[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.0-rc3 (peter@asterope.colberg.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 SMP Wed Apr 18 23:26:42 EDT 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.4.0-rc3 root=/dev/mapper/vg-root ro pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.debug=0xe [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 00000000da99f000 (usable) [ 0.000000] BIOS-e820: 00000000da99f000 - 00000000dae9f000 (reserved) [ 0.000000] BIOS-e820: 00000000dae9f000 - 00000000daf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000daf9f000 - 00000000dafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dafff000 - 00000000db000000 (usable) [ 0.000000] BIOS-e820: 00000000db000000 - 00000000dfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd20000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000021e600000 (usable) [ 0.000000] BIOS-e820: 000000021e600000 - 000000021e800000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: LENOVO 4286CTO/4286CTO, BIOS 8DET54WW (1.24 ) 10/18/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x21e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask FE0000000 write-back [ 0.000000] 8 base 21F000000 mask FFF000000 uncachable [ 0.000000] 9 base 21E800000 mask FFF800000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000 [ 0.000000] 0000000000 - 00db000000 page 2M [ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000021e600000 [ 0.000000] 0100000000 - 021e600000 page 2M [ 0.000000] kernel direct mapping tables up to 21e600000 @ da995000-da99f000 [ 0.000000] RAMDISK: 36800000 - 373f8000 [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000daffe120 000AC (v01 LENOVO TP-8D 00001240 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafe7000 000F4 (v04 LENOVO TP-8D 00001240 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000dafea000 0F6A7 (v01 LENOVO TP-8D 00001240 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf2d000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8D 00001240 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffa000 007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 00000000dafe6000 00038 (v01 LENOVO TP-8D 00001240 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafe5000 00098 (v01 LENOVO TP-8D 00001240 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafe4000 0003C (v01 LENOVO TP-8D 00001240 PTL 00000002) [ 0.000000] ACPI: ECDT 00000000dafe3000 00052 (v01 LENOVO TP-8D 00001240 PTL 00000002) [ 0.000000] ACPI: ASF! 00000000dafe9000 000A5 (v32 LENOVO TP-8D 00001240 PTL 00000002) [ 0.000000] ACPI: TCPA 00000000dafe2000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 00000000dafe1000 00AAB (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafe0000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 00000000dafdf000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafde000 0003E (v01 LENOVO TP-8D 00001240 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafdc000 00292 (v01 LENOVO TP-8D 00001240 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000021e600000 [ 0.000000] Initmem setup node 0 0000000000000000-000000021e600000 [ 0.000000] NODE_DATA [000000021e5fc000 - 000000021e5fffff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880215c00000-ffff88021cdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0021e600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000da99f [ 0.000000] 0: 0x000dafff -> 0x000db000 [ 0.000000] 0: 0x00100000 -> 0x0021e600 [ 0.000000] On node 0 totalpages: 2067245 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 875992 pages, LIFO batch:31 [ 0.000000] Normal zone: 16037 pages used for memmap [ 0.000000] Normal zone: 1156955 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000da99f000 - 00000000dae9f000 [ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000 [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd20000 [ 0.000000] PM: Registered nosave memory: 00000000ffd20000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021e200000 s82304 r8192 d24192 u262144 [ 0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036867 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.4.0-rc3 root=/dev/mapper/vg-root ro pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.debug=0xe [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8064456k/8886272k available (3579k kernel code, 617292k absent, 204524k reserved, 3114k data, 604k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2791.051 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5582.10 BogoMIPS (lpj=11164204) [ 0.000118] pid_max: default: 32768 minimum: 301 [ 0.000208] Security Framework initialized [ 0.000265] AppArmor: AppArmor disabled by boot time parameter [ 0.000716] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002210] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002890] Mount-cache hash table entries: 256 [ 0.003118] Initializing cgroup subsys cpuacct [ 0.003174] Initializing cgroup subsys memory [ 0.003241] Initializing cgroup subsys devices [ 0.003297] Initializing cgroup subsys freezer [ 0.003354] Initializing cgroup subsys net_cls [ 0.003410] Initializing cgroup subsys blkio [ 0.003471] Initializing cgroup subsys perf_event [ 0.003551] Disabled fast string operations [ 0.003606] CPU: Physical Processor ID: 0 [ 0.003661] CPU: Processor Core ID: 0 [ 0.003718] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003718] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003834] mce: CPU supports 7 MCE banks [ 0.003897] CPU0: Thermal monitoring enabled (TM1) [ 0.003959] using mwait in idle threads. [ 0.004998] ACPI: Core revision 20120320 [ 0.021982] DMAR: Host address width 36 [ 0.022039] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.022102] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.022174] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.023549] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.023621] DMAR: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff [ 0.023681] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.023809] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.023868] HPET id 0 under DRHD base 0xfed91000 [ 0.023925] HPET id 0 under DRHD base 0xfed91000 [ 0.023981] HPET id 0 under DRHD base 0xfed91000 [ 0.024039] HPET id 0 under DRHD base 0xfed91000 [ 0.024096] HPET id 0 under DRHD base 0xfed91000 [ 0.024152] HPET id 0 under DRHD base 0xfed91000 [ 0.024209] HPET id 0 under DRHD base 0xfed91000 [ 0.024266] HPET id 0 under DRHD base 0xfed91000 [ 0.024564] Enabled IRQ remapping in x2apic mode [ 0.024622] Enabling x2apic [ 0.024676] Enabled x2apic [ 0.024733] Switched APIC routing to cluster x2apic. [ 0.025219] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064865] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07 [ 0.172477] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.172709] PEBS disabled due to CPU errata. [ 0.172766] ... version: 3 [ 0.172822] ... bit width: 48 [ 0.172879] ... generic registers: 4 [ 0.172935] ... value mask: 0000ffffffffffff [ 0.172993] ... max period: 000000007fffffff [ 0.173051] ... fixed-purpose events: 3 [ 0.173106] ... event mask: 000000070000000f [ 0.173478] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.173627] Booting Node 0, Processors #1 [ 0.184621] Disabled fast string operations [ 0.186729] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.186985] #2 [ 0.197934] Disabled fast string operations [ 0.200038] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.200291] #3 [ 0.211240] Disabled fast string operations [ 0.213347] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.213534] Brought up 4 CPUs [ 0.213590] Total of 4 processors activated (22328.40 BogoMIPS). [ 0.216902] devtmpfs: initialized [ 0.219782] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) [ 0.219965] dummy: [ 0.220070] NET: Registered protocol family 16 [ 0.220269] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.220342] ACPI: bus type pci registered [ 0.220630] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.220706] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.226098] PCI: Using configuration type 1 for base access [ 0.226887] bio: create slab at 0 [ 0.227013] ACPI: Added _OSI(Module Device) [ 0.227070] ACPI: Added _OSI(Processor Device) [ 0.227127] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.227184] ACPI: Added _OSI(Processor Aggregator Device) [ 0.228410] ACPI: EC: EC description table is found, configuring boot EC [ 0.233286] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.236038] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.236496] ACPI: Dynamic OEM Table Load: [ 0.236630] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.237039] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.237529] ACPI: Dynamic OEM Table Load: [ 0.237663] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.237926] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.238370] ACPI: Dynamic OEM Table Load: [ 0.238503] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.239227] ACPI: Interpreter enabled [ 0.239285] ACPI: (supports S0 S3 S4 S5) [ 0.239513] ACPI: Using IOAPIC for interrupt routing [ 0.242278] ACPI: Power Resource [PUBS] (on) [ 0.245235] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.246361] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.246422] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.246601] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.246679] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.246740] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.246801] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.246874] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfebfffff] [ 0.246946] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] [ 0.247046] PCI host bridge to bus 0000:00 [ 0.247103] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.247163] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.247223] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.247284] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff] [ 0.247346] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] [ 0.247414] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.247447] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.247456] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.247461] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.247465] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] [ 0.247514] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.247536] pci 0000:00:16.0: reg 10: [mem 0xf2625000-0xf262500f 64bit] [ 0.247610] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.247641] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.247659] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff] [ 0.247667] pci 0000:00:19.0: reg 14: [mem 0xf262b000-0xf262bfff] [ 0.247675] pci 0000:00:19.0: reg 18: [io 0x5080-0x509f] [ 0.247736] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.247762] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.247782] pci 0000:00:1a.0: reg 10: [mem 0xf262a000-0xf262a3ff] [ 0.247868] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.247895] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.247913] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit] [ 0.247978] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.248003] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.248078] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.248104] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.248179] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.248206] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.248280] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.248306] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.248381] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.248407] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.248482] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.248513] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.248533] pci 0000:00:1d.0: reg 10: [mem 0xf2629000-0xf26293ff] [ 0.248619] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.248646] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 0.248767] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.248784] pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af] [ 0.248792] pci 0000:00:1f.2: reg 14: [io 0x50b4-0x50b7] [ 0.248799] pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7] [ 0.248807] pci 0000:00:1f.2: reg 1c: [io 0x50b0-0x50b3] [ 0.248815] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] [ 0.248822] pci 0000:00:1f.2: reg 24: [mem 0xf2628000-0xf26287ff] [ 0.248865] pci 0000:00:1f.2: PME# supported from D3hot [ 0.248884] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.248899] pci 0000:00:1f.3: reg 10: [mem 0xf2624000-0xf26240ff 64bit] [ 0.248919] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.248986] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.249132] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000 [ 0.249175] pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit] [ 0.249388] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.259915] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.260010] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 0.260057] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.260117] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.260121] pci 0000:00:1c.3: bridge window [mem 0xf1d00000-0xf24fffff] [ 0.260128] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.260373] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001 [ 0.260391] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 0.260675] pci 0000:0d:00.0: reg 10: [mem 0xf1500000-0xf15000ff] [ 0.260866] pci 0000:0d:00.0: supports D1 D2 [ 0.260868] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.272121] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.272180] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.272184] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf1cfffff] [ 0.272190] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.272260] pci 0000:0e:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.272285] pci 0000:0e:00.0: reg 10: [mem 0xf1400000-0xf1401fff 64bit] [ 0.272415] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold [ 0.283844] pci 0000:00:1c.6: PCI bridge to [bus 0e-0e] [ 0.283943] pci 0000:00:1c.6: bridge window [mem 0xf1400000-0xf14fffff] [ 0.283971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.284071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.284098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.284124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.284153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.284183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP7._PRT] [ 0.284309] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.284529] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.284603] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.286959] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.287459] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.287961] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11) [ 0.288458] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11) [ 0.288955] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) [ 0.289444] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.290032] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.290529] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11) [ 0.291054] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.291132] vgaarb: loaded [ 0.291186] vgaarb: bridge control possible 0000:00:02.0 [ 0.291272] PCI: Using ACPI for IRQ routing [ 0.292787] PCI: pci_cache_line_size set to 64 bytes [ 0.293206] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.293209] reserve RAM buffer: 00000000da99f000 - 00000000dbffffff [ 0.293211] reserve RAM buffer: 00000000db000000 - 00000000dbffffff [ 0.293212] reserve RAM buffer: 000000021e600000 - 000000021fffffff [ 0.293334] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.293745] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.295812] Switching to clocksource hpet [ 0.297131] pnp: PnP ACPI init [ 0.297198] ACPI: bus type pnp registered [ 0.297585] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.297587] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.297588] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.297590] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.297593] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.297594] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.297596] pnp 00:00: [mem 0x000d4000-0x000d7fff] [ 0.297597] pnp 00:00: [mem 0x000d8000-0x000dbfff] [ 0.297598] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 0.297600] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.297601] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.297602] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.297604] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.297605] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.297606] pnp 00:00: [mem 0x00100000-0xdf9fffff] [ 0.297608] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.297609] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.297648] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.297709] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.297771] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.297831] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.297892] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.297953] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.298014] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.298075] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.298135] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.298196] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.298258] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.298319] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.298381] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.298444] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.298506] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.298567] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.298628] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.298690] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.298705] pnp 00:01: [bus 00-fe] [ 0.298707] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.298708] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.298710] pnp 00:01: [io 0x0d00-0xffff window] [ 0.298712] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.298713] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.298715] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.298716] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.298717] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.298719] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.298720] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.298722] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.298723] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.298725] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.298726] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.298728] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.298729] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.298731] pnp 00:01: [mem 0xdfa00000-0xfebfffff window] [ 