[ 4.391393] initcall pci_mmcfg_late_insert_resources+0x0/0x46 returned 0 after 6 usecs [ 4.391395] calling tcp_congestion_default+0x0/0xc @ 1 [ 4.391403] initcall tcp_congestion_default+0x0/0xc returned 0 after 5 usecs [ 4.391404] calling tcp_fastopen_init+0x0/0x25 @ 1 [ 4.391418] initcall tcp_fastopen_init+0x0/0x25 returned 0 after 10 usecs [ 4.391420] calling initialize_hashrnd+0x0/0x16 @ 1 [ 4.391426] initcall initialize_hashrnd+0x0/0x16 returned 0 after 2 usecs [ 4.391440] async_waiting @ 1 [ 4.423706] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.492264] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.493475] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133 [ 4.493478] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.503461] ata1.00: configured for UDMA/133 [ 4.503471] async_waiting @ 6 [ 4.503475] async_continuing @ 6 after 0 usec [ 4.503586] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5 [ 4.503916] calling 7_sd_probe_async+0x0/0x1ac @ 1044 [ 4.503937] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 4.503961] sd 0:0:0:0: [sda] Write Protect is off [ 4.503963] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.503973] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.504142] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.504252] initcall 1_async_port_probe+0x0/0x44 returned 0 after 309136 usecs [ 4.504270] async_continuing @ 40 after 309122 usec [ 4.504553] sda: sda1 sda2 [ 4.505021] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.505032] initcall 7_sd_probe_async+0x0/0x1ac returned 0 after 1079 usecs [ 4.671448] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.748502] tsc: Refined TSC clocksource calibration: 2394.455 MHz [ 4.748507] Switching to clocksource tsc [ 4.785870] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 4.785874] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.786541] hub 1-1:1.0: USB hub found [ 4.786744] hub 1-1:1.0: 6 ports detected [ 4.809535] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.810237] ata2.00: ATAPI: Optiarc BD ROM BC-5550H, 1.00, max UDMA/100 [ 4.830314] ata2.00: configured for UDMA/100 [ 4.840007] async_waiting @ 40 [ 4.840021] async_continuing @ 40 after 9 usec [ 4.860122] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5550H 1.00 PQ: 0 ANSI: 5 [ 4.889535] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.890465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.890467] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.890981] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.891399] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.891546] initcall 2_async_port_probe+0x0/0x44 returned 0 after 687004 usecs [ 4.891569] async_continuing @ 1040 after 687014 usec [ 4.891593] async_waiting @ 1040 [ 4.891595] async_continuing @ 1040 after 0 usec [ 4.891599] initcall 3_async_port_probe+0x0/0x44 returned 0 after 687045 usecs [ 4.891635] async_continuing @ 1041 after 687049 usec [ 4.891659] async_waiting @ 1041 [ 4.891660] async_continuing @ 1041 after 0 usec [ 4.891664] initcall 4_async_port_probe+0x0/0x44 returned 0 after 687087 usecs [ 4.891681] async_continuing @ 1042 after 687081 usec [ 5.004050] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 5.004054] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.004513] hub 2-1:1.0: USB hub found [ 5.004632] hub 2-1:1.0: 8 ports detected [ 5.158820] usb 3-5: new low-speed USB device number 2 using xhci_hcd [ 5.178391] usb 3-5: New USB device found, idVendor=03f0, idProduct=0325 [ 5.178395] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.178397] usb 3-5: Product: HP Basic USB Keyboard [ 5.178398] usb 3-5: Manufacturer: Lite-On Technology Corp. [ 5.178655] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5.182732] input: Lite-On Technology Corp. HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input1 [ 5.183135] hid-generic 0003:03F0:0325.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. HP Basic USB Keyboard] on usb-0000:00:14.0-5/input0 [ 5.196853] ata5: SATA link down (SStatus 0 SControl 300) [ 5.196874] async_waiting @ 1042 [ 5.196877] async_continuing @ 1042 after 0 usec [ 5.196883] initcall 5_async_port_probe+0x0/0x44 returned 0 after 984889 usecs [ 5.196919] async_continuing @ 1043 after 984903 usec [ 5.197007] async_waiting @ 1043 [ 5.197010] async_continuing @ 1043 after 0 usec [ 5.197025] initcall 6_async_port_probe+0x0/0x44 returned 0 after 984995 usecs [ 5.197056] async_continuing @ 1 after 786091 usec [ 5.197133] Freeing unused kernel memory: 864k freed [ 5.227584] dracut: dracut-018-35.git20120510.fc17 [ 5.244781] dracut: rd.luks=0: removing cryptoluks activation [ 5.249341] calling dm_init+0x0/0x43 [dm_mod] @ 1285 [ 5.249433] device-mapper: uevent: version 1.0.3 [ 5.249597] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 5.249602] initcall dm_init+0x0/0x43 [dm_mod] returned 0 after 248 usecs [ 5.250541] calling dm_dirty_log_init+0x0/0x4f [dm_log] @ 1290 [ 5.250545] initcall dm_dirty_log_init+0x0/0x4f [dm_log] returned 0 after 0 usecs [ 5.250903] calling dm_mirror_init+0x0/0x29 [dm_mirror] @ 1290 [ 5.250906] initcall dm_mirror_init+0x0/0x29 [dm_mirror] returned 0 after 0 usecs [ 5.253395] udevd[1296]: starting version 182 [ 5.266061] calling drm_core_init+0x0/0x126 [drm] @ 1304 [ 5.266119] [drm] Initialized drm 1.1.0 20060810 [ 5.266127] initcall drm_core_init+0x0/0x126 [drm] returned 0 after 55 usecs [ 5.266514] calling acpi_button_driver_init+0x0/0xc [button] @ 1304 [ 5.266609] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 5.266878] ACPI: Lid Switch [LID0] [ 5.266974] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 5.267027] ACPI: Power Button [PWRB] [ 5.267092] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 5.267153] ACPI: Power Button [PWRF] [ 5.267198] initcall acpi_button_driver_init+0x0/0xc [button] returned 0 after 661 usecs [ 5.267502] calling acpi_video_init+0x0/0x8b [video] @ 1304 [ 5.267515] initcall acpi_video_init+0x0/0x8b [video] returned 0 after 8 usecs [ 5.269032] calling i915_init+0x0/0x66 [i915] @ 1304 [ 5.269453] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0d26 flags=is_mobile,need_gfx_hws,is_haswell,has_force_wake,has_fbc,has_hotplug,has_bsd_ring,has_blt_ring,has_vebox_ring,has_llc,has_ddi,has_fpga_dbg, [ 5.269745] [drm] Memory usable by graphics device = 2048M [ 5.269747] [drm:i915_gem_gtt_init], GMADR size = 256M [ 5.269749] [drm:i915_gem_gtt_init], GTT stolen size = 32M [ 5.269751] checking generic (b0000000 7f0000) vs hw (b0000000 10000000) [ 5.269752] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 5.269763] Console: switching to colour dummy device 80x25 [ 5.269879] i915 0000:00:02.0: setting latency timer to 64 [ 5.286442] [drm:intel_detect_pch], Found LynxPoint PCH [ 5.286723] [drm:intel_opregion_setup], graphic opregion physical addr: 0xa2fc1018 [ 5.286730] [drm:intel_opregion_setup], Public ACPI methods supported [ 5.286731] [drm:intel_opregion_setup], SWSCI supported [ 5.286732] [drm:intel_opregion_setup], ASLE supported [ 5.286763] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 5.286770] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.286771] [drm] Driver supports precise vblank timestamp query. [ 5.286772] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 5.286774] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL d [ 5.286776] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 5.286778] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 5.286781] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 5.286782] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 5.286785] [drm:parse_lfp_panel_data], VBT initial LVDS value 300 [ 5.286787] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 5.286788] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 5.286790] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 5.286884] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at ada00000 [ 5.286919] [drm:intel_modeset_init], 3 display pipes available. [ 5.286929] [drm:intel_ddi_pll_init], CDCLK running at 540000KHz [ 5.286931] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation [ 5.286934] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.287340] [drm:intel_dp_init_connector], Adding eDP connector on port A [ 5.287398] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 6000 [ 5.287399] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 5.287401] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 5.287402] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 5.287404] [drm:intel_dp_i2c_init], i2c_init DPDDC-A [ 5.287405] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on [ 5.287412] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on [ 5.289864] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145010e [ 5.289871] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 5.292302] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145010e [ 5.292306] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 5.292353] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1 [ 5.292355] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on [ 5.292357] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on [ 5.294860] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145010e [ 5.299317] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145010e [ 5.303318] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145010e [ 5.304845] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1 [ 5.304847] [drm] failed to retrieve link info, disabling eDP [ 5.304898] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 5.355964] [drm:intel_dp_init_connector], Adding DP connector on port B [ 5.356045] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 5.356236] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 5.356422] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 5.356512] [drm:intel_dp_init_connector], Adding DP connector on port C [ 5.356564] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 5.359437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 5.359442] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 5.362312] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 5.362316] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 5.431972] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000] [ 5.433533] [drm:init_status_page], render ring hws offset: 0x00000000 [ 5.433614] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 5.433620] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 5.433661] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 5.433703] [drm:init_status_page], video enhancement ring hws offset: 0x00064000 [ 5.433755] [drm:create_default_context], Default HW context loaded [ 5.433756] [drm:i915_gem_context_init], HW context support initialized [ 5.433770] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode [ 5.433778] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode [ 5.433786] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode [ 5.433794] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode [ 5.433802] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode [ 5.433837] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: enabled [ 5.433841] [drm:intel_modeset_setup_hw_state], [CRTC:5] hw state readout: enabled [ 5.433842] [drm:intel_modeset_setup_hw_state], [CRTC:7] hw state readout: disabled [ 5.433844] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port B using clock 0x20000000 [ 5.433846] [drm:intel_ddi_get_crtc_pll], Pipe B connected to port C using clock 0xa0000000 [ 5.433848] [drm:intel_modeset_setup_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0 [ 5.433851] [drm:intel_modeset_setup_hw_state], [ENCODER:11:TMDS-11] hw state readout: enabled, pipe=0 [ 5.433853] [drm:intel_modeset_setup_hw_state], [ENCODER:16:TMDS-16] hw state readout: enabled, pipe=1 [ 5.433855] [drm:intel_modeset_setup_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled [ 5.433857] [drm:intel_modeset_setup_hw_state], [CONNECTOR:12:DP-1] hw state readout: enabled [ 5.433859] [drm:intel_modeset_setup_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled [ 5.433861] [drm:intel_modeset_setup_hw_state], [CONNECTOR:17:DP-2] hw state readout: disabled [ 5.433863] [drm:intel_modeset_setup_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: enabled [ 5.433865] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 5.433866] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 5.433867] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 5.433868] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.433870] [drm:intel_dump_pipe_config], requested mode: [ 5.433871] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 5.433873] [drm:intel_dump_pipe_config], adjusted mode: [ 5.433874] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 5.433876] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.433878] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x07800438 [ 