E# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.6: [8086:1e1c] type 1 class 0x000604
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: [8086:1e1e] type 1 class 0x000604
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xb0250000-0xb02503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:1e47] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1e02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0x20d0-0x20d7]
pci 0000:00:1f.2: reg 14: [io  0x20c0-0x20c3]
pci 0000:00:1f.2: reg 18: [io  0x20b0-0x20b7]
pci 0000:00:1f.2: reg 1c: [io  0x20a0-0x20a3]
pci 0000:00:1f.2: reg 20: [io  0x2060-0x207f]
pci 0000:00:1f.2: reg 24: [mem 0xb0240000-0xb02407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xb0230000-0xb02300ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x2040-0x205f]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: [8086:0082] type 0 class 0x000280
pci 0000:02:00.0: reg 10: [mem 0xb0100000-0xb0101fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 02-02]
pci 0000:00:1c.6:   bridge window [mem 0xb0100000-0xb01fffff]
pci 0000:03:00.0: [104c:8231] type 1 class 0x000604
pci 0000:03:00.0: supports D1 D2
pci 0000:00:1c.7: PCI bridge to [bus 03-04]
pci 0000:00:1c.7:   bridge window [mem 0xb0000000-0xb00fffff]
pci 0000:04:00.0: [104c:8235] type 0 class 0x000c00
pci 0000:04:00.0: reg 10: [mem 0xb0010000-0xb00107ff]
pci 0000:04:00.0: reg 14: [mem 0xb0000000-0xb0003fff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0:   bridge window [mem 0xb0000000-0xb00fffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xafa00000-0xfeafffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 1f 
 pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
 pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ac00 - 000000000009ffff 
reserve RAM buffer: 00000000a9013000 - 00000000abffffff 
reserve RAM buffer: 00000000aa7ea000 - 00000000abffffff 
reserve RAM buffer: 00000000ab000000 - 00000000abffffff 
reserve RAM buffer: 000000014e600000 - 000000014fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #5
Switched to NOHz mode on CPU #6
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #7
Switched to NOHz mode on CPU #4
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xafa00000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0081-0x0091]
pnp 00:01: [io  0x0093-0x009f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x002e-0x002f]
pnp 00:05: [io  0x004e-0x004f]
pnp 00:05: [io  0x0061]
pnp 00:05: [io  0x0063]
pnp 00:05: [io  0x0065]
pnp 00:05: [io  0x0067]
pnp 00:05: [io  0x0070]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0092]
pnp 00:05: [io  0x00b2-0x00b3]
pnp 00:05: [io  0x0680-0x069f]
pnp 00:05: [io  0x1000-0x100f]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0x0400-0x0453]
pnp 00:05: [io  0x0458-0x047f]
pnp 00:05: [io  0x0500-0x057f]
pnp 00:05: [io  0x164e-0x164f]
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x1000-0x100f] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x0453] has been reserved
system 00:05: [io  0x0458-0x047f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io  0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io  0x0454-0x0457]
system 00:07: [io  0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [mem 0xfed40000-0xfed44fff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed10000-0xfed17fff]
pnp 00:09: [mem 0xfed18000-0xfed18fff]
pnp 00:09: [mem 0xfed19000-0xfed19fff]
pnp 00:09: [mem 0xf8000000-0xfbffffff]
pnp 00:09: [mem 0xfed20000-0xfed3ffff]
pnp 00:09: [mem 0xfed90000-0xfed93fff]
pnp 00:09: [mem 0xfed45000-0xfed8ffff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xafa00000-0xafa00fff]
pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x00000000-0x0009cfff]
system 00:0a: [mem 0x00000000-0x0009cfff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.6: PCI bridge to [bus 02-02]
pci 0000:00:1c.6:   bridge window [mem 0xb0100000-0xb01fffff]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0:   bridge window [mem 0xb0000000-0xb00fffff]
pci 0000:00:1c.7: PCI bridge to [bus 03-04]
pci 0000:00:1c.7:   bridge window [mem 0xb0000000-0xb00fffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:02: resource 1 [mem 0xb0100000-0xb01fffff]
pci_bus 0000:03: resource 1 [mem 0xb0000000-0xb00fffff]
pci_bus 0000:04: resource 1 [mem 0xb0000000-0xb00fffff]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 13 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:05: resource 14 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:03:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 12240k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800a5013000 - ffff8800a9013000
software IO TLB at phys 0xa5013000 - 0xa9013000
audit: initializing netlink socket (disabled)
type=2000 audit(1318923915.858:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Btrfs loaded
msgmni has been set to 7685
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xb0240000 port 0xb0240100 irq 40
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xb0240000 port 0xb0240200 irq 40
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 15:353:774
mem zero: hash matches
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATAPI: ATAPI   iHAS124   B, AL0Q, max UDMA/100
ata1.00: ATA-8: WDC WD5000AAKX-603CA0, 16.01H16, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-6 16.0 PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM            ATAPI    iHAS124   B      AL0Q PQ: 0 ANSI: 5
Freeing unused kernel memory: 600k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 344k freed
Freeing unused kernel memory: 188k freed
dracut: dracut-009-10.fc15
dracut: rd.luks=0: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
udev[1020]: starting version 167
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: no more MTRRs available
[drm] MTRR allocation failed.  Graphics performance may suffer.
