[ 0.000000] Linux version 3.6.0+ (root@dschgrazlin2.units.it) (gcc version 4.7.2 (GCC) ) #1 SMP Thu Feb 21 10:52:46 CET 2013 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7faffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7fb0000-0x00000000b7fbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b7fc0000-0x00000000b7feffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b7ff0000-0x00000000b7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff380000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF6G-VSTA, BIOS P1.60 06/12/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xb7fb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff] [ 0.000000] log_buf_len: 1048576 [ 0.000000] early log buf free: 13588(82%) [ 0.000000] 2055MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0xb7faffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xb7faffff] [ 0.000000] On node 0 totalpages: 753471 [ 0.000000] free_area_init_node: node 0, pgdat c166c540, node_mem_map f5ffd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4112 pages used for memmap [ 0.000000] HighMem zone: 522146 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: TEMPLATE [ 0.000000] MPTABLE: Product ID: ETEMPLATE [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 2 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0xb8000000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 10 pages/cpu @f5fd7000 s24896 r0 d16064 u40960 [ 0.000000] pcpu-alloc: s24896 r0 d16064 u40960 alloc=10*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747583 [ 0.000000] Kernel command line: BOOT_IMAGE=BISECT ro root=801 log_buf_len=1M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:000b7fb0) [ 0.000000] Memory: 2981156k/3014336k available (5035k kernel code, 32728k reserved, 1574k data, 348k init, 2105032k highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff90000 - 0xfffff000 ( 444 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1675000 - 0xc16cc000 ( 348 kB) .data : 0xc14eafcc - 0xc1674880 (1574 kB) .text : 0xc1000000 - 0xc14eafcc (5035 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2209.817 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.004043] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.63 BogoMIPS (lpj=8839268) [ 0.004126] pid_max: default: 32768 minimum: 301 [ 0.004196] Mount-cache hash table entries: 512 [ 0.004401] CPU: Physical Processor ID: 0 [ 0.004439] CPU: Processor Core ID: 0 [ 0.004477] mce: CPU supports 5 MCE banks [ 0.004519] LVT offset 0 assigned for vector 0xf9 [ 0.004561] process: using AMD E400 aware idle routine [ 0.004608] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 tlb_flushall_shift: 4 [ 0.004752] Freeing SMP alternatives: 20k freed [ 0.004838] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.004960] ExtINT not setup in hardware but reported by MP table [ 0.005451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.008000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.008000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.008000] ..... (found apic 0 pin 0) ... [ 0.051501] ....... works. [ 0.051537] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (fam: 0f, model: 6b, stepping: 02) [ 0.156020] Performance Events: AMD PMU driver. [ 0.156083] ... version: 0 [ 0.156121] ... bit width: 48 [ 0.156159] ... generic registers: 4 [ 0.156197] ... value mask: 0000ffffffffffff [ 0.156237] ... max period: 00007fffffffffff [ 0.156276] ... fixed-purpose events: 0 [ 0.156314] ... event mask: 000000000000000f [ 0.156538] CPU 1 irqstacks, hard=f587a000 soft=f587c000 [ 0.156539] smpboot: Booting Node 0, Processors #1 OK [ 0.008000] Initializing CPU#1 [ 0.244099] Brought up 2 CPUs [ 0.244172] smpboot: Total of 2 processors activated (8839.69 BogoMIPS) [ 0.244678] devtmpfs: initialized [ 0.244678] NET: Registered protocol family 16 [ 0.244678] node 0 link 0: io port [1000, ffffff] [ 0.244678] TOM: 00000000c0000000 aka 3072M [ 0.244678] node 0 link 0: mmio [e0000000, efffffff] [ 0.244678] node 0 link 0: mmio [a0000, bffff] [ 0.244678] node 0 link 0: mmio [c0000000, fe0bffff] [ 0.244678] TOM2: 0000000140000000 aka 5120M [ 0.244678] bus: [bus 00-ff] on node 0 link 0 [ 0.244678] bus: 00 [io 0x0000-0xffff] [ 0.244678] bus: 00 [mem 0xc0000000-0xffffffff] [ 0.244678] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.245311] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.245352] PCI: Using configuration type 1 for base access [ 0.246762] bio: create slab at 0 [ 0.246762] vgaarb: loaded [ 0.246762] SCSI subsystem initialized [ 0.246762] libata version 3.00 loaded. [ 0.246762] usbcore: registered new interface driver usbfs [ 0.248027] usbcore: registered new interface driver hub [ 0.248071] usbcore: registered new device driver usb [ 0.248085] Linux video capture interface: v2.00 [ 0.248152] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.248201] PCI: Probing PCI hardware [ 0.248240] PCI: root bus 00: hardware-probed resources [ 0.248244] PCI: Probing PCI hardware (bus 00) [ 0.248259] PCI host bridge to bus 0000:00 [ 0.248299] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.248341] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.248383] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.248426] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.248493] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000 [ 0.248644] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100 [ 0.248682] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500 [ 0.248694] pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc3f] [ 0.248709] pci 0000:00:01.1: reg 20: [io 0x5000-0x503f] [ 0.248714] pci 0000:00:01.1: reg 24: [io 0x6000-0x603f] [ 0.248734] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.248748] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000 [ 0.248788] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310 [ 0.248798] pci 0000:00:02.0: reg 10: [mem 0xdffff000-0xdfffffff] [ 0.248827] pci 0000:00:02.0: supports D1 D2 [ 0.248829] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248841] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320 [ 0.248851] pci 0000:00:02.1: reg 10: [mem 0xdfffec00-0xdfffecff] [ 0.248885] pci 0000:00:02.1: supports D1 D2 [ 0.248887] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248905] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401 [ 0.248939] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a [ 0.248961] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf] [ 0.248988] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000 [ 0.248997] pci 0000:00:07.0: reg 10: [mem 0xdfffd000-0xdfffdfff] [ 0.249002] pci 0000:00:07.0: reg 14: [io 0xd480-0xd487] [ 0.249028] pci 0000:00:07.0: supports D1 D2 [ 0.249030] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249045] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185 [ 0.249053] pci 0000:00:08.0: reg 10: [io 0x0e00-0x0e07] [ 0.249058] pci 0000:00:08.0: reg 14: [io 0x0e20-0x0e23] [ 0.249062] pci 0000:00:08.0: reg 18: [io 0x0e40-0x0e47] [ 0.249066] pci 0000:00:08.0: reg 1c: [io 0x0e60-0x0e63] [ 0.249071] pci 0000:00:08.0: reg 20: [io 0xc880-0xc88f] [ 0.249075] pci 0000:00:08.0: reg 24: [mem 0xdfffc000-0xdfffcfff] [ 0.249098] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185 [ 0.249106] pci 0000:00:08.1: reg 10: [io 0x0e80-0x0e87] [ 0.249111] pci 0000:00:08.1: reg 14: [io 0x0ea0-0x0ea3] [ 0.249115] pci 0000:00:08.1: reg 18: [io 0x0ec0-0x0ec7] [ 0.249119] pci 0000:00:08.1: reg 1c: [io 0x0ee0-0x0ee3] [ 0.249124] pci 0000:00:08.1: reg 20: [io 0xc000-0xc00f] [ 0.249128] pci 0000:00:08.1: reg 24: [mem 0xdfffb000-0xdfffbfff] [ 0.249157] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400 [ 0.249176] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249191] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400 [ 0.249210] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249223] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400 [ 0.249242] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249253] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000 [ 0.249260] pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff] [ 0.249266] pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.249271] pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit] [ 0.249278] pci 0000:00:0d.0: reg 30: [mem 0xdffc0000-0xdffdffff pref] [ 0.249300] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.249318] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.249330] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.249343] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.249388] pci 0000:01:08.0: [9710:9835] type 00 class 0x070002 [ 0.249399] pci 0000:01:08.0: reg 10: [io 0xec00-0xec07] [ 0.249407] pci 0000:01:08.0: reg 14: [io 0xe880-0xe887] [ 0.249414] pci 0000:01:08.0: reg 18: [io 0xe800-0xe807] [ 0.249422] pci 0000:01:08.0: reg 1c: [io 0xe480-0xe487] [ 0.249430] pci 0000:01:08.0: reg 20: [io 0xe400-0xe407] [ 0.249437] pci 0000:01:08.0: reg 24: [io 0xe080-0xe08f] [ 0.249460] pci 0000:01:0a.0: [1274:5880] type 00 class 0x040100 [ 0.249473] pci 0000:01:0a.0: reg 10: [io 0xe000-0xe03f] [ 0.249519] pci 0000:01:0a.0: supports D2 [ 0.249542] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode) [ 0.249587] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 0.249591] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.249593] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.249595] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.249616] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.249678] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.249740] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.250007] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.250203] pci 0000:00:01.0: default IRQ router [10de:03e0] [ 0.250249] PCI: pci_cache_line_size set to 64 bytes [ 0.250284] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.250286] e820: reserve RAM buffer [mem 0xb7fb0000-0xb7ffffff] [ 0.250489] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.250489] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 0.252025] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.252069] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.252112] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.252160] pci 0000:00:04.0: setting latency timer to 64 [ 0.252167] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.252170] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xffffffff] [ 0.252172] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.252174] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.252176] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.252178] pci_bus 0000:01: resource 5 [mem 0xc0000000-0xffffffff] [ 0.252180] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.252218] NET: Registered protocol family 2 [ 0.252389] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.253056] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.253411] TCP: Hash tables configured (established 131072 bind 65536) [ 0.253502] TCP: reno registered [ 0.253542] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.253592] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.253694] NET: Registered protocol family 1 [ 0.253758] RPC: Registered named UNIX socket transport module. [ 0.253758] RPC: Registered udp transport module. [ 0.253758] RPC: Registered tcp transport module. [ 0.253758] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.253758] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 34 [ 0.324038] pci 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 35 [ 0.324105] pci 0000:00:0d.0: Boot video device [ 0.324116] PCI: CLS 64 bytes, default 64 [ 0.324212] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.324321] bounce pool size: 64 pages [ 0.324321] VFS: Disk quotas dquot_6.5.2 [ 0.324321] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.324321] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.324321] NTFS driver 2.1.30 [Flags: R/W]. [ 0.324321] msgmni has been set to 1711 [ 0.324321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.324321] io scheduler noop registered [ 0.324321] io scheduler deadline registered [ 0.324321] io scheduler cfq registered (default) [ 0.324321] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.344027] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.364026] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.364075] serial 0000:01:08.0: PCI->APIC IRQ transform: INT A -> IRQ 35 [ 0.384027] 0000:01:08.0: ttyS2 at I/O 0xec00 (irq = 35) is a 16550A [ 0.384078] DoubleTalk PC - not found [ 0.388053] Real Time Clock Driver v1.12b [ 0.388083] Linux agpgart interface v0.103 [ 0.388263] [drm] Initialized drm 1.1.0 20060810 [ 0.388320] nouveau 0000:00:0d.0: setting latency timer to 64 [ 0.388327] nouveau 0000:00:0d.0: PCI->APIC IRQ transform: INT A -> IRQ 34 [ 0.388416] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2 [ 0.388416] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C) [ 0.388416] nouveau [ DEVICE][0000:00:0d.0] Family : NV40 [ 0.388964] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image... [ 0.432073] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid [ 0.434802] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN [ 0.435051] nouveau [ VBIOS][0000:00:0d.0] BIT signature found [ 0.435095] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.22 [ 0.435228] nouveau [ PFB][0000:00:0d.0] RAM type: unknown [ 0.435271] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB [ 0.460727] [TTM] Zone kernel: Available graphics memory: 438072 kiB [ 0.460727] [TTM] Zone highmem: Available graphics memory: 1490588 kiB [ 0.460727] [TTM] Initializing pool allocator [ 0.460727] nouveau [ DRM] VRAM: 125 MiB [ 0.460727] nouveau [ DRM] GART: 512 MiB [ 0.460727] nouveau [ DRM] BIT BIOS found [ 0.460727] nouveau [ DRM] Bios version 05.61.32.22 [ 0.460727] nouveau [ DRM] TMDS table version 1.1 [ 0.460727] nouveau [ DRM] DCB version 3.0 [ 0.460727] nouveau [ DRM] DCB outp 00: 01000310 00000023 [ 0.460727] nouveau [ DRM] DCB outp 01: 00110204 97e50000 [ 0.460727] nouveau [ DRM] DCB conn 00: 0000 [ 0.461064] nouveau [ DRM] Saving VGA fonts [ 0.504061] nouveau W[ DRM] DCB type 4 not known [ 0.504102] nouveau W[ DRM] Unknown-1 has no encoders, removing [ 0.505073] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.505115] [drm] No driver support for vblank timestamp query. [ 0.505908] nouveau [ DRM] 1 available performance level(s) [ 0.505952] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100% [ 0.505995] nouveau [ DRM] c: [ 0.507546] nouveau [ DRM] MM: using M2MF for buffer copies [ 0.507591] nouveau [ DRM] Setting dpms mode 3 on vga encoder (output 0) [ 0.556802] nouveau [ DRM] allocated 1600x1200 fb: 0x9000, bo f5955400 [ 0.556868] fbcon: nouveaufb (fb0) is primary device [ 0.626417] nouveau [ DRM] Setting dpms mode 0 on vga encoder (output 0) [ 0.626419] nouveau [ DRM] Output VGA-1 is running on CRTC 0 using output A [ 0.632871] Console: switching to colour frame buffer device 200x75 [ 0.636564] fb0: nouveaufb frame buffer device [ 0.636568] drm: registered panic notifier [ 0.636575] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0 [ 0.636730] parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] [ 0.636756] parport0: irq 7 detected [ 0.636857] Floppy drive(s): fd0 is 1.44M [ 0.637397] brd: module loaded [ 0.637397] loop: module loaded [ 0.637397] Uniform Multi-Platform E-IDE driver [ 0.637397] amd74xx 0000:00:06.0: UDMA133 controller [ 0.637397] amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2) [ 0.637397] amd74xx 0000:00:06.0: IDE port disabled [ 0.637397] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later [ 0.637397] ide0: BM-DMA at 0xffa0-0xffa7 [ 0.637397] Probing IDE interface ide0... [ 1.372187] hda: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive [ 1.708127] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 1.715044] hda: UDMA/33 mode selected [ 1.716417] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.716600] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.716611] ide-gd driver 1.18 [ 1.716624] ide-cd driver 5.00 [ 1.716125] ide-cd: hda: ATAPI 48X DVD-ROM drive, 256kB Cache [ 1.716143] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.740159] ppa: Version 2.07 (for Linux 2.4.x) [ 1.745243] imm: Version 2.05 (for Linux 2.4.0) [ 1.745696] sata_nv 0000:00:08.0: version 3.5 [ 1.745706] sata_nv 0000:00:08.0: PCI->APIC IRQ transform: INT A -> IRQ 34 [ 1.745772] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.745922] scsi0 : sata_nv [ 1.745969] scsi1 : sata_nv [ 1.745969] ata1: SATA max UDMA/133 cmd 0xe00 ctl 0xe20 bmdma 0xc880 irq 34 [ 1.745969] ata2: SATA max UDMA/133 cmd 0xe40 ctl 0xe60 bmdma 0xc888 irq 34 [ 1.745969] sata_nv 0000:00:08.1: PCI->APIC IRQ transform: INT B -> IRQ 34 [ 1.745969] sata_nv 0000:00:08.1: setting latency timer to 64 [ 1.745969] scsi2 : sata_nv [ 1.745969] scsi3 : sata_nv [ 1.745969] ata3: SATA max UDMA/133 cmd 0xe80 ctl 0xea0 bmdma 0xc000 irq 34 [ 1.745969] ata4: SATA max UDMA/133 cmd 0xec0 ctl 0xee0 bmdma 0xc008 irq 34 [ 1.745969] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.745969] forcedeth 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 34 [ 1.745969] forcedeth 0000:00:07.0: setting latency timer to 64 [ 2.060133] ata1: SATA link down (SStatus 0 SControl 300) [ 2.212164] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.220239] ata3.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 [ 2.220239] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.220239] ata3.00: failed to get Identify Device Data, Emask 0x1 [ 2.236237] ata3.00: failed to get Identify Device Data, Emask 0x1 [ 2.236237] ata3.00: configured for UDMA/133 [ 2.268750] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:37:b5:c1 [ 2.268761] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 2.268781] PPP generic driver version 2.4.2 [ 2.268811] PPP BSD Compression module registered [ 2.268811] PPP Deflate Compression module registered [ 2.268811] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 2.268811] CSLIP: code copyright 1989 Regents of the University of California. [ 2.268811] SLIP linefill/keepalive option. [ 2.268975] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.269849] ohci_hcd 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 34 [ 2.270765] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.270768] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.272152] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.273104] ohci_hcd 0000:00:02.0: irq 34, io mem 0xdffff000 [ 2.330169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.330522] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.331046] usb usb1: Product: OHCI Host Controller [ 2.332007] usb usb1: Manufacturer: Linux 3.6.0+ ohci_hcd [ 2.332149] usb usb1: SerialNumber: 0000:00:02.0 [ 2.333117] hub 1-0:1.0: USB hub found [ 2.333117] hub 1-0:1.0: 10 ports detected [ 2.334137] usbcore: registered new interface driver usblp [ 2.336157] usbcore: registered new interface driver uas [ 2.337106] Initializing USB Mass Storage driver... [ 2.338077] usbcore: registered new interface driver usb-storage [ 2.339021] USB Mass Storage support registered. [ 2.340179] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.344626] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.344985] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.345568] mousedev: PS/2 mouse device common for all mice [ 2.345568] uvcvideo: Unable to create debugfs directory [ 2.345568] usbcore: registered new interface driver uvcvideo [ 2.348150] USB Video Class driver (1.1.1) [ 2.349098] EDAC MC: Ver: 3.0.0 [ 2.350143] usbcore: registered new interface driver usbhid [ 2.350143] usbhid: USB HID core driver [ 2.352211] snd_ens1371 0000:01:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 34 [ 2.372204] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.660173] usb 1-4: new full-speed USB device number 2 using ohci_hcd [ 2.932194] usb 1-4: New USB device found, idVendor=046d, idProduct=0825 [ 2.932550] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.933091] usb 1-4: SerialNumber: 56E6B6C0 [ 2.936237] uvcvideo: Found UVC 1.00 device (046d:0825) [ 2.960232] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input1 [ 3.168233] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.608256] Netfilter messages via NETLINK v0.30. [ 3.608672] xt_time: kernel timezone is -0000 [ 3.609339] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.610381] arp_tables: (C) 2002 David S. Miller [ 3.610381] TCP: cubic registered [ 3.610381] Initializing XFRM netlink socket [ 3.612264] NET: Registered protocol family 10 [ 3.613446] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.614180] sit: IPv6 over IPv4 tunneling driver [ 3.614180] NET: Registered protocol family 17 [ 3.616301] Using IPI No-Shortcut mode [ 3.617113] ALSA device list: [ 3.617113] #0: Ensoniq AudioPCI ENS1371 at 0xe000, irq 34 [ 3.656241] floppy0: no floppy controllers found [ 3.972254] ata2: SATA link down (SStatus 0 SControl 300) [ 3.972675] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 [ 3.972729] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.972771] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.976272] sd 2:0:0:0: [sda] Write Protect is off [ 3.977098] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.977117] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.992274] sda: sda1 sda2 [ 3.996353] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.440302] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.448376] ata4.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133 [ 4.448705] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.608300] ata4.00: failed to get Identify Device Data, Emask 0x1 [ 4.784310] ata4.00: failed to get Identify Device Data, Emask 0x1 [ 4.784313] ata4.00: configured for UDMA/133 [ 4.784661] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM325031 3.AA PQ: 0 ANSI: 5 [ 4.784965] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 4.785007] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 4.788318] sd 3:0:0:0: [sdb] Write Protect is off [ 4.789235] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.789252] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.796316] sdb: sdb1 sdb2 [ 4.796746] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.800566] EXT3-fs (sda1): recovery required on readonly filesystem [ 4.800989] EXT3-fs (sda1): write access will be enabled during recovery [ 6.284414] kjournald starting. Commit interval 5 seconds [ 6.292619] EXT3-fs (sda1): recovery complete [ 6.292755] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 6.293443] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 6.328431] devtmpfs: mounted [ 6.328809] Freeing unused kernel memory: 348k freed [ 11.917669] systemd-udevd[117]: starting version 196 [ 12.761222] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k [ 20.769753] EXT3-fs (sda1): using internal journal [ 182.728917] tty_init_dev: 1 callbacks suppressed [ 183.264405] nouveau [ DRM] Setting dpms mode 3 on vga encoder (output 0) [ 183.284584] nouveau [ DRM] Setting dpms mode 0 on vga encoder (output 0) [ 183.284587] nouveau [ DRM] Output VGA-1 is running on CRTC 0 using output A [ 228.222823] nouveau [ DRM] Setting dpms mode 3 on vga encoder (output 0) [ 228.244788] nouveau [ DRM] Setting dpms mode 0 on vga encoder (output 0) [ 228.244808] nouveau [ DRM] Output VGA-1 is running on CRTC 0 using output A [ 251.713810] nouveau E[ 891] failed to idle channel 0xcccc0000 [ 251.729809] nouveau E[ 809] failed to idle channel 0xcccc0000 [ 254.730222] nouveau E[ 809] failed to idle channel 0xcccc0000 [ 257.730630] nouveau E[ 809] failed to idle channel 0xcccc0000 [ 260.731059] nouveau E[ 809] failed to idle channel 0xcccc0000 [ 263.731473] nouveau E[ 809] failed to idle channel 0xcccc0000 [ 266.731878] nouveau E[ 809] failed to idle channel 0xcccc0000