helper_set_config], 
[  648.277056] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:35] #connectors=1 (x y) (0 0)
[  648.277060] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  648.277062] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[  648.277065] [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
[  648.277068] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  648.277070] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  648.277072] [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
[  648.277076] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
[  648.277078] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  648.277325] [drm:intel_dp_link_down], 
[  648.294813] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  648.299932] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  648.347696] [drm:intel_wait_for_vblank], vblank wait timed out
[  648.449652] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  648.451999] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  648.452006] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  648.452011] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  648.452016] [drm:intel_update_fbc], 
[  648.452024] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  648.452028] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  648.452033] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  648.452036] [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
[  648.503671] [drm:intel_wait_for_vblank], vblank wait timed out
[  648.503679] [drm:ironlake_update_plane], Writing base 021A9000 00000000 0 0 7680
[  648.503685] [drm:intel_update_fbc], 
[  648.555604] [drm:intel_wait_for_vblank], vblank wait timed out
[  648.555610] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  648.555616] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  648.555621] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  648.555627] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:36:1920x1080]
[  648.555633] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  648.555637] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  648.555642] [drm:ironlake_write_eld], ELD on pipe A
[  648.555646] [drm:ironlake_write_eld], Audio directed to unknown port
[  648.555649] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  648.555663] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  648.555668] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  648.555673] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  648.607582] [drm:intel_wait_for_vblank], vblank wait timed out
[  648.659563] [drm:intel_wait_for_vblank], vblank wait timed out
[  648.659873] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  648.659877] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  648.660033] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  648.660036] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  648.660039] [drm:ironlake_fdi_link_train], FDI train done
[  648.661261] [drm:intel_update_fbc], 
[  648.661556] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  648.666685] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  648.712540] [drm:intel_wait_for_vblank], vblank wait timed out
[  648.712851] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  648.713771] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  648.714593] [drm:intel_dp_start_link_train], clock recovery OK
[  648.720386] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  648.720388] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  648.720400] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  648.721330] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  648.721332] [drm:intel_crt_detect], CRT not detected via hotplug
[  648.721333] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  648.721669] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  648.721675] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  648.721989] [drm:intel_dp_detect], DPCD: 110a840101000000
[  648.723020] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  648.750112] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  648.761861] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  648.777231] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  648.777235] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  648.777240] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  648.972499] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  648.981164] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  648.983319] HDMI: available speakers: FL/FR
[  648.985500] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  653.779365] [drm:drm_mode_addfb], [FB:36]
[  653.779393] [drm:drm_mode_setcrtc], [CRTC:3]
[  653.779398] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  653.779400] [drm:drm_crtc_helper_set_config], 
[  653.779401] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0)
[  653.779409] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  653.779411] [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
[  653.779414] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
[  653.779417] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  653.779419] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  653.779420] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
[  653.779424] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
[  653.779427] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  653.779670] [drm:intel_dp_link_down], 
[  653.797512] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  653.802608] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  653.850380] [drm:intel_wait_for_vblank], vblank wait timed out
[  653.952292] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  653.958753] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  653.958759] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  653.958765] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  653.958770] [drm:intel_update_fbc], 
[  653.958777] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  653.958782] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  653.958787] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  653.958790] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
[  654.010304] [drm:intel_wait_for_vblank], vblank wait timed out
[  654.010313] [drm:ironlake_update_plane], Writing base 02992000 00000000 0 0 7680
[  654.010320] [drm:intel_update_fbc], 
[  654.062219] [drm:intel_wait_for_vblank], vblank wait timed out
[  654.062225] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  654.062231] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  654.062237] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  654.062244] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:39:1920x1080]
[  654.062251] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  654.062256] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  654.062262] [drm:ironlake_write_eld], ELD on pipe A
[  654.062267] [drm:ironlake_write_eld], Audio directed to unknown port
[  654.062271] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  654.062285] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  654.062291] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  654.062297] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  654.114198] [drm:intel_wait_for_vblank], vblank wait timed out
[  654.166176] [drm:intel_wait_for_vblank], vblank wait timed out
[  654.166486] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  654.166490] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  654.166647] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  654.166651] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  654.166654] [drm:ironlake_fdi_link_train], FDI train done
[  654.167872] [drm:intel_update_fbc], 
[  654.168184] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  654.173318] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  654.219219] [drm:intel_wait_for_vblank], vblank wait timed out
[  654.219531] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  654.220354] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  654.221177] [drm:intel_dp_start_link_train], clock recovery OK
[  654.226992] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  654.227000] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  654.227083] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  654.228025] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  654.228031] [drm:intel_crt_detect], CRT not detected via hotplug
[  654.228036] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  654.228373] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  654.228379] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  654.228693] [drm:intel_dp_detect], DPCD: 110a840101000000
[  654.229725] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  654.246804] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  654.256831] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  654.283950] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  654.283955] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  654.283959] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  654.479109] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  654.485412] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  654.490325] HDMI: available speakers: FL/FR
[  654.495251] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  659.288688] [drm:drm_mode_addfb], [FB:39]
[  659.288713] [drm:drm_mode_setcrtc], [CRTC:3]
[  659.288720] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  659.288723] [drm:drm_crtc_helper_set_config], 
[  659.288724] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
[  659.288729] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  659.288730] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
[  659.288733] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[  659.288737] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  659.288738] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  659.288740] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[  659.288744] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
[  659.288746] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  659.288955] [drm:intel_dp_link_down], 
[  659.307039] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  659.312201] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  659.359978] [drm:intel_wait_for_vblank], vblank wait timed out
[  659.461933] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  659.468381] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  659.468388] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  659.468393] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  659.468398] [drm:intel_update_fbc], 
[  659.468406] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  659.468410] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  659.468415] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  659.468418] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[  659.519906] [drm:intel_wait_for_vblank], vblank wait timed out
[  659.519914] [drm:ironlake_update_plane], Writing base 0317B000 00000000 0 0 7680
[  659.519920] [drm:intel_update_fbc], 
[  659.571884] [drm:intel_wait_for_vblank], vblank wait timed out
[  659.571890] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  659.571895] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  659.571901] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  659.571906] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:46:1920x1080]
[  659.571912] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  659.571917] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  659.571922] [drm:ironlake_write_eld], ELD on pipe A
[  659.571926] [drm:ironlake_write_eld], Audio directed to unknown port
[  659.571929] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  659.571943] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  659.571947] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  659.571952] [drm:ironlake_check_srwm], watermark 2: display plane 102, fbc lines 3, cursor 6
[  659.623862] [drm:intel_wait_for_vblank], vblank wait timed out
[  659.675883] [drm:intel_wait_for_vblank], vblank wait timed out
[  659.676194] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  659.676197] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  659.676353] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  659.676357] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  659.676359] [drm:ironlake_fdi_link_train], FDI train done
[  659.677583] [drm:intel_update_fbc], 
[  659.677877] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  659.682990] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  659.729824] [drm:intel_wait_for_vblank], vblank wait timed out
[  659.730136] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  659.731057] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  659.731875] [drm:intel_dp_start_link_train], clock recovery OK
[  659.737672] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  659.737674] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  659.737687] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  659.738617] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  659.738620] [drm:intel_crt_detect], CRT not detected via hotplug
[  659.738627] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  659.739010] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  659.739017] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  659.739332] [drm:intel_dp_detect], DPCD: 110a840101000000
