[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.1+ (root@castle.dion.org.ua) (gcc version 4.7.1 (Debian 4.7.1-3) ) #2 SMP PREEMPT Sat Aug 11 14:51:09 EEST 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.1+ root=/dev/mapper/castle.stg01-root ro [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7bdffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7be0000-0x00000000d7be2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d7be3000-0x00000000d7beffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d7bf0000-0x00000000d7bfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. H55M-USB3/H55M-USB3, BIOS F2 01/06/2010 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D8000000 mask FF8000000 uncachable [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 118000000 mask FF8000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xd7be0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5700-0x000f570f] mapped at [ffff8800000f5700] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xd7bdffff] [ 0.000000] [mem 0x00000000-0xd79fffff] page 2M [ 0.000000] [mem 0xd7a00000-0xd7bdffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xd7bdffff @ [mem 0x1f93d000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x117ffffff] [ 0.000000] [mem 0x100000000-0x117ffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x117ffffff @ [mem 0xd7bda000-0xd7bdffff] [ 0.000000] RAMDISK: [mem 0x3676a000-0x373acfff] [ 0.000000] ACPI: RSDP 00000000000f70c0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000d7be3040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000d7be30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000d7be3180 054D2 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000d7be0000 00040 [ 0.000000] ACPI: HPET 00000000d7be87c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000d7be8840 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000d7be8880 00000 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000d7be8d50 00A4A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000d7be86c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000d7be97a0 01B60 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000117ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x117ffffff] [ 0.000000] NODE_DATA [mem 0x117ffc000-0x117ffffff] [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113a00000-ffff880116ffffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x117ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xd7bdffff] [ 0.000000] node 0: [mem 0x100000000-0x117ffffff] [ 0.000000] On node 0 totalpages: 981869 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 865304 pages, LIFO batch:31 [ 0.000000] Normal zone: 1344 pages used for memmap [ 0.000000] Normal zone: 96960 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000d7be0000 - 00000000d7be3000 [ 0.000000] PM: Registered nosave memory: 00000000d7be3000 - 00000000d7bf0000 [ 0.000000] PM: Registered nosave memory: 00000000d7bf0000 - 00000000d7c00000 [ 0.000000] PM: Registered nosave memory: 00000000d7c00000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xd7c00000-0xf3ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880117c00000 s83072 r8192 d23424 u262144 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 966183 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.1+ root=/dev/mapper/castle.stg01-root ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3784076k/4587520k available (3739k kernel code, 660044k absent, 143400k reserved, 2988k data, 596k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 15728640 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2933.105 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.21 BogoMIPS (lpj=11732420) [ 0.000094] pid_max: default: 32768 minimum: 301 [ 0.000184] Security Framework initialized [ 0.000230] SELinux: Disabled at boot. [ 0.000514] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001450] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001862] Mount-cache hash table entries: 256 [ 0.002091] Initializing cgroup subsys cpuacct [ 0.002136] Initializing cgroup subsys memory [ 0.002189] Initializing cgroup subsys devices [ 0.002234] Initializing cgroup subsys freezer [ 0.002278] Initializing cgroup subsys net_cls [ 0.002322] Initializing cgroup subsys blkio [ 0.002390] CPU: Physical Processor ID: 0 [ 0.002433] CPU: Processor Core ID: 0 [ 0.002478] mce: CPU supports 9 MCE banks [ 0.002528] CPU0: Thermal monitoring enabled (TM1) [ 0.002577] using mwait in idle threads. [ 0.002926] ACPI: Core revision 20120320 [ 0.007913] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.047631] CPU0: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz stepping 02 [ 0.155454] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.155594] CPUID marked event: 'bus cycles' unavailable [ 0.155639] ... version: 3 [ 0.155682] ... bit width: 48 [ 0.155725] ... generic registers: 4 [ 0.155766] ... value mask: 0000ffffffffffff [ 0.155812] ... max period: 000000007fffffff [ 0.155857] ... fixed-purpose events: 3 [ 0.155898] ... event mask: 000000070000000f [ 0.167607] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.175466] Booting Node 0, Processors #1 #2 #3 [ 0.228593] Brought up 4 CPUs [ 0.228671] Total of 4 processors activated (23464.84 BogoMIPS). [ 0.231305] devtmpfs: initialized [ 0.234710] EVM: security.selinux [ 0.234751] EVM: security.capability [ 0.234832] PM: Registering ACPI NVS region [mem 0xd7be0000-0xd7be2fff] (12288 bytes) [ 0.234992] dummy: [ 0.235097] NET: Registered protocol family 16 [ 0.235257] ACPI: bus type pci registered [ 0.235353] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.235424] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.238407] PCI: Using configuration type 1 for base access [ 0.239011] bio: create slab at 0 [ 0.239159] ACPI: Added _OSI(Module Device) [ 0.239203] ACPI: Added _OSI(Processor Device) [ 0.239247] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.239291] ACPI: Added _OSI(Processor Aggregator Device) [ 0.240128] ACPI: EC: Look up EC in DSDT [ 0.243947] ACPI Warning: Incorrect checksum in table [TAMG] - 0xFA, should be 0xF9 (20120320/tbutils-323) [ 0.244709] ACPI: Interpreter enabled [ 0.244754] ACPI: (supports S0 S3 S4 S5) [ 0.244880] ACPI: Using IOAPIC for interrupt routing [ 0.248825] ACPI: No dock devices found. [ 