[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.2.0-rc3-next-20111201_64+ (ku@bellona) (gcc version 4.6.2 (SUSE Linux) ) #1616 SMP Thu Dec 1 14:12:38 CET 2011 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-latest_2 root=/dev/md0 ipv6.disable=1 debug rw reboot=a,w resume=/dev/sdb5 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable) [ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000af5b0000 (usable) [ 0.000000] BIOS-e820: 00000000af5b0000 - 00000000af5be000 (ACPI data) [ 0.000000] BIOS-e820: 00000000af5be000 - 00000000af5f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000af5f0000 - 00000000af600000 (reserved) [ 0.000000] BIOS-e820: 00000000fed90000 - 00000000fed94000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001cc000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x1cc000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask F80000000 write-back [ 0.000000] 4 base 180000000 mask FC0000000 write-back [ 0.000000] 5 base 1C0000000 mask FF8000000 write-back [ 0.000000] 6 base 1C8000000 mask FFC000000 write-back [ 0.000000] 7 base 0AF600000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000af600000 - 00000000af800000 (usable) ==> (reserved) [ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xaf5b0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000af5b0000 [ 0.000000] 0000000000 - 00af400000 page 2M [ 0.000000] 00af400000 - 00af5b0000 page 4k [ 0.000000] kernel direct mapping tables up to af5b0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001cc000000 [ 0.000000] 0100000000 - 01cc000000 page 2M [ 0.000000] kernel direct mapping tables up to 1cc000000 @ af5a7000-af5b0000 [ 0.000000] ACPI: RSDP 00000000000f9990 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000af5b0100 00064 (v01 A M I OEMXSDT 05000708 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000af5b0290 000F4 (v03 A M I OEMFACP 05000708 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000af5b0490 06643 (v01 SDBLI9 SDBLI944 00000044 INTL 20051117) [ 0.000000] ACPI: FACS 00000000af5be000 00040 [ 0.000000] ACPI: APIC 00000000af5b0390 0006C (v01 A M I OEMAPIC 05000708 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000af5b0450 0003C (v01 A M I OEMMCFG 05000708 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000af5be040 00079 (v01 A M I AMI_OEM 05000708 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000af5b6ae0 00038 (v01 A M I OEMHPET 05000708 MSFT 00000097) [ 0.000000] ACPI: GSCI 00000000af5be0c0 02024 (v01 A M I GMCHSCI 05000708 MSFT 00000097) [ 0.000000] ACPI: iEIT 00000000af5c00f0 000B0 (v01 A M I EITTABLE 05000708 MSFT 00000097) [ 0.000000] ACPI: DMAR 00000000af5b6bc0 00118 (v01 A M I OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00073fffff] PMD -> [ffff8801c5600000-ffff8801cb5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001cc000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000af5b0 [ 0.000000] 0: 0x00100000 -> 0x001cc000 [ 0.000000] On node 0 totalpages: 1553739 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3926 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 697840 pages, LIFO batch:31 [ 0.000000] Normal zone: 13056 pages used for memmap [ 0.000000] Normal zone: 822528 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000af5b0000 - 00000000af5be000 [ 0.000000] PM: Registered nosave memory: 00000000af5be000 - 00000000af5f0000 [ 0.000000] PM: Registered nosave memory: 00000000af5f0000 - 00000000af600000 [ 0.000000] PM: Registered nosave memory: 00000000af600000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000 [ 0.000000] PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at af600000 (gap: af600000:4f790000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff8801cbc00000 s70720 r8192 d23488 u524288 [ 0.000000] pcpu-alloc: s70720 r8192 d23488 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1524294 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-latest_2 root=/dev/md0 ipv6.disable=1 debug rw reboot=a,w resume=/dev/sdb5 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 6025700k/7536640k available (6357k kernel code, 1321684k absent, 189256k reserved, 4359k data, 480k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 25165824 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2992.775 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.55 BogoMIPS (lpj=11971100) [ 0.004106] pid_max: default: 32768 minimum: 301 [ 0.004190] Mount-cache hash table entries: 256 [ 0.004360] Initializing cgroup subsys debug [ 0.004410] Initializing cgroup subsys cpuacct [ 0.004460] Initializing cgroup subsys memory [ 0.004515] Initializing cgroup subsys devices [ 0.004564] Initializing cgroup subsys freezer [ 0.004634] Disabled fast string operations [ 0.004684] CPU: Physical Processor ID: 0 [ 0.004731] CPU: Processor Core ID: 0 [ 0.004778] mce: CPU supports 6 MCE banks [ 0.004829] CPU0: Thermal monitoring enabled (TM2) [ 0.004880] using mwait in idle threads. [ 0.004939] ACPI: Core revision 20110623 [ 0.008562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.049555] CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b [ 0.052002] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms [ 0.052002] APIC delta adjusted to PM-Timer: 2078108 (2493720) [ 0.052002] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.052002] PEBS disabled due to CPU errata. [ 0.052002] ... version: 2 [ 0.052002] ... bit width: 40 [ 0.052002] ... generic registers: 2 [ 0.052002] ... value mask: 000000ffffffffff [ 0.052002] ... max period: 000000007fffffff [ 0.052002] ... fixed-purpose events: 3 [ 0.052002] ... event mask: 0000000700000003 [ 0.052002] NMI watchdog enabled, takes one hw-pmu counter. [ 0.052002] Booting Node 0, Processors #1 [ 0.052002] smpboot cpu 1: start_ip = 97000 [ 0.064027] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064136] Brought up 2 CPUs [ 0.064213] Total of 2 processors activated (11971.10 BogoMIPS). [ 0.065706] devtmpfs: initialized [ 0.065706] PM: Registering ACPI NVS region at af5be000 (204800 bytes) [ 0.065706] NET: Registered protocol family 16 [ 0.065706] ACPI: bus type pci registered [ 0.065706] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.065706] PCI: not using MMCONFIG [ 0.065706] PCI: Using configuration type 1 for base access [ 0.068028] bio: create slab at 0 [ 0.072091] ACPI: Added _OSI(Module Device) [ 0.072101] ACPI: Added _OSI(Processor Device) [ 0.072181] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.072261] ACPI: Added _OSI(Processor Aggregator Device) [ 0.073147] ACPI: EC: Look up EC in DSDT [ 0.074146] ACPI: Executed 1 blocks of module-level executable AML code [ 0.075609] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.076123] ACPI: Interpreter enabled [ 0.076204] ACPI: (supports S0 S1 S3 S4 S5) [ 0.076479] ACPI: Using IOAPIC for interrupt routing [ 0.076579] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.077586] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.116106] ACPI: No dock devices found. [ 0.116188] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.116408] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.116518] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.116518] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.116518] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.116518] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.116566] pci_root PNP0A08:00: host bridge window [mem 0xaf600000-0xffffffff] (ignored) [ 0.116693] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600 [ 0.116810] pci 0000:00:02.0: [8086:29c2] type 0 class 0x000300 [ 0.116899] pci 0000:00:02.0: reg 10: [mem 0xfeb80000-0xfebfffff] [ 0.116985] pci 0000:00:02.0: reg 14: [io 0xec00-0xec07] [ 0.117069] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] [ 0.117156] pci 0000:00:02.0: reg 1c: [mem 0xfea00000-0xfeafffff] [ 0.117273] pci 0000:00:03.0: [8086:29c4] type 0 class 0x000780 [ 0.117376] pci 0000:00:03.0: reg 10: [mem 0xfeb7fc00-0xfeb7fc0f 64bit] [ 0.117537] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.117624] pci 0000:00:03.0: PME# disabled [ 0.117712] pci 0000:00:03.1: [8086:29c5] type 0 class 0x000780 [ 0.117807] pci 0000:00:03.1: reg 10: [mem 0xfeb7f800-0xfeb7f80f 64bit] [ 0.117968] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.118053] pci 0000:00:03.1: PME# disabled [ 0.118153] pci 0000:00:03.2: [8086:29c6] type 0 class 0x000101 [ 0.118254] pci 0000:00:03.2: reg 10: [io 0xe880-0xe887] [ 0.118344] pci 0000:00:03.2: reg 14: [io 0xe800-0xe803] [ 0.118435] pci 0000:00:03.2: reg 18: [io 0xe480-0xe487] [ 0.120016] pci 0000:00:03.2: reg 1c: [io 0xe400-0xe403] [ 0.120106] pci 0000:00:03.2: reg 20: [io 0xe080-0xe08f] [ 0.120224] pci 0000:00:03.3: [8086:29c7] type 0 class 0x000700 [ 0.120325] pci 0000:00:03.3: reg 10: [io 0xe000-0xe007] [ 0.120415] pci 0000:00:03.3: reg 14: [mem 0xfeb7e000-0xfeb7efff] [ 0.120631] pci 0000:00:19.0: [8086:10bd] type 0 class 0x000200 [ 0.120737] pci 0000:00:19.0: reg 10: [mem 0xfeb40000-0xfeb5ffff] [ 0.120832] pci 0000:00:19.0: reg 14: [mem 0xfeb7d000-0xfeb7dfff] [ 0.120926] pci 0000:00:19.0: reg 18: [io 0xdc00-0xdc1f] [ 0.121087] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.121176] pci 0000:00:19.0: PME# disabled [ 0.121282] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.121416] pci 0000:00:1a.0: reg 20: [io 0xd880-0xd89f] [ 0.121558] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.121692] pci 0000:00:1a.1: reg 20: [io 0xd800-0xd81f] [ 0.121835] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.121969] pci 0000:00:1a.2: reg 20: [io 0xd480-0xd49f] [ 0.122123] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.122229] pci 