[ 546.044] X.Org X Server 1.12.4 Release Date: 2012-08-27 [ 546.044] X Protocol Version 11, Revision 0 [ 546.044] Build Operating System: Linux 3.4.8-1-ARCH x86_64 [ 546.044] Current Operating System: Linux silverstar 3.6.0-1-mainline #1 SMP PREEMPT Mon Oct 1 20:29:53 EDT 2012 x86_64 [ 546.044] Kernel command line: BOOT_IMAGE=mainline ro root=801 [ 546.044] Build Date: 27 August 2012 08:04:39AM [ 546.044] [ 546.044] Current version of pixman: 0.26.2 [ 546.045] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 546.045] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 546.045] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 4 17:33:21 2012 [ 546.045] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 546.045] (==) No Layout section. Using the first Screen section. [ 546.045] (==) No screen section available. Using defaults. [ 546.045] (**) |-->Screen "Default Screen Section" (0) [ 546.045] (**) | |-->Monitor "" [ 546.046] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 546.046] (**) | |-->Device "Intel Graphics" [ 546.046] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 546.046] (==) Automatically adding devices [ 546.046] (==) Automatically enabling devices [ 546.046] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 546.046] Entry deleted from font path. [ 546.046] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 546.046] Entry deleted from font path. [ 546.046] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 546.046] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 546.046] Entry deleted from font path. [ 546.046] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 546.046] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/ [ 546.046] (==) ModulePath set to "/usr/lib/xorg/modules" [ 546.046] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 546.046] (II) Loader magic: 0x7c8b00 [ 546.046] (II) Module ABI versions: [ 546.046] X.Org ANSI C Emulation: 0.4 [ 546.046] X.Org Video Driver: 12.1 [ 546.046] X.Org XInput driver : 16.0 [ 546.046] X.Org Server Extension : 6.0 [ 546.047] (--) PCI:*(0:0:2:0) 8086:0046:1025:047e rev 2, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00004050/8 [ 546.047] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 546.047] (II) LoadModule: "extmod" [ 546.048] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 546.048] (II) Module extmod: vendor="X.Org Foundation" [ 546.048] compiled for 1.12.4, module version = 1.0.0 [ 546.048] Module class: X.Org Server Extension [ 546.048] ABI class: X.Org Server Extension, version 6.0 [ 546.048] (II) Loading extension MIT-SCREEN-SAVER [ 546.048] (II) Loading extension XFree86-VidModeExtension [ 546.048] (II) Loading extension XFree86-DGA [ 546.048] (II) Loading extension DPMS [ 546.048] (II) Loading extension XVideo [ 546.048] (II) Loading extension XVideo-MotionCompensation [ 546.048] (II) Loading extension X-Resource [ 546.048] (II) LoadModule: "dbe" [ 546.048] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 546.048] (II) Module dbe: vendor="X.Org Foundation" [ 546.048] compiled for 1.12.4, module version = 1.0.0 [ 546.048] Module class: X.Org Server Extension [ 546.048] ABI class: X.Org Server Extension, version 6.0 [ 546.049] (II) Loading extension DOUBLE-BUFFER [ 546.049] (II) LoadModule: "glx" [ 546.049] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 546.049] (II) Module glx: vendor="X.Org Foundation" [ 546.049] compiled for 1.12.4, module version = 1.0.0 [ 546.049] ABI class: X.Org Server Extension, version 6.0 [ 546.049] (==) AIGLX enabled [ 546.049] (II) Loading extension GLX [ 546.049] (II) LoadModule: "record" [ 546.049] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 546.049] (II) Module record: vendor="X.Org Foundation" [ 546.049] compiled for 1.12.4, module version = 1.13.0 [ 546.049] Module class: X.Org Server Extension [ 546.049] ABI class: X.Org Server Extension, version 6.0 [ 546.049] (II) Loading extension RECORD [ 546.049] (II) LoadModule: "dri" [ 546.050] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 546.050] (II) Module dri: vendor="X.Org Foundation" [ 546.050] compiled for 1.12.4, module version = 1.0.0 [ 546.050] ABI class: X.Org Server Extension, version 6.0 [ 546.050] (II) Loading extension XFree86-DRI [ 546.050] (II) LoadModule: "dri2" [ 