Linux version 3.4.6-pf-2 (root@laptoppy) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 SMP PREEMPT Sat Oct 27 21:44:17 MSK 2012 Command line: root=/dev/sda3 quiet threadirqs console=tty1 udev real_resume=UUID=6be67394-b972-4dbd-8a5c-fcbd9646f337 doscsi video=1366x768-32@60 radeon.modeset=1 radeon.pcie_gen2=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000066b3f000 (usable) BIOS-e820: 0000000066b3f000 - 0000000066bbf000 (reserved) BIOS-e820: 0000000066bbf000 - 0000000066ebf000 (ACPI NVS) BIOS-e820: 0000000066ebf000 - 0000000066ef5000 (ACPI data) BIOS-e820: 0000000066ef5000 - 0000000066f00000 (usable) BIOS-e820: 0000000066f00000 - 000000007f000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.7 present. DMI: Hewlett-Packard HP 635 /3577, BIOS F.43 12/13/2011 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x66f00 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 040000000 mask FE0000000 write-back 2 base 060000000 mask FF8000000 write-back 3 base 066EBD000 mask FFFFFF000 uncachable 4 base 0FFE00000 mask FFFE00000 write-protect 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-0000000066f00000 0000000000 - 0040000000 page 1G 0040000000 - 0066e00000 page 2M 0066e00000 - 0066f00000 page 4k kernel direct mapping tables up to 66f00000 @ 1fffd000-20000000 ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) ACPI: XSDT 0000000066ef4120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 0000000066ef3000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000) ACPI: DSDT 0000000066ede000 10022 (v01 HP INSYDE F0000000 ACPI 00040000) ACPI: FACS 0000000066c96000 00040 ACPI: HPET 0000000066ef2000 00038 (v01 HP INSYDE 00000001 ACPI 00040000) ACPI: APIC 0000000066ef1000 00084 (v02 HP INSYDE 00000001 ACPI 00040000) ACPI: MCFG 0000000066ef0000 0003C (v01 HP INSYDE 00000001 ACPI 00040000) ACPI: ASF! 0000000066eef000 000A5 (v32 HP INSYDE 00000001 ACPI 00040000) ACPI: BOOT 0000000066edd000 00028 (v01 HP INSYDE 00000001 ACPI 00040000) ACPI: SLIC 0000000066edc000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000) ACPI: SSDT 0000000066edb000 003DE (v01 HP INSYDE 00000001 AMD 00000001) ACPI: SSDT 0000000066ed9000 0168E (v02 HP INSYDE 00000001 MSFT 04000000) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880064800000-ffff8800661fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00066b3f 0: 0x00066ef5 -> 0x00066f00 On node 0 totalpages: 420569 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 6524 pages used for memmap DMA32 zone: 410062 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x43538210 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 0000000066b3f000 - 0000000066bbf000 PM: Registered nosave memory: 0000000066bbf000 - 0000000066ebf000 PM: Registered nosave memory: 0000000066ebf000 - 0000000066ef5000 Allocating PCI resources starting at 7f000000 (gap: 7f000000:79000000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880066800000 s69888 r8192 d24320 u524288 pcpu-alloc: s69888 r8192 d24320 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 413976 Kernel command line: root=/dev/sda3 quiet threadirqs console=tty1 udev real_resume=UUID=6be67394-b972-4dbd-8a5c-fcbd9646f337 doscsi video=1366x768-32@60 radeon.modeset=1 radeon.pcie_gen2=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 1643928k/1686528k available (4857k kernel code, 4252k absent, 38348k reserved, 2199k data, 428k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Preemptible hierarchical RCU implementation. CONFIG_RCU_FANOUT set to non-default value of 32 RCU dyntick-idle grace-period acceleration is enabled. Dump stacks of tasks blocking RCU-preempt GP. NR_IRQS:4352 nr_irqs:712 16 Console: colour VGA+ 80x25 console [tty1] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1646.514 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.02 BogoMIPS (lpj=1646514) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys bfqio tseg: 0066f00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (6586.05 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0x66bbf000-0x66ebefff] (3145728 bytes) NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xf7ffffff] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce5ff]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xf7ffffff] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 pci 0000:00:01.0: [1002:9806] type 00 class 0x030000 pci 