0.298733] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.298765] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.298814] pnp 00:02: [io 0x0010-0x001f] [ 0.298816] pnp 00:02: [io 0x0090-0x009f] [ 0.298817] pnp 00:02: [io 0x0024-0x0025] [ 0.298818] pnp 00:02: [io 0x0028-0x0029] [ 0.298819] pnp 00:02: [io 0x002c-0x002d] [ 0.298821] pnp 00:02: [io 0x0030-0x0031] [ 0.298822] pnp 00:02: [io 0x0034-0x0035] [ 0.298823] pnp 00:02: [io 0x0038-0x0039] [ 0.298824] pnp 00:02: [io 0x003c-0x003d] [ 0.298826] pnp 00:02: [io 0x00a4-0x00a5] [ 0.298827] pnp 00:02: [io 0x00a8-0x00a9] [ 0.298828] pnp 00:02: [io 0x00ac-0x00ad] [ 0.298829] pnp 00:02: [io 0x00b0-0x00b5] [ 0.298830] pnp 00:02: [io 0x00b8-0x00b9] [ 0.298832] pnp 00:02: [io 0x00bc-0x00bd] [ 0.298833] pnp 00:02: [io 0x0050-0x0053] [ 0.298834] pnp 00:02: [io 0x0072-0x0077] [ 0.298835] pnp 00:02: [io 0x0400-0x047f] [ 0.298837] pnp 00:02: [io 0x0500-0x057f] [ 0.298838] pnp 00:02: [io 0x0800-0x080f] [ 0.298839] pnp 00:02: [io 0x15e0-0x15ef] [ 0.298840] pnp 00:02: [io 0x1600-0x167f] [ 0.298842] pnp 00:02: [mem 0xf8000000-0xfbffffff] [ 0.298843] pnp 00:02: [mem 0x00000000-0x00000fff] [ 0.298845] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.298846] pnp 00:02: [mem 0xfed10000-0xfed13fff] [ 0.298847] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.298849] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.298851] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.298896] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.298955] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.299015] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.299075] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.299134] system 00:02: [io 0x1600-0x167f] has been reserved [ 0.299195] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.299255] system 00:02: [mem 0x00000000-0x00000fff] could not be reserved [ 0.299317] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.299378] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.299438] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.299498] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.299559] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.299620] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.299656] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.299678] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.299686] pnp 00:04: [io 0x0000-0x000f] [ 0.299687] pnp 00:04: [io 0x0080-0x008f] [ 0.299688] pnp 00:04: [io 0x00c0-0x00df] [ 0.299690] pnp 00:04: [dma 4] [ 0.299710] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.299716] pnp 00:05: [io 0x0061] [ 0.299736] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.299744] pnp 00:06: [io 0x00f0] [ 0.299753] pnp 00:06: [irq 13] [ 0.299782] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.299789] pnp 00:07: [io 0x0070-0x0071] [ 0.299795] pnp 00:07: [irq 8] [ 0.299816] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.299824] pnp 00:08: [io 0x0060] [ 0.299825] pnp 00:08: [io 0x0064] [ 0.299830] pnp 00:08: [irq 1] [ 0.299851] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.299867] pnp 00:09: [irq 12] [ 0.299893] pnp 00:09: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active) [ 0.299923] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.299946] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.300407] pnp: PnP ACPI: found 11 devices [ 0.300464] ACPI: ACPI bus type pnp unregistered [ 0.306741] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.306808] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.306868] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 0.306935] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.306994] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.307057] pci 0000:00:1c.3: bridge window [mem 0xf1d00000-0xf24fffff] [ 0.307120] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.307197] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.307256] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.307318] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf1cfffff] [ 0.307380] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.307456] pci 0000:00:1c.6: PCI bridge to [bus 0e-0e] [ 0.307518] pci 0000:00:1c.6: bridge window [mem 0xf1400000-0xf14fffff] [ 0.307628] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.307630] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.307631] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.307633] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff] [ 0.307634] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] [ 0.307636] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff] [ 0.307638] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.307639] pci_bus 0000:05: resource 1 [mem 0xf1d00000-0xf24fffff] [ 0.307641] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.307642] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.307644] pci_bus 0000:0d: resource 1 [mem 0xf1500000-0xf1cfffff] [ 0.307645] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.307647] pci_bus 0000:0e: resource 1 [mem 0xf1400000-0xf14fffff] [ 0.307718] NET: Registered protocol family 2 [ 0.307943] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.309395] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.310526] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.310705] TCP: Hash tables configured (established 524288 bind 65536) [ 0.312093] TCP: reno registered [ 0.312159] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.312244] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.312416] NET: Registered protocol family 1 [ 0.312483] pci 0000:00:02.0: Boot video device [ 0.312498] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.312559] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.312667] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.312728] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.313069] PCI: CLS 64 bytes, default 64 [ 0.313101] Unpacking initramfs... [ 0.550884] Freeing initrd memory: 12256k freed [ 0.552702] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.552765] Placing 64MB software IO TLB between ffff8800d6995000 - ffff8800da995000 [ 0.552838] software IO TLB at phys 0xd6995000 - 0xda995000 [ 0.553400] audit: initializing netlink socket (disabled) [ 0.553470] type=2000 audit(1334857163.436:1): initialized [ 0.563998] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.564712] VFS: Disk quotas dquot_6.5.2 [ 0.564789] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.564910] msgmni has been set to 15774 [ 0.565085] alg: No test for stdrng (krng) [ 0.565165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.565238] io scheduler noop registered [ 0.565295] io scheduler deadline registered [ 0.565365] io scheduler cfq registered (default) [ 0.565693] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.565770] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.565830] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.566034] acpiphp: Slot [1] registered [ 0.566171] intel_idle: MWAIT substates: 0x21120 [ 0.566173] intel_idle: v0.4 model 0x2A [ 0.566174] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.566199] GHES: HEST is not enabled! [ 0.566297] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.566720] Linux agpgart interface v0.103 [ 0.566832] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 0.566955] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.568028] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.568185] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.568334] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.571355] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.571420] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.571573] mousedev: PS/2 mouse device common for all mice [ 0.571669] rtc_cmos 00:07: RTC can wake from S4 [ 0.571842] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.571934] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.572073] cpuidle: using governor ladder [ 0.572221] cpuidle: using governor menu [ 0.572393] TCP: cubic registered [ 0.572531] NET: Registered protocol family 10 [ 0.572862] Mobile IPv6 [ 0.572916] NET: Registered protocol family 17 [ 0.572975] Registering the dns_resolver key type [ 0.573184] PM: Hibernation image not present or could not be loaded. [ 0.573194] registered taskstats version 1 [ 0.573905] rtc_cmos 00:07: setting system clock to 2012-04-19 17:39:24 UTC (1334857164) [ 0.574056] Initializing network drop monitor service [ 0.574929] Freeing unused kernel memory: 604k freed [ 0.575065] Write protecting the kernel read-only data: 6144k [ 0.575564] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.576508] Freeing unused kernel memory: 500k freed [ 0.578248] Freeing unused kernel memory: 720k freed [ 0.636846] usbcore: registered new interface driver usbfs [ 0.636940] usbcore: registered new interface driver hub [ 0.637113] e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k [ 0.637176] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 0.637284] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.637401] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 0.642311] SCSI subsystem initialized [ 0.643491] usbcore: registered new device driver usb [ 0.644119] xhci_hcd 0000:0e:00.0: xHCI Host Controller [ 0.644204] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 1 [ 0.644471] xhci_hcd 0000:0e:00.0: irq 18, io mem 0xf1400000 [ 0.644609] xhci_hcd 0000:0e:00.0: irq 43 for MSI/MSI-X [ 0.644617] xhci_hcd 0000:0e:00.0: irq 44 for MSI/MSI-X [ 0.644624] xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X [ 0.644630] xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X [ 0.644637] xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X [ 0.644787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.644852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.644927] usb usb1: Product: xHCI Host Controller [ 0.644988] usb usb1: Manufacturer: Linux 3.4.0-rc3 xhci_hcd [ 0.645051] usb usb1: SerialNumber: 0000:0e:00.0 [ 0.645286] xHCI xhci_add_endpoint called for root hub [ 0.645289] xHCI xhci_check_bandwidth called for root hub [ 0.645325] hub 1-0:1.0: USB hub found [ 0.645390] hub 1-0:1.0: 2 ports detected [ 0.645522] xhci_hcd 0000:0e:00.0: xHCI Host Controller [ 0.645588] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 2 [ 0.650076] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.650224] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.650291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.650367] usb usb2: Product: xHCI Host Controller [ 0.650427] usb usb2: Manufacturer: Linux 3.4.0-rc3 xhci_hcd [ 0.650488] usb usb2: SerialNumber: 0000:0e:00.0 [ 0.650636] xHCI xhci_add_endpoint called for root hub [ 0.650638] xHCI xhci_check_bandwidth called for root hub [ 0.650676] hub 2-0:1.0: USB hub found [ 0.650744] hub 2-0:1.0: 2 ports detected [ 0.652672] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.652737] ACPI: Thermal Zone [THM0] (65 C) [ 0.654549] libata version 3.00 loaded. [ 0.659483] sdhci: Secure Digital Host Controller Interface driver [ 0.659552] sdhci: Copyright(c) Pierre Ossman [ 0.659871] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4) [ 0.660137] mmc0: no vmmc regulator found [ 0.660412] Registered led device: mmc0:: [ 0.661661] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 0.664037] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.887997] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:9f:be:94 [ 0.888075] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 0.888187] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 0.888276] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 0.888347] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 0.888444] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.888447] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.888519] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.888625] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.892557] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.892564] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf262a000 [ 0.902471] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.902767] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.902841] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902921] usb usb3: Product: EHCI Host Controller [ 0.902978] usb usb3: Manufacturer: Linux 3.4.0-rc3 ehci_hcd [ 0.903036] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.903307] hub 3-0:1.0: USB hub found [ 0.903371] hub 3-0:1.0: 3 ports detected [ 0.903492] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.903572] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.903694] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.903697] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.903761] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.903860] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.907777] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.907794] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2629000 [ 0.918430] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.918536] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.918615] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.918688] usb usb4: Product: EHCI Host Controller [ 0.918745] usb usb4: Manufacturer: Linux 3.4.0-rc3 ehci_hcd [ 0.918803] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.919069] hub 4-0:1.0: USB hub found [ 0.919130] hub 4-0:1.0: 3 ports detected [ 0.919259] ahci 0000:00:1f.2: version 3.0 [ 0.919327] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X [ 0.919419] ahci: SSS flag set, parallel bus scan disabled [ 0.934431] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode [ 0.934509] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.934588] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.942960] scsi0 : ahci [ 0.943185] scsi1 : ahci [ 0.943350] scsi2 : ahci [ 0.943514] scsi3 : ahci [ 0.943674] scsi4 : ahci [ 0.943801] scsi5 : ahci [ 0.944411] ata1: SATA max UDMA/133 abar m2048@0xf2628000 port 0xf2628100 irq 48 [ 0.944483] ata2: DUMMY [ 0.944536] ata3: DUMMY [ 0.944589] ata4: DUMMY [ 0.944644] ata5: SATA max UDMA/133 abar m2048@0xf2628000 port 0xf2628300 irq 48 [ 0.944716] ata6: DUMMY [ 1.213718] usb 3-1: new high-speed USB device number 2 using ehci_hcd [ 1.261601] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.262192] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.262195] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.262269] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.262727] ata1.00: ATA-8: INTEL SSDSA2BW160G3L, 4PC1LE04, max UDMA/133 [ 1.262805] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.263522] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.263525] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.263599] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.264068] ata1.00: configured for UDMA/133 [ 1.264261] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2BW16 4PC1 PQ: 0 ANSI: 5 [ 1.346332] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.346392] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.346815] hub 3-1:1.0: USB hub found [ 1.347044] hub 3-1:1.0: 6 ports detected [ 1.457141] usb 4-1: new high-speed USB device number 2 using ehci_hcd [ 1.548867] Refined TSC clocksource calibration: 2790.935 MHz. [ 1.550260] Switching to clocksource tsc [ 1.580808] ata5: SATA link down (SStatus 0 SControl 300) [ 1.584280] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.584424] sd 0:0:0:0: [sda] Write Protect is off [ 1.584484] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.584500] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.585696] sda: unknown partition table [ 1.586060] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.589082] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.589145] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.589503] hub 4-1:1.0: USB hub found [ 1.589698] hub 4-1:1.0: 8 ports detected [ 1.623795] device-mapper: uevent: version 1.0.3 [ 1.623910] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.860350] usb 4-1.2: new high-speed USB device number 3 using ehci_hcd [ 1.953992] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0610 [ 1.954002] usb 4-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.954008] usb 4-1.2: Product: USB2.0 Hub [ 1.954470] hub 4-1.2:1.0: USB hub found [ 1.954862] hub 4-1.2:1.0: 4 ports detected [ 2.227578] usb 4-1.2.3: new high-speed USB device number 4 using ehci_hcd [ 2.322866] usb 4-1.2.3: New USB device found, idVendor=054c, idProduct=02a5 [ 2.322905] usb 4-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.322914] usb 4-1.2.3: Product: Storage Media [ 2.322929] usb 4-1.2.3: Manufacturer: Sony [ 2.322931] usb 4-1.2.3: SerialNumber: AC2006081601778 [ 2.324780] usbcore: registered new interface driver uas [ 2.325407] Initializing USB Mass Storage driver... [ 2.325512] scsi6 : usb-storage 4-1.2.3:1.0 [ 2.325571] usbcore: registered new interface driver usb-storage [ 2.325573] USB Mass Storage support registered. [ 2.395193] usb 4-1.2.4: new low-speed USB device number 5 using ehci_hcd [ 2.495843] usb 4-1.2.4: New USB device found, idVendor=17ef, idProduct=6009 [ 2.495853] usb 4-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.495859] usb 4-1.2.4: Product: ThinkPad USB Keyboard with TrackPoint [ 2.495865] usb 4-1.2.4: Manufacturer: Lite-On Technology Corp. [ 2.502102] input: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.4/4-1.2.4:1.0/input/input1 [ 2.502151] generic-usb 0003:17EF:6009.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.2.4/input0 [ 2.511385] input: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.4/4-1.2.4:1.1/input/input2 [ 2.511624] generic-usb 0003:17EF:6009.