[ 226.133] X.Org X Server 1.11.4 Release Date: 2012-01-27 [ 226.134] X Protocol Version 11, Revision 0 [ 226.135] Build Operating System: Linux 2.6.39.3 x86_64 Gentoo [ 226.135] Current Operating System: Linux localhost 3.2.0+ #3 SMP Tue Feb 14 21:08:06 Local time zone must be set--see zic x86_64 [ 226.136] Kernel command line: root=/dev/sdc6 idle=mwait pcie_aspm=force i915.powersave=1 i915.i915_enable_rc6=1 rootdelay=8 [ 226.137] Build Date: 14 February 2012 04:12:26PM [ 226.137] [ 226.138] Current version of pixman: 0.25.1 [ 226.139] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 226.140] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 226.142] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 16 10:49:00 2012 [ 226.164] (==) Using config file: "/etc/X11/xorg.conf" [ 226.164] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 226.185] (==) ServerLayout "Layout0" [ 226.185] (**) |-->Screen "Screen0" (0) [ 226.185] (**) | |-->Monitor "" [ 226.185] (**) | |-->Device "Device0" [ 226.185] (==) No monitor specified for screen "Screen0". Using a default monitor configuration. [ 226.185] (**) Option "NoTrapSignals" [ 226.185] (**) Option "Xinerama" "0" [ 226.185] (==) Automatically adding devices [ 226.185] (==) Automatically enabling devices [ 226.218] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 226.218] Entry deleted from font path. [ 226.218] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 226.218] Entry deleted from font path. [ 226.218] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 226.218] Entry deleted from font path. [ 226.221] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 226.221] Entry deleted from font path. [ 226.221] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 226.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 226.222] Entry deleted from font path. [ 226.222] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 226.222] (==) FontPath set to: /usr/share/fonts/misc/ [ 226.222] (**) ModulePath set to "/usr/lib64/xorg/modules,/usr/lib64/opengl/xorg-x11/extensions" [ 226.222] (**) Extension "Composite" is disabled [ 226.222] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 226.222] (II) Loader magic: 0x7b8aa0 [ 226.222] (II) Module ABI versions: [ 226.222] X.Org ANSI C Emulation: 0.4 [ 226.222] X.Org Video Driver: 11.0 [ 226.222] X.Org XInput driver : 13.0 [ 226.222] X.Org Server Extension : 6.0 [ 226.222] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64 [ 226.222] (II) "extmod" will be loaded by default. [ 226.222] (II) "dbe" will be loaded by default. [ 226.222] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 226.222] (II) "record" will be loaded by default. [ 226.222] (II) "dri" will be loaded by default. [ 226.222] (II) "dri2" will be loaded by default. [ 226.222] (II) LoadModule: "glx" [ 226.252] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 226.269] (II) Module glx: vendor="X.Org Foundation" [ 226.269] compiled for 1.11.4, module version = 1.0.0 [ 226.269] ABI class: X.Org Server Extension, version 6.0 [ 226.269] (==) AIGLX enabled [ 226.269] (II) Loading extension GLX [ 226.271] (II) LoadModule: "extmod" [ 226.271] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 226.288] (II) Module extmod: vendor="X.Org Foundation" [ 226.288] compiled for 1.11.4, module version = 1.0.0 [ 226.288] Module class: X.Org Server Extension [ 226.288] ABI class: X.Org Server Extension, version 6.0 [ 226.289] (II) Loading extension MIT-SCREEN-SAVER [ 226.289] (II) Loading extension XFree86-VidModeExtension [ 226.289] (II) Loading extension XFree86-DGA [ 226.289] (II) Loading extension DPMS [ 226.289] (II) Loading extension XVideo [ 226.289] (II) Loading extension XVideo-MotionCompensation [ 226.289] (II) Loading extension X-Resource [ 226.289] (II) LoadModule: "dbe" [ 226.289] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 226.290] (II) Module dbe: vendor="X.Org Foundation" [ 226.291] compiled for 1.11.4, module version = 1.0.0 [ 226.291] Module class: X.Org Server Extension [ 226.291] ABI class: X.Org Server Extension, version 6.0 [ 226.291] (II) Loading extension DOUBLE-BUFFER [ 226.291] (II) LoadModule: "record" [ 226.291] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 226.292] (II) Module record: vendor="X.Org Foundation" [ 226.293] compiled for 1.11.4, module version = 1.13.0 [ 226.293] Module class: X.Org Server Extension [ 226.293] ABI class: X.Org Server Extension, version 6.0 [ 226.293] (II) Loading extension RECORD [ 226.293] (II) LoadModule: "dri" [ 226.293] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 226.308] (II) Module dri: vendor="X.Org