[ 18.910] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 [ 18.910] _XSERVTransOpen: transport open failed for inet6/bellona.site:0 [ 18.910] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 [ 18.910] X.Org X Server 1.14.1 Release Date: 2013-04-17 [ 18.910] X Protocol Version 11, Revision 0 [ 18.910] Build Operating System: openSUSE SUSE LINUX [ 18.910] Current Operating System: Linux bellona.site 3.10.0-rc2-next-20130523_64+ #1803 SMP Sat May 25 10:23:11 CEST 2013 x86_64 [ 18.910] Kernel command line: root=/dev/md2 ro reboot=a,w debug ipv6.disable=1 [ 18.910] Build Date: 18 April 2013 01:56:09PM [ 18.910] [ 18.910] Current version of pixman: 0.30.0 [ 18.910] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.910] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.910] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 25 10:28:09 2013 [ 18.910] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 18.910] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.911] (==) No Layout section. Using the first Screen section. [ 18.911] (==) No screen section available. Using defaults. [ 18.911] (**) |-->Screen "Default Screen Section" (0) [ 18.911] (**) | |-->Monitor "" [ 18.911] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 18.911] (==) Automatically adding devices [ 18.911] (==) Automatically enabling devices [ 18.911] (==) Automatically adding GPU devices [ 18.911] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 18.911] Entry deleted from font path. [ 18.911] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/ghostscript/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 18.911] (**) ModulePath set to "/opt/ddxd/lib64/xorg/modules/drivers,/usr/lib64/xorg/modules" [ 18.911] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.911] (II) Loader magic: 0x802c20 [ 18.911] (II) Module ABI versions: [ 18.911] X.Org ANSI C Emulation: 0.4 [ 18.911] X.Org Video Driver: 14.1 [ 18.911] X.Org XInput driver : 19.1 [ 18.911] X.Org Server Extension : 7.0 [ 18.911] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.913] (--) PCI:*(0:0:2:0) 8086:29c2:8086:29c2 rev 2, Mem @ 0xfeb80000/524288, 0xd0000000/268435456, 0xfea00000/1048576, I/O @ 0x0000ec00/8 [ 18.913] Initializing built-in extension Generic Event Extension [ 18.913] Initializing built-in extension SHAPE [ 18.913] Initializing built-in extension MIT-SHM [ 18.913] Initializing built-in extension XInputExtension [ 18.913] Initializing built-in extension XTEST [ 18.913] Initializing built-in extension BIG-REQUESTS [ 18.913] Initializing built-in extension SYNC [ 18.913] Initializing built-in extension XKEYBOARD [ 18.913] Initializing built-in extension XC-MISC [ 18.913] Initializing built-in extension SECURITY [ 18.913] Initializing built-in extension XINERAMA [ 18.913] Initializing built-in extension XFIXES [ 18.913] Initializing built-in extension RENDER [ 18.913] Initializing built-in extension RANDR [ 18.913] Initializing built-in extension COMPOSITE [ 18.913] Initializing built-in extension DAMAGE [ 18.913] Initializing built-in extension MIT-SCREEN-SAVER [ 18.913] Initializing built-in extension DOUBLE-BUFFER [ 18.913] Initializing built-in extension RECORD [ 18.913] Initializing built-in extension DPMS [ 18.913] Initializing built-in extension X-Resource [ 18.913] Initializing built-in extension XVideo [ 18.913] Initializing built-in extension XVideo-MotionCompensation [ 18.913] Initializing built-in extension XFree86-VidModeExtension [ 18.913] Initializing built-in extension XFree86-DGA [ 18.913] Initializing built-in extension XFree86-DRI [ 18.913] Initializing built-in extension DRI2 [ 18.913] (II) "glx" will be loaded by default. [ 18.913] (II) LoadModule: "dri2" [ 18.913] (II) Module "dri2" already built-in [ 18.913] (II) LoadModule: "glamoregl" [ 18.932] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [ 18.933] (II) Module glamoregl: vendor="X.Org Foundation" [ 18.933] compiled for 1.14.1, module version = 0.5.0 [ 18.933] ABI class: X.Org ANSI C Emulation, version 0.4 [ 18.933] (II) LoadModule: "glx" [ 18.933] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 18.933] (II) Module glx: vendor="X.Org Foundation" [ 18.933] compiled for 1.14.1, module version = 1.0.0 [ 18.933] ABI class: X.Org Server Extension, version 7.0 [ 18.933] (==) AIGLX enabled [ 18.934] Loading extension GLX [ 18.934] (==) Matched intel as autoconfigured driver 0 [ 18.934] (==) Matched intel as autoconfigured driver 1 [ 18.934] (==) Matched modesetting as autoconfigured driver 2 [ 18.934] (==) Matched fbdev as autoconfigured driver 