0.248871] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.248988] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.249104] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.249155] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.249205] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.249271] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.249337] pci_root PNP0A03:00: host bridge window [mem 0xd7c00000-0xfebfffff] [ 0.249437] PCI host bridge to bus 0000:00 [ 0.249481] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.249529] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.249577] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.249626] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.249676] pci_bus 0000:00: root bus resource [mem 0xd7c00000-0xfebfffff] [ 0.249732] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000 [ 0.249748] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.251537] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400 [ 0.251565] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.251578] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000 [ 0.251587] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit] [ 0.251593] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.251597] pci 0000:00:02.0: reg 20: [io 0xff00-0xff07] [ 0.251646] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.251672] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit] [ 0.251761] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.251787] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300 [ 0.251822] pci 0000:00:1a.0: reg 20: [io 0xfe00-0xfe1f] [ 0.251864] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300 [ 0.251899] pci 0000:00:1a.1: reg 20: [io 0xfd00-0xfd1f] [ 0.251942] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300 [ 0.251978] pci 0000:00:1a.2: reg 20: [io 0xfc00-0xfc1f] [ 0.252029] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320 [ 0.252046] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff] [ 0.252123] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.252146] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.252159] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit] [ 0.252214] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.252233] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.252289] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.252309] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.252365] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.252384] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400 [ 0.252440] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.252464] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300 [ 0.252499] pci 0000:00:1d.0: reg 20: [io 0xfb00-0xfb1f] [ 0.252543] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300 [ 0.252579] pci 0000:00:1d.1: reg 20: [io 0xfa00-0xfa1f] [ 0.252622] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300 [ 0.252658] pci 0000:00:1d.2: reg 20: [io 0xf900-0xf91f] [ 0.252708] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320 [ 0.252725] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff] [ 0.252801] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.252819] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.252870] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100 [ 0.252976] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601 [ 0.252991] pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807] [ 0.252997] pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703] [ 0.253004] pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607] [ 0.253010] pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503] [ 0.253017] pci 0000:00:1f.2: reg 20: [io 0xf400-0xf41f] [ 0.253023] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff] [ 0.253059] pci 0000:00:1f.2: PME# supported from D3hot [ 0.253075] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.253087] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit] [ 0.253104] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.253156] pci 0000:01:00.0: [168c:0024] type 00 class 0x028000 [ 0.253171] pci 0000:01:00.0: reg 10: [mem 0xfbcf0000-0xfbcfffff 64bit] [ 0.253243] pci 0000:01:00.0: supports D1 [ 0.253245] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 0.253262] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.253338] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.253387] pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.253436] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601 [ 0.253516] pci 0000:02:00.0: reg 24: [mem 0xfbafe000-0xfbafffff] [ 0.253573] pci 0000:02:00.0: PME# supported from D3hot [ 0.253602] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185 [ 0.253624] pci 0000:02:00.1: reg 10: [io 0xdf00-0xdf07] [ 0.253637] pci 0000:02:00.1: reg 14: [io 0xde00-0xde03] [ 0.253649] pci 0000:02:00.1: reg 18: [io 0xdd00-0xdd07] [ 0.253661] pci 0000:02:00.1: reg 1c: [io 0xdc00-0xdc03] [ 0.253674] pci 0000:02:00.1: reg 20: [io 0xdb00-0xdb0f] [ 0.253749] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.253826] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.253873] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.253877] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.253927] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.253942] pci 0000:03:00.0: reg 10: [io 0xee00-0xeeff] [ 0.253967] pci 0000:03:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit pref] [ 0.253983] pci 0000:03:00.0: reg 20: [mem 0xfbef8000-0xfbefbfff 64bit pref] [ 0.253994] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.254051] pci 0000:03:00.0: supports D1 D2 [ 0.254053] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.259449] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.259511] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.259517] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.259527] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.259582] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.259606] pci 0000:04:00.0: reg 10: [mem 0xfbdfe000-0xfbdfffff 64bit] [ 0.259728] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.267446] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.267510] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.267547] pci 0000:05:01.0: [1102:0004] type 00 class 0x040100 [ 0.267561] pci 0000:05:01.0: reg 10: [io 0xcf00-0xcf3f] [ 0.267623] pci 0000:05:01.0: supports D1 D2 [ 0.267637] pci 0000:05:02.0: [1186:4300] type 00 class 0x020000 [ 0.267652] pci 0000:05:02.0: reg 10: [io 0xcc00-0xccff] [ 0.267661] pci 0000:05:02.0: reg 14: [mem 0xfbbff000-0xfbbff0ff] [ 0.267696] pci 0000:05:02.