t 8 (was 0, writing ebf0ea00) PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20008070) PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth2: Coming out of suspend... ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 66 pnp: Device 00:08 does not support activation. pnp: Device 00:09 does not support activation. ATA: abnormal status 0x7F on port 0x177 usbdev5.7_ep81: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.7_ep02: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.7_ep83: PM: resume from 0, parent 5-2:1.0 still 1 Restarting tasks...<6>usb 5-2: USB disconnect, address 7 done Thawing cpus ... SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.47 BogoMIPS (lpj=1828738) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 CPU1 is up usb 5-2: new full speed USB device using uhci_hcd and address 8 usb 5-2: configuration #1 chosen from 1 choice ata1.00: configured for UDMA/100 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [=========================== SUSPEND HAPPENS HERE ===========================] Freezing cpus ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Stopping tasks: ===============================================| usbdev5.8_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.8_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.8_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1 eth2: Going into suspend... ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI interrupt for device 0000:02:00.0 disabled ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled Back to C! PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100) PCI: Enabling device 0000:00:1b.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 8070) PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth2: Coming out of suspend... ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 66 pnp: Device 00:08 does not support activation. pnp: Device 00:09 does not support activation. ATA: abnormal status 0x7F on port 0x177 usbdev5.8_ep81: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.8_ep02: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.8_ep83: PM: resume from 0, parent 5-2:1.0 still 1 Restarting tasks...<6>usb 5-2: USB disconnect, address 8 done Thawing cpus ... SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.52 BogoMIPS (lpj=1828763) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 CPU1 is up usb 5-2: new full speed USB device using uhci_hcd and address 9 usb 5-2: configuration #1 chosen from 1 choice ata1.00: configured for UDMA/100 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) IRQ handler type mismatch for IRQ 82 [] setup_irq+0xbb/0x1c0 [] e1000_intr+0x0/0x3c0 [] request_irq+0xb3/0xd0 [] e1000_intr+0x0/0x3c0 [] e1000_open+0x9b/0x220 [] e1000_intr+0x0/0x3c0 [] dev_open+0x3a/0x80 [] dev_mc_upload+0x32/0x50 [] _spin_unlock_bh+0x12/0x20 [] dev_change_flags+0x5c/0x140 [] devinet_ioctl+0x4fb/0x6f0 [] sock_ioctl+0x12c/0x240 [] do_ioctl+0x35/0x90 [] vfs_ioctl+0x5a/0x2d0 [] do_page_fault+0x15f/0x5fc [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb e1000: eth0: e1000_request_irq: Unable to allocate interrupt Error: -16 Freezing cpus ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Stopping tasks: ===============================================| usbdev5.9_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.9_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.9_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1 eth2: Going into suspend... ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI interrupt for device 0000:02:00.0 disabled ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled Back to C! PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100) PCI: Enabling device 0000:00:1b.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20008070) PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth2: Coming out of suspend... ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 66 pnp: Device 00:08 does not support activation. pnp: Device 00:09 does not support activation. ATA: abnormal status 0x7F on port 0x177 usbdev5.9_ep81: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.9_ep02: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.9_ep83: PM: resume from 0, parent 5-2:1.0 still 1 Restarting tasks...<6>usb 5-2: USB disconnect, address 9 done Thawing cpus ... SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.53 BogoMIPS (lpj=1828768) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 CPU1 is up usb 5-2: new full speed USB device using uhci_hcd and address 10 usb 5-2: configuration #1 chosen from 1 choice ata1.00: configured for UDMA/100 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) Freezing cpus ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Stopping tasks: ===============================================| usbdev5.10_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.10_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.10_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1 eth2: Going into suspend... ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI interrupt for device 0000:02:00.0 disabled ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled Back to C! PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100) PCI: Enabling device 0000:00:1b.