0000:00:1a.7: reg 10: [mem 0xfeb7f400-0xfeb7f7ff] [ 0.122409] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.122498] pci 0000:00:1a.7: PME# disabled [ 0.122613] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.122716] pci 0000:00:1b.0: reg 10: [mem 0xfeb78000-0xfeb7bfff 64bit] [ 0.122886] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.122974] pci 0000:00:1b.0: PME# disabled [ 0.123077] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.123251] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.123340] pci 0000:00:1c.0: PME# disabled [ 0.123448] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604 [ 0.123622] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.123711] pci 0000:00:1c.2: PME# disabled [ 0.123820] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.124045] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f] [ 0.124241] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.124375] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f] [ 0.124518] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.124652] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f] [ 0.124808] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.124911] pci 0000:00:1d.7: reg 10: [mem 0xfeb7f000-0xfeb7f3ff] [ 0.125092] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.125181] pci 0000:00:1d.7: PME# disabled [ 0.125283] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.125445] pci 0000:00:1f.0: [8086:2910] type 0 class 0x000601 [ 0.125644] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106 [ 0.125753] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07] [ 0.125846] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883] [ 0.125939] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807] [ 0.126032] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483] [ 0.126124] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f] [ 0.126218] pci 0000:00:1f.2: reg 24: [mem 0xfeb7c800-0xfeb7cfff] [ 0.126362] pci 0000:00:1f.2: PME# supported from D3hot [ 0.126449] pci 0000:00:1f.2: PME# disabled [ 0.126552] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.126654] pci 0000:00:1f.3: reg 10: [mem 0xfeb7c400-0xfeb7c4ff 64bit] [ 0.126767] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.126891] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180 [ 0.126996] pci 0000:00:1f.6: reg 10: [mem 0xfeb77000-0xfeb77fff 64bit] [ 0.127210] pci 0000:00:1c.0: PCI bridge to [bus 01-02] [ 0.127297] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.127386] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfe5fffff] [ 0.127480] pci 0000:00:1c.0: bridge window [mem 0xbdf00000-0xbfefffff 64bit pref] [ 0.127706] pci 0000:03:00.0: [104c:8231] type 1 class 0x000604 [ 0.127995] pci 0000:03:00.0: supports D1 D2 [ 0.128063] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.128218] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.128305] pci 0000:00:1c.2: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.128503] pci 0000:04:00.0: [104c:8235] type 0 class 0x000c00 [ 0.128616] pci 0000:04:00.0: reg 10: [mem 0xfe6ff800-0xfe6fffff] [ 0.128716] pci 0000:04:00.0: reg 14: [mem 0xfe6f8000-0xfe6fbfff] [ 0.128928] pci 0000:04:00.0: supports D1 D2 [ 0.129007] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot [ 0.129096] pci 0000:04:00.0: PME# disabled [ 0.129252] pci 0000:03:00.0: PCI bridge to [bus 04-04] [ 0.129346] pci 0000:03:00.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.129492] pci 0000:05:00.0: [8086:100e] type 0 class 0x000200 [ 0.129594] pci 0000:05:00.0: reg 10: [mem 0xfe7e0000-0xfe7fffff] [ 0.129686] pci 0000:05:00.0: reg 14: [mem 0xfe7c0000-0xfe7dffff] [ 0.129778] pci 0000:05:00.0: reg 18: [io 0xbc00-0xbc3f] [ 0.129893] pci 0000:05:00.0: reg 30: [mem 0xfe7a0000-0xfe7bffff pref] [ 0.130022] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.130109] pci 0000:05:00.0: PME# disabled [ 0.130235] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.130323] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.130409] pci 0000:00:1e.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.130500] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.130621] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.130759] pci_bus 0000:00: on NUMA node 0 [ 0.130840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.130982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.131144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.131249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.131410] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.131579] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.136320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 12 14 15) [ 0.136568] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.140332] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *12 14 15) [ 0.140853] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12 14 *15) [ 0.141373] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 *14 15) [ 0.141892] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15) [ 0.142413] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 12 14 15) [ 0.142932] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.143441] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.143441] vgaarb: loaded [ 0.143441] vgaarb: bridge control possible 0000:00:02.0 [ 0.143441] SCSI subsystem initialized [ 0.144047] libata version 3.00 loaded. [ 0.144100] usbcore: registered new interface driver usbfs [ 0.144107] usbcore: registered new interface driver hub [ 0.144107] usbcore: registered new device driver usb [ 0.144107] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.144107] PCI: Using ACPI for IRQ routing [ 0.154232] PCI: pci_cache_line_size set to 64 bytes [ 0.154413] reserve RAM buffer: 000000000009cc00 - 000000000009ffff [ 0.154465] reserve RAM buffer: 00000000af5b0000 - 00000000afffffff [ 0.154596] cfg80211: Calling CRDA to update world regulatory domain [ 0.154596] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.154596] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.154596] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.160633] Switching to clocksource hpet [ 0.160633] FS-Cache: Loaded [ 0.160855] CacheFiles: Loaded [ 0.160908] pnp: PnP ACPI init [ 0.160993] ACPI: bus type pnp registered [ 0.161123] pnp 00:00: [bus 00-ff] [ 0.161202] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.161282] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.161362] pnp 00:00: [io 0x0d00-0xffff window] [ 0.161443] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.161526] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.161608] pnp 00:00: [mem 0xaf600000-0xffffffff window] [ 0.161754] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.161879] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.162012] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.162099] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.162207] pnp 00:02: [dma 4] [ 0.162285] pnp 00:02: [io 0x0000-0x000f] [ 0.162364] pnp 00:02: [io 0x0081-0x0083] [ 0.162444] pnp 00:02: [io 0x0087] [ 0.162522] pnp 00:02: [io 0x0089-0x008b] [ 0.162601] pnp 00:02: [io 0x008f] [ 0.162678] pnp 00:02: [io 0x00c0-0x00df] [ 0.162801] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.162893] pnp 00:03: [io 0x0070-0x0071] [ 0.162980] pnp 00:03: [irq 8] [ 0.163100] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.163215] pnp 00:04: [io 0x0061] [ 0.163358] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.163450] pnp 00:05: [io 0x00f0-0x00ff] [ 0.163533] pnp 00:05: [irq 13] [ 0.163654] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.163894] pnp 00:06: [io 0x03f8-0x03ff] [ 0.163980] pnp 00:06: [irq 4] [ 0.164076] pnp 00:06: [dma 0 disabled] [ 0.164230] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.164638] pnp 00:07: [io 0x0378-0x037f] [ 0.164718] pnp 00:07: [io 0x0778-0x077f] [ 0.164800] pnp 00:07: [irq 7] [ 0.164877] pnp 00:07: [dma 0 disabled] [ 0.165067] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.165242] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.165326] pnp 00:08: [io 0x0a20-0x0a3f] [ 0.165405] pnp 00:08: [io 0x0a00-0x0a0f] [ 0.165485] pnp 00:08: [io 0x0a10-0x0a1f] [ 0.165565] pnp 00:08: [io 0x0a40-0x0a5f] [ 0.165703] system 00:08: [io 0x0a20-0x0a3f] has been reserved [ 0.165787] system 00:08: [io 0x0a00-0x0a0f] has been reserved [ 0.165871] system 00:08: [io 0x0a10-0x0a1f] has been reserved [ 0.165954] system 00:08: [io 0x0a40-0x0a5f] has been reserved [ 0.166038] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166173] pnp 00:09: [io 0x0010-0x001f] [ 0.166252] pnp 00:09: [io 0x0022-0x003f] [ 0.166331] pnp 00:09: [io 0x0044-0x005f] [ 0.166411] pnp 00:09: [io 0x0062-0x0063] [ 0.166491] pnp 00:09: [io 0x0065-0x006f] [ 0.166571] pnp 00:09: [io 0x0072-0x007f] [ 0.166650] pnp 00:09: [io 0x0080] [ 0.166729] pnp 00:09: [io 0x0084-0x0086] [ 0.166808] pnp 00:09: [io 0x0088] [ 0.166885] pnp 00:09: [io 0x008c-0x008e] [ 0.166965] pnp 00:09: [io 0x0090-0x009f] [ 0.167044] pnp 00:09: [io 0x00a2-0x00bf] [ 0.167124] pnp 00:09: [io 0x00e0-0x00ef] [ 0.167203] pnp 00:09: [io 0x04d0-0x04d1] [ 0.167282] pnp 00:09: [io 0x0800-0x087f] [ 0.167362] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] [ 0.167444] pnp 00:09: [io 0x0480-0x04bf] [ 0.167524] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.167605] pnp 00:09: [mem 0xfed20000-0xfed8ffff] [ 0.167759] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.167843] system 00:09: [io 0x0800-0x087f] has been reserved [ 0.167926] system 00:09: [io 0x0480-0x04bf] has been reserved [ 