Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.1.4-gentoo (root@t520) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 SMP Wed Nov 30 16:52:31 CET 2011 Command line: BOOT_IMAGE=/3.1.4/bzImage root=/dev/sda3 rootfstype=ext4 drm.debug=0xe Disabled fast string operations BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS) BIOS-e820: 0000000000090000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000ba99f000 (usable) BIOS-e820: 00000000ba99f000 - 00000000bae9f000 (reserved) BIOS-e820: 00000000bae9f000 - 00000000baf9f000 (ACPI NVS) BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) BIOS-e820: 00000000f80f8000 - 00000000f80f9000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 0000000100000000 - 000000013e600000 (usable) NX (Execute Disable) protection: active EFI v2.00 by Phoenix Technologies Ltd. ACPI=0xbaffe000 ACPI 2.0=0xbaffe014 SMBIOS=0xbae25000 Kernel-defined memdesc doesn't match the one from EFI! EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000054000) (0MB) EFI: mem02: type=4, attr=0xf, range=[0x0000000000054000-0x0000000000055000) (0MB) EFI: mem03: type=3, attr=0xf, range=[0x0000000000055000-0x000000000008f000) (0MB) EFI: mem04: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) EFI: mem05: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB) EFI: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000411000) (3MB) EFI: mem07: type=7, attr=0xf, range=[0x0000000000411000-0x000000008611f000) (2141MB) EFI: mem08: type=2, attr=0xf, range=[0x000000008611f000-0x00000000b3da0000) (732MB) EFI: mem09: type=4, attr=0xf, range=[0x00000000b3da0000-0x00000000b3dc0000) (0MB) EFI: mem10: type=7, attr=0xf, range=[0x00000000b3dc0000-0x00000000b6203000) (36MB) EFI: mem11: type=4, attr=0xf, range=[0x00000000b6203000-0x00000000b6d90000) (11MB) EFI: mem12: type=7, attr=0xf, range=[0x00000000b6d90000-0x00000000b6f7f000) (1MB) EFI: mem13: type=1, attr=0xf, range=[0x00000000b6f7f000-0x00000000b6f9f000) (0MB) EFI: mem14: type=7, attr=0xf, range=[0x00000000b6f9f000-0x00000000b7be8000) (12MB) EFI: mem15: type=4, attr=0xf, range=[0x00000000b7be8000-0x00000000b7c42000) (0MB) EFI: mem16: type=7, attr=0xf, range=[0x00000000b7c42000-0x00000000b7c5f000) (0MB) EFI: mem17: type=4, attr=0xf, range=[0x00000000b7c5f000-0x00000000b7c71000) (0MB) EFI: mem18: type=7, attr=0xf, range=[0x00000000b7c71000-0x00000000b7c73000) (0MB) EFI: mem19: type=4, attr=0xf, range=[0x00000000b7c73000-0x00000000b7c74000) (0MB) EFI: mem20: type=7, attr=0xf, range=[0x00000000b7c74000-0x00000000b7c75000) (0MB) EFI: mem21: type=4, attr=0xf, range=[0x00000000b7c75000-0x00000000b7c79000) (0MB) EFI: mem22: type=7, attr=0xf, range=[0x00000000b7c79000-0x00000000b7c7a000) (0MB) EFI: mem23: type=4, attr=0xf, range=[0x00000000b7c7a000-0x00000000b814a000) (4MB) EFI: mem24: type=7, attr=0xf, range=[0x00000000b814a000-0x00000000b814b000) (0MB) EFI: mem25: type=4, attr=0xf, range=[0x00000000b814b000-0x00000000b8226000) (0MB) EFI: mem26: type=7, attr=0xf, range=[0x00000000b8226000-0x00000000b8228000) (0MB) EFI: mem27: type=4, attr=0xf, range=[0x00000000b8228000-0x00000000b9f9f000) (29MB) EFI: mem28: type=7, attr=0xf, range=[0x00000000b9f9f000-0x00000000ba267000) (2MB) EFI: mem29: type=2, attr=0xf, range=[0x00000000ba267000-0x00000000ba26d000) (0MB) EFI: mem30: type=3, attr=0xf, range=[0x00000000ba26d000-0x00000000ba99f000) (7MB) EFI: mem31: type=5, attr=0x800000000000000f, range=[0x00000000ba99f000-0x00000000baacb000) (1MB) EFI: mem32: type=5, attr=0x800000000000000f, range=[0x00000000baacb000-0x00000000bab9f000) (0MB) EFI: mem33: type=6, attr=0x800000000000000f, range=[0x00000000bab9f000-0x00000000bacaf000) (1MB) EFI: mem34: type=6, attr=0x800000000000000f, range=[0x00000000bacaf000-0x00000000bad9f000) (0MB) EFI: mem35: type=0, attr=0xf, range=[0x00000000bad9f000-0x00000000bae20000) (0MB) EFI: mem36: type=0, attr=0xf, range=[0x00000000bae20000-0x00000000bae9f000) (0MB) EFI: mem37: type=10, attr=0xf, range=[0x00000000bae9f000-0x00000000baedf000) (0MB) EFI: mem38: type=10, attr=0xf, range=[0x00000000baedf000-0x00000000baf9f000) (0MB) EFI: mem39: type=9, attr=0xf, range=[0x00000000baf9f000-0x00000000bafde000) (0MB) EFI: mem40: type=9, attr=0xf, range=[0x00000000bafde000-0x00000000bafff000) (0MB) EFI: mem41: type=4, attr=0xf, range=[0x00000000bafff000-0x00000000bb000000) (0MB) EFI: mem42: type=7, attr=0xf, range=[0x0000000100000000-0x000000013e600000) (998MB) EFI: mem43: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) EFI: mem44: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) DMI 2.6 present. DMI: LENOVO 42433UG/42433UG, BIOS 8AET41WW (1.21 ) 03/28/2011 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x13e600 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFC00000 mask FFFC00000 write-protect 1 base 000000000 mask F80000000 write-back 2 base 080000000 mask FC0000000 write-back 3 base 0BC000000 mask FFC000000 uncachable 4 base 0BB000000 mask FFF000000 uncachable 5 base 100000000 mask FC0000000 write-back 6 base 13F000000 mask FFF000000 uncachable 7 base 13E800000 mask FFF800000 uncachable 8 base 13E600000 mask FFFE00000 uncachable 