[drm:intel_opregion_setup], graphic opregion physical addr: 0xaaff3018
[drm:intel_opregion_setup], SWSCI supported
i915 0000:00:02.0: irq 41 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm:intel_detect_pch], Found PatherPoint PCH
[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M  d
[drm:parse_general_definitions], crt_ddc_bus_pin: 2
[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[drm:intel_modeset_init], 3 display pipes available.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_crt_init], pch crt adpa set to 0x80f40010
[drm:intel_dp_i2c_init], i2c_init DPDDC-C
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_i2c_init], i2c_init DPDDC-D
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[drm:i915_get_vblank_timestamp], crtc 0 is disabled
[drm:intel_update_fbc], 
[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:i915_get_vblank_timestamp], crtc 1 is disabled
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:intel_update_fbc], 
[drm:ironlake_crtc_dpms], crtc 2/2 dpms off
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
[drm:i915_get_vblank_timestamp], crtc 2 is disabled
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
[drm:intel_update_fbc], 
[drm:init_status_page], render ring hws offset: 0x00000000
[drm:init_status_page], gen6 bsd ring hws offset: 0x00021000
[drm:init_status_page], blt ring hws offset: 0x00042000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40010
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40010, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
Refined TSC clocksource calibration: 2195.013 MHz.
Switching to clocksource tsc
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2709W
HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_setup_crtcs], 
[drm:drm_enable_connectors], connector 6 enabled? yes
[drm:drm_enable_connectors], connector 9 enabled? yes
[drm:drm_enable_connectors], connector 13 enabled? yes
[drm:drm_enable_connectors], connector 14 enabled? no
[drm:drm_enable_connectors], connector 16 enabled? no
[drm:drm_target_preferred], looking for cmdline mode on connector 6
[drm:drm_target_preferred], looking for preferred mode on connector 6
[drm:drm_target_preferred], found mode 1920x1080
[drm:drm_target_preferred], looking for cmdline mode on connector 9
[drm:drm_target_preferred], looking for preferred mode on connector 9
[drm:drm_target_preferred], found mode 1920x1200
[drm:drm_target_preferred], looking for cmdline mode on connector 13
[drm:drm_target_preferred], looking for preferred mode on connector 13
[drm:drm_target_preferred], found mode 1920x1200
[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
[drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4
[drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 5
[drm:intelfb_create], allocated 1920x1200 fb: 0x00063000, bo ffff880145ca6c00
fbcon: inteldrmfb (fb0) is primary device
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
[drm:intel_update_fbc], 
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 12, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 67, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 3: display plane 142, fbc lines 4, cursor 10
[drm:drm_crtc_helper_set_mode], [ENCODER:7:DAC-7] set [MODE:59:1920x1080]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 12, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 67, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 3: display plane 142, fbc lines 4, cursor 10
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700
[drm:ivb_manual_fdi_link_train], FDI train 1 done.
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
[drm:ivb_manual_fdi_link_train], FDI train 2 done.
[drm:ivb_manual_fdi_link_train], FDI train done.
[drm:intel_update_fbc], 
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], 	[CONNECTOR:6:VGA-1] set DPMS on
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_crtc_helper_set_mode], [CRTC:4]
[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 1:
[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
[drm:intel_update_fbc], 
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:TMDS-8] set [MODE:60:1920x1200]
[drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe B
[drm:intel_write_eld], ELD on [CONNECTOR:9:HDMI-A-1], [ENCODER:8:TMDS-8]
[drm:ironlake_write_eld], ELD on pipe B
[drm:ironlake_write_eld], Audio directed to unknown port
[drm:ironlake_write_eld], ELD size 9
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700
[drm:ivb_manual_fdi_link_train], FDI train 1 done.
