing built-in extension RANDR [ 19.428] (II) Initializing built-in extension COMPOSITE [ 19.428] (II) Initializing built-in extension DAMAGE [ 19.481] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 19.481] (II) AIGLX: enabled GLX_INTEL_swap_event [ 19.481] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 19.481] (II) AIGLX: enabled GLX_SGI_make_current_read [ 19.481] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 19.482] (II) AIGLX: Loaded and initialized i915 [ 19.482] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 19.483] (II) intel(0): Setting screen physical size to 338 x 270 [ 19.596] (II) Using input driver 'elographics' for 'touchscreen0' [ 19.596] (II) Loading /usr/lib/xorg/modules/input/elographics_drv.so [ 19.596] (**) Option "AlwaysCore" [ 19.596] (**) Option "SendCoreEvents" "yes" [ 19.596] (**) Option "CorePointer" [ 19.596] (**) touchscreen0: always reports core events [ 19.596] (**) Elographics X device name: TOUCHSCREEN [ 19.596] (**) Option "ScreenNo" "0" [ 19.596] (**) Elographics associated screen: 0 [ 19.596] (**) Elographics untouch delay: 50 ms [ 19.596] (**) Elographics report delay: 10 ms [ 19.596] (**) Option "MaxX" "30" [ 19.596] (**) Elographics maximum x position: 30 [ 19.597] (**) Option "MinX" "4050" [ 19.597] (**) Elographics minimum x position: 4050 [ 19.597] (**) Option "MaxY" "30" [ 19.597] (**) Elographics maximum y position: 30 [ 19.597] (**) Option "MinY" "4050" [ 19.597] (**) Elographics minimum y position: 4050 [ 19.597] (**) Option "DebugLevel" "0" [ 19.597] (**) Elographics device will work in Landscape mode [ 19.597] (II) Elographics: reverse x mode (minimum x position >= maximum x position) [ 19.597] (II) Elographics: reverse y mode (minimum y position >= maximum y position) [ 19.597] (II) XINPUT: Adding extended input device "TOUCHSCREEN" (type: Elographics TouchScreen, id 6) [ 19.597] (**) TOUCHSCREEN: (accel) keeping acceleration scheme 1 [ 19.597] (**) TOUCHSCREEN: (accel) acceleration profile 0 [ 19.597] (**) TOUCHSCREEN: (accel) acceleration factor: 2.000 [ 19.597] (**) TOUCHSCREEN: (accel) acceleration threshold: 4 [ 19.597] (**) Option "Device" "/dev/ttyS1" [ 19.597] (**) Option "BaudRate" "9600" [ 19.597] (**) Option "StopBits" "1" [ 19.597] (**) Option "DataBits" "8" [ 19.597] (**) Option "Parity" "None" [ 19.597] (**) Option "FlowControl" "None" [ 19.687] (--) Elographics touchscreen is a Intellitouch, connected through a serial link. [ 19.687] (--) The controller is a model E271-2200, firmware revision 2.0. [ 19.687] (--) Additional features: [ 19.687] (--) External A/D converter [ 19.687] (--) Z axis active [ 19.687] [ 19.764] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 19.764] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 19.764] (II) LoadModule: "evdev" [ 19.764] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.765] (II) Module evdev: vendor="X.Org Foundation" [ 19.765] compiled for 1.11.0, module version = 2.6.0 [ 19.765] Module class: X.Org XInput Driver [ 19.765] ABI class: X.Org XInput driver, version 13.0 [ 19.765] (II) Using input driver 'evdev' for 'Power Button' [ 19.765] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.765] (**) Power Button: always reports core events [ 19.766] (**) Power Button: Device: "/dev/input/event1" [ 19.766] (--) Power Button: Found keys [ 19.766] (II) Power Button: Configuring as keyboard [ 19.766] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 19.766] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 19.766] (**) Option "xkb_rules" "evdev" [ 19.766] (**) Option "xkb_model" "evdev" [ 19.766] (**) Option "xkb_layout" "us" [ 19.839] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 19.839] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 19.839] (II) Using input driver 'evdev' for 'Sleep Button' [ 19.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.839] (**) Sleep Button: always reports core events [ 19.839] (**) Sleep Button: Device: "/dev/input/event0" [ 19.839] (--) Sleep Button: Found keys [ 19.839] (II) Sleep Button: Configuring as keyboard [ 19.