9 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbb000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000098000] 98000 size 20480 init_memory_mapping: 0000000000000000-00000000bb000000 0000000000 - 00bb000000 page 2M kernel direct mapping tables up to bb000000 @ 1fffc000-20000000 init_memory_mapping: 0000000100000000-000000013e600000 0100000000 - 013e600000 page 2M kernel direct mapping tables up to 13e600000 @ ba267000-ba26d000 ACPI: RSDP 00000000baffe014 00024 (v02 LENOVO) ACPI: XSDT 00000000baffe120 000AC (v01 LENOVO TP-8A 00001210 PTEC 00000002) ACPI: FACP 00000000bafe9000 000F4 (v04 LENOVO TP-8A 00001210 PTL 00000002) ACPI: DSDT 00000000bafec000 0DDEF (v01 LENOVO TP-8A 00001210 INTL 20061109) ACPI: FACS 00000000baf2e000 00040 ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-8A 00001210 PTEC 00000001) ACPI: SSDT 00000000baffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) ACPI: SSDT 00000000baffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) ACPI: SSDT 00000000baffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109) ACPI: HPET 00000000bafe8000 00038 (v01 LENOVO TP-8A 00001210 PTL 00000002) ACPI: APIC 00000000bafe7000 00098 (v01 LENOVO TP-8A 00001210 PTL 00000002) ACPI: MCFG 00000000bafe6000 0003C (v01 LENOVO TP-8A 00001210 PTL 00000002) ACPI: ECDT 00000000bafe5000 00052 (v01 LENOVO TP-8A 00001210 PTL 00000002) ACPI: ASF! 00000000bafeb000 000A5 (v32 LENOVO TP-8A 00001210 PTL 00000002) ACPI: TCPA 00000000bafe4000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001) ACPI: SSDT 00000000bafe3000 00B71 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 00000000bafe2000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: DMAR 00000000bafe1000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) ACPI: UEFI 00000000bafe0000 0003E (v01 LENOVO TP-8A 00001210 PTL 00000002) ACPI: UEFI 00000000bafdf000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) ACPI: UEFI 00000000bafde000 0027E (v01 LENOVO TP-8A 00001210 PTL 00000002) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000013e600000 Initmem setup node 0 0000000000000000-000000013e600000 NODE_DATA [000000013e5fb000 - 000000013e5fffff] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880139c00000-ffff88013dbfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0013e600 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000010 -> 0x0000008f 0: 0x00000090 -> 0x000000a0 0: 0x00000100 -> 0x000ba99f 0: 0x000bafff -> 0x000bb000 0: 0x00100000 -> 0x0013e600 On node 0 totalpages: 1019695 DMA zone: 64 pages used for memmap DMA zone: 10 pages reserved DMA zone: 3909 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 743904 pages, LIFO batch:31 Normal zone: 3992 pages used for memmap Normal zone: 251496 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000008f000 - 0000000000090000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000ba99f000 - 00000000bae9f000 PM: Registered nosave memory: 00000000bae9f000 - 00000000baf9f000 PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 PM: Registered nosave memory: 00000000bb000000 - 00000000f80f8000 PM: Registered nosave memory: 00000000f80f8000 - 00000000f80f9000 PM: Registered nosave memory: 00000000f80f9000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 0000000100000000 Allocating PCI resources starting at bb000000 (gap: bb000000:3d0f8000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 24 pages/cpu @ffff88013e200000 s69504 r8192 d20608 u262144 pcpu-alloc: s69504 r8192 d20608 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 999309 Policy zone: Normal Kernel command line: BOOT_IMAGE=/3.1.4/bzImage root=/dev/sda3 rootfstype=ext4 drm.debug=0xe PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3882988k/5216256k available (4488k kernel code, 1137476k absent, 195792k reserved, 1837k data, 560k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:744 16 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2192.896 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.79 BogoMIPS (lpj=2192896) pid_max: default: 32768 minimum: 301 Security Framework initialized Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20110623 DMAR: Host address width 36 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a DMAR: DRHD base: 0x000000fed91000 flags: 0x1 IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a DMAR: RMRR base: 0x000000bacd5000 end: 0x000000bacebfff DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff DMAR: No ATSR found Not enabling x2apic, Intr-remapping init failed. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz stepping 07 Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 98000 Disabled fast string operations #2 smpboot cpu 2: start_ip = 98000 Disabled fast string operations #3 smpboot cpu 3: start_ip = 98000 Disabled fast string operations #4 smpboot cpu 4: start_ip = 98000 Disabled fast string operations #5 smpboot cpu 5: start_ip = 98000 Disabled fast string operations #6 smpboot cpu 6: start_ip = 98000 Disabled fast string operations #7 Ok. smpboot cpu 7: start_ip = 98000 Disabled fast string operations Brought up 8 CPUs Total of 8 processors activated (35082.54 BogoMIPS). PM: Registering ACPI NVS region at 8f000 (4096 bytes) PM: Registering ACPI NVS region at bae9f000 (1048576 bytes) NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: EC description table is found, configuring boot EC [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000bae90018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: SSDT 00000000bae91a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: SSDT 00000000bae8fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources ACPI: Power Resource [PUBS] (on) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: ACPI Dock Station Driver: 2 docks/bays found PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfebfffff] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 pci 0000:00:16.0: reg 10: [mem 0xd2625000-0xd262500f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:16.3: [8086:1c3d] type 0 class 0x000700 pci 0000:00:16.3: reg 10: [io 0x50b0-0x50b7] pci 0000:00:16.3: reg 14: [mem 0xd262c000-0xd262cfff] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200 pci 0000:00:19.0: reg 10: [mem 0xd2600000-0xd261ffff] pci 0000:00:19.0: reg 14: [mem 0xd262b000-0xd262bfff] pci 0000:00:19.0: reg 18: [io 0x5080-0x509f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 pci 0000:00:1a.0: reg 10: [mem 0xd262a000-0xd262a3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xd2620000-0xd2623fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 pci 0000:00:1d.0: reg 10: [mem 0xd2629000-0xd26293ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601 pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af] pci 0000:00:1f.2: reg 14: [io 0x50bc-0x50bf] pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7] pci 0000:00:1f.2: reg 1c: [io 0x50b8-0x50bb] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] pci 0000:00:1f.2: reg 24: [mem 0xd2628000-0xd26287ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xd2624000-0xd26240ff 64bit] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:03:00.0: [8086:4238] type 0 class 0x000280 pci 0000:03:00.0: reg 10: [mem 0xd2500000-0xd2501fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [mem 0xd2500000-0xd25fffff] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xd1d00000-0xd24fffff] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd0bfffff 64bit pref] pci 0000:0d:00.0: [1180:e823] type 0 class 0x000880 pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. pci 0000:0d:00.0: reg 10: [mem 0xd1401000-0xd14010ff] pci 0000:0d:00.0: supports D1 D2 pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0d:00.0: PME# disabled pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00 pci 0000:0d:00.3: reg 10: [mem 0xd1400000-0xd14007ff] pci 0000:0d:00.3: supports D1 D2 pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0d:00.3: PME# disabled pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xd1400000-0xd1cfffff] pci 0000:00:1c.4: bridge window [mem 0xd0c00000-0xd13fffff 64bit pref] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000008f000 - 000000000008ffff reserve RAM buffer: 00000000ba99f000 - 00000000bbffffff reserve RAM buffer: 00000000bb000000 - 00000000bbffffff reserve RAM buffer: 000000013e600000 - 000000013fffffff cfg80211: Calling CRDA to update world regulatory domain NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #7 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #6 Switched to NOHz mode on CPU #5 Switched to NOHz mode on CPU #4 Switched to NOHz mode on CPU #3 Switched to NOHz mode on CPU #2 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000c0000-0x000c3fff] pnp 00:00: [mem 0x000c4000-0x000c7fff] pnp 00:00: [mem 0x000c8000-0x000cbfff] pnp 00:00: [mem 0x000cc000-0x000cffff] pnp 00:00: [mem 0x000d0000-0x000d3fff] pnp 00:00: [mem 0x000d4000-0x000d7fff] pnp 00:00: [mem 0x000d8000-0x000dbfff] pnp 00:00: [mem 0x000dc000-0x000dffff] pnp 00:00: [mem 0x000e0000-0x000e3fff] pnp 00:00: [mem 0x000e4000-0x000e7fff] pnp 00:00: [mem 0x000e8000-0x000ebfff] pnp 00:00: [mem 0x000ec000-0x000effff] pnp 00:00: [mem 0x000f0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xbf9fffff] pnp 00:00: [mem 0xfec00000-0xfed3ffff] pnp 00:00: [mem 0xfed4c000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved system 00:00: [mem 0x000cc000-0x000cffff] has been reserved system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved system 00:00: [mem 0x000dc000-0x000dffff] has been reserved system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved system 00:00: [mem 0x000ec000-0x000effff] has been reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-fe] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0x000c0000-0x000c3fff window] pnp 00:01: [mem 0x000c4000-0x000c7fff window] pnp 00:01: [mem 0x000c8000-0x000cbfff window] pnp 00:01: [mem 0x000cc000-0x000cffff window] pnp 00:01: [mem 0x000d0000-0x000d3fff window] pnp 00:01: [mem 0x000d4000-0x000d7fff window] pnp 00:01: [mem 0x000d8000-0x000dbfff window] pnp 00:01: [mem 0x000dc000-0x000dffff window] pnp 00:01: [mem 0x000e0000-0x000e3fff window] pnp 00:01: [mem 0x000e4000-0x000e7fff window] pnp 00:01: [mem 