[ 9.818] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 9.818] X Protocol Version 11, Revision 0 [ 9.818] Build Operating System: Linux 3.6.0-1-ARCH i686 [ 9.818] Current Operating System: Linux fortaleza 3.6.2-1-ARCH #1 SMP PREEMPT Sat Oct 13 07:19:40 CEST 2012 i686 [ 9.818] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6ff411cd-705e-4e52-8e0f-3a8df5b482fb ro init=/usr/lib/systemd/systemd [ 9.819] Build Date: 05 October 2012 02:01:30PM [ 9.819] [ 9.819] Current version of pixman: 0.26.2 [ 9.819] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 9.819] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 9.819] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 16 11:57:43 2012 [ 9.902] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 9.942] (==) No Layout section. Using the first Screen section. [ 9.942] (==) No screen section available. Using defaults. [ 9.942] (**) |-->Screen "Default Screen Section" (0) [ 9.942] (**) | |-->Monitor "" [ 9.968] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 9.968] (==) Automatically adding devices [ 9.968] (==) Automatically enabling devices [ 9.968] (==) Automatically adding GPU devices [ 9.987] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 9.987] Entry deleted from font path. [ 9.995] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 9.995] Entry deleted from font path. [ 9.995] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 9.995] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 9.995] Entry deleted from font path. [ 9.995] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 9.995] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/ [ 9.996] (==) ModulePath set to "/usr/lib/xorg/modules" [ 9.996] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 9.996] (II) Loader magic: 0x825a620 [ 9.996] (II) Module ABI versions: [ 9.996] X.Org ANSI C Emulation: 0.4 [ 9.996] X.Org Video Driver: 13.0 [ 9.996] X.Org XInput driver : 18.0 [ 9.996] X.Org Server Extension : 7.0 [ 9.998] (II) config/udev: Adding drm device (/dev/dri/card0) [ 9.999] (--) PCI:*(0:0:2:0) 8086:2572:1849:2572 rev 2, Mem @ 0xf0000000/134217728, 0xff280000/524288, I/O @ 0x0000ec00/8 [ 9.999] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 10.000] Initializing built-in extension Generic Event Extension [ 10.000] Initializing built-in extension SHAPE [ 10.000] Initializing built-in extension MIT-SHM [ 10.000] Initializing built-in extension XInputExtension [ 10.000] Initializing built-in extension XTEST [ 10.000] Initializing built-in extension BIG-REQUESTS [ 10.000] Initializing built-in extension SYNC [ 10.000] Initializing built-in extension XKEYBOARD [ 10.000] Initializing built-in extension XC-MISC [ 10.000] Initializing built-in extension SECURITY [ 10.000] Initializing built-in extension XINERAMA [ 10.000] Initializing built-in extension XFIXES [ 10.000] Initializing built-in extension RENDER [ 10.000] Initializing built-in extension RANDR [ 10.000] Initializing built-in extension COMPOSITE [ 10.000] Initializing built-in extension DAMAGE [ 10.000] Initializing built-in extension MIT-SCREEN-SAVER [ 10.000] Initializing built-in extension DOUBLE-BUFFER [ 10.000] Initializing built-in extension RECORD [ 10.000] Initializing built-in extension DPMS [ 10.000] Initializing built-in extension X-Resource [ 10.000] Initializing built-in extension XVideo [ 10.000] Initializing built-in extension XVideo-MotionCompensation [ 10.000] Initializing built-in extension XFree86-VidModeExtension [ 10.000] Initializing built-in extension XFree86-DGA [ 10.000] Initializing built-in extension XFree86-DRI [ 10.000] Initializing built-in extension DRI2 [ 10.000] (II) LoadModule: "glx" [ 10.001] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 10.135] (II) Module glx: vendor="X.Org Foundation" [ 10.135] compiled for 1.13.0, module version = 1.0.0 [ 10.135] ABI class: X.Org Server Extension, version 7.0 [ 10.135] (==) AIGLX enabled [ 10.136] Loading extension GLX [ 10.136] (==) Matched intel as autoconfigured driver 0 [ 10.136] (==) Matched intel as autoconfigured driver 1 [ 10.136] (==) Matched vesa as autoconfigured driver 2 [ 10.136] (==) Matched modesetting as autoconfigured driver 3 [ 10.136] (==) Matched fbdev as autoconfigured driver 4 [ 10.136] (==) Assigned the driver to the xf86ConfigLayout [ 10.136] (II) LoadModule: "intel" [ 10.137] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 10.272] (II) Module intel: vendor="X.Org Foundation" [ 10.272] compiled for 1.13.0, module version = 2.20.10 [ 10.272] Module class: X.Org Video Driver [ 10.272] ABI class: X.Org Video Driver, version 13.0 [ 10.272] (II) LoadModule: "vesa" [ 10.273] (WW) Warning, couldn't open module vesa [ 10.273] (II) UnloadModule: "vesa" [ 10.274] (II) Unloading vesa [ 10.274] (EE) Failed to load module "vesa" (module does not exist, 0) [ 10.274] (II) LoadModule: "modesetting" [ 10.274] (WW) Warning, couldn't open module modesetting [ 10.274] (II) UnloadModule: "modesetting" [ 10.274] (II) Unloading