marc@humonculux:~/kernel-testing$ lsmod | grep i2c
i2c_algo_bit           12841  1 nouveau
i2c_i801               16870  0 
i2c_core               23876  6 i2c_i801,i2c_algo_bit,drm,drm_kms_helper,nouveau,adt7475

--------------------

marc@humonculux:~/kernel-testing$ lsmod | grep nouveau
nouveau               545198  2 
mxm_wmi                12515  1 nouveau
video                  17683  1 nouveau
ttm                    48725  1 nouveau
drm_kms_helper         27227  1 nouveau
drm                   167720  4 drm_kms_helper,ttm,nouveau
i2c_algo_bit           12841  1 nouveau
i2c_core               23876  6 i2c_i801,i2c_algo_bit,drm,drm_kms_helper,nouveau,adt7475
button                 12937  1 nouveau

--------------------

lsmod | grep adt
adt7475                21829  0 
hwmon_vid              12430  1 adt7475
i2c_core               23959  6 i2c_i801,i2c_algo_bit,drm,drm_kms_helper,nouveau,adt7475

--------------------

marc@humonculux:~/kernel-testing$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +36.0°C  (high = +80.0°C, crit = +98.0°C)
Core 0:         +31.0°C  (high = +80.0°C, crit = +98.0°C)
Core 1:         +34.0°C  (high = +80.0°C, crit = +98.0°C)
Core 2:         +33.0°C  (high = +80.0°C, crit = +98.0°C)
Core 3:         +31.0°C  (high = +80.0°C, crit = +98.0°C)

adt7473-i2c-1-2e
Adapter: nouveau-0000:01:00.0-3
in1:          +3.00 V  (min =  +0.00 V, max =  +2.99 V)
+3.3V:        +3.29 V  (min =  +2.96 V, max =  +3.61 V)
fan1:         671 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =  164 RPM)  ALARM
temp1:        +42.2°C  (low  = +65.0°C, high = +85.0°C)  ALARM
                       (crit = +97.0°C, hyst = +97.0°C)
Board Temp:   +41.0°C  (low  = +20.0°C, high = +60.0°C)
                       (crit = +100.0°C, hyst = +100.0°C)
temp3:        +42.0°C  (low  = +80.0°C, high = +105.0°C)  ALARM
                       (crit = +107.0°C, hyst = +103.0°C)

nouveau-pci-0100
Adapter: PCI adapter
temp1:         +0.0°C  (high = +100.0°C, crit = +110.0°C)

--------------------
# cat /sys/class/drm/card0/device/i2c-1/1-002e/pwm1_enable
2

# cat /sys/class/drm/card0/device/i2c-1/1-002e/pwm1
102

# cat /sys/class/drm/card0/device/i2c-1/1-002e/fan1_input 
671

--------------------

# cat /sys/class/drm/card0/device/performance_level*
setting: boot
c: core 399MHz shader 810MHz memory 297MHz voltage 1060mV
0: core 300MHz shader 600MHz memory 100MHz timing 0 voltage 1030mV fanspeed 100%
2: core 400MHz shader 800MHz memory 300MHz timing 1 voltage 1060mV fanspeed 100%
3: core 620MHz shader 1296MHz memory 1080MHz timing 3 voltage 1120mV fanspeed 100%

--------------------
.
  hardware limits: 1.60 GHz - 3.30 GHz
  available frequency steps: 3.30 GHz, 3.30 GHz, 3.10 GHz, 2.90 GHz, 2.70 GHz, 2.50 GHz, 2.30 GHz, 2.10 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz
  available cpufreq governors: userspace, conservative, powersave, ondemand, performance
  current policy: frequency should be within 1.60 GHz and 3.30 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 3.30 GHz (asserted by call to hardware).
  cpufreq stats: 3.30 GHz:4.00%, 3.30 GHz:0.00%, 3.10 GHz:0.00%, 2.90 GHz:0.00%, 2.70 GHz:0.00%, 2.50 GHz:0.01%, 2.30 GHz:0.02%, 2.10 GHz:0.01%, 1.90 GHz:0.02%, 1.70 GHz:0.00%, 1.60 GHz:95.92%  (218)

# lsmod | grep cpu
cpufreq_userspace      12576  0 
cpufreq_stats          12866  0 
cpufreq_conservative    13147  0 
cpufreq_powersave      12454  0 
acpi_cpufreq           12935  1 
mperf                  12453  1 acpi_cpufreq
processor              28157  1 acpi_cpufreq