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.267720] pci 0000:05:02.0: supports D1 D2 [ 0.267722] pci 0000:05:02.0: PME# supported from D1 D2 D3hot D3cold [ 0.267743] pci 0000:05:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.267758] pci 0000:05:07.0: reg 10: [mem 0xfbbfe000-0xfbbfe7ff] [ 0.267767] pci 0000:05:07.0: reg 14: [mem 0xfbbf8000-0xfbbfbfff] [ 0.267825] pci 0000:05:07.0: supports D1 D2 [ 0.267827] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot [ 0.267858] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.267911] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.267914] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.267919] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.267921] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.267923] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.267925] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.267927] pci 0000:00:1e.0: bridge window [mem 0xd7c00000-0xfebfffff] (subtractive decode) [ 0.267945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.268200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.268245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.268279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.268322] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.268427] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.268474] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.268544] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.279795] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.280123] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.280449] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.280775] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.281099] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.281461] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.281786] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.282110] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.282480] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.282558] vgaarb: loaded [ 0.282597] vgaarb: bridge control possible 0000:00:02.0 [ 0.282687] PCI: Using ACPI for IRQ routing [ 0.283848] PCI: Discovered peer bus 3f [ 0.283890] PCI: root bus 3f: using default resources [ 0.283891] PCI: Probing PCI hardware (bus 3f) [ 0.283916] PCI host bridge to bus 0000:3f [ 0.283960] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.284008] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.284061] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000 [ 0.284079] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000 [ 0.284098] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000 [ 0.284115] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000 [ 0.284131] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000 [ 0.284148] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000 [ 0.284281] PCI: pci_cache_line_size set to 64 bytes [ 0.284373] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.284375] e820: reserve RAM buffer [mem 0xd7be0000-0xd7ffffff] [ 0.284475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.284679] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.286745] Switching to clocksource hpet [ 0.288648] pnp: PnP ACPI init [ 0.288701] ACPI: bus type pnp registered [ 0.288804] pnp 00:00: [bus 00-3f] [ 0.288807] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.288809] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.288811] pnp 00:00: [io 0x0d00-0xffff window] [ 0.288813] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.288815] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.288817] pnp 00:00: [mem 0xd7c00000-0xfebfffff window] [ 0.288854] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.288940] pnp 00:01: [io 0x0010-0x001f] [ 0.288942] pnp 00:01: [io 0x0022-0x003f] [ 0.288944] pnp 00:01: [io 0x0044-0x005f] [ 0.288946] pnp 00:01: [io 0x0062-0x0063] [ 0.288948] pnp 00:01: [io 0x0065-0x006f] [ 0.288949] pnp 00:01: [io 0x0074-0x007f] [ 0.288951] pnp 00:01: [io 0x0091-0x0093] [ 0.288953] pnp 00:01: [io 0x00a2-0x00bf] [ 0.288955] pnp 00:01: [io 0x00e0-0x00ef] [ 0.288957] pnp 00:01: [io 0x04d0-0x04d1] [ 0.288959] pnp 00:01: [io 0x0290-0x029f] [ 0.288961] pnp 00:01: [io 0x0800-0x087f] [ 0.288963] pnp 00:01: [io 0x0290-0x0294] [ 0.288965] pnp 00:01: [io 0x0880-0x088f] [ 0.289019] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.289069] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.289117] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.289166] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.289215] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.289263] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.289275] pnp 00:02: [dma 4] [ 0.289277] pnp 00:02: [io 0x0000-0x000f] [ 0.289279] pnp 00:02: [io 0x0080-0x0090] [ 0.289281] pnp 00:02: [io 0x0094-0x009f] [ 0.289282] pnp 00:02: [io 0x00c0-0x00df] [ 0.289308] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.289353] pnp 00:03: [irq 0 disabled] [ 0.289362] pnp 00:03: [irq 8] [ 0.289364] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.289389] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.289414] pnp 00:04: [io 0x0070-0x0073] [ 0.289441] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.289450] pnp 00:05: [io 0x0061] [ 0.289474] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.289483] pnp 00:06: [io 0x00f0-0x00ff] [ 0.289488] pnp 00:06: [irq 13] [ 0.289514] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.289720] pnp 00:07: [io 0x03f8-0x03ff] [ 0.289726] pnp 00:07: [irq 4] [ 0.289779] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.289833] pnp 00:08: [io 0x0400-0x04cf] [ 0.289835] pnp 00:08: [io 0x04d2-0x04ff] [ 0.289882] system 00:08: [io 0x0400-0x04cf] has been reserved [ 0.289931] system 00:08: [io 0x04d2-0x04ff] has been reserved [ 0.289979] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290154] pnp 00:09: [mem 0xf4000000-0xf7ffffff] [ 0.290209] system 00:09: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.290259] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290415] pnp 00:0a: [mem 0x000d3000-0x000d3fff] [ 0.290419] pnp 00:0a: [mem 0x000f0000-0x000f7fff] [ 0.290421] pnp 00:0a: [mem 0x000f8000-0x000fbfff] [ 0.290423] pnp 00:0a: [mem 0x000fc000-0x000fffff] [ 0.290425] pnp 00:0a: [mem 0xd7be0000-0xd7bfffff] [ 0.290427] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.290428] pnp 00:0a: [mem 0x00100000-0xd7bdffff] [ 