[ 0.000000] Linux version 3.6.8 (root@montroll.chem.mcgill.ca) (gcc version 4.7.2 (GCC) ) #43 SMP Sun Dec 2 14:04:15 EST 2012 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000047f6ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000047f70000-0x0000000047f7cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000047f7d000-0x0000000047f7ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000047f80000-0x0000000047ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000057f80000-0x0000000057ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI present. [ 0.000000] DMI: Hewlett-Packard Pavilion zv5000 (PF126UA#ABL) /089C, BIOS F.23 06/04/2004 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x47f70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FF8000000 write-back [ 0.000000] 2 base 047F80000 mask FFFF80000 uncachable [ 0.000000] 3 base 057F80000 mask FFFF80000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f6570-0x000f657f] mapped at [c00f6570] [ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017fa000-0x017fffff] [ 0.000000] ACPI: RSDP 000f6600 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 47f791c8 00030 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 47f7ceed 00074 (v01 HP Chinook 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 47f791f8 03CF5 (v01 HP SB200 06040000 INTL 20030509) [ 0.000000] ACPI: FACS 47f7ffc0 00040 [ 0.000000] ACPI: APIC 47f7cf61 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 47f7cfc9 00037 (v01 PTLTD ACPIHT 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 263MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x47f6ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x47f6ffff] [ 0.000000] On node 0 totalpages: 294655 [ 0.000000] free_area_init_node: node 0, pgdat c1475800, node_mem_map f6efd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 527 pages used for memmap [ 0.000000] HighMem zone: 66915 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] e820: [mem 0x58000000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6edd000 s27008 r0 d22144 u49152 [ 0.000000] pcpu-alloc: s27008 r0 d22144 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 292352 [ 0.000000] Kernel command line: BOOT_IMAGE=Linux-3.6.8 ro root=302 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:00047f70) [ 0.000000] Memory: 1162972k/1179072k available (3340k kernel code, 15648k reserved, 1249k data, 460k init, 269768k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc147c000 - 0xc14ef000 ( 460 kB) [ 0.000000] .data : 0xc13432e0 - 0xc147b780 (1249 kB) [ 0.000000] .text : 0xc1000000 - 0xc13432e0 (3340 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f680a000 soft=f680c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3000.103 MHz processor [ 0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.20 BogoMIPS (lpj=3000103) [ 0.002109] pid_max: default: 32768 minimum: 301 [ 0.002196] Security Framework initialized [ 0.002269] Mount-cache hash table entries: 512 [ 0.002604] CPU: Physical Processor ID: 0 [ 0.002658] CPU: Processor Core ID: 0 [ 0.003004] mce: CPU supports 4 MCE banks [ 0.003066] CPU0: Thermal monitoring enabled (TM1) [ 0.003140] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 [ 0.003140] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64 [ 0.003140] tlb_flushall_shift is 0x6 [ 0.003334] ACPI: Core revision 20120711 [ 0.006109] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.007237] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.007998] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.007998] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.007998] ..... (found apic 0 pin 2) ... [ 0.018485] ....... works. [ 0.018537] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 [ 0.018997] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.018997] ... version: 0 [ 0.018997] ... bit width: 40 [ 0.018997] ... generic registers: 18 [ 0.018997] ... value mask: 000000ffffffffff [ 0.018997] ... max period: 0000007fffffffff [ 0.018997] ... fixed-purpose events: 0 [ 0.018997] ... event mask: 000000000003ffff [ 0.018997] CPU 1 irqstacks, hard=f6882000 soft=f6884000 [ 0.018997] smpboot: Booting Node 0, Processors #1 OK [ 0.002999] Initializing CPU#1 [ 0.002999] calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4274034932 >=post_end=9062812 [ 0.090026] Brought up 2 CPUs [ 0.090186] smpboot: Total of 2 processors activated (11999.30 BogoMIPS) [ 0.090997] devtmpfs: initialized [ 0.091315] PM: Registering ACPI NVS region [mem 0x47f7d000-0x47f7ffff] (12288 bytes) [ 0.091463] RTC time: 17:32:08, date: 12/09/12 [ 0.091579] NET: Registered protocol family 16 [ 0.092034] EISA bus registered [ 0.092125] ACPI: bus type pci registered [ 0.092188] PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2 [ 0.092188] PCI: Using configuration type 1 for base access [ 0.099042] bio: create slab at 0 [ 0.099140] ACPI: Added _OSI(Module Device) [ 0.099140] ACPI: Added _OSI(Processor Device) [ 0.099140] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.099184] ACPI: Added _OSI(Processor Aggregator Device) [ 0.100667] ACPI: EC: Look up EC in DSDT [ 0.103338] ACPI: Interpreter enabled [ 0.103407] ACPI: (supports S0 S3 S4 S5) [ 0.103561] ACPI: Using IOAPIC for interrupt routing [ 0.161076] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 [ 0.161154] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.162135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.163140] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.163146] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.163150] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) [ 0.163154] pci_root PNP0A03:00: host bridge window [mem 0x48000000-0xfebfffff] (ignored) [ 0.163158] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.163161] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.163165] PCI: root bus 00: using default resources [ 0.163170] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.163297] PCI host bridge to bus 0000:00 [ 0.163297] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.163297] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.163297] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.163297] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.163297] pci 0000:00:00.0: [1002:5833] type 00 class 0x060000 [ 0.163297] pci 0000:00:00.0: reg 10: [mem 0xd2000000-0xd3ffffff pref] [ 0.163297] pci 0000:00:00.0: reg 14: [mem 0xd0000000-0xd0000fff] [ 0.163307] pci 0000:00:01.0: [1002:5838] type 01 class 0x060400 [ 0.163354] pci 0000:00:13.0: [1002:4347] type 00 class 0x0c0310 [ 0.163366] pci 0000:00:13.0: reg 10: [mem 0xd0001000-0xd0001fff] [ 0.163416] pci 0000:00:13.1: [1002:4348] type 00 class 0x0c0310 [ 0.163428] pci 0000:00:13.1: reg 10: [mem 0xd0002000-0xd0002fff] [ 0.163483] pci 0000:00:14.0: [1002:4353] type 00 class 0x0c0500 [ 0.163494] pci 0000:00:14.0: reg 10: [io 0x8040-0x804f] [ 0.163502] pci 0000:00:14.0: reg 14: [mem 0x00000000-0x000003ff] [ 0.163545] pci 0000:00:14.1: [1002:4349] type 00 class 0x01018a [ 0.163557] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7] [ 0.163565] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7] [ 0.163574] pci 0000:00:14.1: reg 18: [io 0x0170-0x0177] [ 0.163582] pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377] [ 0.163591] pci 0000:00:14.1: reg 20: [io 0x8060-0x806f] [ 0.163628] pci 0000:00:14.3: [1002:434c] type 00 class 0x060100 [ 0.164047] pci 0000:00:14.4: [1002:4342] type 01 class 0x060401 [ 0.164083] pci 0000:00:14.5: [1002:4341] type 00 class 0x040100 [ 0.164095] pci 0000:00:14.5: reg 10: [mem 0xd0003000-0xd00030ff] [ 0.164143] pci 0000:00:14.6: [1002:434d] type 00 class 0x070300 [ 0.164154] pci 0000:00:14.6: reg 10: [mem 0xd0003400-0xd00034ff] [ 0.164218] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff] [ 0.164237] pci 0000:01:05.0: [1002:5835] type 00 class 0x030000 [ 0.164253] pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref] [ 0.164262] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff] [ 0.164271] pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff] [ 0.164297] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.164327] pci 0000:01:05.0: supports D1 D2 [ 0.164360] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.164416] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.164421] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.164426] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] [ 0.164439] pci_bus 0000:02: busn_res: [bus 02-04] is inserted under [bus 00-ff] [ 0.164453] pci 0000:02:00.0: [104c:8026] type 00 class 0x0c0010 [ 0.164472] pci 0000:02:00.0: reg 10: [mem 0xd0208000-0xd02087ff] [ 0.164484] pci 0000:02:00.0: reg 14: [mem 0xd0200000-0xd0203fff] [ 0.164558] pci 0000:02:00.0: supports D1 D2 [ 0.164561] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.164582] pci 0000:02:02.0: [14e4:4320] type 00 class 0x028000 [ 0.164596] pci 0000:02:02.0: reg 10: [mem 0xd0204000-0xd0205fff] [ 0.164668] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000 [ 0.164687] pci 0000:02:03.0: reg 10: [io 0xa000-0xa0ff] [ 0.164699] pci 0000:02:03.0: reg 14: [mem 0xd0208800-0xd02088ff] [ 0.164769] pci 0000:02:03.0: supports D1 D2 [ 0.164772] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold [ 0.164794] pci 0000:02:04.0: [104c:ac54] type 02 class 0x060700 [ 0.164813] pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.164844] pci 0000:02:04.0: supports D1 D2 [ 0.164847] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164869] pci 0000:02:04.1: [104c:ac54] type 02 class 0x060700 [ 0.164888] pci 0000:02:04.1: reg 10: [mem 0x00000000-0x00000fff] [ 0.164920] pci 0000:02:04.1: supports D1 D2 [ 0.164922] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164948] pci 0000:02:04.2: [104c:8201] type 00 class 0x088000 [ 0.164965] pci 0000:02:04.2: reg 10: [io 0xa400-0xa43f] [ 0.165075] pci 0000:02:07.0: [1033:0035] type 00 class 0x0c0310 [ 0.165095] pci 0000:02:07.0: reg 10: [mem 0xd0206000-0xd0206fff] [ 0.165171] pci 0000:02:07.0: supports D1 D2 [ 0.165174] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165196] pci 0000:02:07.1: [1033:0035] type 00 class 0x0c0310 [ 0.165214] pci 0000:02:07.1: reg 10: [mem 0xd0207000-0xd0207fff] [ 0.165290] pci 0000:02:07.1: supports D1 D2 [ 0.165293] pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165313] pci 0000:02:07.2: [1033:00e0] type 00 class 0x0c0320 [ 0.165332] pci 0000:02:07.2: reg 10: [mem 0xd0208c00-0xd0208cff] [ 0.165408] pci 0000:02:07.2: supports D1 D2 [ 0.165410] pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165459] pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode) [ 0.165518] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.165523] pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff] [ 0.165528] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.165531] pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.165536] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.165624] pci 0000:02:04.1: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.165739] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-04] (conflicts with (null) [bus 02-04]) [ 0.165745] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 [ 0.165748] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 02-04] [ 0.165781] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 02-04] (conflicts with (null) [bus 02-04]) [ 0.165787] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07 [ 0.165791] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 02-04] (conflicts with (null) [bus 02-04]) [ 0.165796] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04] [ 0.165888] pci_bus 0000:00: on NUMA node 0 [ 0.165894] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.165968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.166032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.166213] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.166297] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.169143] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled. [ 0.169339] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled. [ 0.170033] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled. [ 0.170298] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled. [ 0.170528] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.170528] vgaarb: loaded [ 0.170528] vgaarb: bridge control possible 0000:01:05.0 [ 0.171162] SCSI subsystem initialized [ 0.171162] ACPI: bus type usb registered [ 0.171162] usbcore: registered new interface driver usbfs [ 0.171162] usbcore: registered new interface driver hub [ 0.171162] usbcore: registered new device driver usb [ 0.172012] PCI: Using ACPI for IRQ routing [ 0.172051] PCI: pci_cache_line_size set to 64 bytes [ 0.172159] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.172163] e820: reserve RAM buffer [mem 0x47f70000-0x47ffffff] [ 0.173047] NetLabel: Initializing [ 0.173047] NetLabel: domain hash size = 128 [ 0.173047] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.173102] NetLabel: unlabeled traffic allowed by default [ 0.173180] cfg80211: Calling CRDA to update world regulatory domain [ 0.173281] pnp: PnP ACPI init [ 0.173281] ACPI: bus type pnp registered [ 0.174412] pnp 00:00: [bus 00-ff] [ 0.174418] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.174421] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.174424] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.174427] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.174431] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.174434] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.174437] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.174440] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.174443] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.174446] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.174450] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.174453] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.174456] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.174459] pnp 00:00: [mem 0x48000000-0xfebfffff window] [ 0.174463] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.174467] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.174470] pnp 00:00: [io 0x0d00-0xffff window] [ 0.174538] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.174538] pnp 00:01: [io 0x0000-0x001f] [ 0.174538] pnp 00:01: [io 0x0080-0x008f] [ 0.174538] pnp 00:01: [io 0x00c0-0x00df] [ 0.174538] pnp 00:01: [io 0x040b] [ 0.174538] pnp 00:01: [io 0x04d6] [ 0.174538] pnp 00:01: [dma 4] [ 0.174538] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.174538] pnp 00:02: [io 0x00f0-0x00fe] [ 0.174538] pnp 00:02: [irq 13] [ 0.175008] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.175027] pnp 00:03: [io 0x0070-0x0073] [ 0.175035] pnp 00:03: [irq 8] [ 0.175083] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.175083] pnp 00:04: [io 0x0061] [ 0.175083] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.175083] pnp 00:05: [io 0x0060] [ 0.175083] pnp 00:05: [io 0x0064] [ 0.175083] pnp 00:05: [irq 1] [ 0.175083] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.175083] pnp 00:06: [irq 12] [ 0.175083] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.175112] pnp 00:07: [io 0x002e-0x002f] [ 0.175115] pnp 00:07: [io 0x004e-0x004f] [ 0.175118] pnp 00:07: [io 0x00b0-0x00b1] [ 0.175121] pnp 00:07: [io 0x0092] [ 0.175124] pnp 00:07: [io 0x0200-0x020f] [ 0.175127] pnp 00:07: [io 0x0c14] [ 0.175130] pnp 00:07: [io 0x0c50-0x0c52] [ 0.175133] pnp 00:07: [io 0x0c6c] [ 0.175135] pnp 00:07: [io 0x0c6f] [ 0.175138] pnp 00:07: [io 0x0cd6-0x0cd7] [ 0.175141] pnp 00:07: [io 0x1080] [ 0.175144] pnp 00:07: [io 0x8000-0x8068] [ 0.175147] pnp 00:07: [io 0x8800] [ 0.175149] pnp 00:07: [io 0xfe00] [ 0.175152] pnp 00:07: [io 0xfe10-0xfe11] [ 0.175155] pnp 00:07: [mem 0x000e4000-0x000fffff] [ 0.175159] pnp 00:07: [mem 0x00100000-0x47ffffff] [ 0.175162] pnp 00:07: [mem 0xd0000000-0xd0000fff] [ 0.175165] pnp 00:07: [mem 0xfff80000-0xffffffff] [ 0.175188] pnp 00:07: disabling [io 0x8000-0x8068] because it overlaps 0000:00:14.1 BAR 4 [io 0x8060-0x806f] [ 0.175352] system 00:07: [io 0x0200-0x020f] has been reserved [ 0.175352] system 00:07: [io 0x0c14] has been reserved [ 0.176038] system 00:07: [io 0x0c50-0x0c52] has been reserved [ 0.176093] system 00:07: [io 0x0c6c] has been reserved [ 0.176148] system 00:07: [io 0x0c6f] has been reserved [ 0.176202] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.176987] system 00:07: [io 0x1080] has been reserved [ 0.177042] system 00:07: [io 0x8800] has been reserved [ 0.177097] system 00:07: [io 0xfe00] has been reserved [ 0.177151] system 00:07: [io 0xfe10-0xfe11] has been reserved [ 0.177207] system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved [ 0.177262] system 00:07: [mem 0x00100000-0x47ffffff] could not be reserved [ 0.177318] system 00:07: [mem 0xd0000000-0xd0000fff] has been reserved [ 0.177373] system 00:07: [mem 0xfff80000-0xffffffff] has been reserved [ 0.177431] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.177598] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (disabled) [ 0.179134] pnp 00:09: [io 0x0378-0x037f] [ 0.179138] pnp 00:09: [io 0x0778-0x077b] [ 0.179151] pnp 00:09: [irq 7] [ 0.179154] pnp 00:09: [dma 1] [ 0.179243] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.199989] pnp: PnP ACPI: found 10 devices [ 0.200044] ACPI: ACPI bus type pnp unregistered [ 0.240249] Switching to clocksource acpi_pm [ 0.240390] pci 0000:02:04.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.240396] pci 0000:02:04.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.240404] pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-04] add_size 8000000 [ 0.240414] pci 0000:00:14.4: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 8000000 [ 0.240422] pci 0000:00:14.4: BAR 9: assigned [mem 0x58000000-0x5fffffff pref] [ 0.240506] pci 0000:00:14.0: BAR 1: assigned [mem 0x60000000-0x600003ff] [ 0.240567] pci 0000:01:05.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref] [ 0.240650] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.240705] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.240760] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.240816] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] [ 0.240905] pci 0000:02:04.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.240908] pci 0000:02:04.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.240912] pci 0000:02:04.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.240916] pci 0000:02:04.1: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.240919] pci 0000:02:04.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.240923] pci 0000:02:04.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.240926] pci 0000:02:04.1: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.240929] pci 0000:02:04.1: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.240934] pci 0000:02:04.0: BAR 0: assigned [mem 0x64000000-0x64000fff] [ 0.240934] pci 0000:02:04.0: BAR 9: assigned [mem 0x58000000-0x5bffffff pref] [ 0.240934] pci 0000:02:04.0: BAR 10: assigned [mem 0x68000000-0x6bffffff] [ 0.240934] pci 0000:02:04.1: BAR 0: assigned [mem 0x6c000000-0x6c000fff] [ 0.240934] pci 0000:02:04.1: BAR 9: assigned [mem 0x5c000000-0x5fffffff pref] [ 0.240972] pci 0000:02:04.1: BAR 10: assigned [mem 0x70000000-0x73ffffff] [ 0.241072] pci 0000:02:04.0: BAR 7: assigned [io 0xa800-0xa8ff] [ 0.241128] pci 0000:02:04.0: BAR 8: assigned [io 0xac00-0xacff] [ 0.241185] pci 0000:02:04.1: BAR 7: assigned [io 0x1400-0x14ff] [ 0.241242] pci 0000:02:04.1: BAR 8: assigned [io 0x1800-0x18ff] [ 0.241298] pci 0000:02:04.0: CardBus bridge to [bus 03] [ 0.241352] pci 0000:02:04.0: bridge window [io 0xa800-0xa8ff] [ 0.241408] pci 0000:02:04.0: bridge window [io 0xac00-0xacff] [ 0.241465] pci 0000:02:04.0: bridge window [mem 0x58000000-0x5bffffff pref] [ 0.241549] pci 0000:02:04.0: bridge window [mem 0x68000000-0x6bffffff] [ 0.241606] pci 0000:02:04.1: CardBus bridge to [bus 04-07] [ 0.241659] pci 0000:02:04.1: bridge window [io 0x1400-0x14ff] [ 0.241715] pci 0000:02:04.1: bridge window [io 0x1800-0x18ff] [ 0.241772] pci 0000:02:04.1: bridge window [mem 0x5c000000-0x5fffffff pref] [ 0.241855] pci 0000:02:04.1: bridge window [mem 0x70000000-0x73ffffff] [ 0.241912] pci 0000:00:14.4: PCI bridge to [bus 02-04] [ 0.241967] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.242031] pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff] [ 0.242088] pci 0000:00:14.4: bridge window [mem 0x58000000-0x5fffffff pref] [ 0.242232] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.242236] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.242239] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.242242] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff] [ 0.242245] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref] [ 0.242249] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.242252] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd02fffff] [ 0.242255] pci_bus 0000:02: resource 2 [mem 0x58000000-0x5fffffff pref] [ 0.242258] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.242261] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.242265] pci_bus 0000:03: resource 0 [io 0xa800-0xa8ff] [ 0.242268] pci_bus 0000:03: resource 1 [io 0xac00-0xacff] [ 0.242271] pci_bus 0000:03: resource 2 [mem 0x58000000-0x5bffffff pref] [ 0.242274] pci_bus 0000:03: resource 3 [mem 0x68000000-0x6bffffff] [ 0.242277] pci_bus 0000:04: resource 0 [io 0x1400-0x14ff] [ 0.242280] pci_bus 0000:04: resource 1 [io 0x1800-0x18ff] [ 0.242283] pci_bus 0000:04: resource 2 [mem 0x5c000000-0x5fffffff pref] [ 0.242286] pci_bus 0000:04: resource 3 [mem 0x70000000-0x73ffffff] [ 0.242347] NET: Registered protocol family 2 [ 0.242625] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.244512] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.245776] TCP: Hash tables configured (established 131072 bind 65536) [ 0.246030] TCP: reno registered [ 0.246092] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.246182] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.246434] NET: Registered protocol family 1 [ 0.348044] pci 0000:01:05.0: Boot video device [ 0.450042] PCI: CLS 32 bytes, default 64 [ 0.451399] bounce pool size: 64 pages [ 0.451464] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.457114] msgmni has been set to 1744 [ 0.457997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.458111] io scheduler noop registered [ 0.458163] io scheduler deadline registered [ 0.458222] io scheduler cfq registered (default) [ 0.458900] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.458953] crc32: self tests passed, processed 225944 bytes in 298084 nsec [ 0.459343] crc32c: CRC_LE_BITS = 64 [ 0.459395] crc32c: self tests passed, processed 225944 bytes in 135213 nsec [ 0.459763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.459996] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.461174] Non-volatile memory driver v1.3 [ 0.463144] loop: module loaded [ 0.463203] Uniform Multi-Platform E-IDE driver [ 0.463393] atiixp 0000:00:14.1: IDE controller (0x1002:0x4349 rev 0x00) [ 0.463490] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later [ 0.463548] ide0: BM-DMA at 0x8060-0x8067 [ 0.463612] ide1: BM-DMA at 0x8068-0x806f [ 0.463676] Probing IDE interface ide0... [ 0.727189] hda: ST9100823A, ATA DISK drive [ 1.339124] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.340587] hda: UDMA/100 mode selected [ 1.342472] Probing IDE interface ide1... [ 1.452020] tsc: Refined TSC clocksource calibration: 3000.105 MHz [ 1.452080] Switching to clocksource tsc [ 2.014183] hdc: SD-R2512, ATAPI CD/DVD-ROM drive [ 2.626096] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.666083] hdc: MWDMA2 mode selected [ 2.666575] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.759876] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.767755] ide-gd driver 1.18 [ 2.767837] hda: max request size: 128KiB [ 2.768031] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63 [ 2.768304] hda: cache flushes supported [ 2.781663] hda: hda1 hda2 [ 2.782162] ide-cd driver 5.00 [ 2.784303] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [ 2.784463] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.797490] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 2.798167] 8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0xf8010800, 00:0f:b0:01:82:2d, IRQ 19 [ 2.798349] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006b] [ 2.798421] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions [ 2.798506] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI [ 2.798588] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI [ 2.798645] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64 [ 3.021767] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cd8, PCI irq 17 [ 3.021826] yenta_cardbus 0000:02:04.0: Socket status: 30000086 [ 3.021885] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff] [ 3.021970] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: [ 3.022856] excluding 0xa000-0xa0ff 0xa400-0xa43f 0xa800-0xa8ff 0xac00-0xacff [ 3.025762] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff] [ 3.025847] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: [ 3.025929] excluding 0xd0200000-0xd020ffff [ 3.026043] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x58000000-0x5fffffff pref] [ 3.026128] pcmcia_socket pcmcia_socket0: cs: memory probe 0x58000000-0x5fffffff: [ 3.026219] excluding 0x58000000-0x5fffffff [ 3.026605] yenta_cardbus 0000:02:04.1: CardBus bridge found [103c:006b] [ 3.026677] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI [ 3.026760] yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI [ 3.026817] yenta_cardbus 0000:02:04.1: TI: mfunc 0x01111d22, devctl 0x64 [ 3.249763] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0cd8, PCI irq 16 [ 3.249820] yenta_cardbus 0000:02:04.1: Socket status: 30000006 [ 3.249876] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 3.249962] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [io 0xa000-0xafff] [ 3.250055] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xafff: [ 3.250933] excluding 0xa000-0xa0ff 0xa400-0xa43f 0xa800-0xa8ff 0xac00-0xacff [ 3.253834] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff] [ 3.253918] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xd02fffff: [ 3.254007] excluding 0xd0200000-0xd020ffff [ 3.254115] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0x58000000-0x5fffffff pref] [ 3.254199] pcmcia_socket pcmcia_socket1: cs: memory probe 0x58000000-0x5fffffff: [ 3.254290] excluding 0x58000000-0x5fffffff [ 3.254855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.254913] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 [ 3.254964] ehci_hcd 0000:02:07.2: EHCI Host Controller [ 3.255126] ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 [ 3.255216] ehci_hcd 0000:02:07.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5 [ 3.255224] ehci_hcd 0000:02:07.2: reset portroute 1 0 1 0 0 [ 3.255228] ehci_hcd 0000:02:07.2: reset hcc_params e806 thresh 0 uframes 256/512/1024 park [ 3.255259] ehci_hcd 0000:02:07.2: park 0 [ 3.255269] ehci_hcd 0000:02:07.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 3.255281] ehci_hcd 0000:02:07.2: ...powerup ports... [ 3.276014] ehci_hcd 0000:02:07.2: MWI active [ 3.276018] ehci_hcd 0000:02:07.2: supports USB remote wakeup [ 3.276041] ehci_hcd 0000:02:07.2: irq 19, io mem 0xd0208c00 [ 3.276099] ehci_hcd 0000:02:07.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 3.282012] ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00 [ 3.282112] usb usb1: default language 0x0409 [ 3.282122] usb usb1: udev 1, busnum 1, minor = 0 [ 3.282126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.282180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.282263] usb usb1: Product: EHCI Host Controller [ 3.282316] usb usb1: Manufacturer: Linux 3.6.8 ehci_hcd [ 3.282369] usb usb1: SerialNumber: 0000:02:07.2 [ 3.282583] usb usb1: usb_probe_device [ 3.282588] usb usb1: configuration #1 chosen from 1 choice [ 3.282599] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 3.282671] hub 1-0:1.0: usb_probe_interface [ 3.282675] hub 1-0:1.0: usb_probe_interface - got id [ 3.282678] hub 1-0:1.0: USB hub found [ 3.282735] hub 1-0:1.0: 5 ports detected [ 3.282789] hub 1-0:1.0: standalone hub [ 3.282791] hub 1-0:1.0: individual port power switching [ 3.282794] hub 1-0:1.0: individual port over-current protection [ 3.282797] hub 1-0:1.0: power on to power good time: 20ms [ 3.282803] hub 1-0:1.0: local power source is good [ 3.282808] hub 1-0:1.0: enabling power on all ports [ 3.282962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.283029] ohci_hcd: block sizes: ed 64 td 64 [ 3.283072] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.283220] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 3.283332] ohci_hcd 0000:00:13.0: created debug files [ 3.283344] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0001000 [ 3.338039] ohci_hcd 0000:00:13.0: OHCI controller state [ 3.338045] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running [ 3.338049] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 [ 3.338053] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 3.338058] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF [ 3.338062] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 3.338070] ohci_hcd 0000:00:13.0: hcca frame #0005 [ 3.338075] ohci_hcd 0000:00:13.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) [ 3.338079] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 3.338083] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE [ 3.338088] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 3.338092] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 3.338096] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS [ 3.338112] usb usb2: default language 0x0409 [ 3.338122] usb usb2: udev 1, busnum 2, minor = 128 [ 3.338125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.338181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.338264] usb usb2: Product: OHCI Host Controller [ 3.338317] usb usb2: Manufacturer: Linux 3.6.8 ohci_hcd [ 3.338370] usb usb2: SerialNumber: 0000:00:13.0 [ 3.338585] usb usb2: usb_probe_device [ 3.338590] usb usb2: configuration #1 chosen from 1 choice [ 3.338600] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 3.338666] hub 2-0:1.0: usb_probe_interface [ 3.338669] hub 2-0:1.0: usb_probe_interface - got id [ 3.338673] hub 2-0:1.0: USB hub found [ 3.338732] hub 2-0:1.0: 3 ports detected [ 3.338786] hub 2-0:1.0: standalone hub [ 3.338788] hub 2-0:1.0: no power switching (usb 1.0) [ 3.338791] hub 2-0:1.0: global over-current protection [ 3.338794] hub 2-0:1.0: power on to power good time: 4ms [ 3.338801] hub 2-0:1.0: local power source is good [ 3.338804] hub 2-0:1.0: no over-current condition exists [ 3.338807] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 3.338903] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.339084] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 3.339193] ohci_hcd 0000:00:13.1: created debug files [ 3.339204] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0002000 [ 3.382023] ehci_hcd 0000:02:07.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT [ 3.382029] hub 1-0:1.0: port 1: status 0501 change 0001 [ 3.394039] ohci_hcd 0000:00:13.1: OHCI controller state [ 3.394044] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers, rh state running [ 3.394048] ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 [ 3.394052] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 [ 3.394056] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF [ 3.394061] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 3.394068] ohci_hcd 0000:00:13.1: hcca frame #0005 [ 3.394073] ohci_hcd 0000:00:13.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) [ 3.394077] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 3.394081] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE [ 3.394085] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS [ 3.394090] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS [ 3.394094] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS [ 3.394110] usb usb3: default language 0x0409 [ 3.394119] usb usb3: udev 1, busnum 3, minor = 256 [ 3.394123] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.394851] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.394933] usb usb3: Product: OHCI Host Controller [ 3.394987] usb usb3: Manufacturer: Linux 3.6.8 ohci_hcd [ 3.395047] usb usb3: SerialNumber: 0000:00:13.1 [ 3.395256] usb usb3: usb_probe_device [ 3.395260] usb usb3: configuration #1 chosen from 1 choice [ 3.395271] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 3.395334] hub 3-0:1.0: usb_probe_interface [ 3.395337] hub 3-0:1.0: usb_probe_interface - got id [ 3.395340] hub 3-0:1.0: USB hub found [ 3.395399] hub 3-0:1.0: 3 ports detected [ 3.395452] hub 3-0:1.0: standalone hub [ 3.395455] hub 3-0:1.0: no power switching (usb 1.0) [ 3.395458] hub 3-0:1.0: global over-current protection [ 3.395460] hub 3-0:1.0: power on to power good time: 4ms [ 3.395467] hub 3-0:1.0: local power source is good [ 3.395469] hub 3-0:1.0: no over-current condition exists [ 3.395472] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 3.395568] ohci_hcd 0000:02:07.0: OHCI Host Controller [ 3.395726] ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4 [ 3.395814] ohci_hcd 0000:02:07.0: enabled NEC chipset lost interrupt quirk [ 3.395840] ohci_hcd 0000:02:07.0: created debug files [ 3.395843] ohci_hcd 0000:02:07.0: supports USB remote wakeup [ 3.395854] ohci_hcd 0000:02:07.0: irq 16, io mem 0xd0206000 [ 3.438035] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 3.476021] ohci_hcd 0000:02:07.0: OHCI controller state [ 3.476027] ohci_hcd 0000:02:07.0: OHCI 1.0, NO legacy support registers, rh state running [ 3.476031] ohci_hcd 0000:02:07.0: control 0x283 RWC HCFS=operational CBSR=3 [ 3.476035] ohci_hcd 0000:02:07.0: cmdstatus 0x00000 SOC=0 [ 3.476039] ohci_hcd 0000:02:07.0: intrstatus 0x00000004 SF [ 3.476043] ohci_hcd 0000:02:07.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 3.476050] ohci_hcd 0000:02:07.0: hcca frame #001f [ 3.476054] ohci_hcd 0000:02:07.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3) [ 3.476058] ohci_hcd 0000:02:07.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 3.476062] ohci_hcd 0000:02:07.0: roothub.status 00008000 DRWE [ 3.476066] ohci_hcd 0000:02:07.0: roothub.portstatus [0] 0x00000100 PPS [ 3.476070] ohci_hcd 0000:02:07.0: roothub.portstatus [1] 0x00000100 PPS [ 3.476074] ohci_hcd 0000:02:07.0: roothub.portstatus [2] 0x00000100 PPS [ 3.476088] usb usb4: default language 0x0409 [ 3.476098] usb usb4: udev 1, busnum 4, minor = 384 [ 3.476101] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.476157] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.476239] usb usb4: Product: OHCI Host Controller [ 3.476292] usb usb4: Manufacturer: Linux 3.6.8 ohci_hcd [ 3.476345] usb usb4: SerialNumber: 0000:02:07.0 [ 3.476551] usb usb4: usb_probe_device [ 3.476556] usb usb4: configuration #1 chosen from 1 choice [ 3.476566] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 3.476638] hub 4-0:1.0: usb_probe_interface [ 3.476641] hub 4-0:1.0: usb_probe_interface - got id [ 3.476644] hub 4-0:1.0: USB hub found [ 3.476702] hub 4-0:1.0: 3 ports detected [ 3.476755] hub 4-0:1.0: standalone hub [ 3.476758] hub 4-0:1.0: no power switching (usb 1.0) [ 3.476760] hub 4-0:1.0: global over-current protection [ 3.476763] hub 4-0:1.0: power on to power good time: 30ms [ 3.476769] hub 4-0:1.0: local power source is good [ 3.476772] hub 4-0:1.0: no over-current condition exists [ 3.476775] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 3.476840] ehci_hcd 0000:02:07.2: HS companion for 0000:02:07.0 [ 3.476874] ohci_hcd 0000:02:07.1: OHCI Host Controller [ 3.477038] ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5 [ 3.477126] ohci_hcd 0000:02:07.1: enabled NEC chipset lost interrupt quirk [ 3.477148] ohci_hcd 0000:02:07.1: created debug files [ 3.477152] ohci_hcd 0000:02:07.1: supports USB remote wakeup [ 3.477177] ohci_hcd 0000:02:07.1: irq 18, io mem 0xd0207000 [ 3.482023] hub 1-0:1.0: state 7 ports 5 chg 0002 evt 0000 [ 3.482034] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 3.482045] ehci_hcd 0000:02:07.2: port 1 low speed --> companion [ 3.533021] ehci_hcd 0000:02:07.2: GetStatus port:1 status 003402 0 ACK POWER OWNER sig=k CSC [ 3.533043] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002 [ 3.533052] ehci_hcd 0000:02:07.2: GetStatus port:1 status 003402 0 ACK POWER OWNER sig=k CSC [ 3.533060] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 3.558023] ohci_hcd 0000:02:07.1: OHCI controller state [ 3.558028] ohci_hcd 0000:02:07.1: OHCI 1.0, NO legacy support registers, rh state running [ 3.558032] ohci_hcd 0000:02:07.1: control 0x283 RWC HCFS=operational CBSR=3 [ 3.558036] ohci_hcd 0000:02:07.1: cmdstatus 0x00000 SOC=0 [ 3.558040] ohci_hcd 0000:02:07.1: intrstatus 0x00000004 SF [ 3.558045] ohci_hcd 0000:02:07.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 3.558052] ohci_hcd 0000:02:07.1: hcca frame #001f [ 3.558056] ohci_hcd 0000:02:07.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2) [ 3.558060] ohci_hcd 0000:02:07.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 3.558064] ohci_hcd 0000:02:07.1: roothub.status 00008000 DRWE [ 3.558068] ohci_hcd 0000:02:07.1: roothub.portstatus [0] 0x00000100 PPS [ 3.558072] ohci_hcd 0000:02:07.1: roothub.portstatus [1] 0x00000100 PPS [ 3.558087] usb usb5: default language 0x0409 [ 3.558096] usb usb5: udev 1, busnum 5, minor = 512 [ 3.558099] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.558156] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.558238] usb usb5: Product: OHCI Host Controller [ 3.558291] usb usb5: Manufacturer: Linux 3.6.8 ohci_hcd [ 3.558344] usb usb5: SerialNumber: 0000:02:07.1 [ 3.558561] usb usb5: usb_probe_device [ 3.558566] usb usb5: configuration #1 chosen from 1 choice [ 3.558576] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 3.558641] hub 5-0:1.0: usb_probe_interface [ 3.558644] hub 5-0:1.0: usb_probe_interface - got id [ 3.558648] hub 5-0:1.0: USB hub found [ 3.558705] hub 5-0:1.0: 2 ports detected [ 3.558758] hub 5-0:1.0: standalone hub [ 3.558761] hub 5-0:1.0: no power switching (usb 1.0) [ 3.558763] hub 5-0:1.0: global over-current protection [ 3.558766] hub 5-0:1.0: power on to power good time: 30ms [ 3.558772] hub 5-0:1.0: local power source is good [ 3.558775] hub 5-0:1.0: no over-current condition exists [ 3.558778] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 3.558845] ehci_hcd 