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.2.4/input1 [ 2.511651] usbcore: registered new interface driver usbhid [ 2.511653] usbhid: USB HID core driver [ 3.321989] scsi 6:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS [ 3.324309] sd 6:0:0:0: [sdb] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [ 3.325296] sd 6:0:0:0: [sdb] Write Protect is off [ 3.325299] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.326275] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.326277] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.330265] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.330267] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.400628] sdb: sdb1 [ 3.403709] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.403711] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.403713] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 8.043470] alg: No test for __cbc-aes-aesni (cryptd(__driver-cbc-aes-aesni)) [ 8.124167] fstype: sending ioctl 540f to a partition! [ 8.179576] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 8.419418] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 8.420093] ACPI: Lid Switch [LID] [ 8.420220] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 8.420298] ACPI: Sleep Button [SLPB] [ 8.420430] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 8.420505] ACPI: Power Button [PWRF] [ 8.420641] ACPI: Requesting acpi_cpufreq [ 8.424623] wmi: Mapper loaded [ 8.443681] [drm] Initialized drm 1.1.0 20060810 [ 8.445033] iTCO_vendor_support: vendor-support=0 [ 8.446674] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 8.446854] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 8.446990] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.460000] cfg80211: Calling CRDA to update world regulatory domain [ 8.461039] ACPI: Battery Slot [BAT0] (battery present) [ 8.463222] ACPI: AC Adapter [AC] (on-line) [ 8.464624] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78) [ 8.473005] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b [ 8.474105] i915 0000:00:02.0: power state changed by ACPI to D0 [ 8.474167] i915 0000:00:02.0: power state changed by ACPI to D0 [ 8.474456] i915 0000:00:02.0: setting latency timer to 64 [ 8.481558] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 8.481613] Copyright(c) 2003-2012 Intel Corporation [ 8.481735] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [ 8.481787] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005894000 [ 8.481841] iwlwifi 0000:03:00.0: HW Revision ID = 0x3E [ 8.481976] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X [ 8.484979] Non-volatile memory driver v1.3 [ 8.487572] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 8.487629] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 8.487688] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown [ 8.487828] thinkpad_acpi: Lenovo ThinkPad X220, model 4286CTO [ 8.488211] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 8.495684] thinkpad_acpi: radio switch found; radios are disabled [ 8.501221] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 8.506371] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 8.506495] mtrr: no more MTRRs available [ 8.506573] [drm] MTRR allocation failed. Graphics performance may suffer. [ 8.507012] Registered led device: tpacpi::thinklight [ 8.507051] Registered led device: tpacpi::power [ 8.507064] Registered led device: tpacpi::standby [ 8.507077] Registered led device: tpacpi::thinkvantage [ 8.507150] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 8.507294] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 8.507400] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdaef6018 [ 8.507431] [drm:intel_opregion_setup], Public ACPI methods supported [ 8.507433] [drm:intel_opregion_setup], SWSCI supported [ 8.507435] [drm:intel_opregion_setup], ASLE supported [ 8.507460] i915 0000:00:02.0: irq 50 for MSI/MSI-X [ 8.507470] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.507527] [drm] Driver supports precise vblank timestamp query. [ 8.507588] [drm:intel_detect_pch], Found CougarPoint PCH [ 8.507590] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 8.507593] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d [ 8.507596] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 [ 8.507599] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 8.507604] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 8.507606] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 75200 1366 1414 1478 1582 768 772 779 792 0x8 0xa [ 8.507611] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 8.507613] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 8.507618] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 8.507639] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 8.507654] [drm:intel_modeset_init], 2 display pipes available. [ 8.507690] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.509279] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b [ 8.515867] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b [ 8.519575] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b [ 8.523636] tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value [ 8.523731] tpm_tis 00:0a: TPM is disabled/deactivated (0x6) [ 8.526571] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.527232] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 [ 8.527728] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 8.527857] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 8.527923] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 8.527990] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 8.528066] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [ 8.528104] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 8.528232] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 [ 8.528369] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8.538766] iwlwifi 0000:03:00.0: device EEPROM VER=0x43a, CALIB=0x6 [ 8.538835] iwlwifi 0000:03:00.0: Device SKU: 0x1F0 [ 8.538901] iwlwifi 0000:03:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7 [ 8.538988] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 8.539180] Registered led device: phy0-led [ 8.549756] [drm:intel_panel_get_backlight], get backlight PWM = 4648 [ 8.549761] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 8.549784] [drm:intel_panel_get_backlight], get backlight PWM = 4648 [ 8.549818] [drm:intel_crt_init], pch crt adpa set to 0xf40000 [ 8.554735] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 8.563512] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 8.563515] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 8.563629] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 8.564442] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 8.564648] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 8.565232] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 8.567750] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.567753] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 8.570276] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.570279] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 8.570361] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 8.572877] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.572880] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 8.575394] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.575396] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 8.575422] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 8.810999] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 8.811013] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 8.843343] [drm:intel_update_fbc], [ 8.843352] [drm:intel_update_fbc], no output, disabling [ 8.843559] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 8.843569] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 8.843576] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 8.843582] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 8.844224] [drm:intel_update_fbc], [ 8.844228] [drm:intel_update_fbc], no output, disabling [ 8.844430] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0 [ 8.845057] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 9.003359] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 9.021420] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7 [ 9.048581] [drm:init_status_page], render ring hws offset: 0x00000000 [ 9.049097] [drm:init_status_page], gen6 bsd ring hws offset: 0x00022000 [ 9.049489] [drm:init_status_page], blt ring hws offset: 0x00043000 [ 9.050152] [drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M [ 9.050224] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 9.050270] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 9.050320] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 9.050328] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 9.050340] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 9.050348] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 9.066385] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 9.066398] [drm:intel_crt_detect], CRT not detected via hotplug [ 9.066406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 9.066417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 9.082239] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 9.082253] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 9.082265] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 9.082786] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 9.083838] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.110993] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.112095] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.139239] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.139307] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 9.139324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 9.139332] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 9.139343] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 9.139354] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 9.139364] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 9.139374] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 9.139384] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 9.139393] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 9.139403] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 9.139412] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 9.139423] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 9.139804] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.139812] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 9.139820] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 9.140198] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 9.140205] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 9.140212] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 9.142748] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.152692] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.160766] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.166133] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.166148] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 9.166160] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 9.168700] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.176646] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.184623] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.190073] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.190088] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 9.190097] [drm:drm_setup_crtcs], [ 9.190107] [drm:drm_enable_connectors], connector 7 enabled? yes [ 9.190113] [drm:drm_enable_connectors], connector 13 enabled? no [ 9.190119] [drm:drm_enable_connectors], connector 16 enabled? no [ 9.190125] [drm:drm_enable_connectors], connector 19 enabled? yes [ 9.190131] [drm:drm_enable_connectors], connector 22 enabled? no [ 9.190137] [drm:drm_enable_connectors], connector 24 enabled? no [ 9.190142] [drm:drm_enable_connectors], connector 25 enabled? no [ 9.190147] [drm:drm_enable_connectors], connector 27 enabled? no [ 9.190153] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 9.190159] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 9.190166] [drm:drm_target_preferred], found mode 1366x768 [ 9.190171] [drm:drm_target_preferred], looking for cmdline mode on connector 19 [ 9.190176] [drm:drm_target_preferred], looking for preferred mode on connector 19 [ 9.190182] [drm:drm_target_preferred], found mode 1920x1080 [ 9.190187] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 9.190201] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 9.190212] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5 [ 9.208302] [drm:intelfb_create], allocated 1920x1080 fb: 0x00064000, bo ffff88020fb6ac00 [ 9.208372] fbcon: inteldrmfb (fb0) is primary device [ 9.209377] [drm:drm_crtc_helper_set_config], [ 9.209378] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 9.209390] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 9.209392] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 9.209393] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.209395] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 9.209398] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 9.209399] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 9.209400] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 9.209402] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 9.209403] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 9.209407] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 9.209846] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 9.209848] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6) [ 9.209851] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 9.209852] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 9.265886] [drm:intel_wait_for_vblank], vblank wait timed out [ 9.265900] [drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680 [ 9.265909] [drm:intel_update_fbc], [ 9.265914] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 9.265922] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 9.265929] [drm:ironlake_check_srwm], watermark 1: display plane 10, fbc lines 3, cursor 6 [ 9.265937] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6 [ 9.265944] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6 [ 9.265954] [drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:39:1366x768] [ 9.265963] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 9.265969] [drm:ironlake_check_srwm], watermark 1: display plane 10, fbc lines 3, cursor 6 [ 9.265976] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6 [ 9.265982] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6 [ 9.321751] [drm:intel_wait_for_vblank], vblank wait timed out [ 9.377617] [drm:intel_wait_for_vblank], vblank wait timed out [ 9.378431] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700 [ 9.378437] [drm:gen6_fdi_link_train], FDI train 1 done. [ 9.379090] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 9.379096] [drm:gen6_fdi_link_train], FDI train 2 done. [ 9.379099] [drm:gen6_fdi_link_train], FDI train done. [ 9.380315] [drm:intel_update_fbc], [ 9.380320] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 9.385595] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 9.385612] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 9.385620] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on [ 9.386064] [drm:drm_crtc_helper_set_config], [ 9.386068] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 9.386112] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 9.386117] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 9.386122] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.386130] [drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 9.386140] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 9.386146] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 9.386152] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 9.386157] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 9.386162] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 9.386167] [drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 9.386182] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000 [ 9.386189] [drm:drm_crtc_helper_set_mode], [CRTC:5] [ 9.386628] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 8 [ 9.386635] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 9.386641] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 9.386645] [drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 9.397020] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 9.441457] [drm:intel_wait_for_vblank], vblank wait timed out [ 9.441470] [drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680 [ 9.441479] [drm:intel_update_fbc], [ 9.441483] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 9.441490] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 9.441497] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 9.441507] [drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:40:1920x1080] [ 9.441518] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 9.441523] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 9.497323] [drm:intel_wait_for_vblank], vblank wait timed out [ 9.553180] [drm:intel_wait_for_vblank], vblank wait timed out [ 9.553994] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 9.554000] [drm:gen6_fdi_link_train], FDI train 1 done. [ 9.554653] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 9.554658] [drm:gen6_fdi_link_train], FDI train 2 done. [ 9.554662] [drm:gen6_fdi_link_train], FDI train done. [ 9.554961] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 9.555878] [drm:intel_update_fbc], [ 9.555882] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 9.556909] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 9.559049] [drm:intel_dp_start_link_train], clock recovery OK [ 9.563726] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 9.563733] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] set DPMS on [ 9.563823] [drm:drm_crtc_helper_set_config], [ 9.563827] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 9.563882] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 9.563888] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 9.563894] [drm:drm_crtc_helper_set_config], [ 9.563897] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 9.563935] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 9.563941] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 9.572727] Console: switching to colour frame buffer device 170x48 [ 9.572759] [drm:drm_crtc_helper_set_config], [ 9.572763] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 9.572804] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 9.572810] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 9.572815] [drm:drm_crtc_helper_set_config], [ 9.572819] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 9.572856] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 9.572861] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 9.575010] fb0: inteldrmfb frame buffer device [ 9.575011] drm: registered panic notifier [ 9.576917] [drm:intel_opregion_gse_intr], non asle set request?? [ 9.577695] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 9.577702] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 9.577709] [drm:intel_opregion_gse_intr], PWM freq is not supported [ 9.579582] [drm:intel_opregion_gse_intr], non asle set request?? [ 9.580241] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 9.580247] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 9.580253] [drm:intel_opregion_gse_intr], PWM freq is not supported [ 9.581023] acpi device:01: registered as cooling_device4 [ 9.581466] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 9.581813] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 9.582201] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 9.582434] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 10.125936] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 10.134704] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 10.135074] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 10.135372] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 10.420868] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 10.447255] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,discard [ 10.595844] loop: module loaded [ 11.324996] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard [ 11.331449] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard [ 12.882000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.901568] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.921984] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.968734] fuse init (API version 7.18) [ 13.080648] [drm:drm_crtc_helper_set_config], [ 13.080655] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 13.080706] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 13.080713] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 13.080719] [drm:drm_crtc_helper_set_config], [ 