[ 547.635] X.Org X Server 1.11.2 Release Date: 2011-11-04 [ 547.638] X Protocol Version 11, Revision 0 [ 547.638] Build Operating System: Linux 3.0.4 i686 [ 547.639] Current Operating System: Linux AlexLFS 3.0.4 #1 SMP Fri Sep 2 19:45:43 EDT 2011 i686 [ 547.640] Kernel command line: root=/dev/sdb3 video=640x400M@70m [ 547.641] Build Date: 23 November 2011 05:15:48PM [ 547.642] [ 547.643] Current version of pixman: 0.24.0 [ 547.643] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 547.645] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 547.647] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 23 17:59:30 2011 [ 547.647] (==) Using config file: "/etc/X11/xorg.conf" [ 547.648] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 547.649] (==) ServerLayout "X.org Configured" [ 547.649] (**) |-->Screen "Screen0" (0) [ 547.649] (**) | |-->Monitor "Monitor0" [ 547.649] (**) | |-->Device "Card0" [ 547.649] (**) Option "BlankTime" "15" [ 547.649] (==) Automatically adding devices [ 547.649] (==) Automatically enabling devices [ 547.649] (**) FontPath set to: /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/OTF, /usr/share/fonts/X11/TTF, /usr/share/fonts/X11/Type1, /usr/lib/X11/fonts/Speedo/, /usr/share/fonts/X11/misc/, /usr/share/fonts/X11/TTF/, /usr/share/fonts/X11/OTF/, /usr/share/fonts/X11/Type1/, /usr/share/fonts/X11/100dpi/, /usr/share/fonts/X11/75dpi/ [ 547.649] (**) ModulePath set to "/usr/lib/X11/modules" [ 547.649] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 547.649] (II) Loader magic: 0x81e4820 [ 547.649] (II) Module ABI versions: [ 547.649] X.Org ANSI C Emulation: 0.4 [ 547.649] X.Org Video Driver: 11.0 [ 547.649] X.Org XInput driver : 13.0 [ 547.649] X.Org Server Extension : 6.0 [ 547.650] (--) PCI:*(0:0:2:0) 8086:2982:1043:8276 rev 3, Mem @ 0xfe900000/1048576, 0xd0000000/268435456, I/O @ 0x0000cc00/8 [ 547.650] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 547.650] (II) "extmod" will be loaded by default. [ 547.650] (II) "dbe" will be loaded by default. [ 547.650] (II) "glx" will be loaded by default. [ 547.650] (II) "record" will be loaded by default. [ 547.650] (II) "dri" will be loaded by default. [ 547.650] (II) "dri2" will be loaded by default. [ 547.650] (II) LoadModule: "extmod" [ 547.650] (II) Loading /usr/lib/X11/modules/extensions/libextmod.so [ 547.650] (II) Module extmod: vendor="X.Org Foundation" [ 547.650] compiled for 1.11.2, module version = 1.0.0 [ 547.650] Module class: X.Org Server Extension [ 547.650] ABI class: X.Org Server Extension, version 6.0 [ 547.650] (II) Loading extension MIT-SCREEN-SAVER [ 547.650] (II) Loading extension XFree86-VidModeExtension [ 547.650] (II) Loading extension XFree86-DGA [ 547.650] (II) Loading extension DPMS [ 547.650] (II) Loading extension XVideo [ 547.650] (II) Loading extension XVideo-MotionCompensation [ 547.650] (II) Loading extension X-Resource [ 547.650] (II) LoadModule: "dbe" [ 547.650] (II) Loading /usr/lib/X11/modules/extensions/libdbe.so [ 547.650] (II) Module dbe: vendor="X.Org Foundation" [ 547.650] compiled for 1.11.2, module version = 1.0.0 [ 547.650] Module class: X.Org Server Extension [ 547.650] ABI class: X.Org Server Extension, version 6.0 [ 547.650] (II) Loading extension DOUBLE-BUFFER [ 547.650] (II) LoadModule: "glx" [ 547.651] (II) Loading /usr/lib/X11/modules/extensions/libglx.so [ 547.651] (II) Module glx: vendor="X.Org Foundation" [ 547.651] compiled for 1.11.2, module version = 1.0.0 [ 547.651] ABI class: X.Org Server Extension, version 6.0 [ 547.651] (==) AIGLX enabled [ 547.651] (II) Loading extension GLX [ 547.651] (II) LoadModule: "record" [ 547.651] (II) Loading /usr/lib/X11/modules/extensions/librecord.so [ 547.651] (II) Module record: vendor="X.Org Foundation" [ 547.651] compiled for 1.11.2, module version = 1.13.0 [ 547.651] Module class: X.Org Server Extension [ 547.651] ABI class: X.Org Server Extension, version 6.0 [ 547.651] (II) Loading extension RECORD [ 547.651] (II) LoadModule: "dri" [ 547.651] (II) Loading /usr/lib/X11/modules/extensions/libdri.so [ 547.651] (II) Module dri: vendor="X.Org Foundation" [ 547.651] compiled for 1.11.2, module version = 1.0.0 [ 547.651] ABI class: X.Org Server Extension, version 6.0 [ 547.651] (II) Loading