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
[drm:ivb_manual_fdi_link_train], FDI train 2 done.
[drm:ivb_manual_fdi_link_train], FDI train done.
[drm:intel_update_fbc], 
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], 	[CONNECTOR:9:HDMI-A-1] set DPMS on
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_crtc_helper_set_mode], [CRTC:5]
[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 2:
[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:ironlake_crtc_mode_set], using pipe b dpll
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
[drm:intel_update_fbc], 
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:61:1920x1200]
[drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe C
[drm:intel_write_eld], ELD on [CONNECTOR:13:HDMI-A-2], [ENCODER:12:TMDS-12]
[drm:ironlake_write_eld], ELD on pipe C
[drm:ironlake_write_eld], Audio directed to unknown port
[drm:ironlake_write_eld], ELD size 9
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
[drm:ivb_manual_fdi_link_train], FDI train 1 done.
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x200
[drm:ivb_manual_fdi_link_train], FDI train 2 done.
[drm:ivb_manual_fdi_link_train], FDI train done.
[drm:intel_update_fbc], 
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], 	[CONNECTOR:13:HDMI-A-2] set DPMS on
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
Console: switching to colour frame buffer device 240x67
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:5a: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd.dm=0: removing DM RAID activation
dracut: rd.md=0: removing MD RAID activation
[drm:pch_irq_handler], PCH HDCP audio interrupt
[drm:i915_hotplug_work_func], running encoder hotplug functions
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
firewire_ohci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb0270000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.0rc6_3pipe_20111014_3pipe_20111014+ ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb0250000
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.0rc6_3pipe_20111014_3pipe_20111014+ ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
[drm:pch_irq_handler], PCH HDCP audio interrupt
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:pch_irq_handler], PCH HDCP audio interrupt
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[drm:i915_hotplug_work_func], running encoder hotplug functions
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
usb 1-1: new high speed USB device number 2 using ehci_hcd
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
[drm:pch_irq_handler], PCH HDCP audio interrupt
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
dracut: Checking filesystems
dracut: fsck -T -t noopts=_netdev -A -a
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[drm:i915_hotplug_work_func], running encoder hotplug functions
[drm:i915_hotplug_work_func], running encoder hotplug functions
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
[drm:pch_irq_handler], PCH HDCP audio interrupt
usb 2-1: new high speed USB device number 2 using ehci_hcd
firewire_core: created device fw0: GUID 354fc00035e71a01, S400
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[drm:pch_irq_handler], PCH HDCP audio interrupt
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.6: new low speed USB device number 3 using ehci_hcd
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[drm:i915_hotplug_work_func], running encoder hotplug functions
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
usb 1-1.6: New USB device found, idVendor=413c, idProduct=2003
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Dell USB Keyboard
usb 1-1.6: Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2
generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.6/input0
dracut: /dev/sda1: clean, 1120969/12804096 files, 17856216/51200000 blocks
dracut: Remounting /dev/disk/by-uuid/c51f5655-e8ec-4bd8-9c44-24576fe757c1 with -o ro,
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[drm:i915_hotplug_work_func], running encoder hotplug functions
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
usb 2-1.7: new low speed USB device number 3 using ehci_hcd
dracut: Mounted root filesystem /dev/sda1
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
usb 2-1.7: New USB device found, idVendor=0461, idProduct=4d22
usb 2-1.7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.7: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input3
generic-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.7/input0
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
dracut: Switching root
systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
NET: Registered protocol family 10
systemd[1]: Set hostname to <x-ivb4>.