0.290430] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.290432] pnp 00:0a: [mem 0xfed10000-0xfed1dfff] [ 0.290434] pnp 00:0a: [mem 0xfed20000-0xfed8ffff] [ 0.290436] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.290437] pnp 00:0a: [mem 0xffb00000-0xffb7ffff] [ 0.290439] pnp 00:0a: [mem 0xfff00000-0xffffffff] [ 0.290441] pnp 00:0a: [mem 0x000e0000-0x000effff] [ 0.290507] system 00:0a: [mem 0x000d3000-0x000d3fff] has been reserved [ 0.290557] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.290607] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.290658] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.290708] system 00:0a: [mem 0xd7be0000-0xd7bfffff] could not be reserved [ 0.290758] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.290817] system 00:0a: [mem 0x00100000-0xd7bdffff] could not be reserved [ 0.290867] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.290917] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.290967] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.291016] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.291066] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.291116] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved [ 0.291166] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved [ 0.291217] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.291238] pnp 00:0b: [mem 0xffb80000-0xffbfffff] [ 0.291273] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active) [ 0.291278] pnp: PnP ACPI: found 12 devices [ 0.291321] ACPI: ACPI bus type pnp unregistered [ 0.298089] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000 [ 0.298101] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000 [ 0.298105] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000 [ 0.298118] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.298120] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.298123] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.298127] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd7c00000-0xd7dfffff 64bit pref] [ 0.298196] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd7e00000-0xd7ffffff 64bit pref] [ 0.298265] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd8000000-0xd80fffff pref] [ 0.298331] pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff] [ 0.298380] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.298427] pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.298479] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.298526] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.298575] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.298626] pci 0000:00:1c.0: bridge window [mem 0xd7c00000-0xd7dfffff 64bit pref] [ 0.298696] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref] [ 0.298762] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.298814] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.298863] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.298914] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.298984] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.299030] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.299080] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.299131] pci 0000:00:1c.2: bridge window [mem 0xd7e00000-0xd7ffffff 64bit pref] [ 0.299203] pci 0000:05:02.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref] [ 0.299269] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.299315] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.299365] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.299415] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xd80fffff pref] [ 0.299504] pci 0000:00:1c.2: enabling device (0006 -> 0007) [ 0.299559] pci 0000:00:1e.0: setting latency timer to 64 [ 0.299563] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.299565] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.299567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.299568] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.299570] pci_bus 0000:00: resource 8 [mem 0xd7c00000-0xfebfffff] [ 0.299572] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.299574] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.299576] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff] [ 0.299578] pci_bus 0000:02: resource 2 [mem 0xd7c00000-0xd7dfffff 64bit pref] [ 0.299580] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.299582] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff] [ 0.299584] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.299586] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.299588] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.299590] pci_bus 0000:04: resource 2 [mem 0xd7e00000-0xd7ffffff 64bit pref] [ 0.299592] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.299593] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.299595] pci_bus 0000:05: resource 2 [mem 0xd8000000-0xd80fffff pref] [ 0.299597] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.299599] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.299601] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.299603] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.299605] pci_bus 0000:05: resource 8 [mem 0xd7c00000-0xfebfffff] [ 0.299607] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.299609] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.299673] NET: Registered protocol family 2 [ 0.299829] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.300596] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.302815] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.303122] TCP: Hash tables configured (established 524288 bind 65536) [ 0.303172] TCP: reno registered [ 0.303220] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.303294] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.303472] NET: Registered protocol family 1 [ 0.303533] pci 0000:00:02.0: Boot video device [ 0.334905] PCI: CLS 64 bytes, default 64 [ 0.334949] Unpacking initramfs... [ 0.548458] Freeing initrd memory: 12556k freed [ 0.550831] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.550893] software IO TLB [mem 0xd3bda000-0xd7bd9fff] (64MB) mapped at [ffff8800d3bda000-ffff8800d7bd9fff] [ 0.551510] audit: initializing netlink socket (disabled) [ 0.551580] type=2000 audit(1346165266.440:1): initialized [ 0.567687] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.568502] VFS: Disk quotas dquot_6.5.2 [ 0.568573] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.568701] msgmni has been set to 7415 [ 