Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.1 (GGM_ACPI) #0: Tue Sep 5 13:24:09 EST 2006 ggm@garlique.algebras.org:/data/Build/obj/usr/src/sys/arch/i386/compile/GGM_ACPI total memory = 1022 MB avail memory = 1000 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xfd750 PCI BIOS rev. 2.1 found at 0xfd8d6 pcibios: config mechanism [1][x], special cycles [x][x], last bus 8 PCI IRQ Routing Table rev. 1.0 found at 0xfdea0, size 272 bytes (15 entries) PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible) ------------------------------------------ device vendor product pin PIRQ IRQ stage ------------------------------------------ 000:29:0 0x8086 0x24c2 A 0x00 11 0 already assigned 000:29:1 0x8086 0x24c4 B 0x03 11 0 already assigned 000:29:2 0x8086 0x24c7 C 0x02 11 0 already assigned 000:29:7 0x8086 0x24cd D 0x07 11 0 already assigned 000:31:1 0x8086 0x24ca A 0x02 11 0 fixed up 000:31:3 0x8086 0x24c3 B 0x01 11 0 already assigned 000:31:5 0x8086 0x24c5 B 0x01 11 0 already assigned 000:31:6 0x8086 0x24c6 B 0x01 11 0 already assigned 001:00:0 0x1002 0x4c59 A 0x00 11 0 already assigned 002:00:0 0x1180 0x0476 A 0x00 11 0 already assigned 002:00:1 0x1180 0x0476 B 0x01 11 0 already assigned 002:00:2 0x1180 0x0552 C 0x02 11 0 already assigned 002:01:0 0x8086 0x101e A 0x00 11 0 already assigned 002:02:0 0x168c 0x1014 A 0x02 11 0 already assigned ------------------------------------------ mainbus0 (root) pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005800 pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005808 pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005810 pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x0000580c pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x40000000 cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium M (Banias) (686-class), 599.52 MHz, id 0x695 cpu0: features a7e9f9bf cpu0: features a7e9f9bf cpu0: features a7e9f9bf cpu0: features2 180 cpu0: "Intel(R) Pentium(R) M processor 1600MHz" cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu0: using thermal monitor 2 cpu0: Enhanced SpeedStep (956 mV) 600 MHz cpu0: Enhanced SpeedStep frequencies available (MHz): 1600 1400 1200 1000 800 600 acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId < LTP,00000000> acpi0: found ECDT, GPE 28 acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 timecounter: selected timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11 LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11 LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11 LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11 LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 11 LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11 LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11 LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11 LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11 LNKC: ACPI: Found matching pin for 2.0.INTC at func 2: 11 LNKA: ACPI: Found matching pin for 2.1.INTA at func 0: 11 LNKC: ACPI: Found matching pin for 2.2.INTA at func 0: 11 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured acpi: activated PNP0C0F acpi: activated PNP0C0F acpi: activated PNP0400 PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C01 at acpi0 not configured acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button PNP0A03 at acpi0 not configured PNP0C02 at acpi0 not configured PNP0000 at acpi0 not configured attimer1 at acpi0 (PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 PNP0200 at acpi0 not configured pcppi1 at acpi0 (PNP0800) pcppi1: io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 npx0 at acpi0 (PNP0C04) npx0: io 0xf0 irq 13 npx0: using exception 16 PNP0B00 at acpi0 not configured pckbc1 at acpi0 (PNP0303): kbd port pckbc1: io 0x60,0x64 irq 1 pckbc2 at acpi0 (IBM3780): aux port pckbc2: irq 12 com0 at acpi0 (PNP0501) com0: io 0x3f8-0x3ff irq 4 com0: ns16550a, working fifo lpt0 at acpi0 (PNP0400) lpt0: io 0x3bc-0x3be irq 7 com1 at acpi0 (IBM0071) com1: io 0x2f8-0x2ff irq 3 drq 3 com1: ns16550a, working fifo acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller acpiec0: io 0x62,0x66 ACPI Object Type 'Power' (0x0b) at acpi0 not configured acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method) acpibat1 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method) acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter IBM0068 at acpi0 not configured acpitz0 at acpi0: ACPI Thermal Zone acpitz0: unable to get polling interval; using default of 30.0s acpitz0: passive cooling mode only acpitz0: critical 91.0C passive 34.0C pcppi1: attached to attimer1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82855PM MCH Host Controller (rev. 0x03) agp0 at pchb0: aperture at 0xd0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M6 LY (rev. 0x00) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01) uhci0: interrupting at irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01) uhci1: interrupting at irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01) uhci2: interrupting at irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01) ehci0: interrupting at irq 11 ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled cbb0 at pci2 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xaa) cbb1 at pci2 dev 0 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xaa) fwohci0 at pci2 dev 0 function 2: Ricoh 5C552 PCI-CardBus bridge/Firewire (rev. 0x02) fwohci0: interrupting at irq 11 fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:06:1b:03:10:03:af:90 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3 wm0: interrupting at irq 11 wm0: 32-bit 33MHz PCI bus wm0: 64 word (6 address bits) MicroWire EEPROM wm0: Ethernet address 00:0d:60:80:47:94 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ath0 at pci2 dev 2 function 0 ath0: interrupting at irq 11 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3 cbb0: interrupting at irq 11 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 pcmcia0 at cardslot0 cbb1: interrupting at irq 11 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 4 pcmcia1 at cardslot1 ichlpcib0 at pci0 dev 31 function 0 ichlpcib0: Intel 82801DB ISA Bridge (rev. 0x01) ichlpcib0: TCO (watchdog) timer configured. ichlpcib0: SpeedStep enabled piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel interrupting at irq 15 atabus1 at piixide0 channel 1 Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio auich0: interrupting at irq 11 auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo auich0: ac97: ext id 601 Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured isa0 at ichlpcib0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support isapnp0: no ISA Plug 'n Play devices found WARNING: Callback scheduled before sysmon task queue thread present. fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) ieee1394if0: bus manager 0 (me) timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz audio0 at auich0: full duplex, mmap, independent wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wdc0 at pcmcia1 function 0: wdc0: i/o mapped mode atabus2 at wdc0 channel 0 wd1 at atabus2 drive 0: wd1: drive supports 1-sector PIO transfers, LBA addressing wd1: 122 MB, 978 cyl, 8 head, 32 sec, 512 bytes/sect x 250368 sectors wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)