0000:02:07.2: HS companion for 0000:02:07.1 [ 3.558920] uhci_hcd: USB Universal Host Controller Interface driver [ 3.559146] usbcore: registered new interface driver usblp [ 3.559280] usbcore: registered new interface driver libusual [ 3.559465] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 3.569337] i8042: Detected active multiplexing controller, rev 1.1 [ 3.574449] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.574509] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.574602] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.574732] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.574828] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.575207] mousedev: PS/2 mouse device common for all mice [ 3.575469] rtc_cmos 00:03: RTC can wake from S4 [ 3.575682] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.575757] rtc0: alarms up to one day, 242 bytes nvram [ 3.575972] EISA: Probing bus 0 at eisa.0 [ 3.576054] Cannot allocate resource for EISA slot 1 [ 3.576126] Cannot allocate resource for EISA slot 8 [ 3.576179] EISA: Detected 0 cards. [ 3.576233] cpuidle: using governor ladder [ 3.576285] cpuidle: using governor menu [ 3.576369] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS [ 3.576381] hub 4-0:1.0: port 1: status 0301 change 0001 [ 3.577487] usbcore: registered new interface driver usbhid [ 3.577545] usbhid: USB HID core driver [ 3.577762] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.577818] TCP: cubic registered [ 3.577869] Initializing XFRM netlink socket [ 3.578289] NET: Registered protocol family 10 [ 3.578596] sit: IPv6 over IPv4 tunneling driver [ 3.578960] NET: Registered protocol family 17 [ 3.579112] Key type dns_resolver registered [ 3.579532] Using IPI No-Shortcut mode [ 3.579806] PM: Hibernation image not present or could not be loaded. [ 3.580351] Magic number: 8:992:541 [ 3.605811] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.637020] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 3.637028] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 3.658034] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.676020] hub 4-0:1.0: state 7 ports 3 chg 0002 evt 0000 [ 3.676030] hub 4-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 3.738024] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS [ 3.789013] usb 4-1: new low-speed USB device number 2 using ohci_hcd [ 3.853013] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS [ 3.926008] usb 4-1: skipped 1 descriptor after interface [ 3.928999] usb 4-1: default language 0x0409 [ 3.936000] usb 4-1: udev 2, busnum 4, minor = 385 [ 3.936010] usb 4-1: New USB device found, idVendor=045e, idProduct=00d2 [ 3.936066] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.936122] usb 4-1: Product: Microsoft Notebook Optical Mouse with Tilt Wheel [ 3.936204] usb 4-1: Manufacturer: Microsoft [ 3.936415] usb 4-1: usb_probe_device [ 3.936420] usb 4-1: configuration #1 chosen from 1 choice [ 3.939025] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 3.939116] usbhid 4-1:1.0: usb_probe_interface [ 3.939119] usbhid 4-1:1.0: usb_probe_interface - got id [ 3.950269] input: Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:14.4/0000:02:07.0/usb4/4-1/4-1:1.0/input/input1 [ 3.950653] hid-generic 0003:045E:00D2.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel] on usb-0000:02:07.0-1/input0 [ 3.950823] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0002 [ 4.369311] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input2 [ 4.390554] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input3 [ 4.482825] EXT3-fs (hda2): recovery required on readonly filesystem [ 4.482887] EXT3-fs (hda2): write access will be enabled during recovery [ 22.408737] kjournald starting. Commit interval 5 seconds [ 22.408854] EXT3-fs (hda2): orphan cleanup on readonly fs [ 22.408916] ext3_orphan_cleanup: deleting unreferenced inode 559902 [ 22.408988] ext3_orphan_cleanup: deleting unreferenced inode 544255 [ 22.409089] ext3_orphan_cleanup: deleting unreferenced inode 559905 [ 22.409120] ext3_orphan_cleanup: deleting unreferenced inode 544243 [ 22.409169] ext3_orphan_cleanup: deleting unreferenced inode 559901 [ 22.409186] ext3_orphan_cleanup: deleting unreferenced inode 544229 [ 22.409244] ext3_orphan_cleanup: deleting unreferenced inode 3648716 [ 22.409279] ext3_orphan_cleanup: deleting unreferenced inode 3648707 [ 22.409296] ext3_orphan_cleanup: deleting unreferenced inode 3646701 [ 22.409313] ext3_orphan_cleanup: deleting unreferenced inode 559894 [ 22.409329] ext3_orphan_cleanup: deleting unreferenced inode 544231 [ 22.409389] ext3_orphan_cleanup: deleting unreferenced inode 1501249 [ 22.409431] ext3_orphan_cleanup: deleting unreferenced inode 1500968 [ 22.409455] ext3_orphan_cleanup: deleting unreferenced inode 559903 [ 22.409472] ext3_orphan_cleanup: deleting unreferenced inode 4948116 [ 22.409534] ext3_orphan_cleanup: deleting unreferenced inode 559892 [ 22.409550] ext3_orphan_cleanup: deleting unreferenced inode 544244 [ 22.409603] ext3_orphan_cleanup: deleting unreferenced inode 559904 [ 22.409621] ext3_orphan_cleanup: deleting unreferenced inode 544247 [ 22.409669] ext3_orphan_cleanup: deleting unreferenced inode 2310657 [ 22.409702] ext3_orphan_cleanup: deleting unreferenced inode 2310587 [ 22.409720] ext3_orphan_cleanup: deleting unreferenced inode 2310432 [ 22.409736] ext3_orphan_cleanup: deleting unreferenced inode 2310407 [ 22.409753] ext3_orphan_cleanup: deleting unreferenced inode 2310334 [ 22.409770] ext3_orphan_cleanup: deleting unreferenced inode 2310245 [ 22.409787] ext3_orphan_cleanup: deleting unreferenced inode 559890 [ 22.409803] ext3_orphan_cleanup: deleting unreferenced inode 544228 [ 22.409873] ext3_orphan_cleanup: deleting unreferenced inode 559887 [ 22.409890] ext3_orphan_cleanup: deleting unreferenced inode 544227 [ 22.409945] ext3_orphan_cleanup: deleting unreferenced inode 559888 [ 22.409960] ext3_orphan_cleanup: deleting unreferenced inode 544226 [ 22.410025] ext3_orphan_cleanup: deleting unreferenced inode 2310241 [ 22.410042] ext3_orphan_cleanup: deleting unreferenced inode 2310221 [ 22.410061] ext3_orphan_cleanup: deleting unreferenced inode 2310214 [ 22.410077] ext3_orphan_cleanup: deleting unreferenced inode 558369 [ 22.410094] ext3_orphan_cleanup: deleting unreferenced inode 544241 [ 22.430102] EXT3-fs (hda2): 36 orphan inodes deleted [ 23.140603] EXT3-fs (hda2): recovery complete [ 23.140662] EXT3-fs (hda2): mounted