0.569121] alg: No test for stdrng (krng) [ 0.569199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.569278] io scheduler noop registered [ 0.569326] io scheduler deadline registered [ 0.569392] io scheduler cfq registered (default) [ 0.569565] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.569788] intel_idle: MWAIT substates: 0x1120 [ 0.569789] intel_idle: v0.4 model 0x25 [ 0.569790] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.569839] GHES: HEST is not enabled! [ 0.569933] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.590344] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.610972] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.611277] Linux agpgart interface v0.103 [ 0.611414] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 0.611519] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.612258] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.612465] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.612643] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.645092] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 0.645171] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 0.894728] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.894886] mousedev: PS/2 mouse device common for all mice [ 0.894966] rtc_cmos 00:04: RTC can wake from S4 [ 0.895140] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.895220] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.895352] cpuidle: using governor ladder [ 0.895482] cpuidle: using governor menu [ 0.895571] drop_monitor: Initializing network drop monitor service [ 0.895698] TCP: cubic registered [ 0.895866] NET: Registered protocol family 10 [ 0.896217] mip6: Mobile IPv6 [ 0.896263] NET: Registered protocol family 17 [ 0.896323] Key type dns_resolver registered [ 0.896403] TuxOnIce 3.3 (http://tuxonice.net) [ 0.896581] TuxOnIce: Ignoring late initcall, as requested. [ 0.896634] PM: Hibernation image not present or could not be loaded. [ 0.896643] registered taskstats version 1 [ 0.900298] Key type encrypted registered [ 0.904781] rtc_cmos 00:04: setting system clock to 2012-08-28 14:47:47 UTC (1346165267) [ 0.906076] Freeing unused kernel memory: 596k freed [ 0.906212] Write protecting the kernel read-only data: 6144k [ 0.907593] Freeing unused kernel memory: 348k freed [ 0.907974] Freeing unused kernel memory: 60k freed [ 0.927654] udevd[76]: starting version 175 [ 0.939784] ACPI: bus type usb registered [ 0.939875] usbcore: registered new interface driver usbfs [ 0.939943] usbcore: registered new interface driver hub [ 0.941583] usbcore: registered new device driver usb [ 0.946230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.946366] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.946370] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.946432] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.946537] ehci_hcd 0000:00:1a.7: debug port 2 [ 0.950476] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.950502] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000 [ 0.954772] SCSI subsystem initialized [ 0.957823] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.957993] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 0.958202] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9000065e000, 6c:f0:49:70:d9:29, XID 083000c0 IRQ 41 [ 0.958287] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.959148] libata version 3.00 loaded. [ 0.961431] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.961542] r8169 0000:05:02.0: (unregistered net_device): not PCI Express [ 0.961818] r8169 0000:05:02.0: eth1: RTL8169sb/8110sb at 0xffffc90000672000, 14:d6:4d:1c:a0:30, XID 10000000 IRQ 18 [ 0.961901] r8169 0000:05:02.0: eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 0.966627] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.966737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.966798] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.966874] usb usb1: Product: EHCI Host Controller [ 0.966927] usb usb1: Manufacturer: Linux 3.5.1+ ehci_hcd [ 0.966980] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.967266] hub 1-0:1.0: USB hub found [ 0.967322] hub 1-0:1.0: 6 ports detected [ 0.967534] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.967536] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.967539] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.967546] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.967580] ehci_hcd 0000:00:1d.7: debug port 2 [ 0.973520] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.973550] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000 [ 0.974955] uhci_hcd: USB Universal Host Controller Interface driver [ 0.976259] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 0.976632] xhci_hcd 0000:04:00.0: irq 18, io mem 0xfbdfe000 [ 0.976766] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X [ 0.976774] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 0.976781] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 0.978125] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 0.978132] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 0.978267] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.978328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.978406] usb usb3: Product: xHCI Host Controller [ 0.978458] usb usb3: Manufacturer: Linux 3.5.1+ xhci_hcd [ 0.978510] usb usb3: SerialNumber: 0000:04:00.0 [ 0.978676] xHCI xhci_add_endpoint called for root hub [ 0.978679] xHCI xhci_check_bandwidth called for root hub [ 0.978722] hub 3-0:1.0: USB hub found [ 0.978779] hub 3-0:1.0: 2 ports detected [ 0.978937] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.978994] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 0.979975] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.980050] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.980129] usb usb4: Product: xHCI Host Controller [ 0.980182] usb usb4: Manufacturer: Linux 3.5.1+ xhci_hcd [ 0.980237] usb usb4: SerialNumber: 0000:04:00.0 [ 0.980775] xHCI xhci_add_endpoint called for root hub [ 0.980778] xHCI xhci_check_bandwidth called for root hub [ 0.980817] hub 4-0:1.0: USB hub found [ 0.980879] hub 4-0:1.0: 2 ports detected [ 0.982620] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.982697] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.982755] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.982830] usb usb2: Product: EHCI Host Controller [ 0.982883] usb usb2: Manufacturer: Linux 3.5.1+ ehci_hcd [ 