546.050] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 546.050] (II) Module dri2: vendor="X.Org Foundation" [ 546.050] compiled for 1.12.4, module version = 1.2.0 [ 546.050] ABI class: X.Org Server Extension, version 6.0 [ 546.050] (II) Loading extension DRI2 [ 546.050] (II) LoadModule: "intel" [ 546.050] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 546.051] (II) Module intel: vendor="X.Org Foundation" [ 546.051] compiled for 1.12.4, module version = 2.20.9 [ 546.051] Module class: X.Org Video Driver [ 546.051] ABI class: X.Org Video Driver, version 12.1 [ 546.051] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 546.052] (--) using VT number 7 [ 546.059] drmOpenDevice: node name is /dev/dri/card0 [ 546.059] drmOpenDevice: open result is 7, (OK) [ 546.059] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 546.059] drmOpenDevice: node name is /dev/dri/card0 [ 546.059] drmOpenDevice: open result is 7, (OK) [ 546.059] drmOpenByBusid: drmOpenMinor returns 7 [ 546.059] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 546.059] drmOpenDevice: node name is /dev/dri/card0 [ 546.059] drmOpenDevice: open result is 8, (OK) [ 546.059] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 546.059] drmOpenDevice: node name is /dev/dri/card0 [ 546.059] drmOpenDevice: open result is 8, (OK) [ 546.059] drmOpenByBusid: drmOpenMinor returns 8 [ 546.060] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 546.060] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 546.060] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 546.060] (==) intel(0): RGB weight 888 [ 546.060] (==) intel(0): Default visual is TrueColor [ 546.060] (**) intel(0): Option "AccelMethod" "sna" [ 546.060] (**) intel(0): Option "TearFree" "true" [ 546.060] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale [ 546.060] (**) intel(0): Framebuffer tiled [ 546.060] (**) intel(0): Pixmaps tiled [ 546.060] (**) intel(0): 3D buffers tiled [ 546.060] (**) intel(0): Throttling enabled [ 546.060] (**) intel(0): Delayed flush enabled [ 546.060] (**) intel(0): "Tear free" enabled [ 546.060] (**) intel(0): Forcing per-crtc-pixmaps? no [ 546.060] (II) intel(0): Output LVDS1 has no monitor section [ 546.066] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware') [ 546.080] (II) intel(0): Output VGA1 has no monitor section [ 546.130] (II) intel(0): Output LVDS2 has no monitor section [ 546.136] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware') [ 546.150] (II) intel(0): Output HDMI1 has no monitor section [ 546.190] (II) intel(0): Output DP1 has no monitor section [ 546.190] (II) intel(0): EDID for output LVDS1 [ 546.190] (II) intel(0): Manufacturer: AUO Model: 303c Serial#: 1 [ 546.190] (II) intel(0): Year: 2009 Week: 1 [ 546.190] (II) intel(0): EDID Version: 1.3 [ 546.190] (II) intel(0): Digital Display Input [ 546.190] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 546.190] (II) intel(0): Gamma: 2.20 [ 546.190] (II) intel(0): No DPMS capabilities specified [ 546.190] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 546.190] (II) intel(0): First detailed timing is preferred mode [ 546.190] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570 [ 546.190] (II) intel(0): blueX: 0.150 blueY: 0.600 whiteX: 0.313 whiteY: 0.329 [ 546.190] (II) intel(0): Manufacturer's mask: 0 [ 546.190] (II) intel(0): Supported detailed timing: [ 546.190] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm [ 546.190] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0 [ 546.190] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0 [ 546.190] (II) intel(0): Unknown vendor-specific block f [ 546.190] (II) intel(0): AUO [ 546.190] (II) intel(0): B140XW03 V0 [ 546.190] (II) intel(0): EDID (in hex): [ 546.190] (II) intel(0): 00ffffffffffff0006af3c3001000000 [ 546.190] (II) intel(0): 01130103801f11780ac8a59e57549226 [ 546.190] (II) intel(0): 99505400000001010101010101010101 [ 546.190] (II) intel(0): 010101010101121b5646500023302616 [ 546.190] (II) intel(0): 360035ad100000180000000f00000000 [ 546.190] (II) intel(0): 00000000000000000020000000fe0041 [ 546.190] (II) intel(0): 554f0a202020202020202020000000fe [ 546.190] (II) intel(0): 004231343058573033205630200a0004 [ 546.190] (II) intel(0): EDID vendor "AUO", prod id 12348 [ 546.190] (II) intel(0): Printing