3 [ 18.934] (==) Matched vesa as autoconfigured driver 4 [ 18.934] (==) Assigned the driver to the xf86ConfigLayout [ 18.934] (II) LoadModule: "intel" [ 18.934] (II) Loading /opt/ddxd/lib64/xorg/modules/drivers/intel_drv.so [ 19.127] (II) Module intel: vendor="X.Org Foundation" [ 19.127] compiled for 1.14.1, module version = 2.21.7 [ 19.127] Module class: X.Org Video Driver [ 19.127] ABI class: X.Org Video Driver, version 14.1 [ 19.127] (II) LoadModule: "modesetting" [ 19.127] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [ 19.127] (II) Module modesetting: vendor="X.Org Foundation" [ 19.127] compiled for 1.14.0, module version = 0.7.0 [ 19.127] Module class: X.Org Video Driver [ 19.127] ABI class: X.Org Video Driver, version 14.1 [ 19.127] (II) LoadModule: "fbdev" [ 19.127] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 19.127] (II) Module fbdev: vendor="X.Org Foundation" [ 19.127] compiled for 1.14.0, module version = 0.4.3 [ 19.127] Module class: X.Org Video Driver [ 19.127] ABI class: X.Org Video Driver, version 14.1 [ 19.127] (II) LoadModule: "vesa" [ 19.128] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 19.128] (II) Module vesa: vendor="X.Org Foundation" [ 19.128] compiled for 1.14.0, module version = 2.3.2 [ 19.128] Module class: X.Org Video Driver [ 19.128] ABI class: X.Org Video Driver, version 14.1 [ 19.128] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT3), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT3), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT3), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT3), Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3), Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT3), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT3), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT3), Haswell ULT (GT1), Haswell ULT (GT2), Haswell ULT (GT3), Haswell ULT (GT1), Haswell ULT (GT2), Haswell ULT (GT3), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT3), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT3), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT3), Haswell CRW (GT1), Haswell CRW (GT2), Haswell CRW (GT3), Haswell CRW (GT1), Haswell CRW (GT2), Haswell CRW (GT3), ValleyView PO board [ 19.128] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 19.128] (II) FBDEV: driver for framebuffer: fbdev [ 19.128] (II) VESA: driver for VESA chipsets: vesa [ 19.128] (++) using VT number 7 [ 19.139] (II) intel(0): SNA compiled from 2.21.7-15-gfce4292 [ 19.139] (II) intel(0): SNA compiled with assertions enabled [ 19.169] (WW) Falling back to old probe method for modesetting [ 19.169] (WW) Falling back to old probe method for fbdev [ 19.169] (II) Loading sub module "fbdevhw" [ 19.170] (II) LoadModule: "fbdevhw" [ 19.170] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 19.170] (II) Module fbdevhw: vendor="X.Org Foundation" [ 19.170] compiled for 1.14.1, module version = 0.0.2 [ 19.170] ABI class: X.Org Video Driver, version 14.1 [ 19.170] (WW) Falling back to old probe method for vesa [ 19.170] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 19.170] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 19.170] (==) intel(0): RGB weight 888 [ 19.170] (==) intel(0): Default visual is TrueColor [ 19.170] (--) intel(0): Integrated Graphics Chipset: Intel(R) G33 [ 19.170] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3 [ 19.170] (**) intel(0): Framebuffer tiled [ 19.170] (**) intel(0): Pixmaps tiled [ 19.170] (**) intel(0): "Tear free" disabled [ 19.170] (**) intel(0): Forcing per-crtc-pixmaps? no [ 19.276] (II) intel(0): Output VGA1 has no monitor section [ 19.376] (II) intel(0): EDID for output VGA1 [ 19.376] (II) intel(0): Manufacturer: DEL Model: 4071 Serial#: 1110923340 [ 19.376] (II) intel(0): Year: 2011 Week: 40 [ 19.376] (II) intel(0): EDID Version: 1.3 [ 19.376] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 19.376] (II) intel(0): Sync: Separate Composite SyncOnGreen [ 19.376] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29 [ 19.376] (II) intel(0): Gamma: 2.20 [ 19.376] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 19.376] (II) intel(0): First detailed timing is preferred mode [ 19.376] (II) intel(0): redX: 0.638 redY: 0.330 greenX: 0.312 greenY: 0.623 [ 19.376] (II) intel(0): blueX: 0.150 blueY: 0.068 whiteX: 0.313 whiteY: 0.329 [ 19.376] (II) intel(0): Supported established timings: [ 19.376] (II) intel(0): 720x400@70Hz [ 19.376] (II) intel(0): 640x480@60Hz [ 19.376] (II) intel(0): 640x480@75Hz [ 19.376] (II) intel(0): 800x600@60Hz [ 19.376] (II) intel(0): 