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0" [ 19.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 19.839] (**) Option "xkb_rules" "evdev" [ 19.839] (**) Option "xkb_model" "evdev" [ 19.839] (**) Option "xkb_layout" "us" [ 19.841] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2) [ 19.841] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 19.841] (II) Using input driver 'evdev' for 'Logitech USB Keyboard' [ 19.841] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.841] (**) Logitech USB Keyboard: always reports core events [ 19.841] (**) Logitech USB Keyboard: Device: "/dev/input/event2" [ 19.841] (--) Logitech USB Keyboard: Found keys [ 19.841] (II) Logitech USB Keyboard: Configuring as keyboard [ 19.841] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2/event2" [ 19.841] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9) [ 19.841] (**) Option "xkb_rules" "evdev" [ 19.841] (**) Option "xkb_model" "evdev" [ 19.841] (**) Option "xkb_layout" "us" [ 19.842] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3) [ 19.843] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 19.843] (II) Using input driver 'evdev' for 'Logitech USB Keyboard' [ 19.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.843] (**) Logitech USB Keyboard: always reports core events [ 19.843] (**) Logitech USB Keyboard: Device: "/dev/input/event3" [ 19.843] (--) Logitech USB Keyboard: Found absolute axes [ 19.843] (--) Logitech USB Keyboard: Found keys [ 19.843] (II) Logitech USB Keyboard: Configuring as mouse [ 19.843] (II) Logitech USB Keyboard: Configuring as keyboard [ 19.843] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3/event3" [ 19.843] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10) [ 19.843] (**) Option "xkb_rules" "evdev" [ 19.843] (**) Option "xkb_model" "evdev" [ 19.843] (**) Option "xkb_layout" "us" [ 19.843] (II) Logitech USB Keyboard: initialized for absolute axes. [ 19.844] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1 [ 19.844] (**) Logitech USB Keyboard: (accel) acceleration profile 0 [ 19.844] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000 [ 19.844] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4 [ 19.845] (II) config/udev: Adding input device Microsoft Microsoft Wheel Mouse Optical® (/dev/input/event4) [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: Applying InputClass "evdev pointer catchall" [ 19.845] (II) Using input driver 'evdev' for 'Microsoft Microsoft Wheel Mouse Optical®' [ 19.845] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: always reports core events [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: Device: "/dev/input/event4" [ 19.845] (--) Microsoft Microsoft Wheel Mouse Optical®: Found 3 mouse buttons [ 19.845] (--) Microsoft Microsoft Wheel Mouse Optical®: Found scroll wheel(s) [ 19.845] (--) Microsoft Microsoft Wheel Mouse Optical®: Found relative axes [ 19.845] (--) Microsoft Microsoft Wheel Mouse Optical®: Found x and y relative axes [ 19.845] (II) Microsoft Microsoft Wheel Mouse Optical®: Configuring as mouse [ 19.845] (II) Microsoft Microsoft Wheel Mouse Optical®: Adding scrollwheel support [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: YAxisMapping: buttons 4 and 5 [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 19.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4/event4" [ 19.845] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wheel Mouse Optical®" (type: MOUSE, id 11) [ 19.845] (II) Microsoft Microsoft Wheel Mouse Optical®: initialized for relative axes. [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: (accel) keeping acceleration scheme 1 [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: (accel) acceleration profile 0 [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: (accel) acceleration factor: 2.000 [ 19.845] (**) Microsoft Microsoft Wheel Mouse Optical®: (accel) acceleration threshold: 4 [ 19.846] (II) config/udev: Adding input device Microsoft Microsoft Wheel Mouse Optical® (/dev/input/mouse0) [ 19.846] (II) No input driver/identifier specified (ignoring)