Linux version 2.6.17-rc2 (root@linux) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 PREEMPT Thu Apr 20 08:33:31 BST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 1023MB LOWMEM available. found SMP MP-table at 000f5e30 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 258032 pages, LIFO batch:31 DMI 2.2 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f7840 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7200 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/evms/root ro ramdisk_size=8192 elevator=cfq mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=b0420000 soft=b041f000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1470.781 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032316k/1048512k available (2152k kernel code, 15580k reserved, 838k data, 180k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2941.22 BogoMIPS (lpj=1470614) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1700+ stepping 01 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 3126k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 4000-407f claimed by vt8235 PM PCI quirk: region 5000-500f claimed by vt8235 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e8000000-e9ffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 Machine check exception polling timer started. Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered (default) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (49 C) lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: AGP aperture is 128M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.24.0 20060225 on minor 0 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using monotonic_clock(). Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] lp0: using parport0 (interrupt-driven). FDC 0 is a post-1991 82077 RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 17 PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 1 eth0: VIA Rhine II at 0xeb00d000, 00:04:61:42:f5:92, IRQ 17. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx HPT374: IDE controller at PCI slot 0000:00:0e.0 ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 18 HPT374: chipset revision 7 HPT374: 100% native mode on irq 18 HPT37X: using 33MHz PCI clock ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio HPT37X: using 33MHz PCI clock ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:pio ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 17 (level, low) -> IRQ 18 HPT37X: using 33MHz PCI clock ide4: BM-DMA at 0xd000-0xd007, BIOS settings: hdi:pio, hdj:pio HPT37X: using 33MHz PCI clock ide5: BM-DMA at 0xd008-0xd00f, BIOS settings: hdk:pio, hdl:pio Probing IDE interface ide2... hde: WDC WD1200JB-00CRA1, ATA DISK drive ide2 at 0xac00-0xac07,0xb002 on irq 18 Probing IDE interface ide3... hdg: WDC WD1200JB-00GVA0, ATA DISK drive ide3 at 0xb400-0xb407,0xb802 on irq 18 Probing IDE interface ide4... Probing IDE interface ide5... VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 3 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ATAPI DVD RW 8XMax, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide4... Probing IDE interface ide5... hde: max request size: 128KiB hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hde: cache flushes not supported hde: hde1 hde2 hde3 hdg: max request size: 512KiB hdg: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hdg: cache flushes supported hdg: hdg1 hdg2 hdg3 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdc: ATAPI 48X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33) ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 20 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:00:09.2[B] -> GSI 18 (level, low) -> IRQ 21 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[eb00b000-eb00b7ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:0a.3[A] -> GSI 18 (level, low) -> IRQ 21 ehci_hcd 0000:00:0a.3: EHCI Host Controller ehci_hcd 0000:00:0a.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.3: debug port 1 ehci_hcd 0000:00:0a.3: irq 21, io mem 0xeb007000 ehci_hcd 0000:00:0a.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 22 PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 6 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:10.3: irq 22, io mem 0xeb00c000 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:0a.0[B] -> GSI 19 (level, low) -> IRQ 20 ohci_hcd 0000:00:0a.0: OHCI Host Controller ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0a.0: irq 20, io mem 0xeb004000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0a.1[C] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:0a.1: OHCI Host Controller ohci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:0a.1: irq 16, io mem 0xeb005000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0a.2[D] -> GSI 17 (level, low) -> IRQ 18 ohci_hcd 0000:00:0a.2: OHCI Host Controller ohci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:0a.2: irq 18, io mem 0xeb006000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 22 PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 6 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:10.0: irq 22, io base 0x0000d400 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 22 PCI: Via IRQ fixup for 0000:00:10.1, from 12 to 6 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 22 PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 6 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:10.2: irq 22, io base 0x0000dc00 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 5-1: new full speed USB device using ohci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c01510f6043] usb 5-2: new full speed USB device using ohci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice usb 6-2: new full speed USB device using uhci_hcd and address 3 usb 6-2: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300C usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usbcore: registered new driver libusual usbcore: registered new driver hiddev input: Logitech USB Receiver as /class/input/input0 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-1 input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver i2c-pca-isa: i/o base 0x000330. irq 10 md: raid1 personality registered for level 1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Bluetooth: HCI USB driver ver 2.9 usbcore: registered new driver hci_usb Bluetooth: Broadcom Blutonium firmware driver ver 1.0 input: AT Translated Set 2 keyboard as /class/input/input2 bcm203x_probe: Mini driver request failed bcm203x: probe of 5-2:1.0 failed with error -5 usbcore: registered new driver bcm203x NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 2 devices found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 180k freed Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 21 bttv0: Bt878 (rev 2) at 0000:00:0c.0, irq: 21, latency: 32, mmio: 0xeb008000 bttv0: detected: (Askey Magic/others) TView99 CPH05x [card=24], PCI subsystem ID is 144f:3002 bttv0: using: Askey CPH05X/06X (bt878) [many vendors] [card=24,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00feffff [init] bttv0: radio detected by subsystem id (CPH05x) bttv0: using tuner=-1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok input: bttv IR (card=24) as /class/input/input3 bttv-input: bttv IR (card=24) detected at pci-0000:00:0c.0/ir0 ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23 PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 7 PCI: Setting latency timer of device 0000:00:11.5 to 64 cannot find the slot for index 0 (range 0-1) EMU10K1_Audigy: probe of 0000:00:09.0 failed with error -12 eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Adding 1953492k swap on /dev/evms/swap0. Priority:1 extents:1 across:1953492k Adding 1953492k swap on /dev/evms/swap1. Priority:1 extents:1 across:1953492k EXT3 FS on dm-10, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on dm-8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-18, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-20, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-16, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 mtrr: 0xd0000000,0x10000000 overlaps existing 0xd0000000,0x8000000 mtrr: 0xd0000000,0x10000000 overlaps existing 0xd0000000,0x8000000 mtrr: 0xd0000000,0x10000000 overlaps existing 0xd0000000,0x8000000 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs ACPI: PCI interrupt for device 0000:00:11.5 disabled ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 18 Installing spdif_bug patch: Audigy 2 ZS [SB0350] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:11.5 to 64 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode