[ 153.384] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 153.384] X Protocol Version 11, Revision 0 [ 153.384] Build Operating System: Linux 3.1.0-7.fc16.i686.PAE i686 [ 153.384] Current Operating System: Linux x-e6510 3.7.0-rc6_stable_20121121+ #1 SMP Wed Nov 21 15:25:12 CST 2012 i686 [ 153.385] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc6_stable_20121121+ root=UUID=408406cf-8ca2-417c-a497-225c96729779 ro rd.md=0 rd.lvm=0 rd.dm=0 KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8 [ 153.385] Build Date: 21 November 2012 03:05:58PM [ 153.385] [ 153.385] Current version of pixman: 0.29.1 [ 153.385] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 153.385] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 153.385] (==) Log file: "/opt/X11R7/var/log/Xorg.0.log", Time: Thu Nov 22 10:57:32 2012 [ 153.385] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 153.385] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 153.385] (==) No Layout section. Using the first Screen section. [ 153.385] (==) No screen section available. Using defaults. [ 153.385] (**) |-->Screen "Default Screen Section" (0) [ 153.385] (**) | |-->Monitor "" [ 153.385] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 153.385] (==) Automatically adding devices [ 153.385] (==) Automatically enabling devices [ 153.385] (==) Automatically adding GPU devices [ 153.385] (WW) The directory "/opt/X11R7/share/fonts/X11/misc/" does not exist. [ 153.385] Entry deleted from font path. [ 153.385] (WW) The directory "/opt/X11R7/share/fonts/X11/TTF/" does not exist. [ 153.385] Entry deleted from font path. [ 153.385] (WW) The directory "/opt/X11R7/share/fonts/X11/OTF/" does not exist. [ 153.385] Entry deleted from font path. [ 153.385] (WW) The directory "/opt/X11R7/share/fonts/X11/Type1/" does not exist. [ 153.385] Entry deleted from font path. [ 153.385] (WW) The directory "/opt/X11R7/share/fonts/X11/100dpi/" does not exist. [ 153.385] Entry deleted from font path. [ 153.385] (WW) The directory "/opt/X11R7/share/fonts/X11/75dpi/" does not exist. [ 153.385] Entry deleted from font path. [ 153.385] (==) FontPath set to: [ 153.385] (==) ModulePath set to "/opt/X11R7/lib/xorg/modules" [ 153.385] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 153.385] (II) Loader magic: 0x8264c00 [ 153.385] (II) Module ABI versions: [ 153.385] X.Org ANSI C Emulation: 0.4 [ 153.385] X.Org Video Driver: 13.1 [ 153.385] X.Org XInput driver : 18.0 [ 153.385] X.Org Server Extension : 7.0 [ 153.386] (II) config/udev: Adding drm device (/dev/dri/card0) [ 153.389] (--) PCI:*(0:0:2:0) 8086:0046:1028:040b rev 2, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x000070b0/8 [ 153.389] (II) Open ACPI successful (/var/run/acpid.socket) [ 153.389] Initializing built-in extension Generic Event Extension [ 153.389] Initializing built-in extension SHAPE [ 153.389] Initializing built-in extension MIT-SHM [ 153.389] Initializing built-in extension XInputExtension [ 153.389] Initializing built-in extension XTEST [ 153.389] Initializing built-in extension BIG-REQUESTS [ 153.389] Initializing built-in extension SYNC [ 153.389] Initializing built-in extension XKEYBOARD [ 153.389] Initializing built-in extension XC-MISC [ 153.389] Initializing built-in extension XINERAMA [ 153.389] Initializing built-in extension XFIXES [ 153.389] Initializing built-in extension RENDER [ 153.389] Initializing built-in extension RANDR [ 153.389] Initializing built-in extension COMPOSITE [ 153.389] Initializing built-in extension DAMAGE [ 153.389] Initializing built-in extension MIT-SCREEN-SAVER [ 153.389] Initializing built-in extension DOUBLE-BUFFER [ 153.389] Initializing built-in extension RECORD [ 153.389] Initializing built-in extension DPMS [ 153.389] Initializing built-in extension X-Resource [ 153.389] Initializing built-in extension XVideo [ 153.389] Initializing built-in extension XVideo-MotionCompensation [ 153.389] Initializing built-in extension XFree86-VidModeExtension [ 153.389] Initializing built-in extension XFree86-DGA [ 153.389] Initializing built-in extension XFree86-DRI [ 153.389] Initializing built-in extension DRI2 [ 153.389] (II) LoadModule: "glx" [ 153.390] (II) Loading /opt/X11R7/lib/xorg/modules/extensions/libglx.so [ 153.390] (II) Module glx: vendor="X.Org Foundation" [ 153.390] compiled for 1.13.0, module version = 1.0.0 [ 153.390] ABI class: X.Org Server Extension, version 7.0 [ 153.390] (==) AIGLX enabled [ 153.390] Loading extension GLX [ 153.390] (==) Matched intel as autoconfigured driver 0 [ 