[  659.740414] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  659.754194] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  659.767636] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  659.794815] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  659.794820] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  659.794825] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  659.988771] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  659.997776] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  659.999937] HDMI: available speakers: FL/FR
[  660.002080] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  664.790361] [drm:drm_mode_addfb], [FB:46]
[  664.790387] [drm:drm_mode_setcrtc], [CRTC:3]
[  664.790394] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  664.790396] [drm:drm_crtc_helper_set_config], 
[  664.790398] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[  664.790403] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  664.790405] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[  664.790408] [drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[  664.790411] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  664.790413] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  664.790415] [drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[  664.790419] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
[  664.790421] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  664.790631] [drm:intel_dp_link_down], 
[  664.808794] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  664.813923] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  664.861620] [drm:intel_wait_for_vblank], vblank wait timed out
[  664.963618] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  664.965953] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 10, cursor: 6
[  664.965961] [drm:ironlake_check_srwm], watermark 1: display plane 99, fbc lines 3, cursor 6
[  664.965968] [drm:ironlake_check_srwm], watermark 2: display plane 202, fbc lines 5, cursor 10
[  664.965974] [drm:intel_update_fbc], 
[  664.965982] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  664.965988] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  664.965993] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  664.965997] [drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[  665.017563] [drm:intel_wait_for_vblank], vblank wait timed out
[  665.017572] [drm:ironlake_update_plane], Writing base 03964000 00000000 0 0 6400
[  665.017579] [drm:intel_update_fbc], 
[  665.069541] [drm:intel_wait_for_vblank], vblank wait timed out
[  665.069548] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 10, cursor: 6
[  665.069554] [drm:ironlake_check_srwm], watermark 1: display plane 99, fbc lines 3, cursor 6
[  665.069561] [drm:ironlake_check_srwm], watermark 2: display plane 202, fbc lines 5, cursor 10
[  665.069568] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:47:1600x1200]
[  665.069575] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  665.069580] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  665.069586] [drm:ironlake_write_eld], ELD on pipe A
[  665.069591] [drm:ironlake_write_eld], Audio directed to unknown port
[  665.069595] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  665.069608] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 10, cursor: 6
[  665.069614] [drm:ironlake_check_srwm], watermark 1: display plane 99, fbc lines 3, cursor 6
[  665.069620] [drm:ironlake_check_srwm], watermark 2: display plane 202, fbc lines 5, cursor 10
[  665.121509] [drm:intel_wait_for_vblank], vblank wait timed out
[  665.173528] [drm:intel_wait_for_vblank], vblank wait timed out
[  665.173839] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  665.173842] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  665.173999] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  665.174002] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  665.174005] [drm:ironlake_fdi_link_train], FDI train done
[  665.175227] [drm:intel_update_fbc], 
[  665.175528] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  665.180557] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  665.227464] [drm:intel_wait_for_vblank], vblank wait timed out
[  665.227776] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  665.228706] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  665.229530] [drm:intel_dp_start_link_train], clock recovery OK
[  665.235381] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  665.235393] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  665.251936] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  665.486441] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  665.495008] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  665.497180] HDMI: available speakers: FL/FR
[  665.499367] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  670.291155] [drm:drm_mode_addfb], [FB:47]
[  670.291181] [drm:drm_mode_setcrtc], [CRTC:3]
[  670.291186] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  670.291188] [drm:drm_crtc_helper_set_config], 
[  670.291189] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:47] #connectors=1 (x y) (0 0)
[  670.291195] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  670.291197] [drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[  670.291200] [drm:drm_mode_debug_printmodeline], Modeline 48:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  670.291204] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  670.291206] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  670.291207] [drm:drm_mode_debug_printmodeline], Modeline 48:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  670.291212] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
[  670.291215] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  670.291373] [drm:intel_dp_link_down], 
[  670.309439] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  670.314530] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  670.362296] [drm:intel_wait_for_vblank], vblank wait timed out
[  670.464252] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  670.470601] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[  670.470609] [drm:ironlake_check_srwm], watermark 1: display plane 82, fbc lines 4, cursor 6
[  670.470616] [drm:ironlake_check_srwm], watermark 2: display plane 162, fbc lines 5, cursor 10
[  670.470622] [drm:intel_update_fbc], 
[  670.470630] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  670.470636] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  670.470641] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  670.470645] [drm:drm_mode_debug_printmodeline], Modeline 48:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  670.522234] [drm:intel_wait_for_vblank], vblank wait timed out
[  670.522242] [drm:ironlake_update_plane], Writing base 040B7000 00000000 0 0 5120
[  670.522248] [drm:intel_update_fbc], 
[  670.574164] [drm:intel_wait_for_vblank], vblank wait timed out
[  670.574170] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[  670.574175] [drm:ironlake_check_srwm], watermark 1: display plane 82, fbc lines 4, cursor 6
[  670.574181] [drm:ironlake_check_srwm], watermark 2: display plane 162, fbc lines 5, cursor 10
[  670.574187] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:48:1280x1024]
[  670.574193] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  670.574197] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  670.574202] [drm:ironlake_write_eld], ELD on pipe A
[  670.574206] [drm:ironlake_write_eld], Audio directed to unknown port
[  670.574209] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  670.574223] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[  670.574227] [drm:ironlake_check_srwm], watermark 1: display plane 82, fbc lines 4, cursor 6
[  670.574232] [drm:ironlake_check_srwm], watermark 2: display plane 162, fbc lines 5, cursor 10
[  670.626147] [drm:intel_wait_for_vblank], vblank wait timed out
[  670.678125] [drm:intel_wait_for_vblank], vblank wait timed out
[  670.678436] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  670.678440] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  670.678596] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  670.678599] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  670.678602] [drm:ironlake_fdi_link_train], FDI train done
[  670.679818] [drm:intel_update_fbc], 
[  670.680106] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  670.682374] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  670.731070] [drm:intel_wait_for_vblank], vblank wait timed out
[  670.731383] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  670.732309] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  670.733234] [drm:intel_dp_start_link_train], clock recovery OK
[  670.739048] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  670.739056] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  670.739080] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  670.740016] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  670.740022] [drm:intel_crt_detect], CRT not detected via hotplug
[  670.740026] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  670.740413] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  670.740419] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  670.740733] [drm:intel_dp_detect], DPCD: 110a840101000000
[  670.741801] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  670.752239] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  670.769015] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  670.796180] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  670.796185] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  670.796190] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  670.985061] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  670.994072] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  670.996232] HDMI: available speakers: FL/FR
[  670.998388] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  675.790438] [drm:drm_mode_addfb], [FB:48]
[  675.790463] [drm:drm_mode_setcrtc], [CRTC:3]
[  675.790471] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  675.790473] [drm:drm_crtc_helper_set_config], 
[  675.790475] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
[  675.790479] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  675.790481] [drm:drm_mode_debug_printmodeline], Modeline 48:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  675.790484] [drm:drm_mode_debug_printmodeline], Modeline 49:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[  675.790487] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  675.790489] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  675.790491] [drm:drm_mode_debug_printmodeline], Modeline 49:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[  675.790495] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 2 clock 162000
[  675.790497] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  675.790706] [drm:intel_dp_link_down], 
[  675.808084] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  675.810923] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  675.860949] [drm:intel_wait_for_vblank], vblank wait timed out
[  675.962861] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  675.969321] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  675.969328] [drm:ironlake_check_srwm], watermark 1: display plane 67, fbc lines 3, cursor 6
[  675.969333] [drm:ironlake_check_srwm], watermark 2: display plane 148, fbc lines 4, cursor 10
[  675.969338] [drm:intel_update_fbc], 
[  675.969345] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  675.969350] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  675.969355] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  675.969358] [drm:drm_mode_debug_printmodeline], Modeline 49:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[  676.020873] [drm:intel_wait_for_vblank], vblank wait timed out
[  676.020881] [drm:ironlake_update_plane], Writing base 045B7000 00000000 0 0 5120
[  676.020888] [drm:intel_update_fbc], 
[  676.072788] [drm:intel_wait_for_vblank], vblank wait timed out
[  676.072794] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  676.072800] [drm:ironlake_check_srwm], watermark 1: display plane 67, fbc lines 3, cursor 6
[  676.072806] [drm:ironlake_check_srwm], watermark 2: display plane 148, fbc lines 4, cursor 10
[  676.072813] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:49:1280x1024]
[  676.072819] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  676.072825] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  676.072831] [drm:ironlake_write_eld], ELD on pipe A
[  676.072835] [drm:ironlake_write_eld], Audio directed to unknown port
[  676.072839] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  676.072854] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  676.072859] [drm:ironlake_check_srwm], watermark 1: display plane 67, fbc lines 3, cursor 6
[  676.072865] [drm:ironlake_check_srwm], watermark 2: display plane 148, fbc lines 4, cursor 10
[  676.124767] [drm:intel_wait_for_vblank], vblank wait timed out
[  676.176745] [drm:intel_wait_for_vblank], vblank wait timed out
[  676.177055] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  676.177059] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  676.177216] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  676.177220] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  676.177223] [drm:ironlake_fdi_link_train], FDI train done
[  676.178440] [drm:intel_update_fbc], 
[  676.178739] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  676.183860] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  676.229791] [drm:intel_wait_for_vblank], vblank wait timed out
[  676.230102] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  676.231027] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  676.231851] [drm:intel_dp_start_link_train], clock recovery OK