extension XFree86-DRI [ 547.651] (II) LoadModule: "dri2" [ 547.651] (II) Loading /usr/lib/X11/modules/extensions/libdri2.so [ 547.651] (II) Module dri2: vendor="X.Org Foundation" [ 547.651] compiled for 1.11.2, module version = 1.2.0 [ 547.652] ABI class: X.Org Server Extension, version 6.0 [ 547.652] (II) Loading extension DRI2 [ 547.652] (II) LoadModule: "intel" [ 547.652] (II) Loading /usr/lib/X11/modules/drivers/intel_drv.so [ 547.652] (II) Module intel: vendor="X.Org Foundation" [ 547.652] compiled for 1.11.2, module version = 2.16.0 [ 547.652] Module class: X.Org Video Driver [ 547.652] ABI class: X.Org Video Driver, version 11.0 [ 547.652] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 547.652] (--) using VT number 7 [ 547.656] (II) Loading /usr/lib/X11/modules/drivers/intel_drv.so [ 547.656] drmOpenDevice: node name is /dev/dri/card0 [ 547.656] drmOpenDevice: open result is 10, (OK) [ 547.656] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 547.656] drmOpenDevice: node name is /dev/dri/card0 [ 547.656] drmOpenDevice: open result is 10, (OK) [ 547.656] drmOpenByBusid: drmOpenMinor returns 10 [ 547.656] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 547.656] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 547.656] (==) intel(0): RGB weight 888 [ 547.656] (==) intel(0): Default visual is TrueColor [ 547.656] (II) intel(0): Integrated Graphics Chipset: Intel(R) G35 [ 547.656] (--) intel(0): Chipset: "G35" [ 547.656] (**) intel(0): Relaxed fencing enabled [ 547.656] (**) intel(0): Wait on SwapBuffers? enabled [ 547.656] (**) intel(0): Triple buffering? enabled [ 547.656] (**) intel(0): Framebuffer tiled [ 547.656] (**) intel(0): Pixmaps tiled [ 547.656] (**) intel(0): 3D buffers tiled [ 547.656] (**) intel(0): SwapBuffers wait enabled [ 547.656] (==) intel(0): video overlay key set to 0x101fe [ 547.723] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 547.780] (II) intel(0): EDID for output VGA1 [ 547.780] (II) intel(0): Manufacturer: SAM Model: 58a Serial#: 1263088180 [ 547.780] (II) intel(0): Year: 2009 Week: 39 [ 547.780] (II) intel(0): EDID Version: 1.3 [ 547.780] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 547.780] (II) intel(0): Sync: Separate Composite SyncOnGreen [ 547.780] (II) intel(0): Max Image Size [cm]: horiz.: 53 vert.: 30 [ 547.780] (II) intel(0): Gamma: 2.20 [ 547.780] (II) intel(0): DPMS capabilities: Off; RGB/Color Display [ 547.780] (II) intel(0): First detailed timing is preferred mode [ 547.780] (II) intel(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 547.780] (II) intel(0): blueX: 0.146 blueY: 0.070 whiteX: 0.312 whiteY: 0.329 [ 547.780] (II) intel(0): Supported established timings: [ 547.780] (II) intel(0): 640x480@60Hz [ 547.780] (II) intel(0): 800x600@56Hz [ 547.780] (II) intel(0): 800x600@60Hz [ 547.780] (II) intel(0): 1024x768@60Hz [ 547.780] (II) intel(0): Manufacturer's mask: 0 [ 547.780] (II) intel(0): Supported standard timings: [ 547.780] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 547.780] (II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 547.780] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 547.780] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 547.780] (II) intel(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 547.780] (II) intel(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 547.780] (II) intel(0): Supported detailed timing: [ 547.780] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 298 mm [ 547.780] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 547.780] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 547.780] (II) intel(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz [ 547.780] (II) intel(0): Monitor name: SyncMaster [ 547.780] (II) intel(0): Serial No: HVCS912743 [ 547.780] (II) intel(0): EDID (in hex): [ 547.780] (II) intel(0): 00ffffffffffff004c2d8a053432494b [ 547.780] (II) intel(0): 271301030e351e782a6041a6564a9c25 [ 547.780] (II) intel(0): 1250542308008100814081809500a940 [ 547.780] (II) intel(0): b30001010101023a801871382d40582c [ 547.780] (II) intel(0): 4500132a2100001e000000fd00383c1e [ 547.780] (II) intel(0): 5111000a202020202020000000fc0053 [ 547.780] (II) intel(0): 796e634d61737465720a2020000000ff [ 547.780] (II) intel(0): 00485643533931323734330a202000d2 [ 547.780] (II) intel(0): EDID vendor "SAM", prod id 1418 [ 547.780] (II) intel(0): Using hsync ranges from config file [ 547.780] (II) intel(0): Using vrefresh ranges from config file [ 547.780] (II) intel(0): Printing DDC gathered Modelines: [ 547.780] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 547.780] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 547.780] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 547.780] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 547.780] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 547.780] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) [ 547.780] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 547.780] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 547.780] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) [ 547.780] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) [ 547.780] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) [ 547.780] (II) intel(0): Printing probed modes for output VGA1 [ 547.780] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz) [ 547.780] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 547.780] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) [ 547.780] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) [ 547.780] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 547.780] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) [ 547.780] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 547.780] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 547.780] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 547.780] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 547.780] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 547.780] (II) intel(0): Output VGA1 connected [ 547.780] (II) intel(0): Using user preference for initial modes [ 547.780] (II) intel(0): Output VGA1 using initial mode 1280x800 [ 547.780] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 547.780] (II) intel(0): Kernel page flipping support detected, enabling [ 547.780] (**) intel(0): Display dimensions: (521, 293) mm [ 547.780] (**) intel(0): DPI set to (62, 69) [ 547.780] (II) Loading sub module "fb" [ 547.780] (II) LoadModule: "fb" [ 547.780] (II) Loading /usr/lib/X11/modules/libfb.so [ 547.781] (II) Module fb: vendor="X.Org Foundation" [ 547.781] compiled for 1.11.2, module version = 1.0.0 [ 547.781] ABI class: X.Org ANSI C Emulation, version 0.4 [ 547.781] (II) Loading sub module "dri2" [ 547.781] (II) LoadModule: "dri2" [ 547.781] (II) Loading /usr/lib/X11/modules/extensions/libdri2.so [ 547.781] (II) Module dri2: vendor="X.Org Foundation" [ 547.781] compiled for 1.11.2, module version = 1.2.0 [ 547.781] ABI class: X.Org Server Extension, version 6.0 [ 547.781] (==) Depth 24 pixmap format is 32 bpp [ 547.781] (II) intel(0): [DRI2] Setup complete [ 547.781] (II) intel(0): [DRI2] DRI driver: i965 [ 547.781] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled [ 547.787] (II) UXA(0): Driver registered support for the following operations: [ 547.787] (II) solid [ 547.787] (II) copy [ 547.787] (II) composite (RENDER acceleration) [ 547.787] (II) put_image [ 547.787] (II) get_image [ 547.787] (==) intel(0): Backing store disabled [ 547.787] (==) intel(0): Silken mouse enabled [ 547.787] (II) intel(0): Initializing HW Cursor [ 547.866] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 547.866] (**) intel(0): DPMS enabled [ 547.866] (==) intel(0): Intel XvMC decoder enabled [ 547.866] (II) intel(0): Set up textured video [ 547.866] (II) intel(0): Set up overlay video [ 547.866] (II) intel(0): [XvMC] i965_xvmc driver initialized. [ 547.866] (II) intel(0): direct rendering: DRI2 Enabled [ 547.866] (==) intel(0): hotplug detection: "enabled" [ 547.866] (--) RandR disabled [ 547.866] (II) Initializing built-in extension Generic Event Extension [ 547.866] (II) Initializing built-in extension SHAPE [ 547.866] (II) Initializing built-in extension MIT-SHM [ 547.866] (II) Initializing built-in extension XInputExtension [ 547.866] (II) Initializing built-in extension XTEST [ 547.866] (II) Initializing built-in extension BIG-REQUESTS [ 547.866] (II) Initializing built-in extension SYNC [ 