filesystem with writeback data mode [ 23.140742] VFS: Mounted root (ext3 filesystem) readonly on device 3:2. [ 23.140857] Freeing unused kernel memory: 460k freed [ 25.749225] udev[654]: starting version 165 [ 26.340859] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x17 [ 26.463903] microcode: CPU1 sig=0xf29, pf=0x4, revision=0x17 [ 26.486649] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 26.583633] thermal LNXTHERM:00: registered as thermal_zone0 [ 26.583723] ACPI: Thermal Zone [THRM] (57 C) [ 26.620793] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 26.621473] ACPI: Lid Switch [LID] [ 26.621623] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 26.621829] ACPI: Power Button [PWRB] [ 26.622054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 26.622223] ACPI: Power Button [PWRF] [ 26.627546] parport_pc 00:09: reported by Plug and Play ACPI [ 26.627708] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [ 26.731967] Linux agpgart interface v0.103 [ 26.753003] agpgart-ati 0000:00:00.0: Ati IGP9100/M chipset [ 26.753318] reserve_ram_pages_type failed [mem 0x36116000-0x36116fff], track 0x10, req 0x10 [ 26.753838] reserve_ram_pages_type failed [mem 0x36896000-0x36896fff], track 0x10, req 0x10 [ 26.754243] reserve_ram_pages_type failed [mem 0x36263000-0x36263fff], track 0x10, req 0x10 [ 26.754627] reserve_ram_pages_type failed [mem 0x36304000-0x36304fff], track 0x10, req 0x10 [ 26.755022] reserve_ram_pages_type failed [mem 0x36305000-0x36305fff], track 0x10, req 0x10 [ 26.755447] reserve_ram_pages_type failed [mem 0x36306000-0x36306fff], track 0x10, req 0x10 [ 26.755844] reserve_ram_pages_type failed [mem 0x36307000-0x36307fff], track 0x10, req 0x10 [ 26.756230] reserve_ram_pages_type failed [mem 0x36308000-0x36308fff], track 0x10, req 0x10 [ 26.756619] reserve_ram_pages_type failed [mem 0x36309000-0x36309fff], track 0x10, req 0x10 [ 26.757526] agpgart-ati 0000:00:00.0: AGP aperture is 32M @ 0xd2000000 [ 26.778936] ACPI Warning: 0x00008040-0x00008047 SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 1 (20120711/utaddress-251) [ 26.779154] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.832547] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 26.835840] ACPI: AC Adapter [ACAD] (on-line) [ 26.849917] tsc: Marking TSC unstable due to TSC halts in idle [ 26.850037] ACPI: acpi_idle registered with cpuidle [ 26.852836] Switching to clocksource acpi_pm [ 26.854373] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 26.854544] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7 [ 26.962852] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00 [ 26.962956] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243) [ 26.962965] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243) [ 26.962974] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243) [ 26.962981] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243) [ 26.962990] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243) [ 26.966824] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 [ 27.182185] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 27.182332] ACPI: Battery Slot [BAT1] (battery present) [ 27.377951] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 27.392171] Broadcom 43xx driver loaded [ Features: PL ] [ 27.554122] [drm] Initialized drm 1.1.0 20060810 [ 27.580812] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 27.586501] Registered led device: b43-phy0::tx [ 27.586551] Registered led device: b43-phy0::rx [ 27.586582] Registered led device: b43-phy0::radio [ 27.676632] [drm] radeon defaulting to kernel modesetting. [ 27.677587] [drm] radeon kernel modesetting enabled. [ 27.678427] [drm] initializing kernel modesetting (RS300 0x1002:0x5835 0x103C:0x006B). [ 27.678577] [drm] register mmio base: 0xD0100000 [ 27.678630] [drm] register mmio size: 65536 [ 27.678857] agpgart-ati 0000:00:00.0: AGP 3.0 bridge [ 27.678927] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode [ 27.679039] radeon 0000:01:05.0: putting AGP V3 device into 8x mode [ 27.679169] radeon 0000:01:05.0: GTT: 32M 0xD2000000 - 0xD3FFFFFF [ 27.679241] radeon 0000:01:05.0: VRAM: 128M 0x0000000048000000 - 0x000000004FFFFFFF (128M used) [ 27.679339] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 27.679393] [drm] Driver supports precise vblank timestamp query. [ 27.679472] [drm] radeon: irq initialized. [ 27.679832] [drm] Detected VRAM RAM=128M, BAR=256M [ 27.679899] [drm] RAM width 64bits DDR [ 27.680288] [TTM] Zone kernel: Available graphics memory: 446832 kiB [ 27.680343] [TTM] Zone highmem: Available graphics memory: 581716 kiB [ 27.680397] [TTM] Initializing pool allocator [ 27.680494] [drm] radeon: 128M of VRAM memory ready [ 27.680548] [drm] radeon: 32M of GTT memory ready. [ 27.681995] radeon 0000:01:05.0: WB disabled [ 27.682095] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000d2000000 and cpu addr 0xf8028000 [ 27.682275] [drm] Loading R200 Microcode [ 27.736395] [drm] radeon: ring at 0x00000000D2001000 [ 27.736510] [drm] ring test succeeded in 0 usecs [ 27.737126] [drm] ib test succeeded in 0 usecs [ 27.737449] [drm] Panel ID String: CMO Color LCD [ 27.737449] [ 27.737563] [drm] Panel Size 1280x800 [ 27.749047] [drm] radeon legacy LVDS backlight initialized [ 27.749193] [drm] Radeon Display Connectors [ 27.749260] [drm] Connector 0: [ 27.749324] [drm] VGA-1 [ 27.749383] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 27.749437] [drm] Encoders: [ 27.749489] [drm] CRT1: INTERNAL_DAC2 [ 27.749541] [drm] Connector 1: [ 27.749592] [drm] LVDS-1 [ 27.749642] [drm] Encoders: [ 27.749693] [drm] LCD1: INTERNAL_LVDS [ 27.749744] [drm] Connector 2: [ 27.749794] [drm] SVIDEO-1 [ 27.749844] [drm] Encoders: [ 27.749895] [drm] TV1: INTERNAL_DAC2 [ 27.809660] [drm] fb mappable at 0xE0040000 [ 27.809719] [drm] vram apper at 0xE0000000 [ 27.809771] [drm] size 4096000 [ 27.809821] [drm] fb depth is 24 [ 27.809872] [drm] pitch is 5120 [ 27.810060] fbcon: radeondrmfb (fb0) is primary device [ 27.866579] Console: switching to colour frame buffer device 160x50 [ 27.891525] fb0: radeondrmfb frame buffer device [ 27.891692] drm: registered panic notifier [ 27.891850] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:05.0 on minor 0 [ 29.282219] Adding 977220k swap on /dev/hda1. Priority:-1 extents:1 across:977220k [ 29.404736] fuse init (API version 7.20) [ 30.095053] EXT3-fs (hda2): using internal journal [ 30.657432] lp0: using parport0 (interrupt-driven).