[  676.237668] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  676.237749] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  676.237789] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  676.238726] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  676.238728] [drm:intel_crt_detect], CRT not detected via hotplug
[  676.238735] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  676.239066] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  676.239071] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  676.239385] [drm:intel_dp_detect], DPCD: 110a840101000000
[  676.240449] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  676.254212] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  676.267658] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  676.294927] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  676.294932] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  676.294937] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  676.489691] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  676.495889] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  676.500808] HDMI: available speakers: FL/FR
[  676.505743] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  681.280050] [drm:drm_mode_addfb], [FB:49]
[  681.280077] [drm:drm_mode_setcrtc], [CRTC:3]
[  681.280082] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  681.280084] [drm:drm_crtc_helper_set_config], 
[  681.280086] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:49] #connectors=1 (x y) (0 0)
[  681.280092] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  681.280094] [drm:drm_mode_debug_printmodeline], Modeline 49:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[  681.280096] [drm:drm_mode_debug_printmodeline], Modeline 50:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  681.280100] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  681.280102] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  681.280103] [drm:drm_mode_debug_printmodeline], Modeline 50:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  681.280108] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 2 clock 162000
[  681.280111] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  681.280329] [drm:intel_dp_link_down], 
[  681.297664] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  681.302916] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  681.350555] [drm:intel_wait_for_vblank], vblank wait timed out
[  681.452511] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  681.454889] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  681.454897] [drm:ironlake_check_srwm], watermark 1: display plane 67, fbc lines 3, cursor 6
[  681.454904] [drm:ironlake_check_srwm], watermark 2: display plane 146, fbc lines 5, cursor 10
[  681.454910] [drm:intel_update_fbc], 
[  681.454918] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  681.454924] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  681.454930] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  681.454933] [drm:drm_mode_debug_printmodeline], Modeline 50:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  681.506530] [drm:intel_wait_for_vblank], vblank wait timed out
[  681.506538] [drm:ironlake_update_plane], Writing base 04AB7000 00000000 0 0 4608
[  681.506544] [drm:intel_update_fbc], 
[  681.557508] [drm:intel_wait_for_vblank], vblank wait timed out
[  681.557514] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  681.557519] [drm:ironlake_check_srwm], watermark 1: display plane 67, fbc lines 3, cursor 6
[  681.557524] [drm:ironlake_check_srwm], watermark 2: display plane 146, fbc lines 5, cursor 10
[  681.557530] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:50:1152x864]
[  681.557536] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  681.557540] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  681.557545] [drm:ironlake_write_eld], ELD on pipe A
[  681.557549] [drm:ironlake_write_eld], Audio directed to unknown port
[  681.557552] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  681.557566] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  681.557571] [drm:ironlake_check_srwm], watermark 1: display plane 67, fbc lines 3, cursor 6
[  681.557576] [drm:ironlake_check_srwm], watermark 2: display plane 146, fbc lines 5, cursor 10
[  681.609485] [drm:intel_wait_for_vblank], vblank wait timed out
[  681.661419] [drm:intel_wait_for_vblank], vblank wait timed out
[  681.661730] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  681.661733] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  681.661889] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  681.661893] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  681.661896] [drm:ironlake_fdi_link_train], FDI train done
[  681.663112] [drm:intel_update_fbc], 
[  681.663416] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  681.668457] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  681.714401] [drm:intel_wait_for_vblank], vblank wait timed out
[  681.714613] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  681.715541] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  681.716364] [drm:intel_dp_start_link_train], clock recovery OK
[  681.722207] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  681.722215] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  681.722296] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  681.723240] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  681.723247] [drm:intel_crt_detect], CRT not detected via hotplug
[  681.723252] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  681.723595] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  681.723602] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  681.723916] [drm:intel_dp_detect], DPCD: 110a840101000000
[  681.724965] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  681.735421] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  681.752128] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  681.779397] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  681.779402] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  681.779407] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  681.974367] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  681.983016] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  681.987935] HDMI: available speakers: FL/FR
[  681.992944] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  686.771639] [drm:drm_mode_addfb], [FB:50]
[  686.771665] [drm:drm_mode_setcrtc], [CRTC:3]
[  686.771670] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  686.771672] [drm:drm_crtc_helper_set_config], 
[  686.771673] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:50] #connectors=1 (x y) (0 0)
[  686.771679] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  686.771681] [drm:drm_mode_debug_printmodeline], Modeline 50:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  686.771684] [drm:drm_mode_debug_printmodeline], Modeline 51:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[  686.771688] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  686.771690] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  686.771691] [drm:drm_mode_debug_printmodeline], Modeline 51:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[  686.771696] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
[  686.771699] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  686.771914] [drm:intel_dp_link_down], 
[  686.789304] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  686.794454] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  686.842202] [drm:intel_wait_for_vblank], vblank wait timed out
[  686.944199] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  686.950574] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  686.950581] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  686.950588] [drm:ironlake_check_srwm], watermark 2: display plane 82, fbc lines 4, cursor 6
[  686.950594] [drm:intel_update_fbc], 
[  686.950602] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  686.950608] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  686.950614] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  686.950617] [drm:drm_mode_debug_printmodeline], Modeline 51:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[  687.002143] [drm:intel_wait_for_vblank], vblank wait timed out
[  687.002152] [drm:ironlake_update_plane], Writing base 04E83000 00000000 0 0 5120
[  687.002159] [drm:intel_update_fbc], 
[  687.054153] [drm:intel_wait_for_vblank], vblank wait timed out
[  687.054159] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  687.054164] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  687.054169] [drm:ironlake_check_srwm], watermark 2: display plane 82, fbc lines 4, cursor 6
[  687.054175] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:51:1280x720]
[  687.054181] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  687.054185] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  687.054190] [drm:ironlake_write_eld], ELD on pipe A
[  687.054194] [drm:ironlake_write_eld], Audio directed to unknown port
[  687.054197] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  687.054211] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  687.054216] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  687.054221] [drm:ironlake_check_srwm], watermark 2: display plane 82, fbc lines 4, cursor 6
[  687.106131] [drm:intel_wait_for_vblank], vblank wait timed out
[  687.158064] [drm:intel_wait_for_vblank], vblank wait timed out
[  687.158374] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  687.158378] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  687.158534] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  687.158537] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  687.158540] [drm:ironlake_fdi_link_train], FDI train done
[  687.159756] [drm:intel_update_fbc], 
[  687.160051] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  687.165127] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  687.211044] [drm:intel_wait_for_vblank], vblank wait timed out
[  687.211355] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  687.212287] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  687.213110] [drm:intel_dp_start_link_train], clock recovery OK
[  687.218966] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  687.219032] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  687.219071] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  687.220015] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  687.220022] [drm:intel_crt_detect], CRT not detected via hotplug
[  687.220027] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  687.220358] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  687.220364] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  687.220678] [drm:intel_dp_detect], DPCD: 110a840101000000
[  687.221742] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  687.238771] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  687.248896] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  687.276019] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  687.276025] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  687.276030] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  687.471001] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  687.479996] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  687.484918] HDMI: available speakers: FL/FR
[  687.489936] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  692.264397] [drm:drm_mode_addfb], [FB:51]
[  692.264422] [drm:drm_mode_setcrtc], [CRTC:3]
[  692.264429] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  692.264431] [drm:drm_crtc_helper_set_config], 
[  692.264432] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:51] #connectors=1 (x y) (0 0)
[  692.264437] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  692.264439] [drm:drm_mode_debug_printmodeline], Modeline 51:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[  692.264442] [drm:drm_mode_debug_printmodeline], Modeline 52:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[  692.264445] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  692.264447] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  692.264448] [drm:drm_mode_debug_printmodeline], Modeline 52:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[  692.264452] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
[  692.264455] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  692.264694] [drm:intel_dp_link_down], 
[  692.282025] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  692.287201] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  692.334890] [drm:intel_wait_for_vblank], vblank wait timed out
[  692.436802] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  692.443260] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  692.443267] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  692.443272] [drm:ironlake_check_srwm], watermark 2: display plane 82, fbc lines 4, cursor 6
[  692.443277] [drm:intel_update_fbc], 
[  692.443284] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  692.443289] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  692.443294] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  692.443297] [drm:drm_mode_debug_printmodeline], Modeline 52:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[  692.494822] [drm:intel_wait_for_vblank], vblank wait timed out
[  692.494829] [drm:ironlake_update_plane], Writing base 05207000 00000000 0 0 5120
[  692.494835] [drm:intel_update_fbc], 
[  692.546755] [drm:intel_wait_for_vblank], vblank wait timed out