DDC gathered Modelines: [ 546.190] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP) [ 546.190] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 546.190] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 546.190] (II) intel(0): Printing probed modes for output LVDS1 [ 546.190] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP) [ 546.190] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 546.190] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 546.190] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 546.190] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 546.203] (II) intel(0): EDID for output VGA1 [ 546.253] (II) intel(0): EDID for output LVDS2 [ 546.253] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 546.253] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 546.253] (II) intel(0): Printing probed modes for output LVDS2 [ 546.253] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP) [ 546.253] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 546.253] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 546.253] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 546.253] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 546.266] (II) intel(0): EDID for output HDMI1 [ 546.306] (II) intel(0): EDID for output DP1 [ 546.306] (II) intel(0): Output LVDS1 connected [ 546.306] (II) intel(0): Output VGA1 disconnected [ 546.306] (II) intel(0): Output LVDS2 connected [ 546.306] (II) intel(0): Output HDMI1 disconnected [ 546.306] (II) intel(0): Output DP1 disconnected [ 546.306] (II) intel(0): Using exact sizes for initial modes [ 546.306] (II) intel(0): Output LVDS1 using initial mode 1366x768 [ 546.306] (II) intel(0): Output LVDS2 using initial mode 1366x768 [ 546.306] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 546.306] (**) intel(0): Display dimensions: (310, 170) mm [ 546.306] (**) intel(0): DPI set to (111, 114) [ 546.306] (II) Loading sub module "dri2" [ 546.306] (II) LoadModule: "dri2" [ 546.307] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 546.307] (II) Module dri2: vendor="X.Org Foundation" [ 546.307] compiled for 1.12.4, module version = 1.2.0 [ 546.307] ABI class: X.Org Server Extension, version 6.0 [ 546.307] (==) Depth 24 pixmap format is 32 bpp [ 546.307] (II) intel(0): SNA initialized with Ironlake backend [ 546.307] (==) intel(0): Backing store disabled [ 546.307] (==) intel(0): Silken mouse enabled [ 546.307] (II) intel(0): HW Cursor enabled [ 546.307] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 546.314] (==) intel(0): DPMS enabled [ 546.314] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 546.314] (II) intel(0): [DRI2] Setup complete [ 546.314] (II) intel(0): [DRI2] DRI driver: i965 [ 546.314] (II) intel(0): direct rendering: DRI2 Enabled [ 546.314] (==) intel(0): hotplug detection: "enabled" [ 546.314] (--) RandR disabled [ 546.314] (II) Initializing built-in extension Generic Event Extension [ 546.314] (II) Initializing built-in extension SHAPE [ 546.314] (II) Initializing built-in extension MIT-SHM [ 546.314] (II) Initializing built-in extension XInputExtension [ 546.314] (II) Initializing built-in extension XTEST [ 546.314] (II) Initializing built-in extension BIG-REQUESTS [ 546.314] (II) Initializing built-in extension SYNC [ 546.314] (II) Initializing built-in extension XKEYBOARD [ 546.314] (II) Initializing built-in extension XC-MISC [ 546.314] (II) Initializing built-in extension SECURITY [ 546.314] (II) Initializing built-in extension XINERAMA [ 546.314] (II) Initializing built-in extension XFIXES [ 546.314] (II) Initializing built-in extension RENDER [ 546.314] (II) Initializing built-in extension RANDR [ 546.314] (II) Initializing built-in extension COMPOSITE [ 546.314] (II) Initializing built-in extension DAMAGE [ 546.327] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 546.327] (II) AIGLX: enabled GLX_INTEL_swap_event [ 546.327] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 546.327] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 546.328] (II) AIGLX: Loaded and initialized i965 [ 546.328] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 546.328] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0) [ 546.400] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1) [ 