Linux version 3.1.5-gentoo (root@mrsteven-mobil) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 PREEMPT Sun Dec 18 22:15:50 CET 2011 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff40000 (usable) BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data) BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS) Notice: NX (Execute Disable) protection missing in CPU! DMI 2.3 present. DMI: ASUSTeK Computer Inc. M6N /M6N, BIOS 0214 03/28/2005 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7ff40 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped : 0 - 01c00000 Base memory trampoline at [c009c000] 9c000 size 12288 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 ACPI: RSDP 000f5df0 00014 (v00 ACPIAM) ACPI: RSDT 7ff40000 0002C (v01 A M I OEMRSDT 03000528 MSFT 00000097) ACPI: FACP 7ff40200 00081 (v01 A M I OEMFACP 03000528 MSFT 00000097) ACPI: DSDT 7ff40400 06500 (v01 1ABSP 1ABSP001 00000001 MSFT 02000001) ACPI: FACS 7ff50000 00040 ACPI: OEMB 7ff50040 00053 (v01 A M I OEMBIOS 03000528 MSFT 00000097) 1159MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007ff40 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007ff40 On node 0 totalpages: 523983 free_area_init_node: node 0, pgdat c165a5e0, node_mem_map f67fd200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2319 pages used for memmap HighMem zone: 294451 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:80000000) pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519888 Kernel command line: root=/dev/sda5 ro clocksource=acpi_pm fbcon=scrollback:128K PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0007ff40) Memory: 2071592k/2096384k available (4862k kernel code, 24340k reserved, 1665k data, 316k init, 1187080k highmem) virtual kernel memory layout: fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1660000 - 0xc16af000 ( 316 kB) .data : 0xc14bfa01 - 0xc165ff80 (1665 kB) .text : 0xc1000000 - 0xc14bfa01 (4862 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:16 CPU 0 irqstacks, hard=f6006000 soft=f6008000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 1399.952 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2799.90 BogoMIPS (lpj=1399952) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 mce: CPU supports 5 MCE banks CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 ACPI: Core revision 20110623 ACPI: setting ELCR to 0200 (from 0c30) Performance Events: p6 PMU driver. ... version: 0 ... bit width: 32 ... generic registers: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 devtmpfs: initialized PM: Registering ACPI NVS region at 7ff50000 (720896 bytes) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 2 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000de000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored) pci 0000:00:00.0: [8086:3340] type 0 class 0x000600 pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref] pci 0000:00:01.0: [8086:3341] type 1 class 0x000604 pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0xe800-0xe81f] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0xe880-0xe89f] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0xec00-0xec1f] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xffaffc00-0xffafffff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601 pci 0000:00:1f.0: Enabled i801 SMBus device pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0x0540-0x055f] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401 pci 0000:00:1f.5: reg 10: [io 0xee00-0xeeff] pci 0000:00:1f.5: reg 14: [io 0xe000-0xe03f] pci 0000:00:1f.5: reg 18: [mem 0xffaff800-0xffaff9ff] pci 0000:00:1f.5: reg 1c: [mem 0xffaff400-0xffaff4ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703 pci 0000:00:1f.6: reg 10: [io 0xe400-0xe4ff] pci 0000:00:1f.6: reg 14: [io 0xe080-0xe0ff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:01:00.0: [1002:4e50] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] pci 0000:01:00.0: reg 14: [io 0xd800-0xd8ff] pci 0000:01:00.0: reg 18: [mem 0xff8f0000-0xff8fffff] pci 0000:01:00.0: reg 30: [mem 0xff8c0000-0xff8dffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0xff800000-0xff8fffff] pci 0000:00:01.0: bridge window [mem 0xce900000-0xde9fffff pref] pci 0000:02:00.0: [14e4:169c] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [mem 0xff9f0000-0xff9fffff] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: [1180:0476] type 2 class 0x000607 pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff] pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:01.1: [1180:0476] type 2 class 0x000607 pci 0000:02:01.1: reg 10: [mem 0x00000000-0x00000fff] pci 0000:02:01.1: supports D1 D2 pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.1: PME# disabled pci 0000:02:01.2: [1180:0552] type 0 class 0x000c00 pci 0000:02:01.2: reg 10: [mem 0xff9ef800-0xff9effff] pci 0000:02:01.2: PME# supported from D0 D3hot D3cold pci 0000:02:01.2: PME# disabled pci 0000:02:02.0: [8086:1043] type 0 class 0x000280 pci 0000:02:02.0: reg 10: [mem 0xff9ee000-0xff9eefff] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xff900000-0xff9fffff] pci 0000:00:1e.0: bridge window [mem 0xdea00000-0xdeafffff pref] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02-02] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10) ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007ff40000 - 000000007fffffff Switching to clocksource pit pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000de000-0x000dffff window] pnp 00:00: [mem 0x80000000-0xffffffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0060] pnp 00:03: [io 0x0064] pnp 00:03: [irq 1] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:04: [irq 12] pnp 00:04: Plug and Play ACPI device, IDs PNP0f12 PNP0f13 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0-0x00ff] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [irq 3] pnp 00:07: [dma 1] pnp 00:07: [io 0x02f8-0x02ff] pnp 00:07: Plug and Play ACPI device, IDs NSC6001 (active) pnp 00:08: [irq 7] pnp 00:08: [dma 3] pnp 00:08: [io 0x0378-0x037f] pnp 00:08: [io 0x0778-0x077f] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:09: [io 0x0000-0xffffffff disabled] pnp 00:09: [io 0x0480-0x048f] pnp 00:09: [io 0x05c0-0x05cf] system 00:09: [io 0x0480-0x048f] has been reserved system 00:09: [io 0x05c0-0x05cf] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [io 0x0010-0x001f] pnp 00:0a: [io 0x0022-0x003f] pnp 00:0a: [io 0x0044-0x005f] pnp 00:0a: [io 0x0063] pnp 00:0a: [io 0x0065] pnp 00:0a: [io 0x0067-0x006f] pnp 00:0a: [io 0x0072-0x007f] pnp 00:0a: [io 0x0080] pnp 00:0a: [io 0x0084-0x0086] pnp 00:0a: [io 0x0088] pnp 00:0a: [io 0x008c-0x008e] pnp 00:0a: [io 0x0090-0x009f] pnp 00:0a: [io 0x00a2-0x00bf] pnp 00:0a: [io 0x00e0-0x00ef] pnp 00:0a: [io 0x04d0-0x04d1] system 00:0a: [io 0x04d0-0x04d1] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0xffb00000-0xffbfffff] pnp 00:0b: [mem 0xfff00000-0xffffffff] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:0c: [mem 0xffc00000-0xffefffff] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [io 0x0540-0x055f] pnp 00:0d: [io 0x0400-0x047f] pnp 00:0d: [io 0x0000-0xffffffff disabled] pnp 00:0d: [io 0x0480-0x048f] pnp 00:0d: [io 0x0500-0x053f] pnp 00:0d: [io 0x04c0-0x04cf] pnp 00:0d: [mem 0xfec00000-0xfec00fff] pnp 00:0d: [mem 0xfee00000-0xfee00fff] system 00:0d: [io 0x0540-0x055f] has been reserved system 00:0d: [io 0x0400-0x047f] has been reserved system 00:0d: [io 0x0480-0x048f] has been reserved system 00:0d: [io 0x0500-0x053f] has been reserved system 00:0d: [io 0x04c0-0x04cf] has been reserved system 00:0d: [mem 0xfec00000-0xfec00fff] has been reserved system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0e: [mem 0x00000000-0x0009ffff] pnp 00:0e: [mem 0x000c0000-0x000dffff] pnp 00:0e: [mem 0x000e0000-0x000fffff] pnp 00:0e: [mem 0x00100000-0x7fffffff] pnp 00:0e: [mem 0x00000000-0xffffffff disabled] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff]) pci 0000:00:1e.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] Switched to NOHz mode on CPU #0 pci 0000:00:01.0: bridge window [mem 0xff800000-0xff8fffff] pci 0000:00:01.0: bridge window [mem 0xce900000-0xde9fffff pref] pci 0000:02:01.0: BAR 0: assigned [mem 0x84000000-0x84000fff] pci 0000:02:01.0: BAR 0: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]) pci 0000:02:01.1: BAR 0: assigned [mem 0x88000000-0x88000fff] pci 0000:02:01.1: BAR 0: set to [mem 0x88000000-0x88000fff] (PCI address [0x88000000-0x88000fff]) pci 0000:02:01.1: BAR 10: assigned [mem 0x8c000000-0x8fffffff] pci 0000:02:01.1: BAR 9: assigned [mem 0x90000000-0x93ffffff pref] pci 0000:02:01.1: BAR 8: assigned [io 0x1000-0x10ff] pci 0000:02:01.1: BAR 7: assigned [io 0x1400-0x14ff] pci 0000:02:01.0: BAR 10: assigned [mem 