0000:00:01.0: reg 10: [mem 0x80000000-0x8fffffff pref] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff] pci 0000:00:01.0: reg 18: [mem 0x90400000-0x9043ffff] pci 0000:00:01.0: supports D1 D2 pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 pci 0000:00:01.1: reg 10: [mem 0x90444000-0x90447fff] pci 0000:00:01.1: supports D1 D2 pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 pci 0000:00:11.0: reg 10: [io 0x4118-0x411f] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f] pci 0000:00:11.0: reg 24: [mem 0x9044d000-0x9044d3ff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:12.0: reg 10: [mem 0x9044c000-0x9044cfff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:12.2: reg 10: [mem 0x9044b000-0x9044b0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0x90440000-0x90443fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 pci 0000:00:14.5: reg 10: [mem 0x9044a000-0x9044afff] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 pci 0000:00:15.0: supports D1 D2 pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 pci 0000:00:15.1: supports D1 D2 pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400 pci 0000:00:15.3: supports D1 D2 pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:16.0: reg 10: [mem 0x90449000-0x90449fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:16.2: reg 10: [mem 0x90448000-0x904480ff] pci 0000:00:16.2: supports D1 D2 pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x7f000000-0xf7ffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode) pci 0000:02:00.0: [10ec:5209] type 00 class 0xff0000 pci 0000:02:00.0: reg 10: [mem 0x90300000-0x90300fff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot pci 0000:00:15.0: PCI bridge to [bus 02-05] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] pci 0000:00:15.0: bridge window [mem 0x90300000-0x903fffff] pci 0000:00:15.0: bridge window [mem 0x90000000-0x900fffff 64bit pref] pci 0000:06:00.0: [10ec:8136] type 00 class 0x020000 pci 0000:06:00.0: reg 10: [io 0x2000-0x20ff] pci 0000:06:00.0: reg 18: [mem 0x90104000-0x90104fff 64bit pref] pci 0000:06:00.0: reg 20: [mem 0x90100000-0x90103fff 64bit pref] pci 0000:06:00.0: supports D1 D2 pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:15.1: PCI bridge to [bus 06-06] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] pci 0000:00:15.1: bridge window [mem 0x90100000-0x901fffff 64bit pref] pci 0000:07:00.0: [168c:002b] type 00 class 0x028000 pci 0000:07:00.0: reg 10: [mem 0x90200000-0x9020ffff 64bit] pci 0000:07:00.0: supports D1 pci 0000:07:00.0: PME# supported from D0 D1 D3hot pci 0000:00:15.3: PCI bridge to [bus 07-07] pci 0000:00:15.3: bridge window [mem 0x90200000-0x902fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:01.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux video capture interface: v2.00 Advanced Linux Sound Architecture Driver Version 1.0.25. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 0000000066b3f000 - 0000000067ffffff reserve RAM buffer: 0000000066f00000 - 0000000067ffffff hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x7f000000-0xf7ffffff window] pnp 00:00: [mem 0xfc000000-0xfed3ffff window] pnp 00:00: [mem 0xfed45000-0xffffffff window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfec00000-0xfec00fff] pnp 00:01: [mem 0xfee00000-0xfee00fff] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [irq 0 disabled] pnp 00:02: [irq 8] pnp 00:02: [mem 0xfed00000-0xfed003ff] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0081-0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x00f0-0x00fe] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x0070-0x0071] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0061] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:07: [io 0x0010-0x001f] pnp 00:07: [io 0x002e-0x002f] pnp 00:07: [io 0x0072-0x0073] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x00b0-0x00b1] pnp 00:07: [io 0x0092] pnp 00:07: [io 0x0400-0x04cf] pnp 00:07: [io 0x04d0-0x04d1] pnp 00:07: [io 0x04d6] pnp 00:07: [io 0x0680-0x06ff] pnp 00:07: [io 0x077a] pnp 00:07: [io 0x0c00-0x0c01] pnp 00:07: [io 0x0c14] pnp 00:07: [io 0x0c50-0x0c52] pnp 00:07: [io 0x0c6c] pnp 00:07: [io 0x0c6f] pnp 00:07: [io 0x0cd0-0x0cdb] system 00:07: [io 0x0400-0x04cf] has been reserved system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x04d6] has been reserved system 00:07: [io 0x0680-0x06ff] has