5.433879] [drm:intel_dump_pipe_config], ips: 0 [ 5.433881] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 5.433882] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 5.433883] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 5.433884] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.433886] [drm:intel_dump_pipe_config], requested mode: [ 5.433887] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 5.433889] [drm:intel_dump_pipe_config], adjusted mode: [ 5.433890] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 5.433891] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.433893] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x07800438 [ 5.433894] [drm:intel_dump_pipe_config], ips: 0 [ 5.433896] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C [ 5.433897] [drm:intel_dump_pipe_config], cpu_transcoder: C [ 5.433898] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 5.433899] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.433900] [drm:intel_dump_pipe_config], requested mode: [ 5.433901] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.433903] [drm:intel_dump_pipe_config], adjusted mode: [ 5.433904] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.433906] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.433907] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 5.433909] [drm:intel_dump_pipe_config], ips: 0 [ 5.433911] [drm:intel_connector_check_state], [CONNECTOR:12:DP-1] [ 5.433914] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-2] [ 5.433915] [drm:intel_modeset_check_state], [ENCODER:10:DAC-10] [ 5.433917] [drm:intel_modeset_check_state], [ENCODER:11:TMDS-11] [ 5.433919] [drm:intel_modeset_check_state], [ENCODER:16:TMDS-16] [ 5.433920] [drm:intel_modeset_check_state], [CRTC:3] [ 5.433924] [drm:intel_modeset_check_state], [CRTC:5] [ 5.433927] [drm:intel_modeset_check_state], [CRTC:7] [ 5.433937] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 5.433949] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 5.433952] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 5.443983] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 5.443986] [drm:intel_crt_detect], CRT not detected via hotplug [ 5.444175] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 5.444179] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 5.444181] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.444182] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.444685] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 5.444687] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.444688] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 5.444690] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 5.444692] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] [ 5.445226] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 5.445651] [drm:intel_dp_probe_oui], Sink OUI: 4ce000 [ 5.446076] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 5.446996] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 5.472893] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 5.498738] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 5.498740] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 5.499660] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 5.525520] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 5.551384] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 5.551406] [drm:drm_edid_to_eld], ELD monitor VE228 [ 5.551407] [drm:drm_edid_to_eld], ELD size 7, SAD count 1 [ 5.551430] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] probed modes : [ 5.551433] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.551436] [drm:drm_mode_debug_printmodeline], Modeline 56:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 5.551440] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1110 0x40 0x9 [ 5.551443] [drm:drm_mode_debug_printmodeline], Modeline 55:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 5.551447] [drm:drm_mode_debug_printmodeline], Modeline 47:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 5.551450] [drm:drm_mode_debug_printmodeline], Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 5.551453] [drm:drm_mode_debug_printmodeline], Modeline 31:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 5.551456] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.551460] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.551463] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 5.551466] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 5.551470] [drm:drm_mode_debug_printmodeline], Modeline 22:"1366x768" 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5 [ 5.551473] [drm:drm_mode_debug_printmodeline], Modeline 26:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 5.551476] [drm:drm_mode_debug_printmodeline], Modeline 54:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 5.551479] [drm:drm_mode_debug_printmodeline], Modeline 48:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 5.551483] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 5.551486] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 5.551489] [drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.551492] [drm:drm_mode_debug_printmodeline], Modeline 43:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 5.551495] [drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 5.551499] [drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 5.551502] [drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.551505] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 5.551508] [drm:drm_mode_debug_printmodeline], Modeline 53:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 5.551511] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 5.551515] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 5.551518] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 5.551521] [drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 5.551524] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 5.551527] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.551531] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 5.551534] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 5.551701] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 5.551703] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 5.551705] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 5.551707] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 5.554633] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 5.558963] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 5.562962] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 5.564055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 5.564057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 5.589484] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 5.614919] [drm:drm_edid_to_eld], ELD monitor VE228 [ 5.614921] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 5.614924] [drm:drm_edid_to_eld], ELD size 7, SAD count 1 [ 5.614945] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] probed modes : [ 5.614947] [drm:drm_mode_debug_printmodeline], Modeline 78:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.614951] [drm:drm_mode_debug_printmodeline], Modeline 88:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 5.614954] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1110 0x40 0x9 [ 5.614958] [drm:drm_mode_debug_printmodeline], Modeline 87:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 5.614961] [drm:drm_mode_debug_printmodeline], Modeline 79:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 5.614964] [drm:drm_mode_debug_printmodeline], Modeline 62:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 5.614968] [drm:drm_mode_debug_printmodeline], Modeline 63:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 5.614971] [drm:drm_mode_debug_printmodeline], Modeline 71:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.614974] [drm:drm_mode_debug_printmodeline], Modeline 59:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.614977] [drm:drm_mode_debug_printmodeline], Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 5.614981] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 5.614984] [drm:drm_mode_debug_printmodeline], Modeline 25:"1366x768" 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5 [ 5.614987] [drm:drm_mode_debug_printmodeline], Modeline 58:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 5.614990] [drm:drm_mode_debug_printmodeline], Modeline 86:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 5.614994] [drm:drm_mode_debug_printmodeline], Modeline 80:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 5.614997] [drm:drm_mode_debug_printmodeline], Modeline 72:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 5.615000] [drm:drm_mode_debug_printmodeline], Modeline 73:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 5.615003] [drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.615006] [drm:drm_mode_debug_printmodeline], Modeline 75:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 5.615010] [drm:drm_mode_debug_printmodeline], Modeline 77:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 5.615013] [drm:drm_mode_debug_printmodeline], Modeline 76:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 5.615016] [drm:drm_mode_debug_printmodeline], Modeline 64:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.615019] [drm:drm_mode_debug_printmodeline], Modeline 65:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 5.615023] [drm:drm_mode_debug_printmodeline], Modeline 85:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 5.615026] [drm:drm_mode_debug_printmodeline], Modeline 82:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 5.615029] [drm:drm_mode_debug_printmodeline], Modeline 67:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 5.615032] [drm:drm_mode_debug_printmodeline], Modeline 66:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 5.615035] [drm:drm_mode_debug_printmodeline], Modeline 68:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 5.615039] [drm:drm_mode_debug_printmodeline], Modeline 69:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 5.615042] [drm:drm_mode_debug_printmodeline], Modeline 83:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.615045] [drm:drm_mode_debug_printmodeline], Modeline 70:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 5.615048] [drm:drm_setup_crtcs], [ 5.615050] [drm:drm_enable_connectors], connector 9 enabled? no [ 5.615052] [drm:drm_enable_connectors], connector 12 enabled? yes [ 5.615054] [drm:drm_enable_connectors], connector 15 enabled? no [ 5.615055] [drm:drm_enable_connectors], connector 17 enabled? no [ 5.615057] [drm:drm_enable_connectors], connector 18 enabled? yes [ 5.615059] [drm:drm_target_preferred], looking for cmdline mode on connector 12 [ 5.615061] [drm:drm_target_preferred], looking for preferred mode on connector 12 [ 5.615062] [drm:drm_target_preferred], found mode 1920x1080 [ 5.615064] [drm:drm_target_preferred], looking for cmdline mode on connector 18 [ 5.615066] [drm:drm_target_preferred], looking for preferred mode on connector 18 [ 5.615067] [drm:drm_target_preferred], found mode 1920x1080 [ 5.615069] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 5.615073] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [ 5.615075] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5 [ 5.615077] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000 [ 5.615080] [drm:i915_pages_create_for_stolen], offset=0x0, size=8294400 [ 5.616703] [drm:intelfb_create], allocated 1920x1080 fb: 0x00094000, bo ffff880145942f00 [ 5.616785] fbcon: inteldrmfb (fb0) is primary device [ 5.616843] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 5.616844] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 5.616845] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 5.616847] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.616849] [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.616850] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 5.616852] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 5.616853] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 5.616855] [drm:connected_sink_compute_bpp], [CONNECTOR:12:DP-1] checking for sink bpp constrains [ 5.616856] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 148500KHz [ 5.616859] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24 [ 5.616859] [drm:intel_dp_compute_config], DP link bw required 356400 available 518400 [ 5.616861] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 5.616862] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 5.616863] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 5.616863] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 5.616865] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.616866] [drm:intel_dump_pipe_config], requested mode: [ 5.616867] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.616868] [drm:intel_dump_pipe_config], adjusted