Foundation" [ 226.308] compiled for 1.11.4, module version = 1.0.0 [ 226.308] ABI class: X.Org Server Extension, version 6.0 [ 226.308] (II) Loading extension XFree86-DRI [ 226.308] (II) LoadModule: "dri2" [ 226.308] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 226.322] (II) Module dri2: vendor="X.Org Foundation" [ 226.322] compiled for 1.11.4, module version = 1.2.0 [ 226.322] ABI class: X.Org Server Extension, version 6.0 [ 226.322] (II) Loading extension DRI2 [ 226.322] (II) LoadModule: "intel" [ 226.322] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 226.360] (II) Module intel: vendor="X.Org Foundation" [ 226.360] compiled for 1.11.4, module version = 2.17.0 [ 226.360] Module class: X.Org Video Driver [ 226.360] ABI class: X.Org Video Driver, version 11.0 [ 226.360] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 226.361] (--) using VT number 7 [ 226.370] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 226.381] (II) intel(0): SNA compiled from 2.17.0-653-g8050ced [ 226.381] drmOpenDevice: node name is /dev/dri/card0 [ 226.381] drmOpenDevice: open result is 8, (OK) [ 226.381] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 226.381] drmOpenDevice: node name is /dev/dri/card0 [ 226.381] drmOpenDevice: open result is 8, (OK) [ 226.381] drmOpenByBusid: drmOpenMinor returns 8 [ 226.381] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 226.381] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 226.381] (==) intel(0): RGB weight 888 [ 226.381] (==) intel(0): Default visual is TrueColor [ 226.381] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+) [ 226.381] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)" [ 226.383] (--) intel(0): Disabling use of vmap [ 226.383] (**) intel(0): Framebuffer tiled [ 226.383] (**) intel(0): Pixmaps tiled [ 226.383] (**) intel(0): 3D buffers tiled [ 226.383] (**) intel(0): Throttling enabled [ 226.383] (**) intel(0): Delayed flush enabled [ 226.383] (II) intel(0): Output LVDS1 using monitor section internal screen [ 226.383] (**) intel(0): Option "PreferredMode" "1600x900" [ 226.383] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 226.383] (II) intel(0): Output VGA1 has no monitor section [ 226.703] (II) intel(0): Output HDMI1 has no monitor section [ 226.727] (II) intel(0): Output DP1 has no monitor section [ 226.976] (II) intel(0): Output HDMI2 using monitor section external screen [ 226.976] (**) intel(0): Option "PreferredMode" "1920x1080" [ 226.999] (II) intel(0): Output HDMI3 has no monitor section [ 227.024] (II) intel(0): Output DP2 has no monitor section [ 227.048] (II) intel(0): Output DP3 has no monitor section [ 227.048] (II) intel(0): EDID for output LVDS1 [ 227.048] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0 [ 227.048] (II) intel(0): Year: 2010 Week: 33 [ 227.048] (II) intel(0): EDID Version: 1.4 [ 227.048] (II) intel(0): Digital Display Input [ 227.048] (II) intel(0): 6 bits per channel [ 227.048] (II) intel(0): Digital interface is undefined [ 227.048] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 227.048] (II) intel(0): Gamma: 2.20 [ 227.048] (II) intel(0): No DPMS capabilities specified [ 227.048] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 227.048] (II) intel(0): First detailed timing is preferred mode [ 227.048] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 227.048] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560 [ 227.048] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329 [ 227.048] (II) intel(0): Manufacturer's mask: 0 [ 227.048] (II) intel(0): Supported detailed timing: [ 227.048] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm [ 227.048] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0 [ 227.048] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 227.048] (II) intel(0): Supported detailed timing: [ 227.048] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm [ 227.048] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0 [ 227.048] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 227.048] (II) intel(0): AUO [ 227.048] (II) intel(0): B140RW02 V1 [ 227.048] (II) intel(0): EDID (in hex): [ 227.048] (II) intel(0): 00ffffffffffff0006af3e2100000000 [ 227.048] (II) intel(0): 21140104901f11780261959c59528f26 [ 227.048] (II) intel(0): 21505400000001010101010101010101 [ 227.048] (II) intel(0): 010101010101f82a409a61840c30402a [ 227.048] (II) intel(0): 330035ae10000018a51c409a61840c30 [ 227.048] (II) intel(0): 402a330035ae10000018000000fe0041 [ 227.048] (II) intel(0): 554f0a202020202020202020000000fe [ 227.048] (II) intel(0): 004231343052573032205631200a00d0 [ 227.048] (II) intel(0): EDID vendor "AUO", prod id 8510 [ 227.048] (II) intel(0): Printing DDC gathered Modelines: [ 227.048] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz) [ 227.048] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz) [ 227.049] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 227.049] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 227.049] (II) intel(0): Printing probed modes for output LVDS1 [ 227.049] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz) [ 227.049] (II) intel(0): Modeline "1600x900"x43.9 100.00 1600 1700 1800 1900 900 1000 1100 1200 +hsync -vsync (52.6 kHz) [ 227.049] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz) [ 227.049] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 227.049] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 227.049] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 227.049] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 227.049] (II) intel(0): EDID for output VGA1 [ 227.369] (II) intel(0): EDID for output HDMI1 [ 227.393] (II) intel(0): EDID for output DP1 [ 227.643] (II) intel(0): EDID for output HDMI2 [ 227.644] (II) intel(0): Manufacturer: ACR Model: db Serial#: 290568895 [ 227.644] (II) intel(0): Year: 2011 Week: 15 [ 227.644] (II) intel(0): EDID Version: 1.3 [ 227.644] (II) intel(0): Digital Display Input [ 227.644] (II) intel(0): Max Image Size [cm]: horiz.: 60 vert.: 34 [ 227.644] (II) intel(0): Gamma: 2.20 [ 227.644] (II) intel(0): DPMS capabilities: StandBy Suspend Off [ 227.644] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 227.644] (II) intel(0): First detailed timing is preferred mode [ 227.644] (II) intel(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 227.644] (II) intel(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 227.644] (II) intel(0): Supported established timings: [ 227.644] (II) intel(0): 720x400@70Hz [ 227.644] (II) intel(0): 640x480@60Hz [ 227.644] (II) intel(0): 640x480@67Hz [ 227.644] (II) intel(0): 800x600@56Hz [ 227.644] (II) intel(0): 800x600@60Hz [ 227.644] (II) intel(0): 1024x768@60Hz [ 227.644] (II) intel(0): 1024x768@70Hz [ 227.644] (II) intel(0): Manufacturer's mask: 10 [ 227.644] (II) intel(0): Supported standard timings: [ 227.644] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 227.644] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 227.644] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 227.644] (II) intel(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 227.644] (II) intel(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 227.644] (II) intel(0): Supported detailed timing: [ 227.644] (II) intel(0): clock: 148.5 MHz Image Size: 597 x 336 mm [ 227.644] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 227.644] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 227.644] (II) intel(0): Monitor name: S273HL [ 227.644] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 185 MHz [ 227.644] (II) intel(0): Serial No: LQA0C0054000 [ 227.644] (II) intel(0): Supported detailed timing: [ 227.644] (II) intel(0): clock: 27.0 MHz Image Size: 597 x 336 mm [ 227.644] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0 [ 227.644] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0 [ 227.644] (II) intel(0): Supported detailed timing: [ 227.644] (II) intel(0): clock: 74.2 MHz Image Size: 597 x 336 mm [ 227.644] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 227.644] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 227.644] (II) intel(0): Supported detailed timing: [ 227.644] (II) intel(0): clock: 74.2 MHz Image Size: 597 x 336 mm [ 227.644] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 227.644] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 [ 227.644] (II) intel(0): Supported detailed timing: [ 227.644] (II) intel(0): clock: 74.2 MHz Image Size: 597 x 336 mm [ 227.644] (II) intel(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0 [ 227.644] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 227.644] (II) intel(0): Supported detailed timing: [ 227.644] (II) intel(0): clock: 74.2 MHz Image Size: 597 x 336 mm [ 227.644] (II) intel(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0 [ 227.644] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 [ 227.644] (II) intel(0): Number of EDID sections to follow: 1 [ 227.644] (II) intel(0): EDID (in hex): [ 227.644] (II) intel(0): 00ffffffffffff000472db00bfba5111 [ 227.645] (II) intel(0): 0f150103803c2278ea6085a6564a9c25 [ 227.645] (II) intel(0): 125054b30c10714f81009500d1c08180 [ 227.645] (II) intel(0): 010101010101023a801871382d40582c [ 227.645] (II) intel(0): 450055502100001a000000fc00533237 [ 227.645] (II) intel(0): 