0.168036] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.168121] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.168208] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.168318] pnp 00:0a: [io 0x0060] [ 0.168397] pnp 00:0a: [io 0x0064] [ 0.168531] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.168653] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 0.168781] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.168897] pnp 00:0c: [mem 0xffb00000-0xffbfffff] [ 0.168978] pnp 00:0c: [mem 0xfff00000-0xffffffff] [ 0.169104] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active) [ 0.169216] pnp 00:0d: [mem 0xffc00000-0xffefffff] [ 0.169354] system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved [ 0.169440] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.169559] pnp 00:0e: [mem 0xfec00000-0xfec00fff] [ 0.169640] pnp 00:0e: [mem 0xfee00000-0xfee00fff] [ 0.169778] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.169865] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.169951] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170057] pnp 00:0f: [mem 0xe0000000-0xefffffff] [ 0.170195] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved [ 0.170281] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170421] pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.170568] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170678] pnp 00:11: [mem 0xfed90000-0xfed90fff] [ 0.170825] system 00:11: [mem 0xfed90000-0xfed90fff] has been reserved [ 0.170911] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.171021] pnp 00:12: [mem 0xfed91000-0xfed91fff] [ 0.171169] system 00:12: [mem 0xfed91000-0xfed91fff] has been reserved [ 0.171256] system 00:12: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.171364] pnp 00:13: [mem 0xfed92000-0xfed92fff] [ 0.171509] system 00:13: [mem 0xfed92000-0xfed92fff] has been reserved [ 0.171595] system 00:13: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.171705] pnp 00:14: [mem 0xfed93000-0xfed93fff] [ 0.171850] system 00:14: [mem 0xfed93000-0xfed93fff] has been reserved [ 0.171936] system 00:14: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.172114] pnp 00:15: [mem 0x00000000-0x0009ffff] [ 0.172197] pnp 00:15: [mem 0x000c0000-0x000cffff] [ 0.172278] pnp 00:15: [mem 0x000e0000-0x000fffff] [ 0.172359] pnp 00:15: [mem 0x00100000-0xaf5fffff] [ 0.172440] pnp 00:15: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.172593] system 00:15: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.172680] system 00:15: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.172766] system 00:15: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.172851] system 00:15: [mem 0x00100000-0xaf5fffff] could not be reserved [ 0.172938] system 00:15: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.173105] pnp: PnP ACPI: found 22 devices [ 0.173185] ACPI: ACPI bus type pnp unregistered [ 0.182316] PCI: max bus depth: 2 pci_try_num: 3 [ 0.182442] pci 0000:00:1c.2: BAR 9: assigned [mem 0xb0000000-0xb01fffff 64bit pref] [ 0.182563] pci 0000:00:1c.2: BAR 7: assigned [io 0x1000-0x1fff] [ 0.182647] pci 0000:00:1c.0: PCI bridge to [bus 01-02] [ 0.182731] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.182819] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfe5fffff] [ 0.182907] pci 0000:00:1c.0: bridge window [mem 0xbdf00000-0xbfefffff 64bit pref] [ 0.183033] pci 0000:03:00.0: PCI bridge to [bus 04-04] [ 0.183121] pci 0000:03:00.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.183219] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.183303] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.183391] pci 0000:00:1c.2: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.183478] pci 0000:00:1c.2: bridge window [mem 0xb0000000-0xb01fffff 64bit pref] [ 0.183604] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.183687] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.183774] pci 0000:00:1e.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.183879] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.183968] pci 0000:00:1c.0: setting latency timer to 64 [ 0.184073] pci 0000:00:1c.2: enabling device (0106 -> 0107) [ 0.184161] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.184249] pci 0000:00:1c.2: setting latency timer to 64 [ 0.184342] pci 0000:03:00.0: setting latency timer to 64 [ 0.184430] pci 0000:00:1e.0: setting latency timer to 64 [ 0.184514] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.184597] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.184681] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.184764] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfe5fffff] [ 0.184849] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xbfefffff 64bit pref] [ 0.184967] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.185050] pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.185135] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb01fffff 64bit pref] [ 0.185253] pci_bus 0000:04: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.185337] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] [ 0.185420] pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.185504] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.185588] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff] [ 0.185697] NET: Registered protocol family 2 [ 0.185820] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.187012] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.189159] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.189828] TCP: Hash tables configured (established 262144 bind 65536) [ 0.189914] TCP reno registered [ 0.189994] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.190151] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.190379] NET: Registered protocol family 1 [ 0.190561] RPC: Registered named UNIX socket transport module. [ 0.190646] RPC: Registered udp transport module. [ 0.190727] RPC: Registered tcp transport module. [ 0.190807] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.190902] pci 0000:00:02.0: Boot video device [ 0.191158] pci 0000:03:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled [ 0.191295] PCI: CLS 32 bytes, default 64 [ 0.192057] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.192143] Placing 64MB software IO TLB between ffff8800ab5a7000 - ffff8800af5a7000 [ 0.192265] software IO TLB at phys 0xab5a7000 - 0xaf5a7000 [ 0.193703] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.197845] Registering the id_resolver key type [ 0.198075] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.198228] fuse init (API version 7.17) [ 0.198462] msgmni has been set to 11768 [ 0.198842] io scheduler noop registered [ 0.198975] io scheduler cfq registered (default) [ 0.199155] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.199290] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.199550] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.199678] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X [ 0.200027] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.200116] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.200218] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.200305] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.200390] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 0.200477] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.200758] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.200882] ACPI: Power Button [PWRB] [ 0.201026] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.201147] ACPI: Power Button [PWRF] [ 0.202502] Serial: 8250/16550 driver, 3 ports, IRQ sharing enabled [ 0.223214] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.296758] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.312149] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.332364] 0000:00:03.3: ttyS1 at I/O 0xe000 (irq = 17) is a 16550A [ 0.372297] Linux agpgart interface v0.103 [ 0.372498] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 0.372682] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.373984] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.374218] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.374357] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.374480] Hangcheck: Using getrawmonotonic(). [ 0.374610] [drm] Initialized drm 1.1.0 20060810 [ 0.374713] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.374800] i915 0000:00:02.0: setting latency timer to 64 [ 0.420558] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 0.420680] [drm] MTRR allocation failed. Graphics performance may suffer. [ 0.421399] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 0.421486] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.421570] [drm] Driver supports precise vblank timestamp query. [ 0.421677] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.435370] [drm] initialized overlay support [ 0.503787] fbcon: inteldrmfb (fb0) is primary device [ 0.550129] Console: switching to colour frame buffer device 160x64 [ 0.552915] fb0: inteldrmfb frame buffer device [ 0.552932] drm: registered panic notifier [ 0.552954] No ACPI video bus found [ 0.553038] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 0.553189] parport_pc 00:07: reported by Plug and Play ACPI [ 0.553372] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 0.648603] Floppy drive(s): fd0 is 1.44M [ 1.192026] Refined TSC clocksource calibration: 2992.499 MHz. [ 1.192059] Switching to clocksource tsc [ 3.672026] floppy0: no floppy controllers found [ 3.672104] ------------[ cut here ]------------ [ 3.672135] WARNING: at /l/latest/linux/drivers/block/floppy.c:2929 