800x600@75Hz [ 19.376] (II) intel(0): 1024x768@60Hz [ 19.376] (II) intel(0): 1024x768@75Hz [ 19.376] (II) intel(0): 1280x1024@75Hz [ 19.376] (II) intel(0): Manufacturer's mask: 0 [ 19.376] (II) intel(0): Supported standard timings: [ 19.376] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 19.376] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 19.376] (II) intel(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 19.376] (II) intel(0): Supported detailed timing: [ 19.376] (II) intel(0): clock: 148.5 MHz Image Size: 510 x 287 mm [ 19.376] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 19.376] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 19.376] (II) intel(0): Serial No: 59DJP1A7B7XL [ 19.376] (II) intel(0): Monitor name: DELL U2312HM [ 19.376] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz [ 19.376] (II) intel(0): EDID (in hex): [ 19.376] (II) intel(0): 00ffffffffffff0010ac71404c583742 [ 19.376] (II) intel(0): 281501030e331d78ea6ea5a3544f9f26 [ 19.376] (II) intel(0): 115054a54b00714f8180d1c001010101 [ 19.376] (II) intel(0): 010101010101023a801871382d40582c [ 19.376] (II) intel(0): 4500fe1f1100001e000000ff00353944 [ 19.376] (II) intel(0): 4a503141374237584c0a000000fc0044 [ 19.376] (II) intel(0): 454c4c205532333132484d0a000000fd [ 19.376] (II) intel(0): 00384c1e5311000a202020202020007c [ 19.376] (II) intel(0): Printing probed modes for output VGA1 [ 19.376] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 19.376] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 19.376] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 19.376] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 19.376] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 19.376] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 19.376] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 19.376] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 19.376] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 19.376] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 19.376] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 19.376] (II) intel(0): Output VGA1 connected [ 19.376] (II) intel(0): Using exact sizes for initial modes [ 19.376] (II) intel(0): Output VGA1 using initial mode 1920x1080 [ 19.376] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 19.376] (==) intel(0): DPI set to (96, 96) [ 19.376] (II) Loading sub module "dri2" [ 19.376] (II) LoadModule: "dri2" [ 19.376] (II) Module "dri2" already built-in [ 19.376] (II) UnloadModule: "modesetting" [ 19.376] (II) Unloading modesetting [ 19.376] (II) UnloadModule: "fbdev" [ 19.376] (II) Unloading fbdev [ 19.376] (II) UnloadSubModule: "fbdevhw" [ 19.376] (II) Unloading fbdevhw [ 19.376] (II) UnloadModule: "vesa" [ 19.376] (II) Unloading vesa [ 19.376] (==) Depth 24 pixmap format is 32 bpp [ 19.377] (II) intel(0): SNA initialized with gen3 backend [ 19.377] (==) intel(0): Backing store disabled [ 19.377] (==) intel(0): Silken mouse enabled [ 19.377] (II) intel(0): HW Cursor enabled [ 19.377] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 19.377] (==) intel(0): DPMS enabled [ 19.378] (II) intel(0): [XvMC] i915_xvmc driver initialized. [ 19.378] (II) intel(0): [DRI2] Setup complete [ 19.378] (II) intel(0): [DRI2] DRI driver: i915 [ 19.378] (II) intel(0): direct rendering: DRI2 Enabled [ 19.378] (==) intel(0): hotplug detection: "enabled" [ 19.378] (--) RandR disabled [ 19.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 19.388] (II) AIGLX: enabled GLX_INTEL_swap_event [ 19.388] (II) AIGLX: enabled GLX_ARB_create_context [ 19.388] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 19.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 19.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 19.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 19.388] (II) AIGLX: Loaded and initialized i915 [ 19.388] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 19.389] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0) [ 19.424] (II) intel(0): Setting screen physical size to 508 x 285 [ 19.586] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 19.586] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 19.586] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 19.586] (**) Power Button: Applying InputClass "LocalKeyboard" [ 19.586] (II) LoadModule: "evdev" [ 19.586] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 19.586] (II) Module evdev: vendor="X.Org Foundation" [ 19.586] compiled for 1.14.0, module version = 2.8.0 [ 19.586] Module class: X.Org XInput Driver [ 19.586] ABI class: X.Org