[  692.546761] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  692.546767] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  692.546772] [drm:ironlake_check_srwm], watermark 2: display plane 82, fbc lines 4, cursor 6
[  692.546778] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:52:1280x720]
[  692.546784] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  692.546788] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  692.546793] [drm:ironlake_write_eld], ELD on pipe A
[  692.546797] [drm:ironlake_write_eld], Audio directed to unknown port
[  692.546800] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  692.546814] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  692.546819] [drm:ironlake_check_srwm], watermark 1: display plane 47, fbc lines 3, cursor 6
[  692.546824] [drm:ironlake_check_srwm], watermark 2: display plane 82, fbc lines 4, cursor 6
[  692.598709] [drm:intel_wait_for_vblank], vblank wait timed out
[  692.650710] [drm:intel_wait_for_vblank], vblank wait timed out
[  692.651020] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  692.651024] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  692.651180] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  692.651183] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  692.651186] [drm:ironlake_fdi_link_train], FDI train done
[  692.652408] [drm:intel_update_fbc], 
[  692.652698] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  692.657860] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  692.703732] [drm:intel_wait_for_vblank], vblank wait timed out
[  692.704043] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  692.704967] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  692.705790] [drm:intel_dp_start_link_train], clock recovery OK
[  692.711598] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  692.711603] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  692.711642] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  692.712576] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  692.712578] [drm:intel_crt_detect], CRT not detected via hotplug
[  692.712580] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  692.712903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  692.712905] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  692.713216] [drm:intel_dp_detect], DPCD: 110a840101000000
[  692.714242] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  692.728080] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  692.741376] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  692.768573] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  692.768575] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  692.768576] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  692.963645] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  692.972711] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  692.977692] HDMI: available speakers: FL/FR
[  692.982701] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  697.759071] [drm:drm_mode_addfb], [FB:52]
[  697.759095] [drm:drm_mode_setcrtc], [CRTC:3]
[  697.759100] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  697.759102] [drm:drm_crtc_helper_set_config], 
[  697.759103] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0)
[  697.759109] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  697.759111] [drm:drm_mode_debug_printmodeline], Modeline 52:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[  697.759114] [drm:drm_mode_debug_printmodeline], Modeline 53:"1440x576" 50 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
[  697.759118] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  697.759120] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  697.759122] [drm:drm_mode_debug_printmodeline], Modeline 53:"1440x576" 50 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
[  697.759126] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  697.759129] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  697.759338] [drm:intel_dp_link_down], 
[  697.776639] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  697.781812] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  697.829536] [drm:intel_wait_for_vblank], vblank wait timed out
[  697.931476] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  697.933825] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 4, cursor: 6
[  697.933831] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  697.933838] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  697.933844] [drm:intel_update_fbc], 
[  697.933851] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  697.933857] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  697.933862] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  697.933866] [drm:drm_mode_debug_printmodeline], Modeline 53:"1440x576" 50 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
[  697.985400] [drm:intel_wait_for_vblank], vblank wait timed out
[  697.985408] [drm:ironlake_update_plane], Writing base 0558B000 00000000 0 0 5760
[  697.985415] [drm:intel_update_fbc], 
[  698.037378] [drm:intel_wait_for_vblank], vblank wait timed out
[  698.037384] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 4, cursor: 6
[  698.037390] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  698.037396] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  698.037403] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:53:1440x576]
[  698.037409] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  698.037415] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  698.037420] [drm:ironlake_write_eld], ELD on pipe A
[  698.037425] [drm:ironlake_write_eld], Audio directed to unknown port
[  698.037429] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  698.037443] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 4, cursor: 6
[  698.037449] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  698.037455] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  698.089416] [drm:intel_wait_for_vblank], vblank wait timed out
[  698.141394] [drm:intel_wait_for_vblank], vblank wait timed out
[  698.141705] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  698.141710] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  698.141866] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  698.141870] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  698.141874] [drm:ironlake_fdi_link_train], FDI train done
[  698.143092] [drm:intel_update_fbc], 
[  698.143354] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  698.148426] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  698.195337] [drm:intel_wait_for_vblank], vblank wait timed out
[  698.195648] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  698.196580] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  698.197403] [drm:intel_dp_start_link_train], clock recovery OK
[  698.203259] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  698.203325] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  698.203364] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  698.204301] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  698.204303] [drm:intel_crt_detect], CRT not detected via hotplug
[  698.204305] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  698.204637] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  698.204643] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  698.204956] [drm:intel_dp_detect], DPCD: 110a840101000000
[  698.206036] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  698.223105] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  698.233145] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  698.260315] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  698.260320] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  698.260325] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  698.454323] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  698.462993] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  698.465147] HDMI: available speakers: FL/FR
[  698.467317] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  703.242623] [drm:drm_mode_addfb], [FB:53]
[  703.242649] [drm:drm_mode_setcrtc], [CRTC:3]
[  703.242656] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  703.242658] [drm:drm_crtc_helper_set_config], 
[  703.242660] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[  703.242664] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  703.242666] [drm:drm_mode_debug_printmodeline], Modeline 53:"1440x576" 50 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
[  703.242669] [drm:drm_mode_debug_printmodeline], Modeline 54:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  703.242672] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  703.242674] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  703.242676] [drm:drm_mode_debug_printmodeline], Modeline 54:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  703.242679] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
[  703.242682] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  703.242910] [drm:intel_dp_link_down], 
[  703.260290] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  703.265518] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  703.313144] [drm:intel_wait_for_vblank], vblank wait timed out
[  703.415101] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  703.417543] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  703.417551] [drm:ironlake_check_srwm], watermark 1: display plane 49, fbc lines 3, cursor 6
[  703.417557] [drm:ironlake_check_srwm], watermark 2: display plane 108, fbc lines 4, cursor 10
[  703.417564] [drm:intel_update_fbc], 
[  703.417571] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  703.417576] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  703.417582] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  703.417585] [drm:drm_mode_debug_printmodeline], Modeline 54:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  703.469119] [drm:intel_wait_for_vblank], vblank wait timed out
[  703.469126] [drm:ironlake_update_plane], Writing base 058B5000 00000000 0 0 4096
[  703.469132] [drm:intel_update_fbc], 
[  703.521033] [drm:intel_wait_for_vblank], vblank wait timed out
[  703.521041] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  703.521047] [drm:ironlake_check_srwm], watermark 1: display plane 49, fbc lines 3, cursor 6
[  703.521053] [drm:ironlake_check_srwm], watermark 2: display plane 108, fbc lines 4, cursor 10
[  703.521061] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:54:1024x768]
[  703.521067] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  703.521073] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  703.521078] [drm:ironlake_write_eld], ELD on pipe A
[  703.521083] [drm:ironlake_write_eld], Audio directed to unknown port
[  703.521087] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  703.521102] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[  703.521107] [drm:ironlake_check_srwm], watermark 1: display plane 49, fbc lines 3, cursor 6
[  703.521113] [drm:ironlake_check_srwm], watermark 2: display plane 108, fbc lines 4, cursor 10
[  703.573033] [drm:intel_wait_for_vblank], vblank wait timed out
[  703.625011] [drm:intel_wait_for_vblank], vblank wait timed out
[  703.625322] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  703.625325] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  703.625481] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  703.625484] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  703.625487] [drm:ironlake_fdi_link_train], FDI train done
[  703.626703] [drm:intel_update_fbc], 
[  703.627006] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  703.632124] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  703.678056] [drm:intel_wait_for_vblank], vblank wait timed out
[  703.678364] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  703.679284] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  703.680103] [drm:intel_dp_start_link_train], clock recovery OK
[  703.685902] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  703.685904] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  703.685929] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  703.686861] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  703.686863] [drm:intel_crt_detect], CRT not detected via hotplug
[  703.686865] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  703.687193] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  703.687195] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  703.687505] [drm:intel_dp_detect], DPCD: 110a840101000000
[  703.688599] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  703.699081] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  703.715856] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  703.743154] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  703.743156] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  703.743158] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  703.937938] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  703.946943] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  703.949111] HDMI: available speakers: FL/FR
[  703.951208] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  708.726849] [drm:drm_mode_addfb], [FB:54]
[  708.726873] [drm:drm_mode_setcrtc], [CRTC:3]
[  708.726878] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  708.726883] [drm:drm_crtc_helper_set_config], 
[  708.726884] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:54] #connectors=1 (x y) (0 0)