0.982934] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.983117] hub 2-0:1.0: USB hub found [ 0.983173] hub 2-0:1.0: 6 ports detected [ 0.983440] ahci 0000:00:1f.2: version 3.0 [ 0.983510] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X [ 0.983553] ahci: SSS flag set, parallel bus scan disabled [ 0.984890] pata_jmicron 0000:02:00.1: setting latency timer to 64 [ 0.985312] scsi0 : pata_jmicron [ 0.985576] scsi1 : pata_jmicron [ 0.986389] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17 [ 0.986451] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17 [ 0.998643] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.998732] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst [ 0.998827] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.038741] firewire_ohci 0000:05:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.039814] scsi2 : ahci [ 1.040114] scsi3 : ahci [ 1.040339] scsi4 : ahci [ 1.040489] scsi5 : ahci [ 1.040717] scsi6 : ahci [ 1.040882] scsi7 : ahci [ 1.041172] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 47 [ 1.041258] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 47 [ 1.041339] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 47 [ 1.041425] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 47 [ 1.041520] ata7: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 47 [ 1.041616] ata8: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 47 [ 1.041770] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.041779] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.041858] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5 [ 1.041985] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00 [ 1.042077] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.042134] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.042211] usb usb5: Product: UHCI Host Controller [ 1.042262] usb usb5: Manufacturer: Linux 3.5.1+ uhci_hcd [ 1.042316] usb usb5: SerialNumber: 0000:00:1a.0 [ 1.042563] hub 5-0:1.0: USB hub found [ 1.042632] hub 5-0:1.0: 2 ports detected [ 1.042766] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.042769] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.042821] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6 [ 1.042924] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00 [ 1.043000] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.043050] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.043122] usb usb6: Product: UHCI Host Controller [ 1.043177] usb usb6: Manufacturer: Linux 3.5.1+ uhci_hcd [ 1.043232] usb usb6: SerialNumber: 0000:00:1a.1 [ 1.043434] hub 6-0:1.0: USB hub found [ 1.043492] hub 6-0:1.0: 2 ports detected [ 1.043627] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.043631] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.043690] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7 [ 1.043794] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fc00 [ 1.043884] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.043939] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.044011] usb usb7: Product: UHCI Host Controller [ 1.044060] usb usb7: Manufacturer: Linux 3.5.1+ uhci_hcd [ 1.044115] usb usb7: SerialNumber: 0000:00:1a.2 [ 1.044320] hub 7-0:1.0: USB hub found [ 1.044378] hub 7-0:1.0: 2 ports detected [ 1.044552] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.044559] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.044624] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8 [ 1.044726] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00 [ 1.044835] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.044897] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.044975] usb usb8: Product: UHCI Host Controller [ 1.045026] usb usb8: Manufacturer: Linux 3.5.1+ uhci_hcd [ 1.045073] usb usb8: SerialNumber: 0000:00:1d.0 [ 1.045221] hub 8-0:1.0: USB hub found [ 1.045275] hub 8-0:1.0: 2 ports detected [ 1.045401] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.045404] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.045459] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9 [ 1.045569] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00 [ 1.045646] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.045699] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.045768] usb usb9: Product: UHCI Host Controller [ 1.045817] usb usb9: Manufacturer: Linux 3.5.1+ uhci_hcd [ 1.045877] usb usb9: SerialNumber: 0000:00:1d.1 [ 1.046063] hub 9-0:1.0: USB hub found [ 1.046117] hub 9-0:1.0: 2 ports detected [ 1.046243] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.046247] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.046300] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 [ 1.046402] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900 [ 1.046480] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.046534] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.046618] usb usb10: Product: UHCI Host Controller [ 1.046672] usb usb10: Manufacturer: Linux 3.5.1+ uhci_hcd [ 1.046727] usb usb10: SerialNumber: 0000:00:1d.2 [ 1.046882] hub 10-0:1.0: USB hub found [ 1.046932] hub 10-0:1.0: 2 ports detected [ 1.054693] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.054775] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.055278] scsi8 : ahci [ 1.055587] scsi9 : ahci [ 1.055832] ata9: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe100 irq 16 [ 1.055911] ata10: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe180 irq 16 [ 1.374586] ata10: SATA link down (SStatus 0 SControl 300) [ 1.378579] ata9: SATA link down (SStatus 0 SControl 300) [ 1.530521] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.532722] ata3.