0x94000000-0x97ffffff] pci 0000:02:01.0: BAR 9: assigned [mem 0x98000000-0x9bffffff pref] pci 0000:02:01.0: BAR 8: assigned [io 0x1800-0x18ff] pci 0000:02:01.0: BAR 7: assigned [io 0x1c00-0x1cff] pci 0000:02:01.0: CardBus bridge to [bus 03-06] pci 0000:02:01.0: bridge window [io 0x1c00-0x1cff] pci 0000:02:01.0: bridge window [io 0x1800-0x18ff] pci 0000:02:01.0: bridge window [mem 0x98000000-0x9bffffff pref] pci 0000:02:01.0: bridge window [mem 0x94000000-0x97ffffff] pci 0000:02:01.1: CardBus bridge to [bus 07-0a] pci 0000:02:01.1: bridge window [io 0x1400-0x14ff] pci 0000:02:01.1: bridge window [io 0x1000-0x10ff] pci 0000:02:01.1: bridge window [mem 0x90000000-0x93ffffff pref] pci 0000:02:01.1: bridge window [mem 0x8c000000-0x8fffffff] pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1e.0: bridge window [mem 0xff900000-0xff9fffff] pci 0000:00:1e.0: bridge window [mem 0xdea00000-0xdeafffff pref] pci 0000:00:1e.0: enabling device (0106 -> 0107) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:01.0: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered pci 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4 pci 0000:02:01.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:01.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:02:01.1: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xff800000-0xff8fffff] pci_bus 0000:01: resource 2 [mem 0xce900000-0xde9fffff pref] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xff900000-0xff9fffff] pci_bus 0000:02: resource 2 [mem 0xdea00000-0xdeafffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:03: resource 0 [io 0x1c00-0x1cff] pci_bus 0000:03: resource 1 [io 0x1800-0x18ff] pci_bus 0000:03: resource 2 [mem 0x98000000-0x9bffffff pref] pci_bus 0000:03: resource 3 [mem 0x94000000-0x97ffffff] pci_bus 0000:07: resource 0 [io 0x1400-0x14ff] pci_bus 0000:07: resource 1 [io 0x1000-0x10ff] pci_bus 0000:07: resource 2 [mem 0x90000000-0x93ffffff pref] pci_bus 0000:07: resource 3 [mem 0x8c000000-0x8fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 microcode: CPU0 sig=0x695, pf=0x20, revision=0x5 microcode: Microcode Update Driver: v2.00 , Peter Oruba audit: initializing netlink socket (disabled) type=2000 audit(1324476120.096:1): initialized highmem bounce pool size: 64 pages fuse init (API version 7.17) msgmni has been set to 1727 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855PM Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ACPI: Invalid PBLK length [7] Marking TSC unstable due to TSC halts in idle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (36 C) [drm] Initialized drm 1.1.0 20060810 ACPI: Battery Slot [BAT0] (battery absent) ACPI: Battery Slot [BAT1] (battery absent) [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1043:0x1772). [drm] register mmio base: 0xFF8F0000 [drm] register mmio size: 65536 agpgart-intel 0000:00:00.0: AGP 2.0 bridge agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode radeon 0000:01:00.0: putting AGP V2 device into 4x mode radeon 0000:01:00.0: GTT: 256M 0xE0000000 - 0xEFFFFFFF [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (64M used) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 442256 kiB. [TTM] Zone highmem: Available graphics memory: 1035796 kiB. [TTM] Initializing pool allocator. [drm] radeon: 64M of VRAM memory ready [drm] radeon: 256M of GTT memory ready. [drm] radeon: 1 quad pipes, 1 Z pipes initialized. radeon 0000:01:00.0: WB disabled [drm] Loading R300 Microcode [drm] radeon: ring at 0x00000000E0001000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Panel ID String: Samsung LTN154X1 WXGA [drm] Panel Size 1280x800 [drm] radeon legacy LVDS backlight initialized [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] LVDS [drm] Encoders: [drm] LCD1: INTERNAL_LVDS [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [drm] fb mappable at 0xD0040000 [drm] vram apper at 0xD0000000 [drm] size 4096000 [drm] fb depth is 24 [drm] pitch is 5120 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x50 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0 parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 tg3.c:v3.119 (May 18, 2011) tg3 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4 tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:0e:a6:3f:aa:4e tg3 0000:02:00.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0]) tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:02:00.