modesetting [ 10.274] (EE) Failed to load module "modesetting" (module does not exist, 0) [ 10.274] (II) LoadModule: "fbdev" [ 10.274] (WW) Warning, couldn't open module fbdev [ 10.274] (II) UnloadModule: "fbdev" [ 10.274] (II) Unloading fbdev [ 10.274] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 10.274] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 10.276] (++) using VT number 7 [ 10.286] (II) intel(0): using device path '/dev/dri/card0' [ 10.286] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 10.286] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 10.286] (==) intel(0): RGB weight 888 [ 10.286] (==) intel(0): Default visual is TrueColor [ 10.286] (--) intel(0): Integrated Graphics Chipset: Intel(R) 865G [ 10.286] (**) intel(0): Relaxed fencing disabled [ 10.286] (**) intel(0): Wait on SwapBuffers? enabled [ 10.286] (**) intel(0): Triple buffering? enabled [ 10.286] (**) intel(0): Framebuffer tiled [ 10.286] (**) intel(0): Pixmaps tiled [ 10.286] (**) intel(0): 3D buffers tiled [ 10.286] (**) intel(0): SwapBuffers wait enabled [ 10.286] (==) intel(0): video overlay key set to 0x101fe [ 10.540] (II) intel(0): Output VGA1 has no monitor section [ 10.793] (II) intel(0): EDID for output VGA1 [ 10.793] (II) intel(0): Manufacturer: SAM Model: 1b7 Serial#: 1212231991 [ 10.793] (II) intel(0): Year: 2006 Week: 31 [ 10.793] (II) intel(0): EDID Version: 1.3 [ 10.793] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 10.793] (II) intel(0): Sync: Separate Composite SyncOnGreen [ 10.793] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 10.793] (II) intel(0): Gamma: 2.20 [ 10.793] (II) intel(0): DPMS capabilities: Off; RGB/Color Display [ 10.793] (II) intel(0): First detailed timing is preferred mode [ 10.793] (II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.330 greenY: 0.600 [ 10.793] (II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329 [ 10.793] (II) intel(0): Supported established timings: [ 10.793] (II) intel(0): 720x400@70Hz [ 10.793] (II) intel(0): 640x480@60Hz [ 10.793] (II) intel(0): 640x480@67Hz [ 10.793] (II) intel(0): 640x480@72Hz [ 10.793] (II) intel(0): 640x480@75Hz [ 10.793] (II) intel(0): 800x600@56Hz [ 10.793] (II) intel(0): 800x600@60Hz [ 10.793] (II) intel(0): 800x600@72Hz [ 10.793] (II) intel(0): 800x600@75Hz [ 10.793] (II) intel(0): 832x624@75Hz [ 10.793] (II) intel(0): 1024x768@60Hz [ 10.793] (II) intel(0): 1024x768@70Hz [ 10.793] (II) intel(0): 1024x768@75Hz [ 10.793] (II) intel(0): 1280x1024@75Hz [ 10.794] (II) intel(0): 1152x864@75Hz [ 10.794] (II) intel(0): Manufacturer's mask: 0 [ 10.794] (II) intel(0): Supported standard timings: [ 10.794] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 10.794] (II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 10.794] (II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 10.794] (II) intel(0): Supported detailed timing: [ 10.794] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 10.794] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 10.794] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 10.794] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz [ 10.794] (II) intel(0): Monitor name: SyncMaster [ 10.794] (II) intel(0): Serial No: H9NL781309 [ 10.794] (II) intel(0): EDID (in hex): [ 10.794] (II) intel(0): 00ffffffffffff004c2db70137314148 [ 10.794] (II) intel(0): 1f1001030e221b782aaaa5a654549926 [ 10.794] (II) intel(0): 145054bfef8081808140714f01010101 [ 10.794] (II) intel(0): 010101010101302a009851002a403070 [ 10.794] (II) intel(0): 1300520e1100001e000000fd00384b1e [ 10.794] (II) intel(0): 510e000a202020202020000000fc0053 [ 10.794] (II) intel(0): 796e634d61737465720a2020000000ff [ 10.794] (II) intel(0): 0048394e4c3738313330390a20200051 [ 10.794] (II) intel(0): EDID vendor "SAM", prod id 439 [ 10.794] (II) intel(0): Using EDID range info for horizontal sync [ 10.794] (II) intel(0): Using EDID range info for vertical refresh [ 10.794] (II) intel(0): Printing DDC gathered Modelines: [ 10.794] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 10.794] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 10.794] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 10.794] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 10.794] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 10.794] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 10.794] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 10.794] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 10.794] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 10.794] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 10.794] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 10.794] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 10.794] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 10.794] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 10.794] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 10.794] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 10.794] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 