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 1.532783] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.535524] ata3.00: configured for UDMA/133 [ 1.535913] scsi 2:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 1.538637] firewire_core 0000:05:07.0: created device fw0: GUID 0034f1b4006cf049, S400 [ 1.550515] Refined TSC clocksource calibration: 2933.297 MHz. [ 1.552428] Switching to clocksource tsc [ 1.646489] usb 2-2: new high-speed USB device number 2 using ehci_hcd [ 1.783291] usb 2-2: New USB device found, idVendor=05e3, idProduct=0727 [ 1.783352] usb 2-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 1.783409] usb 2-2: Product: USB Storage [ 1.783458] usb 2-2: Manufacturer: Generic [ 1.783508] usb 2-2: SerialNumber: 000000000250 [ 1.787636] usbcore: registered new interface driver uas [ 2.022388] usb 7-1: new low-speed USB device number 2 using uhci_hcd [ 2.026428] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.029279] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 2.029339] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.031366] ata4.00: configured for UDMA/133 [ 2.031728] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 2.035263] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.035356] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.035514] sd 2:0:0:0: [sda] Write Protect is off [ 2.035573] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.035606] sd 3:0:0:0: [sdb] Write Protect is off [ 2.035626] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.035737] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.035775] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.080425] sdb: sdb1 [ 2.081350] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.092075] sda: sda1 [ 2.092969] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.225628] usb 7-1: New USB device found, idVendor=051d, idProduct=0002 [ 2.225688] usb 7-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.225746] usb 7-1: Product: Back-UPS ES 700G FW:871.O2 .I USB FW:O2 [ 2.225802] usb 7-1: Manufacturer: APC [ 2.225849] usb 7-1: SerialNumber: 5B1110T43110 [ 2.466274] usb 7-2: new low-speed USB device number 3 using uhci_hcd [ 2.522264] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.524894] ata5.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 2.524961] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.527368] ata5.00: configured for UDMA/133 [ 2.527713] scsi 4:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 2.527963] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.528198] sd 4:0:0:0: [sdc] Write Protect is off [ 2.528255] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.528323] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.532231] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.532363] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 2.532456] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2.576972] sdc: sdc1 [ 2.577688] sd 4:0:0:0: [sdc] Attached SCSI disk [ 2.643517] usb 7-2: New USB device found, idVendor=04f2, idProduct=0111 [ 2.643580] usb 7-2: New USB device strings: Mfr=4, Product=20, SerialNumber=0 [ 2.643659] usb 7-2: Product: USB Keyboard [ 2.643711] usb 7-2: Manufacturer: Chicony [ 3.018144] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.019878] ata6.00: ATA-8: ST31000524NS, SN12, max UDMA/133 [ 3.019938] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.021921] ata6.00: configured for UDMA/133 [ 3.022297] scsi 5:0:0:0: Direct-Access ATA ST31000524NS SN12 PQ: 0 ANSI: 5 [ 3.022512] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.022537] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 3.022755] sd 5:0:0:0: [sdd] Write Protect is off [ 3.022820] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.022959] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.059582] sdd: sdd1 [ 3.060209] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.342006] ata7: SATA link down (SStatus 0 SControl 300) [ 3.661954] ata8: SATA link down (SStatus 0 SControl 300) [ 3.664465] Initializing USB Mass Storage driver... [ 3.664851] scsi10 : usb-storage 2-2:1.0 [ 3.665012] usbcore: registered new interface driver usb-storage [ 3.665067] USB Mass Storage support registered. [ 3.869312] usbcore: registered new interface driver usbhid [ 3.869372] usbhid: USB HID core driver [ 3.909027] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.921333] md: raid10 personality registered for level 10 [ 3.926693] device-mapper: uevent: version 1.0.3 [ 3.926890] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.968656] md: md127 stopped. [ 3.970612] md: bind [ 3.970842] md: bind [ 3.971165] md: bind [ 3.971416] md: bind [ 3.973407] bio: create slab at 1 [ 3.973538] md/raid10:md127: active with 4 out of 4 devices [ 3.973608] md127: detected capacity change from 0 to 2000396746752 [ 3.975688] md127: unknown partition table [ 4.663191] scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0 [ 4.664752] sd 10:0:0:0: Attached scsi generic sg4 type 0 [ 5.010917] sd 10:0:0:0: [sde] 15661056 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 5.012449] sd 10:0:0:0: [sde] Write Protect is off [ 5.012506] sd 10:0:0:0: [sde] Mode Sense: 0b 00 00 08 [ 5.013921] sd 10:0:0:0: [sde] No Caching mode page present [ 5.013977] sd 10:0:0:0: [sde] Assuming drive cache: write through [ 5.018576] sd 10:0:0:0: [sde] No Caching mode page present [ 5.018637] sd 10:0:0:0: [sde] Assuming drive cache: write through [ 5.021546] sde: sde1 sde2 sde3 sde4 [ 5.025613] sd 10:0:0:0: [sde] No Caching mode page present [ 5.025677] sd 10:0:0:0: [sde] Assuming drive cache: write through [ 5.025740] sd 10:0:0:0: [sde] Attached SCSI removable disk [ 5.253481] kjournald starting. Commit interval 5 seconds [ 5.253496] EXT3-fs (sde2): mounted filesystem with ordered data mode [ 6.452914] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 7.660685] udevd[592]: starting version 175 [ 8.044261] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 8.044347] ACPI: Power Button [PWRB] [ 8.044484] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 8.044564] ACPI: Power Button [PWRF] [ 8.082330] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 8.102343] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \TCOI 1 (20120320/utaddress-251) [ 8.102476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.102561] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 8.102616] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120320/utaddress-251) [ 8.102740] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.102833] gpio_ich: failed to claim resource 0 [ 8.102879] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.107170] ACPI: Requesting acpi_cpufreq [ 8.152250] mei 0000:00:16.0: setting latency timer to 64 [ 8.152354] mei 0000:00:16.0: irq 48 for MSI/MSI-X [ 8.154254] [drm] Initialized drm 1.1.0 20060810 [ 8.177733] cfg80211: Calling CRDA to update world regulatory domain [ 8.252648] microcode: CPU0 sig=0x20652, pf=0x2, revision=0x9 [ 8.302972] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 8.304304] microcode: CPU1 sig=0x20652, pf=0x2, revision=0x9 [ 8.306589] microcode: CPU2 sig=0x20652, pf=0x2, revision=0x9 [ 8.310876] microcode: CPU3 sig=0x20652, pf=0x2, revision=0x9 [ 8.313541] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.406759] i915 