[  708.726889] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  708.726891] [drm:drm_mode_debug_printmodeline], Modeline 54:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  708.726894] [drm:drm_mode_debug_printmodeline], Modeline 55:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  708.726897] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  708.726899] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  708.726900] [drm:drm_mode_debug_printmodeline], Modeline 55:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  708.726904] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
[  708.726907] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  708.727150] [drm:intel_dp_link_down], 
[  708.744963] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  708.750134] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  708.797836] [drm:intel_wait_for_vblank], vblank wait timed out
[  708.899748] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  708.902128] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[  708.902136] [drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
[  708.902143] [drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
[  708.902149] [drm:intel_update_fbc], 
[  708.902156] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  708.902162] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  708.902167] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  708.902171] [drm:drm_mode_debug_printmodeline], Modeline 55:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  708.953701] [drm:intel_wait_for_vblank], vblank wait timed out
[  708.953710] [drm:ironlake_update_plane], Writing base 05BB5000 00000000 0 0 4096
[  708.953717] [drm:intel_update_fbc], 
[  709.005747] [drm:intel_wait_for_vblank], vblank wait timed out
[  709.005753] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[  709.005758] [drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
[  709.005763] [drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
[  709.005769] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:55:1024x768]
[  709.005774] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  709.005779] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  709.005784] [drm:ironlake_write_eld], ELD on pipe A
[  709.005787] [drm:ironlake_write_eld], Audio directed to unknown port
[  709.005791] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  709.005804] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[  709.005809] [drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
[  709.005814] [drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
[  709.057722] [drm:intel_wait_for_vblank], vblank wait timed out
[  709.109658] [drm:intel_wait_for_vblank], vblank wait timed out
[  709.109968] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  709.109972] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  709.110128] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  709.110131] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  709.110134] [drm:ironlake_fdi_link_train], FDI train done
[  709.111350] [drm:intel_update_fbc], 
[  709.111654] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  709.116703] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  709.162638] [drm:intel_wait_for_vblank], vblank wait timed out
[  709.162949] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  709.163881] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  709.164705] [drm:intel_dp_start_link_train], clock recovery OK
[  709.170560] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  709.170631] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  709.170669] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  709.171612] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  709.171619] [drm:intel_crt_detect], CRT not detected via hotplug
[  709.171624] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  709.171953] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  709.171959] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  709.172273] [drm:intel_dp_detect], DPCD: 110a840101000000
[  709.173305] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  709.187031] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  709.200445] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  709.227558] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  709.227564] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  709.227569] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  709.422562] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  709.431568] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  709.436488] HDMI: available speakers: FL/FR
[  709.441505] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  714.209681] [drm:drm_mode_addfb], [FB:55]
[  714.209706] [drm:drm_mode_setcrtc], [CRTC:3]
[  714.209710] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  714.209712] [drm:drm_crtc_helper_set_config], 
[  714.209714] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:55] #connectors=1 (x y) (0 0)
[  714.209719] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  714.209721] [drm:drm_mode_debug_printmodeline], Modeline 55:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  714.209724] [drm:drm_mode_debug_printmodeline], Modeline 56:"1440x480" 60 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[  714.209728] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  714.209730] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  714.209731] [drm:drm_mode_debug_printmodeline], Modeline 56:"1440x480" 60 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[  714.209736] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  714.209738] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  714.209953] [drm:intel_dp_link_down], 
[  714.227526] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  714.232701] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  714.280445] [drm:intel_wait_for_vblank], vblank wait timed out
[  714.382442] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  714.384746] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 4, cursor: 6
[  714.384752] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  714.384758] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  714.384763] [drm:intel_update_fbc], 
[  714.384768] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  714.384773] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  714.384777] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  714.384780] [drm:drm_mode_debug_printmodeline], Modeline 56:"1440x480" 60 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[  714.436376] [drm:intel_wait_for_vblank], vblank wait timed out
[  714.436383] [drm:ironlake_update_plane], Writing base 05EB5000 00000000 0 0 5760
[  714.436389] [drm:intel_update_fbc], 
[  714.488353] [drm:intel_wait_for_vblank], vblank wait timed out
[  714.488359] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 4, cursor: 6
[  714.488364] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  714.488370] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  714.488375] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:56:1440x480]
[  714.488381] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  714.488386] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  714.488390] [drm:ironlake_write_eld], ELD on pipe A
[  714.488394] [drm:ironlake_write_eld], Audio directed to unknown port
[  714.488397] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  714.488411] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 4, cursor: 6
[  714.488416] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  714.488421] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  714.540334] [drm:intel_wait_for_vblank], vblank wait timed out
[  714.592353] [drm:intel_wait_for_vblank], vblank wait timed out
[  714.592663] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  714.592666] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  714.592822] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  714.592825] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  714.592828] [drm:ironlake_fdi_link_train], FDI train done
[  714.594051] [drm:intel_update_fbc], 
[  714.594343] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  714.599484] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  714.646294] [drm:intel_wait_for_vblank], vblank wait timed out
[  714.646605] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  714.647526] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  714.648345] [drm:intel_dp_start_link_train], clock recovery OK
[  714.654145] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  714.654147] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  714.654158] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  714.655087] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  714.655089] [drm:intel_crt_detect], CRT not detected via hotplug
[  714.655090] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  714.655411] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  714.655413] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  714.655723] [drm:intel_dp_detect], DPCD: 110a840101000000
[  714.656748] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  714.670673] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  714.683874] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  714.710941] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  714.710943] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  714.710944] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  714.905173] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  714.913070] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  714.917963] HDMI: available speakers: FL/FR
[  714.922870] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  719.691866] [drm:drm_mode_addfb], [FB:56]
[  719.691885] [drm:drm_mode_setcrtc], [CRTC:3]
[  719.691889] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  719.691891] [drm:drm_crtc_helper_set_config], 
[  719.691892] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[  719.691898] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  719.691900] [drm:drm_mode_debug_printmodeline], Modeline 56:"1440x480" 60 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[  719.691903] [drm:drm_mode_debug_printmodeline], Modeline 57:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  719.691907] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  719.691910] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  719.691911] [drm:drm_mode_debug_printmodeline], Modeline 57:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  719.691915] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  719.691918] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  719.692127] [drm:intel_dp_link_down], 
[  719.710248] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  719.715335] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  719.763138] [drm:intel_wait_for_vblank], vblank wait timed out
[  719.865049] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  719.867427] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 33, cursor: 6
[  719.867435] [drm:ironlake_check_srwm], watermark 1: display plane 32, fbc lines 3, cursor 6
[  719.867441] [drm:ironlake_check_srwm], watermark 2: display plane 69, fbc lines 4, cursor 10
[  719.867448] [drm:intel_update_fbc], 
[  719.867454] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  719.867460] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  719.867465] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  719.867469] [drm:drm_mode_debug_printmodeline], Modeline 57:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  719.919026] [drm:intel_wait_for_vblank], vblank wait timed out
[  719.919033] [drm:ironlake_update_plane], Writing base 06158000 00000000 0 0 3200
[  719.919039] [drm:intel_update_fbc], 
[  719.971048] [drm:intel_wait_for_vblank], vblank wait timed out
[  719.971054] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 33, cursor: 6
[  719.971059] [drm:ironlake_check_srwm], watermark 1: display plane 32, fbc lines 3, cursor 6
[  719.971065] [drm:ironlake_check_srwm], watermark 2: display plane 69, fbc lines 4, cursor 10
[  719.971070] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:57:800x600]
[  719.971076] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  719.971080] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  719.971085] [drm:ironlake_write_eld], ELD on pipe A
[  719.971089] [drm:ironlake_write_eld], Audio directed to unknown port
[  719.971092] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  719.971105] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 33, cursor: 6
[  719.971109] [drm:ironlake_check_srwm], watermark 1: display plane 32, fbc lines 3, cursor 6
[  719.971114] [drm:ironlake_check_srwm], watermark 2: display plane 69, fbc lines 4, cursor 10
[  720.023023] [drm:intel_wait_for_vblank], vblank wait timed out
[  720.074960] [drm:intel_wait_for_vblank], vblank wait timed out
[  720.075270] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  720.075274] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  720.075430] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  720.075433] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  720.075436] [drm:ironlake_fdi_link_train], FDI train done
[  720.076652] [drm:intel_update_fbc], 
[  720.076957] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  720.079174] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  720.126905] [drm:intel_wait_for_vblank], vblank wait timed out
[  720.127116] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  720.127941] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  720.128764] [drm:intel_dp_start_link_train], clock recovery OK