been reserved system 00:07: [io 0x077a] has been reserved system 00:07: [io 0x0c00-0x0c01] has been reserved system 00:07: [io 0x0c14] has been reserved system 00:07: [io 0x0c50-0x0c52] has been reserved system 00:07: [io 0x0c6c] has been reserved system 00:07: [io 0x0c6f] has been reserved system 00:07: [io 0x0cd0-0x0cdb] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [mem 0x000e0000-0x000fffff] pnp 00:08: [mem 0xffffffb0-0xfffffffe] pnp 00:08: [mem 0xffffff00-0xfffffffe] pnp 00:08: [mem 0xffe00000-0xffffffff] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved system 00:08: [mem 0xffffffb0-0xfffffffe] has been reserved system 00:08: [mem 0xffffff00-0xfffffffe] could not be reserved system 00:08: [mem 0xffe00000-0xffffffff] could not be reserved system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:09: [io 0x0060] pnp 00:09: [io 0x0064] pnp 00:09: [irq 1] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:0a: [irq 12] pnp 00:0a: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:14.4: PCI bridge to [bus 01-01] pci 0000:00:15.0: PCI bridge to [bus 02-05] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] pci 0000:00:15.0: bridge window [mem 0x90300000-0x903fffff] pci 0000:00:15.0: bridge window [mem 0x90000000-0x900fffff 64bit pref] pci 0000:00:15.1: PCI bridge to [bus 06-06] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] pci 0000:00:15.1: bridge window [mem 0x90100000-0x901fffff 64bit pref] pci 0000:00:15.3: PCI bridge to [bus 07-07] pci 0000:00:15.3: bridge window [mem 0x90200000-0x902fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] pci_bus 0000:00: resource 18 [mem 0x7f000000-0xf7ffffff] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff] pci_bus 0000:01: resource 18 [mem 0x7f000000-0xf7ffffff] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0x90300000-0x903fffff] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] pci_bus 0000:06: resource 2 [mem 0x90100000-0x901fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0x90200000-0x902fffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:00:01.0: Boot video device PCI: CLS 64 bytes, default 64 Simple Boot Flag at 0x44 set to 0x1 LVT offset 0 assigned for vector 0x400 perf: AMD IBS detected (0x000000ff) JFS: nTxBlock = 8192, nTxLock = 65536 msgmni has been set to 3210 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered io scheduler bfq registered (default) pcieport 0000:00:15.0: irq 40 for MSI/MSI-X pcieport 0000:00:15.1: irq 41 for MSI/MSI-X pcieport 0000:00:15.3: irq 42 for MSI/MSI-X pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt pci 0000:02:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt pci 0000:06:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt pci 0000:07:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded ACPI: AC Adapter [AC] (off-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TSZ0] (50 C) [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x103C:0x3577). [drm] register mmio base: 0x90400000 [drm] register mmio size: 262144 ATOM BIOS: HP radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF [drm] Detected VRAM RAM=384M, BAR=256M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 821964 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 384M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. radeon 0000:00:01.0: irq 43 for MSI/MSI-X radeon 0000:00:01.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] Loading PALM Microcode [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). radeon 0000:00:01.0: WB enabled [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880063a3ec00 [drm] ring test on 0 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] LVDS [drm] HPD1 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] LCD1: INTERNAL_UNIPHY [drm] Connector 1: [drm] HDMI-A [drm] HPD2 [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] Connector 2: [drm] VGA [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Internal thermal controller without fan control [drm] radeon: power management initialized [drm] fb mappable at 0x80142000 [drm] vram apper at 0x80000000 [drm] size 4325376 [drm] fb depth is 24 [drm] pitch is 5632 fbcon: radeondrmfb (fb0) is primary device ACPI: Battery Slot [BAT0] (battery present) Refined TSC clocksource calibration: 1646.493 MHz. Switching to clocksource tsc Console: switching to colour frame buffer