33484c0a202020202020000000fd0037 [ 227.645] (II) intel(0): 4b1e5012000a202020202020000000ff [ 227.645] (II) intel(0): 004c51413043303035343030300a013a [ 227.645] (II) intel(0): 020322f223097f074e01020384050607 [ 227.645] (II) intel(0): 10111215931f148301000066030c0010 [ 227.645] (II) intel(0): 00008c0ad08a20e02d10103e96005550 [ 227.645] (II) intel(0): 21000018011d007251d01e206e285500 [ 227.645] (II) intel(0): 55502100001e011d8018711c1620582c [ 227.645] (II) intel(0): 250055502100009e011d00bc52d01e20 [ 227.645] (II) intel(0): b828554055502100001e011d80d0721c [ 227.645] (II) intel(0): 1620102c258055502100009e000000f7 [ 227.645] (II) intel(0): Printing probed modes for output HDMI2 [ 227.645] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz) [ 227.645] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz) [ 227.645] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 227.645] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz) [ 227.645] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 227.645] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) [ 227.645] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz) [ 227.645] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 227.645] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz) [ 227.645] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz) [ 227.645] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 227.645] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 227.645] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 227.645] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 227.645] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz) [ 227.645] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz) [ 227.645] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 227.645] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 227.645] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 227.645] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 227.669] (II) intel(0): EDID for output HDMI3 [ 227.693] (II) intel(0): EDID for output DP2 [ 227.717] (II) intel(0): EDID for output DP3 [ 227.717] (II) intel(0): Output LVDS1 connected [ 227.717] (II) intel(0): Output VGA1 disconnected [ 227.717] (II) intel(0): Output HDMI1 disconnected [ 227.717] (II) intel(0): Output DP1 disconnected [ 227.717] (II) intel(0): Output HDMI2 connected [ 227.717] (II) intel(0): Output HDMI3 disconnected [ 227.717] (II) intel(0): Output DP2 disconnected [ 227.717] (II) intel(0): Output DP3 disconnected [ 227.717] (II) intel(0): Using user preference for initial modes [ 227.717] (II) intel(0): Output LVDS1 using initial mode 1600x900 [ 227.717] (II) intel(0): Output HDMI2 using initial mode 1920x1080 [ 227.717] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 227.717] (**) intel(0): Display dimensions: (310, 170) mm [ 227.717] (**) intel(0): DPI set to (157, 161) [ 227.717] (II) Loading sub module "fb" [ 227.717] (II) LoadModule: "fb" [ 227.717] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 227.748] (II) Module fb: vendor="X.Org Foundation" [ 227.748] compiled for 1.11.4, module version = 1.0.0 [ 227.748] ABI class: X.Org ANSI C Emulation, version 0.4 [ 227.748] (II) Loading sub module "dri2" [ 227.748] (II) LoadModule: "dri2" [ 227.748] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 227.748] (II) Module dri2: vendor="X.Org Foundation" [ 227.748] compiled for 1.11.4, module version = 1.2.0 [ 227.748] ABI class: X.Org Server Extension, version 6.0 [ 227.748] (==) Depth 24 pixmap format is 32 bpp [ 227.755] (II) intel(0): SNA initialized with SandyBridge backend [ 227.755] (==) intel(0): Backing store disabled [ 227.755] (==) intel(0): Silken mouse enabled [ 227.759] (II) intel(0): Initializing HW Cursor [ 227.759] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 227.760] (==) intel(0): DPMS enabled [ 227.768] (II) intel(0): Overlay video not supported on this hardware [ 227.768] (II) intel(0): [DRI2] Setup complete [ 227.768] (II) intel(0): [DRI2] DRI driver: i965 [ 227.768] (II) intel(0): direct rendering: DRI2 Enabled [ 227.768] (==) intel(0): hotplug detection: "enabled" [ 227.768] (--) RandR disabled [ 227.768] (II) Initializing built-in extension Generic Event Extension [ 227.768] (II) Initializing built-in extension SHAPE [ 227.768] (II) Initializing built-in extension MIT-SHM [ 227.768] (II) Initializing built-in extension XInputExtension [ 227.768] (II) Initializing built-in extension XTEST [ 227.768] (II) Initializing built-in extension BIG-REQUESTS [ 227.768] (II) Initializing built-in extension SYNC [ 227.768] (II) Initializing built-in extension XKEYBOARD [ 