do_fd_request+0xb7/0xc0() [ 3.672176] Hardware name: To Be Filled By O.E.M. [ 3.672200] VFS: do_fd_request called on non-open device [ 3.672227] Modules linked in: [ 3.672249] Pid: 1, comm: swapper/0 Not tainted 3.2.0-rc3-next-20111201_64+ #1616 [ 3.672281] Call Trace: [ 3.672294] [] warn_slowpath_common+0x7a/0xb0 [ 3.672316] [] warn_slowpath_fmt+0x41/0x50 [ 3.672337] [] do_fd_request+0xb7/0xc0 [ 3.672357] [] blk_drain_queue+0x53/0x70 [ 3.672377] [] blk_cleanup_queue+0xd7/0x1d0 [ 3.672399] [] floppy_init+0xd94/0xdce [ 3.672419] [] ? set_cmos+0x6e/0x6e [ 3.672439] [] do_one_initcall+0x3d/0x170 [ 3.672460] [] kernel_init+0xc5/0x13f [ 3.672480] [] kernel_thread_helper+0x4/0x10 [ 3.672501] [] ? start_kernel+0x339/0x339 [ 3.672521] [] ? gs_change+0xb/0xb [ 3.672543] ---[ end trace 0b50c7fc90054b88 ]--- [ 3.672567] ------------[ cut here ]------------ [ 3.672585] WARNING: at /l/latest/linux/drivers/block/floppy.c:2929 do_fd_request+0xb7/0xc0() [ 3.672613] Hardware name: To Be Filled By O.E.M. [ 3.672630] VFS: do_fd_request called on non-open device [ 3.672649] Modules linked in: [ 3.672663] Pid: 1, comm: swapper/0 Tainted: G W 3.2.0-rc3-next-20111201_64+ #1616 [ 3.672691] Call Trace: [ 3.672702] [] warn_slowpath_common+0x7a/0xb0 [ 3.672724] [] warn_slowpath_fmt+0x41/0x50 [ 3.673821] [] do_fd_request+0xb7/0xc0 [ 3.674907] [] blk_drain_queue+0x53/0x70 [ 3.675986] [] blk_cleanup_queue+0xd7/0x1d0 [ 3.676087] [] floppy_init+0xd94/0xdce [ 3.676087] [] ? set_cmos+0x6e/0x6e [ 3.676087] [] do_one_initcall+0x3d/0x170 [ 3.676087] [] kernel_init+0xc5/0x13f [ 3.676087] [] kernel_thread_helper+0x4/0x10 [ 3.676087] [] ? start_kernel+0x339/0x339 [ 3.676087] [] ? gs_change+0xb/0xb [ 3.676087] ---[ end trace 0b50c7fc90054b89 ]--- [ 3.685366] ------------[ cut here ]------------ [ 3.686368] WARNING: at /l/latest/linux/drivers/block/floppy.c:2929 do_fd_request+0xb7/0xc0() [ 3.687391] Hardware name: To Be Filled By O.E.M. [ 3.688403] VFS: do_fd_request called on non-open device [ 3.689358] Modules linked in: [ 3.689358] Pid: 1, comm: swapper/0 Tainted: G W 3.2.0-rc3-next-20111201_64+ #1616 [ 3.689358] Call Trace: [ 3.689358] [] warn_slowpath_common+0x7a/0xb0 [ 3.689358] [] warn_slowpath_fmt+0x41/0x50 [ 3.689358] [] do_fd_request+0xb7/0xc0 [ 3.689358] [] blk_drain_queue+0x53/0x70 [ 3.689358] [] blk_cleanup_queue+0xd7/0x1d0 [ 3.689358] [] floppy_init+0xd94/0xdce [ 3.689358] [] ? set_cmos+0x6e/0x6e [ 3.689358] [] do_one_initcall+0x3d/0x170 [ 3.700004] [] kernel_init+0xc5/0x13f [ 3.700004] [] kernel_thread_helper+0x4/0x10 [ 3.700004] [] ? start_kernel+0x339/0x339 [ 3.700004] [] ? gs_change+0xb/0xb [ 3.700004] ---[ end trace 0b50c7fc90054b8a ]--- [ 3.700213] ------------[ cut here ]------------ [ 3.700214] WARNING: at /l/latest/linux/drivers/block/floppy.c:2929 do_fd_request+0xb7/0xc0() [ 3.700215] Hardware name: To Be Filled By O.E.M. [ 3.700216] VFS: do_fd_request called on non-open device [ 3.700217] Modules linked in: [ 3.700218] Pid: 1, comm: swapper/0 Tainted: G W 3.2.0-rc3-next-20111201_64+ #1616 [ 3.700219] Call Trace: [ 3.700221] [] warn_slowpath_common+0x7a/0xb0 [ 3.700223] [] warn_slowpath_fmt+0x41/0x50 [ 3.700224] [] do_fd_request+0xb7/0xc0 [ 3.700226] [] blk_drain_queue+0x53/0x70 [ 3.700228] [] blk_cleanup_queue+0xd7/0x1d0 [ 3.700230] [] floppy_init+0xd94/0xdce [ 3.700231] [] ? set_cmos+0x6e/0x6e [ 3.700233] [] do_one_initcall+0x3d/0x170 [ 3.700235] [] kernel_init+0xc5/0x13f [ 3.700236] [] kernel_thread_helper+0x4/0x10 [ 3.700238] [] ? start_kernel+0x339/0x339 [ 3.700240] [] ? gs_change+0xb/0xb [ 3.700241] ---[ end trace 0b50c7fc90054b8b ]--- [ 3.700247] ------------[ cut here ]------------ [ 3.700248] WARNING: at /l/latest/linux/drivers/block/floppy.c:2929 do_fd_request+0xb7/0xc0() [ 3.700250] Hardware name: To Be Filled By O.E.M. [ 3.700250] VFS: do_fd_request called on non-open device [ 3.700251] Modules linked in: [ 3.700252] Pid: 1, comm: swapper/0 Tainted: G W 3.2.0-rc3-next-20111201_64+ #1616 [ 3.700253] Call Trace: [ 3.700255] [] warn_slowpath_common+0x7a/0xb0 [ 3.700257] [] warn_slowpath_fmt+0x41/0x50 [ 3.700258] [] do_fd_request+0xb7/0xc0 [ 3.700260] [] blk_drain_queue+0x53/0x70 [ 3.700262] [] blk_cleanup_queue+0xd7/0x1d0 [ 3.700264] [] floppy_init+0xd94/0xdce [ 3.700265] [] ? set_cmos+0x6e/0x6e [ 3.700267] [] do_one_initcall+0x3d/0x170 [ 3.700269] [] kernel_init+0xc5/0x13f [ 3.700270] [] kernel_thread_helper+0x4/0x10 [ 3.700272] [] ? start_kernel+0x339/0x339 [ 3.700274] [] ? gs_change+0xb/0xb [ 3.700275] ---[ end trace 0b50c7fc90054b8c ]--- [ 3.700280] ------------[ cut here ]------------ [ 3.700282] WARNING: at /l/latest/linux/drivers/block/floppy.c:2929 do_fd_request+0xb7/0xc0() [ 3.700283] Hardware name: To Be Filled By O.E.M. [ 3.700284] VFS: do_fd_request called on non-open device [ 3.700285] Modules linked in: [ 3.700286] Pid: 1, comm: swapper/0 Tainted: G W 3.2.0-rc3-next-20111201_64+ #1616 [ 3.700287] Call Trace: [ 3.700288] [] warn_slowpath_common+0x7a/0xb0 [ 3.700290] [] warn_slowpath_fmt+0x41/0x50 [ 3.700292] [] do_fd_request+0xb7/0xc0 [ 3.700293] [] blk_drain_queue+0x53/0x70 [ 3.700296] [] blk_cleanup_queue+0xd7/0x1d0 [ 3.700297] [] floppy_init+0xd94/0xdce [ 3.700299] [] ? set_cmos+0x6e/0x6e [ 3.700300] [] do_one_initcall+0x3d/0x170 [ 3.700302] [] kernel_init+0xc5/0x13f [ 3.700304] [] kernel_thread_helper+0x4/0x10 [ 3.700305] [] ? start_kernel+0x339/0x339 [ 3.700307] [] ? gs_change+0xb/0xb [ 3.700308] ---[ end trace 0b50c7fc90054b8d ]--- [ 3.700314] ------------[ cut here ]------------ [ 3.700315] WARNING: at /l/latest/linux/drivers/block/floppy.c:2929 do_fd_request+0xb7/0xc0() [ 3.700316] Hardware name: To Be Filled By O.E.M. [ 3.700317] VFS: do_fd_request called on non-open device [ 3.700318] Modules linked in: [ 3.700319] Pid: 1, comm: swapper/0 Tainted: G W 3.2.0-rc3-next-20111201_64+ #1616 [ 3.700320] Call Trace: [ 3.700322] [] warn_slowpath_common+0x7a/0xb0 [ 3.700323] [] warn_slowpath_fmt+0x41/0x50 [ 3.700325] [] do_fd_request+0xb7/0xc0 [ 3.700327] [] blk_drain_queue+0x53/0x70 [ 3.700329] [] blk_cleanup_queue+0xd7/0x1d0 [ 3.700330] [] floppy_init+0xd94/0xdce [ 3.700332] [] ? set_cmos+0x6e/0x6e [ 3.700333] [] do_one_initcall+0x3d/0x170 [ 3.700335] [] kernel_init+0xc5/0x13f [ 3.700337] [] kernel_thread_helper+0x4/0x10 [ 3.700339] [] ? start_kernel+0x339/0x339 [ 3.700340] [] ? gs_change+0xb/0xb [ 3.700341] ---[ end trace 0b50c7fc90054b8e ]--- [ 3.700347] ------------[ cut here ]------------ [ 3.700348] WARNING: at /l/latest/linux/drivers/block/floppy.c:2929 do_fd_request+0xb7/0xc0() [ 3.700349] Hardware name: To Be Filled By O.E.M. [ 3.700350] VFS: do_fd_request called on non-open device [ 3.700351] Modules linked in: [ 3.700352] Pid: 1, comm: swapper/0 Tainted: G W 3.2.0-rc3-next-20111201_64+ #1616 [ 3.700353] Call Trace: [ 3.700355] [] warn_slowpath_common+0x7a/0xb0 [ 3.700356] [] warn_slowpath_fmt+0x41/0x50 [ 3.700358] [] do_fd_request+0xb7/0xc0 [ 3.700360] [] blk_drain_queue+0x53/0x70 [ 3.700362] [] blk_cleanup_queue+0xd7/0x1d0 [ 3.700363] [] floppy_init+0xd94/0xdce [ 3.700365] [] ? set_cmos+0x6e/0x6e [ 3.700367] [] do_one_initcall+0x3d/0x170 [ 3.700368] [] kernel_init+0xc5/0x13f [ 3.700370] [] kernel_thread_helper+0x4/0x10 [ 3.700372] [] ? start_kernel+0x339/0x339 [ 3.700373] [] ? gs_change+0xb/0xb [ 3.700374] ---[ end trace 0b50c7fc90054b8f ]--- [ 3.793905] ahci 0000:00:1f.2: version 3.0 [ 3.794806] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.795748] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 3.796750] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports ? Gbps 0x3f impl SATA mode [ 3.797666] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems [ 3.798579] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.836742] scsi0 : ahci [ 3.837723] scsi1 : ahci [ 3.838681] scsi2 : ahci [ 3.839622] scsi3 : ahci [ 3.840548] scsi4 : ahci [ 3.841453] scsi5 : ahci [ 3.842410] ata1: SATA max UDMA/133 abar m2048@0xfeb7c800 port 0xfeb7c900 irq 43 [ 3.843268] ata2: SATA max UDMA/133 abar m2048@0xfeb7c800 port 0xfeb7c980 irq 43 [ 3.844122] ata3: SATA max UDMA/133 abar m2048@0xfeb7c800 port 0xfeb7ca00 irq 43 [ 3.844969] ata4: SATA max UDMA/133 abar m2048@0xfeb7c800 port 0xfeb7ca80 irq 43 [ 3.845811] ata5: SATA max UDMA/133 abar m2048@0xfeb7c800 port 0xfeb7cb00 irq 43 [ 3.846648] ata6: SATA max UDMA/133 abar m2048@0xfeb7c800 port 0xfeb7cb80 irq 43 [ 3.847643] tun: Universal TUN/TAP device driver, 1.6 [ 3.848479] tun: (C) 1999-2004 Max Krasnyansky [ 3.849373] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.850232] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.851112] e1000 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.145453] e1000 0000:05:00.0: eth0: (PCI:33MHz:32-bit) 00:0e:0c:73:b3:da [ 4.146328] e1000 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.147216] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 4.148076] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 4.148947] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 9 [ 4.149816] e1000e 0000:00:19.0: setting latency timer to 64 [ 4.150765] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 4.168086] ata5: SATA link down (SStatus 0 SControl 300) [ 4.169016] ata4: SATA link down (SStatus 0 SControl 300) [ 4.169888] ata6: SATA link down (SStatus 0 SControl 300) [ 4.170737] ata3: SATA link down (SStatus 0 SControl 300) [ 4.340022] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.340936] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.349892] ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 [ 4.350868] ata1.00: 321672960 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.352685] ata1.00: configured for UDMA/133 [ 4.353721] scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 [ 4.354717] sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 4.355633] sd 0:0:0:0: [sda] Write Protect is off [ 4.356516] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.357400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.374059] sda: sda2 sda3 sda4 [ 4.375255] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.394072] ata2.