0x000e8000-0x000ebfff window] pnp 00:01: [mem 0x000ec000-0x000effff window] pnp 00:01: [mem 0xbfa00000-0xfebfffff window] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: [io 0x0010-0x001f] pnp 00:02: [io 0x0090-0x009f] pnp 00:02: [io 0x0024-0x0025] pnp 00:02: [io 0x0028-0x0029] pnp 00:02: [io 0x002c-0x002d] pnp 00:02: [io 0x0030-0x0031] pnp 00:02: [io 0x0034-0x0035] pnp 00:02: [io 0x0038-0x0039] pnp 00:02: [io 0x003c-0x003d] pnp 00:02: [io 0x00a4-0x00a5] pnp 00:02: [io 0x00a8-0x00a9] pnp 00:02: [io 0x00ac-0x00ad] pnp 00:02: [io 0x00b0-0x00b5] pnp 00:02: [io 0x00b8-0x00b9] pnp 00:02: [io 0x00bc-0x00bd] pnp 00:02: [io 0x0050-0x0053] pnp 00:02: [io 0x0072-0x0077] pnp 00:02: [io 0x0400-0x047f] pnp 00:02: [io 0x0500-0x057f] pnp 00:02: [io 0x0800-0x080f] pnp 00:02: [io 0x15e0-0x15ef] pnp 00:02: [io 0x1600-0x167f] pnp 00:02: [mem 0xf8000000-0xfbffffff] pnp 00:02: [mem 0x00000000-0x00000fff] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] pnp 00:02: [mem 0xfed10000-0xfed13fff] pnp 00:02: [mem 0xfed18000-0xfed18fff] pnp 00:02: [mem 0xfed19000-0xfed19fff] pnp 00:02: [mem 0xfed45000-0xfed4bfff] system 00:02: [io 0x0400-0x047f] has been reserved system 00:02: [io 0x0500-0x057f] has been reserved system 00:02: [io 0x0800-0x080f] has been reserved system 00:02: [io 0x15e0-0x15ef] has been reserved system 00:02: [io 0x1600-0x167f] has been reserved system 00:02: [mem 0xf8000000-0xfbffffff] could not be reserved system 00:02: [mem 0x00000000-0x00000fff] could not be reserved system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x0070-0x0071] pnp 00:07: [irq 8] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: [io 0x0060] pnp 00:08: [io 0x0064] pnp 00:08: [irq 1] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: [irq 12] pnp 00:09: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) pnp 00:0a: [mem 0xfed40000-0xfed44fff] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [mem 0xd2500000-0xd25fffff] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xd1d00000-0xd24fffff] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd0bfffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xd1400000-0xd1cfffff] pci 0000:00:1c.4: bridge window [mem 0xd0c00000-0xd13fffff 64bit pref] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] pci_bus 0000:03: resource 1 [mem 0xd2500000-0xd25fffff] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] pci_bus 0000:05: resource 1 [mem 0xd1d00000-0xd24fffff] pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd0bfffff 64bit pref] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] pci_bus 0000:0d: resource 1 [mem 0xd1400000-0xd1cfffff] pci_bus 0000:0d: resource 2 [mem 0xd0c00000-0xd13fffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800afda0000 - ffff8800b3da0000 software IO TLB at phys 0xafda0000 - 0xb3da0000 microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x15 microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15 microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15 microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x15 microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x15 microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x15 microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x15 microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x15 microcode: Microcode Update Driver: v2.00 , Peter Oruba audit: initializing netlink socket (disabled) type=2000 audit(1322690497.605:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7692 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 65536K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 intel_idle: MWAIT substates: 0x21120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle yielding to intel_idle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (42 C) [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 ACPI: Battery Slot [BAT0] (battery present) [drm:intel_opregion_setup], graphic opregion physical addr: 0xbaef7018 [drm:intel_opregion_setup], Public ACPI methods supported [drm:intel_opregion_setup], SWSCI supported [drm:intel_opregion_setup], ASLE supported i915 0000:00:02.0: irq 40 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm:intel_detect_pch], Found CougarPoint PCH [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x8 0xa [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [drm:intel_dsm_pci_probe], no _DSM method for intel device [drm:intel_modeset_init], 2 display pipes available. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_panel_get_backlight], get backlight PWM = 4437 [drm:intel_panel_get_max_backlight], max backlight PWM = 4437 [drm:intel_panel_get_backlight], get backlight PWM = 4437 [drm:intel_crt_init], pch crt adpa set to 0x80f40000 [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [drm:i915_get_vblank_timestamp], crtc 0 is disabled [drm:intel_wait_for_vblank], vblank wait timed out [drm:intel_update_fbc], [drm:intel_update_fbc], no output, disabling [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [drm:i915_get_vblank_timestamp], crtc 1 is disabled [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [drm:intel_update_fbc], [drm:intel_update_fbc], no output, disabling [drm:init_status_page], render ring hws offset: 0x00000000 [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000 [drm:init_status_page], blt ring hws offset: 0x00042000 [drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000 [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1 [drm:intel_crt_detect], CRT detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:drm_mode_debug_printmodeline], Modeline 17:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 16:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 19:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 18:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 21:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 34:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [drm:drm_setup_crtcs], [drm:drm_enable_connectors], connector 5 enabled? yes [drm:drm_enable_connectors], connector 12 enabled? yes [drm:drm_target_preferred], looking for cmdline mode on connector 5 [drm:drm_target_preferred], looking for preferred mode on connector 5 [drm:drm_target_preferred], found mode 1920x1080 [drm:drm_target_preferred], looking for cmdline mode on connector 12 [drm:drm_target_preferred], looking for preferred mode on connector 12 [drm:drm_target_preferred], found mode 1920x1200 [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4 [drm:intelfb_create], allocated 1920x1200 fb: 0x00063000, bo ffff8801381c4200 fbcon: inteldrmfb (fb0) is primary device [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] fbcon_init: detected unhandled fb_set_par error, error code -22 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 38:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 38:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:drm_crtc_helper_set_mode], [CRTC:4] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [drm:ironlake_crtc_mode_set], Mode for pipe B: [drm:drm_mode_debug_printmodeline], Modeline 38:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:intel_wait_for_vblank], vblank wait timed out [drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6 [drm:ironlake_check_srwm], watermark 2: display plane 22, fbc lines 3, cursor 6 [drm:ironlake_check_srwm], watermark 3: display plane 108, fbc lines 3, cursor 6 [drm:drm_crtc_helper_set_mode], [ENCODER:13:DAC-13] set [MODE:38:1920x1200] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6 [drm:ironlake_check_srwm], watermark 2: display plane 22, fbc lines 3, cursor 6 [drm:ironlake_check_srwm], watermark 3: display plane 108, fbc lines 3, cursor 6 [drm:intel_wait_for_vblank], vblank wait timed out [drm:intel_wait_for_vblank], vblank wait timed out [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [drm:gen6_fdi_link_train], FDI train 1 done. [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [drm:gen6_fdi_link_train], FDI train 2 done. [drm:gen6_fdi_link_train], FDI train done. [drm:intel_prepare_page_flip], preparing flip with no unpin work? [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] set DPMS on [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [drm:ironlake_crtc_dpms], crtc 0/0 dpms off Console: switching to colour frame buffer device 240x67 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm:intel_opregion_gse_intr], non asle set request?? [drm:intel_panel_get_max_backlight], max backlight PWM = 4437 [drm:intel_opregion_gse_intr], PWM freq is not supported [drm:intel_opregion_gse_intr], non asle set request?? [drm:intel_panel_get_max_backlight], max backlight PWM = 4437 [drm:intel_opregion_gse_intr], PWM freq is not supported acpi device:01: registered as cooling_device8 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 41 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xd2628000 port 0xd2628100 irq 41 ata2: SATA max UDMA/133 abar m2048@0xd2628000 port 0xd2628180 irq 41 ata3: DUMMY ata4: SATA max UDMA/133 abar m2048@0xd2628000 port 0xd2628280 irq 41 ata5: SATA max UDMA/133 abar m2048@0xd2628000 port 0xd2628300 irq 41 ata6: DUMMY i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 cpuidle: using governor ladder input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type registered taskstats version 1 alps.c: E6 report: 00 00 64 alps.c: E7 report: 10 00 64 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 Refined TSC clocksource calibration: 2192.877 MHz. Switching to clocksource tsc sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT20, max UDMA/66 ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/66 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N LT20 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 560k freed udev[1161]: starting version 164 Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: Copyright(c) 2003-2011 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: pci_resource_len = 0x00002000 iwlagn 0000:03:00.0: pci_resource_base = ffffc900050a4000 iwlagn 0000:03:00.0: HW Revision ID = 0x35 iwlagn 0000:03:00.0: irq 42 for MSI/MSI-X iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6 iwlagn 0000:03:00.0: Device SKU: 0X1f0 iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k