13.080722] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 13.080761] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 13.080767] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 13.573310] lp: driver loaded but no devices found [ 13.582931] ppdev: user-space parallel port driver [ 13.670678] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 13.722958] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 13.724544] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.110915] [drm:drm_crtc_helper_set_config], [ 14.110917] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 14.110940] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 14.110943] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 14.110945] [drm:drm_crtc_helper_set_config], [ 14.110946] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 14.110963] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 14.110965] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 14.171401] Ebtables v2.0 registered [ 14.246025] [drm:i915_driver_open], [ 14.246059] [drm:drm_crtc_helper_set_config], [ 14.246062] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 14.246099] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 14.246103] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 14.246107] [drm:drm_crtc_helper_set_config], [ 14.246109] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 14.246133] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 14.246137] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 14.246177] [drm:i915_driver_open], [ 14.246511] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8] [ 14.246518] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8] [ 14.246561] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 14.246565] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 14.246578] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 14.246583] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 14.246591] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 14.246852] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 14.246855] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 14.246859] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 14.246862] [drm:intel_crt_detect], CRT not detected via hotplug [ 14.246865] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 14.246868] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 14.246871] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 14.246874] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 14.246876] [drm:intel_crt_detect], CRT not detected via hotplug [ 14.246879] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 14.246896] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 14.246899] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 14.261466] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 14.261473] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 14.261491] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 14.261494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 14.277423] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 14.277429] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 14.277509] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 14.277519] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 14.278037] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 14.279074] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.306167] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.307234] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.334362] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.334414] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 14.334436] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 14.334443] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 14.334454] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 14.334465] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 14.334475] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 14.334485] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 14.334495] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 14.334504] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 14.334514] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 14.334523] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 14.334547] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 14.334661] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 14.334669] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 14.335072] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 14.335078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 14.335083] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 14.335086] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 14.335446] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 14.335453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 14.335494] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 14.335500] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 14.335874] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 14.335880] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 14.335897] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 14.335900] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 14.336276] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 14.336283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 14.336321] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 14.336328] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 14.338866] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.347789] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.355763] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.361217] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.361232] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 14.361255] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 14.361262] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 14.363782] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.371721] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.379694] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.385157] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.385170] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 14.385289] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 14.385291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 14.387804] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.395637] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.403615] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.409101] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.409115] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 14.409137] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 14.409144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 14.411661] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.419605] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.427607] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.433026] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.433034] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 14.433127] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 14.433133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 14.433149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 14.433153] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 14.433160] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 14.435580] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 14.435586] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 14.435591] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 14.435595] [drm:intel_crt_detect], CRT not detected via hotplug [ 14.435599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 14.435604] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 14.435607] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 14.435611] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 14.435615] [drm:intel_crt_detect], CRT not detected via hotplug [ 14.435618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 14.435641] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 14.435645] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 14.449014] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 14.449028] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 14.449071] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 14.449080] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 14.464968] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 14.464974] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 14.465035] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 14.465039] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 14.465553] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 14.466583] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.493579] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.494615] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.521627] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.521652] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 14.521662] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 14.521664] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 14.521668] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 14.521672] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 14.521675] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 14.521678] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 14.521682] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 14.521685] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 14.521689] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 14.521692] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 14.521709] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 14.522047] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 14.522050] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 14.522410] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 14.522413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 14.522416] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 14.522417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 14.522769] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 14.522771] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 14.522787] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 14.522789] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 14.523137] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 14.523139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 14.523141] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 14.523142] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 14.523503] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 14.523506] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 14.523527] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 14.523529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 14.526057] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.535322] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.543321] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.548766] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.548773] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 14.548783] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 14.548786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 14.551317] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.559269] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.567252] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.572699] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.572707] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 14.572769] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 14.572772] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 14.575291] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.583205] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.591171] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.596631] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.596640] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 14.596653] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 14.596659] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 14.599189] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.607139] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.615121] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.620566] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.620573] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 14.631617] [drm:drm_mode_addfb], [FB:42] [ 14.631672] [drm:drm_mode_setcrtc], [CRTC:3] [ 14.631676] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 14.631678] [drm:drm_crtc_helper_set_config], [ 14.631680] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:42] #connectors=1 (x y) (0 0) [ 14.631695] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 14.631697] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 14.631701] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 14.631704] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 14.631706] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 14.631709] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 14.631710] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 14.631715] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 14.646317] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 14.684420] [drm:intel_wait_for_vblank], vblank wait timed out [ 14.716759] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 14.716764] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 14.716766] [drm:intel_update_fbc], [ 14.716768] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 14.716981] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 14.716983] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6) [ 14.716987] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 14.716990] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 14.717147] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync) [ 14.772204] [drm:intel_wait_for_vblank], vblank wait timed out [ 14.774283] [drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 4096 [ 14.774287] [drm:intel_update_fbc], [ 14.774288] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 14.828059] [drm:intel_wait_for_vblank], vblank wait timed out [ 14.828075] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 14.828078] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 14.828082] [drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:43:1024x768] [ 14.828086] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 14.828089] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 14.883928] [drm:intel_wait_for_vblank], vblank wait timed out [ 14.939795] [drm:intel_wait_for_vblank], vblank wait timed out [ 14.940604] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 14.940607] [drm:gen6_fdi_link_train], FDI train 1 done. [ 14.941256] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 14.941259] [drm:gen6_fdi_link_train], FDI train 2 done. [ 14.941260] [drm:gen6_fdi_link_train], FDI train done. [ 14.942469] [drm:intel_update_fbc], [ 14.942471] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 14.942479] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 14.942483] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 14.942485] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on [ 14.942556] [drm:drm_mode_setcrtc], [CRTC:5] [ 14.942560] [drm:drm_mode_setcrtc], [CONNECTOR:19:DP-1] [ 14.942562] [drm:drm_crtc_helper_set_config], [ 14.942563] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:42] #connectors=1 (x y) (0 0) [ 14.942575] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 14.942576] [drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 14.942579] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 14.942582] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 14.942584] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 14.942586] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 14.942587] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 14.942590] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000 [ 14.942592] [drm:drm_crtc_helper_set_mode], [CRTC:5] [ 14.943002] [drm:intel_dp_link_down], [ 14.959104] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 14.982774] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 15.023639] [drm:intel_wait_for_vblank], vblank wait timed out [ 15.055910] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 15.055914] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6 [ 15.055916] [drm:intel_update_fbc], [ 15.055917] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 15.056115] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 8 [ 15.056117] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 15.056119] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 15.056121] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 15.111389] [drm:intel_wait_for_vblank], vblank wait timed out [ 15.111405] [drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 4096 [ 15.111415] [drm:intel_update_fbc], [ 15.111421] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 15.167272] [drm:intel_wait_for_vblank], vblank wait timed out [ 15.167291] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 15.167302] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6 [ 15.167313] [drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:43:1024x768] [ 15.167325] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 15.167332] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6 [ 15.223122] [drm:intel_wait_for_vblank], vblank wait timed out [ 15.245731] [drm:pch_irq_handler], PCH transcoder audio interrupt [ 15.279000] [drm:intel_wait_for_vblank], vblank wait timed out [ 15.279827] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 15.279835] [drm:gen6_fdi_link_train], FDI train 1 done. [ 15.280489] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 15.280495] [drm:gen6_fdi_link_train], FDI train 2 done. [ 15.280500] [drm:gen6_fdi_link_train], FDI train done. [ 15.281716] [drm:intel_update_fbc], [ 15.281721] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 15.282749] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 15.284885] [drm:intel_dp_start_link_train], clock recovery OK [ 15.289668] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 15.289676] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] set DPMS on [ 15.289724] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 15.291585] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 15.291596] [drm:intel_crt_detect], CRT not detected via hotplug [ 15.291604] [drm:output_poll_execute], [CONNECTOR:13:VGA-1] status updated from 2 to 2 [ 15.293815] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 15.293827] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 15.295719] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.305312] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 15.306896] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 15.306902] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-1] status updated from 2 to 2 [ 15.307417] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 15.308449] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.335482] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.335487] [drm:output_poll_execute], [CONNECTOR:19:DP-1] status updated from 1 