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133 [ 4.395023] ata2.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.452372] ata2.00: configured for UDMA/133 [ 4.453298] scsi 1:0:0:0: Direct-Access ATA ST380811AS 3.AA PQ: 0 ANSI: 5 [ 4.454337] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 4.454341] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:13:20:f5:f2:1d [ 4.454343] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.454370] e1000e 0000:00:19.0: eth1: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF [ 4.454477] firewire_ohci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.458937] sd 1:0:0:0: [sdb] Write Protect is off [ 4.459867] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.460820] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.508087] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 4.509215] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.510212] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.511214] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.512212] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.513238] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.514259] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.519118] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 4.520126] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfeb7f400 [ 4.534277] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 4.535651] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.536633] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.537722] hub 1-0:1.0: USB hub found [ 4.538712] hub 1-0:1.0: 6 ports detected [ 4.539765] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.540804] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.541832] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.542904] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.543956] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.548873] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 4.549931] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb7f000 [ 4.564017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.565266] hub 2-0:1.0: USB hub found [ 4.566333] hub 2-0:1.0: 6 ports detected [ 4.567458] uhci_hcd: USB Universal Host Controller Interface driver [ 4.568541] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.569606] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.570667] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.571754] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.572845] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880 [ 4.574016] hub 3-0:1.0: USB hub found [ 4.575066] hub 3-0:1.0: 2 ports detected [ 4.576165] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.577225] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.578278] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.579367] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 4.580463] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800 [ 4.581646] hub 4-0:1.0: USB hub found [ 4.582722] hub 4-0:1.0: 2 ports detected [ 4.583847] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.584953] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 4.586054] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.587184] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 4.588303] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d480 [ 4.589505] hub 5-0:1.0: USB hub found [ 4.590582] hub 5-0:1.0: 2 ports detected [ 4.591696] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.592788] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.593868] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.594980] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.596067] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 4.597239] hub 6-0:1.0: USB hub found [ 4.598292] hub 6-0:1.0: 2 ports detected [ 4.599384] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.600451] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.601498] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.602567] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 4.603622] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080 [ 4.604776] hub 7-0:1.0: USB hub found [ 4.605810] hub 7-0:1.0: 2 ports detected [ 4.606878] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 4.607910] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.608949] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.610003] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 4.611035] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d000 [ 4.612144] hub 8-0:1.0: USB hub found [ 4.613132] hub 8-0:1.0: 2 ports detected [ 4.614200] usbcore: registered new interface driver uas [ 4.615190] Initializing USB Mass Storage driver... [ 4.616272] usbcore: registered new interface driver usb-storage [ 4.617275] USB Mass Storage support registered. [ 4.618356] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 4.622411] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.623417] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.624502] mousedev: PS/2 mouse device common for all mice [ 4.625606] rtc_cmos 00:03: RTC can wake from S4 [ 4.626708] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 4.627729] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.628763] i2c /dev entries driver [ 4.630252] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.631408] lirc_dev: IR Remote Control driver registered, major 251 [ 4.632522] coretemp coretemp.0: Using relative temperature scale! [ 4.633549] coretemp coretemp.0: Using relative temperature scale! [ 4.634564] md: raid0 personality registered for level 0 [ 4.635583] md: raid1 personality registered for level 1 [ 4.636707] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 4.637733] cpuidle: using governor ladder [ 4.638765] cpuidle: using governor menu [ 4.640535] usbcore: registered new interface driver usbhid [ 4.641553] usbhid: USB HID core driver [ 4.642783] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.643869] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 4.644933] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.960158] ALSA device list: [ 4.961211] #0: HDA Intel at 0xfeb78000 irq 45 [ 4.962368] TCP cubic registered [ 4.963384] IPv6: Loaded, but administratively disabled, reboot required to enable [ 4.964439] NET: Registered protocol family 17 [ 4.965499] Registering the dns_resolver key type [ 4.966654] PM: Checking hibernation image partition /dev/sdb5 [ 4.967699] PM: Hibernation image partition 259:589824 present [ 4.968746] PM: Looking for hibernation image. [ 4.980834] PM: Image not found (code -22) [ 4.981923] PM: Hibernation image not present or could not be loaded. [ 4.982970] registered taskstats version 1 [ 4.984489] console [netcon0] enabled [ 4.985531] netconsole: network logging started [ 4.986597] rtc_cmos 00:03: setting system clock to 2011-12-01 13:23:05 UTC (1322745785) [ 4.987709] md: Waiting for all devices to be available before autodetect [ 4.988790] md: If you don't use raid, use raid=noautodetect [ 4.989975] md: Autodetecting RAID arrays. [ 5.008109] firewire_core: created device fw0: GUID 0000000000000000, S400 [ 5.024699] md: Scanned 4 and added 4 devices. [ 5.025812] md: autorun ... [ 5.026880] md: considering sdb3 ... [ 5.027959] md: adding sdb3 ... [ 5.029030] md: sdb2 has different UUID to sdb3 [ 5.030088] md: adding sda3 ... [ 5.031138] md: sda2 has different UUID to sdb3 [ 5.032300] md: created md1 [ 5.033347] md: bind [ 5.034390] md: bind [ 5.035415] md: running: [ 5.036490] bio: create slab at 1 [ 5.037535] md/raid1:md1: active with 2 out of 2 mirrors [ 5.038567] md1: detected capacity change from 0 to 21474770944 [ 5.039617] md: considering sdb2 ... [ 5.040650] md: adding sdb2 ... [ 5.041667] md: adding sda2 ... [ 5.042671] md: created md0 [ 5.043672] md: bind [ 5.044674] md: bind [ 5.045655] md: running: [ 5.046665] md/raid0:md0: md_size is 75497216 sectors. [ 5.047639] md: RAID0 configuration for md0 - 1 zone [ 5.048607] md: zone0=[sda2/sdb2] [ 5.049570] zone-offset= 0KB, device-offset= 0KB, size= 37748608KB [ 5.050564] [ 5.051537] md0: detected capacity change from 0 to 38654574592 [ 5.052548] md: ... autorun DONE. [ 5.064150] md0: unknown partition table [ 5.065293] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240) [ 5.072021] usb 2-6: new high-speed USB device number 3 using ehci_hcd [ 5.101084] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 5.102098] VFS: Mounted root (ext4 filesystem) on device 9:0. [ 5.130828] devtmpfs: mounted [ 5.132500] Freeing unused kernel memory: 480k freed [ 5.133598] Write protecting the kernel read-only data: 10240k [ 5.138724] Freeing unused kernel memory: 1812k freed [ 5.140323] Freeing unused kernel memory: 72k freed [ 5.212163] input: Leadtek WinFast DTV Dongle Gold as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.1/input/input2 [ 5.213328] generic-usb 0003:0413:6029.0001: input: USB HID v1.01 Keyboard [Leadtek WinFast DTV Dongle Gold] on usb-0000:00:1d.7-6/input1 [ 5.452040] usb 4-2: new low-speed USB device number 2 using uhci_hcd [ 5.775774] input: Genius Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3 [ 5.776910] generic-usb 