[ 0.369778] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100 [ 0.369940] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601 [ 0.369972] pci 0000:00:1f.2: reg 10: [io 0x1860-0x1867] [ 0.369986] pci 0000:00:1f.2: reg 14: [io 0x1814-0x1817] [ 0.370000] pci 0000:00:1f.2: reg 18: [io 0x1818-0x181f] [ 0.370013] pci 0000:00:1f.2: reg 1c: [io 0x1810-0x1813] [ 0.370027] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f] [ 0.370040] pci 0000:00:1f.2: reg 24: [mem 0xf2827000-0xf28277ff] [ 0.370124] pci 0000:00:1f.2: PME# supported from D3hot [ 0.370155] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.370181] pci 0000:00:1f.3: reg 10: [mem 0xf2828800-0xf28288ff 64bit] [ 0.370216] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f] [ 0.370277] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 [ 0.370312] pci 0000:00:1f.6: reg 10: [mem 0xf2626000-0xf2626fff 64bit] [ 0.370501] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.370874] pci 0000:03:00.0: [8086:4239] type 00 class 0x028000 [ 0.371012] pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit] [ 0.371598] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.374232] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.374379] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.374458] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.374601] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.374606] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.374616] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.374759] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500 [ 0.374787] pci 0000:0d:00.0: reg 10: [mem 0xf2500000-0xf25000ff] [ 0.374977] pci 0000:0d:00.0: supports D1 D2 [ 0.374979] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.375040] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000 [ 0.375067] pci 0000:0d:00.1: reg 10: [mem 0xf2500400-0xf25004ff] [ 0.375257] pci 0000:0d:00.1: supports D1 D2 [ 0.375259] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.375319] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010 [ 0.375346] pci 0000:0d:00.3: reg 10: [mem 0xf2500800-0xf2500fff] [ 0.375529] pci 0000:0d:00.3: supports D1 D2 [ 0.375532] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.378187] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.378335] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff] [ 0.378447] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode) [ 0.378606] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.378608] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.378611] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.378613] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.378616] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.378618] pci 0000:00:1e.0: bridge window [mem 0x7c000000-0xfebfffff] (subtractive decode) [ 0.378655] pci_bus 0000:00: on NUMA node 0 [ 0.378659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.378871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.378916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.378964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.379015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.379253] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.379669] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.379900] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.388150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.388391] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.388612] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.388935] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.389176] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.389413] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.389633] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.389959] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.390553] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.390799] vgaarb: loaded [ 0.390930] vgaarb: bridge control possible 0000:00:02.0 [ 0.391328] SCSI subsystem initialized [ 0.391642] libata version 3.00 loaded. [ 0.391863] ACPI: bus type usb registered [ 0.392109] usbcore: registered new interface driver usbfs [ 0.392307] usbcore: registered new interface driver hub [ 0.392517] usbcore: registered new device driver usb [ 0.393005] PCI: Using ACPI for IRQ routing [ 0.403969] PCI: pci_cache_line_size set to 64 bytes [ 0.404267] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.404269] e820: reserve RAM buffer [mem 0x7727c000-0x77ffffff] [ 0.404276] e820: reserve RAM buffer [mem 0x77363000-0x77ffffff] [ 0.404282] e820: reserve RAM buffer [mem 0x7746f000-0x77ffffff] [ 0.404287] e820: reserve RAM buffer [mem 0x77717000-0x77ffffff] [ 0.404291] e820: reserve RAM buffer [mem 0x7776c000-0x77ffffff] [ 0.404295] e820: reserve RAM buffer [mem 0x77800000-0x77ffffff] [ 0.404775] NetLabel: Initializing [ 0.404910] NetLabel: domain hash size = 128 [ 0.405050] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.405225] NetLabel: unlabeled traffic allowed by default [ 0.405478] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.405619] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.407802] Switching to clocksource hpet [ 0.415590] pnp: PnP ACPI init [ 0.415750] ACPI: bus type pnp registered [ 0.417225] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.417228] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.417230] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.417232] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.417234] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.417236] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.417238] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 0.417240] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 0.417242] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 0.417244] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.417246] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.417248] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.417249] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.417251] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.417253] pnp 00:00: [mem 0x00100000-0x7bffffff] [ 0.417255] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.417257] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.417412] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.417559] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.417704] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.417849] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.418018] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.418162] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.418308] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.418453] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.418599] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.418745] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.418890] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.419058] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.419204] system 00:00: [mem 0x00100000-0x7bffffff] could not be reserved [ 0.419351] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.419496] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.419663] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.419683] pnp 00:01: [bus ff] [ 0.419831] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.419855] pnp 00:02: [bus 00-fe] [ 0.419858] pnp 00:02: [io 0x0cf8-0x0cff] [ 0.419860] pnp 00:02: [io 0x0000-0x0cf7 window] [ 0.419862] pnp 00:02: [io 0x0d00-0xffff window] [ 0.419864] pnp 00:02: [mem 0x000a0000-0x000bffff window] [ 0.419866] pnp 00:02: [mem 0x000c0000-0x000c3fff window] [ 0.419868] pnp 00:02: [mem 0x000c4000-0x000c7fff window] [ 0.419870] pnp 00:02: [mem 0x000c8000-0x000cbfff window] [ 0.419872] pnp 00:02: [mem 0x000cc000-0x000cffff window] [ 0.419874] pnp 00:02: [mem 0x000d0000-0x000d3fff window] [ 0.419876] pnp 00:02: [mem 0x000d4000-0x000d7fff window] [ 0.419878] pnp 00:02: [mem 0x000d8000-0x000dbfff window] [ 0.419880] pnp 00:02: [mem 0x000dc000-0x000dffff window] [ 0.419882] pnp 00:02: [mem 0x000e0000-0x000e3fff window] [ 0.419884] pnp 00:02: [mem 0x000e4000-0x000e7fff window] [ 0.419886] pnp 00:02: [mem 0x000e8000-0x000ebfff window] [ 0.419888] pnp 00:02: [mem 0x000ec000-0x000effff window] [ 0.419890] pnp 00:02: [mem 0x7c000000-0xfebfffff window] [ 0.419892] pnp 00:02: [mem 0xfed40000-0xfed4bfff window] [ 0.420051] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.420347] pnp 00:03: [io 0x0010-0x001f] [ 0.420350] pnp 00:03: [io 0x0090-0x009f] [ 0.420352] pnp 00:03: [io 0x0024-0x0025] [ 0.420353] pnp 00:03: [io 0x0028-0x0029] [ 0.420355] pnp 00:03: [io 0x002c-0x002d] [ 0.420357] pnp 00:03: [io 0x0030-0x0031] [ 0.420359] pnp 00:03: [io 0x0034-0x0035] [ 0.420360] pnp 00:03: [io 0x0038-0x0039] [ 0.420362] pnp 00:03: [io 0x003c-0x003d] [ 0.420364] pnp 00:03: [io 0x00a4-0x00a5] [ 0.420366] pnp 00:03: [io 0x00a8-0x00a9] [ 0.420367] pnp 00:03: [io 0x00ac-0x00ad] [ 0.420369] pnp 00:03: [io 0x00b0-0x00b5] [ 0.420371] pnp 00:03: [io 0x00b8-0x00b9] [ 0.420373] pnp 00:03: [io 0x00bc-0x00bd] [ 0.420375] pnp 00:03: [io 0x0050-0x0053] [ 0.420376] pnp 00:03: [io 0x0072-0x0077] [ 0.420378] pnp 00:03: [io 0x164e-0x164f] [ 0.420380] pnp 00:03: [io 0x002e-0x002f] [ 0.420382] pnp 00:03: [io 0x1000-0x107f] [ 0.420384] pnp 00:03: [io 0x1180-0x11ff] [ 0.420385] pnp 00:03: [io 0x0800-0x080f] [ 0.420387] pnp 00:03: [io 0x15e0-0x15ef] [ 0.420389] pnp 00:03: [io 0x1600-0x1641] [ 0.420391] pnp 00:03: [io 0x1644-0x167f] [ 0.420393] pnp 00:03: [mem 0xe0000000-0xefffffff] [ 0.420395] pnp 00:03: [mem 0xfed1c000-0xfed1ffff] [ 0.420397] pnp 00:03: [mem 0xfed10000-0xfed13fff] [ 0.420398] pnp 00:03: [mem 0xfed18000-0xfed18fff] [ 0.420400] pnp 00:03: [mem 0xfed19000-0xfed19fff] [ 0.420402] pnp 00:03: [mem 0xfed45000-0xfed4bfff] [ 0.420558] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.420702] system 00:03: [io 0x1000-0x107f] has been reserved [ 0.420844] system 00:03: [io 0x1180-0x11ff] has been reserved [ 0.421011] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.421154] system 00:03: [io 0x15e0-0x15ef] has been reserved [ 0.421296] system 00:03: [io 0x1600-0x1641] has been reserved [ 0.421438] system 00:03: [io 0x1644-0x167f] could not be reserved [ 0.421583] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved [ 0.421727] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.421873] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.422035] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.422181] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.422326] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.422473] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.422513] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.422620] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.422634] pnp 00:05: [io 0x0000-0x000f] [ 0.422636] pnp 00:05: [io 0x0080-0x008f] [ 0.422638] pnp 00:05: [io 0x00c0-0x00df] [ 0.422640] pnp 00:05: [dma 4] [ 0.422739] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.422751] pnp 00:06: [io 0x0061] [ 0.422851] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.422864] pnp 00:07: [io 0x00f0] [ 0.422878] pnp 00:07: [irq 13] [ 0.422999] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.423012] pnp 00:08: [io 0x0070-0x0071] [ 0.423020] pnp 00:08: [irq 8] [ 0.423122] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.423136] pnp 00:09: [io 0x0060] [ 0.423138] pnp 00:09: [io 0x0064] [ 0.423145] pnp 00:09: [irq 1] [ 0.423249] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.423267] pnp 00:0a: [irq 12] [ 0.423369] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.423685] pnp 00:0b: [mem 0xfed40000-0xfed44fff] [ 0.423792] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.424658] pnp 00:0c: [mem 0xfeaff000-0xfeafffff] [ 0.424826] system 00:0c: [mem 0xfeaff000-0xfeafffff] has been reserved [ 0.424995] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.425010] pnp: PnP ACPI: found 13 devices [ 0.425145] ACPI: ACPI bus type pnp unregistered [ 0.467716] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.467873] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.468029] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.468184] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.468325] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.468473] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.468621] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.468856] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.469015] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff] [ 