[  720.134613] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  720.134620] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  720.134701] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  720.135643] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  720.135650] [drm:intel_crt_detect], CRT not detected via hotplug
[  720.135654] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  720.135994] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  720.136000] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  720.136315] [drm:intel_dp_detect], DPCD: 110a840101000000
[  720.137345] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  720.147827] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  720.164386] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  720.191811] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  720.191816] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  720.191820] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  720.381900] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  720.390565] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  720.392705] HDMI: available speakers: FL/FR
[  720.394823] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  725.169833] [drm:drm_mode_addfb], [FB:57]
[  725.169851] [drm:drm_mode_setcrtc], [CRTC:3]
[  725.169855] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  725.169856] [drm:drm_crtc_helper_set_config], 
[  725.169858] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:57] #connectors=1 (x y) (0 0)
[  725.169863] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  725.169865] [drm:drm_mode_debug_printmodeline], Modeline 57:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  725.169868] [drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  725.169872] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  725.169874] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  725.169876] [drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  725.169880] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  725.169883] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  725.170094] [drm:intel_dp_link_down], 
[  725.187862] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  725.193068] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  725.240790] [drm:intel_wait_for_vblank], vblank wait timed out
[  725.342705] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  725.347126] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 32, cursor: 6
[  725.347133] [drm:ironlake_check_srwm], watermark 1: display plane 26, fbc lines 3, cursor 6
[  725.347139] [drm:ironlake_check_srwm], watermark 2: display plane 52, fbc lines 4, cursor 6
[  725.347144] [drm:intel_update_fbc], 
[  725.347149] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  725.347154] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  725.347158] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  725.347161] [drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  725.398722] [drm:intel_wait_for_vblank], vblank wait timed out
[  725.398729] [drm:ironlake_update_plane], Writing base 0632D000 00000000 0 0 3200
[  725.398735] [drm:intel_update_fbc], 
[  725.450700] [drm:intel_wait_for_vblank], vblank wait timed out
[  725.450706] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 32, cursor: 6
[  725.450712] [drm:ironlake_check_srwm], watermark 1: display plane 26, fbc lines 3, cursor 6
[  725.450717] [drm:ironlake_check_srwm], watermark 2: display plane 52, fbc lines 4, cursor 6
[  725.450723] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:58:800x600]
[  725.450728] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  725.450733] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  725.450737] [drm:ironlake_write_eld], ELD on pipe A
[  725.450741] [drm:ironlake_write_eld], Audio directed to unknown port
[  725.450744] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  725.450758] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 32, cursor: 6
[  725.450762] [drm:ironlake_check_srwm], watermark 1: display plane 26, fbc lines 3, cursor 6
[  725.450767] [drm:ironlake_check_srwm], watermark 2: display plane 52, fbc lines 4, cursor 6
[  725.502631] [drm:intel_wait_for_vblank], vblank wait timed out
[  725.554611] [drm:intel_wait_for_vblank], vblank wait timed out
[  725.554922] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  725.554925] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  725.555081] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  725.555084] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  725.555087] [drm:ironlake_fdi_link_train], FDI train done
[  725.556303] [drm:intel_update_fbc], 
[  725.556609] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  725.561640] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  725.607625] [drm:intel_wait_for_vblank], vblank wait timed out
[  725.607937] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  725.608861] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  725.609684] [drm:intel_dp_start_link_train], clock recovery OK
[  725.615499] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  725.615506] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  725.615546] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  725.616484] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  725.616489] [drm:intel_crt_detect], CRT not detected via hotplug
[  725.616493] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  725.616829] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  725.616834] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  725.617148] [drm:intel_dp_detect], DPCD: 110a840101000000
[  725.618178] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  725.631905] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  725.645242] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  725.672563] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  725.672568] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  725.672572] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  725.867519] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  725.873808] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  725.878694] HDMI: available speakers: FL/FR
[  725.883595] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  730.653732] [drm:drm_mode_addfb], [FB:58]
[  730.653749] [drm:drm_mode_setcrtc], [CRTC:3]
[  730.653752] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  730.653754] [drm:drm_crtc_helper_set_config], 
[  730.653755] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:58] #connectors=1 (x y) (0 0)
[  730.653759] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  730.653761] [drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  730.653764] [drm:drm_mode_debug_printmodeline], Modeline 59:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
[  730.653767] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  730.653768] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  730.653770] [drm:drm_mode_debug_printmodeline], Modeline 59:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
[  730.653773] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  730.653775] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  730.653983] [drm:intel_dp_link_down], 
[  730.671536] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  730.676620] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  730.724396] [drm:intel_wait_for_vblank], vblank wait timed out
[  730.826395] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  730.828731] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  730.828739] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  730.828745] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  730.828752] [drm:intel_update_fbc], 
[  730.828758] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  730.828763] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  730.828769] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  730.828773] [drm:drm_mode_debug_printmodeline], Modeline 59:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
[  730.880330] [drm:intel_wait_for_vblank], vblank wait timed out
[  730.880337] [drm:ironlake_update_plane], Writing base 06502000 00000000 0 0 2880
[  730.880343] [drm:intel_update_fbc], 
[  730.932307] [drm:intel_wait_for_vblank], vblank wait timed out
[  730.932313] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  730.932318] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  730.932324] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  730.932329] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:59:720x576]
[  730.932335] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  730.932339] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  730.932344] [drm:ironlake_write_eld], ELD on pipe A
[  730.932348] [drm:ironlake_write_eld], Audio directed to unknown port
[  730.932351] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  730.932364] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  730.932369] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  730.932374] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  730.984262] [drm:intel_wait_for_vblank], vblank wait timed out
[  731.036299] [drm:intel_wait_for_vblank], vblank wait timed out
[  731.036610] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  731.036614] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  731.036771] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  731.036775] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  731.036778] [drm:ironlake_fdi_link_train], FDI train done
[  731.038003] [drm:intel_update_fbc], 
[  731.038290] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  731.043377] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  731.090240] [drm:intel_wait_for_vblank], vblank wait timed out
[  731.090551] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  731.091474] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  731.092296] [drm:intel_dp_start_link_train], clock recovery OK
[  731.098106] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  731.098111] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  731.098136] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  731.099074] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  731.099076] [drm:intel_crt_detect], CRT not detected via hotplug
[  731.099077] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  731.099411] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  731.099417] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  731.099731] [drm:intel_dp_detect], DPCD: 110a840101000000
[  731.100760] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  731.117932] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  731.127922] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  731.155139] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  731.155148] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  731.155153] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  731.349214] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  731.357784] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  731.359923] HDMI: available speakers: FL/FR
[  731.362085] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  736.131879] [drm:drm_mode_addfb], [FB:59]
[  736.131896] [drm:drm_mode_setcrtc], [CRTC:3]
[  736.131899] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  736.131901] [drm:drm_crtc_helper_set_config], 
[  736.131902] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:59] #connectors=1 (x y) (0 0)
[  736.131909] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  736.131911] [drm:drm_mode_debug_printmodeline], Modeline 59:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
[  736.131913] [drm:drm_mode_debug_printmodeline], Modeline 60:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[  736.131916] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  736.131918] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  736.131920] [drm:drm_mode_debug_printmodeline], Modeline 60:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[  736.131923] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  736.131925] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  736.132132] [drm:intel_dp_link_down], 
[  736.150209] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  736.155317] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  736.203093] [drm:intel_wait_for_vblank], vblank wait timed out
[  736.305049] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  736.307354] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  736.307360] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  736.307366] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  736.307371] [drm:intel_update_fbc], 
[  736.307376] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  736.307380] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  736.307385] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  736.307388] [drm:drm_mode_debug_printmodeline], Modeline 60:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[  736.358982] [drm:intel_wait_for_vblank], vblank wait timed out
[  736.358989] [drm:ironlake_update_plane], Writing base 06697000 00000000 0 0 2880
[  736.358994] [drm:intel_update_fbc], 
[  736.410963] [drm:intel_wait_for_vblank], vblank wait timed out
[  736.410969] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  736.410974] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  736.410979] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  736.410985] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:60:720x480]
[  736.410990] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  736.410995] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  736.410999] [drm:ironlake_write_eld], ELD on pipe A
[  736.411003] [drm:ironlake_write_eld], Audio directed to unknown port