mode: [ 5.616870] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.616871] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.616872] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 5.616873] [drm:intel_dump_pipe_config], ips: 0 [ 5.638143] [drm:intel_update_fbc], no output, disabling [ 5.638158] [drm:ironlake_update_plane], Writing base 00094000 00000000 0 0 7680 [ 5.638160] [drm:intel_update_fbc], no output, disabling [ 5.638164] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1920x1080] [ 5.638165] [drm:intel_ddi_mode_set], Preparing DDI mode on port B, pipe A [ 5.638166] [drm:intel_ddi_mode_set], DP audio on pipe A on DDI [ 5.638167] [drm:intel_ddi_mode_set], DP audio: write eld information [ 5.638169] [drm:intel_write_eld], ELD on [CONNECTOR:12:DP-1], [ENCODER:11:TMDS-11] [ 5.638169] [drm:haswell_write_eld], HDMI: Haswell Audio initialize.... [ 5.638170] [drm:haswell_write_eld], HDMI audio: enable codec [ 5.690175] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 5.690177] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x 4 [ 5.690178] [drm:haswell_write_eld], HDMI audio: eld vld status=0x 5 [ 5.690179] [drm:haswell_write_eld], HDMI audio: audio conf: 0x 70fa60 [ 5.690180] [drm:haswell_write_eld], ELD on pipe A [ 5.690181] [drm:haswell_write_eld], ELD: DisplayPort detected [ 5.690184] [drm:haswell_write_eld], port num:0 [ 5.690185] [drm:haswell_write_eld], ELD size 7 [ 5.691782] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 5.693876] [drm:intel_dp_start_link_train], clock recovery OK [ 5.693877] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 5.698165] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 5.742199] [drm:intel_update_fbc], fbc set to per-chip default [ 5.742200] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 5.758214] [drm:intel_connector_check_state], [CONNECTOR:12:DP-1] [ 5.758217] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-2] [ 5.758219] [drm:intel_modeset_check_state], [ENCODER:10:DAC-10] [ 5.758221] [drm:intel_modeset_check_state], [ENCODER:11:TMDS-11] [ 5.758222] [drm:intel_modeset_check_state], [ENCODER:16:TMDS-16] [ 5.758224] [drm:intel_modeset_check_state], [CRTC:3] [ 5.758227] [drm:intel_modeset_check_state], [CRTC:5] [ 5.758230] [drm:intel_modeset_check_state], [CRTC:7] [ 5.758233] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 5.758234] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 5.758235] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 5.758238] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.758241] [drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.758244] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 5.758245] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 5.758247] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 5.758249] [drm:connected_sink_compute_bpp], [CONNECTOR:18:HDMI-A-2] checking for sink bpp constrains [ 5.758251] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output [ 5.758252] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI [ 5.758254] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 5.758255] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B [ 5.758256] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 5.758257] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 5.758259] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.758260] [drm:intel_dump_pipe_config], requested mode: [ 5.758263] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.758264] [drm:intel_dump_pipe_config], adjusted mode: [ 5.758266] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.758268] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.758269] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 5.758270] [drm:intel_dump_pipe_config], ips: 0 [ 5.792246] [drm:intel_update_fbc], fbc set to per-chip default [ 5.792247] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 5.792250] [drm:intel_ddi_put_crtc_pll], Disabling WRPLL 2 [ 5.792251] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B [ 5.794185] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20 [ 5.794217] [drm:ironlake_update_plane], Writing base 00094000 00000000 0 0 7680 [ 5.794219] [drm:intel_update_fbc], fbc set to per-chip default [ 5.794220] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 5.794225] [drm:intel_crtc_mode_set], [ENCODER:16:TMDS-16] set [MODE:0:1920x1080] [ 5.794226] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B [ 5.794227] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI [ 5.794228] [drm:intel_ddi_mode_set], HDMI audio: write eld information [ 5.794230] [drm:intel_write_eld], ELD on [CONNECTOR:18:HDMI-A-2], [ENCODER:16:TMDS-16] [ 5.794231] [drm:haswell_write_eld], HDMI: Haswell Audio initialize.... [ 5.794232] [drm:haswell_write_eld], HDMI audio: enable codec [ 5.845282] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 5.845283] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x 45 [ 5.845284] [drm:haswell_write_eld], HDMI audio: eld vld status=0x 55 [ 5.845286] [drm:haswell_write_eld], HDMI audio: audio conf: 0x 70fa60 [ 5.845287] [drm:haswell_write_eld], ELD on pipe B [ 5.845290] [drm:haswell_write_eld], port num:0 [ 5.845291] [drm:haswell_write_eld], ELD size 7 [ 5.897324] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 5.949366] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 5.949367] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 5.967383] [drm:intel_connector_check_state], [CONNECTOR:12:DP-1] [ 5.967386] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-2] [ 5.967388] [drm:intel_modeset_check_state], [ENCODER:10:DAC-10] [ 5.967390] [drm:intel_modeset_check_state], [ENCODER:11:TMDS-11] [ 5.967392] [drm:intel_modeset_check_state], [ENCODER:16:TMDS-16] [ 5.967393] [drm:intel_modeset_check_state], [CRTC:3] [ 5.967396] [drm:intel_modeset_check_state], [CRTC:5] [ 5.967399] [drm:intel_modeset_check_state], [CRTC:7] [ 5.967402] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 5.967404] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 5.967406] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 5.967410] Console: switching to colour frame buffer device 240x67 [ 5.967417] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 5.967419] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 5.967420] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 5.967422] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 5.967424] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 5.967425] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 5.976524] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.976526] i915 0000:00:02.0: registered panic notifier [ 5.976827] i915 0000:00:02.0: More than 8 outputs detected via ACPI [ 5.982455] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.982459] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.982537] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.982540] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.982711] acpi device:40: registered as cooling_device13 [ 5.982942] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.982946] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.983009] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.983013] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.983189] acpi device:41: registered as cooling_device14 [ 5.983419] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.983423] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.983496] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.983500] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.983724] acpi device:42: registered as cooling_device15 [ 5.983950] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.983959] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.984014] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.984017] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.984114] acpi device:43: registered as cooling_device16 [ 5.984313] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.984315] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.984376] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.984379] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.984483] acpi device:44: registered as cooling_device17 [ 5.984681] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.984684] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.984745] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.984747] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.984827] acpi device:45: registered as cooling_device18 [ 5.985021] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.985023] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.985084] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.985086] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.985161] acpi device:46: registered as cooling_device19 [ 5.985357] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.985359] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.985422] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.985424] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.985511] acpi device:47: registered as cooling_device20 [ 5.985696] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.985698] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.985759] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.985762] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.985839] acpi device:48: registered as cooling_device21 [ 5.986025] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.986028] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.986088] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.986090] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.986170] acpi device:49: registered as cooling_device22 [ 5.986354] [drm:asle_set_backlight], bclp = 0x80000000 [ 5.986357] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.986420] [drm:asle_set_backlight], bclp = 0x800000ff [ 5.986422] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 5.986508] acpi device:4a: registered as cooling_device23 [ 5.986553] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.986609] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 5.986686] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.986739] initcall i915_init+0x0/0x66 [i915] returned 0 after 700300 usecs [ 5.990621] dracut: Starting plymouth daemon [ 6.003000] [drm:i915_driver_open], [ 6.003013] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 6.003017] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003019] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003022] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 6.003024] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003026] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003027] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 6.003029] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003030] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003035] [drm:i915_driver_open], [ 6.003039] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 6.003041] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003042] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003044] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 6.003046] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003047] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003049] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 6.003050] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003052] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003055] [drm:i915_driver_open], [ 6.003231] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 6.003234] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003235] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003237] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 6.003238] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003240] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003241] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 6.003243] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.003244] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.003395] dracut: error: unexpectedly disconnected from boot status daemon [ 6.013168] dracut: rd.dm=0: removing DM RAID activation [ 6.019169] dracut: rd.md=0: removing MD RAID activation [ 6.133334] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 6.133338] EXT4-fs (sda2): write access will be enabled during recovery [ 6.147355] EXT4-fs (sda2): recovery complete [ 6.147841] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.162679] dracut: Checking ext4: /dev/disk/by-uuid/d76bebc7-b84a-4598-854a-c881df6ee088 [ 6.162794] dracut: issuing e2fsck -a /dev/disk/by-uuid/d76bebc7-b84a-4598-854a-c881df6ee088 [ 6.168356] dracut: /dev/disk/by-uuid/d76bebc7-b84a-4598-854a-c881df6ee088: clean, 1790662/14131200 files, 18867242/56510208 blocks [ 6.168658] dracut: Remounting /dev/disk/by-uuid/d76bebc7-b84a-4598-854a-c881df6ee088 