device 170x48 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.16.0 20080528 for 0000:00:01.0 on minor 0 loop: module loaded ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci ata1: SATA max UDMA/133 abar m1024@0x9044d000 port 0x9044d100 irq 19 ata2: SATA max UDMA/133 abar m1024@0x9044d000 port 0x9044d180 irq 19 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:06:00.0: irq 44 for MSI/MSI-X r8169 0000:06:00.0: eth0: RTL8105e at 0xffffc9000006c000, 2c:76:8a:d8:23:19, XID 00a00000 IRQ 44 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround QUIRK: Enable AMD PLL fix ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0x9044b000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.4.6-pf-2 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:16.2: debug port 1 ehci_hcd 0000:00:16.2: irq 17, io mem 0x90448000 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.4.6-pf-2 ehci_hcd usb usb2: SerialNumber: 0000:00:16.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 18, io mem 0x9044c000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 3.4.6-pf-2 ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:14.5: irq 18, io mem 0x9044a000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 3.4.6-pf-2 ohci_hcd usb usb4: SerialNumber: 0000:00:14.5 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:16.0: irq 18, io mem 0x90449000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 3.4.6-pf-2 ohci_hcd usb usb5: SerialNumber: 0000:00:16.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 4 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5 input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 TCP: cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type TuxOnIce 3.3 (http://tuxonice.net) Scanning swap devices for TuxOnIce signature... TuxOnIce scan: No image found. ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATAPI: hp DVD RW AD-7711H, 1.82, max UDMA/100 ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 02.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 usb 2-2: new high-speed USB device number 2 using ehci_hcd scsi 1:0:0:0: CD-ROM hp DVD RW AD-7711H 1.82 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Scanning swap devices for TuxOnIce signature... - Trying 8:2. TuxOnIce scan: No image found. TuxOnIce: No image found. Restarting tasks ... done. rtc_cmos 00:05: setting system clock to 2012-11-08 08:17:29 UTC (1352362649) powernow-k8: Found 1 AMD E-450 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (1650 MHz) powernow-k8: 1 : pstate 1 (1320 MHz) powernow-k8: 2 : pstate 2 (825 MHz) ALSA device list: #0: HD-Audio Generic at 0x90444000 irq 45 #1: HDA ATI SB at 0x90440000 irq 16 VFS: Mounted root (jfs filesystem) readonly on device 8:3. usb 2-2: New USB device found, idVendor=05c8, idProduct=021e usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-2: Product: HP Webcam-101 usb 2-2: Manufacturer: HP Webcam-101 usb 2-2: SerialNumber: HP Webcam-101 uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e) devtmpfs: mounted Freeing unused kernel memory: 428k freed BFS CPU scheduler v0.424 by Con Kolivas. input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input8 usb 4-2: new full-speed USB device number 2 using ohci_hcd usb 4-2: New USB device found, idVendor=0cf3, idProduct=3005 usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 systemd-udevd[956]: starting version 195 acpi device:01: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) wmi: Mapper loaded systemd-udevd[971]: renamed network interface eth0 to eth1 Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized rts_pstor: module is from the staging directory, the quality is unknown, you have been warned. Initializing Realtek PCIE storage driver... Resource length: 0x1000 Original address: 0x90300000, remapped address: 0xffffc9000003a000 pci->irq = 20 rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20 usbcore: registered new interface driver btusb scsi2 : SCSI emulation for PCI-Express Mass Storage devices rts_pstor: waiting for device to settle before scanning input: HP WMI hotkeys as /devices/virtual/input/input10 cfg80211: Calling CRDA to update world regulatory domain ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236) ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff88006444c2d0), AE_AML_BUFFER_LIMIT (20120320/psparse-536) ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88006444cb18), AE_AML_BUFFER_LIMIT (20120320/psparse-536) ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236) ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff88006444c2d0), AE_AML_BUFFER_LIMIT (20120320/psparse-536) ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88006444cb18), AE_AML_BUFFER_LIMIT (20120320/psparse-536) ath: EEPROM regdomain: 0x60 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x60 ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' Registered led device: ath9k-phy0 ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050a0000, irq=23 psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 rts_pstor: device scan complete scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg2 type 0 Adding 4194300k swap on /dev/sda2. Priority:1 extents:1 across:4194300k fsck.jfs: sending ioctl 1261 to a partition! fsck.jfs: sending ioctl 1261 to a partition! fsck.jfs: sending ioctl 1261 to a partition! fsck.jfs: sending ioctl 1261 to a partition! Adding 4194300k swap on /home/swap-tmp. Priority:2 extents:5 across:155192412k Switching to clocksource hpet wlan0: authenticate with b8:a3:86:08:58:77 wlan0: send auth to b8:a3:86:08:58:77 (try 1/3) wlan0: authenticated wlan0: associate with b8:a3:86:08:58:77 (try 1/3) wlan0: RX AssocResp from b8:a3:86:08:58:77 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from b8:a3:86:08:58:77 by local choice (reason=3) cfg80211: Calling CRDA for country: JP PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache Ready to suspend sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! PM: suspend of devices complete after 1079.895 msecs PM: late suspend of devices complete after 0.172 msecs pcieport 0000:00:15.1: wake-up capability enabled by ACPI ehci_hcd 0000:00:16.2: wake-up capability enabled by ACPI ohci_hcd 0000:00:16.0: wake-up capability enabled by ACPI ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI PM: noirq suspend of devices complete after 43.873 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 LVT offset 0 assigned for vector 0x400 CPU1 is up ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI ohci_hcd 0000:00:16.0: wake-up capability disabled by ACPI ehci_hcd 0000:00:16.2: wake-up capability disabled by ACPI PM: noirq resume of devices complete after 22.506 msecs PM: early resume of devices complete after 0.076 msecs snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X Ready to resume rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20 pcieport 0000:00:15.1: wake-up capability disabled by ACPI [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). radeon 0000:00:01.0: WB enabled [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880063a3ec00 [drm] ring test on 0 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) usb 4-2: reset full-speed USB device number 2 using ohci_hcd ata2.00: configured for UDMA/100 usb 4-2: device firmware changed ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] Starting disk PM: resume of devices complete after 2920.588 msecs Restarting tasks ... usb 2-2: USB disconnect, device number 2 done. video LNXVIDEO:00: Restoring backlight state sd 2:0:0:0: [sdb] 7835648 512-byte logical blocks: (4.01 GB/3.73 GiB) sd 2:0:0:0: [sdb] Cache data unavailable sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Cache data unavailable sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 usb 2-2: new high-speed USB device number 3 using ehci_hcd usb 2-2: New USB device found, idVendor=05c8, idProduct=021e usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-2: Product: HP Webcam-101 usb 2-2: Manufacturer: HP Webcam-101 usb 2-2: SerialNumber: HP Webcam-101 uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e) input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input12 usb 4-2: USB disconnect, device number 2 usb 4-2: new full-speed USB device number 3 using ohci_hcd usb 4-2: New USB device found, idVendor=03f0, idProduct=311d usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usbcore: registered new interface driver ath3k usb 4-2: USB disconnect, device number 3 FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! usb 4-2: new full-speed USB device number 4 using ohci_hcd usb 4-2: New USB device found, idVendor=0cf3, idProduct=3005 usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 wlan0: authenticate with b8:a3:86:08:58:77 