546.754] (II) intel(0): Setting screen physical size to 361 x 203 [ 546.799] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 546.799] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 546.799] (II) LoadModule: "evdev" [ 546.799] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 546.800] (II) Module evdev: vendor="X.Org Foundation" [ 546.800] compiled for 1.12.3.901, module version = 2.7.3 [ 546.800] Module class: X.Org XInput Driver [ 546.800] ABI class: X.Org XInput driver, version 16.0 [ 546.800] (II) Using input driver 'evdev' for 'Power Button' [ 546.800] (**) Power Button: always reports core events [ 546.800] (**) evdev: Power Button: Device: "/dev/input/event5" [ 546.800] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 546.800] (--) evdev: Power Button: Found keys [ 546.800] (II) evdev: Power Button: Configuring as keyboard [ 546.800] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 546.800] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 546.800] (**) Option "xkb_rules" "evdev" [ 546.800] (**) Option "xkb_model" "evdev" [ 546.800] (**) Option "xkb_layout" "us" [ 546.827] (II) config/udev: Adding input device Video Bus (/dev/input/event17) [ 546.827] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 546.827] (II) Using input driver 'evdev' for 'Video Bus' [ 546.828] (**) Video Bus: always reports core events [ 546.828] (**) evdev: Video Bus: Device: "/dev/input/event17" [ 546.828] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 546.828] (--) evdev: Video Bus: Found keys [ 546.828] (II) evdev: Video Bus: Configuring as keyboard [ 546.828] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input17/event17" [ 546.828] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 546.828] (**) Option "xkb_rules" "evdev" [ 546.828] (**) Option "xkb_model" "evdev" [ 546.828] (**) Option "xkb_layout" "us" [ 546.828] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 546.828] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 546.828] (II) Using input driver 'evdev' for 'Power Button' [ 546.829] (**) Power Button: always reports core events [ 546.829] (**) evdev: Power Button: Device: "/dev/input/event2" [ 546.829] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 546.829] (--) evdev: Power Button: Found keys [ 546.829] (II) evdev: Power Button: Configuring as keyboard [ 546.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input2/event2" [ 546.829] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 546.829] (**) Option "xkb_rules" "evdev" [ 546.829] (**) Option "xkb_model" "evdev" [ 546.829] (**) Option "xkb_layout" "us" [ 546.829] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 546.829] (II) No input driver specified, ignoring this device. [ 546.830] (II) This device may have been added with another device file. [ 546.830] (II) config/udev: Adding input device Sleep Button (/dev/input/event4) [ 546.830] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 546.830] (II) Using input driver 'evdev' for 'Sleep Button' [ 546.830] (**) Sleep Button: always reports core events [ 546.830] (**) evdev: Sleep Button: Device: "/dev/input/event4" [ 546.830] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 546.830] (--) evdev: Sleep Button: Found keys [ 546.830] (II) evdev: Sleep Button: Configuring as keyboard [ 546.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input4/event4" [ 546.830] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 546.830] (**) Option "xkb_rules" "evdev" [ 546.830] (**) Option "xkb_model" "evdev" [ 546.830] (**) Option "xkb_layout" "us" [ 546.831] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13) [ 546.831] (II) No input driver specified, ignoring this device. [ 546.831] (II) This device may have been added with another device file. [ 546.831] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event14) [ 546.831] (II) No input driver specified, ignoring this device. [ 546.831] (II) This device may have been added with another device file. [ 546.832] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event15) [ 546.832] (II) No input driver specified, ignoring this device. [ 546.832] (II) This device may have been added with another device file. [ 546.832] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event16) [ 546.832] (II) No input driver