systemd-readahead-collect[1908]: Failed to create fanotify object: Function not implemented
systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1
EXT3-fs (sda1): using internal journal
udev[1933]: starting version 167
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x306a4, pf=0x2, revision=0x5
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
microcode: CPU1 sig=0x306a4, pf=0x2, revision=0x5
microcode: CPU2 sig=0x306a4, pf=0x2, revision=0x5
microcode: CPU3 sig=0x306a4, pf=0x2, revision=0x5
microcode: CPU4 sig=0x306a4, pf=0x2, revision=0x5
microcode: CPU5 sig=0x306a4, pf=0x2, revision=0x5
microcode: CPU6 sig=0x306a4, pf=0x2, revision=0x5
microcode: CPU7 sig=0x306a4, pf=0x2, revision=0x5
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
mtp-probe[2601]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6"
mtp-probe[2600]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7"
mtp-probe[2600]: bus: 2, device: 3 was not an MTP device
mtp-probe[2601]: bus: 1, device: 3 was not an MTP device
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:f9:de:7e
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Adding 2047996k swap on /dev/sda2.  Priority:0 extents:1 across:2047996k 
hda_codec: ALC889: BIOS auto-probing.
hda_codec: ALC889: SKU not ready 0x598301f0
ALSA sound/pci/hda/hda_codec.c:4873 autoconfig: line_outs=3 (0x14/0x19/0x16/0x0/0x0) type:line
ALSA sound/pci/hda/hda_codec.c:4877    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4881    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4882    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4885    dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:4886    inputs:
ALSA sound/pci/hda/hda_codec.c:4890  Front Mic=0x18
ALSA sound/pci/hda/hda_codec.c:4890  Rear Mic=0x1b
ALSA sound/pci/hda/hda_codec.c:4890  Line=0x1a
ALSA sound/pci/hda/hda_codec.c:4892 
ALSA sound/pci/hda/patch_realtek.c:1270 realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1351 realtek: Enable default setup for auto mode as fallback
HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor DELL 2408WFP at connection type HDMI
HDMI: available speakers: FL/FR
HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor DELL 2709W at connection type HDMI
HDMI: available speakers: FL/FR LFE RL/RR
HDMI: supports coding type LPCM: channels = 6, rates = 44100 48000 88200, bits = 16 20 24
HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor DELL 2408WFP at connection type HDMI
HDMI: available speakers: FL/FR
HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor DELL 2408WFP at connection type HDMI
HDMI: available speakers: FL/FR
HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor DELL 2709W at connection type HDMI
HDMI: available speakers: FL/FR LFE RL/RR
HDMI: supports coding type LPCM: channels = 6, rates = 44100 48000 88200, bits = 16 20 24
HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor DELL 2709W at connection type HDMI
HDMI: available speakers: FL/FR LFE RL/RR
HDMI: supports coding type LPCM: channels = 6, rates = 44100 48000 88200, bits = 16 20 24
/usr/sbin/gpm[2788]: *** info [daemon/startup.c(136)]:
/usr/sbin/gpm[2788]: Started gpm successfully. Entered daemon mode.
acpid[2801]: starting up with proc fs
acpid[2801]: skipping incomplete file /etc/acpi/events/videoconf
acpid[2801]: 1 rule loaded
acpid[2801]: waiting for events: event logging is off
mcelog[2813]: mcelog: Unsupported new Family 6 Model 3a CPU: only decoding architectural errors
avahi-daemon[2783]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
avahi-daemon[2783]: Successfully dropped root privileges.
avahi-daemon[2783]: avahi-daemon 0.6.30 starting up.
/usr/sbin/crond[2804]: (CRON) INFO (running with inotify support)
avahi-daemon[2783]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
smartd[2798]: smartd 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build)
smartd[2798]: Opened configuration file /etc/smartd.conf
smartd[2798]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
smartd[2798]: Device: /dev/sda, type changed from 'scsi' to 'sat'
smartd[2798]: Device: /dev/sda [SAT], opened
smartd[2798]: Device: /dev/sda [SAT], not found in smartd database.
smartd[2798]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
smartd[2798]: Monitoring 1 ATA and 0 SCSI devices
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
NetworkManager[2780]: <info> NetworkManager (version 0.8.999-2.git20110509.fc15) is starting...