0003:0458:0708.0002: input: USB HID v1.11 Keyboard [Genius Multimedia Keyboard] on usb-0000:00:1a.1-2/input0 [ 5.853635] input: Genius Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input4 [ 5.854838] generic-usb 0003:0458:0708.0003: input: USB HID v1.11 Device [Genius Multimedia Keyboard] on usb-0000:00:1a.1-2/input1 [ 6.100064] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 6.354631] input: Microsoft Corporation Microsoft ® Laser Mouse 6000 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5 [ 6.355894] generic-usb 0003:045E:00F0.0004: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft ® Laser Mouse 6000] on usb-0000:00:1a.2-1/input0 [ 6.456054] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse) [ 6.515589] systemd[1]: Set hostname to . [ 6.596043] usb 7-1: new full-speed USB device number 2 using uhci_hcd [ 6.665033] systemd[1]: Failed to connect to audit log: Protocol not supported [ 8.338392] systemd[1]: [/etc/init.d/exim:9] Failed to add LSB Provides name sendmail.service, ignoring: File exists [ 8.392341] systemd[1]: [/etc/init.d/cups:19] Failed to add LSB Provides name cupsd.service, ignoring: File exists [ 8.982594] systemd-fsck[1014]: Root directory is writable, skipping check. [ 9.127124] udevd[1002]: starting version 173 [ 9.884158] EXT4-fs (md0): re-mounted. Opts: (null) [ 13.267492] usbcore: registered new interface driver usbserial [ 13.268326] usbserial: USB Serial Driver core [ 13.372326] udevd[1679]: renamed network interface eth0 to rename2 [ 13.384227] udevd[1668]: renamed network interface eth1 to eth0 [ 13.389669] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 13.390864] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 13.392105] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 13.395169] af9013: firmware version:4.95.0.0 [ 13.401050] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 13.402011] tda18271 15-00c0: creating new instance [ 13.405799] TDA18271HD/C2 detected @ 15-00c0 [ 13.428211] udevd[1679]: renamed network interface rename2 to eth1 [ 13.488774] USB Serial support registered for pl2303 [ 13.489684] pl2303 7-1:1.0: pl2303 converter detected [ 13.501857] usb 7-1: pl2303 converter now attached to ttyUSB0 [ 13.502753] usbcore: registered new interface driver pl2303 [ 13.503599] pl2303: Prolific PL2303 USB to serial adaptor driver [ 13.652574] ifup[1932]: Service network not started and mode 'auto' -> skipping [ 13.653660] ifup[1934]: Service network not started and mode 'auto' -> skipping [ 13.657551] IR keymap rc-leadtek-y04g0051 not found [ 13.658457] Registered IR keymap rc-empty [ 13.659949] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc0/input6 [ 13.662047] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc0 [ 13.663014] dvb-usb: schedule remote query interval to 500 msecs. [ 13.663971] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 13.673249] usbcore: registered new interface driver dvb_usb_af9015 [ 13.841373] md1: unknown partition table [ 17.913476] systemd-fsck[1998]: /dev/sda4: čistý, 38655/7569408 souborů, 27589645/30247392 bloků [ 18.108989] systemd-fsck[2003]: /dev/md1: čistý, 130376/1310720 souborů, 3627282/5242864 bloků [ 18.222388] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 22.604704] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null) [ 23.189767] systemd-fsck[2034]: /dev/sdb6: čistý, 18/2252800 souborů, 8181040/9005227 bloků [ 23.335893] EXT4-fs (sdb6): mounted filesystem with writeback data mode. Opts: data=writeback [ 23.425176] systemd-fsck[2039]: boot: čistý, 236/46184 souborů, 21482/184716 bloků [ 23.503794] kjournald starting. Commit interval 5 seconds [ 23.505213] EXT3-fs (sdb1): using internal journal [ 23.506556] EXT3-fs (sdb1): mounted filesystem with writeback data mode [ 25.846057] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 25.900063] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 27.192892] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 27.193797] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 30.852257] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 37.898031] EXT4-fs (md0): re-mounted. Opts: commit=0 [ 37.910365] EXT4-fs (sda4): re-mounted. Opts: commit=0 [ 38.098104] EXT4-fs (md1): re-mounted. Opts: commit=0 [ 38.099795] EXT4-fs (sdb6): re-mounted. Opts: data=writeback,commit=0 [ 660.552782] usbcore: deregistering interface driver dvb_usb_af9015 [ 660.552796] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. [ 660.588205] tda18271 15-00c0: destroying instance [ 660.588527] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 663.636614] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 663.637516] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 663.637903] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 663.640740] af9013: firmware version:4.95.0.0 [ 663.647243] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 663.647708] tda18271 15-00c0: creating new instance [ 663.650616] TDA18271HD/C2 detected @ 15-00c0 [ 663.895996] Registered IR keymap rc-leadtek-y04g0051 [ 663.896786] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc1/input7 [ 663.896861] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc1 [ 663.896863] dvb-usb: schedule remote query interval to 500 msecs. [ 663.896866] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 663.906616] usbcore: registered new interface driver dvb_usb_af9015 [ 989.569855] usbcore: deregistering interface driver dvb_usb_af9015 [ 989.569869] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. [ 989.604709] tda18271 15-00c0: destroying instance [ 989.606690] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 992.599889] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 992.600064] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 992.600421] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 992.603411] af9013: firmware version:4.95.0.0 [ 992.614761] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 992.615282] tda18271 15-00c0: creating new instance [ 992.618758] TDA18271HD/C2 detected @ 15-00c0 [ 992.864266] IR keymap rc-leadtek-y04g0051 not found [ 992.864269] Registered IR keymap rc-empty [ 992.864397] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc2/input8 [ 992.864449] rc2: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc2 [ 992.864451] dvb-usb: schedule remote query interval to 500 msecs. [ 992.864453] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 992.871935] usbcore: registered new interface driver dvb_usb_af9015 [ 1144.707388] usb 2-6: USB disconnect, device number 3 [ 1144.757653] tda18271 15-00c0: destroying instance [ 1144.758814] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 1144.759364] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. [ 1149.852030] usb 2-6: new high-speed USB device number 4 using ehci_hcd [ 1150.352855] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will try to load a firmware [ 1150.380969] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 1150.448110] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 1150.448692] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1150.449098] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 1150.450727] af9013: firmware version:4.95.0.0 [ 1150.455351] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1150.455524] tda18271 15-00c0: creating new instance [ 1150.461723] TDA18271HD/C2 detected @ 15-00c0 [ 1150.724362] IR keymap rc-leadtek-y04g0051 not found [ 1150.724367] Registered IR keymap rc-empty [ 1150.724601] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc3/input9 [ 1150.724685] rc3: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc3 [ 1150.724687] dvb-usb: schedule remote query interval to 500 msecs. [ 1150.724689] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 1150.735600] input: Leadtek WinFast DTV Dongle Gold as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.1/input/input10 [ 1150.735718] generic-usb 0003:0413:6029.0005: input: USB HID v1.01 Keyboard [Leadtek WinFast DTV Dongle Gold] on usb-0000:00:1d.7-6/input1 [ 1386.424360] usbcore: deregistering interface driver dvb_usb_af9015 [ 1386.456360] tda18271 15-00c0: destroying instance [ 1386.458787] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 1426.725244] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 1426.728319] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1426.728641] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 1426.730863] af9013: firmware version:4.95.0.0 [ 1426.738238] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1426.738308] tda18271 15-00c0: creating new instance [ 1426.744370] TDA18271HD/C2 detected @ 15-00c0 [ 1427.013246] Registered IR keymap rc-leadtek-y04g0051 [ 1427.014039] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc4/input11 [ 1427.014100] rc4: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc4 [ 1427.014102] dvb-usb: schedule remote query interval to 500 msecs. [ 1427.014105] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 1427.022037] usbcore: registered new interface driver dvb_usb_af9015 [ 1451.057069] usbcore: deregistering interface driver dvb_usb_af9015 [ 1451.112337] tda18271 15-00c0: destroying instance [ 1451.114729] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 1453.613771] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 1453.613903] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1453.614183] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 1453.617959] af9013: firmware version:4.95.0.0 [ 1453.626279] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1453.626771] tda18271 15-00c0: creating