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 8070) PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth2: Coming out of suspend... ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 66 pnp: Device 00:08 does not support activation. pnp: Device 00:09 does not support activation. ATA: abnormal status 0x7F on port 0x177 usbdev5.10_ep81: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.10_ep02: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.10_ep83: PM: resume from 0, parent 5-2:1.0 still 1 Restarting tasks...<6>usb 5-2: USB disconnect, address 10 done Thawing cpus ... SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.53 BogoMIPS (lpj=1828767) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 CPU1 is up usb 5-2: new full speed USB device using uhci_hcd and address 11 usb 5-2: configuration #1 chosen from 1 choice ata1.00: configured for UDMA/100 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) IRQ handler type mismatch for IRQ 82 [] setup_irq+0xbb/0x1c0 [] e1000_intr+0x0/0x3c0 [] request_irq+0xb3/0xd0 [] e1000_intr+0x0/0x3c0 [] e1000_open+0x9b/0x220 [] e1000_intr+0x0/0x3c0 [] dev_open+0x3a/0x80 [] dev_mc_upload+0x32/0x50 [] _spin_unlock_bh+0x12/0x20 [] dev_change_flags+0x5c/0x140 [] devinet_ioctl+0x4fb/0x6f0 [] sock_ioctl+0x12c/0x240 [] do_ioctl+0x35/0x90 [] vfs_ioctl+0x5a/0x2d0 [] do_page_fault+0x15f/0x5fc [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb e1000: eth0: e1000_request_irq: Unable to allocate interrupt Error: -16 IRQ handler type mismatch for IRQ 90 [] setup_irq+0xbb/0x1c0 [] e1000_intr+0x0/0x3c0 [] request_irq+0xb3/0xd0 [] e1000_intr+0x0/0x3c0 [] e1000_open+0x9b/0x220 [] e1000_intr+0x0/0x3c0 [] dev_open+0x3a/0x80 [] dev_mc_upload+0x32/0x50 [] _spin_unlock_bh+0x12/0x20 [] dev_change_flags+0x5c/0x140 [] devinet_ioctl+0x4fb/0x6f0 [] sock_ioctl+0x12c/0x240 [] do_ioctl+0x35/0x90 [] vfs_ioctl+0x5a/0x2d0 [] do_page_fault+0x15f/0x5fc [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb e1000: eth0: e1000_request_irq: Unable to allocate interrupt Error: -16 e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex Freezing cpus ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Stopping tasks: ================================================| usbdev5.11_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.11_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.11_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1 ipw3945: Error sending cmd #07 to daemon: time out after 500ms. eth2: Going into suspend... ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI interrupt for device 0000:02:00.0 disabled ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled Back to C! PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100) PCI: Enabling device 0000:00:1b.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20008070) PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth2: Coming out of suspend... ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 66 pnp: Device 00:08 does not support activation. pnp: Device 00:09 does not support activation. ATA: abnormal status 0x7F on port 0x177 usbdev5.11_ep81: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.11_ep02: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.11_ep83: PM: resume from 0, parent 5-2:1.0 still 1 Restarting tasks...<6>usb 5-2: USB disconnect, address 11 done Thawing cpus ... SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.52 BogoMIPS (lpj=1828761) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 CPU1 is up usb 5-2: new full speed USB device using uhci_hcd and address 12 usb 5-2: configuration #1 chosen from 1 choice ata1.00: configured for UDMA/100 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) Freezing cpus ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Stopping tasks: ====================================================| usbdev5.12_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.12_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1 usbdev5.12_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1 eth2: Going into suspend... ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI interrupt for device 0000:02:00.0 disabled ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled Back to C! PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100) PCI: Enabling device 0000:00:1b.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:525: hda_intel: azx_get_response timeout, switching to single_cmd mode... PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 8070) PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth2: Coming out of suspend... ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 66 pnp: Device 00:08 does not support activation. pnp: Device 00:09 does not support activation. ATA: abnormal status 0x7F on port 0x177 usbdev5.12_ep81: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.12_ep02: PM: resume from 0, parent 5-2:1.0 still 1 usbdev5.12_ep83: PM: resume from 0, parent 5-2:1.0 still 1 Restarting tasks...<6>usb 5-2: USB disconnect, address 12 done Thawing cpus ... SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.55 BogoMIPS (lpj=1828777) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 CPU1 is up usb 5-2: new full speed USB device using uhci_hcd and address 13 usb 5-2: configuration #1 chosen from 1 choice ata1.00: configured for UDMA/100 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)