to 1 [ 15.335848] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 15.335850] [drm:output_poll_execute], [CONNECTOR:22:HDMI-A-2] status updated from 2 to 2 [ 15.336209] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 15.336211] [drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2 [ 15.338736] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.345337] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.353330] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.358797] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 15.358806] [drm:output_poll_execute], [CONNECTOR:25:DP-2] status updated from 2 to 2 [ 15.361336] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.370778] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.381277] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.386710] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 15.386724] [drm:output_poll_execute], [CONNECTOR:27:DP-3] status updated from 2 to 2 [ 15.387348] [drm:intel_opregion_gse_intr], non asle set request?? [ 15.387503] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 15.387506] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 15.387507] [drm:intel_opregion_gse_intr], PWM freq is not supported [ 15.388079] [drm:intel_opregion_gse_intr], non asle set request?? [ 15.388236] [drm:intel_panel_get_max_backlight], max backlight PWM = 4648 [ 15.388238] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 15.388239] [drm:intel_opregion_gse_intr], PWM freq is not supported [ 15.780975] [drm:intel_crtc_cursor_set], [ 15.780996] [drm:intel_crtc_cursor_set], [ 16.092598] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 16.093628] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 16.120641] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 16.123219] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 16.131459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 16.139453] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 16.144865] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 16.147527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 16.155401] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 16.163436] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 16.168832] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 16.184742] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 16.185227] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 16.185643] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 16.185710] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 16.185718] [drm:intel_crt_detect], CRT not detected via hotplug [ 24.536385] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 24.536399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 24.536430] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 24.536438] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 24.536453] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 24.536909] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 24.536918] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 24.536927] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 24.536935] [drm:intel_crt_detect], CRT not detected via hotplug [ 24.536942] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 24.536951] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 24.536956] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 24.536964] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 24.536970] [drm:intel_crt_detect], CRT not detected via hotplug [ 24.536977] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 24.536988] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 24.536994] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 24.552172] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 24.552188] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 24.552228] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 24.552240] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 24.568127] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 24.568138] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 24.568196] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 24.568198] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 24.568709] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 24.569734] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.596652] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.597682] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.624542] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.624574] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 24.624582] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 24.624584] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 24.624599] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 24.624606] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 24.624613] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 24.624638] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 24.624645] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 24.624652] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 24.624658] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 24.624665] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 24.624750] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 24.624816] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 24.624822] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 24.625182] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 24.625189] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 24.625195] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 24.625199] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 24.625568] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 24.625573] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 24.625581] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 24.625585] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 24.625955] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 24.625959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 24.625964] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 24.625968] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 24.626336] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 24.626341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 24.626347] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 24.626351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 24.628888] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.638523] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.646500] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.651931] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 24.651948] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 24.651986] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 24.651994] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 24.654527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.662424] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.670434] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.675864] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 24.675879] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 24.675923] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 24.675931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 24.678461] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.686387] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.694380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.699793] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 24.699808] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 24.699838] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 24.699846] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 24.702380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.710320] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.718290] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 24.723733] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 24.723743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 26.761859] [drm:intel_crtc_cursor_set], [ 26.761868] [drm:intel_crtc_cursor_set], cursor off [ 26.761878] [drm:intel_crtc_cursor_set], [ 26.761882] [drm:intel_crtc_cursor_set], cursor off [ 27.915278] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 27.915292] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 27.915323] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 27.915330] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 27.915345] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 27.915803] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 27.915811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 27.915820] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 27.915828] [drm:intel_crt_detect], CRT not detected via hotplug [ 27.915834] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 27.915843] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 27.915849] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 27.915856] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 27.915862] [drm:intel_crt_detect], CRT not detected via hotplug [ 27.915907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 27.915952] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 27.915966] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 27.931861] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 27.931874] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 27.931907] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 27.931914] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 27.947808] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 27.947810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 27.947879] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 27.947892] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 27.948413] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 27.949452] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 27.976587] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 27.977645] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 28.004651] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 28.004667] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 28.004689] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 28.004696] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 28.004707] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 28.004718] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 28.004728] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 28.004738] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 28.004748] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 28.004757] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 28.004767] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 28.004777] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 28.004857] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 28.004927] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 28.004935] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 28.005313] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 28.005322] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 28.005330] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 28.005336] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 28.005711] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 28.005718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 28.005729] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 28.005735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 28.006111] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 28.006118] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 28.006125] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 28.006131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 28.006507] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 28.006513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 28.006522] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 28.006528] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 28.009077] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.018175] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.026212] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.031606] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 28.031620] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 28.031649] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 28.031656] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 28.034196] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.042125] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.050158] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.055605] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 28.055623] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 28.055684] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 28.055695] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 28.058234] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.066095] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.074147] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.079508] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 28.079526] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 28.079569] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 28.079577] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 28.082116] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.090004] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.097997] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.103491] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 28.103510] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 28.109112] [drm:drm_mode_addfb], [FB:43] [ 28.109190] [drm:drm_mode_setcrtc], [CRTC:3] [ 28.109201] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 28.109207] [drm:drm_crtc_helper_set_config], [ 28.109212] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:43] #connectors=1 (x y) (0 0) [ 28.109260] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.109267] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 28.124989] [drm:ironlake_update_plane], Writing base 01B8D000 00000000 0 0 7680 [ 28.125001] [drm:intel_update_fbc], [ 28.125006] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 28.132481] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 28.179355] [drm:intel_wait_for_vblank], vblank wait timed out [ 28.179493] [drm:drm_mode_setcrtc], [CRTC:5] [ 28.179510] [drm:drm_mode_setcrtc], [CONNECTOR:19:DP-1] [ 28.179517] [drm:drm_crtc_helper_set_config], [ 28.179521] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 28.179570] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.179578] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 28.179590] [drm:ironlake_update_plane], Writing base 01B8D000 00000000 0 0 7680 [ 28.179599] [drm:intel_update_fbc], [ 28.179604] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 28.189382] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 28.235118] [drm:intel_wait_for_vblank], vblank wait timed out [ 28.239980] [drm:drm_mode_setcrtc], [CRTC:5] [ 28.239997] [drm:drm_mode_setcrtc], [CONNECTOR:19:DP-1] [ 28.240005] [drm:drm_crtc_helper_set_config], [ 28.240009] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 28.240056] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 28.240062] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 28.240073] [drm:drm_mode_debug_printmodeline], Modeline 42:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 28.240085] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.240093] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 28.240100] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 28.240106] [drm:drm_mode_debug_printmodeline], Modeline 42:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 28.240119] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000 [ 28.240127] [drm:drm_crtc_helper_set_mode], [CRTC:5] [ 28.240545] [drm:intel_dp_link_down], [ 28.272513] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 28.323001] [drm:intel_wait_for_vblank], vblank wait timed out [ 28.363315] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 28.363328] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 28.363335] [drm:intel_update_fbc], [ 28.363340] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 28.363553] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 8 [ 28.363561] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 28.363569] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 28.363575] [drm:drm_mode_debug_printmodeline], Modeline 42:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 28.418766] [drm:intel_wait_for_vblank], vblank wait timed out [ 28.418992] [drm:ironlake_update_plane], Writing base 01B8D000 00000000 0 0 7680 [ 28.419003] [drm:intel_update_fbc], [ 28.419008] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 28.474629] [drm:intel_wait_for_vblank], vblank wait timed out [ 28.474645] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 28.474653] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 28.474665] [drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:42:] [ 28.474677] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 28.474684] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 28.496989] [drm:pch_irq_handler], PCH transcoder audio interrupt [ 28.530499] [drm:intel_wait_for_vblank], vblank wait timed out [ 28.586354] [drm:intel_wait_for_vblank], vblank wait timed out [ 28.587171] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 28.587179] [drm:gen6_fdi_link_train], FDI train 1 done. [ 28.587833] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 28.587839] [drm:gen6_fdi_link_train], FDI train 2 done. [ 28.587844] [drm:gen6_fdi_link_train], FDI train done. [ 28.589061] [drm:intel_update_fbc], [ 28.589066] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 28.590094] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 28.592270] [drm:intel_dp_start_link_train], clock recovery OK [ 28.597121] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 28.597130] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] set DPMS on [ 28.597219] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 28.599087] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 28.599096] [drm:intel_crt_detect], CRT not detected via hotplug [ 28.599102] [drm:output_poll_execute], [CONNECTOR:13:VGA-1] status updated from 2 to 2 [ 28.612803] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 28.614174] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 28.614182] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-1] status updated from 2 to 2 [ 28.614700] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 28.615739] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 28.642871] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 28.642879] [drm:output_poll_execute], [CONNECTOR:19:DP-1] status updated from 1 to 1 [ 28.643259] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 28.643265] [drm:output_poll_execute], [CONNECTOR:22:HDMI-A-2] status updated from 2 to 2 [ 28.643643] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 28.643650] [drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2 [ 28.646187] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.656657] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.664650] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.670101] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 