XInput driver, version 19.1 [ 19.586] (II) Using input driver 'evdev' for 'Power Button' [ 19.586] (**) Power Button: always reports core events [ 19.586] (**) evdev: Power Button: Device: "/dev/input/event1" [ 19.586] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 19.586] (--) evdev: Power Button: Found keys [ 19.586] (II) evdev: Power Button: Configuring as keyboard [ 19.586] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 19.586] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 19.586] (**) Option "xkb_rules" "evdev" [ 19.586] (**) Option "xkb_model" "evdev" [ 19.586] (**) Option "xkb_layout" "us" [ 19.606] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 19.606] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 19.606] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 19.606] (**) Power Button: Applying InputClass "LocalKeyboard" [ 19.606] (II) Using input driver 'evdev' for 'Power Button' [ 19.606] (**) Power Button: always reports core events [ 19.606] (**) evdev: Power Button: Device: "/dev/input/event0" [ 19.606] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 19.606] (--) evdev: Power Button: Found keys [ 19.606] (II) evdev: Power Button: Configuring as keyboard [ 19.606] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" [ 19.606] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 19.606] (**) Option "xkb_rules" "evdev" [ 19.606] (**) Option "xkb_model" "evdev" [ 19.606] (**) Option "xkb_layout" "us" [ 19.606] (II) config/udev: Adding drm device (/dev/dri/card0) [ 19.606] (II) config/udev: Adding input device Microsoft Corporation Microsoft ® Laser Mouse 6000 (/dev/input/event2) [ 19.606] (**) Microsoft Corporation Microsoft ® Laser Mouse 6000: Applying InputClass "evdev pointer catchall" [ 19.606] (**) Microsoft Corporation Microsoft ® Laser Mouse 6000: Applying InputClass "evdev pointer catchall" [ 19.606] (II) Using input driver 'evdev' for 'Microsoft Corporation Microsoft ® Laser Mouse 6000' [ 19.606] (**) Microsoft Corporation Microsoft ® Laser Mouse 6000: always reports core events [ 19.606] (**) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: Device: "/dev/input/event2" [ 19.606] (--) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: Vendor 0x45e Product 0xf0 [ 19.606] (--) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: Found 9 mouse buttons [ 19.606] (--) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: Found scroll wheel(s) [ 19.606] (--) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: Found relative axes [ 19.606] (--) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: Found x and y relative axes [ 19.606] (II) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: Configuring as mouse [ 19.606] (II) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: Adding scrollwheel support [ 19.606] (**) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: YAxisMapping: buttons 4 and 5 [ 19.606] (**) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 19.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input2/event2" [ 19.607] (II) XINPUT: Adding extended input device "Microsoft Corporation Microsoft ® Laser Mouse 6000" (type: MOUSE, id 8) [ 19.607] (II) evdev: Microsoft Corporation Microsoft ® Laser Mouse 6000: initialized for relative axes. [ 19.607] (**) Microsoft Corporation Microsoft ® Laser Mouse 6000: (accel) keeping acceleration scheme 1 [ 19.607] (**) Microsoft Corporation Microsoft ® Laser Mouse 6000: (accel) acceleration profile 0 [ 19.607] (**) Microsoft Corporation Microsoft ® Laser Mouse 6000: (accel) acceleration factor: 2.000 [ 19.607] (**) Microsoft Corporation Microsoft ® Laser Mouse 6000: (accel) acceleration threshold: 4 [ 19.607] (II) config/udev: Adding input device Microsoft Corporation Microsoft ® Laser Mouse 6000 (/dev/input/mouse0) [ 19.607] (II) No input driver specified, ignoring this device. [ 19.607] (II) This device may have been added with another device file. [ 19.607] (II) config/udev: Adding input device IR-receiver inside an USB DVB receiver (/dev/input/event5) [ 19.607] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall" [ 19.607] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall" [ 19.607] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "LocalKeyboard" [ 19.607] (II) Using input driver 'evdev' for 'IR-receiver inside an USB DVB receiver' [ 19.607] (**) IR-receiver inside an USB DVB receiver: always reports core events [ 19.607] (**) evdev: IR-receiver inside an USB DVB receiver: Device: "/dev/input/event5" [ 19.607] (--) evdev: IR-receiver inside an USB DVB receiver: Vendor 0x2040 Product 0x5200 [ 19.607] (--) evdev: IR-receiver inside an USB DVB receiver: Found keys [ 19.607] (II) evdev: IR-receiver inside an USB DVB receiver: Configuring as keyboard [ 19.607] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/rc/rc0/input5/event5" [ 19.607] (II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD, id 9) [ 19.607] (**) Option "xkb_rules" "evdev" [ 19.607] (**) Option "xkb_model" "evdev" [ 19.607] (**) Option "xkb_layout" "us" [ 19.608] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event3) [ 19.608] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" [ 19.608] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" [ 19.608] (**) Genius Multimedia Keyboard: Applying InputClass "LocalKeyboard" [ 19.608] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard' [ 19.608] (**) Genius Multimedia Keyboard: always reports core events [ 19.608] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event3" [ 19.608] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708 [ 19.608] (--) evdev: Genius Multimedia Keyboard: Found keys [ 19.608] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard [ 19.608] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.1/2-3.1:1.0/input/input3/event3" [ 19.608] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 10) [ 19.608] (**) Option "xkb_rules" "evdev" [ 19.608] (**) Option "xkb_model" "evdev" [ 19.608] (**) Option "xkb_layout" "us" [ 19.608] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event4) [ 19.608] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" [ 19.608] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" [ 19.608] (**) Genius Multimedia Keyboard: Applying InputClass "LocalKeyboard" [ 19.608] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard' [ 19.608] (**) Genius Multimedia Keyboard: always reports core events [ 19.608] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event4" [ 19.608] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708 [ 19.608] (--) evdev: Genius Multimedia Keyboard: Found keys [ 19.608] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard [ 19.608] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.1/2-3.1:1.1/input/input4/event4" [ 19.608] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 11) [ 19.608] (**) Option "xkb_rules" "evdev" [ 19.608] (**) Option "xkb_model" "evdev" [ 19.608] (**) Option "xkb_layout" "us" [ 31.612] (II) intel(0): EDID vendor "DEL", prod id 16497 [ 31.612] (II) intel(0): Using EDID range info for horizontal sync [ 31.612] (II) intel(0): Using EDID range info for vertical refresh [ 31.612] (II) intel(0): Printing DDC gathered Modelines: [ 31.612] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 31.612] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 31.612] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 31.612] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 31.612] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 31.612] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 31.612] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 31.612] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 31.612] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 31.612] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 31.612] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 31.612] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 40.700] (II) intel(0): EDID vendor "DEL", prod id 16497 [ 40.700] (II) intel(0): Using hsync ranges from config file [ 40.700] (II) intel(0): Using vrefresh ranges from config file [ 40.700] (II) intel(0): Printing DDC gathered Modelines: [ 40.700] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 40.700] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 40.700] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 40.700] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 40.700] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 40.700] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 40.700] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 40.700] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 40.700] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 40.700] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 40.700] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 40.700] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 1174.660] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0) [ 1474.689] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0) [ 9772.031] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)