tsc: Refined TSC clocksource calibration: 2195.013 MHz Switching to clocksource tsc ACPI: Battery Slot [BAT0] (battery present) ATOM BIOS: HP radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF mtrr: no more MTRRs available [drm] Detected VRAM RAM=1024M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 4065034 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. radeon 0000:01:00.0: irq 43 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] probing gen 2 caps for device 8086:101 = 2/0 [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [drm] Loading TURKS Microcode [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). radeon 0000:01:00.0: WB enabled radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880256c90c00 [drm] ring test on 0 succeeded in 3 usecs [drm] ib test on ring 0 succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] eDP-1 [drm] HPD2 [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [drm] Encoders: [drm] LCD1: INTERNAL_UNIPHY1 [drm] Connector 1: [drm] DP-1 [drm] HPD3 [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 2: [drm] DP-2 [drm] HPD4 [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY2 [drm] Connector 3: [drm] HDMI-A-1 [drm] HPD1 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY1 [drm] Internal thermal controller with fan control [drm] radeon: power management initialized [drm] fb mappable at 0xA0142000 [drm] vram apper at 0xA0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 fb1: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.24.0 20080528 for 0000:01:00.0 on minor 0 brd: module loaded loop: module loaded i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP: cubic registered NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:06: setting system clock to 2012-12-30 23:20:21 UTC (1356909621) Freeing unused kernel memory: 620k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ACPI: bus type scsi registered libata version 3.00 loaded. psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x122c00, board id: 1873, fw id: 933174 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 44 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xe impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: DUMMY ata2: SATA max UDMA/133 abar m2048@0xc3807000 port 0xc3807180 irq 44 ata3: SATA max UDMA/133 abar m2048@0xc3807000 port 0xc3807200 irq 44 ata4: SATA max UDMA/133 abar m2048@0xc3807000 port 0xc3807280 irq 44 ata5: DUMMY ata6: DUMMY ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: TOSHIBA MK1059GSMP, GU001C, max UDMA/100 ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/100 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: TOSHIBA MK1059GSMP, GU001C, max UDMA/100 ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK1059GS GU00 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: [sda] 4096-byte physical blocks sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 ata4.00: ATAPI: hp BDDVDRW CA30P, QC01, max UDMA/100 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1059GS GU00 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: [sdb] 4096-byte physical blocks sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata4.00: configured for UDMA/100 scsi 3:0:0:0: CD-ROM hp BDDVDRW CA30P QC01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sdb: sdb1 sdb2 sdb3 sda: sda1 sda2 sda3 sd 2:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 sr 3:0:0:0: Attached scsi generic sg2 type 5 scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 imm: Version 2.05 (for Linux 2.4.0) Fusion MPT base driver 3.04.20 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.20 Fusion MPT FC Host driver 3.04.20 Fusion MPT SAS Host driver 3.04.20 3ware Storage Controller device driver for Linux v1.26.02.003. 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.26) Adaptec aacraid driver 1.2-0[29800]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012 qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k. Emulex LightPulse Fibre Channel SCSI driver 8.3.32 Copyright(c) 2004-2009 Emulex. All rights reserved. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded ACPI: bus type usb registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3809000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.6.11-gentoo ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc3808000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.6.11-gentoo ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd: USB Universal Host Controller Interface driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver xhci_hcd 0000:11:00.0: xHCI Host Controller xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:11:00.0: irq 18, io mem 0xc1500000 xhci_hcd 0000:11:00.0: irq 45 for MSI/MSI-X xhci_hcd 0000:11:00.0: irq 46 for MSI/MSI-X xhci_hcd 0000:11:00.0: irq 47 for MSI/MSI-X xhci_hcd 0000:11:00.0: irq 48 for MSI/MSI-X xhci_hcd 0000:11:00.0: irq 49 for MSI/MSI-X xhci_hcd 0000:11:00.0: irq 50 for MSI/MSI-X xhci_hcd 0000:11:00.0: irq 51 for MSI/MSI-X xhci_hcd 0000:11:00.0: irq 52 for MSI/MSI-X usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: xHCI Host Controller usb usb3: Manufacturer: Linux 3.6.11-gentoo xhci_hcd usb usb3: SerialNumber: 0000:11:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:11:00.0: xHCI Host Controller xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 4 usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: xHCI Host Controller usb usb4: Manufacturer: Linux 3.6.11-gentoo xhci_hcd usb usb4: SerialNumber: 0000:11:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xhci_hcd 0000:12:00.0: xHCI Host Controller xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 5 xhci_hcd 0000:12:00.0: irq 19, io mem 0xc1400000 xhci_hcd 0000:12:00.0: irq 53 for MSI/MSI-X xhci_hcd 0000:12:00.0: irq 54 for MSI/MSI-X xhci_hcd 0000:12:00.0: irq 55 for MSI/MSI-X xhci_hcd 0000:12:00.0: irq 56 for MSI/MSI-X xhci_hcd 0000:12:00.0: irq 57 for MSI/MSI-X xhci_hcd 0000:12:00.0: irq 58 for MSI/MSI-X xhci_hcd 0000:12:00.0: irq 59 for MSI/MSI-X xhci_hcd 0000:12:00.0: irq 60 for MSI/MSI-X usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: xHCI Host Controller usb usb5: Manufacturer: Linux 3.6.11-gentoo xhci_hcd usb usb5: SerialNumber: 0000:12:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected xhci_hcd 0000:12:00.0: xHCI Host Controller xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 6 usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: xHCI Host Controller usb usb6: Manufacturer: Linux 3.6.11-gentoo xhci_hcd usb usb6: SerialNumber: 0000:12:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 1-1: new high-speed USB device number 2 using ehci_hcd usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 1-1: New USB device found, idVendor=8087, idProduct=0024 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high-speed USB device number 2 using ehci_hcd usb 2-1: New USB device found, idVendor=8087, idProduct=0024 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 6 ports detected usb 1-1.3: new full-speed USB device number 3 using ehci_hcd usb 1-1.3: New USB device found, idVendor=0a5c, idProduct=21e1 usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.3: Product: BCM20702A0 usb 1-1.3: Manufacturer: Broadcom Corp usb 1-1.3: SerialNumber: 60D819F033AF device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com usb 2-1.2: new full-speed USB device number 3 using ehci_hcd usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.2: Product: USB Receiver usb 2-1.2: Manufacturer: Logitech input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5 hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input6 hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 usb 2-1.5: new high-speed USB device number 4 using ehci_hcd usb 2-1.5: New USB device found, idVendor=0424, idProduct=b832 usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.5: Product: HP Wireless Audio Adapter usb 2-1.5: Manufacturer: Standard Microsystems Corp. input: Standard Microsystems Corp. HP Wireless Audio Adapter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.3/input/input7 hid-generic 0003:0424:B832.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Standard Microsystems Corp. HP Wireless Audio Adapter] on usb-0000:00:1d.0-1.5/input3 usb 2-1.6: new high-speed USB device number 5 using ehci_hcd md: raid0 personality registered for level 0 usb 2-1.6: New USB device found, idVendor=064e, idProduct=e258 usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.6: Product: HP TrueVision HD usb 2-1.6: Manufacturer: SuYin usb 2-1.6: SerialNumber: HF1016-A821-OV01-VH-R01.01.00 md: raid1 personality registered for level 1 raid6: sse2x1 5926 MB/s raid6: sse2x2 7273 MB/s raid6: sse2x4 8428 MB/s raid6: using algorithm sse2x4 (8428 MB/s) raid6: using ssse3x2 recovery algorithm async_tx: api initialized (async) xor: automatically using best checksumming function: avx : 13644.000 MB/sec md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 md: linear personality registered for level -1 md: multipath personality registered for level -4 JFS: nTxBlock = 8192, nTxLock = 65536 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. fuse init (API version 7.20) e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. Loading iSCSI transport class v2.0-870. md: md127 stopped. md: bind md: bind bio: create slab at 1 md/raid0:md127: md_size is 3889739776 sectors. md: RAID0 configuration for md127 - 1 zone ACPI: Invalid Power Resource to register! md: zone0=[sda3/sdb3] zone-offset= 0KB, device-offset= 0KB, size=1944869888KB md127: detected capacity change from 0 to 1991546765312 md127: unknown partition table md: md126 stopped. md: bind md: bind md/raid1:md126: active with 2 out of 2 mirrors md126: detected capacity change from 0 to 134152192 md126: unknown partition table md: Autodetecting RAID arrays. md: could not open unknown-block(8,17). md: could not open unknown-block(8,19). md: could not open unknown-block(8,1). md: could not open unknown-block(8,3). md: Scanned 4 and added 0 devices. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs (dm-0): mounted filesystem with ordered data mode udevd[17408]: starting version 171 ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a input: PC Speaker as /devices/platform/pcspkr/input/input8 atl1c 0000:10:00.0: version 1.0.1.0-NAPI cfg80211: Calling CRDA to update world regulatory domain microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a microcode: Microcode Update Driver: v2.00 , Peter Oruba Intel(R) Wireless WiFi driver for Linux, in-tree: Copyright(c) 2003-2012 Intel Corporation iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:09:00.0: pci_resource_base = ffffc900100b8000 iwlwifi 0000:09:00.0: HW Revision ID = 0x3E iwlwifi 0000:09:00.0: irq 61 for MSI/MSI-X iwlwifi 0000:09:00.0: loaded firmware version 9.221.4.1 build 25532 kvm: disabled by bios iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: iwldvm: Copyright(c) 2003-2012 Intel Corporation iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG disabled iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P enabled iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X iwlwifi 0000:09:00.0: device EEPROM VER=0x43a, CALIB=0x6 iwlwifi 0000:09:00.0: Device SKU: 0x1F0 iwlwifi 0000:09:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client snd_hda_intel 0000:01:00.1: irq 63 for MSI/MSI-X EXT3-fs (dm-0): using internal journal Adding 4194300k swap on /dev/mapper/swapa. Priority:-1 extents:1 across:4194300k Adding 4194300k swap on /dev/mapper/swapb. Priority:-2 extents:1 across:4194300k atl1c 0000:10:00.0: irq 64 for MSI/MSI-X iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:09:00.0: Radio type=0x0-0x3-0x1 iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:09:00.0: Radio type=0x0-0x3-0x1 NET: Registered protocol family 10 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with c0:c1:c0:3e:f9:f5 wlan0: direct probe to c0:c1:c0:3e:f9:f5 (try 1/3) vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none wlan0: send auth to c0:c1:c0:3e:f9:f5 (try 2/3) wlan0: authenticated wlan0: associate with c0:c1:c0:3e:f9:f5 (try 1/3) wlan0: RX AssocResp from c0:c1:c0:3e:f9:f5 (capab=0x411 status=0 aid=5) wlan0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready iwlwifi 0000:09:00.0: fail to flush all tx fifo queues cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with c0:c1:c0:3e:f9:f5 wlan0: send auth to c0:c1:c0:3e:f9:f5 (try 1/3) wlan0: authenticated wlan0: associate with c0:c1:c0:3e:f9:f5 (try 1/3) wlan0: RX AssocResp from c0:c1:c0:3e:f9:f5 (capab=0x411 status=0 aid=5) wlan0: associated