153.390] (==) Matched intel as autoconfigured driver 1 [ 153.390] (==) Matched vesa as autoconfigured driver 2 [ 153.390] (==) Matched modesetting as autoconfigured driver 3 [ 153.390] (==) Matched fbdev as autoconfigured driver 4 [ 153.390] (==) Assigned the driver to the xf86ConfigLayout [ 153.390] (II) LoadModule: "intel" [ 153.390] (II) Loading /opt/X11R7/lib/xorg/modules/drivers/intel_drv.so [ 153.390] (II) Module intel: vendor="X.Org Foundation" [ 153.391] compiled for 1.13.0, module version = 2.20.13 [ 153.391] Module class: X.Org Video Driver [ 153.391] ABI class: X.Org Video Driver, version 13.1 [ 153.391] (II) LoadModule: "vesa" [ 153.391] (WW) Warning, couldn't open module vesa [ 153.391] (II) UnloadModule: "vesa" [ 153.391] (II) Unloading vesa [ 153.391] (EE) Failed to load module "vesa" (module does not exist, 0) [ 153.391] (II) LoadModule: "modesetting" [ 153.392] (WW) Warning, couldn't open module modesetting [ 153.392] (II) UnloadModule: "modesetting" [ 153.392] (II) Unloading modesetting [ 153.392] (EE) Failed to load module "modesetting" (module does not exist, 0) [ 153.392] (II) LoadModule: "fbdev" [ 153.393] (WW) Warning, couldn't open module fbdev [ 153.393] (II) UnloadModule: "fbdev" [ 153.393] (II) Unloading fbdev [ 153.393] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 153.393] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 153.394] (--) using VT number 2 [ 153.403] (II) intel(0): using device path '/dev/dri/card0' [ 153.403] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 153.403] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 153.403] (==) intel(0): RGB weight 888 [ 153.403] (==) intel(0): Default visual is TrueColor [ 153.403] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale [ 153.403] (**) intel(0): Relaxed fencing enabled [ 153.403] (**) intel(0): Wait on SwapBuffers? enabled [ 153.403] (**) intel(0): Triple buffering? enabled [ 153.403] (**) intel(0): Framebuffer tiled [ 153.403] (**) intel(0): Pixmaps tiled [ 153.403] (**) intel(0): 3D buffers tiled [ 153.403] (**) intel(0): SwapBuffers wait enabled [ 153.403] (==) intel(0): video overlay key set to 0x101fe [ 153.404] (II) intel(0): Output eDP1 has no monitor section [ 153.423] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 153.427] (II) intel(0): Output VGA1 has no monitor section [ 153.428] (II) intel(0): Output HDMI1 has no monitor section [ 153.452] (II) intel(0): Output DP1 has no monitor section [ 153.456] (II) intel(0): Output HDMI2 has no monitor section [ 153.460] (II) intel(0): Output HDMI3 has no monitor section [ 153.484] (II) intel(0): Output DP2 has no monitor section [ 153.508] (II) intel(0): Output DP3 has no monitor section [ 153.508] (II) intel(0): EDID for output eDP1 [ 153.508] (II) intel(0): Manufacturer: AUO Model: 25ec Serial#: 0 [ 153.508] (II) intel(0): Year: 2009 Week: 0 [ 153.508] (II) intel(0): EDID Version: 1.4 [ 153.508] (II) intel(0): Digital Display Input [ 153.508] (II) intel(0): 6 bits per channel [ 153.508] (II) intel(0): Digital interface is DisplayPort [ 153.508] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 153.508] (II) intel(0): Gamma: 2.20 [ 153.508] (II) intel(0): No DPMS capabilities specified [ 153.508] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 153.508] (II) intel(0): First detailed timing is preferred mode [ 153.508] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 153.508] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570 [ 153.508] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 153.508] (II) intel(0): Manufacturer's mask: 0 [ 153.508] (II) intel(0): Supported detailed timing: [ 153.508] (II) intel(0): clock: 69.0 MHz Image Size: 344 x 193 mm [ 153.508] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1426 h_border: 0 [ 153.508] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0 [ 153.508] (II) intel(0): Supported detailed timing: [ 153.508] (II) intel(0): clock: 46.0 MHz Image Size: 344 x 193 mm [ 153.508] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1426 h_border: 0 [ 153.508] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0 [ 153.508] (II) intel(0): T5CDR€B156XW2 [ 153.508] (II) intel(0): Unknown vendor-specific block 0 [ 153.508] (II) intel(0): EDID (in hex): [ 153.508] (II) intel(0): 00ffffffffffff0006afec2500000000 [ 153.508] (II) intel(0): 001301049522137802c8959e57549226 [ 153.508] (II) intel(0): 0f505400000001010101010101010101 [ 153.508] (II) intel(0): 010101010101f41a563c500026302018 [ 153.508] (II) intel(0): 340058c11000001af811563c50002630 [ 153.508] (II) intel(0): 2018340058c11000001a000000fe0054 [ 153.508] (II) intel(0): 35434452804231353658573200000000 [ 153.508] (II) intel(0): 00004121190000000009010a20200070 [ 153.508] (II) intel(0): EDID vendor "AUO", prod id 9708 [ 153.508] (II) intel(0): Printing DDC gathered Modelines: [ 153.508] (II) intel(0): Modeline "1366x768"x0.0 69.00 1366 1398 1422 1426 768 771 775 806 +hsync -vsync (48.4 kHz eP) [ 153.508] (II) intel(0): Modeline "1366x768"x0.0 46.00 1366 1398 1422 1426 768 771 775 806 +hsync -vsync (32.3 kHz e) [ 153.