new instance [ 1453.633030] TDA18271HD/C2 detected @ 15-00c0 [ 1453.900912] IR keymap rc-leadtek-y04g0051 not found [ 1453.900916] Registered IR keymap rc-empty [ 1453.901236] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc5/input12 [ 1453.901306] rc5: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc5 [ 1453.901309] dvb-usb: schedule remote query interval to 500 msecs. [ 1453.901311] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 1453.910168] usbcore: registered new interface driver dvb_usb_af9015 [ 1592.916167] usbcore: deregistering interface driver dvb_usb_af9015 [ 1592.999797] tda18271 15-00c0: destroying instance [ 1593.026809] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 1595.132953] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 1595.160038] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1595.160378] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 1595.195121] af9013: firmware version:4.95.0.0 [ 1595.200711] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1595.212048] tda18271 15-00c0: creating new instance [ 1595.218080] TDA18271HD/C2 detected @ 15-00c0 [ 1595.489219] Registered IR keymap rc-leadtek-y04g0051 [ 1595.504563] ir-keytable[24236]: segfault at 0 ip 0000000000401de3 sp 00007fff0a6a2580 error 4 in ir-keytable[400000+8000] [ 1595.504996] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc6/input13 [ 1595.509819] rc6: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc6 [ 1595.509825] dvb-usb: schedule remote query interval to 500 msecs. [ 1595.509828] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 1595.532152] usbcore: registered new interface driver dvb_usb_af9015 [ 1703.909535] usbcore: deregistering interface driver dvb_usb_af9015 [ 1703.932591] tda18271 15-00c0: destroying instance [ 1703.934715] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 1706.121048] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 1706.121611] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1706.121953] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 1706.124412] af9013: firmware version:4.95.0.0 [ 1706.132295] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1706.132389] tda18271 15-00c0: creating new instance [ 1706.138043] TDA18271HD/C2 detected @ 15-00c0 [ 1706.404929] Registered IR keymap rc-leadtek-y04g0051 [ 1706.405434] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc7/input14 [ 1706.405485] rc7: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc7 [ 1706.405488] dvb-usb: schedule remote query interval to 200 msecs. [ 1706.405490] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 1706.413833] usbcore: registered new interface driver dvb_usb_af9015 [ 1761.325713] usbcore: deregistering interface driver dvb_usb_af9015 [ 1761.356373] tda18271 15-00c0: destroying instance [ 1761.357980] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 1762.665914] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 1762.666084] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1762.666440] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 1762.670912] af9013: firmware version:4.95.0.0 [ 1762.677914] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1762.678011] tda18271 15-00c0: creating new instance [ 1762.684158] TDA18271HD/C2 detected @ 15-00c0 [ 1762.948788] Registered IR keymap rc-leadtek-y04g0051 [ 1762.948934] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc8/input15 [ 1762.948986] rc8: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc8 [ 1762.948989] dvb-usb: schedule remote query interval to 300 msecs. [ 1762.948991] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 1762.957057] usbcore: registered new interface driver dvb_usb_af9015 [ 1919.632113] usbcore: deregistering interface driver dvb_usb_af9015 [ 1919.656369] tda18271 15-00c0: destroying instance [ 1919.656675] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 1921.180815] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 1921.180952] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1921.181347] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 1921.184190] af9013: firmware version:4.95.0.0 [ 1921.191690] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1921.192103] tda18271 15-00c0: creating new instance [ 1921.197942] TDA18271HD/C2 detected @ 15-00c0 [ 1921.473322] Registered IR keymap rc-leadtek-y04g0051 [ 1921.473467] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc9/input16 [ 1921.473843] rc9: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc9 [ 1921.473845] dvb-usb: schedule remote query interval to 400 msecs. [ 1921.473848] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 1921.482617] usbcore: registered new interface driver dvb_usb_af9015 [ 1997.769310] usbcore: deregistering interface driver dvb_usb_af9015 [ 1997.793126] tda18271 15-00c0: destroying instance [ 1997.794239] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 1998.701869] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 1998.702006] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1998.702401] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 1998.705617] af9013: firmware version:4.95.0.0 [ 1998.711873] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1998.711965] tda18271 15-00c0: creating new instance [ 1998.718247] TDA18271HD/C2 detected @ 15-00c0 [ 1998.980383] Registered IR keymap rc-leadtek-y04g0051 [ 1998.980558] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc10/input17 [ 1998.980631] rc10: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc10 [ 1998.980633] dvb-usb: schedule remote query interval to 500 msecs. [ 1998.980635] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 1998.989051] usbcore: registered new interface driver dvb_usb_af9015 [ 2202.759274] EXT4-fs (md0): re-mounted. Opts: commit=0 [ 2202.762949] EXT4-fs (sda4): re-mounted. Opts: commit=0 [ 2202.882198] EXT4-fs (md1): re-mounted. Opts: commit=0 [ 2202.883865] EXT4-fs (sdb6): re-mounted. Opts: data=writeback,commit=0 [ 2203.744109] PM: Syncing filesystems ... done. [ 2203.762026] PM: Preparing system for mem sleep [ 2204.420137] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 2204.436071] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 2204.452052] PM: Entering mem sleep [ 2204.452076] Suspending console(s) (use no_console_suspend to debug) [ 2204.453305] parport_pc 00:07: disabled [ 2204.453419] serial 00:06: disabled [ 2204.453427] serial 00:06: wake-up capability disabled by ACPI [ 2204.453654] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 2204.453672] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2204.453702] sd 1:0:0:0: [sdb] Stopping disk [ 2204.453862] ACPI handle has no context! [ 2204.453876] sd 0:0:0:0: [sda] Stopping disk [ 2204.453951] e1000 0000:05:00.0: PCI INT A disabled [ 2204.453963] e1000 0000:05:00.0: PME# enabled [ 2204.453975] pci 0000:00:1e.0: wake-up capability enabled by ACPI [ 2204.454228] ACPI handle has no context! [ 2204.468073] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 2204.468102] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 2204.472057] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 2204.484138] tda18271 15-00c0: destroying instance [ 2204.484374] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully deinitialized and disconnected. [ 2204.492070] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 2204.492089] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 2204.492094] uhci_hcd 0000:00:1d.2: PCI INT D disabled [ 2204.516033] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 2204.520013] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 2204.628055] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 2204.685488] e1000e 0000:00:19.0: PCI INT A disabled [ 2204.685494] e1000e 0000:00:19.0: PME# enabled [ 2204.685499] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 2204.820030] PM: suspend of devices complete after 367.708 msecs [ 2204.820352] ehci_hcd 0000:00:1d.7: PME# enabled [ 2204.820356] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI [ 2204.836069] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI [ 2204.836114] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI [ 2204.836157] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 2204.836196] ehci_hcd 0000:00:1a.7: PME# enabled [ 2204.836200] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI [ 2204.852061] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI [ 2204.852104] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI [ 2204.852145] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 2204.852278] PM: late suspend of devices complete after 32.245 msecs [ 2204.852552] ACPI: Preparing to enter system sleep state S3 [ 2204.852818] PM: Saving platform NVS memory [ 2204.853238] Disabling non-boot CPUs ... [ 2204.956016] CPU 1 is now offline [ 2204.956415] Extended CMOS year: 2000 [ 2204.956415] ACPI: Low-level resume complete [ 2204.956415] PM: Restoring platform NVS memory [ 2204.956415] Extended CMOS year: 2000 [ 2204.956415] Enabling non-boot CPUs ... [ 2204.956415] Booting Node 0 Processor 1 APIC 0x1 [ 2204.956415] smpboot cpu 1: start_ip = 97000 [ 2204.854426] Disabled fast string operations [ 2204.854426] Calibrating delay loop (skipped) already calibrated this CPU [ 2204.987670] NMI watchdog enabled, takes one hw-pmu counter. [ 2204.988036] CPU1 is up [ 2204.988979] ACPI: Waking up from system sleep state S3 [ 2204.989296] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc0000008, writing 0xd0000008) [ 2204.989300] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 