[ 38775.582] X.Org X Server 1.13.1 Release Date: 2012-12-13 [ 38775.582] X Protocol Version 11, Revision 0 [ 38775.582] Build Operating System: Linux 3.6.11-gentoo x86_64 Gentoo [ 38775.582] Current Operating System: Linux edge 3.6.11-gentoo #3 SMP PREEMPT Fri Jan 25 11:31:01 CET 2013 x86_64 [ 38775.582] Kernel command line: root=/dev/sda1 rw init 2 rootfstype=ext4 rootfsflags=data=writeback,discard elevator=noop acpi_osi=linux i915.semaphores=1 [ 38775.582] Build Date: 30 December 2012 08:40:16PM [ 38775.582] [ 38775.582] Current version of pixman: 0.28.0 [ 38775.582] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 38775.582] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 38775.582] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 8 10:40:45 2013 [ 38775.582] (==) Using config file: "/etc/X11/xorg.conf" [ 38775.582] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 38775.582] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 38775.583] (==) ServerLayout "ServerLayout" [ 38775.583] (**) |-->Screen "Screen0" (0) [ 38775.583] (**) | |-->Monitor "Monitor0" [ 38775.583] (**) | |-->Device "Device0" [ 38775.583] (**) Option "AutoAddDevices" "true" [ 38775.583] (**) Option "AutoEnableDevices" "true" [ 38775.583] (**) Automatically adding devices [ 38775.583] (**) Automatically enabling devices [ 38775.583] (==) Automatically adding GPU devices [ 38775.583] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 38775.583] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 38775.583] (**) Extension "Composite" is enabled [ 38775.583] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 38775.583] (II) Loader magic: 0x80cbe0 [ 38775.583] (II) Module ABI versions: [ 38775.583] X.Org ANSI C Emulation: 0.4 [ 38775.583] X.Org Video Driver: 13.1 [ 38775.583] X.Org XInput driver : 18.0 [ 38775.583] X.Org Server Extension : 7.0 [ 38775.584] (II) config/udev: Adding drm device (/dev/dri/card0) [ 38775.586] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:21b4 rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8 [ 38775.586] (--) PCI: (0:0:2:1) 8086:2a43:17aa:21b4 rev 7, Mem @ 0xf0400000/1048576 [ 38775.587] (II) Open ACPI successful (/var/run/acpid.socket) [ 38775.587] Initializing built-in extension Generic Event Extension [ 38775.587] Initializing built-in extension SHAPE [ 38775.587] Initializing built-in extension MIT-SHM [ 38775.587] Initializing built-in extension XInputExtension [ 38775.587] Initializing built-in extension XTEST [ 38775.587] Initializing built-in extension BIG-REQUESTS [ 38775.587] Initializing built-in extension SYNC [ 38775.587] Initializing built-in extension XKEYBOARD [ 38775.587] Initializing built-in extension XC-MISC [ 38775.587] Initializing built-in extension XINERAMA [ 38775.587] Initializing built-in extension XFIXES [ 38775.587] Initializing built-in extension RENDER [ 38775.587] Initializing built-in extension RANDR [ 38775.587] Initializing built-in extension COMPOSITE [ 38775.587] Initializing built-in extension DAMAGE [ 38775.587] Initializing built-in extension MIT-SCREEN-SAVER [ 38775.587] Initializing built-in extension DOUBLE-BUFFER [ 38775.587] Initializing built-in extension RECORD [ 38775.587] Initializing built-in extension DPMS [ 38775.587] Initializing built-in extension X-Resource [ 38775.587] Initializing built-in extension XVideo [ 38775.587] Initializing built-in extension XVideo-MotionCompensation [ 38775.587] Initializing built-in extension XFree86-VidModeExtension [ 38775.587] Initializing built-in extension XFree86-DGA [ 38775.587] Initializing built-in extension XFree86-DRI [ 38775.587] Initializing built-in extension DRI2 [ 38775.587] (II) "glx" will be loaded by default. [ 38775.587] (II) LoadModule: "int10" [ 38775.587] (II) Loading /usr/lib64/xorg/modules/libint10.so [ 38775.587] (II) Module int10: vendor="X.Org Foundation" [ 38775.587] compiled for 1.13.1, module version = 1.0.0 [ 38775.587] ABI class: X.Org Video Driver, version 13.1 [ 38775.587] (II) LoadModule: "vbe" [ 38775.588] (II) Loading /usr/lib64/xorg/modules/libvbe.so [ 38775.588] (II) Module vbe: vendor="X.Org Foundation" [ 38775.588] compiled for 1.13.1, module version = 1.1.0 [ 38775.588] ABI class: X.Org Video Driver, version 13.1 [ 38775.588] (II) LoadModule: "synaptics" [ 38775.588] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 38775.588] (II) Module synaptics: vendor="X.Org Foundation" [ 38775.588] compiled for 1.13.0, module version = 1.6.2 [ 38775.588] Module class: X.Org XInput Driver [ 38775.588] ABI class: X.Org XInput driver, version 18.0 [ 38775.588] (II) LoadModule: "glx" [ 38775.588] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 38775.588] (II) Module glx: vendor="X.Org Foundation" [ 38775.588] compiled for 1.13.1, module version = 1.0.0 [ 38775.589] ABI class: X.Org Server Extension, version 7.0 [ 38775.589] (==) AIGLX enabled [ 38775.589] Loading extension GLX [ 38775.589] (II) LoadModule: "intel" [ 38775.589] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 38775.589] (II) Module intel: vendor="X.Org Foundation" [ 38775.589] compiled for 1.13.1, module version = 2.20.13 [ 38775.589] Module class: X.Org Video Driver [ 38775.589] ABI class: X.Org Video Driver, version 13.1 [ 38775.589] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 38775.590] (++) using VT number 7 [ 38775.597] (II) intel(0): using device path '/dev/dri/card0' [ 38775.597] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 38775.597] (==) intel(0): RGB weight 888 [ 38775.597] (==) intel(0): Default visual is TrueColor [ 38775.597] (**) intel(0): Option "Tiling" "true" [ 38775.597] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45 [ 38775.598] (**) intel(0): Framebuffer tiled [ 38775.598] (**) intel(0): Pixmaps tiled [ 38775.598] (**) intel(0): 3D buffers tiled [ 38775.598] (**) intel(0): Throttling enabled [ 38775.598] (**) intel(0): Delayed flush enabled [ 38775.598] (**) intel(0): "Tear free" disabled [ 38775.598] (**) intel(0): Forcing per-crtc-pixmaps? no [ 38775.598] (II) intel(0): Output LVDS1 using monitor section Monitor0 [ 38775.598] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware') [ 38775.619] (II) intel(0): Output VGA1 has no monitor section [ 38775.619] (II) intel(0): Output HDMI1 has no monitor section [ 38775.619] (II) intel(0): Output DP1 has no monitor section [ 38775.644] (II) intel(0): Output DP2 has no monitor section [ 38775.644] (II) intel(0): EDID for output LVDS1 [ 38775.644] (II) intel(0): Manufacturer: AUO Model: 102c Serial#: 0 [ 38775.644] (II) intel(0): Year: 2008 Week: 1 [ 38775.644] (II) intel(0): EDID Version: 1.3 [ 38775.644] (II) intel(0): Digital Display Input [ 38775.644] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16 [ 38775.644] (II) intel(0): Gamma: 2.20 [ 38775.644] (II) intel(0): No DPMS capabilities specified [ 38775.644] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 38775.644] (II) intel(0): First detailed timing is preferred mode [ 38775.644] (II) intel(0): redX: 0.585 redY: 0.335 greenX: 0.330 greenY: 0.575 [ 38775.644] (II) intel(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329 [ 38775.644] (II) intel(0): Manufacturer's mask: 0 [ 38775.644] (II) intel(0): Supported detailed timing: [ 38775.644] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 164 mm [ 38775.644] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1456 h_border: 0 [ 38775.644] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0 [ 38775.644] (II) intel(0): Supported detailed timing: [ 38775.644] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 164 mm [ 38775.644] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1696 h_border: 0 [ 38775.644] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 1020 v_border: 0 [ 38775.644] (II) intel(0): Stereo: left channel on sync [ 38775.644] side-by-side interleaved(II) intel(0): AUO [ 38775.644] (II) intel(0): B133XW01 V0 [ 38775.644] (II) intel(0): EDID (in hex): [ 38775.644] (II) intel(0): 00ffffffffffff0006af2c1000000000 [ 38775.644] (II) intel(0): 01120103801d10780af9d59555549327 [ 38775.644] (II) intel(0): 21505400000001010101010101010101 [ 38775.644] (II) intel(0): 010101010101121b565a500019303020 [ 38775.644] (II) intel(0): 360025a410000018121b564a5100fc30 [ 38775.644] (II) intel(0): 3020360025a410000020000000fe0041 [ 38775.644] (II) intel(0): 554f0a202020202020202020000000fe [ 38775.644] (II) intel(0): 004231333358573031205630200a00ba [ 38775.644] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 38775.644] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 38775.644] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 38775.644] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 38775.644] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 38775.644] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 38775.644] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 38775.644] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 38775.645] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 38775.645] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 38775.645] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 38775.645] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 38775.645] (II) intel(0): Printing probed modes for output LVDS1 [ 38775.645] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz UeP) [ 38775.645] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 38775.645] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 38775.645] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 38775.645] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 38775.664] (II) intel(0): EDID for output VGA1 [ 38775.664] (II) intel(0): EDID for output HDMI1 [ 38775.664] (II) intel(0): EDID for output DP1 [ 38775.689] (II) intel(0): EDID for output DP2 [ 38775.689] (II) intel(0): Output LVDS1 connected [ 38775.689] (II) intel(0): Output VGA1 disconnected [ 38775.689] (II) intel(0): Output HDMI1 disconnected [ 38775.689] (II) intel(0): Output DP1 disconnected [ 38775.689] (II) intel(0): Output DP2 disconnected [ 38775.689] (II) intel(0): Using user preference for initial modes [ 38775.689] (II) intel(0): Output LVDS1 using initial mode 1366x768 [ 38775.689] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 38775.689] (==) intel(0): DPI set to (96, 96) [ 38775.689] (II) Loading sub module "dri2" [ 38775.689] (II) LoadModule: "dri2" [ 38775.689] (II) Module "dri2" already built-in [ 38775.689] (==) Depth 24 pixmap format is 32 bpp [ 38775.689] (II) intel(0): SNA initialized with Broadwater backend [ 38775.689] (**) intel(0): Option "BackingStore" "true" [ 38775.689] (**) intel(0): Backing store enabled [ 38775.689] (==) intel(0): Silken mouse enabled [ 38775.689] (II) intel(0): HW Cursor enabled [ 38775.689] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 38775.693] (**) intel(0): DPMS enabled [ 38775.693] (II) intel(0): Overlay video not supported on this hardware [ 38775.693] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 38775.693] (II) intel(0): [DRI2] Setup complete [ 38775.693] (II) intel(0): [DRI2] DRI driver: i965 [ 38775.693] (II) intel(0): direct rendering: DRI2 Enabled [ 38775.693] (==) intel(0): hotplug detection: "enabled" [ 38775.694] (--) RandR disabled [ 38775.709] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 38775.709] (II) AIGLX: enabled GLX_INTEL_swap_event [ 38775.709] (II) AIGLX: enabled GLX_ARB_create_context [ 38775.709] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 38775.709] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 38775.709] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 38775.709] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 38775.709] (II) AIGLX: Loaded and initialized i965 [ 38775.709] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 38775.710] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0) [ 38775.727] (II) intel(0): Setting screen physical size to 361 x 203 [ 38775.782] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 38775.782] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 38775.782] (**) Power Button: Applying InputClass "keyboard" [ 38775.782] (II) LoadModule: "evdev" [ 38775.783] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 38775.783] (II) Module evdev: vendor="X.Org Foundation" [ 38775.783] compiled for 1.13.0, module version = 2.7.3 [ 38775.783] Module class: X.Org XInput Driver [ 38775.783] ABI class: X.Org XInput driver, version 18.0 [ 38775.783] (II) Using input driver 'evdev' for 'Power Button' [ 38775.783] (**) Option "CoreKeyboard" [ 38775.783] (**) Power Button: always reports core events [ 38775.783] (**) evdev: Power Button: Device: "/dev/input/event2" [ 38775.783] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 38775.783] (--) evdev: Power Button: Found keys [ 38775.783] (II) evdev: Power Button: Configuring as keyboard [ 38775.783] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 38775.783] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 38775.783] (**) Option "xkb_rules" "evdev" [ 38775.783] (**) Option "xkb_model" "evdev" [ 38775.783] (**) Option "xkb_layout" "de" [ 38775.783] (**) Option "xkb_variant" "nodeadkeys" [ 38775.825] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 38775.825] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 38775.825] (**) Video Bus: Applying InputClass "keyboard" [ 38775.825] (II) Using input driver 'evdev' for 'Video Bus' [ 38775.825] (**) Option "CoreKeyboard" [ 38775.825] (**) Video Bus: always reports core events [ 38775.825] (**) evdev: Video Bus: Device: "/dev/input/event3" [ 38775.825] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 38775.825] (--) evdev: Video Bus: Found keys [ 38775.825] (II) evdev: Video Bus: Configuring as keyboard [ 38775.825] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3/event3" [ 38775.825] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 38775.825] (**) Option "xkb_rules" "evdev" [ 38775.825] (**) Option "xkb_model" "evdev" [ 38775.825] (**) Option "xkb_layout" "de" [ 38775.825] (**) Option "xkb_variant" "nodeadkeys" [ 38775.826] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 38775.826] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 38775.826] (**) Power Button: Applying InputClass "keyboard" [ 38775.826] (II) Using input driver 'evdev' for 'Power Button' [ 38775.826] (**) Option "CoreKeyboard" [ 38775.826] (**) Power Button: always reports core events [ 38775.826] (**) evdev: Power Button: Device: "/dev/input/event1" [ 38775.826] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 38775.826] (--) evdev: Power Button: Found keys [ 38775.826] (II) evdev: Power Button: Configuring as keyboard [ 38775.826] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 38775.826] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 38775.826] (**) Option "xkb_rules" "evdev" [ 38775.826] (**) Option "xkb_model" "evdev" [ 38775.826] (**) Option "xkb_layout" "de" [ 38775.826] (**) Option "xkb_variant" "nodeadkeys" [ 38775.827] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 38775.827] (II) No input driver specified, ignoring this device. [ 38775.827] (II) This device may have been added with another device file. [ 38775.827] (II) config/udev: Adding drm device (/dev/dri/card0) [ 38775.828] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 38775.828] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 38775.828] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard" [ 38775.828] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 38775.828] (**) Option "CoreKeyboard" [ 38775.828] (**) AT Translated Set 2 keyboard: always reports core events [ 38775.828] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 38775.828] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 38775.828] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 38775.828] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 38775.828] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 38775.828] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 38775.828] (**) Option "xkb_rules" "evdev" [ 38775.828] (**) Option "xkb_model" "evdev" [ 38775.828] (**) Option "xkb_layout" "de" [ 38775.828] (**) Option "xkb_variant" "nodeadkeys" [ 38775.829] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5) [ 38775.829] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad" [ 38775.829] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 38775.829] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad" [ 38775.830] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6) [ 38775.830] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 38775.830] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint" [ 38775.830] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 38775.830] (**) Option "CorePointer" [ 38775.830] (**) TPPS/2 IBM TrackPoint: always reports core events [ 38775.830] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6" [ 38775.830] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa [ 38775.830] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons [ 38775.830] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes [ 38775.830] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes [ 38775.830] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse [ 38775.830] (**) Option "Emulate3Buttons" "false" [ 38775.830] (**) Option "EmulateWheel" "true" [ 38775.830] (**) Option "EmulateWheelButton" "2" [ 38775.830] (**) Option "YAxisMapping" "4 5" [ 38775.830] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 [ 38775.830] (**) Option "XAxisMapping" "6 7" [ 38775.830] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7 [ 38775.830] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 38775.830] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input6/event6" [ 38775.830] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10) [ 38775.830] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes. [ 38775.831] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 [ 38775.831] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 [ 38775.831] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 [ 38775.831] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 [ 38775.831] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1) [ 38775.831] (II) No input driver specified, ignoring this device. [ 38775.831] (II) This device may have been added with another device file. [ 38797.174] (II) config/udev: Adding input device ThinkPad Bluetooth Laser Mouse (/dev/input/mouse2) [ 38797.174] (II) No input driver specified, ignoring this device. [ 38797.174] (II) This device may have been added with another device file. [ 38797.175] (II) config/udev: Adding input device ThinkPad Bluetooth Laser Mouse (/dev/input/event7) [ 38797.175] (**) ThinkPad Bluetooth Laser Mouse: Applying InputClass "evdev pointer catchall" [ 38797.175] (**) ThinkPad Bluetooth Laser Mouse: Applying InputClass "lasermouse" [ 38797.175] (II) Using input driver 'evdev' for 'ThinkPad Bluetooth Laser Mouse' [ 38797.175] (**) Option "CorePointer" [ 38797.175] (**) ThinkPad Bluetooth Laser Mouse: always reports core events [ 38797.175] (**) evdev: ThinkPad Bluetooth Laser Mouse: Device: "/dev/input/event7" [ 38797.176] (--) evdev: ThinkPad Bluetooth Laser Mouse: Vendor 0x17ef Product 0x6038 [ 38797.176] (--) evdev: ThinkPad Bluetooth Laser Mouse: Found 9 mouse buttons [ 38797.176] (--) evdev: ThinkPad Bluetooth Laser Mouse: Found scroll wheel(s) [ 38797.176] (--) evdev: ThinkPad Bluetooth Laser Mouse: Found relative axes [ 38797.176] (--) evdev: ThinkPad Bluetooth Laser Mouse: Found x and y relative axes [ 38797.176] (--) evdev: ThinkPad Bluetooth Laser Mouse: Found absolute axes [ 38797.176] (II) evdev: ThinkPad Bluetooth Laser Mouse: Forcing absolute x/y axes to exist. [ 38797.176] (II) evdev: ThinkPad Bluetooth Laser Mouse: Configuring as mouse [ 38797.176] (II) evdev: ThinkPad Bluetooth Laser Mouse: Adding scrollwheel support [ 38797.176] (**) evdev: ThinkPad Bluetooth Laser Mouse: YAxisMapping: buttons 4 and 5 [ 38797.176] (**) evdev: ThinkPad Bluetooth Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 38797.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/bluetooth/hci0/hci0:11/input13/event7" [ 38797.176] (II) XINPUT: Adding extended input device "ThinkPad Bluetooth Laser Mouse" (type: MOUSE, id 11) [ 38797.176] (II) evdev: ThinkPad Bluetooth Laser Mouse: initialized for relative axes. [ 38797.176] (WW) evdev: ThinkPad Bluetooth Laser Mouse: ignoring absolute axes. [ 38797.176] (**) ThinkPad Bluetooth Laser Mouse: (accel) keeping acceleration scheme 1 [ 38797.176] (**) ThinkPad Bluetooth Laser Mouse: (accel) acceleration profile 0 [ 38797.176] (**) ThinkPad Bluetooth Laser Mouse: (accel) acceleration factor: 2.000 [ 38797.176] (**) ThinkPad Bluetooth Laser Mouse: (accel) acceleration threshold: 4