[  736.411006] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  736.411020] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  736.411025] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  736.411030] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[  736.462982] [drm:intel_wait_for_vblank], vblank wait timed out
[  736.514959] [drm:intel_wait_for_vblank], vblank wait timed out
[  736.515270] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  736.515274] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  736.515430] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  736.515433] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  736.515436] [drm:ironlake_fdi_link_train], FDI train done
[  736.516650] [drm:intel_update_fbc], 
[  736.516954] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  736.521972] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  736.568897] [drm:intel_wait_for_vblank], vblank wait timed out
[  736.569108] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  736.570031] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  736.570850] [drm:intel_dp_start_link_train], clock recovery OK
[  736.576646] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  736.576649] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  736.576662] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  736.577591] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  736.577593] [drm:intel_crt_detect], CRT not detected via hotplug
[  736.577595] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  736.577928] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  736.577934] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  736.578249] [drm:intel_dp_detect], DPCD: 110a840101000000
[  736.579285] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  736.593218] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  736.606429] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  736.633610] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  736.633615] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  736.633620] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  736.827864] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  736.836522] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  736.838658] HDMI: available speakers: FL/FR
[  736.840810] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  741.607822] [drm:drm_mode_addfb], [FB:60]
[  741.607838] [drm:drm_mode_setcrtc], [CRTC:3]
[  741.607842] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  741.607844] [drm:drm_crtc_helper_set_config], 
[  741.607845] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:60] #connectors=1 (x y) (0 0)
[  741.607850] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  741.607852] [drm:drm_mode_debug_printmodeline], Modeline 60:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[  741.607856] [drm:drm_mode_debug_printmodeline], Modeline 61:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  741.607860] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  741.607862] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  741.607864] [drm:drm_mode_debug_printmodeline], Modeline 61:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  741.607868] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  741.607870] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  741.608078] [drm:intel_dp_link_down], 
[  741.625798] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  741.628050] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  741.678679] [drm:intel_wait_for_vblank], vblank wait timed out
[  741.780703] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  741.783007] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  741.783013] [drm:ironlake_check_srwm], watermark 1: display plane 21, fbc lines 3, cursor 6
[  741.783019] [drm:ironlake_check_srwm], watermark 2: display plane 42, fbc lines 4, cursor 6
[  741.783024] [drm:intel_update_fbc], 
[  741.783029] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  741.783033] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  741.783038] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  741.783041] [drm:drm_mode_debug_printmodeline], Modeline 61:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  741.834636] [drm:intel_wait_for_vblank], vblank wait timed out
[  741.834643] [drm:ironlake_update_plane], Writing base 067E9000 00000000 0 0 2560
[  741.834648] [drm:intel_update_fbc], 
[  741.886616] [drm:intel_wait_for_vblank], vblank wait timed out
[  741.886622] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  741.886627] [drm:ironlake_check_srwm], watermark 1: display plane 21, fbc lines 3, cursor 6
[  741.886632] [drm:ironlake_check_srwm], watermark 2: display plane 42, fbc lines 4, cursor 6
[  741.886638] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:61:640x480]
[  741.886644] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  741.886648] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  741.886652] [drm:ironlake_write_eld], ELD on pipe A
[  741.886656] [drm:ironlake_write_eld], Audio directed to unknown port
[  741.886660] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  741.886673] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  741.886678] [drm:ironlake_check_srwm], watermark 1: display plane 21, fbc lines 3, cursor 6
[  741.886683] [drm:ironlake_check_srwm], watermark 2: display plane 42, fbc lines 4, cursor 6
[  741.938594] [drm:intel_wait_for_vblank], vblank wait timed out
[  741.990614] [drm:intel_wait_for_vblank], vblank wait timed out
[  741.990924] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  741.990928] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  741.991084] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  741.991087] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  741.991090] [drm:ironlake_fdi_link_train], FDI train done
[  741.992311] [drm:intel_update_fbc], 
[  741.992610] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  741.997626] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  742.044488] [drm:intel_wait_for_vblank], vblank wait timed out
[  742.044800] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  742.045632] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  742.046455] [drm:intel_dp_start_link_train], clock recovery OK
[  742.052345] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  742.052350] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  742.052372] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  742.053313] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  742.053319] [drm:intel_crt_detect], CRT not detected via hotplug
[  742.053323] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  742.053703] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  742.053708] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  742.054022] [drm:intel_dp_detect], DPCD: 110a840101000000
[  742.055051] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  742.065526] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  742.082228] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  742.109444] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  742.109501] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  742.109505] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  742.303510] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  742.312177] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  742.314319] HDMI: available speakers: FL/FR
[  742.316476] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  747.085225] [drm:drm_mode_addfb], [FB:61]
[  747.085246] [drm:drm_mode_setcrtc], [CRTC:3]
[  747.085250] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  747.085255] [drm:drm_crtc_helper_set_config], 
[  747.085256] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:61] #connectors=1 (x y) (0 0)
[  747.085261] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  747.085263] [drm:drm_mode_debug_printmodeline], Modeline 61:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  747.085265] [drm:drm_mode_debug_printmodeline], Modeline 62:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  747.085268] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  747.085270] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  747.085272] [drm:drm_mode_debug_printmodeline], Modeline 62:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  747.085276] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  747.085278] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  747.085487] [drm:intel_dp_link_down], 
[  747.103456] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  747.108607] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  747.156359] [drm:intel_wait_for_vblank], vblank wait timed out
[  747.258356] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  747.260690] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  747.260698] [drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
[  747.260705] [drm:ironlake_check_srwm], watermark 2: display plane 36, fbc lines 3, cursor 6
[  747.260711] [drm:intel_update_fbc], 
[  747.260719] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  747.260725] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  747.260730] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  747.260734] [drm:drm_mode_debug_printmodeline], Modeline 62:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  747.312289] [drm:intel_wait_for_vblank], vblank wait timed out
[  747.312296] [drm:ironlake_update_plane], Writing base 06915000 00000000 0 0 2560
[  747.312302] [drm:intel_update_fbc], 
[  747.364266] [drm:intel_wait_for_vblank], vblank wait timed out
[  747.364272] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  747.364278] [drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
[  747.364283] [drm:ironlake_check_srwm], watermark 2: display plane 36, fbc lines 3, cursor 6
[  747.364289] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:62:640x480]
[  747.364294] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  747.364299] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  747.364304] [drm:ironlake_write_eld], ELD on pipe A
[  747.364307] [drm:ironlake_write_eld], Audio directed to unknown port
[  747.364311] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  747.364325] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  747.364329] [drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
[  747.364334] [drm:ironlake_check_srwm], watermark 2: display plane 36, fbc lines 3, cursor 6
[  747.416247] [drm:intel_wait_for_vblank], vblank wait timed out
[  747.468266] [drm:intel_wait_for_vblank], vblank wait timed out
[  747.468577] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  747.468580] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  747.468737] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  747.468740] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  747.468743] [drm:ironlake_fdi_link_train], FDI train done
[  747.469964] [drm:intel_update_fbc], 
[  747.470266] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  747.475279] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  747.522199] [drm:intel_wait_for_vblank], vblank wait timed out
[  747.522511] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  747.523434] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  747.524258] [drm:intel_dp_start_link_train], clock recovery OK
[  747.530102] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  747.530108] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  747.530187] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  747.531187] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  747.531200] [drm:intel_crt_detect], CRT not detected via hotplug
[  747.531210] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  747.531548] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  747.531555] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  747.531870] [drm:intel_dp_detect], DPCD: 110a840101000000
[  747.532902] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  747.546595] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  747.560033] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  747.587200] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  747.587206] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  747.587211] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  747.781163] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  747.790207] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  747.795109] HDMI: available speakers: FL/FR
[  747.800101] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  752.562786] [drm:drm_mode_addfb], [FB:62]
[  752.562803] [drm:drm_mode_setcrtc], [CRTC:3]
[  752.562807] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  752.562808] [drm:drm_crtc_helper_set_config], 
[  752.562810] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
[  752.562814] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  752.562816] [drm:drm_mode_debug_printmodeline], Modeline 62:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  752.562820] [drm:drm_mode_debug_printmodeline], Modeline 63:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[  752.562824] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  752.562826] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  752.562828] [drm:drm_mode_debug_printmodeline], Modeline 63:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[  752.562832] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  752.562834] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  752.563042] [drm:intel_dp_link_down], 