NetworkManager[2780]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
avahi-daemon[2783]: Successfully called chroot().
avahi-daemon[2783]: Successfully dropped remaining capabilities.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
auditd (2907): /proc/2907/oom_adj is deprecated, please use /proc/2907/oom_score_adj instead.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:i915_driver_open], 
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:i915_driver_open], 
[drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5]
[drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5]
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2709W
HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2709W
HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_addfb], [FB:63]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:6:VGA-1]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:63] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0092D000 00000000 0 0 8192
[drm:intel_update_fbc], 
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_mode_setcrtc], [CRTC:4]
[drm:drm_mode_setcrtc], [CONNECTOR:9:HDMI-A-1]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:63] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 65:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 65:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:drm_crtc_helper_set_mode], [CRTC:4]
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
[drm:intel_update_fbc], 
[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 1:
[drm:drm_mode_debug_printmodeline], Modeline 65:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 0092D000 00000000 0 0 8192
[drm:intel_update_fbc], 
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:TMDS-8] set [MODE:65:1920x1080]
[drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe B
[drm:intel_write_eld], ELD on [CONNECTOR:9:HDMI-A-1], [ENCODER:8:TMDS-8]
[drm:ironlake_write_eld], ELD on pipe B
[drm:ironlake_write_eld], Audio directed to unknown port
[drm:ironlake_write_eld], ELD size 9
HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=0
HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
ALSA sound/pci/hda/hda_eld.c:259 HDMI: Unknown ELD version 0
HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor DELL 2709W at connection type HDMI
HDMI: available speakers: FL/FR LFE RL/RR
HDMI: supports coding type LPCM: channels = 6, rates = 44100 48000 88200, bits = 16 20 24
HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
ALSA sound/pci/hda/hda_eld.c:259 HDMI: Unknown ELD version 0
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
[drm:ivb_manual_fdi_link_train], FDI train 1 done.
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
[drm:ivb_manual_fdi_link_train], FDI train 2 done.
[drm:ivb_manual_fdi_link_train], FDI train done.
[drm:intel_update_fbc], 
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], 	[CONNECTOR:9:HDMI-A-1] set DPMS on
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:13:HDMI-A-2]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:63] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 66:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 66:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:drm_crtc_helper_set_mode], [CRTC:5]
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
[drm:intel_update_fbc], 
[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 2:
[drm:drm_mode_debug_printmodeline], Modeline 66:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:ironlake_crtc_mode_set], using pipe b dpll
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 0092D000 00000000 0 0 8192
[drm:intel_update_fbc], 
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:66:1920x1080]
[drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe C
[drm:intel_write_eld], ELD on [CONNECTOR:13:HDMI-A-2], [ENCODER:12:TMDS-12]
[drm:ironlake_write_eld], ELD on pipe C
[drm:ironlake_write_eld], Audio directed to unknown port
[drm:ironlake_write_eld], ELD size 9
HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor DELL 2408WFP at connection type HDMI
HDMI: available speakers: FL/FR
HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
ALSA sound/pci/hda/hda_eld.c:259 HDMI: Unknown ELD version 0
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
[drm:ivb_manual_fdi_link_train], FDI train 1 done.
[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x200
[drm:ivb_manual_fdi_link_train], FDI train 2 done.
[drm:ivb_manual_fdi_link_train], FDI train done.
[drm:intel_update_fbc], 
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], 	[CONNECTOR:13:HDMI-A-2] set DPMS on
[drm:drm_mode_addfb], [FB:67]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:6:VGA-1]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:67] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0192D000 00000000 0 0 7680
[drm:intel_update_fbc], 
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_mode_setcrtc], [CRTC:4]
[drm:drm_mode_setcrtc], [CONNECTOR:9:HDMI-A-1]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:67] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0192D000 00000000 0 0 7680
[drm:intel_update_fbc], 
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:13:HDMI-A-2]
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:67] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0192D000 00000000 0 0 7680
[drm:intel_update_fbc], 
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[drm:i915_driver_open], 
fuse init (API version 7.17)
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2709W
HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
hda-intel: Invalid position buffer, using LPIB read method instead.
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
hda-intel: Invalid position buffer, using LPIB read method instead.
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2709W
HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2709W
HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2709W
HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:i915_driver_open], 
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:6:?]
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:9:?]
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:drm_edid_to_eld], ELD monitor DELL 2709W
HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
[drm:drm_edid_to_eld], ELD size 9, SAD count 1
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:13:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:16:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[drm:intel_crtc_cursor_set], 
[drm:intel_crtc_cursor_set], 
[drm:intel_crtc_cursor_set], 
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[drm:intel_crt_detect], CRT detected via hotplug
[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
[drm:drm_detect_monitor_audio], Monitor has basic audio support
[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_detect], DPCD: 0000000000000000
[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[drm:drm_mode_addfb], [FB:63]
[drm:intel_update_fbc], 
[drm:intel_update_fbc],