28.670115] [drm:output_poll_execute], [CONNECTOR:25:DP-2] status updated from 2 to 2 [ 28.672656] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.680602] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.688578] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 28.693988] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 28.694003] [drm:output_poll_execute], [CONNECTOR:27:DP-3] status updated from 2 to 2 [ 29.355714] [drm:intel_crtc_cursor_set], [ 29.355719] [drm:intel_crtc_cursor_set], [ 48.584790] [drm:pch_irq_handler], PCH transcoder audio interrupt [ 48.584821] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 48.587353] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.595638] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.603668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.609070] [drm:intel_dp_link_down], [ 48.637070] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.637083] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.637090] [drm:output_poll_execute], [CONNECTOR:13:VGA-1] status updated from 2 to 2 [ 48.652905] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 48.652914] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-1] status updated from 2 to 2 [ 48.655454] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.663469] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.672333] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.676870] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 48.676885] [drm:output_poll_execute], [CONNECTOR:19:DP-1] status updated from 1 to 2 [ 48.677273] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 48.677282] [drm:output_poll_execute], [CONNECTOR:22:HDMI-A-2] status updated from 2 to 2 [ 48.677661] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 48.677668] [drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2 [ 48.680208] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.687439] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.695391] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.700847] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 48.700862] [drm:output_poll_execute], [CONNECTOR:25:DP-2] status updated from 2 to 2 [ 48.703405] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.711360] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.719332] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.724791] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 48.724806] [drm:output_poll_execute], [CONNECTOR:27:DP-3] status updated from 2 to 2 [ 48.729241] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 48.729259] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 48.729300] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 48.729310] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 48.729331] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 48.729987] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 48.732368] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.739295] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.747317] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.752715] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 48.752763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 48.752780] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.752790] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.752803] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 48.752834] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 48.752845] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 48.752855] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.752865] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.752874] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 48.752912] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 48.755426] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.763228] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.771259] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.776658] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 48.776743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 48.792562] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 48.792573] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 48.792617] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 48.795156] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.803141] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.811164] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.816580] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 48.816628] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 48.832467] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 48.832480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 48.832563] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 48.848417] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 48.848429] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 48.850956] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.859008] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.867016] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.872422] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 48.872441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 48.872454] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 48.872465] [drm:drm_mode_prune_invalid], Not using 1920x1080 mode -3 [ 48.872472] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 48.872483] [drm:drm_mode_prune_invalid], Not using 1680x1050 mode -3 [ 48.872489] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 48.872500] [drm:drm_mode_prune_invalid], Not using 1600x900 mode -3 [ 48.872506] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 48.872516] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3 [ 48.872522] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 48.872532] [drm:drm_mode_prune_invalid], Not using 1280x800 mode -3 [ 48.872538] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 48.872548] [drm:drm_mode_prune_invalid], Not using 1280x720 mode -3 [ 48.872554] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 48.872564] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3 [ 48.872569] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 48.872579] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3 [ 48.872585] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 48.872595] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3 [ 48.872626] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 48.872635] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 48.875173] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.882933] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.890968] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5015003f [ 48.896365] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 48.896383] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 48.896474] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 48.896837] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 48.896851] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 48.897231] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 48.897238] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 48.897248] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 48.897617] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 48.897626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 48.898001] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 48.898008] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 48.898020] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 48.898027] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 48.898403] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 48.898410] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 48.898417] [drm:drm_mode_getconnector], [ 48.898422] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.898431] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.898438] [CONNECTOR:24:?] [ 48.898444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 48.898820] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 48.898827] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 48.898837] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 48.898844] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 48.901382] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.910871] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.918851] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.924349] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 48.924367] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 48.924393] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 48.924401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 48.926939] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.934817] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.942789] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.948287] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 48.948305] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 48.948350] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 48.948361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 48.950900] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.958746] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.966730] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.972232] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 48.972249] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 48.972275] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 48.972284] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 48.974822] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.982688] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.990669] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 48.996164] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 48.996181] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 53.934188] [drm:pch_irq_handler], PCH transcoder audio interrupt [ 53.934213] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 53.936059] [drm:intel_dp_check_link_status], TMDS-20: channel EQ not ok, retraining [ 53.936681] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 53.938823] [drm:intel_dp_start_link_train], clock recovery OK [ 53.943009] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 53.943017] [drm:intel_crt_detect], CRT not detected via hotplug [ 53.943024] [drm:output_poll_execute], [CONNECTOR:13:VGA-1] status updated from 2 to 2 [ 53.955870] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 53.955879] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-1] status updated from 2 to 2 [ 53.956398] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 53.957437] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 53.984584] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 53.984594] [drm:output_poll_execute], [CONNECTOR:19:DP-1] status updated from 2 to 1 [ 53.984974] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 53.984981] [drm:output_poll_execute], [CONNECTOR:22:HDMI-A-2] status updated from 2 to 2 [ 53.985360] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 53.985367] [drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2 [ 53.987905] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 53.998343] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.006329] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.011783] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 54.011798] [drm:output_poll_execute], [CONNECTOR:25:DP-2] status updated from 2 to 2 [ 54.014339] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.022289] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.030272] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.035732] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 54.035746] [drm:output_poll_execute], [CONNECTOR:27:DP-3] status updated from 2 to 2 [ 54.040047] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 54.040065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 54.040107] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 54.040117] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 54.040138] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 54.040815] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 54.040828] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 54.040841] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 54.040852] [drm:intel_crt_detect], CRT not detected via hotplug [ 54.040862] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 54.040876] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 54.040885] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 54.040895] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 54.040905] [drm:intel_crt_detect], CRT not detected via hotplug [ 54.040914] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 54.040934] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 54.041443] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 54.042491] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 54.069663] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 54.069693] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 54.083553] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 54.083564] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 54.083619] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 54.086138] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.094158] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.102103] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.107602] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 54.107685] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 54.123458] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 54.123473] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 54.123536] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 54.123544] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 54.124060] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 54.125087] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 54.152096] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 54.153135] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 54.180276] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 54.180379] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 54.180399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 54.180407] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 54.180419] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 54.180430] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 54.180441] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 54.180451] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 54.180461] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 54.180471] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 54.180481] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 54.180491] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 54.180533] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 54.183094] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.189896] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.197866] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.203365] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 54.203539] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 54.219222] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 54.219255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 54.219638] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 54.219642] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 54.219646] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 54.220001] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 54.220003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 54.220362] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 54.220363] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 54.220368] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 54.220722] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 54.220724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 54.221081] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 54.221083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 54.221085] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 54.221086] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 54.221445] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 54.221447] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 54.221450] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 54.221451] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 54.221453] [drm:intel_crt_detect], CRT not detected via hotplug [ 54.221455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 54.223980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.233780] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.241806] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.247209] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 54.247226] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 54.247252] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 54.247261] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 54.249800] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.257722] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.265750] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.271151] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 54.271169] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 54.271214] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 54.271225] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 54.273763] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.281658] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.289692] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.295091] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 54.295109] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 54.295135] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 54.295145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 54.297683] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.305602] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.313634] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 54.319031] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 54.319049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 61.985876] [drm:intel_crtc_cursor_set], [ 61.985887] [drm:intel_crtc_cursor_set], cursor off [ 61.985901] [drm:intel_crtc_cursor_set], [ 61.985907] [drm:intel_crtc_cursor_set], cursor off [ 64.051133] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 64.051146] [drm:intel_crt_detect], CRT not detected via hotplug [ 64.051153] [drm:output_poll_execute], [CONNECTOR:13:VGA-1] status updated from 2 to 2 [ 64.067004] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 64.067013] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-1] status updated from 2 to 2 [ 64.067533] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 64.068571] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 64.095707] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 64.095716] [drm:output_poll_execute], [CONNECTOR:19:DP-1] status updated from 1 to 1 [ 64.096095] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 64.096102] [drm:output_poll_execute], [CONNECTOR:22:HDMI-A-2] status updated from 2 to 