227.768] (II) Initializing built-in extension XC-MISC [ 227.768] (II) Initializing built-in extension XINERAMA [ 227.768] (II) Initializing built-in extension XFIXES [ 227.768] (II) Initializing built-in extension RENDER [ 227.768] (II) Initializing built-in extension RANDR [ 227.768] (II) Initializing built-in extension COMPOSITE [ 227.768] (II) Initializing built-in extension DAMAGE [ 228.013] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 228.013] (II) AIGLX: enabled GLX_INTEL_swap_event [ 228.013] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 228.013] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 228.013] (II) AIGLX: Loaded and initialized i965 [ 228.013] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 228.139] (II) intel(0): Setting screen physical size to 508 x 285 [ 228.433] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 228.433] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 228.433] (**) Power Button: Applying InputClass "Keyboard" [ 228.433] (II) LoadModule: "evdev" [ 228.433] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.443] (II) Module evdev: vendor="X.Org Foundation" [ 228.444] compiled for 1.11.4, module version = 2.6.0 [ 228.444] Module class: X.Org XInput Driver [ 228.444] ABI class: X.Org XInput driver, version 13.0 [ 228.444] (II) Using input driver 'evdev' for 'Power Button' [ 228.444] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.444] (**) Power Button: always reports core events [ 228.444] (**) Power Button: Device: "/dev/input/event2" [ 228.444] (--) Power Button: Found keys [ 228.444] (II) Power Button: Configuring as keyboard [ 228.444] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 228.444] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 228.444] (**) Option "xkb_rules" "evdev" [ 228.444] (**) Option "xkb_model" "evdev" [ 228.444] (**) Option "xkb_layout" "de" [ 228.444] (**) Option "xkb_variant" "nodeadkeys" [ 228.478] (II) config/udev: Adding input device Video Bus (/dev/input/event10) [ 228.478] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 228.478] (**) Video Bus: Applying InputClass "Keyboard" [ 228.478] (II) Using input driver 'evdev' for 'Video Bus' [ 228.478] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.478] (**) Video Bus: always reports core events [ 228.478] (**) Video Bus: Device: "/dev/input/event10" [ 228.478] (--) Video Bus: Found keys [ 228.478] (II) Video Bus: Configuring as keyboard [ 228.478] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10/event10" [ 228.478] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 228.478] (**) Option "xkb_rules" "evdev" [ 228.478] (**) Option "xkb_model" "evdev" [ 228.478] (**) Option "xkb_layout" "de" [ 228.478] (**) Option "xkb_variant" "nodeadkeys" [ 228.478] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 228.478] (II) No input driver specified, ignoring this device. [ 228.478] (II) This device may have been added with another device file. [ 228.478] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 228.478] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 228.478] (**) Sleep Button: Applying InputClass "Keyboard" [ 228.478] (II) Using input driver 'evdev' for 'Sleep Button' [ 228.478] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.478] (**) Sleep Button: always reports core events [ 228.478] (**) Sleep Button: Device: "/dev/input/event1" [ 228.478] (--) Sleep Button: Found keys [ 228.478] (II) Sleep Button: Configuring as keyboard [ 228.478] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1" [ 228.478] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 228.478] (**) Option "xkb_rules" "evdev" [ 228.478] (**) Option "xkb_model" "evdev" [ 228.478] (**) Option "xkb_layout" "de" [ 228.478] (**) Option "xkb_variant" "nodeadkeys" [ 228.478] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event5) [ 228.478] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" [ 228.478] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "mouse-all" [ 228.478] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse' [ 228.478] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.478] (**) Logitech USB-PS/2 Optical Mouse: always reports core events [ 228.478] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event5" [ 228.478] (--) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons [ 228.478] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) [ 228.478] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes [ 228.478] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes [ 228.478] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse [ 228.478] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support [ 228.478] (**) Option "Emulate3Buttons" "no" [ 228.478] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 [ 228.478] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 228.478] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.0/input/input5/event5" [ 228.478] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9) [ 228.479] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. [ 228.479] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1 [ 228.479] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0 [ 228.479] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000 [ 228.479] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4 [ 228.479] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1) [ 228.479] (II) No input driver specified, ignoring this device. [ 228.479] (II) This device may have been added with another device file. [ 228.479] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event6) [ 228.479] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall" [ 228.479] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "Keyboard" [ 228.479] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard' [ 228.479] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.479] (**) Logitech Logitech Illuminated Keyboard: always reports core events [ 228.479] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event6" [ 228.479] (--) Logitech Logitech Illuminated Keyboard: Found keys [ 228.479] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard [ 228.479] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6:1.0/input/input6/event6" [ 228.479] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 10) [ 228.479] (**) Option "xkb_rules" "evdev" [ 228.479] (**) Option "xkb_model" "evdev" [ 228.479] (**) Option "xkb_layout" "de" [ 228.479] (**) Option "xkb_variant" "nodeadkeys" [ 228.479] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event7) [ 228.479] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall" [ 228.479] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "Keyboard" [ 228.479] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard' [ 228.479] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.479] (**) Logitech Logitech Illuminated Keyboard: always reports core events [ 228.479] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event7" [ 228.479] (--) Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons [ 228.479] (--) Logitech Logitech Illuminated Keyboard: Found scroll wheel(s) [ 228.479] (--) Logitech Logitech Illuminated Keyboard: Found relative axes [ 228.479] (--) Logitech Logitech Illuminated Keyboard: Found absolute axes [ 228.479] (--) Logitech Logitech Illuminated Keyboard: Found keys [ 228.479] (II) Logitech Logitech Illuminated Keyboard: Configuring as mouse [ 228.479] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard [ 228.479] (II) Logitech Logitech Illuminated Keyboard: Adding scrollwheel support [ 228.479] (**) Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5 [ 228.479] (**) Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 228.479] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6:1.1/input/input7/event7" [ 228.479] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 11) [ 228.479] (**) Option "xkb_rules" "evdev" [ 228.479] (**) Option "xkb_model" "evdev" [ 228.479] (**) Option "xkb_layout" "de" [ 228.479] (**) Option "xkb_variant" "nodeadkeys" [ 228.479] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes. [ 228.479] (II) Logitech Logitech Illuminated Keyboard: initialized for absolute axes. [ 228.479] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1 [ 228.480] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0 [ 228.480] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000 [ 228.480] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4 [ 228.480] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8) [ 228.480] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall" [ 228.480] (**) Integrated Camera: Applying InputClass "Keyboard" [ 228.480] (II) Using input driver 'evdev' for 'Integrated Camera' [ 228.480] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.480] (**) Integrated Camera: always reports core events [ 228.480] (**) Integrated Camera: Device: "/dev/input/event8" [ 228.480] (--) Integrated Camera: Found keys [ 228.480] (II) Integrated Camera: Configuring as keyboard [ 228.