with -o ro [ 6.173915] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.177064] dracut: Mounted root filesystem /dev/sda2 [ 6.198068] dracut: Switching root [ 6.238931] calling inet6_init+0x0/0x2a7 [ipv6] @ 1 [ 6.239203] NET: Registered protocol family 10 [ 6.239366] initcall inet6_init+0x0/0x2a7 [ipv6] returned 0 after 413 usecs [ 6.285513] udevd[2432]: starting version 182 [ 6.315058] EXT4-fs (sda2): re-mounted. Opts: (null) [ 6.316731] calling uinput_init+0x0/0xc [uinput] @ 2786 [ 6.316780] initcall uinput_init+0x0/0xc [uinput] returned 0 after 43 usecs [ 6.337536] calling acpi_ac_init+0x0/0x4d [ac] @ 3287 [ 6.337601] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.337684] ACPI: AC Adapter [ADP1] (on-line) [ 6.337795] initcall acpi_ac_init+0x0/0x4d [ac] returned 0 after 245 usecs [ 6.347121] calling acpi_battery_init+0x0/0x15 [battery] @ 3291 [ 6.347130] initcall acpi_battery_init+0x0/0x15 [battery] returned 0 after 3 usecs [ 6.347486] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.347492] ACPI: Battery Slot [BAT0] (battery present) [ 6.347524] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.347528] ACPI: Battery Slot [BAT1] (battery absent) [ 6.347616] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.347619] ACPI: Battery Slot [BAT2] (battery absent) [ 6.353990] calling pcspkr_platform_driver_init+0x0/0xc [pcspkr] @ 3296 [ 6.354207] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 6.354314] initcall pcspkr_platform_driver_init+0x0/0xc [pcspkr] returned 0 after 309 usecs [ 6.356730] calling init_soundcore+0x0/0x9d [soundcore] @ 3291 [ 6.358717] calling lpc_ich_init+0x0/0x1a [lpc_ich] @ 3290 [ 6.358738] calling i2c_i801_init+0x0/0xa4 [i2c_i801] @ 3295 [ 6.358774] initcall init_soundcore+0x0/0x9d [soundcore] returned 0 after 1989 usecs [ 6.358828] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) [ 6.358836] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.358839] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130328/utaddress-251) [ 6.358844] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130328/utaddress-251) [ 6.358848] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.358850] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130328/utaddress-251) [ 6.358854] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130328/utaddress-251) [ 6.358857] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130328/utaddress-251) [ 6.358861] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.358863] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.358908] initcall lpc_ich_init+0x0/0x1a [lpc_ich] returned 0 after 180 usecs [ 6.359164] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251) [ 6.359169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.359212] initcall i2c_i801_init+0x0/0xa4 [i2c_i801] returned 0 after 455 usecs [ 6.361325] calling alsa_sound_init+0x0/0x93 [snd] @ 3291 [ 6.361342] initcall alsa_sound_init+0x0/0x93 [snd] returned 0 after 10 usecs [ 6.362719] calling microcode_init+0x0/0x1af [microcode] @ 3303 [ 6.362784] calling alsa_timer_init+0x0/0x17c [snd_timer] @ 3285 [ 6.362786] microcode: CPU0 sig=0x40661, pf=0x20, revision=0x2 [ 6.362848] initcall alsa_timer_init+0x0/0x17c [snd_timer] returned 0 after 54 usecs [ 6.365057] calling snd_mem_init+0x0/0x2a [snd_page_alloc] @ 3291 [ 6.365067] initcall snd_mem_init+0x0/0x2a [snd_page_alloc] returned 0 after 4 usecs [ 6.366843] calling alsa_pcm_init+0x0/0x67 [snd_pcm] @ 3285 [ 6.366855] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0 after 4 usecs [ 6.367971] calling alsa_hwdep_init+0x0/0x5f [snd_hwdep] @ 3285 [ 6.367979] initcall alsa_hwdep_init+0x0/0x5f [snd_hwdep] returned 0 after 2 usecs [ 6.372388] calling azx_driver_init+0x0/0x1a [snd_hda_intel] @ 3285 [ 6.372518] ALSA sound/pci/hda/hda_intel.c:3787 Haswell must build in CONFIG_SND_HDA_I915 [ 6.372573] ALSA sound/pci/hda/hda_intel.c:3817 Error request power-well from i915 [ 6.372785] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6.374159] microcode: CPU1 sig=0x40661, pf=0x20, revision=0x2 [ 6.375073] microcode: CPU2 sig=0x40661, pf=0x20, revision=0x2 [ 6.375330] microcode: CPU3 sig=0x40661, pf=0x20, revision=0x2 [ 6.375588] microcode: CPU4 sig=0x40661, pf=0x20, revision=0x2 [ 6.375866] microcode: CPU5 sig=0x40661, pf=0x20, revision=0x2 [ 6.376122] microcode: CPU6 sig=0x40661, pf=0x20, revision=0x2 [ 6.376367] calling iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] @ 3294 [ 6.376369] iTCO_vendor_support: vendor-support=0 [ 6.376372] initcall iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] returned 0 after 1 usecs [ 6.376482] microcode: CPU7 sig=0x40661, pf=0x20, revision=0x2 [ 6.376715] calling iTCO_wdt_init_module+0x0/0x24 [iTCO_wdt] @ 3294 [ 6.376717] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 6.376744] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 6.376996] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.377012] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 6.377020] initcall microcode_init+0x0/0x1af [microcode] returned 0 after 13947 usecs [ 6.377194] initcall iTCO_wdt_init_module+0x0/0x24 [iTCO_wdt] returned 0 after 461 usecs [ 6.382837] calling vmx_init+0x0/0x3ee [kvm_intel] @ 3304 [ 6.383035] calling patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] @ 3405 [ 6.383042] initcall patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] returned 0 after 0 usecs [ 6.383160] initcall vmx_init+0x0/0x3ee [kvm_intel] returned 0 after 306 usecs [ 6.383258] hda_codec: ALC262: SKU not ready 0x598301f0 [ 6.383507] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:hp [ 6.383511] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.383513] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.383516] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 6.383518] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0 [ 6.383519] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 6.383522] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x19 [ 6.383524] ALSA sound/pci/hda/hda_auto_parser.c:410 Internal Mic=0x12 [ 6.383527] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a [ 6.383529] ALSA sound/pci/hda/patch_realtek.c:486 realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d [ 6.383531] ALSA sound/pci/hda/patch_realtek.c:569 realtek: Enable default setup for auto mode as fallback [ 6.385184] calling coretemp_init+0x0/0x75 [coretemp] @ 3301 [ 6.385369] initcall coretemp_init+0x0/0x75 [coretemp] returned 0 after 174 usecs [ 6.389498] initcall azx_driver_init+0x0/0x1a [snd_hda_intel] returned 0 after 16684 usecs [ 6.390566] calling acpi_cpufreq_init+0x0/0x1e3 [acpi_cpufreq] @ 3310 [ 6.391755] initcall acpi_cpufreq_init+0x0/0x1e3 [acpi_cpufreq] returned 0 after 1151 usecs [ 6.492940] Adding 8388604k swap on /dev/sda1. Priority:0 extents:1 across:8388604k SS [ 6.612297] [drm:i915_driver_open], [ 6.612324] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 6.612329] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612331] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.612334] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 6.612336] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612337] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.612339] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 6.612341] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612342] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.612348] [drm:i915_driver_open], [ 6.612352] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 6.612354] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612355] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.612357] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 6.612358] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612360] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.612361] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 6.612363] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612364] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.612368] [drm:i915_driver_open], [ 6.612575] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 6.612578] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612579] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.612593] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 6.612596] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612598] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.612599] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 6.612601] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 6.612602] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 6.673772] watchdog (3502): /proc/3502/oom_adj is deprecated, please use /proc/3502/oom_score_adj instead. [ 6.743402] calling rfkill_init+0x0/0x71 [rfkill] @ 3582 [ 6.743521] initcall rfkill_init+0x0/0x71 [rfkill] returned 0 after 110 usecs [ 6.747417] calling bt_init+0x0/0x9b [bluetooth] @ 3582 [ 6.747420] Bluetooth: Core ver 2.16 [ 6.747451] NET: Registered protocol family 31 [ 6.747453] Bluetooth: HCI device and connection manager initialized [ 6.747460] Bluetooth: HCI socket layer initialized [ 6.747461] Bluetooth: L2CAP socket layer initialized [ 6.747465] Bluetooth: SCO socket layer initialized [ 6.747471] initcall bt_init+0x0/0x9b [bluetooth] returned 0 after 45 usecs [ 6.750510] calling bnep_init+0x0/0x78 [bnep] @ 3592 [ 6.750513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.750514] Bluetooth: BNEP filters: protocol multicast [ 6.750518] Bluetooth: BNEP socket layer initialized [ 6.750520] initcall bnep_init+0x0/0x78 [bnep] returned 0 after 6 usecs [ 6.838524] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 6.874256] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 6.878148] [drm:gen6_enable_rps], Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz [ 6.939237] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 6.939365] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.425115] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 8.425118] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 8.425152] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.628574] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 8.729671] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 8.729767] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.233576] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 10.233581] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 10.233613] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 43.141047] PM: Syncing filesystems ... done. [ 43.145980] PM: Preparing system for mem sleep [ 43.146099] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 43.156431] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 43.167437] PM: Entering mem sleep [ 43.167622] Suspending console(s) (use no_console_suspend to debug) [ 43.167718] calling coretemp.0+ @ 3678, parent: platform [ 43.167720] call coretemp.0+ returned 0 after 0 usecs [ 43.167722] calling microcode+ @ 3678, parent: platform [ 43.167723] call microcode+ returned 0 after 0 usecs [ 43.167724] calling iTCO_wdt+ @ 3678, parent: 0000:00:1f.0 [ 43.167725] call iTCO_wdt+ returned 0 after 0 usecs [ 43.167726] calling input6+ @ 3678, parent: pcspkr [ 43.167728] call input6+ returned 0 after 0 usecs [ 43.167730] calling input5+ @ 3678, parent: LNXVIDEO:00 [ 43.167731] call input5+ returned 0 after 0 usecs [ 43.167733] calling acpi_video10+ @ 3678, parent: 0000:00:02.0 [ 43.167734] call acpi_video10+ returned 0 after 0 usecs [ 43.167735] calling acpi_video9+ @ 3678, parent: 0000:00:02.0 [ 43.167736] call acpi_video9+ returned 0 after 0 usecs [ 43.167737] calling acpi_video8+ @ 3678, parent: 0000:00:02.0 [ 43.167738] call acpi_video8+ returned 0 after 0 usecs [ 43.167739] calling acpi_video7+ @ 3678, parent: 0000:00:02.0 [ 43.167739] call acpi_video7+ returned 0 after 0 usecs [ 43.167741] calling acpi_video6+ @ 3678, parent: 0000:00:02.0 [ 43.167741] call acpi_video6+ returned 0 after 0 usecs [ 43.167743] calling acpi_video5+ @ 3678, parent: 0000:00:02.0 [ 43.167743] call acpi_video5+ returned 0 after 0 usecs [ 43.167745] calling acpi_video4+ @ 3678, parent: 0000:00:02.0 [ 43.167745] call acpi_video4+ returned 0 after 0 usecs [ 43.167746] calling acpi_video3+ @ 3678, parent: 0000:00:02.0 [ 43.167747] call acpi_video3+ returned 0 after 0 usecs [ 43.167748] calling acpi_video2+ @ 3678, parent: 0000:00:02.0 [ 43.167749] call acpi_video2+ returned 0 after 0 usecs [ 43.167750] calling acpi_video1+ @ 3678, parent: 0000:00:02.0 [ 43.167750] call acpi_video1+ returned 0 after 0 usecs [ 43.167751] calling acpi_video0+ @ 3678, parent: 0000:00:02.0 [ 43.167752] call acpi_video0+ returned 0 after 0 usecs [ 43.167754] calling card0-HDMI-A-2+ @ 3678, parent: card0 [ 43.167755] call card0-HDMI-A-2+ returned 0 after 0 usecs [ 43.167756] calling i2c-7+ @ 3678, parent: card0-DP-2 [ 43.167757] call i2c-7+ returned 0 after 0 usecs [ 43.167758] calling card0-DP-2+ @ 3678, parent: card0 [ 43.167758] call card0-DP-2+ returned 0 after 0 usecs [ 43.167759] calling card0-HDMI-A-1+ @ 3678, parent: card0 [ 43.167760] call card0-HDMI-A-1+ returned 0 after 0 usecs [ 43.167761] calling i2c-6+ @ 3678, parent: card0-DP-1 [ 43.167762] call i2c-6+ returned 0 after 0 usecs [ 43.167762] calling card0-DP-1+ @ 3678, parent: card0 [ 43.167763] call card0-DP-1+ returned 0 after 0 usecs [ 43.167764] calling card0-VGA-1+ @ 3678, parent: card0 [ 43.167764] call card0-VGA-1+ returned 0 after 0 usecs [ 43.167765] calling i2c-5+ @ 3678, parent: 0000:00:02.0 [ 43.167766] call i2c-5+ returned 0 after 0 usecs [ 43.167767] calling i2c-4+ @ 3678, parent: 0000:00:02.0 [ 43.167767] call i2c-4+ returned 0 after 0 usecs [ 43.167768] calling i2c-3+ @ 3678, parent: 0000:00:02.0 [ 43.167768] call i2c-3+ returned 0 after 0 usecs [ 43.167769] calling i2c-2+ @ 3678, parent: 0000:00:02.0 [ 43.167770] call i2c-2+ returned 0 after 0 usecs [ 43.167771] calling i2c-1+ @ 3678, parent: 0000:00:02.0 [ 43.167771] call i2c-1+ returned 0 after 0 usecs [ 43.167772] calling i2c-0+ @ 3678, parent: 0000:00:02.0 [ 43.167773] call i2c-0+ returned 0 after 0 usecs [ 43.167774] calling card0+ @ 3678, parent: 0000:00:02.0 [ 43.167775] call card0+ returned 0 after 0 usecs [ 43.167776] calling controlD64+ @ 3678, parent: 0000:00:02.0 [ 43.167777] call controlD64+ returned 0 after 0 usecs [ 43.167778] calling input4+ @ 3678, parent: LNXPWRBN:00 [ 43.167779] call input4+ returned 0 after 0 usecs [ 43.167780] calling input3+ @ 3678, parent: PNP0C0C:00 [ 43.167781] call input3+ returned 0 after 0 usecs [ 43.167782] calling input2+ @ 3678, parent: PNP0C0D:00 [ 43.167783] call input2+ returned 0 after 0 usecs [ 43.167787] calling input1+ @ 3678, parent: 3-5:1.0 [ 43.167788] call input1+ returned 0 after 0 usecs [ 43.167801] calling input0+ @ 3678, parent: serio0 [ 43.167802] call input0+ returned 0 after 0 usecs [ 43.167808] calling rtc0+ @ 3678, parent: 00:06 [ 43.167809] call rtc0+ returned 0 after 0 usecs [ 43.167811] calling serio0+ @ 3678, parent: i8042 [ 43.167813] calling 3-5+ @ 1043, parent: usb3 [ 43.167836] calling 1:0:0:0+ @ 1041, parent: target1:0:0 [ 43.167838] calling 2-1+ @ 1042, parent: usb2 [ 43.167839] call 1:0:0:0+ returned 0 after 1 usecs [ 43.167844] calling target1:0:0+ @ 1040, parent: host1 [ 43.167845] call target1:0:0+ returned 0 after 0 usecs [ 43.167856] calling 1-1+ @ 1040, parent: usb1 [ 43.167857] calling 0:0:0:0+ @ 1041, parent: target0:0:0 [ 43.167862] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 43.167943] sd 0:0:0:0: [sda] Stopping disk [ 43.168275] call 3-5+ returned 0 after 449 usecs [ 43.170015] call 2-1+ returned 0 after 2121 usecs [ 43.170031] call 1-1+ returned 0 after 2120 usecs [ 43.172892] call serio0+ returned 0 after 4955 usecs [ 43.172894] calling i8042+ @ 3678, parent: platform [ 43.173093] call i8042+ returned 0 after 193 usecs [ 43.173126] calling usb4+ @ 1040, parent: 0000:00:14.0 [ 43.173139] call usb4+ returned 0 after 11 usecs [ 43.173146] calling serial8250+ @ 3678, parent: platform [ 43.173148] call serial8250+ returned 0 after 0 usecs [ 43.173154] calling usb3+ @ 1040, parent: 0000:00:14.0 [ 43.173155] calling vesafb.0+ @ 3678, parent: platform [ 43.173156] call vesafb.0+ returned 0 after 0 usecs [ 43.173159] calling alarmtimer+ @ 3678, parent: platform [ 43.173161] calling usb2+ @ 1043, parent: 0000:00:1d.0 [ 43.173162] call alarmtimer+ returned 0 after 0 usecs [ 43.173165] calling pcspkr+ @ 3678, parent: platform [ 43.173168] calling usb1+ @ 1044, parent: 0000:00:1a.0 [ 43.173170] calling host5+ @ 1042, parent: ata6 [ 43.173171] call host5+ returned 0 after 0 usecs [ 43.173173] call pcspkr+ returned 0 after 7 usecs [ 43.173185] calling host3+ @ 1045, parent: ata4 [ 43.173186] call host3+ returned 0 after 0 usecs [ 43.173188] calling host2+ @ 6, parent: ata3 [ 43.173189] calling host4+ @ 1042, parent: ata5 [ 43.173191] call host2+ returned 0 after 0 usecs [ 43.173192] calling host1+ @ 1045, parent: ata2 [ 43.173193] call host4+ returned 0 after 0 usecs [ 43.173193] call host1+ returned 0 after 0 usecs [ 43.173196] calling ata5+ @ 1045, parent: 0000:00:1f.2 [ 43.173197] calling ata6+ @ 1042, parent: 0000:00:1f.2 [ 43.173208] calling 00:0c+ @ 3678, parent: pnp0 [ 43.173211] call 00:0c+ returned 0 after 2 usecs [ 43.173212] calling 00:0b+ @ 3678, parent: pnp0 [ 43.173213] call 00:0b+ returned 0 after 0 usecs [ 43.173215] calling 00:0a+ @ 3678, parent: pnp0 [ 43.173216] call ata6+ returned 0 after 17 usecs [ 43.173217] call 00:0a+ returned 0 after 0 usecs [ 43.173218] calling ata4+ @ 1209, parent: 0000:00:1f.2 [ 43.173219] calling 00:09+ @ 3678, parent: pnp0 [ 43.173220] calling ata3+ @ 1042, parent: 0000:00:1f.2 [ 43.173221] call 00:09+ returned 0 after 0 usecs [ 43.173223] calling 00:08+ @ 3678, parent: pnp0 [ 43.173232] call ata5+ returned 0 after 34 usecs [ 43.173234] calling ata2+ @ 1045, parent: 0000:00:1f.2 [ 43.173240] call ata3+ returned 0 after 17 usecs [ 43.173254] call usb3+ returned 0 after 97 usecs [ 43.173257] call ata4+ returned 0 after 36 usecs [ 43.173311] call 00:08+ returned 0 after 84 usecs [ 43.173313] calling 00:07+ @ 3678, parent: pnp0 [ 43.173314] call 00:07+ returned 0 after 0 usecs [ 43.173315] calling 00:06+ @ 3678, parent: pnp0 [ 43.173320] call 00:06+ returned 0 after 4 usecs [ 43.173321] calling 00:05+ @ 3678, parent: pnp0 [ 43.173322] call 00:05+ returned 0 after 0 usecs [ 43.173323] calling 00:04+ @ 3678, parent: pnp0 [ 43.173324] call 00:04+ returned 0 after 0 usecs [ 43.173325] calling 00:03+ @ 3678, parent: pnp0 [ 43.173325] call 00:03+ returned 0 after 0 usecs [ 43.173326] calling 00:02+ @ 3678, parent: pnp0 [ 43.173327] call 00:02+ returned 0 after 0 usecs [ 43.173327] calling 00:01+ @ 3678, parent: pnp0 [ 43.173328] call 00:01+ returned 0 after 0 usecs [ 43.173329] calling 00:00+ @ 3678, parent: pnp0 [ 43.173346] call 00:00+ returned 0 after 16 usecs [ 43.173349] calling dock.0+ @ 3678, parent: platform [ 43.173350] call dock.0+ returned 0 after 0 usecs [ 43.173355] call ata2+ returned 0 after 116 usecs [ 43.173358] calling 0000:00:1f.3+ @ 1209, parent: pci0000:00 [ 43.173362] calling PNP0C0B:04+ @ 3678, parent: device:4c [ 43.173370] call PNP0C0B:04+ returned 0 after 6 usecs [ 43.173371] calling 0000:00:1f.0+ @ 1040, parent: pci0000:00 [ 43.173372] calling PNP0C0B:03+ @ 3678, parent: device:4c [ 43.173373] call 0000:00:1f.0+ returned 0 after 0 usecs [ 43.173389] call PNP0C0B:03+ returned 0 after 16 usecs [ 43.173398] calling PNP0C0B:02+ @ 3678, parent: device:4c [ 43.173398] call PNP0C0B:02+ returned 0 after 0 usecs [ 43.173400] calling PNP0C0B:01+ @ 3678, parent: device:4c [ 43.173452] call 0000:00:1f.3+ returned 0 after 90 usecs [ 43.173455] calling 0000:00:1c.0+ @ 1209, parent: pci0000:00 [ 43.173457] call 0000:00:1c.0+ returned 0 after 0 usecs [ 43.173458] calling 0000:00:1b.0+ @ 1209, parent: pci0000:00 [ 43.173510] calling 0000:00:19.0+ @ 1042, parent: pci0000:00 [ 43.173596] calling 0000:00:16.3+ @ 3844, parent: pci0000:00 [ 43.173605] calling 0000:00:16.0+ @ 3845, parent: pci0000:00 [ 43.173607] call 0000:00:16.0+ returned 0 after 0 usecs [ 43.173610] calling 0000:00:14.0+ @ 3845, parent: pci0000:00 [ 43.173623] calling 0000:00:03.0+ @ 3846, parent: pci0000:00 [ 43.173624] call 0000:00:03.0+ returned 0 after 0 usecs [ 43.173628] calling 0000:00:02.0+ @ 3846, parent: pci0000:00 [ 43.173640] calling 0000:00:00.0+ @ 3847, parent: pci0000:00 [ 43.173641] call 0000:00:00.0+ returned 0 after 0 usecs [ 43.173661] call 0000:00:14.0+ returned 0 after 48 usecs [ 43.173738] call usb1+ returned 0 after 554 usecs [ 43.173739] call usb2+ returned 0 after 561 usecs [ 43.173743] calling 0000:00:1a.0+ @ 3843, parent: pci0000:00 [ 43.173745] calling 0000:00:1d.0+ @ 1040, parent: pci0000:00 [ 43.173784] call PNP0C0B:01+ returned 0 after 374 usecs [ 43.173786] calling PNP0C0B:00+ @ 3678, parent: device:4c [ 43.173799] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C [ 43.175159] call PNP0C0B:00+ returned 0 after 1338 usecs [ 43.184451] call 0000:00:16.3+ returned 0 after 10590 usecs [ 43.184522] call 0000:00:1a.0+ returned 0 after 10515 usecs [ 43.184586] call 0000:00:1d.0+ returned 0 after 10576 usecs [ 43.201875] call 0:0:0:0+ returned 0 after 33192 usecs [ 43.201897] calling target0:0:0+ @ 40, parent: host0 [ 43.201898] call target0:0:0+ returned 0 after 0 usecs [ 43.201907] calling host0+ @ 6, parent: ata1 [ 43.201909] call host0+ returned 0 after 0 usecs [ 43.201945] calling ata1+ @ 3842, parent: 0000:00:1f.2 [ 43.202058] call ata1+ returned 0 after 108 usecs [ 43.202079] calling 0000:00:1f.2+ @ 1045, parent: pci0000:00 [ 43.205465] [drm:intel_update_fbc], fbc set to per-chip default [ 43.205466] [drm:intel_update_fbc], plane not 0, disabling compression [ 43.212465] call 0000:00:1f.2+ returned 0 after 10131 usecs [ 43.231484] [drm:intel_update_fbc], no output, disabling [ 43.242477] call 0000:00:02.0+ returned 0 after 67178 usecs [ 43.290807] call 0000:00:19.0+ returned 0 after 114454 usecs [ 43.486689] call 0000:00:1b.0+ returned 0 after 305641 usecs [ 43.486718] PM: suspend of devices complete after 318.749 msecs [ 43.486798] PM: late suspend of devices complete after 0.077 msecs [ 43.486876] calling 0000:00:1f.3+ @ 3678, parent: pci0000:00 [ 43.486897] call 0000:00:1f.3+ returned 0 after 19 usecs [ 43.486898] calling 0000:00:1f.2+ @ 3678, parent: pci0000:00 [ 43.486899] call 0000:00:1f.2+ returned 0 after 0 usecs [ 43.486900] calling 0000:00:1f.0+ @ 3678, parent: pci0000:00 [ 43.486926] call 0000:00:1f.0+ returned 0 after 24 usecs [ 43.486926] calling 0000:00:1d.0+ @ 3678, parent: pci0000:00 [ 43.486983] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 43.497689] call 0000:00:1d.0+ returned 0 after 10501 usecs [ 43.497690] calling 0000:00:1c.0+ @ 3678, parent: pci0000:00 [ 43.497721] call 0000:00:1c.0+ returned 0 after 29 usecs [ 43.497721] calling 0000:00:1b.0+ @ 3678, parent: pci0000:00 [ 43.497722] call 0000:00:1b.0+ returned 0 after 0 usecs [ 43.497723] calling 0000:00:1a.0+ @ 3678, parent: pci0000:00 [ 43.497766] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 43.508692] call 0000:00:1a.0+ returned 0 after 10703 usecs [ 43.508693] calling 0000:00:19.0+ @ 3678, parent: pci0000:00 [ 43.508718] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 43.519699] call 0000:00:19.0+ returned 0 after 10738 usecs [ 43.519700] calling 0000:00:16.3+ @ 3678, parent: pci0000:00 [ 43.519701] call 0000:00:16.3+ returned 0 after 0 usecs [ 43.519701] calling 0000:00:16.0+ @ 3678, parent: pci0000:00 [ 43.519721] call 0000:00:16.0+ returned 0 after 19 usecs [ 43.519722] calling 0000:00:14.0+ @ 3678, parent: pci0000:00 [ 43.519750] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 43.530712] call 0000:00:14.0+ returned 0 after 10722 usecs [ 43.530713] calling 0000:00:03.0+ @ 3678, parent: pci0000:00 [ 43.530722] call 0000:00:03.0+ returned 0 after 8 usecs [ 43.530722] calling 0000:00:02.0+ @ 3678, parent: pci0000:00 [ 43.530723] call 0000:00:02.0+ returned 0 after 0 usecs [ 43.530724] calling 0000:00:00.0+ @ 3678, parent: pci0000:00 [ 43.530731] call 0000:00:00.0+ returned 0 after 7 usecs [ 43.530748] PM: noirq suspend of devices complete after 43.913 msecs [ 43.537108] ACPI: Preparing to enter system sleep state S3 [ 43.661894] PM: Saving platform NVS memory [ 43.664802] Disabling non-boot CPUs ... [ 43.666064] smpboot: CPU 1 is now offline [ 43.673639] smpboot: CPU 2 is now offline [ 43.681152] smpboot: CPU 3 is now offline [ 43.688661] smpboot: CPU 4 is now offline [ 43.700485] smpboot: CPU 5 is now offline [ 43.701767] smpboot: CPU 6 is now offline [ 43.702089] Broke affinity for irq 40 [ 43.703117] smpboot: CPU 7 is now offline [ 43.703288] PM: Calling kvm_suspend+0x0/0x18 [kvm] [ 43.703292] PM: Calling mce_syscore_suspend+0x0/0x2 [ 43.703298] PM: Calling acpi_processor_suspend+0x0/0x16 [ 43.703307] PM: Calling timekeeping_suspend+0x0/0x11e [ 43.703332] PM: Calling save_ioapic_entries+0x0/0x5f [ 43.703401] PM: Calling i8259A_suspend+0x0/0x1e [ 43.703407] PM: Calling fw_suspend+0x0/0xd [ 43.703410] PM: Calling cpufreq_bp_suspend+0x0/0x5a [ 43.703412] PM: Calling lapic_suspend+0x0/0x168 [ 43.722614] ACPI: Low-level resume complete [ 43.722659] PM: Restoring platform NVS memory [ 43.723421] PM: Calling lapic_resume+0x0/0x20b [ 43.723451] PM: Calling cpufreq_bp_resume+0x0/0x62 [ 43.723461] PM: Calling irqrouter_resume+0x0/0x35 [ 43.723464] PM: Calling i8259A_resume+0x0/0x25 [ 43.723611] PM: Calling i8237A_resume+0x0/0x80 [ 43.723672] PM: Calling ioapic_resume+0x0/0x6e [ 43.723696] PM: Calling timekeeping_resume+0x0/0x168 [ 43.723734] PM: Calling irq_pm_syscore_resume+0x0/0xa [ 43.723743] PM: Calling acpi_processor_resume+0x0/0x2e [ 43.723751] PM: Calling mce_syscore_resume+0x0/0x1c [ 43.723774] PM: Calling mc_bp_resume+0x0/0x30 [microcode] [ 43.723779] PM: Calling kvm_resume+0x0/0x34 [kvm] [ 43.723789] Enabling non-boot CPUs ... [ 43.723816] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 43.743485] CPU1 is up [ 43.743499] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 43.763155] CPU2 is up [ 43.763167] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 43.782825] CPU3 is up [ 43.782837] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 43.807364] CPU4 is up [ 43.807376] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 43.831154] CPU5 is up [ 43.831166] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 43.855160] CPU6 is up [ 43.855172] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 43.879185] CPU7 is up [ 44.019110] ACPI: Waking up from system sleep state S3 [ 44.045732] calling 0000:00:00.0+ @ 3678, parent: pci0000:00 [ 44.045743] call 0000:00:00.0+ returned 0 after 9 usecs [ 44.045743] calling 0000:00:02.0+ @ 3678, parent: pci0000:00 [ 44.056518] call 0000:00:02.0+ returned 0 after 10512 usecs [ 44.056518] calling 0000:00:03.0+ @ 3678, parent: pci0000:00 [ 44.056530] call 0000:00:03.0+ returned 0 after 10 usecs [ 44.056531] calling 0000:00:14.0+ @ 3678, parent: pci0000:00 [ 44.067565] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 44.067577] call 0000:00:14.0+ returned 0 after 10777 usecs [ 44.067579] calling 0000:00:16.0+ @ 3678, parent: pci0000:00 [ 44.067602] call 0000:00:16.0+ returned 0 after 22 usecs [ 44.067603] calling 0000:00:16.3+ @ 3678, parent: pci0000:00 [ 44.078552] call 0000:00:16.3+ returned 0 after 10682 usecs [ 44.078552] calling 0000:00:19.0+ @ 3678, parent: pci0000:00 [ 44.089556] call 0000:00:19.0+ returned 0 after 10736 usecs [ 44.089557] calling 0000:00:1a.0+ @ 3678, parent: pci0000:00 [ 44.100589] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 44.100593] call 0000:00:1a.0+ returned 0 after 10767 usecs [ 44.100593] calling 0000:00:1b.0+ @ 3678, parent: pci0000:00 [ 44.111577] call 0000:00:1b.0+ returned 0 after 10717 usecs [ 44.111578] calling 0000:00:1c.0+ @ 3678, parent: pci0000:00 [ 44.111619] call 0000:00:1c.0+ returned 0 after 39 usecs [ 44.111620] calling 0000:00:1d.0+ @ 3678, parent: pci0000:00 [ 44.122605] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 44.122608] call 0000:00:1d.0+ returned 0 after 10720 usecs [ 44.122608] calling 0000:00:1f.0+ @ 3678, parent: pci0000:00 [ 44.122635] call 0000:00:1f.0+ returned 0 after 25 usecs [ 44.122635] calling 0000:00:1f.2+ @ 3678, parent: pci0000:00 [ 44.133601] call 0000:00:1f.2+ returned 0 after 10699 usecs [ 44.133602] calling 0000:00:1f.3+ @ 3678, parent: pci0000:00 [ 44.133617] call 0000:00:1f.3+ returned 0 after 14 usecs [ 44.133657] PM: noirq resume of devices complete after 87.867 msecs [ 44.133719] PM: early resume of devices complete after 0.040 msecs [ 44.133729] calling 0000:00:00.0+ @ 3847, parent: pci0000:00 [ 44.133731] call 0000:00:00.0+ returned 0 after 0 usecs [ 44.133733] calling 0000:00:03.0+ @ 3847, parent: pci0000:00 [ 44.133734] calling 0000:00:02.0+ @ 1209, parent: pci0000:00 [ 44.133735] call 0000:00:03.0+ returned 0 after 0 usecs [ 44.133738] calling 0000:00:14.0+ @ 1042, parent: pci0000:00 [ 44.133739] calling 0000:00:16.0+ @ 3847, parent: pci0000:00 [ 44.133740] call 0000:00:16.0+ returned 0 after 0 usecs [ 44.133742] i915 0000:00:02.0: setting latency timer to 64 [ 44.133743] calling 0000:00:16.3+ @ 3846, parent: pci0000:00 [ 44.133744] calling 0000:00:19.0+ @ 3847, parent: pci0000:00 [ 44.133748] calling 0000:00:1a.0+ @ 1045, parent: pci0000:00 [ 44.133753] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 44.133755] call 0000:00:16.3+ returned 0 after 9 usecs [ 44.133758] calling 0000:00:1b.0+ @ 3846, parent: pci0000:00 [ 44.133766] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 44.133768] e1000e 0000:00:19.0: setting latency timer to 64 [ 44.133769] calling PNP0C0A:00+ @ 3678, parent: PNP0C09:00 [ 44.133777] calling 0000:00:1c.0+ @ 3842, parent: pci0000:00 [ 44.133779] call 0000:00:1c.0+ returned 0 after 1 usecs [ 44.133782] calling 0000:00:1f.0+ @ 3842, parent: pci0000:00 [ 44.133784] calling 0000:00:1d.0+ @ 6, parent: pci0000:00 [ 44.133784] call 0000:00:1f.0+ returned 0 after 0 usecs [ 44.133785] calling 0000:00:1f.2+ @ 3842, parent: pci0000:00 [ 44.133798] ahci 0000:00:1f.2: setting latency timer to 64 [ 44.133801] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 44.133804] calling 0000:00:1f.3+ @ 40, parent: pci0000:00 [ 44.133833] call 0000:00:14.0+ returned 0 after 91 usecs [ 44.133838] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 44.133863] call 0000:00:1a.0+ returned 0 after 111 usecs [ 44.133925] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 44.134024] calling usb1+ @ 3859, parent: 0000:00:1a.0 [ 44.134038] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 44.134056] call 0000:00:1d.0+ returned 0 after 264 usecs [ 44.134071] call 0000:00:1f.3+ returned 0 after 259 usecs [ 44.134113] call PNP0C0A:00+ returned 0 after 333 usecs [ 44.134114] calling PNP0C0A:01+ @ 3678, parent: PNP0C09:00 [ 44.134127] call PNP0C0A:01+ returned 0 after 12 usecs [ 44.134128] calling PNP0C0A:02+ @ 3678, parent: PNP0C09:00 [ 44.134191] call PNP0C0A:02+ returned 0 after 60 usecs [ 44.134206] calling ACPI0003:00+ @ 3678, parent: device:00 [ 44.134213] call ACPI0003:00+ returned 0 after 5 usecs [ 44.134214] calling PNP0C0D:00+ @ 3678, parent: device:00 [ 44.134278] call PNP0C0D:00+ returned 0 after 61 usecs [ 44.134279] calling PNP0C0C:00+ @ 3678, parent: device:00 [ 44.134280] call PNP0C0C:00+ returned 0 after 0 usecs [ 44.134282] calling PNP0C0B:00+ @ 3678, parent: device:4c [ 44.134285] calling usb2+ @ 3864, parent: 0000:00:1d.0 [ 44.134291] call PNP0C0B:00+ returned 0 after 7 usecs [ 44.134292] calling PNP0C0B:01+ @ 3678, parent: device:4c [ 44.134299] call PNP0C0B:01+ returned 0 after 6 usecs [ 44.134301] calling PNP0C0B:02+ @ 3678, parent: device:4c [ 44.134307] call PNP0C0B:02+ returned 0 after 5 usecs [ 44.134309] calling PNP0C0B:03+ @ 3678, parent: device:4c [ 44.134317] call PNP0C0B:03+ returned 0 after 7 usecs [ 44.134318] calling PNP0C0B:04+ @ 3678, parent: device:4c [ 44.134326] call PNP0C0B:04+ returned 0 after 7 usecs [ 44.134327] calling LNXTHERM:00+ @ 3678, parent: device:4c [ 44.134391] calling usb3+ @ 3871, parent: 0000:00:14.0 [ 44.134490] call LNXTHERM:00+ returned 0 after 157 usecs [ 44.134491] calling LNXTHERM:01+ @ 3678, parent: device:4c [ 44.134678] calling usb4+ @ 3890, parent: 0000:00:14.0 [ 44.134724] call usb4+ returned 0 after 43 usecs [ 44.134810] call LNXTHERM:01+ returned 0 after 309 usecs [ 44.134813] calling LNXPWRBN:00+ @ 3678, parent: LNXSYSTM:00 [ 44.134813] call LNXPWRBN:00+ returned 0 after 0 usecs [ 44.134814] calling dock.0+ @ 3678, parent: platform [ 44.134815] call dock.0+ returned 0 after 0 usecs [ 44.134816] calling 00:00+ @ 3678, parent: pnp0 [ 44.134818] call 00:00+ returned 0 after 0 usecs [ 44.134818] calling 00:01+ @ 3678, parent: pnp0 [ 44.134819] call 00:01+ returned 0 after 0 usecs [ 44.134819] calling 00:02+ @ 3678, parent: pnp0 [ 44.134820] call 00:02+ returned 0 after 0 usecs [ 44.134821] calling 00:03+ @ 3678, parent: pnp0 [ 44.134821] call 00:03+ returned 0 after 0 usecs [ 44.134822] calling 00:04+ @ 3678, parent: pnp0 [ 44.134822] call 00:04+ returned 0 after 0 usecs [ 44.134823] calling 00:05+ @ 3678, parent: pnp0 [ 44.134824] call 00:05+ returned 0 after 0 usecs [ 44.134825] calling 00:06+ @ 3678, parent: pnp0 [ 44.134826] call 00:06+ returned 0 after 0 usecs [ 44.134827] calling 00:07+ @ 3678, parent: pnp0 [ 44.134828] call 00:07+ returned 0 after 0 usecs [ 44.134828] calling 00:08+ @ 3678, parent: pnp0 [ 44.134873] serial 00:08: activated [ 44.134875] call 00:08+ returned 0 after 45 usecs [ 44.134876] calling 00:09+ @ 3678, parent: pnp0 [ 44.134881] dpm_run_callback(): pnp_bus_resume+0x0/0x6c returns -19 [ 44.134881] call 00:09+ returned -19 after 4 usecs [ 44.134883] PM: Device 00:09 failed to resume: error -19 [ 44.134883] calling 00:0a+ @ 3678, parent: pnp0 [ 44.134884] call 00:0a+ returned 0 after 0 usecs [ 44.134885] calling 00:0b+ @ 3678, parent: pnp0 [ 44.134885] call 00:0b+ returned 0 after 0 usecs [ 44.134886] calling 00:0c+ @ 3678, parent: pnp0 [ 44.134887] call 00:0c+ returned 0 after 0 usecs [ 44.134900] calling pcspkr+ @ 3678, parent: platform [ 44.134901] call pcspkr+ returned 0 after 0 usecs [ 44.134902] calling alarmtimer+ @ 3678, parent: platform [ 44.134903] call alarmtimer+ returned 0 after 0 usecs [ 44.134905] calling vesafb.0+ @ 3678, parent: platform [ 44.134905] call vesafb.0+ returned 0 after 0 usecs [ 44.134909] calling serial8250+ @ 3678, parent: platform [ 44.134910] call serial8250+ returned 0 after 0 usecs [ 44.134975] [drm:i915_redisable_vga], Something enabled VGA plane, disabling it [ 44.135299] [drm:intel_opregion_setup], graphic opregion physical addr: 0xa2fc1018 [ 44.135306] [drm:intel_opregion_setup], Public ACPI methods supported [ 44.135307] [drm:intel_opregion_setup], SWSCI supported [ 44.135308] [drm:intel_opregion_setup], ASLE supported [ 44.144626] call 0000:00:1f.2+ returned 0 after 10576 usecs [ 44.144632] calling ata3+ @ 3843, parent: 0000:00:1f.2 [ 44.144634] calling ata1+ @ 1041, parent: 0000:00:1f.2 [ 44.144636] calling ata4+ @ 3844, parent: 0000:00:1f.2 [ 44.144639] calling ata6+ @ 1044, parent: 0000:00:1f.2 [ 44.144648] calling ata5+ @ 1043, parent: 0000:00:1f.2 [ 44.144650] calling ata2+ @ 1040, parent: 0000:00:1f.2 [ 44.144668] call ata3+ returned 0 after 34 usecs [ 44.144672] call ata4+ returned 0 after 33 usecs [ 44.144680] calling host3+ @ 3853, parent: ata4 [ 44.144682] calling host2+ @ 3848, parent: ata3 [ 44.144683] call host3+ returned 0 after 0 usecs [ 44.144683] call host2+ returned 0 after 0 usecs [ 44.144699] call ata6+ returned 0 after 58 usecs [ 44.144703] calling host5+ @ 3857, parent: ata6 [ 44.144704] call host5+ returned 0 after 0 usecs [ 44.165712] call usb1+ returned 0 after 30917 usecs [ 44.165715] call usb2+ returned 0 after 30666 usecs [ 44.165725] calling 2-1+ @ 3906, parent: usb2 [ 44.165728] calling 1-1+ @ 3893, parent: usb1 [ 44.166616] call 1-1+ returned 0 after 864 usecs [ 44.166898] call 2-1+ returned 0 after 1142 usecs [ 44.186704] call usb3+ returned 0 after 51042 usecs [ 44.186735] calling 3-5+ @ 3918, parent: usb3 [ 44.187538] call 3-5+ returned 0 after 780 usecs [ 44.194709] [drm:init_status_page], render ring hws offset: 0x00000000 [ 44.194764] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 44.194769] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 44.194820] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 44.194862] [drm:init_status_page], video enhancement ring hws offset: 0x00064000 [ 44.194941] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode [ 44.194949] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode [ 44.194956] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode [ 44.194964] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode [ 44.194972] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode [ 44.195012] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: disabled [ 44.195013] [drm:intel_modeset_setup_hw_state], [CRTC:5] hw state readout: disabled [ 44.195015] [drm:intel_modeset_setup_hw_state], [CRTC:7] hw state readout: disabled [ 44.195017] [drm:intel_modeset_setup_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0 [ 44.195019] [drm:intel_modeset_setup_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0 [ 44.195020] [drm:intel_modeset_setup_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0 [ 44.195022] [drm:intel_modeset_setup_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled [ 44.195023] [drm:intel_modeset_setup_hw_state], [CONNECTOR:12:DP-1] hw state readout: disabled [ 44.195025] [drm:intel_modeset_setup_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled [ 44.195026] [drm:intel_modeset_setup_hw_state], [CONNECTOR:17:DP-2] hw state readout: disabled [ 44.195027] [drm:intel_modeset_setup_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled [ 44.195029] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 44.195030] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 44.195031] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 44.195033] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 44.195033] [drm:intel_dump_pipe_config], requested mode: [ 44.195035] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 44.195036] [drm:intel_dump_pipe_config], adjusted mode: [ 44.195038] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 44.195039] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 44.195040] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 44.195041] [drm:intel_dump_pipe_config], ips: 0 [ 44.195042] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 44.195043] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 44.195044] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 44.195045] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 44.195046] [drm:intel_dump_pipe_config], requested mode: [ 44.195047] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 