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 153.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 153.508] (II) intel(0): Printing probed modes for output eDP1 [ 153.508] (II) intel(0): Modeline "1366x768"x60.0 69.00 1366 1398 1422 1426 768 771 775 806 +hsync -vsync (48.4 kHz eP) [ 153.508] (II) intel(0): Modeline "1366x768"x40.0 46.00 1366 1398 1422 1426 768 771 775 806 +hsync -vsync (32.3 kHz e) [ 153.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 153.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 153.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 153.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 153.512] (II) intel(0): EDID for output VGA1 [ 153.513] (II) intel(0): EDID for output HDMI1 [ 153.537] (II) intel(0): EDID for output DP1 [ 153.541] (II) intel(0): EDID for output HDMI2 [ 153.545] (II) intel(0): EDID for output HDMI3 [ 153.569] (II) intel(0): EDID for output DP2 [ 153.593] (II) intel(0): EDID for output DP3 [ 153.593] (II) intel(0): Output eDP1 connected [ 153.593] (II) intel(0): Output VGA1 disconnected [ 153.593] (II) intel(0): Output HDMI1 disconnected [ 153.593] (II) intel(0): Output DP1 disconnected [ 153.593] (II) intel(0): Output HDMI2 disconnected [ 153.593] (II) intel(0): Output HDMI3 disconnected [ 153.593] (II) intel(0): Output DP2 disconnected [ 153.593] (II) intel(0): Output DP3 disconnected [ 153.593] (II) intel(0): Using exact sizes for initial modes [ 153.593] (II) intel(0): Output eDP1 using initial mode 1366x768 [ 153.593] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 153.593] (II) intel(0): Kernel page flipping support detected, enabling [ 153.593] (**) intel(0): Display dimensions: (340, 190) mm [ 153.593] (**) intel(0): DPI set to (102, 102) [ 153.593] (II) Loading sub module "fb" [ 153.593] (II) LoadModule: "fb" [ 153.593] (II) Loading /opt/X11R7/lib/xorg/modules/libfb.so [ 153.593] (II) Module fb: vendor="X.Org Foundation" [ 153.593] compiled for 1.13.0, module version = 1.0.0 [ 153.593] ABI class: X.Org ANSI C Emulation, version 0.4 [ 153.593] (II) Loading sub module "dri2" [ 153.593] (II) LoadModule: "dri2" [ 153.594] (II) Module "dri2" already built-in [ 153.594] (==) Depth 24 pixmap format is 32 bpp [ 153.594] (II) intel(0): [DRI2] Setup complete [ 153.594] (II) intel(0): [DRI2] DRI driver: i965 [ 153.594] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled [ 153.604] (II) UXA(0): Driver registered support for the following operations: [ 153.605] (II) solid [ 153.605] (II) copy [ 153.605] (II) composite (RENDER acceleration) [ 153.605] (II) put_image [ 153.605] (II) get_image [ 153.605] (==) intel(0): Backing store disabled [ 153.605] (==) intel(0): Silken mouse enabled [ 153.605] (II) intel(0): Initializing HW Cursor [ 153.605] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 153.685] (==) intel(0): DPMS enabled [ 153.685] (==) intel(0): Intel XvMC decoder enabled [ 153.685] (II) intel(0): Set up textured video [ 153.685] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 153.685] (II) intel(0): direct rendering: DRI2 Enabled [ 153.685] (==) intel(0): hotplug detection: "enabled" [ 153.714] (--) RandR disabled [ 153.723] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 153.723] (II) AIGLX: enabled GLX_INTEL_swap_event [ 153.723] (II) AIGLX: enabled GLX_ARB_create_context [ 153.723] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 153.723] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 153.723] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 153.723] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 153.723] (II) AIGLX: Loaded and initialized i965 [ 153.723] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 153.724] (II) intel(0): Setting screen physical size to 361 x 203 [ 153.765] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 153.765] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 153.765] (**) Power Button: Applying InputClass "system-setup-keyboard" [ 153.765] (II) LoadModule: "evdev" [ 