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event8" [ 228.480] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 12) [ 228.480] (**) Option "xkb_rules" "evdev" [ 228.480] (**) Option "xkb_model" "evdev" [ 228.480] (**) Option "xkb_layout" "de" [ 228.480] (**) Option "xkb_variant" "nodeadkeys" [ 228.480] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 228.480] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 228.480] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard" [ 228.480] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 228.480] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.480] (**) AT Translated Set 2 keyboard: always reports core events [ 228.480] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 228.480] (--) AT Translated Set 2 keyboard: Found keys [ 228.480] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 228.480] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 228.480] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13) [ 228.480] (**) Option "xkb_rules" "evdev" [ 228.480] (**) Option "xkb_model" "evdev" [ 228.480] (**) Option "xkb_layout" "de" [ 228.480] (**) Option "xkb_variant" "nodeadkeys" [ 228.480] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4) [ 228.480] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 228.480] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 228.480] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad" [ 228.480] (II) LoadModule: "synaptics" [ 228.480] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 228.483] (II) Module synaptics: vendor="X.Org Foundation" [ 228.483] compiled for 1.11.4, module version = 1.5.0 [ 228.483] Module class: X.Org XInput Driver [ 228.483] ABI class: X.Org XInput driver, version 13.0 [ 228.483] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 228.483] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 228.483] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 228.483] (**) Option "Device" "/dev/input/event4" [ 228.529] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 [ 228.529] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820 [ 228.529] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 228.529] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0 [ 228.529] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 228.529] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 228.529] (**) Option "SHMConfig" "on" [ 228.529] (**) Option "EmulateTwoFingerMinZ" "0" [ 228.529] (**) Option "VertEdgeScroll" "on" [ 228.529] (**) Option "HorizEdgeScroll" "on" [ 228.529] (**) Option "VertTwoFingerScroll" "on" [ 228.529] (**) Option "HorizTwoFingerScroll" "on" [ 228.529] (**) Option "TapButton1" "1" [ 228.529] (**) Option "TapButton2" "2" [ 228.529] (**) Option "TapButton3" "3" [ 228.529] (**) Option "CircularScrolling" "on" [ 228.529] (**) Option "CircScrollTrigger" "2" [ 228.545] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 228.545] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 228.561] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4" [ 228.561] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14) [ 228.561] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 228.561] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 228.561] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036 [ 228.561] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 228.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 228.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 228.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 228.561] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 228.562] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 228.562] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 228.563] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9) [ 228.563] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" [ 228.563] (**) ThinkPad Extra Buttons: Applying InputClass "Keyboard" [ 228.563] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' [ 228.563] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 228.563] (**) ThinkPad Extra Buttons: always reports core events [ 228.563] (**) ThinkPad Extra Buttons: Device: "/dev/input/event9" [ 228.563] (--) ThinkPad Extra Buttons: Found keys [ 228.563] (II) ThinkPad Extra Buttons: Configuring as keyboard [ 228.563] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9" [ 228.563] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15) [ 228.563] (**) Option "xkb_rules" "evdev" [ 228.563] (**) Option "xkb_model" "evdev" [ 228.563] (**) Option "xkb_layout" "de" [ 228.563] (**) Option "xkb_variant" "nodeadkeys" [ 232.247] (II) intel(0): EDID vendor "AUO", prod id 8510 [ 232.247] (II) intel(0): Printing DDC gathered Modelines: [ 232.247] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz) [ 232.247] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz)