ACPI: ACPI Dock Station Driver: 2 docks/bays found PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d) pci_root PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-fe] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 pci 0000:00:16.0: reg 10: [mem 0xf1625000-0xf162500f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 pci 0000:00:19.0: reg 10: [mem 0xf1600000-0xf161ffff] pci 0000:00:19.0: reg 14: [mem 0xf162b000-0xf162bfff] pci 0000:00:19.0: reg 18: [io 0x4080-0x409f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 pci 0000:00:1a.0: reg 10: [mem 0xf162a000-0xf162a3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 pci 0000:00:1b.0: reg 10: [mem 0xf1620000-0xf1623fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 pci 0000:00:1d.0: reg 10: [mem 0xf1629000-0xf16293ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 pci 0000:00:1f.2: reg 10: [io 0x40a8-0x40af] pci 0000:00:1f.2: reg 14: [io 0x40b4-0x40b7] pci 0000:00:1f.2: reg 18: [io 0x40a0-0x40a7] pci 0000:00:1f.2: reg 1c: [io 0x40b0-0x40b3] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] pci 0000:00:1f.2: reg 24: [mem 0xf1628000-0xf16287ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 10: [mem 0xf1624000-0xf16240ff 64bit] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 pci 0000:03:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff] pci 0000:05:00.0: [1180:e823] type 00 class 0x088000 pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz. pci 0000:05:00.0: reg 10: [mem 0xf0d00000-0xf0d000ff] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] pci 0000:0d:00.0: [1033:0194] type 00 class 0x0c0330 pci 0000:0d:00.0: reg 10: [mem 0xf0c00000-0xf0c01fff 64bit] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PCI bridge to [bus 0d] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf0cfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] e820: reserve RAM buffer [mem 0xda89f000-0xdbffffff] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved system 00:00: [mem 0x000cc000-0x000cffff] has been reserved system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved system 00:00: [mem 0x000dc000-0x000dffff] has been reserved system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved system 00:00: [mem 0x000ec000-0x000effff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:01: [io 0x0400-0x047f] has been reserved system 00:01: [io 0x0500-0x057f] has been reserved system 00:01: [io 0x0800-0x080f] has been reserved system 00:01: [io 0x15e0-0x15ef] has been reserved system 00:01: [io 0x1600-0x167f] has been reserved system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved system 00:01: [mem 0x00000000-0x00000fff] could not be reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 0d] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf0cfffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] pci_bus 0000:03: resource 1 [mem 0xf1500000-0xf15fffff] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] pci_bus 0000:05: resource 1 [mem 0xf0d00000-0xf14fffff] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] pci_bus 0000:0d: resource 1 [mem 0xf0c00000-0xf0cfffff] NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 7, 524288 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2096k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xd689d000-0xda89d000] (64MB) mapped at [ffff8800d689d000-ffff8800da89cfff] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) audit: initializing netlink socket (disabled) type=2000 audit(1359382240.032:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled msgmni has been set to 7666 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) intel_idle: MWAIT substates: 0x21120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Requesting acpi_cpufreq thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (25 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] Memory usable by graphics device = 2048M i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 40 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 200x56 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device i915 0000:00:02.0: registered panic notifier acpi device:00: registered as cooling_device4 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 brd: module loaded loop: module loaded i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com EDAC MC: Ver: 3.0.0 cpuidle: using governor ladder cpuidle: using governor menu input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 TCP: cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered registered taskstats version 1 rtc_cmos 00:06: setting system clock to 2013-01-28 14:10:41 UTC (1359382241) Freeing unused kernel memory: 544k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 1404k freed Freeing unused kernel memory: 280k freed tsc: Refined TSC clocksource calibration: 2491.905 MHz Switching to clocksource tsc ACPI: bus type scsi registered libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 41 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628100 irq 41 ata2: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628180 irq 41 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628300 irq 41 ata6: DUMMY [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ATA-8: INTEL SSDSA2CW160G3, 4PC10362, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: failed to get Identify Device Data, Emask 0x1 ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: failed to get Identify Device Data, Emask 0x1 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW16 4PC1 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: bus type usb registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd: USB Universal Host Controller Interface driver xhci_hcd 0000:0d:00.0: xHCI Host Controller xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:0d:00.0: irq 16, io mem 0xf0c00000 xhci_hcd 0000:0d:00.0: irq 42 for MSI/MSI-X xhci_hcd 0000:0d:00.0: irq 43 for MSI/MSI-X xhci_hcd 0000:0d:00.0: irq 44 for MSI/MSI-X xhci_hcd 0000:0d:00.0: irq 45 for MSI/MSI-X xhci_hcd 0000:0d:00.0: irq 46 for MSI/MSI-X usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 3.8.0-rc3 xhci_hcd usb usb1: SerialNumber: 0000:0d:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci_hcd 0000:0d:00.0: xHCI Host Controller xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 3.8.0-rc3 xhci_hcd usb usb2: SerialNumber: 0000:0d:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver usbhid usbhid: USB HID core driver RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. fuse init (API version 7.20) psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 bio: create slab at 1 bio: create slab at 1 FAT-fs (dm-0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! XFS (dm-0): Mounting Filesystem XFS (dm-0): Starting recovery (logdev: internal) XFS (dm-0): Ending recovery (logdev: internal) udevd[4379]: starting version 171 ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1a.0: setting latency timer to 64 ehci-pci 0000:00:1a.0: EHCI Host Controller ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 ehci-pci 0000:00:1a.0: debug port 2 ehci-pci 0000:00:1a.0: cache line size of 64 is not supported ehci-pci 0000:00:1a.0: irq 16, io mem 0xf162a000 e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 3.8.0-rc3 ehci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ehci-pci 0000:00:1d.0: setting latency timer to 64 ehci-pci 0000:00:1d.0: EHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 cfg80211: Calling CRDA to update world regulatory domain sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:05:00.0: SDHCI controller found [1180:e823] (rev 4) ehci-pci 0000:00:1d.0: debug port 2 ehci-pci 0000:00:1d.0: cache line size of 64 is not supported ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1629000 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 3.8.0-rc3 ehci_hcd usb usb4: SerialNumber: 0000:00:1d.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:00:19.0: irq 47 for MSI/MSI-X Intel(R) Wireless WiFi driver for Linux, in-tree: Copyright(c) 2003-2012 Intel Corporation iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [AC] (off-line) tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78) Non-volatile memory driver v1.3 mmc0: SDHCI controller on PCI [0000:05:00.0] using DMA thinkpad_acpi: ThinkPad ACPI Extras v0.24 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 8CET48WW (1.28 ), EC unknown thinkpad_acpi: Lenovo ThinkPad T420s, model 41716SG thinkpad_acpi: detected a 8-level brightness capable ThinkPad thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... input: PC Speaker as /devices/platform/pcspkr/input/input7 microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT0] (battery present) tpm_tis 00:09: TPM is disabled/deactivated (0x6) ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT1] (battery present) thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked thinkpad_acpi: Standard ACPI backlight interface available, not loading native one thinkpad_acpi: Console audio control enabled, mode: monitor (read only) input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301 microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a microcode: Microcode Update Driver: v2.00 , Peter Oruba iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio. cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:6e:99:1a e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 usb 3-1: new high-speed USB device number 2 using ehci-pci usb 3-1: New USB device found, idVendor=8087, idProduct=0024 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 3-1:1.0: USB hub found hub 3-1:1.0: 6 ports detected usb 4-1: new high-speed USB device number 2 using ehci-pci usb 4-1: New USB device found, idVendor=8087, idProduct=0024 usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 4-1:1.0: USB hub found hub 4-1:1.0: 8 ports detected usb 3-1.3: new full-speed USB device number 3 using ehci-pci usb 3-1.3: New USB device found, idVendor=147e, idProduct=2016 usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.3: Product: Biometric Coprocessor usb 3-1.3: Manufacturer: UPEK usb 3-1.4: new full-speed USB device number 4 using ehci-pci usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1.4: Product: Broadcom Bluetooth Device usb 3-1.4: Manufacturer: Broadcom Corp usb 3-1.4: SerialNumber: EC55F9FB23C2 Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb usb 3-1.6: new high-speed USB device number 5 using ehci-pci usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b221 usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.6: Product: Integrated Camera usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd. e1000e 0000:00:19.0: irq 47 for MSI/MSI-X e1000e 0000:00:19.0: irq 47 for MSI/MSI-X IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with e8:ba:70:92:63:80 wlan0: send auth to e8:ba:70:92:63:80 (try 1/3) wlan0: authenticated wlan0: associate with e8:ba:70:92:63:80 (try 1/3) wlan0: RX AssocResp from e8:ba:70:92:63:80 (capab=0x431 status=0 aid=14) wlan0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) thinkpad_acpi: docked into hotplug port replicator usb 3-1.5: new high-speed USB device number 6 using ehci-pci usb 3-1.5: New USB device found, idVendor=17ef, idProduct=100a usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 3-1.5:1.0: USB hub found hub 3-1.5:1.0: 6 ports detected usb 3-1.5.1: new low-speed USB device number 7 using ehci-pci usb 3-1.5.1: New USB device found, idVendor=046d, idProduct=c069 usb 3-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.5.1: Product: USB Laser Mouse usb 3-1.5.1: Manufacturer: Logitech input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.0/input/input13 hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1.5.1/input0 usb 3-1.5.2: new low-speed USB device number 8 using ehci-pci usb 3-1.5.2: New USB device found, idVendor=04f2, idProduct=0833 usb 3-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.5.2: Product: USB Keyboard usb 3-1.5.2: Manufacturer: CHICONY input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.0/input/input14 hid-generic 0003:04F2:0833.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1a.0-1.5.2/input0 input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/input/input15 hid-generic 0003:04F2:0833.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:1a.0-1.5.2/input1 ata1.00: failed to get Identify Device Data, Emask 0x1 ata1.00: failed to get Identify Device Data, Emask 0x1 ata1.00: configured for UDMA/133 ata1: EH complete sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA usb 3-1.5.4: new high-speed USB device number 9 using ehci-pci usb 3-1.5.4: New USB device found, idVendor=0424, idProduct=2514 usb 3-1.5.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 3-1.5.4:1.0: USB hub found hub 3-1.5.4:1.0: 3 ports detected usb 3-1.5.4.1: new high-speed USB device number 10 using ehci-pci usb 3-1.5.4.1: New USB device found, idVendor=0424, idProduct=2640 usb 3-1.5.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 3-1.5.4.1:1.0: USB hub found hub 3-1.5.4.1:1.0: 3 ports detected thinkpad_acpi: unknown possible thermal alarm or keyboard event received thinkpad_acpi: unhandled HKEY event 0x6040 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net usb 3-1.5.4.1.1: new high-speed USB device number 11 using ehci-pci usb 3-1.5.4.1.1: New USB device found, idVendor=0424, idProduct=4063 usb 3-1.5.4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1.5.4.1.1: Product: Ultra Fast Media Reader usb 3-1.5.4.1.1: Manufacturer: Generic usb 3-1.5.4.1.1: SerialNumber: 000000264001 scsi6 : usb-storage 3-1.5.4.1.1:1.0 scsi 6:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg1 type 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready usb 3-1.5.3: new high-speed USB device number 12 using ehci-pci usb 3-1.5.3: New USB device found, idVendor=0421, idProduct=03d1 usb 3-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1.5.3: Product: Nokia N950 usb 3-1.5.3: Manufacturer: Nokia usb 3-1.5.3: SerialNumber: 357881040001804 scsi7 : usb-storage 3-1.5.3:1.0 scsi 7:0:0:0: Direct-Access Nokia Nokia N950 0316 PQ: 0 ANSI: 2 sd 7:0:0:0: Attached scsi generic sg2 type 0 sd 7:0:0:0: [sdc] Attached SCSI removable disk usb 3-1.5.3: USB disconnect, device number 12 usb 3-1.5.3: new high-speed USB device number 13 using ehci-pci usb 3-1.5.3: New USB device found, idVendor=0421, idProduct=05d8 usb 3-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1.5.3: Product: Nokia N950 RNDIS/Ethernet usb 3-1.5.3: Manufacturer: Nokia usb 3-1.5.3: SerialNumber: 357881040001804 cdc_ether 3-1.5.3:1.0 usb0: register 'cdc_ether' at usb-0000:00:1a.0-1.5.3, CDC Ethernet Device, be:55:0d:b9:a2:3f usbcore: registered new interface driver cdc_ether IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) wlan0: authenticate with e8:ba:70:92:63:8f wlan0: send auth to e8:ba:70:92:63:8f (try 1/3) wlan0: send auth to e8:ba:70:92:63:8f (try 2/3) wlan0: authenticated wlan0: associate with e8:ba:70:92:63:8f (try 1/3) wlan0: RX AssocResp from e8:ba:70:92:63:8f (capab=0x111 status=0 aid=1) wlan0: associated cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) hda-intel 0000:00:1b.0: Unstable LPIB (65488 >= 8192); disabling LPIB delay counting wlan0: deauthenticated from e8:ba:70:92:63:8f (Reason: 15) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) wlan0: authenticate with e8:ba:70:92:60:40 wlan0: send auth to e8:ba:70:92:60:40 (try 1/3) wlan0: authenticated wlan0: waiting for beacon from e8:ba:70:92:60:40 wlan0: associate with e8:ba:70:92:60:40 (try 1/3) wlan0: RX AssocResp from e8:ba:70:92:60:40 (capab=0x431 status=0 aid=16) wlan0: associated cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [drm:kick_ring] *ERROR* Kicking stuck wait on render ring cp: page allocation failure: order:9, mode:0x1040d0 Pid: 22036, comm: cp Not tainted 3.8.0-rc3 #1 Call Trace: [] warn_alloc_failed+0x108/0x11d [] ? drain_local_pages+0x11/0x13 [] __alloc_pages_nodemask+0x769/0x7fc [] __get_free_pages+0x12/0x41 [] kmalloc_order_trace+0x2e/0x83 [] __kmalloc+0x36/0x12e [] ? __free_memcg_kmem_pages+0x9/0xb [] seq_read+0x1e9/0x353 [] vfs_read+0xad/0x129 [] sys_read+0x4f/0x79 [] system_call_fastpath+0x16/0x1b Mem-Info: DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 CPU 1: hi: 0, btch: 1 usd: 0 CPU 2: hi: 0, btch: 1 usd: 0 CPU 3: hi: 0, btch: 1 usd: 0 DMA32 per-cpu: CPU 0: hi: 186, btch: 31 usd: 0 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 0 CPU 3: hi: 186, btch: 31 usd: 0 Normal per-cpu: CPU 0: hi: 186, btch: 31 usd: 0 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 0 CPU 3: hi: 186, btch: 31 usd: 0 active_anon:552924 inactive_anon:67302 isolated_anon:0 active_file:58757 inactive_file:123989 isolated_file:0 unevictable:1 dirty:387 writeback:0 unstable:0 free:129169 slab_reclaimable:11537 slab_unreclaimable:8605 mapped:108589 shmem:125321 pagetables:8688 bounce:0 free_cma:0 DMA free:15900kB min:524kB low:652kB high:784kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB managed:15900kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 3422 3900 3900 DMA32 free:478140kB min:118124kB low:147652kB high:177184kB active_anon:1909096kB inactive_anon:240536kB active_file:234424kB inactive_file:495032kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3504436kB managed:3482280kB mlocked:0kB dirty:1456kB writeback:0kB mapped:402060kB shmem:416912kB slab_reclaimable:26848kB slab_unreclaimable:17508kB kernel_stack:1184kB pagetables:23240kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 478 478 Normal free:22636kB min:16512kB low:20640kB high:24768kB active_anon:302600kB inactive_anon:28672kB active_file:604kB inactive_file:924kB unevictable:4kB isolated(anon):0kB isolated(file):0kB present:489888kB managed:424996kB mlocked:4kB dirty:92kB writeback:0kB mapped:32296kB shmem:84372kB slab_reclaimable:19300kB slab_unreclaimable:16912kB kernel_stack:1808kB pagetables:11512kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 DMA: 1*4kB (U) 1*8kB (U) 1*16kB (U) 0*32kB 2*64kB (U) 1*128kB (U) 1*256kB (U) 0*512kB 1*1024kB (U) 1*2048kB (U) 3*4096kB (MR) = 15900kB DMA32: 4549*4kB (UEM) 4145*8kB (UEM) 4811*16kB (UEM) 3143*32kB (UEM) 1581*64kB (UEM) 587*128kB (UEM) 212*256kB (UEM) 29*512kB (UEM) 4*1024kB (UM) 0*2048kB 0*4096kB = 478444kB Normal: 953*4kB (UEM) 848*8kB (UEM) 423*16kB (UEM) 75*32kB (UEM) 0*64kB 6*128kB (E) 2*256kB (E) 0*512kB 0*1024kB 1*2048kB (R) 0*4096kB = 23092kB 308067 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 1041904 pages RAM 60024 pages reserved 1344329 pages shared 667265 pages non-shared cp: page allocation failure: order:9, mode:0x1040d0 Pid: 22037, comm: cp Not tainted 3.8.0-rc3 #1 Call Trace: [] warn_alloc_failed+0x108/0x11d [] ? drain_local_pages+0x11/0x13 [] __alloc_pages_nodemask+0x769/0x7fc [] __get_free_pages+0x12/0x41 [] kmalloc_order_trace+0x2e/0x83 [] __kmalloc+0x36/0x12e [] ? __free_memcg_kmem_pages+0x9/0xb [] seq_read+0x1e9/0x353 [] vfs_read+0xad/0x129 [] sys_read+0x4f/0x79 [] system_call_fastpath+0x16/0x1b Mem-Info: DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 CPU 1: hi: 0, btch: 1 usd: 0 CPU 2: hi: 0, btch: 1 usd: 0 CPU 3: hi: 0, btch: 1 usd: 0 DMA32 per-cpu: CPU 0: hi: 186, btch: 31 usd: 0 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 0 CPU 3: hi: 186, btch: 31 usd: 0 Normal per-cpu: CPU 0: hi: 186, btch: 31 usd: 0 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 0 CPU 3: hi: 186, btch: 31 usd: 0 active_anon:560184 inactive_anon:60102 isolated_anon:0 active_file:58765 inactive_file:123808 isolated_file:0 unevictable:1 dirty:389 writeback:0 unstable:0 free:130066 slab_reclaimable:11537 slab_unreclaimable:8518 mapped:108590 shmem:125321 pagetables:8687 bounce:0 free_cma:0 DMA free:15900kB min:524kB low:652kB high:784kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB managed:15900kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 3422 3900 3900 DMA32 free:480688kB min:118124kB low:147652kB high:177184kB active_anon:1933040kB inactive_anon:216468kB active_file:234432kB inactive_file:495152kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3504436kB managed:3482280kB mlocked:0kB dirty:1464kB writeback:0kB mapped:402064kB shmem:416792kB slab_reclaimable:26848kB slab_unreclaimable:17160kB kernel_stack:1184kB pagetables:23236kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 478 478 Normal free:23676kB min:16512kB low:20640kB high:24768kB active_anon:307696kB inactive_anon:23940kB active_file:628kB inactive_file:80kB unevictable:4kB isolated(anon):0kB isolated(file):0kB present:489888kB managed:424996kB mlocked:4kB dirty:92kB writeback:0kB mapped:32296kB shmem:84492kB slab_reclaimable:19300kB slab_unreclaimable:16912kB kernel_stack:1808kB pagetables:11512kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 DMA: 1*4kB (U) 1*8kB (U) 1*16kB (U) 0*32kB 2*64kB (U) 1*128kB (U) 1*256kB (U) 0*512kB 1*1024kB (U) 1*2048kB (U) 3*4096kB (MR) = 15900kB DMA32: 4897*4kB (UEM) 4247*8kB (UEM) 4823*16kB (UEM) 3147*32kB (UEM) 1581*64kB (UEM) 587*128kB (UEM) 212*256kB (UEM) 29*512kB (UEM) 4*1024kB (UM) 0*2048kB 0*4096kB = 480972kB Normal: 1174*4kB (UEM) 879*8kB (UEM) 431*16kB (UEM) 76*32kB (UM) 0*64kB 6*128kB (UE) 2*256kB (E) 0*512kB 0*1024kB 1*2048kB (R) 0*4096kB = 24384kB 307706 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 1041904 pages RAM 60024 pages reserved 1324062 pages shared 683152 pages non-shared cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) wlan0: authenticate with 64:d9:89:c4:58:e0 wlan0: send auth to 64:d9:89:c4:58:e0 (try 1/3) wlan0: authenticated wlan0: waiting for beacon from 64:d9:89:c4:58:e0 wlan0: associate with 64:d9:89:c4:58:e0 (try 1/3) wlan0: RX AssocResp from 64:d9:89:c4:58:e0 (capab=0x431 status=0 aid=7) wlan0: associated cfg80211: Calling CRDA for country: SK cfg80211: Regulatory domain changed to country: SK cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) wlan0: authenticate with e8:ba:70:92:60:4f wlan0: send auth to e8:ba:70:92:60:4f (try 1/3) wlan0: send auth to e8:ba:70:92:60:4f (try 2/3) wlan0: authenticated wlan0: associate with e8:ba:70:92:60:4f (try 1/3) wlan0: RX AssocResp from e8:ba:70:92:60:4f (capab=0x111 status=0 aid=1) wlan0: associated