wlan0: send auth to b8:a3:86:08:58:77 (try 1/3) wlan0: authenticated wlan0: associate with b8:a3:86:08:58:77 (try 1/3) wlan0: RX AssocResp from b8:a3:86:08:58:77 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from b8:a3:86:08:58:77 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache Ready to suspend ACPI handle has no context! sd 0:0:0:0: [sda] Stopping disk PM: suspend of devices complete after 1075.869 msecs PM: late suspend of devices complete after 0.151 msecs pcieport 0000:00:15.1: wake-up capability enabled by ACPI ehci_hcd 0000:00:16.2: wake-up capability enabled by ACPI ohci_hcd 0000:00:16.0: wake-up capability enabled by ACPI ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI PM: noirq suspend of devices complete after 43.841 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 LVT offset 0 assigned for vector 0x400 CPU1 is up ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI ohci_hcd 0000:00:16.0: wake-up capability disabled by ACPI ehci_hcd 0000:00:16.2: wake-up capability disabled by ACPI PM: noirq resume of devices complete after 22.383 msecs PM: early resume of devices complete after 0.082 msecs snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X Ready to resume pcieport 0000:00:15.1: wake-up capability disabled by ACPI rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20 [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). radeon 0000:00:01.0: WB enabled [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880063a3ec00 [drm] ring test on 0 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs usb 4-2: reset full-speed USB device number 4 using ohci_hcd ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/100 usb 4-2: device firmware changed ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] Starting disk PM: resume of devices complete after 2774.832 msecs Restarting tasks ... usb 2-2: USB disconnect, device number 3 done. video LNXVIDEO:00: Restoring backlight state usb 2-2: new high-speed USB device number 4 using ehci_hcd usb 2-2: New USB device found, idVendor=05c8, idProduct=021e usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-2: Product: HP Webcam-101 usb 2-2: Manufacturer: HP Webcam-101 usb 2-2: SerialNumber: HP Webcam-101 uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e) input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input13 usb 4-2: USB disconnect, device number 4 usb 4-2: new full-speed USB device number 5 using ohci_hcd usb 4-2: New USB device found, idVendor=03f0, idProduct=311d usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 4-2: USB disconnect, device number 5 usb 4-2: new full-speed USB device number 6 using ohci_hcd usb 4-2: New USB device found, idVendor=0cf3, idProduct=3005 usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 wlan0: authenticate with b8:a3:86:08:58:77 wlan0: send auth to b8:a3:86:08:58:77 (try 1/3) wlan0: authenticated wlan0: associate with b8:a3:86:08:58:77 (try 1/3) wlan0: RX AssocResp from b8:a3:86:08:58:77 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from b8:a3:86:08:58:77 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk Ready to suspend ACPI handle has no context! PM: suspend of devices complete after 1077.888 msecs PM: late suspend of devices complete after 0.151 msecs pcieport 0000:00:15.1: wake-up capability enabled by ACPI ehci_hcd 0000:00:16.2: wake-up capability enabled by ACPI ohci_hcd 0000:00:16.0: wake-up capability enabled by ACPI ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI PM: noirq suspend of devices complete after 43.823 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 LVT offset 0 assigned for vector 0x400 CPU1 is up ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI ohci_hcd 0000:00:16.0: wake-up capability disabled by ACPI ehci_hcd 0000:00:16.2: wake-up capability disabled by ACPI PM: noirq resume of devices complete after 22.575 msecs PM: early resume of devices complete after 0.085 msecs snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X Ready to resume rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20 pcieport 0000:00:15.1: wake-up capability disabled by ACPI [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). radeon 0000:00:01.0: WB enabled [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880063a3ec00 [drm] ring test on 0 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) usb 