2 [ 64.096480] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 64.096487] [drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2 [ 64.099025] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 64.109497] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 64.117475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 64.123418] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 64.123432] [drm:output_poll_execute], [CONNECTOR:25:DP-2] status updated from 2 to 2 [ 64.125974] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 64.133435] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 64.141425] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 64.146864] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 64.146878] [drm:output_poll_execute], [CONNECTOR:27:DP-3] status updated from 2 to 2 [ 67.639745] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 67.639760] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 67.639792] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 67.639800] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 67.639815] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 67.640291] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 67.640299] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 67.640309] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 67.640317] [drm:intel_crt_detect], CRT not detected via hotplug [ 67.640323] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 67.640332] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 67.640338] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 67.640346] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 67.640352] [drm:intel_crt_detect], CRT not detected via hotplug [ 67.640358] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 67.640370] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 67.640376] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 67.654191] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 67.654200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 67.654251] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 67.654264] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 67.670140] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 67.670144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 67.670164] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 67.670167] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 67.671289] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 67.672328] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 67.699468] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 67.700570] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 67.727744] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 67.727811] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 67.727832] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 67.727839] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 67.727851] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 67.727862] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 67.727873] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 67.727883] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 67.727893] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 67.727903] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 67.727913] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 67.727924] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 67.728010] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 67.728083] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 67.728091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 67.728471] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 67.728480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 67.728488] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 67.728494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 67.728872] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 67.728879] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 67.728890] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 67.728896] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 67.729274] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 67.729281] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 67.729288] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 67.729294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 67.729670] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 67.729677] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 67.729686] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 67.729693] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 67.732229] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.740574] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.748553] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.754049] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 67.754067] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 67.754106] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 67.754111] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 67.756643] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.764513] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.772488] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.777990] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 67.778008] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 67.778071] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 67.778081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 67.780620] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.788451] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.796432] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.801934] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 67.801952] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 67.801998] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 67.802007] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 67.804547] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.812395] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.820374] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 67.825868] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 67.825886] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 67.831300] [drm:intel_dp_link_down], [ 67.857799] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 67.865731] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 67.913655] [drm:intel_wait_for_vblank], vblank wait timed out [ 67.938011] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 67.938024] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 67.938032] [drm:intel_update_fbc], [ 67.938037] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 67.938988] [drm:drm_mode_addfb], [FB:42] [ 67.939062] [drm:drm_mode_setcrtc], [CRTC:3] [ 67.939075] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 67.939081] [drm:drm_crtc_helper_set_config], [ 67.939085] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:42] #connectors=1 (x y) (0 0) [ 67.939134] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 67.939141] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 67.946042] [drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 4096 [ 67.946052] [drm:intel_update_fbc], [ 67.946057] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 67.951413] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 68.001442] [drm:intel_wait_for_vblank], vblank wait timed out [ 68.001560] [drm:drm_crtc_helper_set_config], [ 68.001567] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 68.013080] [drm:drm_mode_setcrtc], [CRTC:5] [ 68.013101] [drm:drm_mode_setcrtc], [CONNECTOR:19:DP-1] [ 68.013110] [drm:drm_crtc_helper_set_config], [ 68.013117] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:42] #connectors=1 (x y) (0 0) [ 68.013189] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 68.013197] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 68.013206] [drm:drm_mode_debug_printmodeline], Modeline 42:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 68.013222] [drm:drm_mode_debug_printmodeline], Modeline 43:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 68.013238] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 68.013248] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 68.013258] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 68.013266] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 68.013299] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 68.013308] [drm:drm_mode_debug_printmodeline], Modeline 43:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 68.013327] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000 [ 68.013340] [drm:drm_crtc_helper_set_mode], [CRTC:5] [ 68.013790] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 8 [ 68.013802] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 68.013812] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 68.013819] [drm:drm_mode_debug_printmodeline], Modeline 43:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 68.069279] [drm:intel_wait_for_vblank], vblank wait timed out [ 68.069505] [drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 4096 [ 68.069515] [drm:intel_update_fbc], [ 68.069521] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 68.069530] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 68.069538] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6 [ 68.069548] [drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:43:] [ 68.069560] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 68.069567] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6 [ 68.125138] [drm:intel_wait_for_vblank], vblank wait timed out [ 68.181000] [drm:intel_wait_for_vblank], vblank wait timed out [ 68.181817] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 68.181825] [drm:gen6_fdi_link_train], FDI train 1 done. [ 68.182479] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 68.182486] [drm:gen6_fdi_link_train], FDI train 2 done. [ 68.182490] [drm:gen6_fdi_link_train], FDI train done. [ 68.183708] [drm:intel_update_fbc], [ 68.183713] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 68.184642] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 68.186208] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000 [ 68.187741] [drm:intel_dp_start_link_train], clock recovery OK [ 68.192321] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 68.192329] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] set DPMS on [ 68.208070] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 68.332787] [drm:intel_crtc_cursor_set], [ 68.332794] [drm:intel_crtc_cursor_set], [ 73.341886] [drm:intel_crtc_cursor_set], [ 73.341898] [drm:intel_crtc_cursor_set], cursor off [ 73.341913] [drm:intel_crtc_cursor_set], [ 73.341919] [drm:intel_crtc_cursor_set], cursor off [ 74.727992] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 74.728006] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 74.728038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 74.728046] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 74.728063] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 74.728529] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 74.728538] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 74.728547] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 74.728554] [drm:intel_crt_detect], CRT not detected via hotplug [ 74.728561] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 74.728570] [drm:drm_mode_getconnector], [CONNECTOR:13:?] [ 74.728576] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 74.728583] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 74.728590] [drm:intel_crt_detect], CRT not detected via hotplug [ 74.728596] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 74.728608] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 74.728614] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 74.740769] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 74.740780] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 74.740837] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 74.740850] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 74.756723] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 74.756736] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 74.756802] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 74.756811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 74.757331] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 74.758371] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 74.785514] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 74.786615] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 74.813760] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 74.813826] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 74.813848] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 74.813855] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 74.813867] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 74.813878] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 74.813888] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 74.813898] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 74.813909] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 74.813919] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 74.813929] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 74.813939] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 74.814020] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 74.814093] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 74.814101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 74.814481] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 74.814489] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 74.814498] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 74.814504] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 74.814881] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 74.814888] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 74.814900] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 74.814906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 74.815282] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 74.815289] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 74.815297] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 74.815303] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 74.815679] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 74.815686] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 74.815696] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 74.815702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 74.818238] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.827145] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.835125] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.840626] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 74.840643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 74.840688] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 74.840696] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 74.843234] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.851043] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.859068] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.864564] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 74.864582] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 74.864645] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 74.864655] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 74.867194] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.875025] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.883002] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.888506] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 74.888525] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 74.888570] [drm:drm_mode_getconnector], [CONNECTOR:27:?] [ 74.888578] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 74.891117] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.898967] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.906947] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 74.912449] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 74.912467] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 74.915958] [drm:drm_mode_addfb], [FB:43] [ 74.916038] [drm:drm_mode_setcrtc], [CRTC:3] [ 74.916049] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 74.916055] [drm:drm_crtc_helper_set_config], [ 74.916060] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:43] #connectors=1 (x y) (0 0) [ 74.916108] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 74.916116] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 74.930596] [drm:ironlake_update_plane], Writing base 01C04000 00000000 0 0 7680 [ 74.930610] [drm:intel_update_fbc], [ 74.930615] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 74.945059] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 74.984274] [drm:intel_wait_for_vblank], vblank wait timed out [ 74.984419] [drm:drm_mode_setcrtc], [CRTC:5] [ 74.984439] [drm:drm_mode_setcrtc], [CONNECTOR:19:DP-1] [ 74.984447] [drm:drm_crtc_helper_set_config], [ 74.984453] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 74.984523] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 74.984534] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 74.984548] [drm:ironlake_update_plane], Writing base 01C04000 00000000 0 0 7680 [ 74.984557] [drm:intel_update_fbc], [ 74.984562] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 74.990943] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 75.040136] [drm:intel_wait_for_vblank], vblank wait timed out [ 75.045035] [drm:drm_mode_setcrtc], [CRTC:5] [ 75.045056] [drm:drm_mode_setcrtc], [CONNECTOR:19:DP-1] [ 75.045065] [drm:drm_crtc_helper_set_config], [ 75.045072] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 75.045145] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 75.045154] [drm:drm_mode_debug_printmodeline], Modeline 43:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 75.045170] [drm:drm_mode_debug_printmodeline], Modeline 42:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 75.045188] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 75.045199] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 75.045210] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 75.045218] [drm:drm_mode_debug_printmodeline], Modeline 42:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 75.045237] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000 [ 75.045249] [drm:drm_crtc_helper_set_mode], [CRTC:5] [ 75.045668] [drm:intel_dp_link_down], [ 75.074061] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 75.127916] [drm:intel_wait_for_vblank], vblank wait timed out [ 75.160255] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 75.160268] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 75.160276] [drm:intel_update_fbc], [ 75.160281] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 75.160493] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 8 [ 75.160502] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 75.160509] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 75.160515] [drm:drm_mode_debug_printmodeline], Modeline 42:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 75.215705] [drm:intel_wait_for_vblank], vblank wait timed out [ 75.215932] [drm:ironlake_update_plane], Writing