specified, ignoring this device. [ 546.832] (II) This device may have been added with another device file. [ 546.832] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event1) [ 546.832] (**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall" [ 546.832] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025' [ 546.832] (**) Logitech Unifying Device. Wireless PID:1025: always reports core events [ 546.833] (**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event1" [ 546.833] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b [ 546.833] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons [ 546.833] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s) [ 546.833] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes [ 546.833] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes [ 546.833] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse [ 546.833] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support [ 546.833] (**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5 [ 546.833] (**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 546.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/input/input1/event1" [ 546.833] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 10) [ 546.833] (II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes. [ 546.833] (**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1 [ 546.833] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0 [ 546.833] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000 [ 546.833] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4 [ 546.834] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0) [ 546.834] (II) No input driver specified, ignoring this device. [ 546.834] (II) This device may have been added with another device file. [ 546.834] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event18) [ 546.834] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall" [ 546.834] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002' [ 546.834] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events [ 546.834] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event18" [ 546.834] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b [ 546.834] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons [ 546.834] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s) [ 546.834] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes [ 546.834] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist. [ 546.834] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes [ 546.834] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist. [ 546.834] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys [ 546.834] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse [ 546.834] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard [ 546.834] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support [ 546.835] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5 [ 546.835] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 546.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/input/input18/event18" [ 546.835] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 11) [ 546.835] (**) Option "xkb_rules" "evdev" [ 546.835] (**) Option "xkb_model" "evdev" [ 546.835] (**) Option "xkb_layout" "us" [ 546.835] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes. [ 546.835] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes. [ 546.835] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1 [ 546.835] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0 [ 546.835] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000 [ 546.835] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4 [ 546.836] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01002 (/dev/input/event7) [ 546.836] (**) Cypress Semiconductor CYTCB4S-01002: Applying InputClass "evdev touchscreen catchall" [ 546.836] (II) Using input driver 'evdev' for 'Cypress Semiconductor CYTCB4S-01002' [ 546.836] (**) Cypress Semiconductor CYTCB4S-01002: always reports core events [ 546.836] (**) evdev: Cypress Semiconductor CYTCB4S-01002: Device: "/dev/input/event7" [ 546.836] (--) evdev: Cypress Semiconductor CYTCB4S-01002: Vendor 0x4b4 Product 0xc001 [ 546.836] (--) evdev: Cypress Semiconductor CYTCB4S-01002: Found absolute axes [ 546.836] (--) evdev: Cypress Semiconductor CYTCB4S-01002: Found absolute multitouch axes [ 546.836] (--) evdev: Cypress Semiconductor CYTCB4S-01002: Found x and y absolute axes [ 546.836] (--) evdev: Cypress Semiconductor CYTCB4S-01002: Found absolute touchscreen [ 546.836] (II) evdev: Cypress Semiconductor CYTCB4S-01002: Configuring as touchscreen [ 546.836] (**) evdev: Cypress Semiconductor CYTCB4S-01002: YAxisMapping: buttons 4 and 5 [ 546.836] (**) evdev: Cypress Semiconductor CYTCB4S-01002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 546.