e1000e: Copyright(c) 1999 - 2011 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 43 for MSI/MSI-X usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:53:50:fa e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3 ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr ehci_hcd 0000:00:1a.0: support lpm ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: supports USB remote wakeup ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd262a000 ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.1.4-gentoo ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT hub 1-0:1.0: port 1: status 0501 change 0001 firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 firewire_ohci 0000:0d:00.3: setting latency timer to 64 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman hda_codec: CX20590: BIOS auto-probing. firewire_ohci 0000:0d:00.3: irq 45 for MSI/MSI-X firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller drivers/usb/core/inode.c: creating file '002' ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3 ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr ehci_hcd 0000:00:1d.0: support lpm ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: supports USB remote wakeup ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd2629000 ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: default language 0x0409 usb usb2: udev 1, busnum 2, minor = 128 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.1.4-gentoo ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 20ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000 hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1a.0: port 1 high speed ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT hub 2-0:1.0: port 1: status 0501 change 0001 usb 1-1: new high speed USB device number 2 using ehci_hcd ehci_hcd 0000:00:1a.0: port 1 high speed ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5) sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:0d:00.0: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA ehci_hcd 0000:00:1a.0: set dev address 2 for port 1 ehci_hcd 0000:00:1a.0: LPM: no device attached usb 1-1: udev 2, busnum 1, minor = 1 usb 1-1: New USB device found, idVendor=8087, idProduct=0024 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) hub 1-1:1.0: usb_probe_interface hub 1-1:1.0: usb_probe_interface - got id hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected hub 1-1:1.0: standalone hub hub 1-1:1.0: individual port power switching hub 1-1:1.0: individual port over-current protection hub 1-1:1.0: Single TT hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-1:1.0: power on to power good time: 100ms hub 1-1:1.0: local power source is good hub 1-1:1.0: enabling power on all ports drivers/usb/core/inode.c: creating file '002' hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000 hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT hub 1-1:1.0: port 3: status 0101 change 0001 hub 1-1:1.0: port 4: status 0101 change 0001 hub 1-1:1.0: port 5: status 0101 change 0001 hub 1-1:1.0: port 6: status 0101 change 0001 usb 2-1: new high speed USB device number 2 using ehci_hcd ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT usb 1-1: link qh256-0001/ffff880136118d80 start 1 [1/0 us] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 ehci_hcd 0000:00:1d.0: LPM: no device attached usb 2-1: udev 2, busnum 2, minor = 129 usb 2-1: New USB device found, idVendor=8087, idProduct=0024 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: usb_probe_device usb 2-1: configuration #1 chosen from 1 choice usb 2-1: adding 2-1:1.0 (config #1, interface 0) hub 2-1:1.0: usb_probe_interface hub 2-1:1.0: usb_probe_interface - got id hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected hub 2-1:1.0: standalone hub hub 2-1:1.0: individual port power switching hub 2-1:1.0: individual port over-current protection hub 2-1:1.0: Single TT hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 2-1:1.0: power on to power good time: 100ms hub 2-1:1.0: local power source is good hub 2-1:1.0: enabling power on all ports drivers/usb/core/inode.c: creating file '002' hub 1-1:1.0: state 7 ports 6 chg 0078 evt 0000 hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s firewire_core: created device fw0: GUID f0def1ff5350faff, S400 usb 1-1.3: new full speed USB device number 3 using ehci_hcd hub 1-1:1.0: port 3 not reset yet, waiting 10ms hub 2-1:1.0: port 4: status 0101 change 0001 usb 1-1.3: ep0 maxpacket = 8 usb 1-1.3: default language 0x0409 usb 1-1.3: udev 3, busnum 1, minor = 2 usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.3: Product: Biometric Coprocessor usb 1-1.3: Manufacturer: UPEK usb 1-1.3: usb_probe_device usb 1-1.3: configuration #1 chosen from 1 choice usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) drivers/usb/core/inode.c: creating file '003' hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s hub 1-1:1.0: port 4 not reset yet, waiting 10ms usb 2-1: link qh256-0001/ffff880138c9d300 start 1 [1/0 us] usb 1-1.4: new full speed USB device number 4 using ehci_hcd hub 