[  752.581179] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  752.586277] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  752.634011] [drm:intel_wait_for_vblank], vblank wait timed out
[  752.736009] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  752.738343] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  752.738351] [drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
[  752.738357] [drm:ironlake_check_srwm], watermark 2: display plane 36, fbc lines 3, cursor 6
[  752.738363] [drm:intel_update_fbc], 
[  752.738370] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  752.738375] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  752.738381] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  752.738385] [drm:drm_mode_debug_printmodeline], Modeline 63:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[  752.789941] [drm:intel_wait_for_vblank], vblank wait timed out
[  752.789948] [drm:ironlake_update_plane], Writing base 06A41000 00000000 0 0 2560
[  752.789954] [drm:intel_update_fbc], 
[  752.841896] [drm:intel_wait_for_vblank], vblank wait timed out
[  752.841903] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  752.841910] [drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
[  752.841916] [drm:ironlake_check_srwm], watermark 2: display plane 36, fbc lines 3, cursor 6
[  752.841923] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:63:640x480]
[  752.841929] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  752.841934] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  752.841940] [drm:ironlake_write_eld], ELD on pipe A
[  752.841944] [drm:ironlake_write_eld], Audio directed to unknown port
[  752.841948] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  752.841962] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 52, cursor: 6
[  752.841968] [drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
[  752.841974] [drm:ironlake_check_srwm], watermark 2: display plane 36, fbc lines 3, cursor 6
[  752.893873] [drm:intel_wait_for_vblank], vblank wait timed out
[  752.945910] [drm:intel_wait_for_vblank], vblank wait timed out
[  752.946222] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  752.946226] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  752.946383] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  752.946387] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  752.946391] [drm:ironlake_fdi_link_train], FDI train done
[  752.947616] [drm:intel_update_fbc], 
[  752.947887] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  752.952933] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  752.999842] [drm:intel_wait_for_vblank], vblank wait timed out
[  753.000154] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  753.001079] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  753.001903] [drm:intel_dp_start_link_train], clock recovery OK
[  753.007714] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  753.007720] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  753.007796] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  753.008737] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  753.008739] [drm:intel_crt_detect], CRT not detected via hotplug
[  753.008741] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  753.009071] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  753.009073] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  753.009383] [drm:intel_dp_detect], DPCD: 110a840101000000
[  753.010408] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  753.024222] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  753.037526] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  753.064816] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  753.064818] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  753.064820] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  753.258809] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  753.267778] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  753.269921] HDMI: available speakers: FL/FR
[  753.272026] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  758.037486] [drm:drm_mode_addfb], [FB:63]
[  758.037501] [drm:drm_mode_setcrtc], [CRTC:3]
[  758.037504] [drm:drm_mode_setcrtc], [CONNECTOR:11:DP-1]
[  758.037506] [drm:drm_crtc_helper_set_config], 
[  758.037507] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:63] #connectors=1 (x y) (0 0)
[  758.037512] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  758.037514] [drm:drm_mode_debug_printmodeline], Modeline 63:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[  758.037517] [drm:drm_mode_debug_printmodeline], Modeline 64:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  758.037521] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  758.037523] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  758.037525] [drm:drm_mode_debug_printmodeline], Modeline 64:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  758.037532] [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 1 clock 162000
[  758.037535] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  758.037743] [drm:intel_dp_link_down], 
[  758.055770] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  758.060850] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  758.108666] [drm:intel_wait_for_vblank], vblank wait timed out
[  758.210621] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  758.213001] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  758.213009] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  758.213015] [drm:ironlake_check_srwm], watermark 2: display plane 40, fbc lines 3, cursor 6
[  758.213021] [drm:intel_update_fbc], 
[  758.213028] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  758.213033] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  758.213039] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  758.213043] [drm:drm_mode_debug_printmodeline], Modeline 64:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  758.264640] [drm:intel_wait_for_vblank], vblank wait timed out
[  758.264647] [drm:ironlake_update_plane], Writing base 06B6D000 00000000 0 0 2880
[  758.264653] [drm:intel_update_fbc], 
[  758.316618] [drm:intel_wait_for_vblank], vblank wait timed out
[  758.316624] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  758.316629] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  758.316634] [drm:ironlake_check_srwm], watermark 2: display plane 40, fbc lines 3, cursor 6
[  758.316640] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:64:720x400]
[  758.316646] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  758.316650] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  758.316655] [drm:ironlake_write_eld], ELD on pipe A
[  758.316658] [drm:ironlake_write_eld], Audio directed to unknown port
[  758.316662] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  758.316676] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 42, cursor: 6
[  758.316680] [drm:ironlake_check_srwm], watermark 1: display plane 19, fbc lines 3, cursor 6
[  758.316685] [drm:ironlake_check_srwm], watermark 2: display plane 40, fbc lines 3, cursor 6
[  758.368551] [drm:intel_wait_for_vblank], vblank wait timed out
[  758.420531] [drm:intel_wait_for_vblank], vblank wait timed out
[  758.420842] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  758.420845] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  758.421001] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  758.421005] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  758.421007] [drm:ironlake_fdi_link_train], FDI train done
[  758.422223] [drm:intel_update_fbc], 
[  758.422514] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  758.424817] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  758.473508] [drm:intel_wait_for_vblank], vblank wait timed out
[  758.473719] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  758.474657] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  758.475482] [drm:intel_dp_start_link_train], clock recovery OK
[  758.481297] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  758.481304] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  758.481328] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  758.482279] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[  758.482286] [drm:intel_crt_detect], CRT not detected via hotplug
[  758.482290] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[  758.482627] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  758.482633] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[  758.482947] [drm:intel_dp_detect], DPCD: 110a840101000000
[  758.483978] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  758.495391] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  758.511055] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  758.538281] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  758.538286] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[  758.538291] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 1 to 1
[  758.727472] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  758.736062] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  758.738209] HDMI: available speakers: FL/FR
[  758.740299] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  763.479349] [drm:drm_crtc_helper_set_config], 
[  763.479353] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[  763.479570] [drm:intel_dp_link_down], 
[  763.497477] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  763.498356] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[  763.498363] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[  763.502271] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  763.549331] [drm:intel_wait_for_vblank], vblank wait timed out
[  763.651332] [drm:intel_wait_for_pipe_off], pipe_off wait timed out
[  763.653666] [drm:intel_update_fbc], 
[  763.653678] [drm:drm_mode_setcrtc], [CRTC:3]
[  763.653683] [drm:drm_mode_setcrtc], Count connectors is 1 but no mode or fb set
[  763.713992] [drm:drm_crtc_helper_set_config], 
[  763.713994] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=1 (x y) (0 0)
[  763.713999] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[  763.714001] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[  763.714002] [drm:drm_mode_debug_printmodeline], Modeline 64:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  763.714005] [drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[  763.714008] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[  763.714010] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[  763.714011] [drm:drm_crtc_helper_set_config], [CONNECTOR:11:DP-1] to [CRTC:3]
[  763.714013] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[  763.714014] [drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[  763.714020] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
[  763.714022] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[  763.714243] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
[  763.714249] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[  763.714255] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[  763.714258] [drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[  763.766215] [drm:intel_wait_for_vblank], vblank wait timed out
[  763.766223] [drm:ironlake_update_plane], Writing base 00043000 00000000 0 0 7680
[  763.766230] [drm:intel_update_fbc], 
[  763.766235] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[  763.766241] [drm:ironlake_check_srwm], watermark 1: display plane 94, fbc lines 3, cursor 6
[  763.766247] [drm:ironlake_check_srwm], watermark 2: display plane 209, fbc lines 4, cursor 10
[  763.766254] [drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:15:1920x1200]
[  763.766261] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[  763.766267] [drm:intel_write_eld], ELD on [CONNECTOR:11:DP-1], [ENCODER:12:TMDS-12]
[  763.766273] [drm:ironlake_write_eld], ELD on pipe A
[  763.766277] [drm:ironlake_write_eld], Audio directed to unknown port
[  763.766281] [drm:ironlake_write_eld], ELD: DisplayPort detected
[  763.766295] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[  763.766301] [drm:ironlake_check_srwm], watermark 1: display plane 94, fbc lines 3, cursor 6
[  763.766307] [drm:ironlake_check_srwm], watermark 2: display plane 209, fbc lines 4, cursor 10
[  763.818218] [drm:intel_wait_for_vblank], vblank wait timed out
[  763.870196] [drm:intel_wait_for_vblank], vblank wait timed out
[  763.870507] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[  763.870510] [drm:ironlake_fdi_link_train], FDI train 1 done.
[  763.870666] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[  763.870669] [drm:ironlake_fdi_link_train], FDI train 2 done.
[  763.870672] [drm:ironlake_fdi_link_train], FDI train done
[  763.871895] [drm:intel_update_fbc], 
[  763.872198] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  763.877238] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  763.923207] [drm:intel_wait_for_vblank], vblank wait timed out
[  763.923519] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[  763.924445] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
[  763.925270] [drm:intel_dp_start_link_train], clock recovery OK
[  763.931073] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[  763.931079] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:11:DP-1] set DPMS on
[  763.931092] [drm:drm_crtc_helper_set_config], 
[  763.931095] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[  763.947610] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[  764.183141] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[  764.191805] HDMI: detected monitor DELL U2410 at connection type DisplayPort
[  764.193967] HDMI: available speakers: FL/FR
[  764.196156] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24