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky firewire_ohci 0000:02:01.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 firewire_ohci: Added fw-ohci device 0000:02:01.2, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1 yenta_cardbus 0000:02:01.0: CardBus bridge found [1043:1864] ata2.01: ATAPI: TSSTcorp CDDVDW SN-S082H, SB01, max UDMA/33 ata2.01: configured for UDMA/33 ata1.00: ATA-7: WDC WD1600BEVE-00UYT0, 01.04A01, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SN-S082H SB01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:1:0: Attached scsi CD-ROM sr0 sr 1:0:1:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0028, PCI irq 4 yenta_cardbus 0000:02:01.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io 0x1000-0x1fff] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xff900000-0xff9fffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xff900000-0xff9fffff: excluding 0xff9e0000-0xff9fffff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xdea00000-0xdeafffff pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdea00000-0xdeafffff: excluding 0xdea00000-0xdeafffff yenta_cardbus 0000:02:01.1: CardBus bridge found [1043:1864] firewire_core: created device fw0: GUID 00e018000315820b, S400 yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0028, PCI irq 11 yenta_cardbus 0000:02:01.1: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [io 0x1000-0x1fff] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [mem 0xff900000-0xff9fffff] pcmcia_socket pcmcia_socket1: cs: memory probe 0xff900000-0xff9fffff: excluding 0xff9e0000-0xff9fffff yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [mem 0xdea00000-0xdeafffff pref] pcmcia_socket pcmcia_socket1: cs: memory probe 0xdea00000-0xdeafffff: excluding 0xdea00000-0xdeafffff ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.1.5-gentoo ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.1.5-gentoo uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.1.5-gentoo uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000ec00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.1.5-gentoo uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 asus_laptop: Asus Laptop Support version 0.42 asus_laptop: Error calling CWAP(1) asus_laptop: M6N model detected asus_laptop: Error setting bluetooth status to 1 input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5 Registered led device: asus::mail ALSA device list: No soundcards found. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' rtc_cmos 00:02: setting system clock to 2011-12-21 14:02:02 UTC (1324476122) Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 EXT3-fs (sda5): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds VFS: Mounted root (ext3 filesystem) readonly on device 8:5. devtmpfs: mounted Freeing unused kernel memory: 316k freed udev[859]: starting version 164 usb 2-1: new low speed USB device number 2 using uhci_hcd snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4 snd_intel8x0 0000:00:1f.5: setting latency timer to 64 usb 2-1: New USB device found, idVendor=046d, idProduct=c016 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Optical USB Mouse usb 2-1: Manufacturer: Logitech input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7 generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0 cfg80211: Calling CRDA to update world regulatory domain libipw: 802.11 data/management/control stack, git-1.1.13 libipw: Copyright (C) 2004-2005 Intel Corporation ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ipw2100 0000:02:02.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4 ipw2100: Detected Intel PRO/Wireless 2100 Network Connection intel8x0_measure_ac97_clock: measured 50931 usecs (2455 samples) intel8x0: clocking to 48000 cfg80211: failed to add phy80211 symlink to netdev! udev[868]: renamed network interface eth1 to ath0 cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) EXT3-fs (sda5): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): using internal journal EXT3-fs (sda6): mounted filesystem with journal data mode Adding 2000056k swap on /dev/sda8. Priority:-1 extents:1 across:2000056k ADDRCONF(NETDEV_UP): ath0: link is not ready ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready lib80211_crypt: registered algorithm 'CCMP' ath0: no IPv6 routers present