547.866] (II) Initializing built-in extension XKEYBOARD [ 547.866] (II) Initializing built-in extension XC-MISC [ 547.866] (II) Initializing built-in extension XINERAMA [ 547.866] (II) Initializing built-in extension XFIXES [ 547.866] (II) Initializing built-in extension RENDER [ 547.866] (II) Initializing built-in extension RANDR [ 547.866] (II) Initializing built-in extension COMPOSITE [ 547.866] (II) Initializing built-in extension DAMAGE [ 547.876] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 547.876] (II) AIGLX: enabled GLX_INTEL_swap_event [ 547.876] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 547.876] (II) AIGLX: enabled GLX_SGI_make_current_read [ 547.876] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 547.876] (II) AIGLX: Loaded and initialized i965 [ 547.876] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 547.877] (II) intel(0): Setting screen physical size to 521 x 293 [ 548.008] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 548.008] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 548.008] (II) LoadModule: "evdev" [ 548.008] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so [ 548.008] (II) Module evdev: vendor="X.Org Foundation" [ 548.008] compiled for 1.11.2, module version = 2.6.0 [ 548.008] Module class: X.Org XInput Driver [ 548.008] ABI class: X.Org XInput driver, version 13.0 [ 548.008] (II) Using input driver 'evdev' for 'Power Button' [ 548.008] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so [ 548.008] (**) Power Button: always reports core events [ 548.008] (**) Power Button: Device: "/dev/input/event2" [ 548.008] (--) Power Button: Found keys [ 548.009] (II) Power Button: Configuring as keyboard [ 548.009] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 548.009] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 548.009] (**) Option "xkb_rules" "evdev" [ 548.009] (**) Option "xkb_model" "evdev" [ 548.009] (**) Option "xkb_layout" "us" [ 548.009] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 548.029] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 548.029] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 548.029] (II) Using input driver 'evdev' for 'Power Button' [ 548.029] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so [ 548.029] (**) Power Button: always reports core events [ 548.029] (**) Power Button: Device: "/dev/input/event1" [ 548.029] (--) Power Button: Found keys [ 548.029] (II) Power Button: Configuring as keyboard [ 548.029] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 548.029] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 548.029] (**) Option "xkb_rules" "evdev" [ 548.029] (**) Option "xkb_model" "evdev" [ 548.029] (**) Option "xkb_layout" "us" [ 548.029] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 548.029] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3) [ 548.029] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall" [ 548.029] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600' [ 548.029] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so [ 548.029] (**) Microsoft Wired Keyboard 600: always reports core events [ 548.029] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event3" [ 548.029] (--) Microsoft Wired Keyboard 600: Found keys [ 548.029] (II) Microsoft Wired Keyboard 600: Configuring as keyboard [ 548.029] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3/event3" [ 548.029] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 8) [ 548.029] (**) Option "xkb_rules" "evdev" [ 548.029] (**) Option "xkb_model" "evdev" [ 548.029] (**) Option "xkb_layout" "us" [ 548.029] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 548.030] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4) [ 548.030] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall" [ 548.030] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600' [ 548.030] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so [ 548.030] (**) Microsoft Wired Keyboard 600: always reports core events [ 548.030] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4" [ 548.030] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons [ 548.030] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s) [ 548.030] (--) Microsoft Wired Keyboard 600: Found relative axes [ 548.030] (--) Microsoft Wired Keyboard 600: Found absolute axes [ 548.030] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes [ 548.030] (--) Microsoft Wired Keyboard 600: Found keys [ 548.030] (II) Microsoft Wired Keyboard 600: Configuring as mouse [ 548.030] (II) Microsoft Wired Keyboard 600: Configuring as keyboard [ 548.030] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support [ 548.030] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5 [ 548.030] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 548.