0000:00:02.0: setting latency timer to 64 [ 8.424174] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 8.424184] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.424236] [drm] Driver supports precise vblank timestamp query. [ 8.424329] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.511193] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350a] [ 8.538845] ath: EEPROM regdomain: 0x30 [ 8.538849] ath: EEPROM indicates we should expect a direct regpair map [ 8.538852] ath: Country alpha2 being used: AM [ 8.538853] ath: Regpair used: 0x30 [ 8.545201] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 8.545404] Registered led device: ath9k-phy0 [ 8.545409] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc900050a0000, irq=16 [ 8.608432] cfg80211: World regulatory domain updated: [ 8.608590] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.608674] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.608747] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.608819] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.608890] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.608962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.609045] cfg80211: Calling CRDA for country: AM [ 8.613532] cfg80211: Regulatory domain changed to country: AM [ 8.613587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.613661] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.613732] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 8.613802] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 8.706108] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 700G FW:871.O2 .I USB FW:O2 ] on usb-0000:00:1a.2-1/input0 [ 8.706591] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.0/input/input3 [ 8.706869] hid-generic 0003:04F2:0111.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1a.2-2/input0 [ 8.720940] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.1/input/input4 [ 8.721223] hid-generic 0003:04F2:0111.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1a.2-2/input1 [ 9.232969] fbcon: inteldrmfb (fb0) is primary device [ 9.521028] Console: switching to colour frame buffer device 170x48 [ 9.524128] fb0: inteldrmfb frame buffer device [ 9.524129] drm: registered panic notifier [ 9.524243] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.120793] Adding 4194300k swap on /dev/mapper/castle.stg01-deb64.swap. Priority:-1 extents:1 across:4194300k [ 10.143869] EXT4-fs (dm-7): re-mounted. Opts: (null) [ 10.364883] EXT4-fs (dm-7): re-mounted. Opts: (null) [ 10.571300] fuse init (API version 7.19) [ 10.692676] it87: Found IT8720F chip at 0x290, revision 8 [ 10.692717] it87: VID is disabled (pins used for GPIO) [ 10.692759] it87: Routing internal VCCH to in7 [ 10.692794] it87: Beeping is supported [ 13.107742] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 13.132792] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 13.191012] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 14.079705] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 15.053908] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 15.946170] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.963309] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 16.334604] tun: Universal TUN/TAP device driver, 1.6 [ 16.335772] tun: (C) 1999-2004 Max Krasnyansky [ 16.374097] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready [ 16.436761] IPv6: ADDRCONF(NETDEV_UP): tap1: link is not ready [ 16.521710] Bridge firewalling registered [ 16.540104] device lan0 entered promiscuous mode [ 16.622107] r8169 0000:03:00.0: lan0: link down [ 16.622123] r8169 0000:03:00.0: lan0: link down [ 16.624857] IPv6: ADDRCONF(NETDEV_UP): lan0: link is not ready [ 16.627041] device tap0 entered promiscuous mode [ 16.630148] device tap1 entered promiscuous mode [ 16.635744] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 18.801331] r8169 0000:03:00.0: lan0: link up [ 18.803980] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready [ 18.807147] br0: port 1(lan0) entered forwarding state [ 18.809368] br0: port 1(lan0) entered forwarding state [ 18.812283] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 19.123361] r8169 0000:05:02.0: wan0: link down [ 19.123448] r8169 0000:05:02.0: wan0: link down [ 19.128554] IPv6: ADDRCONF(NETDEV_UP): wan0: link is not ready [ 19.805514] br0: port 1(lan0) entered forwarding state [ 20.647490] r8169 0000:05:02.0: wan0: link up [ 20.649939] IPv6: ADDRCONF(NETDEV_CHANGE): wan0: link becomes ready [ 26.440306] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.442759] cfg80211: Calling CRDA for country: UA [ 26.450880] cfg80211: Regulatory domain changed to country: UA [ 26.452069] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.453248] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 26.507057] IPv6: ADDRCONF(NETDEV_UP): tap10: link is not ready [ 26.964579] RPC: Registered named UNIX socket transport module. [ 26.965732] RPC: Registered udp transport module. [ 26.966880] RPC: Registered tcp transport module. [ 26.968074] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 27.023224] FS-Cache: Loaded [ 27.052968] NFS: Registering the id_resolver key type [ 27.055431] Key type id_resolver registered [ 27.057870] Key type id_legacy registered [ 27.060369] FS-Cache: Netfs 'nfs' registered for caching [ 27.075892] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 28.140807] 8021q: 802.1Q VLAN Support v1.8 [ 28.143998] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 28.298867] vboxdrv: Found 4 processor cores. [ 28.299278] vboxdrv: fAsync=0 offMin=0x4f5 offMax=0x53ca [ 28.301713] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 28.302948] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000). [ 28.439557] vboxpci: IOMMU not found (not registered) [ 31.728017] IPv6: ADDRCONF(NETDEV_CHANGE): tap0: link becomes ready [ 31.729575] br0: port 2(tap0) entered forwarding state [ 31.731701] br0: port 2(tap0) entered forwarding state [ 31.793891] IPv6: ADDRCONF(NETDEV_CHANGE): tap1: link becomes ready [ 31.795199] br0: port 3(tap1) entered forwarding state [ 31.796804] br0: port 3(tap1) entered forwarding state [ 32.730076] br0: port 2(tap0) entered forwarding state [ 32.794048] br0: port 3(tap1) entered forwarding state [ 35.944455] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 36.005932] NFSD: starting 90-second grace period [ 40.581264] postgres (4695): /proc/4695/oom_adj is deprecated, please use /proc/4695/oom_score_adj instead.