10.794] (II) intel(0): Printing probed modes for output VGA1 [ 10.794] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 10.794] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 10.794] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 10.794] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e) [ 10.794] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 10.794] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 10.794] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e) [ 10.795] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 10.795] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 10.795] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 10.795] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 10.795] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz) [ 10.795] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 10.795] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 10.795] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 10.795] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 10.795] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 10.795] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 10.795] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 10.795] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 10.795] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 10.795] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 10.795] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 10.795] (II) intel(0): Output VGA1 connected [ 10.795] (II) intel(0): Using exact sizes for initial modes [ 10.795] (II) intel(0): Output VGA1 using initial mode 1280x1024 [ 10.795] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 10.795] (II) intel(0): Kernel page flipping support detected, enabling [ 10.795] (**) intel(0): Display dimensions: (340, 270) mm [ 10.795] (**) intel(0): DPI set to (95, 96) [ 10.795] (II) Loading sub module "fb" [ 10.795] (II) LoadModule: "fb" [ 10.795] (II) Loading /usr/lib/xorg/modules/libfb.so [ 10.900] (II) Module fb: vendor="X.Org Foundation" [ 10.900] compiled for 1.13.0, module version = 1.0.0 [ 10.900] ABI class: X.Org ANSI C Emulation, version 0.4 [ 10.900] (II) Loading sub module "dri2" [ 10.900] (II) LoadModule: "dri2" [ 10.900] (II) Module "dri2" already built-in [ 10.900] (==) Depth 24 pixmap format is 32 bpp [ 10.909] (II) intel(0): [DRI2] Setup complete [ 10.909] (II) intel(0): [DRI2] DRI driver: i915 [ 10.909] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled [ 10.930] (II) UXA(0): Driver registered support for the following operations: [ 10.930] (II) solid [ 10.930] (II) copy [ 10.930] (II) composite (RENDER acceleration) [ 10.930] (II) put_image [ 10.930] (II) get_image [ 10.931] (==) intel(0): Backing store disabled [ 10.931] (==) intel(0): Silken mouse enabled [ 10.931] (II) intel(0): Initializing HW Cursor [ 10.931] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 10.932] (==) intel(0): DPMS enabled [ 10.932] (==) intel(0): Intel XvMC decoder disabled [ 10.932] (II) intel(0): Set up overlay video [ 10.932] (II) intel(0): direct rendering: DRI2 Enabled [ 10.932] (==) intel(0): hotplug detection: "enabled" [ 10.956] (--) RandR disabled [ 11.442] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 11.442] (II) AIGLX: enabled GLX_INTEL_swap_event [ 11.442] (II) AIGLX: enabled GLX_ARB_create_context [ 11.442] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 11.442] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 11.442] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 11.442] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 11.442] (II) AIGLX: Loaded and initialized i915 [ 11.442] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 11.443] (II) intel(0): Setting screen physical size to 338 x 270 [ 11.741] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 11.741] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 11.741] (II) LoadModule: "evdev" [ 11.742] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 11.769] (II) Module evdev: vendor="X.Org Foundation" [ 11.769] compiled for 1.13.0, module version = 2.7.3 [ 11.769] Module class: X.Org XInput Driver [ 11.769] ABI class: X.Org XInput driver, version 18.0 [ 11.769] (II) Using input driver 'evdev' for 'Power Button' [ 11.769] (**) Power Button: always reports core events [ 11.769] (**) evdev: Power Button: Device: "/dev/input/event2" [ 11.769] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 11.769] (--) evdev: Power Button: Found keys [ 11.769] (II) evdev: Power Button: Configuring as keyboard [ 11.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 11.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 11.769] (**) Option "xkb_rules" "evdev" [ 11.769] (**) Option "xkb_model" "evdev" [ 11.769] (**) Option "xkb_layout" "us" [ 11.808] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 11.808] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 11.808] (II) Using input driver 'evdev' for 'Power Button' [ 11.808] (**) Power Button: always reports core events [ 11.808] (**) evdev: Power Button: Device: "/dev/input/event1" [ 11.808] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 11.808] (--) evdev: Power Button: Found keys [ 11.808] (II) evdev: Power Button: Configuring as keyboard [ 11.808] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 11.808] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 11.808] (**) Option "xkb_rules" "evdev" [ 11.808] (**) Option "xkb_model" "evdev" [ 11.808] (**) Option "xkb_layout" "us" [ 11.809] (II) config/udev: Adding drm device (/dev/dri/card0) [ 11.809] (II) config/udev: Adding input device gspca_pac7302 (/dev/input/event3) [ 11.809] (**) gspca_pac7302: Applying InputClass "evdev keyboard catchall" [ 11.809] (II) Using input driver 'evdev' for 'gspca_pac7302' [ 11.809] (**) gspca_pac7302: always reports core events [ 11.809] (**) evdev: gspca_pac7302: Device: "/dev/input/event3" [ 11.810] (--) evdev: gspca_pac7302: Vendor 0x93a Product 0x2628 [ 11.810] (--) evdev: gspca_pac7302: Found keys [ 11.810] (II) evdev: gspca_pac7302: Configuring as keyboard [ 11.810] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/input/input3/event3" [ 11.810] (II) XINPUT: Adding extended input device "gspca_pac7302" (type: KEYBOARD, id 8) [ 11.810] (**) Option "xkb_rules" "evdev" [ 11.810] (**) Option "xkb_model" "evdev" [ 11.810] (**) Option "xkb_layout" "us" [ 11.810] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4) [ 11.810] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 11.810] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 11.810] (**) Logitech USB Optical Mouse: always reports core events [ 11.811] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event4" [ 11.811] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc06c [ 11.811] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 11.811] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 11.811] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 11.811] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 11.811] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 11.811] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 11.811] (**) Option "Emulate3Buttons" "on" [ 11.811] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 11.811] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 11.811] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input4/event4" [ 11.811] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9) [ 11.811] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 11.811] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 11.811] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 11.811] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 11.811] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 11.811] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 11.812] (II) No input driver specified, ignoring this device. [ 11.812] (II) This device may have been added with another device file. [ 11.812] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 11.812] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 11.812] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 11.812] (**) AT Translated Set 2 keyboard: always reports core events [ 11.812] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 11.812] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 11.812] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 11.812] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 11.812] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 11.812] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 11.812] (**) Option "xkb_rules" "evdev" [ 11.812] (**) Option "xkb_model" "evdev" [ 11.812] (**) Option "xkb_layout" "us" [ 42.596] (II) intel(0): EDID vendor "SAM", prod id 439 [ 42.597] (II) intel(0): Using hsync ranges from config file [ 42.597] (II) intel(0): Using vrefresh ranges from config file [ 42.597] (II) intel(0): Printing DDC gathered Modelines: [ 42.597] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 42.597] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 42.597] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 42.597] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 42.597] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 42.597] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 42.597] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 42.597] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 42.597] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 42.597] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 42.597] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 42.597] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 42.597] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 42.597] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 42.597] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 42.597] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 42.597] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)