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input7/event7" [ 546.836] (II) XINPUT: Adding extended input device "Cypress Semiconductor CYTCB4S-01002" (type: TOUCHSCREEN, id 12) [ 546.836] (II) evdev: Cypress Semiconductor CYTCB4S-01002: initialized for absolute axes. [ 546.836] (**) Cypress Semiconductor CYTCB4S-01002: (accel) keeping acceleration scheme 1 [ 546.836] (**) Cypress Semiconductor CYTCB4S-01002: (accel) acceleration profile 0 [ 546.836] (**) Cypress Semiconductor CYTCB4S-01002: (accel) acceleration factor: 2.000 [ 546.836] (**) Cypress Semiconductor CYTCB4S-01002: (accel) acceleration threshold: 4 [ 546.837] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01002 (/dev/input/mouse1) [ 546.837] (II) No input driver specified, ignoring this device. [ 546.837] (II) This device may have been added with another device file. [ 546.837] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01002 (/dev/input/event8) [ 546.837] (II) No input driver specified, ignoring this device. [ 546.837] (II) This device may have been added with another device file. [ 546.837] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01001 (/dev/input/event9) [ 546.837] (**) Cypress Semiconductor CYTCB4S-01001: Applying InputClass "evdev touchscreen catchall" [ 546.837] (II) Using input driver 'evdev' for 'Cypress Semiconductor CYTCB4S-01001' [ 546.837] (**) Cypress Semiconductor CYTCB4S-01001: always reports core events [ 546.837] (**) evdev: Cypress Semiconductor CYTCB4S-01001: Device: "/dev/input/event9" [ 546.837] (--) evdev: Cypress Semiconductor CYTCB4S-01001: Vendor 0x4b4 Product 0xc001 [ 546.837] (--) evdev: Cypress Semiconductor CYTCB4S-01001: Found absolute axes [ 546.837] (--) evdev: Cypress Semiconductor CYTCB4S-01001: Found absolute multitouch axes [ 546.837] (--) evdev: Cypress Semiconductor CYTCB4S-01001: Found x and y absolute axes [ 546.837] (--) evdev: Cypress Semiconductor CYTCB4S-01001: Found absolute touchscreen [ 546.837] (II) evdev: Cypress Semiconductor CYTCB4S-01001: Configuring as touchscreen [ 546.837] (**) evdev: Cypress Semiconductor CYTCB4S-01001: YAxisMapping: buttons 4 and 5 [ 546.837] (**) evdev: Cypress Semiconductor CYTCB4S-01001: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 546.837] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input9/event9" [ 546.837] (II) XINPUT: Adding extended input device "Cypress Semiconductor CYTCB4S-01001" (type: TOUCHSCREEN, id 13) [ 546.837] (II) evdev: Cypress Semiconductor CYTCB4S-01001: initialized for absolute axes. [ 546.837] (**) Cypress Semiconductor CYTCB4S-01001: (accel) keeping acceleration scheme 1 [ 546.837] (**) Cypress Semiconductor CYTCB4S-01001: (accel) acceleration profile 0 [ 546.837] (**) Cypress Semiconductor CYTCB4S-01001: (accel) acceleration factor: 2.000 [ 546.837] (**) Cypress Semiconductor CYTCB4S-01001: (accel) acceleration threshold: 4 [ 546.837] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01001 (/dev/input/mouse2) [ 546.837] (II) No input driver specified, ignoring this device. [ 546.837] (II) This device may have been added with another device file. [ 546.838] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01001 (/dev/input/event10) [ 546.838] (II) No input driver specified, ignoring this device. [ 546.838] (II) This device may have been added with another device file. [ 546.838] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 546.838] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 546.838] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 546.838] (**) AT Translated Set 2 keyboard: always reports core events [ 546.838] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 546.838] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 