1-1:1.0: port 4 not reset yet, waiting 10ms usb 1-1.4: skipped 1 descriptor after interface usb 1-1.4: default language 0x0409 usb 1-1.4: udev 4, busnum 1, minor = 3 usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.4: Product: Broadcom Bluetooth Device usb 1-1.4: Manufacturer: Broadcom Corp usb 1-1.4: SerialNumber: EC55F9FF3026 usb 1-1.4: usb_probe_device usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2) usb 1-1.4: adding 1-1.4:1.3 (config #1, interface 3) drivers/usb/core/inode.c: creating file '004' hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s hub 1-1:1.0: port 5 not reset yet, waiting 10ms usb 1-1.5: new high speed USB device number 5 using ehci_hcd hub 1-1:1.0: port 5 not reset yet, waiting 10ms usb 1-1.5: udev 5, busnum 1, minor = 4 usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1.5: usb_probe_device usb 1-1.5: configuration #1 chosen from 1 choice usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0) hub 1-1.5:1.0: usb_probe_interface hub 1-1.5:1.0: usb_probe_interface - got id hub 1-1.5:1.0: USB hub found hub 1-1.5:1.0: 6 ports detected hub 1-1.5:1.0: standalone hub hub 1-1.5:1.0: individual port power switching hub 1-1.5:1.0: individual port over-current protection hub 1-1.5:1.0: TT per port hub 1-1.5:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-1.5:1.0: Port indicators are supported hub 1-1.5:1.0: power on to power good time: 100ms hub 1-1.5:1.0: local power source is good hub 1-1.5:1.0: enabling power on all ports drivers/usb/core/inode.c: creating file '005' hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s hub 1-1:1.0: port 6 not reset yet, waiting 10ms usb 1-1.6: new high speed USB device number 6 using ehci_hcd Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized hub 1-1:1.0: port 6 not reset yet, waiting 10ms hub 1-1.5:1.0: port 2: status 0301 change 0001 hub 1-1.5:1.0: port 3: status 0301 change 0001 usb 1-1.6: skipped 1 descriptor after configuration usb 1-1.6: skipped 5 descriptors after interface usb 1-1.6: skipped 1 descriptor after endpoint usb 1-1.6: skipped 20 descriptors after interface usb 1-1.6: default language 0x0409 usb 1-1.6: udev 6, busnum 1, minor = 5 usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.6: Product: Integrated Camera usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. usb 1-1.6: usb_probe_device usb 1-1.6: configuration #1 chosen from 1 choice usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0) usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1) drivers/usb/core/inode.c: creating file '006' hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0020 hub 2-1:1.0: state 7 ports 8 chg 0010 evt 0000 hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s Bluetooth: Generic Bluetooth USB driver ver 0.6 btusb 1-1.4:1.0: usb_probe_interface btusb 1-1.4:1.0: usb_probe_interface - got id hub 2-1:1.0: port 4 not reset yet, waiting 10ms btusb 1-1.4:1.2: usb_probe_interface btusb 1-1.4:1.2: usb_probe_interface - got id btusb 1-1.4:1.3: usb_probe_interface btusb 1-1.4:1.3: usb_probe_interface - got id usbcore: registered new interface driver btusb usb 1-1.4: link qh1-0601/ffff88013935bb00 start 0 [1/2 us] usb 1-1.5: link qh256-0001/ffff880135829800 start 3 [1/0 us] usb 2-1.4: new high speed USB device number 3 using ehci_hcd hub 2-1:1.0: port 4 not reset yet, waiting 10ms usb 2-1.4: skipped 3 descriptors after interface usb 2-1.4: skipped 4 descriptors after interface usb 2-1.4: skipped 4 descriptors after interface usb 2-1.4: skipped 2 descriptors after interface usb 2-1.4: skipped 5 descriptors after interface usb 2-1.4: skipped 2 descriptors after interface usb 2-1.4: skipped 4 descriptors after interface usb 2-1.4: skipped 3 descriptors after interface usb 2-1.4: skipped 4 descriptors after interface usb 2-1.4: skipped 4 descriptors after interface usb 2-1.4: skipped 2 descriptors after interface usb 2-1.4: skipped 5 descriptors after interface usb 2-1.4: skipped 2 descriptors after interface usb 2-1.4: default language 0x0409 usb 2-1.4: udev 3, busnum 2, minor = 130 usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911 usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.4: Product: F5521gw usb 2-1.4: Manufacturer: Lenovo usb 2-1.4: SerialNumber: 2CBEDDE1249B3640 usb 2-1.4: usb_probe_device usb 2-1.4: configuration #1 chosen from 3 choices usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0) usb 2-1.4: adding 2-1.4:1.1 (config #1, interface 1) usb 2-1.4: adding 2-1.4:1.2 (config #1, interface 2) usb 2-1.4: adding 2-1.4:1.3 (config #1, interface 3) usb 2-1.4: adding 2-1.4:1.4 (config #1, interface 4) usb 2-1.4: adding 2-1.4:1.5 (config #1, interface 5) usb 2-1.4: adding 2-1.4:1.6 (config #1, interface 6) usb 2-1.4: adding 2-1.4:1.7 (config #1, interface 7) usb 2-1.4: adding 2-1.4:1.8 (config #1, interface 8) usb 2-1.4: adding 2-1.4:1.9 (config #1, interface 9) usb 2-1.4: adding 2-1.4:1.10 (config #1, interface 10) drivers/usb/core/inode.c: creating file '003' hub 1-1.5:1.0: state 7 ports 6 chg 000c evt 0000 hub 1-1.5:1.0: port 2, status 0301, change 0000, 1.5 Mb/s hub 1-1.5:1.0: port 2 not reset