2204.989319] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 2204.989356] pci 0000:00:03.1: restoring config space at offset 0xf (was 0x400, writing 0x40f) [ 2204.989363] pci 0000:00:03.1: restoring config space at offset 0xb (was 0x0, writing 0x29c58086) [ 2204.989374] pci 0000:00:03.1: restoring config space at offset 0x4 (was 0xfed11004, writing 0xfeb7f804) [ 2204.989399] pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30c) [ 2204.989410] pci 0000:00:03.2: restoring config space at offset 0x8 (was 0x1, writing 0xe081) [ 2204.989414] pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0xe401) [ 2204.989418] pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0xe481) [ 2204.989422] pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0xe801) [ 2204.989450] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 2204.989466] serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xfeb7e000) [ 2204.989498] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10e) [ 2204.989514] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xdc01) [ 2204.989521] e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xfeb7d000) [ 2204.989529] e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xfeb40000) [ 2204.989538] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 2204.989582] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2204.989609] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 2204.989637] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2204.989662] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI [ 2204.989690] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2204.989714] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI [ 2204.989747] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 2204.989766] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI [ 2204.989773] ehci_hcd 0000:00:1a.7: PME# disabled [ 2204.989805] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 2204.989814] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 2204.989843] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) [ 2204.989858] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x2000a0a0, writing 0xa0a0) [ 2204.989869] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 2204.989877] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 2204.989922] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x20300, writing 0x2030c) [ 2204.989935] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0xb011b001) [ 2204.989943] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) [ 2204.989954] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 2204.989963] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) [ 2204.990019] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2204.990044] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 2204.990072] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2204.990096] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI [ 2204.990124] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2204.990148] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI [ 2204.990181] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 2204.990199] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI [ 2204.990206] ehci_hcd 0000:00:1d.7: PME# disabled [ 2204.990217] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) [ 2204.990312] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 2204.990376] pci 0000:00:1f.6: restoring config space at offset 0xb (was 0x0, writing 0x29328086) [ 2204.990467] pci 0000:03:00.0: restoring config space at offset 0x7 (was 0x2a001f1, writing 0x22a001f1) [ 2204.990529] firewire_ohci 0000:04:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010c) [ 2204.990560] firewire_ohci 0000:04:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xfe6f8000) [ 2204.990570] firewire_ohci 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe6ff800) [ 2204.990579] firewire_ohci 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) [ 2204.990592] firewire_ohci 0000:04:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300016) [ 2204.990627] e1000 0000:05:00.0: restoring config space at offset 0xf (was 0xff0100, writing 0xff0103) [ 2204.990637] e1000 0000:05:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfe7a0000) [ 2204.990650] e1000 0000:05:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xbc01) [ 2204.990657] e1000 0000:05:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xfe7c0000) [ 2204.990664] e1000 0000:05:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe7e0000) [ 2204.990672] e1000 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) [ 2204.990680] e1000 0000:05:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300017) [ 2204.990805] PM: early resume of devices complete after 1.552 msecs [ 2204.990889] i915 0000:00:02.0: setting latency timer to 64 [ 2205.036132] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2205.036137] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2205.036145] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2205.036147] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2205.036189] usb usb3: root hub lost power or was reset [ 2205.036191] usb usb4: root hub lost power or was reset [ 2205.036214] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2205.036223] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2205.036260] usb usb5: root hub lost power or was reset [ 2205.036277] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2205.036282] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2205.052037] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2205.052046] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2205.052076] usb usb6: root hub lost power or was reset [ 2205.052100] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2205.052104] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2205.052112] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2205.052114] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2205.052154] usb usb7: root hub lost power or was reset [ 2205.052156] usb usb8: root hub lost power or was reset [ 2205.052178] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2205.052186] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2205.052188] pci 0000:00:1e.0: setting latency timer to 64 [ 2205.052237] pci 0000:03:00.0: setting latency timer to 64 [ 2205.052283] e1000 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2205.068034] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 2205.068042] e1000e 0000:00:19.0: PME# disabled [ 2205.068052] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2205.068067] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 2205.068120] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 2205.068178] ahci 0000:00:1f.2: setting latency timer to 64 [ 2205.068311] sd 1:0:0:0: [sdb] Starting disk [ 2205.068325] sd 0:0:0:0: [sda] Starting disk [ 2205.088141] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 2205.092040] pci 0000:00:1e.0: wake-up capability disabled by ACPI [ 2205.092048] e1000 0000:05:00.0: PME# disabled [ 2205.108182] firewire_core: skipped bus generations, destroying all nodes [ 2205.112038] No ACPI video bus found [ 2205.180499] serial 00:06: activated [ 2205.244597] parport_pc 00:07: activated [ 2205.396035] ata3: SATA link down (SStatus 0 SControl 300) [ 2205.404034] ata4: SATA link down (SStatus 0 SControl 300) [ 2205.412040] ata6: SATA link down (SStatus 0 SControl 300) [ 2205.420033] ata5: SATA link down (SStatus 0 SControl 300) [ 2205.520157] usb 4-2: reset low-speed USB device number 2 using uhci_hcd [ 2205.608035] firewire_core: rediscovered device fw0 [ 2206.084143] usb 5-1: reset low-speed USB device number 2 using uhci_hcd [ 2206.492153] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [ 2206.636218] pl2303 7-1:1.0: no reset_resume for driver pl2303? [ 2206.636296] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [ 2206.636304] pl2303 7-1:1.0: device disconnected [ 2206.804942] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 2206.804944] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 2208.064425] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2208.167486] ata2.00: configured for UDMA/133 [ 2210.768030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2210.774495] ata1.00: configured for UDMA/133 [ 2210.806786] Extended CMOS year: 2000 [ 2210.806870] PM: resume of devices complete after 5815.999 msecs [ 2211.171979] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 2211.172052] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 2211.172392] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 2211.173857] af9013: firmware version:4.95.0.0 [ 2211.179483] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 2211.179520] tda18271 15-00c0: creating new instance [ 2211.185482] TDA18271HD/C2 detected @ 15-00c0 [ 2211.448860] Registered IR keymap rc-leadtek-y04g0051 [ 2211.448915] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc11/input18 [ 2211.448942] rc11: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc11 [ 2211.448944] dvb-usb: schedule remote query interval to 500 msecs. [ 2211.448945] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 2211.456504] pl2303 7-1:1.0: pl2303 converter detected [ 2211.468335] usb 7-1: pl2303 converter now attached to ttyUSB0 [ 2211.468696] PM: Finishing wakeup. [ 2211.468698] Restarting tasks ... done. [ 2211.782472] EXT4-fs (md0): re-mounted. Opts: commit=0 [ 2211.785677] EXT4-fs (sda4): re-mounted. Opts: commit=0 [ 2211.899221] EXT4-fs (md1): re-mounted. Opts: commit=0 [ 2211.901220] EXT4-fs (sdb6): re-mounted. Opts: data=writeback,commit=0