4-2: reset full-speed USB device number 6 using ohci_hcd ata2.00: configured for UDMA/100 usb 4-2: device firmware changed ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] Starting disk PM: resume of devices complete after 2782.627 msecs Restarting tasks ... usb 2-2: USB disconnect, device number 4 done. video LNXVIDEO:00: Restoring backlight state usb 2-2: new high-speed USB device number 5 using ehci_hcd usb 2-2: New USB device found, idVendor=05c8, idProduct=021e usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-2: Product: HP Webcam-101 usb 2-2: Manufacturer: HP Webcam-101 usb 2-2: SerialNumber: HP Webcam-101 uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e) input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input14 usb 4-2: USB disconnect, device number 6 usb 4-2: new full-speed USB device number 7 using ohci_hcd usb 4-2: New USB device found, idVendor=03f0, idProduct=311d usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 4-2: USB disconnect, device number 7 usb 4-2: new full-speed USB device number 8 using ohci_hcd usb 4-2: New USB device found, idVendor=0cf3, idProduct=3005 usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 wlan0: authenticate with b8:a3:86:08:58:77 wlan0: send auth to b8:a3:86:08:58:77 (try 1/3) wlan0: authenticated wlan0: associate with b8:a3:86:08:58:77 (try 1/3) wlan0: RX AssocResp from b8:a3:86:08:58:77 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from b8:a3:86:08:58:77 by local choice (reason=3) cfg80211: Calling CRDA for country: JP PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache Ready to suspend ACPI handle has no context! sd 0:0:0:0: [sda] Stopping disk PM: suspend of devices complete after 1072.865 msecs PM: late suspend of devices complete after 0.152 msecs pcieport 0000:00:15.1: wake-up capability enabled by ACPI ehci_hcd 0000:00:16.2: wake-up capability enabled by ACPI ohci_hcd 0000:00:16.0: wake-up capability enabled by ACPI ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI PM: noirq suspend of devices complete after 43.846 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 LVT offset 0 assigned for vector 0x400 CPU1 is up ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI ohci_hcd 0000:00:16.0: wake-up capability disabled by ACPI ehci_hcd 0000:00:16.2: wake-up capability disabled by ACPI PM: noirq resume of devices complete after 22.425 msecs PM: early resume of devices complete after 0.079 msecs snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X Ready to resume pcieport 0000:00:15.1: wake-up capability disabled by ACPI rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20 [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). radeon 0000:00:01.0: WB enabled [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880063a3ec00 [drm] ring test on 0 succeeded in 0 usecs [drm] ib test on ring 0 succeeded in 0 usecs ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) usb 4-2: reset full-speed USB device number 8 using ohci_hcd ata2.00: configured for UDMA/100 usb 4-2: device firmware changed ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] Starting disk PM: resume of devices complete after 2874.133 msecs Restarting tasks ... usb 2-2: USB disconnect, device number 5 done. video LNXVIDEO:00: Restoring backlight state usb 2-2: new high-speed USB device number 6 using ehci_hcd usb 2-2: New USB device found, idVendor=05c8, idProduct=021e usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-2: Product: HP Webcam-101 usb 2-2: Manufacturer: HP Webcam-101 usb 2-2: SerialNumber: HP Webcam-101 uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e) input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input15 usb 4-2: USB disconnect, device number 8 usb 4-2: new full-speed USB device number 9 using ohci_hcd usb 4-2: New USB device found, idVendor=03f0, idProduct=311d usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 4-2: USB disconnect, device number 9 usb 4-2: new full-speed USB device number 10 using ohci_hcd usb 4-2: New USB device found, idVendor=0cf3, idProduct=3005 usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 wlan0: authenticate with b8:a3:86:08:58:77 wlan0: send auth to b8:a3:86:08:58:77 (try 1/3) wlan0: authenticated wlan0: associate with b8:a3:86:08:58:77 (try 1/3) wlan0: RX AssocResp from b8:a3:86:08:58:77 (capab=0x411 status=0 aid=1) wlan0: associated