153.765] (II) Loading /opt/X11R7/lib/xorg/modules/input/evdev_drv.so [ 153.765] (II) Module evdev: vendor="X.Org Foundation" [ 153.765] compiled for 1.13.0, module version = 2.7.0 [ 153.765] Module class: X.Org XInput Driver [ 153.765] ABI class: X.Org XInput driver, version 18.0 [ 153.765] (II) Using input driver 'evdev' for 'Power Button' [ 153.765] (**) Power Button: always reports core events [ 153.765] (**) evdev: Power Button: Device: "/dev/input/event4" [ 153.765] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 153.765] (--) evdev: Power Button: Found keys [ 153.765] (II) evdev: Power Button: Configuring as keyboard [ 153.765] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 153.765] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 153.765] (**) Option "xkb_rules" "evdev" [ 153.765] (**) Option "xkb_model" "pc105+inet" [ 153.765] (**) Option "xkb_layout" "us" [ 153.765] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 153.808] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 153.808] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 153.808] (**) Video Bus: Applying InputClass "system-setup-keyboard" [ 153.808] (II) Using input driver 'evdev' for 'Video Bus' [ 153.808] (**) Video Bus: always reports core events [ 153.808] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 153.808] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 153.808] (--) evdev: Video Bus: Found keys [ 153.808] (II) evdev: Video Bus: Configuring as keyboard [ 153.808] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input7/event7" [ 153.808] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 153.808] (**) Option "xkb_rules" "evdev" [ 153.808] (**) Option "xkb_model" "pc105+inet" [ 153.808] (**) Option "xkb_layout" "us" [ 153.808] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 153.809] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 153.809] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 153.809] (**) Power Button: Applying InputClass "system-setup-keyboard" [ 153.809] (II) Using input driver 'evdev' for 'Power Button' [ 153.809] (**) Power Button: always reports core events [ 153.809] (**) evdev: Power Button: Device: "/dev/input/event2" [ 153.809] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 153.809] (--) evdev: Power Button: Found keys [ 153.809] (II) evdev: Power Button: Configuring as keyboard [ 153.809] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 153.809] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 153.809] (**) Option "xkb_rules" "evdev" [ 153.809] (**) Option "xkb_model" "pc105+inet" [ 153.809] (**) Option "xkb_layout" "us" [ 153.809] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 153.809] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 153.809] (II) No input driver specified, ignoring this device. [ 153.809] (II) This device may have been added with another device file. [ 153.809] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 153.809] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 153.809] (**) Sleep Button: Applying InputClass "system-setup-keyboard" [ 153.809] (II) Using input driver 'evdev' for 'Sleep Button' [ 153.809] (**) Sleep Button: always reports core events [ 153.809] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 153.809] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 153.809] (--) evdev: Sleep Button: Found keys [ 153.809] (II) evdev: Sleep Button: Configuring as keyboard [ 153.809] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3" [ 153.809] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 153.809] (**) Option "xkb_rules" "evdev" [ 153.809] (**) Option "xkb_model" "pc105+inet" [ 153.809] (**) Option "xkb_layout" "us" [ 153.809] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 153.810] (II) config/udev: Adding drm device (/dev/dri/card0) [ 153.810] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 153.810] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 153.810] (**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard" [ 153.810] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 153.810] (**) AT Translated Set 2 keyboard: always reports core events [ 153.810] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 153.810] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 153.810] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 153.810] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 153.