0.469172] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] [ 0.469387] pci 0000:00:1e.0: setting latency timer to 64 [ 0.469393] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.469395] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.469397] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.469399] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.469402] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.469404] pci_bus 0000:00: resource 9 [mem 0x7c000000-0xfebfffff] [ 0.469406] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff] [ 0.469409] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.469411] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.469413] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.469416] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff] [ 0.469418] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7] [ 0.469420] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff] [ 0.469423] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff] [ 0.469425] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.469427] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.469429] pci_bus 0000:0e: resource 9 [mem 0x7c000000-0xfebfffff] [ 0.469477] NET: Registered protocol family 2 [ 0.469722] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.470115] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.471033] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 0.475285] TCP: Hash tables configured (established 131072 bind 65536) [ 0.475456] TCP: reno registered [ 0.475594] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.475800] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.476133] NET: Registered protocol family 1 [ 0.476519] RPC: Registered named UNIX socket transport module. [ 0.476662] RPC: Registered udp transport module. [ 0.476799] RPC: Registered tcp transport module. [ 0.476948] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.477118] pci 0000:00:02.0: Boot video device [ 0.477144] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.479814] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.480041] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.480186] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.480471] PCI: CLS 64 bytes, default 64 [ 0.480577] Trying to unpack rootfs image as initramfs... [ 0.749244] Freeing initrd memory: 11728k freed [ 0.752482] Simple Boot Flag at 0x35 set to 0x1 [ 0.755122] audit: initializing netlink socket (disabled) [ 0.755294] type=2000 audit(1365754632.567:1): initialized [ 0.789761] highmem bounce pool size: 64 pages [ 0.789905] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.796703] VFS: Disk quotas dquot_6.5.2 [ 0.796967] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.799024] NFS: Registering the id_resolver key type [ 0.799233] Key type id_resolver registered [ 0.799660] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.800245] fuse init (API version 7.19) [ 0.801341] Btrfs loaded [ 0.801478] msgmni has been set to 1709 [ 0.802258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.802520] io scheduler noop registered [ 0.802655] io scheduler deadline registered [ 0.802798] io scheduler cfq registered (default) [ 0.803574] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.804438] ACPI: Requesting acpi_cpufreq [ 0.807898] Monitor-Mwait will be used to enter C-1 state [ 0.807952] Monitor-Mwait will be used to enter C-2 state [ 0.807995] Monitor-Mwait will be used to enter C-3 state [ 0.808055] ACPI: acpi_idle registered with cpuidle [ 0.825408] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.825551] ACPI: Thermal Zone [THM0] (46 C) [ 0.825868] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.848274] 0000:00:16.3: ttyS0 at I/O 0x1808 (irq = 17) is a 16550A [ 0.849040] Non-volatile memory driver v1.3 [ 0.849204] Linux agpgart interface v0.103 [ 0.849767] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 0.849998] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.850984] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.851524] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.855795] brd: module loaded [ 0.856497] Loading iSCSI transport class v2.0-870. [ 0.857682] iscsi: registered transport (tcp) [ 0.858117] Adaptec aacraid driver 1.2-0[28900]-ms [ 0.858717] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.859188] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k. [ 0.859577] iscsi: registered transport (qla4xxx) [ 0.859790] QLogic iSCSI HBA Driver [ 0.859924] Emulex LightPulse Fibre Channel SCSI driver 8.3.31 [ 0.860064] Copyright(c) 2004-2009 Emulex. All rights reserved. [ 0.860550] DC390: clustering now enabled by default. If you get problems load [ 0.860776] with "disable_clustering=1" and report to maintainers [ 0.861068] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.861451] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 0.861755] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) [ 0.861969] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.862290] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.862559] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.862559] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.863225] SCSI Media Changer driver v0.25 [ 0.863509] ahci 0000:00:1f.2: version 3.0 [ 0.863598] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.863666] ahci: SSS flag set, parallel bus scan disabled [ 0.863854] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode [ 0.864085] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems sxs apst [ 0.864335] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.872189] scsi0 : ahci [ 0.872667] scsi1 : ahci [ 0.873006] scsi2 : ahci [ 0.873384] scsi3 : ahci [ 0.873724] scsi4 : ahci [ 0.874062] scsi5 : ahci [ 0.875099] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 40 [ 0.875345] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 40 [ 0.875571] ata3: DUMMY [ 0.875700] ata4: DUMMY [ 0.875831] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 40 [ 0.876058] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 40 [ 0.881478] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012) [ 0.881763] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.72.50-0 (2012/04/23) [ 0.882217] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.882360] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.882580] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.882726] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.882945] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 0.883087] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 0.883276] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.883368] e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.883661] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 1.063184] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:26:2d:f5:57:17 [ 1.063415] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.063672] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF [ 1.063920] igb: Intel(R) Gigabit Ethernet Network Driver - version 3.4.7-k [ 1.064065] igb: Copyright (c) 2007-2012 Intel Corporation. [ 1.064356] usbcore: registered new interface driver zd1201 [ 1.064564] usbcore: registered new interface driver catc [ 1.064769] usbcore: registered new interface driver kaweth [ 1.064929] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 1.065226] usbcore: registered new interface driver pegasus [ 1.065433] usbcore: registered new interface driver rtl8150 [ 1.065646] usbcore: registered new interface driver asix [ 1.065851] usbcore: registered new interface driver cdc_ether [ 1.066079] usbcore: registered new interface driver dm9601 [ 1.066286] usbcore: registered new interface driver gl620a [ 1.066492] usbcore: registered new interface driver net1080 [ 1.066699] usbcore: registered new interface driver plusb [ 1.066913] usbcore: registered new interface driver rndis_host [ 1.067121] usbcore: registered new interface driver cdc_subset [ 1.067327] usbcore: registered new interface driver zaurus [ 1.067536] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.067842] usbcore: registered new interface driver cdc_ncm [ 1.068374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.068540] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.068687] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.068850] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.068869] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.069353] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.069631] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.073663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.073699] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2828000 [ 1.079885] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.080139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.080283] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.080508] usb usb1: Product: EHCI Host Controller [ 1.080646] usb usb1: Manufacturer: Linux 3.5.0-rc4_bisect_e8aeae_20130412_bisect_e8aeae_20130412+ ehci_hcd [ 1.080898] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.081592] hub 1-0:1.0: USB hub found [ 1.081751] hub 1-0:1.0: 3 ports detected [ 1.082145] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.082293] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.082455] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.082460] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.082736] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.083014] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.087043] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.087066] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2828400 [ 1.092856] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.093052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.093198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.093424] usb usb2: Product: EHCI Host Controller [ 1.093562] usb usb2: Manufacturer: Linux 3.5.0-rc4_bisect_e8aeae_20130412_bisect_e8aeae_20130412+ ehci_hcd [ 1.093796] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.094244] hub 2-0:1.0: USB hub found [ 1.094386] hub 2-0:1.0: 3 ports detected [ 1.094751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.094998] uhci_hcd: USB Universal Host Controller Interface driver [ 1.095310] Initializing USB Mass Storage driver... [ 1.095527] usbcore: registered new interface driver usb-storage [ 1.095670] USB Mass Storage support registered. [ 1.096000] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.099551] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.099726] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.100354] mousedev: PS/2 mouse device common for all mice [ 1.100739] rtc_cmos 00:08: RTC can wake from S4 [ 1.101272] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.101452] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.101831] cpuidle: using governor ladder [ 1.102353] cpuidle: using governor menu [ 1.102488] EFI Variables Facility v0.08 2004-May-17 [ 1.104262] usbcore: registered new interface driver usbhid [ 1.104408] usbhid: USB HID core driver [ 1.104645] TCP: cubic registered [ 1.104777] Initializing XFRM netlink socket [ 1.104959] NET: Registered protocol family 17 [ 1.105154] Key type dns_resolver registered [ 1.105403] Using IPI No-Shortcut mode [ 1.105926] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.106012] PM: Hibernation image not present or could not be loaded. [ 1.106039] registered taskstats version 1 [ 1.106975] Magic number: 9:454:270 [ 1.337511] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.341573] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.341581] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.342096] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.342104] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.343662] ata1.00: ATA-8: HITACHI HTS545025B9A300, PB2ZC61H, max UDMA/100 [ 1.343813] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.345484] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.345490] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.346014] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.346020] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.347520] ata1.00: configured for UDMA/100 [ 1.348359] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54502 PB2Z PQ: 0 ANSI: 5 [ 1.350412] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.350734] sd 0:0:0:0: [sda] Write Protect is off [ 1.350890] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.350937] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.350943] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.383425] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.386336] sda: sda1 sda2 [ 1.388250] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.497781] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.497928] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.499378] hub 1-1:1.0: USB hub found [ 1.499583] hub 1-1:1.0: 6 ports detected [ 1.602968] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.717347] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.717486] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.718641] hub 2-1:1.0: USB hub found [ 1.718985] hub 2-1:1.0: 8 ports detected [ 1.752800] Refined TSC clocksource calibration: 2393.999 MHz. [ 1.752956] Switching to clocksource tsc [ 1.782869] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd [ 1.810616] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.816431] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.817342] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.821048] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, MX05, max UDMA/133 [ 1.827449] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.828323] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.832111] ata2.00: configured for UDMA/133 [ 1.837626] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N MX05 PQ: 0 ANSI: 5 [ 1.843493] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.843793] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.844651] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.845177] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.869142] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 [ 1.869283] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.869561] usb 1-1.3: Product: Biometric Coprocessor [ 1.869692] usb 1-1.3: Manufacturer: UPEK [ 1.943620] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd [ 1.946015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000 [ 1.946238] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.995450] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 [ 2.033214] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f [ 2.033403] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.033600] usb 1-1.4: Product: Broadcom Bluetooth Device [ 2.033723] usb 1-1.4: Manufacturer: Broadcom Corp [ 2.033844] usb 1-1.4: SerialNumber: C417FEEFC45F [ 2.108317] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd [ 2.150066] ata5: SATA link down (SStatus 0 SControl 300) [ 2.199122] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f [ 2.199262] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.199457] usb 1-1.6: Product: Integrated Camera [ 2.199579] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 2.454567] ata6: SATA link down (SStatus 0 SControl 300) [ 2.454812] Freeing unused kernel memory: 564k freed [ 2.455667] Write protecting the kernel text: 6780k [ 2.456177] Write protecting the kernel read-only data: 3620k [ 2.528989] dracut: dracut-018-35.git20120510.fc17 [ 2.577375] device-mapper: uevent: version 1.0.3 [ 2.577977] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.587349] udevd[1292]: starting version 182 [ 2.650950] [drm] Initialized drm 1.1.0 20060810 [ 2.652885] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 2.653900] ACPI: Lid Switch [LID] [ 2.654811] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 2.655494] ACPI: Sleep Button [SLPB] [ 2.656720] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.657297] ACPI: Power Button [PWRF] [ 2.662587] i915 0000:00:02.0: power state changed by ACPI to D0 [ 2.662743] i915 0000:00:02.0: power state changed by ACPI to D0 [ 2.665611] i915 0000:00:02.0: setting latency timer to 64 [ 2.666545] [drm:intel_detect_pch], Found Ibex Peak PCH [ 2.669782] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7777f018 [ 2.669813] [drm:intel_opregion_setup], Public ACPI methods supported [ 2.669816] [drm:intel_opregion_setup], SWSCI supported [ 2.669818] [drm:intel_opregion_setup], ASLE supported [ 2.669937] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 2.669959] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.670157] [drm] Driver supports precise vblank timestamp query. [ 2.670296] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 2.670299] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT IRONLAKE-MOBILEd [ 2.670301] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 [ 2.670302] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 2.670306] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 2.670309] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 69300 1280 1328 1360 1404 800 803 809 822 0x8 0xa [ 2.670311] [drm:parse_lfp_panel_data], VBT initial LVDS value 300300 [ 2.670313] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 2.670315] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.670317] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 2.670656] [drm:intel_dsm_pci_probe], failed to get supported _DSM functions [ 2.670669] [drm:i915_setup_compression], FBC base 0x7a000000, ll base 0x00000000, size 28M [ 2.670793] [drm:intel_modeset_init], 2 display pipes available. [ 2.670817] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.709606] [drm:intel_panel_get_backlight], get backlight PWM = 52 [ 2.709613] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437 [ 2.709905] [drm:intel_panel_get_backlight], get backlight PWM = 52 [ 2.710213] [drm:intel_crt_init], pch crt adpa set to 0xf40018 [ 2.718045] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 2.718050] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 2.719125] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 2.719436] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 2.720153] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 2.722695] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.722697] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.725247] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.725249] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.725611] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 2.728154] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.728156] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.730702] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.730704] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.730865] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 3.006628] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 3.006814] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 3.030764] [drm:intel_update_fbc], no output, disabling [ 3.030773] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 3.030780] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 3.030785] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 3.030789] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 3.031232] [drm:intel_update_fbc], no output, disabling [ 3.031239] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0 [ 3.129181] [drm:init_status_page], render ring hws offset: 0x00000000 [ 3.129837] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 3.130419] [drm:ironlake_enable_drps], fmax: 0, fmin: 10, fstart: 8 [ 3.132418] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 3.132460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 3.132484] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 3.132493] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 3.132501] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 50 57700 1280 1328 1360 1404 800 803 809 822 0x40 0xa [ 3.132506] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 3.132512] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40018 [ 3.142314] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 3.142319] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.144373] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.144380] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.144385] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.144390] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 3.144397] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 3.152290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 3.152295] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 3.152301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] [ 3.152618] [drm:intel_dp_detect], DPCD: 1106840000000000 [ 3.154062] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.194510] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.195953] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.236384] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.236480] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 3.236521] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes : [ 3.236529] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 3.236537] [drm:drm_mode_debug_printmodeline], Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 3.236544] [drm:drm_mode_debug_printmodeline], Modeline 69:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 3.236551] [drm:drm_mode_debug_printmodeline], Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 [ 3.236559] [drm:drm_mode_debug_printmodeline], Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 [ 3.236566] [drm:drm_mode_debug_printmodeline], Modeline 62:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.236573] [drm:drm_mode_debug_printmodeline], Modeline 61:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.236580] [drm:drm_mode_debug_printmodeline], Modeline 67:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 [ 3.236587] [drm:drm_mode_debug_printmodeline], Modeline 66:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 3.236595] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 3.236602] [drm:drm_mode_debug_printmodeline], Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 [ 3.236609] [drm:drm_mode_debug_printmodeline], Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 [ 3.236616] [drm:drm_mode_debug_printmodeline], Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 3.236624] [drm:drm_mode_debug_printmodeline], Modeline 55:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 3.236631] [drm:drm_mode_debug_printmodeline], Modeline 57:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9 [ 3.236638] [drm:drm_mode_debug_printmodeline], Modeline 56:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 [ 3.236645] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 3.236653] [drm:drm_mode_debug_printmodeline], Modeline 54:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 3.236660] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 3.236667] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.236674] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 3.236681] [drm:drm_mode_debug_printmodeline], Modeline 50:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 3.236688] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3.236696] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 3.236703] [drm:drm_mode_debug_printmodeline], Modeline 51:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 3.236710] [drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 3.236717] [drm:drm_mode_debug_printmodeline], Modeline 45:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 3.236724] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 3.236731] [drm:drm_mode_debug_printmodeline], Modeline 44:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 3.236738] [drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 3.236743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] [ 3.238138] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.238143] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 3.238148] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected [ 3.238154] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] [ 3.240198] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 3.240205] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 3.240211] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected [ 3.240217] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] [ 3.242767] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.246661] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.250655] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.252097] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.252099] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected [ 3.252102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:28:DP-3] [ 3.254646] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.258642] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.262675] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.264086] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.264091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:28:DP-3] disconnected [ 3.264096] [drm:drm_setup_crtcs], [ 3.264101] [drm:drm_enable_connectors], connector 7 enabled? yes [ 3.264105] [drm:drm_enable_connectors], connector 14 enabled? no [ 3.264110] [drm:drm_enable_connectors], connector 17 enabled? no [ 3.264114] [drm:drm_enable_connectors], connector 20 enabled? yes [ 3.264118] [drm:drm_enable_connectors], connector 23 enabled? no [ 3.264122] [drm:drm_enable_connectors], connector 25 enabled? no [ 3.264126] [drm:drm_enable_connectors], connector 26 enabled? no [ 3.264130] [drm:drm_enable_connectors], connector 28 enabled? no [ 3.264135] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 3.264139] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 3.264143] [drm:drm_target_preferred], found mode 1280x800 [ 3.264148] [drm:drm_target_preferred], looking for cmdline mode on connector 20 [ 3.264152] [drm:drm_target_preferred], looking for preferred mode on connector 20 [ 3.264156] [drm:drm_target_preferred], found mode 1920x1200 [ 3.264160] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 3.264170] [drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 3 [ 3.264179] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 5 [ 3.288306] [drm:intelfb_create], allocated 1920x1200 fb: 0x00043000, bo f50a6100 [ 3.288889] fbcon: inteldrmfb (fb0) is primary device [ 3.291449] [drm:drm_crtc_helper_set_config], [ 3.291454] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 3.291496] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 3.291500] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 3.291506] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.291512] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 3.291516] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 3.291519] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 3.291524] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.291527] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 3.291537] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 3.291543] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 3.291545] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 3.291802] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz [ 3.291829] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 3.291831] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6) [ 3.291834] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 3.291837] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 3.291839] [drm:intel_get_pch_pll], CRTC:3 using pre-allocated PCH PLL c6014 [ 3.291841] [drm:intel_get_pch_pll], using pll 0 for pipe 0 [ 3.291842] [drm:intel_get_pch_pll], switching PLL c6014 off [ 3.343993] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.344043] [drm:ironlake_update_plane], Writing base 00043000 00000000 0 0 7680 [ 3.344048] [drm:intel_update_fbc], fbc set to per-chip default [ 3.344051] [drm:intel_update_fbc], fbc disabled per module param [ 3.344057] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 3.344063] [drm:ironlake_check_srwm], watermark 1: display plane 24, fbc lines 3, cursor 6 [ 3.344067] [drm:ironlake_check_srwm], watermark 2: display plane 76, fbc lines 3, cursor 6 [ 3.344074] [drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:32:1280x800] [ 3.344078] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 3.344083] [drm:ironlake_check_srwm], watermark 1: display plane 24, fbc lines 3, cursor 6 [ 3.344088] [drm:ironlake_check_srwm], watermark 2: display plane 76, fbc lines 3, cursor 6 [ 3.395966] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.447819] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.448129] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x700 [ 3.448130] [drm:ironlake_fdi_link_train], FDI train 1 done. [ 3.448286] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600 [ 3.448287] [drm:ironlake_fdi_link_train], FDI train 2 done. [ 3.448288] [drm:ironlake_fdi_link_train], FDI train done [ 3.448291] [drm:intel_enable_pch_pll], enable PCH PLL c6014 (active 0, on? 0)for crtc 3 [ 3.448293] [drm:intel_enable_pch_pll], enabling PCH PLL c6014 [ 3.449509] [drm:intel_update_fbc], fbc set to per-chip default [ 3.449510] [drm:intel_update_fbc], fbc disabled per module param [ 3.450770] [drm:intel_panel_actually_set_backlight], set backlight PWM = 52 [ 3.450787] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 3.450791] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on [ 3.451035] [drm:drm_crtc_helper_set_config], [ 3.451037] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 3.451041] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 3.451042] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 3.451045] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.451048] [drm:drm_mode_debug_printmodeline], Modeline 33:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 3.451049] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 3.451051] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.451053] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 3.451054] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.451056] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 3.451059] [drm:drm_mode_debug_printmodeline], Modeline 33:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 3.451065] [drm:intel_dp_mode_fixup], DP link computation with max lane count 4 max bw 06 pixel clock 154000KHz [ 3.451067] [drm:intel_dp_mode_fixup], DP link bw 06 lane count 4 clock 162000 bpp 24 [ 3.451069] [drm:intel_dp_mode_fixup], DP link bw required 369600 available 518400 [ 3.451070] [drm:drm_crtc_helper_set_mode], [CRTC:5] [ 3.451310] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10 [ 3.451313] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 3.451317] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 3.451323] [drm:drm_mode_debug_printmodeline], Modeline 33:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 3.451327] [drm:intel_get_pch_pll], CRTC:5 using pre-allocated PCH PLL c6018 [ 3.451330] [drm:intel_get_pch_pll], using pll 1 for pipe 1 [ 3.451333] [drm:intel_get_pch_pll], switching PLL c6018 off [ 3.466228] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 3.502743] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.502752] [drm:ironlake_update_plane], Writing base 00043000 00000000 0 0 7680 [ 3.502756] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 3.502760] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 3.502763] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 3.502769] [drm:drm_crtc_helper_set_mode], [ENCODER:21:TMDS-21] set [MODE:33:1920x1200] [ 3.502774] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 3.502777] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 3.554609] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.606563] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.606874] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100 [ 3.606876] [drm:ironlake_fdi_link_train], FDI train 1 done. [ 3.607031] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600 [ 3.607032] [drm:ironlake_fdi_link_train], FDI train 2 done. [ 3.607033] [drm:ironlake_fdi_link_train], FDI train done [ 3.607035] [drm:intel_enable_pch_pll], enable PCH PLL c6018 (active 0, on? 0)for crtc 5 [ 3.607038] [drm:intel_enable_pch_pll], enabling PCH PLL c6018 [ 3.607283] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 3.608257] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 3.625768] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 3.627115] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00800000 [ 3.628043] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000 [ 3.628900] [drm:intel_dp_start_link_train], clock recovery OK [ 3.634899] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 3.634904] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] set DPMS on [ 3.635068] [drm:drm_crtc_helper_set_config], [ 3.635072] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 3.635082] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.635086] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.635090] [drm:drm_crtc_helper_set_config], [ 3.635095] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 3.635102] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.635106] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.645560] Console: switching to colour frame buffer device 160x50 [ 3.645570] [drm:drm_crtc_helper_set_config], [ 3.645574] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 3.645583] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.645587] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.645592] [drm:drm_crtc_helper_set_config], [ 3.645596] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 3.645603] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.645607] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.658155] fb0: inteldrmfb frame buffer device [ 3.658156] drm: registered panic notifier [ 3.667182] [drm:intel_opregion_gse_intr], non asle set request?? [ 3.667694] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437 [ 3.667700] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4437 [ 3.667705] [drm:intel_opregion_gse_intr], PWM freq is not supported [ 3.669100] [drm:intel_opregion_gse_intr], non asle set request?? [ 3.669575] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437 [ 3.669577] [drm:intel_panel_actually_set_backlight], set backlight PWM = 52 [ 3.669579] [drm:intel_opregion_gse_intr], PWM freq is not supported [ 3.670304] acpi device:02: registered as cooling_device4 [ 3.672861] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.673100] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 3.673684] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.682909] dracut: Starting plymouth daemon [ 3.697519] [drm:drm_crtc_helper_set_config], [ 3.697523] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 3.697537] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.697540] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.697544] [drm:drm_crtc_helper_set_config], [ 3.697547] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 3.697554] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.697557] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.714441] [drm:i915_driver_open], [ 3.714517] [drm:drm_crtc_helper_set_config], [ 3.714519] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 3.714535] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.714537] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.714540] [drm:drm_crtc_helper_set_config], [ 3.714542] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 3.714545] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.714547] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.714564] [drm:i915_driver_open], [ 3.714577] [drm:drm_crtc_helper_set_config], [ 3.714579] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 3.714583] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.714585] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.714587] [drm:drm_crtc_helper_set_config], [ 3.714589] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 3.714592] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.714594] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.714607] [drm:i915_driver_open], [ 3.714724] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8] [ 3.714736] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8] [ 3.714744] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 3.714749] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 3.714765] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 3.714769] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 3.714773] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 50 57700 1280 1328 1360 1404 800 803 809 822 0x40 0xa [ 3.714778] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 3.721561] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 3.721573] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 3.721581] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 3.721585] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.723313] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.723319] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.723323] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.723331] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 3.723342] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 3.723349] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 3.723355] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 3.723359] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.725328] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.725335] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.725339] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.725345] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 3.725366] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 3.725374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 3.733336] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 3.733343] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 3.733352] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 3.733359] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 3.741283] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 3.741289] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 3.741309] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 3.741316] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] [ 3.741638] [drm:intel_dp_detect], DPCD: 1106840000000000 [ 3.743081] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.783677] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.785122] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.825770] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.825867] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 3.825947] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes : [ 3.825955] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 3.825963] [drm:drm_mode_debug_printmodeline], Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 3.825970] [drm:drm_mode_debug_printmodeline], Modeline 69:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 3.825977] [drm:drm_mode_debug_printmodeline], Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 [ 3.825984] [drm:drm_mode_debug_printmodeline], Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 [ 3.825991] [drm:drm_mode_debug_printmodeline], Modeline 62:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.825998] [drm:drm_mode_debug_printmodeline], Modeline 61:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.826005] [drm:drm_mode_debug_printmodeline], Modeline 67:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 [ 3.826013] [drm:drm_mode_debug_printmodeline], Modeline 66:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 3.826020] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 3.826027] [drm:drm_mode_debug_printmodeline], Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 [ 3.826034] [drm:drm_mode_debug_printmodeline], Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 [ 3.826041] [drm:drm_mode_debug_printmodeline], Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 3.826048] [drm:drm_mode_debug_printmodeline], Modeline 55:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 3.826055] [drm:drm_mode_debug_printmodeline], Modeline 57:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9 [ 3.826062] [drm:drm_mode_debug_printmodeline], Modeline 56:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 [ 3.826069] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 3.826076] [drm:drm_mode_debug_printmodeline], Modeline 54:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 3.826084] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 3.826092] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.826099] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 3.826164] [drm:drm_mode_debug_printmodeline], Modeline 50:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 3.826172] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3.826179] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 3.826186] [drm:drm_mode_debug_printmodeline], Modeline 51:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 3.826193] [drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 3.826201] [drm:drm_mode_debug_printmodeline], Modeline 45:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 3.826208] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 3.826215] [drm:drm_mode_debug_printmodeline], Modeline 44:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 3.826222] [drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 3.826233] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 3.843963] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 3.843971] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] [ 3.845095] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.845100] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 3.845108] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected [ 3.845120] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 3.845126] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] [ 3.847124] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.847130] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 3.847136] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected [ 3.847155] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 3.847162] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] [ 3.849166] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 3.849173] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 3.849179] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected [ 3.849192] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 3.849199] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] [ 3.851159] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 3.851166] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 3.851172] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected [ 3.851191] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 3.851200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] [ 3.853759] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.857611] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.861613] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.863054] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.863060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected [ 3.863070] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 3.863077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] [ 3.865623] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.869589] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.873580] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.875033] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.875038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected [ 3.875053] [drm:drm_mode_getconnector], [CONNECTOR:28:?] [ 3.875060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:28:DP-3] [ 3.877607] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.881581] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.885562] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.887015] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.887020] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:28:DP-3] disconnected [ 3.887030] [drm:drm_mode_getconnector], [CONNECTOR:28:?] [ 3.887036] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:28:DP-3] [ 3.889600] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.893549] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.897553] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.898991] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.898997] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:28:DP-3] disconnected [ 3.914377] [drm:drm_crtc_helper_set_config], [ 3.914381] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 3.914395] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.914399] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 3.914402] [drm:drm_crtc_helper_set_config], [ 3.914406] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 3.914413] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.914417] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 4.163834] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 4.178875] [drm:drm_crtc_helper_set_config], [ 4.178877] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 4.178892] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 4.178893] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 4.178895] [drm:drm_crtc_helper_set_config], [ 4.178897] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 4.178900] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 4.178901] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 4.665329] firewire_core 0000:0d:00.3: created device fw0: GUID 00262dfff55717ff, S400 [ 4.687587] kjournald starting. Commit interval 5 seconds [ 4.687939] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 4.847238] dracut: Checking ext3: /dev/disk/by-uuid/07a0ead7-012f-4470-be52-3c0f6540285e [ 4.847486] dracut: issuing e2fsck -a /dev/disk/by-uuid/07a0ead7-012f-4470-be52-3c0f6540285e [ 5.212540] dracut: /dev/disk/by-uuid/07a0ead7-012f-4470-be52-3c0f6540285e: clean, 2734509/15138816 files, 28892108/60537344 blocks [ 5.213158] dracut: Remounting /dev/disk/by-uuid/07a0ead7-012f-4470-be52-3c0f6540285e with -o ro [ 5.325811] kjournald starting. Commit interval 5 seconds [ 5.325968] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 5.404028] dracut: Mounted root filesystem /dev/sda2 [ 5.712466] dracut: Switching root [ 7.095238] NET: Registered protocol family 10 [ 8.059876] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 8.316604] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 [ 10.130027] udevd[2360]: starting version 182 [ 13.668475] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 13.668481] [drm:intel_crt_detect], CRT not detected via hotplug [ 13.670157] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 13.670164] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 13.670169] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 13.670175] [drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2 [ 13.678141] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 13.678148] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2 [ 13.678468] [drm:intel_dp_detect], DPCD: 1106840000000000 [ 13.679909] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 13.720402] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 13.720407] [drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1 [ 13.722062] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 13.722068] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 13.722074] [drm:output_poll_execute], [CONNECTOR:23:HDMI-A-2] status updated from 2 to 2 [ 13.724058] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 13.724063] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 13.724069] [drm:output_poll_execute], [CONNECTOR:25:HDMI-A-3] status updated from 2 to 2 [ 13.726612] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.730586] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.734582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.736032] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.736038] [drm:output_poll_execute], [CONNECTOR:26:DP-2] status updated from 2 to 2 [ 13.738580] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.742560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.746556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.748010] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.748016] [drm:output_poll_execute], [CONNECTOR:28:DP-3] status updated from 2 to 2 [ 15.252337] EXT3-fs (sda2): using internal journal [ 16.504749] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 16.631992] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 16.635961] ACPI: AC Adapter [AC] (on-line) [ 16.638127] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 16.639899] ACPI: Battery Slot [BAT0] (battery absent) [ 16.657742] wmi: Mapper loaded [ 16.672046] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78) [ 16.708949] tpm_tis 00:0b: A TPM error (6) occurred attempting to read a pcr value [ 16.710719] tpm_tis 00:0b: TPM is disabled/deactivated (0x6) [ 16.961724] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9 [ 17.736089] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251) [ 17.737970] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.739878] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 17.741831] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251) [ 17.743893] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.746003] ACPI Warning: 0x00001180-0x000011ff SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120320/utaddress-251) [ 17.748107] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.750320] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 17.772680] microcode: CPU0 updated to revision 0xd, date = 2011-09-01 [ 17.775204] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9 [ 17.778285] microcode: CPU1 updated to revision 0xd, date = 2011-09-01 [ 17.780730] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9 [ 17.783923] microcode: CPU2 updated to revision 0xd, date = 2011-09-01 [ 17.786310] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9 [ 17.789635] microcode: CPU3 updated to revision 0xd, date = 2011-09-01 [ 17.792550] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 18.107588] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 18.109931] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 18.112264] thinkpad_acpi: ThinkPad BIOS 6IET52WW (1.12 ), EC 6IHT30WW-1.04 [ 18.114690] thinkpad_acpi: Lenovo ThinkPad T410, model 25222AU [ 18.118924] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 18.121675] thinkpad_acpi: radio switch found; radios are enabled [ 18.124124] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 18.128903] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 18.135555] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 18.138734] Registered led device: tpacpi::thinklight [ 18.138857] Registered led device: tpacpi::power [ 18.138995] Registered led device: tpacpi::standby [ 18.139515] Registered led device: tpacpi::thinkvantage [ 18.141537] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 18.144520] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 18.148773] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 18.385679] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 18.682448] kvm: disabled by bios [ 19.515903] Linux video capture interface: v2.00 [ 20.057648] hda_codec: CX20585: BIOS auto-probing. [ 20.060391] ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 20.060393] ALSA sound/pci/hda/hda_auto_parser.c:326 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.060395] ALSA sound/pci/hda/hda_auto_parser.c:330 hp_outs=2 (0x19/0x1c/0x0/0x0/0x0) [ 20.060397] ALSA sound/pci/hda/hda_auto_parser.c:331 mono: mono_out=0x0 [ 20.060400] ALSA sound/pci/hda/hda_auto_parser.c:335 inputs: [ 20.060402] ALSA sound/pci/hda/hda_auto_parser.c:339 Dock Mic=0x1a [ 20.060404] ALSA sound/pci/hda/hda_auto_parser.c:339 Mic=0x1b [ 20.060405] ALSA sound/pci/hda/hda_auto_parser.c:339 Internal Mic=0x23 [ 20.060405] ALSA sound/pci/hda/hda_auto_parser.c:341 [ 20.061487] ALSA sound/pci/hda/patch_conexant.c:4550 hda_codec: Enable sync_write for stable communication [ 20.257564] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f) [ 20.261809] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9 [ 20.264673] usbcore: registered new interface driver uvcvideo [ 20.267409] USB Video Class driver (1.1.1) [ 23.630438] Adding 2047996k swap on /dev/sda1. Priority:0 extents:1 across:2047996k [ 28.736267] [drm:drm_crtc_helper_set_config], [ 28.736271] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 28.736282] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.736284] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 28.736287] [drm:drm_crtc_helper_set_config], [ 28.736290] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 28.736294] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 28.736296] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 29.733779] [drm:drm_crtc_helper_set_config], [ 29.733781] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 29.733799] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 29.733801] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 29.733804] [drm:drm_crtc_helper_set_config], [ 29.733806] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 29.733809] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 29.733811] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 30.425470] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 30.449724] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.916699] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 37.349182] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 37.449307] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 37.449708] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready [ 38.230282] Bluetooth: Core ver 2.16 [ 38.230407] NET: Registered protocol family 31 [ 38.230452] Bluetooth: HCI device and connection manager initialized [ 38.230585] Bluetooth: HCI socket layer initialized [ 38.230631] Bluetooth: L2CAP socket layer initialized [ 38.230686] Bluetooth: SCO socket layer initialized [ 38.406858] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.406976] Bluetooth: BNEP filters: protocol multicast [ 39.833748] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx [ 39.833815] e1000e 0000:00:19.0: em1: 10/100 speed: disabling TSO [ 39.834177] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready [ 99.171174] [drm:i915_driver_open], [ 99.171202] [drm:drm_crtc_helper_set_config], [ 99.171205] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 99.171216] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 99.171218] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 99.171221] [drm:drm_crtc_helper_set_config], [ 99.171223] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 99.171226] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 99.171228] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 99.171243] [drm:i915_driver_open], [ 99.171463] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8] [ 99.171472] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8] [ 99.171481] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 99.171486] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 99.171502] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 99.171506] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 99.171509] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 50 57700 1280 1328 1360 1404 800 803 809 822 0x40 0xa [ 99.171513] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 99.418642] [drm:drm_mode_addfb], [FB:35] [ 99.418932] [drm:drm_mode_setcrtc], [CRTC:3] [ 99.418944] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 99.418949] [drm:drm_crtc_helper_set_config], [ 99.418954] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:35] #connectors=1 (x y) (0 0) [ 99.418969] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 99.418974] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 99.418998] [drm:ironlake_update_plane], Writing base 0090D000 00000000 0 0 5120 [ 99.430582] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 99.432280] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.489028] [drm:drm_mode_addfb], [FB:36] [ 104.489160] [drm:drm_mode_setcrtc], [CRTC:3] [ 104.489172] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 104.489177] [drm:drm_crtc_helper_set_config], [ 104.489183] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 104.489195] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 104.489203] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 104.489211] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x800" 50 57700 1280 1328 1360 1404 800 803 809 822 0x40 0xa [ 104.489217] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 104.489223] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 104.489227] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 104.489234] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x800" 50 57700 1280 1328 1360 1404 800 803 809 822 0x40 0xa [ 104.489243] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 104.489249] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 104.768339] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 104.786267] ------------[ cut here ]------------ [ 104.786413] WARNING: at drivers/gpu/drm/i915/intel_display.c:1379 assert_pch_dp_disabled+0x7b/0x86 [i915]() [ 104.786593] Hardware name: 25222AU [ 104.786660] IBX PCH dp port still using transcoder B [ 104.786830] Modules linked in: bnep bluetooth ip6t_REJECT ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_conntrack_ipv6 nf_defrag_ipv4 nf_defrag_ipv6 xt_state nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables snd_hda_codec_hdmi uvcvideo snd_hda_codec_conexant videobuf2_vmalloc videobuf2_memops videobuf2_core videodev coretemp kvm snd_hda_intel snd_hda_codec snd_hwdep snd_pcm thinkpad_acpi snd_page_alloc snd_timer lpc_ich i2c_i801 snd rfkill mfd_core microcode tpm_tis tpm tpm_bios wmi battery ac soundcore pcspkr joydev uinput ipv6 firewire_ohci firewire_core crc_itu_t i915 video button i2c_algo_bit drm_kms_helper drm i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] [ 104.788020] Pid: 3843, comm: testdisplay Not tainted 3.5.0-rc4_bisect_e8aeae_20130412_bisect_e8aeae_20130412+ #27 [ 104.788272] Call Trace: [ 104.788323] [] warn_slowpath_common+0x68/0x7d [ 104.788451] [] ? assert_pch_dp_disabled+0x7b/0x86 [i915] [ 104.788572] [] warn_slowpath_fmt+0x2b/0x2f [ 104.788705] [] assert_pch_dp_disabled+0x7b/0x86 [i915] [ 104.788857] [] ironlake_crtc_disable+0x1d0/0x616 [i915] [ 104.789011] [] ironlake_crtc_prepare+0xd/0xf [i915] [ 104.789212] [] drm_crtc_helper_set_mode+0x1ff/0x383 [drm_kms_helper] [ 104.789397] [] ? number.isra.2+0x130/0x21a [ 104.789493] [] drm_crtc_helper_set_config+0x5ce/0x7fe [drm_kms_helper] [ 104.789642] [] ? trace_hardirqs_on+0xb/0xd [ 104.789769] [] drm_mode_setcrtc+0x32b/0x37d [drm] [ 104.789902] [] ? drm_mode_setplane+0x27c/0x27c [drm] [ 104.790035] [] drm_ioctl+0x27c/0x32c [drm] [ 104.790181] [] ? drm_mode_setplane+0x27c/0x27c [drm] [ 104.790333] [] ? _raw_spin_unlock_irq+0x27/0x2b [ 104.790449] [] ? finish_task_switch+0x6c/0xd9 [ 104.790564] [] ? drm_copy_field+0x54/0x54 [drm] [ 104.790673] [] vfs_ioctl+0x20/0x2a [ 104.790760] [] do_vfs_ioctl+0x429/0x46c [ 104.790855] [] ? __schedule+0x674/0x7aa [ 104.790952] [] ? vfs_write+0xe0/0x12c [ 104.791117] [] sys_ioctl+0x3e/0x5f [ 104.795994] [] sysenter_do_call+0x12/0x32 [ 104.801027] ---[ end trace 23b450c68d0e1741 ]--- [ 104.818994] [drm:intel_disable_pch_pll], disable PCH PLL c6014 (active 1, on? 1) for crtc 3 [ 104.818999] [drm:intel_disable_pch_pll], disabling PCH PLL c6014 [ 104.819412] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 104.819417] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.819424] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.819433] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz [ 104.819484] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 104.819489] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6) [ 104.819494] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 104.819502] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x800" 50 57700 1280 1328 1360 1404 800 803 809 822 0x40 0xa [ 104.819506] [drm:intel_get_pch_pll], CRTC:3 reusing existing PCH PLL c6014 [ 104.819510] [drm:intel_get_pch_pll], switching PLL c6014 off [ 104.870901] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 104.870911] [drm:ironlake_update_plane], Writing base 00CF5000 00000000 0 0 5120 [ 104.922885] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 104.922890] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 104.922896] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 104.922901] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.922907] [drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:37:1280x800] [ 104.922912] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 104.922915] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 104.974794] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 105.026706] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 105.027019] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100 [ 105.027020] [drm:ironlake_fdi_link_train], FDI train 1 done. [ 105.027176] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600 [ 105.027177] [drm:ironlake_fdi_link_train], FDI train 2 done. [ 105.027179] [drm:ironlake_fdi_link_train], FDI train done [ 105.027181] [drm:intel_enable_pch_pll], enable PCH PLL c6014 (active 0, on? 0)for crtc 3 [ 105.027185] [drm:intel_enable_pch_pll], enabling PCH PLL c6014 [ 105.028401] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 105.045076] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 105.045617] [drm:intel_panel_actually_set_backlight], set backlight PWM = 52 [ 105.045634] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 105.045642] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on [ 109.183554] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 109.183558] [drm:intel_crt_detect], CRT not detected via hotplug [ 109.185473] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 109.185478] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 109.185483] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 109.185488] [drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2 [ 109.193456] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 109.193458] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2 [ 109.193773] [drm:intel_dp_detect], DPCD: 1106840000000000 [ 109.195212] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 109.235534] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 109.235538] [drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1 [ 109.237378] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 109.237384] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 109.237390] [drm:output_poll_execute], [CONNECTOR:23:HDMI-A-2] status updated from 2 to 2 [ 109.239377] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 109.239383] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 109.239390] [drm:output_poll_execute], [CONNECTOR:25:HDMI-A-3] status updated from 2 to 2 [ 109.241933] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 109.245948] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 109.249913] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 109.251350] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 109.251356] [drm:output_poll_execute], [CONNECTOR:26:DP-2] status updated from 2 to 2 [ 109.253903] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 109.257895] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 109.261888] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 109.263329] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 109.263335] [drm:output_poll_execute], [CONNECTOR:28:DP-3] status updated from 2 to 2 [ 110.037184] [drm:drm_crtc_helper_set_config], [ 110.037190] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 110.037199] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 110.313611] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 110.313626] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 110.316341] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 110.333751] ------------[ cut here ]------------ [ 110.338688] WARNING: at drivers/gpu/drm/i915/intel_display.c:1379 assert_pch_dp_disabled+0x7b/0x86 [i915]() [ 110.343707] Hardware name: 25222AU [ 110.348479] IBX PCH dp port still using transcoder B [ 110.353713] Modules linked in: bnep bluetooth ip6t_REJECT ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_conntrack_ipv6 nf_defrag_ipv4 nf_defrag_ipv6 xt_state nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables snd_hda_codec_hdmi uvcvideo snd_hda_codec_conexant videobuf2_vmalloc videobuf2_memops videobuf2_core videodev coretemp kvm snd_hda_intel snd_hda_codec snd_hwdep snd_pcm thinkpad_acpi snd_page_alloc snd_timer lpc_ich i2c_i801 snd rfkill mfd_core microcode tpm_tis tpm tpm_bios wmi battery ac soundcore pcspkr joydev uinput ipv6 firewire_ohci firewire_core crc_itu_t i915 video button i2c_algo_bit drm_kms_helper drm i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] [ 110.381092] Pid: 3843, comm: testdisplay Tainted: G W 3.5.0-rc4_bisect_e8aeae_20130412_bisect_e8aeae_20130412+ #27 [ 110.386990] Call Trace: [ 110.392494] [] warn_slowpath_common+0x68/0x7d [ 110.398265] [] ? assert_pch_dp_disabled+0x7b/0x86 [i915] [ 110.404215] [] warn_slowpath_fmt+0x2b/0x2f [ 110.408979] [] assert_pch_dp_disabled+0x7b/0x86 [i915] [ 110.414720] [] ironlake_crtc_disable+0x1d0/0x616 [i915] [ 110.419879] [] ironlake_crtc_dpms+0x6e/0x76 [i915] [ 110.425195] [] intel_crtc_dpms+0x3b/0xe1 [i915] [ 110.431014] [] intel_crtc_disable+0x22/0x79 [i915] [ 110.436472] [] drm_helper_disable_unused_functions+0xb8/0xdc [drm_kms_helper] [ 110.441789] [] drm_crtc_helper_set_config+0x13a/0x7fe [drm_kms_helper] [ 110.446939] [] ? mark_held_locks+0xa0/0xc3 [ 110.449723] [] ? mark_held_locks+0xa0/0xc3 [ 110.454543] [] drm_framebuffer_cleanup+0x4f/0xec [drm] [ 110.459311] [] intel_user_framebuffer_destroy+0x12/0x4d [i915] [ 110.464001] [] drm_mode_rmfb+0x96/0xb5 [drm] [ 110.468784] [] ? drm_mode_addfb2+0x486/0x486 [drm] [ 110.473095] [] drm_ioctl+0x27c/0x32c [drm] [ 110.477737] [] ? drm_mode_addfb2+0x486/0x486 [drm] [ 110.482366] [] ? lock_hrtimer_base.isra.15+0x1c/0x36 [ 110.487040] [] ? _raw_spin_unlock_irqrestore+0x38/0x3e [ 110.491893] [] ? trace_hardirqs_on_caller+0x100/0x151 [ 110.496601] [] ? trace_hardirqs_on+0xb/0xd [ 110.500656] [] ? hrtimer_try_to_cancel+0x91/0x9b [ 110.504914] [] ? hrtimer_cancel+0x12/0x1d [ 110.509604] [] ? drm_copy_field+0x54/0x54 [drm] [ 110.513795] [] vfs_ioctl+0x20/0x2a [ 110.518124] [] do_vfs_ioctl+0x429/0x46c [ 110.522620] [] ? hrtimer_nanosleep+0x6e/0xcd [ 110.526932] [] ? update_rmtp+0x67/0x67 [ 110.531393] [] sys_ioctl+0x3e/0x5f [ 110.535412] [] sysenter_do_call+0x12/0x32 [ 110.539994] ---[ end trace 23b450c68d0e1742 ]--- [ 110.550174] [drm:intel_disable_pch_pll], disable PCH PLL c6014 (active 1, on? 1) for crtc 3 [ 110.550177] [drm:intel_disable_pch_pll], disabling PCH PLL c6014 [ 110.550588] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 110.550592] [drm:ironlake_check_srwm], watermark 1: display plane 51, fbc lines 3, cursor 6 [ 110.550595] [drm:ironlake_check_srwm], watermark 2: display plane 166, fbc lines 4, cursor 10 [ 110.550599] [drm:intel_update_fbc], fbc set to per-chip default [ 110.550600] [drm:intel_update_fbc], fbc disabled per module param [ 110.550622] [drm:drm_mode_setcrtc], [CRTC:3] [ 110.550624] [drm:drm_mode_setcrtc], Count connectors is 1 but no mode or fb set [ 110.550640] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 110.550644] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 110.550648] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 110.550650] [drm:intel_crt_detect], CRT not detected via hotplug [ 110.552114] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 110.552120] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 110.552125] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 110.552133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 110.552144] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 110.552151] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 110.552157] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 110.552161] [drm:intel_crt_detect], CRT not detected via hotplug [ 110.554107] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 110.554112] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 110.554115] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 110.554120] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 110.554135] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 110.554141] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 110.562143] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 110.562149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 110.562157] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 110.562163] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 110.570124] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 110.570130] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 110.570142] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 110.570150] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] [ 110.570472] [drm:intel_dp_detect], DPCD: 1106840000000000 [ 110.571915] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 110.612417] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 110.613865] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 110.654373] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 110.654535] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 110.654603] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes : [ 110.654608] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 110.654611] [drm:drm_mode_debug_printmodeline], Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 110.654615] [drm:drm_mode_debug_printmodeline], Modeline 69:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 110.654618] [drm:drm_mode_debug_printmodeline], Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 [ 110.654622] [drm:drm_mode_debug_printmodeline], Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 [ 110.654625] [drm:drm_mode_debug_printmodeline], Modeline 62:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 110.654628] [drm:drm_mode_debug_printmodeline], Modeline 61:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 110.654632] [drm:drm_mode_debug_printmodeline], Modeline 67:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 [ 110.654635] [drm:drm_mode_debug_printmodeline], Modeline 66:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 110.654639] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 110.654642] [drm:drm_mode_debug_printmodeline], Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 [ 110.654645] [drm:drm_mode_debug_printmodeline], Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 [ 110.654649] [drm:drm_mode_debug_printmodeline], Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 110.654652] [drm:drm_mode_debug_printmodeline], Modeline 55:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 110.654655] [drm:drm_mode_debug_printmodeline], Modeline 57:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9 [ 110.654659] [drm:drm_mode_debug_printmodeline], Modeline 56:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 [ 110.654662] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 110.654665] [drm:drm_mode_debug_printmodeline], Modeline 54:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 110.654668] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 110.654672] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 110.654675] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 110.654678] [drm:drm_mode_debug_printmodeline], Modeline 50:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 110.654681] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 110.654685] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 110.654688] [drm:drm_mode_debug_printmodeline], Modeline 51:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 110.654691] [drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 110.654694] [drm:drm_mode_debug_printmodeline], Modeline 45:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 110.654697] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 110.654701] [drm:drm_mode_debug_printmodeline], Modeline 44:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 110.654704] [drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 110.654715] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 110.830894] [drm:drm_mode_addfb], [FB:36] [ 110.831012] [drm:drm_mode_setcrtc], [CRTC:3] [ 110.831024] [drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1] [ 110.831029] [drm:drm_crtc_helper_set_config], [ 110.831034] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 110.831046] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 110.831051] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 110.831061] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x800" 50 57700 1280 1328 1360 1404 800 803 809 822 0x40 0xa [ 110.831069] [drm:drm_mode_debug_printmodeline], Modeline 37:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 110.831074] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 110.831079] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:3] [ 110.831084] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 110.831091] [drm:drm_mode_debug_printmodeline], Modeline 37:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 110.831100] [drm:intel_dp_mode_fixup], DP link computation with max lane count 4 max bw 06 pixel clock 154000KHz [ 110.831105] [drm:intel_dp_mode_fixup], DP link bw 06 lane count 4 clock 162000 bpp 24 [ 110.831110] [drm:intel_dp_mode_fixup], DP link bw required 369600 available 518400 [ 110.831117] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 110.831330] [drm:intel_dp_link_down], [ 110.900517] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 110.901654] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 110.901691] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10 [ 110.901694] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 110.901696] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 110.901700] [drm:drm_mode_debug_printmodeline], Modeline 37:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 110.901702] [drm:intel_get_pch_pll], CRTC:3 using pre-allocated PCH PLL c6014 [ 110.901704] [drm:intel_get_pch_pll], using pll 0 for pipe 0 [ 110.901706] [drm:intel_get_pch_pll], switching PLL c6014 off [ 110.953482] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 110.953495] [drm:ironlake_update_plane], Writing base 010DD000 00000000 0 0 7680 [ 110.953502] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 110.953509] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6 [ 110.953517] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 110.953526] [drm:drm_crtc_helper_set_mode], [ENCODER:21:TMDS-21] set [MODE:37:1920x1200] [ 110.953530] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6 [ 110.953533] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 111.005397] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 111.057239] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 111.057623] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100 [ 111.057628] [drm:ironlake_fdi_link_train], FDI train 1 done. [ 111.057785] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600 [ 111.057787] [drm:ironlake_fdi_link_train], FDI train 2 done. [ 111.057789] [drm:ironlake_fdi_link_train], FDI train done [ 111.057792] [drm:intel_enable_pch_pll], enable PCH PLL c6014 (active 0, on? 0)for crtc 3 [ 111.057795] [drm:intel_enable_pch_pll], enabling PCH PLL c6014 [ 111.059012] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 111.074891] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 111.075426] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 111.076252] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00800000 [ 111.077076] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000 [ 111.077909] [drm:intel_dp_start_link_train], clock recovery OK [ 111.083732] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 111.083735] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] set DPMS on [ 111.083738] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 111.083768] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 111.083774] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 111.090496] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 111.123199] [drm:intel_disable_pch_pll], disable PCH PLL c6018 (active 1, on? 1) for crtc 5 [ 111.123203] [drm:intel_disable_pch_pll], disabling PCH PLL c6018 [ 111.123614] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6 [ 111.123618] [drm:ironlake_check_srwm], watermark 1: display plane 51, fbc lines 3, cursor 6 [ 111.123620] [drm:ironlake_check_srwm], watermark 2: display plane 166, fbc lines 4, cursor 10 [ 111.123623] [drm:intel_update_fbc], fbc set to per-chip default [ 111.123625] [drm:intel_update_fbc], fbc disabled per module param [ 111.123643] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 111.124732] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 111.124737] [drm:intel_crt_detect], CRT not detected via hotplug [ 111.126126] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 111.126132] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 111.126138] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 111.126144] [drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2 [ 111.134127] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 111.134134] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2 [ 111.134452] [drm:intel_dp_detect], DPCD: 1106840000000000 [ 111.135898] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 111.176438] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 111.176447] [drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1 [ 111.178042] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 111.178049] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 111.178056] [drm:output_poll_execute], [CONNECTOR:23:HDMI-A-2] status updated from 2 to 2 [ 111.181094] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 111.181100] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 111.181105] [drm:output_poll_execute], [CONNECTOR:25:HDMI-A-3] status updated from 2 to 2 [ 111.183674] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 111.187570] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 111.191570] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 111.193002] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 111.193008] [drm:output_poll_execute], [CONNECTOR:26:DP-2] status updated from 2 to 2 [ 111.195560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 111.199536] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 111.203529] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 111.204981] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 111.204987] [drm:output_poll_execute], [CONNECTOR:28:DP-3] status updated from 2 to 2 [ 114.060440] [drm:drm_crtc_helper_set_config], [ 114.060442] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 114.060446] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 114.060672] [drm:intel_dp_link_down], [ 114.079071] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 114.079112] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 114.094016] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 114.127031] [drm:intel_disable_pch_pll], disable PCH PLL c6014 (active 1, on? 1) for crtc 3 [ 114.127037] [drm:intel_disable_pch_pll], disabling PCH PLL c6014 [ 114.127450] [drm:intel_update_fbc], no output, disabling [ 114.137211] [drm:drm_crtc_helper_set_config], [ 114.137214] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 114.137220] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 114.137222] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 114.137226] [drm:drm_mode_debug_printmodeline], Modeline 37:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 114.137229] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 114.137231] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 114.137233] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 114.137236] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 114.137238] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 114.137241] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 114.137249] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 114.137251] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 114.137490] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz [ 114.137514] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 114.137516] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6) [ 114.137520] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 114.137522] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x800" 60 69300 1280 1328 1360 1404 800 803 809 822 0x48 0xa [ 114.137525] [drm:intel_get_pch_pll], CRTC:3 using pre-allocated PCH PLL c6014 [ 114.137527] [drm:intel_get_pch_pll], using pll 0 for pipe 0 [ 114.137528] [drm:intel_get_pch_pll], switching PLL c6014 off [ 114.188871] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 114.188883] [drm:ironlake_update_plane], Writing base 00043000 00000000 0 0 7680 [ 114.188888] [drm:intel_update_fbc], fbc set to per-chip default [ 114.188892] [drm:intel_update_fbc], fbc disabled per module param [ 114.188898] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 114.188905] [drm:ironlake_check_srwm], watermark 1: display plane 24, fbc lines 3, cursor 6 [ 114.188911] [drm:ironlake_check_srwm], watermark 2: display plane 76, fbc lines 3, cursor 6 [ 114.188918] [drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:32:1280x800] [ 114.188924] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 114.188930] [drm:ironlake_check_srwm], watermark 1: display plane 24, fbc lines 3, cursor 6 [ 114.188936] [drm:ironlake_check_srwm], watermark 2: display plane 76, fbc lines 3, cursor 6 [ 114.240818] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 114.292729] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 114.293041] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100 [ 114.293043] [drm:ironlake_fdi_link_train], FDI train 1 done. [ 114.293198] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600 [ 114.293200] [drm:ironlake_fdi_link_train], FDI train 2 done. [ 114.293202] [drm:ironlake_fdi_link_train], FDI train done [ 114.293204] [drm:intel_enable_pch_pll], enable PCH PLL c6014 (active 0, on? 0)for crtc 3 [ 114.293207] [drm:intel_enable_pch_pll], enabling PCH PLL c6014 [ 114.294423] [drm:intel_update_fbc], fbc set to per-chip default [ 114.294425] [drm:intel_update_fbc], fbc disabled per module param [ 114.295654] [drm:intel_panel_actually_set_backlight], set backlight PWM = 52 [ 114.295694] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 114.295699] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on [ 114.295934] [drm:drm_crtc_helper_set_config], [ 114.295936] [drm:drm_crtc_helper_set_config], [CRTC:5] [FB:34] #connectors=1 (x y) (0 0) [ 114.295940] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 114.295942] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 114.295944] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 114.295945] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 114.295948] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5] [ 114.295949] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 114.295953] [drm:drm_mode_debug_printmodeline], Modeline 33:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 114.295957] [drm:intel_dp_mode_fixup], DP link computation with max lane count 4 max bw 06 pixel clock 154000KHz [ 114.295960] [drm:intel_dp_mode_fixup], DP link bw 06 lane count 4 clock 162000 bpp 24 [ 114.295962] [drm:intel_dp_mode_fixup], DP link bw required 369600 available 518400 [ 114.295963] [drm:drm_crtc_helper_set_mode], [CRTC:5] [ 114.296195] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10 [ 114.296197] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 114.296199] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 114.296202] [drm:drm_mode_debug_printmodeline], Modeline 33:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 114.296204] [drm:intel_get_pch_pll], CRTC:5 using pre-allocated PCH PLL c6018 [ 114.296206] [drm:intel_get_pch_pll], using pll 1 for pipe 1 [ 114.296208] [drm:intel_get_pch_pll], switching PLL c6018 off [ 114.311133] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 114.347634] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 114.347644] [drm:ironlake_update_plane], Writing base 00043000 00000000 0 0 7680 [ 114.347649] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 114.347654] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 114.347658] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 114.347664] [drm:drm_crtc_helper_set_mode], [ENCODER:21:TMDS-21] set [MODE:33:1920x1200] [ 114.347671] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 114.347675] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 114.399545] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 114.451456] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 114.451769] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100 [ 114.451771] [drm:ironlake_fdi_link_train], FDI train 1 done. [ 114.451926] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600 [ 114.451928] [drm:ironlake_fdi_link_train], FDI train 2 done. [ 114.451929] [drm:ironlake_fdi_link_train], FDI train done [ 114.451932] [drm:intel_enable_pch_pll], enable PCH PLL c6018 (active 0, on? 0)for crtc 5 [ 114.451935] [drm:intel_enable_pch_pll], enabling PCH PLL c6018 [ 114.453151] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 114.469030] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 114.469572] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 [ 114.470397] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00800000 [ 114.471221] [drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000 [ 114.472046] [drm:intel_dp_start_link_train], clock recovery OK [ 114.477979] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 114.477981] [drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] set DPMS on