base 01C04000 00000000 0 0 7680 [ 75.215942] [drm:intel_update_fbc], [ 75.215947] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 75.271570] [drm:intel_wait_for_vblank], vblank wait timed out [ 75.271585] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 75.271594] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 75.271605] [drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:42:] [ 75.271618] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 75.271625] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 75.293879] [drm:pch_irq_handler], PCH transcoder audio interrupt [ 75.327430] [drm:intel_wait_for_vblank], vblank wait timed out [ 75.383290] [drm:intel_wait_for_vblank], vblank wait timed out [ 75.384107] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 75.384115] [drm:gen6_fdi_link_train], FDI train 1 done. [ 75.384769] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 75.384776] [drm:gen6_fdi_link_train], FDI train 2 done. [ 75.384781] [drm:gen6_fdi_link_train], FDI train done. [ 75.385998] [drm:intel_update_fbc], [ 75.386003] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 75.387031] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 75.389208] [drm:intel_dp_start_link_train], clock recovery OK [ 75.393901] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 75.393909] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] set DPMS on [ 75.394023] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 75.395889] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 75.395899] [drm:intel_crt_detect], CRT not detected via hotplug [ 75.395905] [drm:output_poll_execute], [CONNECTOR:13:VGA-1] status updated from 2 to 2 [ 75.409683] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 75.411114] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 75.411123] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-1] status updated from 2 to 2 [ 75.411662] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 75.412702] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 75.439830] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 75.439839] [drm:output_poll_execute], [CONNECTOR:19:DP-1] status updated from 1 to 1 [ 75.440218] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 75.440225] [drm:output_poll_execute], [CONNECTOR:22:HDMI-A-2] status updated from 2 to 2 [ 75.440602] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 75.440609] [drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2 [ 75.443146] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 75.453599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 75.461586] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 75.467027] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 75.467042] [drm:output_poll_execute], [CONNECTOR:25:DP-2] status updated from 2 to 2 [ 75.469586] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 75.477548] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 75.485520] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 75.490969] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 75.490984] [drm:output_poll_execute], [CONNECTOR:27:DP-3] status updated from 2 to 2 [ 75.685470] [drm:intel_crtc_cursor_set], [ 75.685477] [drm:intel_crtc_cursor_set], [ 83.995364] [drm:intel_crtc_cursor_set], [ 83.995374] [drm:intel_crtc_cursor_set], cursor off [ 83.995387] [drm:intel_crtc_cursor_set], [ 83.995393] [drm:intel_crtc_cursor_set], cursor off [ 97.835396] [drm:intel_crtc_cursor_set], [ 97.835413] [drm:intel_crtc_cursor_set], [ 97.928890] [drm:intel_crtc_cursor_set], [ 97.928902] [drm:intel_crtc_cursor_set], cursor off [ 97.928916] [drm:intel_crtc_cursor_set], [ 97.928922] [drm:intel_crtc_cursor_set], cursor off [ 98.098947] [drm:intel_crtc_cursor_set], [ 98.098961] [drm:intel_crtc_cursor_set], [ 98.248136] [drm:intel_crtc_cursor_set], [ 98.248147] [drm:intel_crtc_cursor_set], cursor off [ 98.248160] [drm:intel_crtc_cursor_set], [ 98.248167] [drm:intel_crtc_cursor_set], cursor off [ 98.441820] [drm:intel_crtc_cursor_set], [ 98.441837] [drm:intel_crtc_cursor_set], [ 99.676616] [drm:intel_crtc_cursor_set], [ 99.676626] [drm:intel_crtc_cursor_set], cursor off [ 99.676640] [drm:intel_crtc_cursor_set], [ 99.676646] [drm:intel_crtc_cursor_set], cursor off [ 100.460449] [drm:intel_crtc_cursor_set], [ 100.460465] [drm:intel_crtc_cursor_set], [ 100.745917] [drm:intel_crtc_cursor_set], [ 100.745926] [drm:intel_crtc_cursor_set], cursor off [ 100.745939] [drm:intel_crtc_cursor_set], [ 100.745945] [drm:intel_crtc_cursor_set], cursor off [ 104.107313] [drm:drm_crtc_helper_set_config], [ 104.107320] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 104.107369] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 104.107375] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [ 104.107385] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 104.107398] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 104.107404] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 104.107410] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 104.107415] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 104.107441] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 104.115713] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 104.160538] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.184891] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 104.184902] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.184910] [drm:intel_update_fbc], [ 104.184913] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.185150] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 104.185157] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6) [ 104.185165] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 104.185170] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 104.185335] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync) [ 104.240341] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.240568] [drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680 [ 104.240577] [drm:intel_update_fbc], [ 104.240581] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.296176] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.296190] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 104.296197] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.296208] [drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:39:1366x768] [ 104.296218] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 104.296224] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.352067] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.407929] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.408744] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 104.408751] [drm:gen6_fdi_link_train], FDI train 1 done. [ 104.409403] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 104.409409] [drm:gen6_fdi_link_train], FDI train 2 done. [ 104.409413] [drm:gen6_fdi_link_train], FDI train done. [ 104.410629] [drm:intel_update_fbc], [ 104.410633] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.410647] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 104.410659] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 104.410666] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on [ 104.410701] [drm:drm_crtc_helper_set_config], [ 104.410705] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 104.410751] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 104.410758] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 104.410768] [drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680 [ 104.410776] [drm:intel_update_fbc], [ 104.410779] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.421344] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 104.427335] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 104.463792] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.463816] [drm:drm_fb_helper_hotplug_event], [ 104.463824] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 104.463858] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 104.463866] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 104.463877] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] [ 104.463885] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 104.463891] [drm:intel_crt_detect], CRT not detected via hotplug [ 104.463897] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected [ 104.463904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] [ 104.479643] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 104.479651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-1] disconnected [ 104.479658] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 104.480784] [drm:intel_dp_detect], DPCD: 110a840101000180 [ 104.481844] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 104.508991] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 104.510046] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 104.537185] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 104.537280] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 104.537302] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] probed modes : [ 104.537308] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 104.537319] [drm:drm_mode_debug_printmodeline], Modeline 35:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 104.537328] [drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 104.537337] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 104.537346] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 104.537355] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 104.537364] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 104.537372] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 104.537381] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 104.537391] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] [ 104.537770] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 104.537778] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-2] disconnected [ 104.537784] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] [ 104.538160] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 104.538166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected [ 104.538173] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] [ 104.540708] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 104.550068] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 104.558096] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 104.563549] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 104.563565] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-2] disconnected [ 104.563575] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] [ 104.566113] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 104.574054] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 104.582032] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 104.587484] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 104.587500] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-3] disconnected [ 104.587509] [drm:drm_setup_crtcs], [ 104.587518] [drm:drm_enable_connectors], connector 7 enabled? yes [ 104.587524] [drm:drm_enable_connectors], connector 13 enabled? no [ 104.587529] [drm:drm_enable_connectors], connector 16 enabled? no [ 104.587534] [drm:drm_enable_connectors], connector 19 enabled? yes [ 104.587538] [drm:drm_enable_connectors], connector 22 enabled? no [ 104.587543] [drm:drm_enable_connectors], connector 24 enabled? no [ 104.587548] [drm:drm_enable_connectors], connector 25 enabled? no [ 104.587553] [drm:drm_enable_connectors], connector 27 enabled? no [ 104.587558] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 104.587563] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 104.587568] [drm:drm_target_preferred], found mode 1366x768 [ 104.587573] [drm:drm_target_preferred], looking for cmdline mode on connector 19 [ 104.587578] [drm:drm_target_preferred], looking for preferred mode on connector 19 [ 104.587583] [drm:drm_target_preferred], found mode 1920x1080 [ 104.587587] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 104.587601] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 104.587613] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5 [ 104.587624] [drm:drm_crtc_helper_set_config], [ 104.587628] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 104.587675] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 104.587681] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 104.587687] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [NOCRTC] [ 104.587693] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 104.587698] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 104.587714] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 104.588139] [drm:intel_dp_link_down], [ 104.626677] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 104.671277] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.695635] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 104.695646] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.695653] [drm:intel_update_fbc], [ 104.695657] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.695895] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 104.695901] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6) [ 104.695909] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 104.695914] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9 [ 104.751086] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.751101] [drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680 [ 104.751110] [drm:intel_update_fbc], [ 104.751115] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.806948] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.806960] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 104.806968] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.806978] [drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:39:1366x768] [ 104.806987] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 104.806993] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.862811] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.918675] [drm:intel_wait_for_vblank], vblank wait timed out [ 104.919489] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 104.919496] [drm:gen6_fdi_link_train], FDI train 1 done. [ 104.920149] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 104.920154] [drm:gen6_fdi_link_train], FDI train 2 done. [ 104.920158] [drm:gen6_fdi_link_train], FDI train done. [ 104.921374] [drm:intel_update_fbc], [ 104.921378] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.921392] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4648 [ 104.921404] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 104.921411] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on [ 104.921444] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 104.921451] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 104.936736] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 104.938078] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 104.974535] [drm:intel_wait_for_vblank], vblank wait timed out [ 105.006871] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 105.006883] [drm:ironlake_check_srwm], watermark 1: display plane 10, fbc lines 3, cursor 6 [ 105.006891] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6 [ 105.006899] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6 [ 105.006906] [drm:intel_update_fbc], [ 105.006910] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 105.007119] [drm:drm_crtc_helper_set_config], [ 105.007123] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 105.007168] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 105.007176] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 105.007182] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 105.007188] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 105.007194] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 105.007199] [drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 105.007217] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000 [ 105.007225] [drm:drm_crtc_helper_set_mode], [CRTC:5] [ 105.007665] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 8 [ 105.007672] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 105.007678] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 105.007682] [drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 105.062319] [drm:intel_wait_for_vblank], vblank wait timed out [ 105.062333] [drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680 [ 105.062342] [drm:intel_update_fbc], [ 105.062346] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 105.062354] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 105.062360] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 105.062370] [drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:40:1920x1080] [ 105.062381] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 105.062387] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 105.118183] [drm:intel_wait_for_vblank], vblank wait timed out [ 105.174046] [drm:intel_wait_for_vblank], vblank wait timed out [ 105.174861] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 105.174867] [drm:gen6_fdi_link_train], FDI train 1 done. [ 105.175520] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 105.175525] [drm:gen6_fdi_link_train], FDI train 2 done. [ 105.175529] [drm:gen6_fdi_link_train], FDI train done. [ 105.176745] [drm:intel_update_fbc], [ 105.176749] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 105.177677] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 105.179210] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000 [ 105.180742] [drm:intel_dp_start_link_train], clock recovery OK [ 105.185248] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 105.185255] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] set DPMS on [ 105.185287] [drm:drm_crtc_helper_set_config], [ 105.185291] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 105.185337] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 105.185343] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 105.185349] [drm:drm_crtc_helper_set_config], [ 105.185353] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 105.185391] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 105.185397] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 105.185422] [drm:drm_crtc_helper_set_config], [ 105.185425] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 105.185463] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 105.185469] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 105.185475] [drm:drm_crtc_helper_set_config], [ 105.185478] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 105.185515] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 105.185521] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 105.200981] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 107.909958] Bridge firewalling registered [ 108.365551] Ebtables v2.0 unregistered [ 108.473162] [drm:drm_crtc_helper_set_config], [ 108.473175] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [ 108.473254] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 108.473267] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5] [ 108.473279] [drm:drm_crtc_helper_set_config], [ 108.473286] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [ 108.473353] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 108.473364] [drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-1] to [CRTC:5]