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 153.810] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 153.810] (**) Option "xkb_rules" "evdev" [ 153.810] (**) Option "xkb_model" "pc105+inet" [ 153.810] (**) Option "xkb_layout" "us" [ 153.810] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 153.811] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event5) [ 153.811] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall" [ 153.811] (II) Using input driver 'evdev' for 'DualPoint Stick' [ 153.811] (**) DualPoint Stick: always reports core events [ 153.811] (**) evdev: DualPoint Stick: Device: "/dev/input/event5" [ 153.811] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8 [ 153.811] (--) evdev: DualPoint Stick: Found 3 mouse buttons [ 153.811] (--) evdev: DualPoint Stick: Found relative axes [ 153.811] (--) evdev: DualPoint Stick: Found x and y relative axes [ 153.811] (II) evdev: DualPoint Stick: Configuring as mouse [ 153.811] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5 [ 153.811] (**) evdev: DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 153.811] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" [ 153.811] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 11) [ 153.811] (II) evdev: DualPoint Stick: initialized for relative axes. [ 153.811] (**) DualPoint Stick: (accel) keeping acceleration scheme 1 [ 153.811] (**) DualPoint Stick: (accel) acceleration profile 0 [ 153.811] (**) DualPoint Stick: (accel) acceleration factor: 2.000 [ 153.811] (**) DualPoint Stick: (accel) acceleration threshold: 4 [ 153.811] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0) [ 153.811] (II) No input driver specified, ignoring this device. [ 153.811] (II) This device may have been added with another device file. [ 153.811] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event6) [ 153.811] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall" [ 153.811] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall" [ 153.811] (II) LoadModule: "synaptics" [ 153.812] (WW) Warning, couldn't open module synaptics [ 153.812] (II) UnloadModule: "synaptics" [ 153.812] (II) Unloading synaptics [ 153.812] (EE) Failed to load module "synaptics" (module does not exist, 0) [ 153.812] (EE) No input driver matching `synaptics' [ 153.812] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1) [ 153.812] (II) No input driver specified, ignoring this device. [ 153.812] (II) This device may have been added with another device file. [ 153.812] (II) config/udev: Adding input device PC Speaker (/dev/input/event8) [ 153.812] (II) No input driver specified, ignoring this device. [ 153.812] (II) This device may have been added with another device file. [ 156.884] (EE) [ 156.884] (EE) Backtrace: [ 156.885] (EE) 0: X (xorg_backtrace+0x49) [0x80b2d49] [ 156.885] (EE) 1: X (0x8048000+0x6ffca) [0x80b7fca] [ 156.885] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb774140c] [ 156.885] (EE) 3: /opt/X11R7/lib/xorg/modules/drivers/intel_drv.so (0xb7465000+0xa476) [0xb746f476] [ 156.885] (EE) 4: /opt/X11R7/lib/xorg/modules/drivers/intel_drv.so (0xb7465000+0xb113) [0xb7470113] [ 156.885] (EE) 5: /opt/X11R7/lib/xorg/modules/drivers/intel_drv.so (0xb7465000+0xfd050) [0xb7562050] [ 156.885] (EE) 6: X (0x8048000+0x138be7) [0x8180be7] [ 156.885] (EE) 7: X (CompositePicture+0x226) [0x8173976] [ 156.885] (EE) 8: X (0x8048000+0x13167c) [0x817967c] [ 156.885] (EE) 9: X (0x8048000+0x12c291) [0x8174291] [ 156.885] (EE) 10: X (0x8048000+0x3263d) [0x807a63d] [ 156.885] (EE) 11: X (0x8048000+0x1fbac) [0x8067bac] [ 156.885] (EE) 12: /lib/libc.so.6 (__libc_start_main+0xf3) [0x467896b3] [ 156.885] (EE) 13: X (0x8048000+0x1ff59) [0x8067f59] [ 156.885] (EE) [ 156.885] (EE) Segmentation fault at address 0x60000 [ 156.885] Fatal server error: [ 156.885] Caught signal 11 (Segmentation fault). Server aborting [ 156.885] [ 156.885] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 156.885] (EE) Please also check the log file at "/opt/X11R7/var/log/Xorg.0.log" for additional information. [ 156.885] (EE) [ 156.902] (II) evdev: Power Button: Close [ 156.902] (II) UnloadModule: "evdev" [ 156.921] (II) evdev: Video Bus: Close [ 156.921] (II) UnloadModule: "evdev" [ 156.937] (II) evdev: Power Button: Close [ 156.937] (II) UnloadModule: "evdev" [ 156.953] (II) evdev: Sleep Button: Close [ 156.953] (II) UnloadModule: "evdev" [ 156.969] (II) evdev: AT Translated Set 2 keyboard: Close [ 156.969] (II) UnloadModule: "evdev" [ 156.985] (II) evdev: DualPoint Stick: Close [ 156.985] (II) UnloadModule: "evdev" [ 156.985] (II) AIGLX: Suspending AIGLX clients for VT switch [ 157.012] Server terminated with error (1). Closing log file.