546.838] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 546.838] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 546.838] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 546.838] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14) [ 546.838] (**) Option "xkb_rules" "evdev" [ 546.838] (**) Option "xkb_model" "evdev" [ 546.838] (**) Option "xkb_layout" "us" [ 546.838] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 546.838] (II) No input driver specified, ignoring this device. [ 546.838] (II) This device may have been added with another device file. [ 546.839] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event11) [ 546.839] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 546.839] (II) Using input driver 'evdev' for 'Acer WMI hotkeys' [ 546.839] (**) Acer WMI hotkeys: always reports core events [ 546.839] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event11" [ 546.839] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0 [ 546.839] (--) evdev: Acer WMI hotkeys: Found keys [ 546.839] (II) evdev: Acer WMI hotkeys: Configuring as keyboard [ 546.839] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11" [ 546.839] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15) [ 546.839] (**) Option "xkb_rules" "evdev" [ 546.839] (**) Option "xkb_model" "evdev" [ 546.839] (**) Option "xkb_layout" "us" [ 546.839] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event12) [ 546.839] (II) No input driver specified, ignoring this device. [ 546.839] (II) This device may have been added with another device file. [ 546.839] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0) [ 546.839] (II) No input driver specified, ignoring this device. [ 546.839] (II) This device may have been added with another device file. [ 548.403] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1) [ 548.421] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0) [ 548.453] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1) [ 548.482] [ 548.482] Backtrace: [ 548.482] 0: /usr/bin/X (xorg_backtrace+0x36) [0x560366] [ 548.482] 1: /usr/bin/X (0x400000+0x1640c9) [0x5640c9] [ 548.482] 2: /usr/lib/libpthread.so.0 (0x7f1224021000+0xf170) [0x7f1224030170] [ 548.482] 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1220ff8000+0xada32) [0x7f12210a5a32] [ 548.482] 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1220ff8000+0xb39a8) [0x7f12210ab9a8] [ 548.482] 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1220ff8000+0x6b0d8) [0x7f12210630d8] [ 548.482] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1220ff8000+0x5cb27) [0x7f1221054b27] [ 548.482] 7: /usr/bin/X (BlockHandler+0x4a) [0x4382da] [ 548.482] 8: /usr/bin/X (WaitForSomething+0x114) [0x55d714] [ 548.482] 9: /usr/bin/X (0x400000+0x34281) [0x434281] [ 548.482] 10: /usr/bin/X (0x400000+0x23615) [0x423615] [ 548.482] 11: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f1222ecd725] [ 548.482] 12: /usr/bin/X (0x400000+0x238ed) [0x4238ed] [ 548.482] [ 548.482] Segmentation fault at address (nil) [ 548.482] Fatal server error: [ 548.482] Caught signal 11 (Segmentation fault). Server aborting [ 548.482] [ 548.482] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 548.482] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 548.482] [ 548.483] (II) evdev: Power Button: Close [ 548.483] (II) UnloadModule: "evdev" [ 548.483] (II) evdev: Video Bus: Close [ 548.483] (II) UnloadModule: "evdev" [ 548.483] (II) evdev: Power Button: Close [ 548.483] (II) UnloadModule: "evdev" [ 548.484] (II) evdev: Sleep Button: Close [ 548.484] (II) UnloadModule: "evdev" [ 548.484] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Close [ 548.484] (II) UnloadModule: "evdev" [ 548.484] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Close [ 548.484] (II) UnloadModule: "evdev" [ 548.484] (II) evdev: Cypress Semiconductor CYTCB4S-01002: Close [ 548.485] (II) UnloadModule: "evdev" [ 548.485] (II) evdev: Cypress Semiconductor CYTCB4S-01001: Close [ 548.485] (II) UnloadModule: "evdev" [ 548.485] (II) evdev: AT Translated Set 2 keyboard: Close [ 548.485] (II) UnloadModule: "evdev" [ 548.485] (II) evdev: Acer WMI hotkeys: Close [ 548.485] (II) UnloadModule: "evdev" [ 548.485] (II) AIGLX: Suspending AIGLX clients for VT switch [ 548.530] Server terminated with error (1). Closing log file.