[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.3 (root@desktop_franz) (gcc version 4.6.3 (Gentoo 4.6.3 p1.0, pie-0.5.1) ) #2 SMP PREEMPT Fri Mar 15 18:07:19 CET 2013 [ 0.000000] Command line: root=/dev/sda2 raid=noautodetect usbcore.autosuspend=-1 pci=nomsi pcie_aspm=force snd_hda_intel.position_fix=2 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000aed84fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aed85000-0x00000000aedd1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aedd2000-0x00000000aedd9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000aedda000-0x00000000aee05fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aee06000-0x00000000aee06fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aee07000-0x00000000aee09fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aee0a000-0x00000000aee0afff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000aee0b000-0x00000000aee14fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aee15000-0x00000000aee3bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aee3c000-0x00000000aee7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aee7f000-0x00000000aeffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68M-ITX/HT, BIOS P1.20 08/16/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 5 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xaf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0xaeffffff] [ 0.000000] [mem 0x00000000-0xaeffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xaeffffff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x23fdfffff] [ 0.000000] [mem 0x100000000-0x23fdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x23fdfffff @ [mem 0xaeffa000-0xaeffffff] [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000aedd2068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000aedd8b00 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000aedd2150 069AB (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000aee0cf80 00040 [ 0.000000] ACPI: APIC 00000000aedd8bf8 00092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000aedd8c90 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000aedd8e68 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000aedd8ea8 000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000aedd8f68 00038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237800000-ffff88023f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xaed84fff] [ 0.000000] node 0: [mem 0xaee06000-0xaee06fff] [ 0.000000] node 0: [mem 0xaee7f000-0xaeffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fdfffff] [ 0.000000] On node 0 totalpages: 2025620 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 141 pages reserved [ 0.000000] DMA zone: 3776 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11117 pages used for memmap [ 0.000000] DMA32 zone: 700314 pages, LIFO batch:31 [ 0.000000] Normal zone: 20472 pages used for memmap [ 0.000000] Normal zone: 1289736 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88023fa00000 s72832 r8192 d21376 u262144 [ 0.000000] pcpu-alloc: s72832 r8192 d21376 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1993826 [ 0.000000] Kernel command line: root=/dev/sda2 raid=noautodetect usbcore.autosuspend=-1 pci=nomsi pcie_aspm=force snd_hda_intel.position_fix=2 [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 7886188k/9435136k available (5640k kernel code, 1332656k absent, 216292k reserved, 2651k data, 516k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 3392.289 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.26 BogoMIPS (lpj=11307630) [ 0.000071] pid_max: default: 32768 minimum: 301 [ 0.000121] Mount-cache hash table entries: 256 [ 0.000248] CPU: Physical Processor ID: 0 [ 0.000290] CPU: Processor Core ID: 0 [ 0.000324] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000394] mce: CPU supports 9 MCE banks [ 0.000435] CPU0: Thermal monitoring enabled (TM1) [ 0.000473] process: using mwait in idle threads [ 0.000508] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.000693] Freeing SMP alternatives: 20k freed [ 0.000730] ACPI: Core revision 20121018 [ 0.004267] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.037211] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07) [ 0.037288] TSC deadline timer enabled [ 0.037290] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.037368] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.037430] ... version: 3 [ 0.037462] ... bit width: 48 [ 0.037495] ... generic registers: 4 [ 0.037527] ... value mask: 0000ffffffffffff [ 0.037562] ... max period: 000000007fffffff [ 0.037596] ... fixed-purpose events: 3 [ 0.037629] ... event mask: 000000070000000f [ 0.057279] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK [ 0.160297] Brought up 8 CPUs [ 0.160334] smpboot: Total of 8 processors activated (54298.15 BogoMIPS) [ 0.165956] devtmpfs: initialized [ 0.166119] NET: Registered protocol family 16 [ 0.166212] kworker/u:0 (52) used greatest stack depth: 6856 bytes left [ 0.166251] kworker/u:0 (53) used greatest stack depth: 5992 bytes left [ 0.166382] ACPI: bus type pci registered [ 0.166455] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.166520] PCI: not using MMCONFIG [ 0.166552] PCI: Using configuration type 1 for base access [ 0.169054] bio: create slab at 0 [ 0.169137] ACPI: Added _OSI(Module Device) [ 0.169173] ACPI: Added _OSI(Processor Device) [ 0.169206] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.169240] ACPI: Added _OSI(Processor Aggregator Device) [ 0.169874] ACPI: EC: Look up EC in DSDT [ 0.170470] ACPI: Executed 1 blocks of module-level executable AML code [ 0.171960] ACPI: SSDT 00000000aee14898 006F4 (v01 AMI IST 00000001 MSFT 03000001) [ 0.172228] ACPI: Dynamic OEM Table Load: [ 0.172267] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001) [ 0.172355] ACPI: SSDT 00000000aee0bd98 000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 0.172574] ACPI: Dynamic OEM Table Load: [ 0.172612] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 0.173099] ACPI: Interpreter enabled [ 0.173132] ACPI: (supports S0 S5) [ 0.173172] ACPI: Using IOAPIC for interrupt routing [ 0.173218] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.173321] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.196106] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.198678] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.198823] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.198861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.198977] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.199169] PCI host bridge to bus 0000:00 [ 0.199203] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.199239] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.199275] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.199311] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.199348] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.199384] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.199421] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.199458] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff] [ 0.199500] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.199526] pci 0000:00:02.0: [8086:0122] type 00 class 0x030000 [ 0.199534] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit] [ 0.199538] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.199541] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.199604] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.199636] pci 0000:00:16.0: reg 10: [mem 0xfe508000-0xfe50800f 64bit] [ 0.199741] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.199788] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.199817] pci 0000:00:1a.0: reg 10: [mem 0xfe507000-0xfe5073ff] [ 0.199943] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.199978] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.199999] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit] [ 0.200100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.200128] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.200242] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.200277] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.200390] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.200423] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.200536] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.200577] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.200605] pci 0000:00:1d.0: reg 10: [mem 0xfe506000-0xfe5063ff] [ 0.200732] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.200763] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100 [ 0.200929] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.200957] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7] [ 0.200968] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3] [ 0.200979] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097] [ 0.200991] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083] [ 0.201003] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.201014] pci 0000:00:1f.2: reg 24: [mem 0xfe505000-0xfe5057ff] [ 0.201083] pci 0000:00:1f.2: PME# supported from D3hot [ 0.201108] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.201130] pci 0000:00:1f.3: reg 10: [mem 0xfe504000-0xfe5040ff 64bit] [ 0.201162] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.201264] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.201396] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.201420] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff] [ 0.201461] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.201487] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.201600] pci 0000:02:00.0: supports D1 D2 [ 0.201601] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.205769] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.206274] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.206284] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.206377] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.206412] pci 0000:03:00.0: reg 10: [mem 0xfe400000-0xfe407fff 64bit] [ 0.206593] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.212417] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.212469] pci 0000:00:1c.5: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.212505] pci_bus 0000:00: on NUMA node 0 [ 0.212518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.212535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.212550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.212568] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.214218] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.214314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.214407] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.214498] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.214589] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.214709] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.214829] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.214923] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.215062] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.215125] vgaarb: loaded [ 0.215157] vgaarb: bridge control possible 0000:00:02.0 [ 0.215245] SCSI subsystem initialized [ 0.215278] ACPI: bus type scsi registered [ 0.215351] libata version 3.00 loaded. [ 0.215364] ACPI: bus type usb registered [ 0.215421] usbcore: registered new interface driver usbfs [ 0.215470] usbcore: registered new interface driver hub [ 0.215522] usbcore: registered new device driver usb [ 0.215634] Advanced Linux Sound Architecture Driver Initialized. [ 0.215671] PCI: Using ACPI for IRQ routing [ 0.225928] PCI: pci_cache_line_size set to 64 bytes [ 0.225977] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.225978] e820: reserve RAM buffer [mem 0xaed85000-0xafffffff] [ 0.225980] e820: reserve RAM buffer [mem 0xaee07000-0xafffffff] [ 0.225981] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff] [ 0.225982] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff] [ 0.226084] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.226148] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.228186] Switching to clocksource hpet [ 0.228255] pnp: PnP ACPI init [ 0.228288] ACPI: bus type pnp registered [ 0.228379] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.228417] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.228454] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.228490] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.228528] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.228565] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.228613] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.228650] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.228710] pnp 00:02: [dma 4] [ 0.228729] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.228753] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.228772] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.228808] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.228844] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.228867] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.228896] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.229002] system 00:08: [io 0x0400-0x0453] has been reserved [ 0.229063] system 00:08: [io 0x0458-0x047f] has been reserved [ 0.229099] system 00:08: [io 0x1180-0x119f] has been reserved [ 0.229135] system 00:08: [io 0x0500-0x057f] has been reserved [ 0.229172] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.229208] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.229246] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.229283] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.229320] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.229359] system 00:09: [io 0x0454-0x0457] has been reserved [ 0.229395] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.229466] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.229538] pnp: PnP ACPI: found 11 devices [ 0.229572] ACPI: ACPI bus type pnp unregistered [ 0.235509] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.235557] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.235593] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.235637] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.235705] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.235744] pci 0000:00:1c.5: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.235812] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.235813] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.235814] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.235815] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.235817] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.235818] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.235819] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff] [ 0.235820] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.235821] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.235823] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.235837] NET: Registered protocol family 2 [ 0.235922] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.236080] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.236205] TCP: Hash tables configured (established 65536 bind 65536) [ 0.236253] TCP: reno registered [ 0.236285] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.236337] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.236416] NET: Registered protocol family 1 [ 0.236494] RPC: Registered named UNIX socket transport module. [ 0.236529] RPC: Registered udp transport module. [ 0.236563] RPC: Registered tcp transport module. [ 0.236597] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.236637] pci 0000:00:02.0: Boot video device [ 1.614283] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.996996] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.997204] PCI: CLS 64 bytes, default 64 [ 2.997215] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.997252] software IO TLB [mem 0xaad85000-0xaed85000] (64MB) mapped at [ffff8800aad85000-ffff8800aed84fff] [ 2.998676] sha1_ssse3: Using AVX optimized SHA-1 implementation [ 2.999022] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.000863] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.001052] msgmni has been set to 15402 [ 3.001571] NET: Registered protocol family 38 [ 3.001640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.001701] io scheduler noop registered [ 3.001754] io scheduler cfq registered (default) [ 3.002069] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 3.002103] crc32: self tests passed, processed 225944 bytes in 138146 nsec [ 3.002281] crc32c: CRC_LE_BITS = 64 [ 3.002313] crc32c: self tests passed, processed 225944 bytes in 69911 nsec [ 3.002369] xz_dec_test: module loaded [ 3.002402] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 3.002790] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.002854] ACPI: Power Button [PWRB] [ 3.002913] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.002975] ACPI: Power Button [PWRF] [ 3.003050] ACPI: Requesting acpi_cpufreq [ 3.003241] Monitor-Mwait will be used to enter C-3 state [ 3.003244] Monitor-Mwait will be used to enter C-3 state [ 3.003256] ACPI: acpi_idle registered with cpuidle [ 3.010410] Linux agpgart interface v0.103 [ 3.010461] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 3.010524] Hangcheck: Using getrawmonotonic(). [ 3.010576] [drm] Initialized drm 1.1.0 20060810 [ 3.010930] [drm] Memory usable by graphics device = 2048M [ 3.010967] i915 0000:00:02.0: setting latency timer to 64 [ 3.035721] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.035758] [drm] Driver supports precise vblank timestamp query. [ 3.035834] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.665085] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 3.734174] fbcon: inteldrmfb (fb0) is primary device [ 3.953566] Console: switching to colour frame buffer device 240x67 [ 3.956454] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.956471] i915 0000:00:02.0: registered panic notifier [ 3.956494] i915: No ACPI video bus found [ 3.956531] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.956996] loop: module loaded [ 3.957114] ahci 0000:00:1f.2: version 3.0 [ 3.957152] ahci: SSS flag set, parallel bus scan disabled [ 3.967585] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode [ 3.967629] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 3.967656] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.994478] scsi0 : ahci [ 3.994533] scsi1 : ahci [ 3.994580] scsi2 : ahci [ 3.994627] scsi3 : ahci [ 3.994674] scsi4 : ahci [ 3.994721] scsi5 : ahci [ 3.994762] ata1: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505100 irq 19 [ 3.994783] ata2: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505180 irq 19 [ 3.994803] ata3: DUMMY [ 3.994812] ata4: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505280 irq 19 [ 3.994833] ata5: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505300 irq 19 [ 3.994854] ata6: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505380 irq 19 [ 3.995057] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.995346] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000036000, 00:25:22:d9:dc:07, XID 0c900800 IRQ 19 [ 3.995374] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.995436] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.995455] ehci-pci: EHCI PCI platform driver [ 3.995484] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 3.995487] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.995504] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.995536] ehci-pci 0000:00:1a.0: debug port 2 [ 3.997466] tsc: Refined TSC clocksource calibration: 3392.293 MHz [ 3.997484] Switching to clocksource tsc [ 3.999438] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.999441] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe507000 [ 4.007427] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.007576] hub 1-0:1.0: USB hub found [ 4.007590] hub 1-0:1.0: 2 ports detected [ 4.007652] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 4.007655] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.007672] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.007703] ehci-pci 0000:00:1d.0: debug port 2 [ 4.011609] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.011619] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe506000 [ 4.020722] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.020855] hub 2-0:1.0: USB hub found [ 4.020868] hub 2-0:1.0: 2 ports detected [ 4.021739] uhci_hcd: USB Universal Host Controller Interface driver [ 4.022581] Initializing USB Mass Storage driver... [ 4.023426] usbcore: registered new interface driver usb-storage [ 4.024254] USB Mass Storage support registered. [ 4.025109] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 4.025939] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 4.027456] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.028377] mousedev: PS/2 mouse device common for all mice [ 4.029336] usbcore: registered new interface driver wacom [ 4.030195] rtc_cmos 00:03: RTC can wake from S4 [ 4.031141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 4.032017] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.032890] i2c /dev entries driver [ 4.033942] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 4.034911] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 4.035811] cpuidle: using governor ladder [ 4.036941] usbcore: registered new interface driver usbhid [ 4.037781] usbhid: USB HID core driver [ 4.038608] Netfilter messages via NETLINK v0.30. [ 4.039418] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.040289] ctnetlink v0.93: registering with nfnetlink. [ 4.041132] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.041946] TCP: cubic registered [ 4.042756] NET: Registered protocol family 17 [ 4.044814] ALSA device list: [ 4.045579] No soundcards found. [ 4.051103] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 4.313237] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.313243] ata1: SATA link down (SStatus 0 SControl 300) [ 4.340019] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4.440442] hub 1-1:1.0: USB hub found [ 4.441371] hub 1-1:1.0: 6 ports detected [ 4.552541] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.638978] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.642086] ata2.00: ATA-8: WDC WD10EALX-009BA0, 15.01H15, max UDMA/133 [ 4.642918] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.645781] ata2.00: configured for UDMA/133 [ 4.646687] scsi 1:0:0:0: Direct-Access ATA WDC WD10EALX-009 15.0 PQ: 0 ANSI: 5 [ 4.647898] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.648096] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.649672] sd 1:0:0:0: [sda] Write Protect is off [ 4.650494] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.650502] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.676480] hub 2-1:1.0: USB hub found [ 4.677428] hub 2-1:1.0: 8 ports detected [ 4.706992] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 4.708742] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.745394] usb 1-1.4: new full-speed USB device number 3 using ehci-pci [ 4.845614] input: Wacom Bamboo Pen Pen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3 [ 4.849340] input: Wacom Bamboo Pen Finger as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input4 [ 4.948181] usb 2-1.3: new low-speed USB device number 3 using ehci-pci [ 4.964717] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.982167] ata4.00: ATAPI: BDROM 4X12X32X, CA32, max UDMA/100 [ 4.996055] ata4.00: configured for UDMA/100 [ 4.997967] scsi 3:0:0:0: CD-ROM BDROM 4X12X32X CA32 PQ: 0 ANSI: 5 [ 5.000071] sr0: scsi3-mmc drive: 94x/94x cd/rw xa/form2 cdda tray [ 5.000930] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.001993] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 5.002131] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 5.040877] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5 [ 5.042102] hid-generic 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0 [ 5.323687] ata5: SATA link down (SStatus 0 SControl 300) [ 5.642773] ata6: SATA link down (SStatus 0 SControl 300) [ 5.655420] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 5.656587] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 5.678890] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.679767] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 5.681107] Freeing unused kernel memory: 516k freed [ 6.451607] kbd_mode (1173) used greatest stack depth: 5976 bytes left [ 6.481770] loadkeys (1174) used greatest stack depth: 5352 bytes left [ 6.482717] init-early.sh (1172) used greatest stack depth: 4872 bytes left [ 7.538356] systemd-udevd[1276]: starting version 198 [ 8.098772] cdrom_id (1348) used greatest stack depth: 4744 bytes left [ 10.609104] w83627ehf: Found NCT6776F chip at 0x290 [ 11.829599] EXT4-fs (sda2): re-mounted. Opts: (null) [ 11.991324] mount (1506) used greatest stack depth: 4520 bytes left [ 12.141503] Adding 8388604k swap on /dev/sda3. Priority:-1 extents:1 across:8388604k [ 12.221922] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 12.268009] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 12.311496] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 12.404152] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 15.778982] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2) [ 15.792553] r8169 0000:02:00.0 eth0: link down [ 15.792560] r8169 0000:02:00.0 eth0: link down [ 18.078609] r8169 0000:02:00.0 eth0: link up [ 36.781537] ata2.00: configured for UDMA/133 [ 36.781540] ata2: EH complete [ 36.807756] EXT4-fs (sda2): re-mounted. Opts: commit=0 [ 37.146971] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 37.274453] EXT4-fs (sda6): re-mounted. Opts: commit=0 [ 37.711316] EXT4-fs (sda7): re-mounted. Opts: commit=0 [ 37.712663] EXT4-fs (sda8): re-mounted. Opts: commit=0 [ 4445.959542] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 4823.092475] patch (4922) used greatest stack depth: 4504 bytes left [ 4885.784457] x86_64-pc-linux (24084) used greatest stack depth: 4216 bytes left [ 5368.497747] x86_64-pc-linux (15101) used greatest stack depth: 4120 bytes left [ 5544.942995] brcupsconfig3[18830]: segfault at 62623534 ip 00000000f7653a73 sp 00000000ffb816cc error 6 in libc-2.15.so[f75c4000+1a0000] [ 5682.658302] brcupsconfig3[19057]: segfault at 30653537 ip 00000000f75e4a73 sp 00000000ffe2849c error 6 in libc-2.15.so[f7555000+1a0000] [ 9293.007365] brcupsconfig3[20534]: segfault at 31303635 ip 00000000f75a4a73 sp 00000000ffab061c error 6 in libc-2.15.so[f7515000+1a0000] [ 9368.772330] brcupsconfig3[20723]: segfault at 39616137 ip 00000000f762ca73 sp 00000000ffbb4fdc error 6 in libc-2.15.so[f759d000+1a0000] [11177.688891] brcupsconfig3[2960]: segfault at 38303735 ip 00000000f765ba73 sp 00000000ffa8bb8c error 6 in libc-2.15.so[f75cc000+1a0000] [17263.218430] brcupsconfig3[3728]: segfault at 61313237 ip 00000000f7604a73 sp 00000000ffc7271c error 6 in libc-2.15.so[f7575000+1a0000] [40458.651500] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [40458.651503] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state