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4/event4" [ 548.030] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9) [ 548.030] (**) Option "xkb_rules" "evdev" [ 548.030] (**) Option "xkb_model" "evdev" [ 548.030] (**) Option "xkb_layout" "us" [ 548.030] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 548.030] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes. [ 548.030] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36. [ 548.030] (II) Microsoft Wired Keyboard 600: initialized for absolute axes. [ 548.030] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1 [ 548.030] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0 [ 548.030] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000 [ 548.030] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4 [ 548.030] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0) [ 548.030] (II) No input driver/identifier specified (ignoring) [ 548.030] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/event5) [ 548.030] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall" [ 548.030] (II) Using input driver 'evdev' for 'Microsoft Microsoft Basic Optical Mouse v2.0 ' [ 548.030] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so [ 548.030] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : always reports core events [ 548.030] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event5" [ 548.030] (--) Microsoft Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons [ 548.030] (--) Microsoft Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s) [ 548.031] (--) Microsoft Microsoft Basic Optical Mouse v2.0 : Found relative axes [ 548.031] (--) Microsoft Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes [ 548.031] (II) Microsoft Microsoft Basic Optical Mouse v2.0 : Configuring as mouse [ 548.031] (II) Microsoft Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support [ 548.031] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5 [ 548.031] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 548.031] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input5/event5" [ 548.031] (II) XINPUT: Adding extended input device "Microsoft Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 10) [ 548.031] (II) Microsoft Microsoft Basic Optical Mouse v2.0 : initialized for relative axes. [ 548.031] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1 [ 548.031] (**) Option "AccelerationProfile" "-1" [ 548.031] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile -1 [ 548.031] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000 [ 548.031] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4 [ 548.031] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/mouse0) [ 548.031] (II) No input driver/identifier specified (ignoring) [ 548.031] (II) config/udev: Adding input device PC Speaker (/dev/input/event0) [ 548.031] (II) No input driver/identifier specified (ignoring) [ 548.031] (II) config/udev: Adding input device (unnamed) (/dev/input/mice) [ 548.031] (II) No input driver/identifier specified (ignoring) [ 552.517] (II) Power Button: Close [ 552.517] (II) UnloadModule: "evdev" [ 552.517] (II) Unloading evdev [ 552.526] (II) Power Button: Close [ 552.526] (II) UnloadModule: "evdev" [ 552.526] (II) Unloading evdev [ 552.535] (II) Microsoft Wired Keyboard 600: Close [ 552.535] (II) UnloadModule: "evdev" [ 552.535] (II) Unloading evdev [ 552.542] (II) Microsoft Wired Keyboard 600: Close [ 552.542] (II) UnloadModule: "evdev" [ 552.542] (II) Unloading evdev [ 552.550] (II) Microsoft Microsoft Basic Optical Mouse v2.0 : Close [ 552.550] (II) UnloadModule: "evdev" [ 552.550] (II) Unloading evdev [ 552.626] Server terminated successfully (0). Closing log file.