yet, waiting 10ms usb 1-1.5.2: new low speed USB device number 7 using ehci_hcd hub 1-1.5:1.0: port 2 not reset yet, waiting 10ms usb 1-1.5.2: skipped 1 descriptor after interface usb 1-1.5.2: default language 0x0409 usb 1-1.5.2: udev 7, busnum 1, minor = 6 usb 1-1.5.2: New USB device found, idVendor=046d, idProduct=c501 usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.5.2: Product: USB Receiver usb 1-1.5.2: Manufacturer: Logitech usb 1-1.5.2: usb_probe_device usb 1-1.5.2: configuration #1 chosen from 1 choice usb 1-1.5.2: adding 1-1.5.2:1.0 (config #1, interface 0) drivers/usb/core/inode.c: creating file '007' hub 1-1.5:1.0: port 3, status 0301, change 0000, 1.5 Mb/s hub 1-1.5:1.0: port 3 not reset yet, waiting 10ms usb 1-1.5.3: new low speed USB device number 8 using ehci_hcd hub 1-1.5:1.0: port 3 not reset yet, waiting 10ms usbhid 1-1.5.2:1.0: usb_probe_interface usbhid 1-1.5.2:1.0: usb_probe_interface - got id input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input6 generic-usb 0003:046D:C501.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.5.2/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 1-1.5.2: link qh8-0601/ffff880135b0ff80 start 4 [1/2 us] usb 1-1.5.3: skipped 1 descriptor after interface usb 1-1.5.3: skipped 1 descriptor after interface usb 1-1.5.3: default language 0x0409 usb 1-1.5.3: udev 8, busnum 1, minor = 7 usb 1-1.5.3: New USB device found, idVendor=046d, idProduct=c308 usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.5.3: Product: Logitech USB Keyboard usb 1-1.5.3: Manufacturer: Logitech usb 1-1.5.3: usb_probe_device usb 1-1.5.3: configuration #1 chosen from 1 choice usb 1-1.5.3: adding 1-1.5.3:1.0 (config #1, interface 0) usbhid 1-1.5.3:1.0: usb_probe_interface usbhid 1-1.5.3:1.0: usb_probe_interface - got id usb 1-1.5.2: unlink qh8-0601/ffff880135b0ff80 start 4 [1/2 us] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.0/input/input7 usb 1-1.5.3: link qh8-0601/ffff880135b0fd80 start 5 [1/2 us] generic-usb 0003:046D:C308.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.5.3/input0 usb 1-1.5.3: adding 1-1.5.3:1.1 (config #1, interface 1) usbhid 1-1.5.3:1.1: usb_probe_interface usbhid 1-1.5.3:1.1: usb_probe_interface - got id input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.1/input/input8 usb 1-1.5.3: link qh32-0601/ffff880135b0fc80 start 6 [1/2 us] generic-usb 0003:046D:C308.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.5.3/input1 drivers/usb/core/inode.c: creating file '008' hub 1-1.5:1.0: state 7 ports 6 chg 0000 evt 0008 usb 1-1.4: unlink qh1-0601/ffff88013935bb00 start 0 [1/2 us] usb 1-1: clear tt buffer port 4, a4 ep2 t04048d82 EXT4-fs (sda3): re-mounted. Opts: (null) [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40008, result 1 [drm:intel_crt_detect], CRT detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 1 to 1 Adding 7999484k swap on /dev/sda2. Priority:-1 extents:1 across:7999484k e1000e 0000:00:19.0: irq 43 for MSI/MSI-X e1000e 0000:00:19.0: irq 43 for MSI/MSI-X iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S iwlagn 0000:03:00.0: Radio type=0x0-0x3-0x1 iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S iwlagn 0000:03:00.0: Radio type=0x0-0x3-0x1 e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:i915_driver_open], [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:i915_driver_open], [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40008, result 1 [drm:intel_crt_detect], CRT detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:drm_mode_debug_printmodeline], Modeline 17:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 16:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 19:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 18:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 21:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 34:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40008, result 1 [drm:intel_crt_detect], CRT detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:drm_mode_debug_printmodeline], Modeline 17:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 16:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 19:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 18:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [drm:drm_mode_debug_printmodeline], Modeline 21:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 34:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_mode_addfb], [FB:40] [drm:drm_mode_setcrtc], [CRTC:3] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 41:"1400x1050" 0 122000 1400 1488 1640 1880 1050 1052 1064 1082 0x0 0x5 [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 41:"1400x1050" 0 122000 1400 1488 1640 1880 1050 1052 1064 1082 0x0 0x5 [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] detected fb_set_par error, error code: -22 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:3] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode! [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40008, result 1 [drm:intel_crt_detect], CRT detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 1 to 1