44.195048] [drm:intel_dump_pipe_config], adjusted mode: [ 44.195049] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 44.195050] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 44.195051] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 44.195052] [drm:intel_dump_pipe_config], ips: 0 [ 44.195053] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C [ 44.195054] [drm:intel_dump_pipe_config], cpu_transcoder: C [ 44.195054] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 44.195056] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 44.195056] [drm:intel_dump_pipe_config], requested mode: [ 44.195058] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 44.195058] [drm:intel_dump_pipe_config], adjusted mode: [ 44.195060] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 44.195061] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 44.195061] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 44.195062] [drm:intel_dump_pipe_config], ips: 0 [ 44.195064] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 44.195066] [drm:connected_sink_compute_bpp], [CONNECTOR:12:DP-1] checking for sink bpp constrains [ 44.195068] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 148500KHz [ 44.195070] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24 [ 44.195071] [drm:intel_dp_compute_config], DP link bw required 356400 available 518400 [ 44.195073] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 44.195074] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 44.195075] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 44.195076] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 44.195077] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 44.195078] [drm:intel_dump_pipe_config], requested mode: [ 44.195079] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 44.195080] [drm:intel_dump_pipe_config], adjusted mode: [ 44.195082] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 44.195083] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 44.195084] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 44.195084] [drm:intel_dump_pipe_config], ips: 0 [ 44.195099] [drm:ironlake_update_plane], Writing base 00094000 00000000 0 0 7680 [ 44.195101] [drm:intel_update_fbc], no output, disabling [ 44.195108] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1920x1080] [ 44.195109] [drm:intel_ddi_mode_set], Preparing DDI mode on port B, pipe A [ 44.195110] [drm:intel_ddi_mode_set], DP audio on pipe A on DDI [ 44.195110] [drm:intel_ddi_mode_set], DP audio: write eld information [ 44.195112] [drm:intel_write_eld], ELD on [CONNECTOR:12:DP-1], [ENCODER:11:TMDS-11] [ 44.195113] [drm:haswell_write_eld], HDMI: Haswell Audio initialize.... [ 44.195114] [drm:haswell_write_eld], HDMI audio: enable codec [ 44.246484] call 0000:00:19.0+ returned 0 after 110006 usecs [ 44.246683] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 44.246686] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x 4 [ 44.246687] [drm:haswell_write_eld], HDMI audio: eld vld status=0x 5 [ 44.246694] [drm:haswell_write_eld], HDMI audio: audio conf: 0x 70fa60 [ 44.246696] [drm:haswell_write_eld], ELD on pipe A [ 44.246697] [drm:haswell_write_eld], ELD: DisplayPort detected [ 44.246701] [drm:haswell_write_eld], port num:0 [ 44.246701] [drm:haswell_write_eld], ELD size 7 [ 44.248334] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 44.249811] [drm:intel_dp_set_signal_levels], Using signal levels 07000000 [ 44.251294] [drm:intel_dp_start_link_train], clock recovery OK [ 44.251295] [drm:intel_dp_set_signal_levels], Using signal levels 07000000 [ 44.253082] [drm:intel_dp_set_signal_levels], Using signal levels 08000000 [ 44.256650] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 44.274664] [drm:intel_update_fbc], fbc set to per-chip default [ 44.274666] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 44.290682] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 44.290685] [drm:connected_sink_compute_bpp], [CONNECTOR:18:HDMI-A-2] checking for sink bpp constrains [ 44.290687] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output [ 44.290688] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI [ 44.290690] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 44.290692] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B [ 44.290693] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 44.290694] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 44.290696] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 44.290701] [drm:intel_dump_pipe_config], requested mode: [ 44.290704] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 44.290705] [drm:intel_dump_pipe_config], adjusted mode: [ 44.290708] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 44.290710] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 44.290711] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 44.290712] [drm:intel_dump_pipe_config], ips: 0 [ 44.290716] [drm:intel_ddi_put_crtc_pll], Disabling WRPLL 1 [ 44.290716] ------------[ cut here ]------------ [ 44.290733] WARNING: at drivers/gpu/drm/i915/intel_ddi.c:383 intel_ddi_put_crtc_pll+0x111/0x221 [i915]() [ 44.290756] Modules linked in: bnep bluetooth rfkill acpi_cpufreq mperf freq_table coretemp snd_hda_codec_realtek kvm_intel kvm iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc microcode snd_timer snd lpc_ich i2c_i801 soundcore pcspkr mfd_core battery ac uinput ipv6 i915 video button drm_kms_helper drm dm_mirror dm_region_hash dm_log dm_mod [ 44.290759] CPU: 0 PID: 1209 Comm: kworker/u16:8 Not tainted 3.10.0-rc2_drm-intel-next-queued_22e407_20130608_+ #3589 [ 44.290763] Hardware name: Intel Corporation Shark Bay Client platform/Basking Ridge, BIOS HSWLPTU1.86C.0109.R03.1301282055 01/28/2013 [ 44.290768] Workqueue: events_unbound async_run_entry_fn [ 44.290770] ffffffff816de142 0000000000000000 ffffffff8102c67d 0000000000000000 [ 44.290772] 0000000000000000 0000000000000011 ffff8801461dc000 ffff880148583000 [ 44.290774] 0000000000202418 0000000000000001 ffffffffa00b3599 ffff8801461dc000 [ 44.290775] Call Trace: [ 44.290780] [] ? dump_stack+0xd/0x17 [ 44.290787] [] ? warn_slowpath_common+0x5f/0x77 [ 44.290795] [] ? intel_ddi_put_crtc_pll+0x111/0x221 [i915] [ 44.290802] [] ? intel_ddi_pll_mode_set+0x41/0x7cf [i915] [ 44.290807] [] ? up+0xb/0x36 [ 44.290810] [] ? console_trylock+0x28/0x47 [ 44.290816] [] ? ivybridge_enable_vblank+0x16/0x5c [i915] [ 44.290822] [] ? drm_vblank_get+0x20f/0x220 [drm] [ 44.290834] [] ? haswell_crtc_mode_set+0x37/0x2b8 [i915] [ 44.290842] [] ? __intel_set_mode+0xcf6/0xf17 [i915] [ 44.290853] [] ? intel_modeset_setup_hw_state+0x68c/0x7c8 [i915] [ 44.290856] [] ? mutex_lock+0xd/0x2d [ 44.290861] [] ? __i915_drm_thaw+0x9e/0x188 [i915] [ 44.290865] [] ? pci_pm_restore+0x7b/0x7b [ 44.290874] [] ? i915_resume+0x7d/0x9f [i915] [ 44.290876] [] ? pci_pm_resume+0x54/0x7b [ 44.290880] [] ? dpm_run_callback.isra.11+0x24/0x52 [ 44.290882] [] ? device_resume+0x109/0x14a [ 44.290884] [] ? async_resume+0x14/0x38 [ 44.290890] [] ? async_run_entry_fn+0x55/0x10b [ 44.290893] [] ? process_one_work+0x1c5/0x2df [ 44.290895] [] ? worker_thread+0x1c7/0x2bc [ 44.290898] [] ? rescuer_thread+0x251/0x251 [ 44.290900] [] ? kthread+0xad/0xb5 [ 44.290905] [] ? kthread_freezable_should_stop+0x40/0x40 [ 44.290907] [] ? ret_from_fork+0x7c/0xb0 [ 44.290909] [] ? kthread_freezable_should_stop+0x40/0x40 [ 44.290910] ---[ end trace ffe50d9ee4f07f39 ]--- [ 44.290912] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B [ 44.291040] call 0000:00:1b.0+ returned 0 after 153469 usecs [ 44.292857] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20 [ 44.292889] [drm:ironlake_update_plane], Writing base 00094000 00000000 0 0 7680 [ 44.292891] [drm:intel_update_fbc], fbc set to per-chip default [ 44.292893] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 44.292899] [drm:intel_crtc_mode_set], [ENCODER:16:TMDS-16] set [MODE:0:1920x1080] [ 44.292900] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B [ 44.292902] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI [ 44.292903] [drm:intel_ddi_mode_set], HDMI audio: write eld information [ 44.292905] [drm:intel_write_eld], ELD on [CONNECTOR:18:HDMI-A-2], [ENCODER:16:TMDS-16] [ 44.292906] [drm:haswell_write_eld], HDMI: Haswell Audio initialize.... [ 44.292907] [drm:haswell_write_eld], HDMI audio: enable codec [ 44.344720] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 44.344722] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x 45 [ 44.344723] [drm:haswell_write_eld], HDMI audio: eld vld status=0x 55 [ 44.344725] [drm:haswell_write_eld], HDMI audio: audio conf: 0x 70fa60 [ 44.344726] [drm:haswell_write_eld], ELD on pipe B [ 44.344729] [drm:haswell_write_eld], port num:0 [ 44.344730] [drm:haswell_write_eld], ELD size 7 [ 44.396763] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 44.448805] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 44.448806] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 44.449821] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 44.450808] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 44.450812] [drm:intel_connector_check_state], [CONNECTOR:12:DP-1] [ 44.450816] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-2] [ 44.450818] [drm:intel_modeset_check_state], [ENCODER:10:DAC-10] [ 44.450820] [drm:intel_modeset_check_state], [ENCODER:11:TMDS-11] [ 44.450821] [drm:intel_modeset_check_state], [ENCODER:16:TMDS-16] [ 44.450823] [drm:intel_modeset_check_state], [CRTC:3] [ 44.450827] [drm:intel_modeset_check_state], [CRTC:5] [ 44.450830] [drm:intel_modeset_check_state], [CRTC:7] [ 44.450840] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 44.450846] [drm:intel_resume_hotplug], running encoder hotplug functions [ 44.451823] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 44.451839] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 44.452666] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 44.453196] ata2.00: configured for UDMA/100 [ 44.453818] ata5: SATA link down (SStatus 0 SControl 300) [ 44.453834] call ata5+ returned 0 after 301693 usecs [ 44.453840] calling host4+ @ 3855, parent: ata5 [ 44.453842] call host4+ returned 0 after 0 usecs [ 44.454034] call ata2+ returned 0 after 301886 usecs [ 44.454042] calling host1+ @ 3849, parent: ata2 [ 44.454043] call host1+ returned 0 after 0 usecs [ 44.454050] calling target1:0:0+ @ 3903, parent: host1 [ 44.454051] call target1:0:0+ returned 0 after 0 usecs [ 44.454058] calling 1:0:0:0+ @ 3904, parent: target1:0:0 [ 44.454059] call 1:0:0:0+ returned 0 after 0 usecs [ 44.461845] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 44.461846] [drm:intel_crt_detect], CRT not detected via hotplug [ 44.462028] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 44.462030] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 44.462031] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 44.462032] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 44.462536] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 44.462537] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 44.462539] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 44.462541] [drm:drm_helper_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from unknown to disconnected [ 44.463093] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 44.463523] [drm:intel_dp_probe_oui], Sink OUI: 4ce000 [ 44.463954] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 44.464877] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.490867] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.516813] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.516815] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 44.516817] [drm:drm_helper_hpd_irq_event], [CONNECTOR:12:DP-1] status updated from unknown to connected [ 44.516984] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 44.516985] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 44.516987] [drm:drm_helper_hpd_irq_event], [CONNECTOR:15:HDMI-A-1] status updated from unknown to disconnected [ 44.519934] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 44.524809] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 44.528814] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 44.529870] [drm:drm_helper_hpd_irq_event], [CONNECTOR:17:DP-2] status updated from unknown to disconnected [ 44.555514] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 44.555516] [drm:drm_helper_hpd_irq_event], [CONNECTOR:18:HDMI-A-2] status updated from unknown to connected [ 44.555533] [drm:drm_fb_helper_hotplug_event], [ 44.555535] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 44.555542] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 44.555543] [drm:intel_crt_detect], CRT not detected via hotplug [ 44.555708] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 44.555710] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 44.555711] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 44.555712] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 44.556202] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 44.556204] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 44.556205] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 44.556207] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 44.556208] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] [ 44.556743] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 44.557171] [drm:intel_dp_probe_oui], Sink OUI: 4ce000 [ 44.557601] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 44.558525] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.584512] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.610494] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.610495] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 44.611420] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.637400] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.663394] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 44.663417] [drm:drm_edid_to_eld], ELD monitor VE228 [ 44.663418] [drm:drm_edid_to_eld], ELD size 7, SAD count 1 [ 44.663445] [drm:drm_mode_debug_printmodeline], Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 44.663446] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12 [ 44.663450] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] probed modes : [ 44.663453] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 44.663456] [drm:drm_mode_debug_printmodeline], Modeline 56:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 44.663459] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1110 0x40 0x9 [ 44.663462] [drm:drm_mode_debug_printmodeline], Modeline 55:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 44.663465] [drm:drm_mode_debug_printmodeline], Modeline 47:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 44.663467] [drm:drm_mode_debug_printmodeline], Modeline 31:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 44.663470] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 44.663473] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 44.663476] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 44.663478] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 44.663481] [drm:drm_mode_debug_printmodeline], Modeline 22:"1366x768" 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5 [ 44.663484] [drm:drm_mode_debug_printmodeline], Modeline 26:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 44.663487] [drm:drm_mode_debug_printmodeline], Modeline 54:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 44.663489] [drm:drm_mode_debug_printmodeline], Modeline 48:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 44.663492] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 44.663495] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 44.663498] [drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 44.663500] [drm:drm_mode_debug_printmodeline], Modeline 43:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 44.663503] [drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 44.663506] [drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 44.663508] [drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 44.663511] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 44.663514] [drm:drm_mode_debug_printmodeline], Modeline 53:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 44.663517] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 44.663519] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 44.663522] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 44.663524] [drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 44.663527] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 44.663530] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 44.663532] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 44.663534] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 44.663701] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 44.663702] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 44.663704] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 44.663705] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 44.666648] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 44.670929] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 44.674926] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 44.675988] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 44.675989] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 44.701627] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 44.727273] [drm:drm_edid_to_eld], ELD monitor VE228 [ 44.727275] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 44.727276] [drm:drm_edid_to_eld], ELD size 7, SAD count 1 [ 44.727302] [drm:drm_mode_debug_printmodeline], Modeline 62:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 44.727303] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12 [ 44.727306] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] probed modes : [ 44.727309] [drm:drm_mode_debug_printmodeline], Modeline 78:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 44.727312] [drm:drm_mode_debug_printmodeline], Modeline 88:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 44.727315] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1110 0x40 0x9 [ 44.727318] [drm:drm_mode_debug_printmodeline], Modeline 87:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 44.727321] [drm:drm_mode_debug_printmodeline], Modeline 79:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 44.727323] [drm:drm_mode_debug_printmodeline], Modeline 63:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 44.727326] [drm:drm_mode_debug_printmodeline], Modeline 71:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 44.727329] [drm:drm_mode_debug_printmodeline], Modeline 59:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 44.727332] [drm:drm_mode_debug_printmodeline], Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 44.727334] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 44.727337] [drm:drm_mode_debug_printmodeline], Modeline 25:"1366x768" 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5 [ 44.727340] [drm:drm_mode_debug_printmodeline], Modeline 58:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 44.727342] [drm:drm_mode_debug_printmodeline], Modeline 86:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 44.727345] [drm:drm_mode_debug_printmodeline], Modeline 80:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 44.727348] [drm:drm_mode_debug_printmodeline], Modeline 72:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 44.727351] [drm:drm_mode_debug_printmodeline], Modeline 73:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 44.727353] [drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 44.727356] [drm:drm_mode_debug_printmodeline], Modeline 75:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 44.727359] [drm:drm_mode_debug_printmodeline], Modeline 77:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 44.727362] [drm:drm_mode_debug_printmodeline], Modeline 76:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 44.727364] [drm:drm_mode_debug_printmodeline], Modeline 64:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 44.727367] [drm:drm_mode_debug_printmodeline], Modeline 65:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 44.727370] [drm:drm_mode_debug_printmodeline], Modeline 85:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 44.727372] [drm:drm_mode_debug_printmodeline], Modeline 82:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 44.727375] [drm:drm_mode_debug_printmodeline], Modeline 67:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 44.727378] [drm:drm_mode_debug_printmodeline], Modeline 66:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 44.727381] [drm:drm_mode_debug_printmodeline], Modeline 68:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 44.727383] [drm:drm_mode_debug_printmodeline], Modeline 69:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 44.727386] [drm:drm_mode_debug_printmodeline], Modeline 83:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 44.727389] [drm:drm_mode_debug_printmodeline], Modeline 70:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 44.727390] [drm:drm_setup_crtcs], [ 44.727391] [drm:drm_enable_connectors], connector 9 enabled? no [ 44.727393] [drm:drm_enable_connectors], connector 12 enabled? yes [ 44.727394] [drm:drm_enable_connectors], connector 15 enabled? no [ 44.727395] [drm:drm_enable_connectors], connector 17 enabled? no [ 44.727396] [drm:drm_enable_connectors], connector 18 enabled? yes [ 44.727397] [drm:drm_target_preferred], looking for cmdline mode on connector 12 [ 44.727399] [drm:drm_target_preferred], looking for preferred mode on connector 12 [ 44.727400] [drm:drm_target_preferred], found mode 1920x1080 [ 44.727401] [drm:drm_target_preferred], looking for cmdline mode on connector 18 [ 44.727402] [drm:drm_target_preferred], looking for preferred mode on connector 18 [ 44.727403] [drm:drm_target_preferred], found mode 1920x1080 [ 44.727404] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 44.727408] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [ 44.727409] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5 [ 44.727413] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 44.727415] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 44.727417] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 44.727419] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 44.727421] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 44.727423] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 44.727424] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 44.727426] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 44.727427] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 44.727746] i915 0000:00:02.0: More than 8 outputs detected via ACPI [ 44.728546] [drm:intel_crtc_set_config], [CRTC:3] [FB:52] #connectors=1 (x y) (0 0) [ 44.728548] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 44.728549] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 44.728551] [drm:intel_crtc_set_config], [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 44.728553] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:DP-1] to [CRTC:3] [ 44.728554] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-2] to [CRTC:5] [ 44.729034] call 0000:00:02.0+ returned 0 after 580877 usecs [ 44.993300] ata1.00: configured for UDMA/133 [ 44.993306] call ata1+ returned 0 after 828111 usecs [ 44.993314] calling host0+ @ 1042, parent: ata1 [ 44.993315] call host0+ returned 0 after 0 usecs [ 44.993329] calling target0:0:0+ @ 3890, parent: host0 [ 44.993332] calling i8042+ @ 3678, parent: platform [ 44.993333] call target0:0:0+ returned 0 after 0 usecs [ 44.993342] calling 0:0:0:0+ @ 3891, parent: target0:0:0 [ 44.993345] sd 0:0:0:0: [sda] Starting disk [ 44.993537] call i8042+ returned 0 after 199 usecs [ 44.993539] calling serio0+ @ 3678, parent: i8042 [ 44.993543] call serio0+ returned 0 after 3 usecs [ 44.993545] calling rtc0+ @ 3678, parent: 00:06 [ 44.993546] call rtc0+ returned 0 after 0 usecs [ 44.993549] calling input0+ @ 3678, parent: serio0 [ 44.993559] call input0+ returned 0 after 9 usecs [ 44.993780] call 0:0:0:0+ returned 0 after 426 usecs [ 44.993830] calling input1+ @ 3678, parent: 3-5:1.0 [ 44.993844] call input1+ returned 0 after 12 usecs [ 44.993847] calling input2+ @ 3678, parent: PNP0C0D:00 [ 44.993848] call input2+ returned 0 after 0 usecs [ 44.993849] calling input3+ @ 3678, parent: PNP0C0C:00 [ 44.993853] call input3+ returned 0 after 3 usecs [ 44.993854] calling input4+ @ 3678, parent: LNXPWRBN:00 [ 44.993858] call input4+ returned 0 after 3 usecs [ 44.993860] calling controlD64+ @ 3678, parent: 0000:00:02.0 [ 44.993860] call controlD64+ returned 0 after 0 usecs [ 44.993861] calling card0+ @ 3678, parent: 0000:00:02.0 [ 44.993862] call card0+ returned 0 after 0 usecs [ 44.993863] calling i2c-0+ @ 3678, parent: 0000:00:02.0 [ 44.993864] call i2c-0+ returned 0 after 0 usecs [ 44.993864] calling i2c-1+ @ 3678, parent: 0000:00:02.0 [ 44.993865] call i2c-1+ returned 0 after 0 usecs [ 44.993866] calling i2c-2+ @ 3678, parent: 0000:00:02.0 [ 44.993866] call i2c-2+ returned 0 after 0 usecs [ 44.993867] calling i2c-3+ @ 3678, parent: 0000:00:02.0 [ 44.993867] call i2c-3+ returned 0 after 0 usecs [ 44.993868] calling i2c-4+ @ 3678, parent: 0000:00:02.0 [ 44.993868] call i2c-4+ returned 0 after 0 usecs [ 44.993869] calling i2c-5+ @ 3678, parent: 0000:00:02.0 [ 44.993870] call i2c-5+ returned 0 after 0 usecs [ 44.993870] calling card0-VGA-1+ @ 3678, parent: card0 [ 44.993871] call card0-VGA-1+ returned 0 after 0 usecs [ 44.993872] calling card0-DP-1+ @ 3678, parent: card0 [ 44.993872] call card0-DP-1+ returned 0 after 0 usecs [ 44.993873] calling i2c-6+ @ 3678, parent: card0-DP-1 [ 44.993874] call i2c-6+ returned 0 after 0 usecs [ 44.993875] calling card0-HDMI-A-1+ @ 3678, parent: card0 [ 44.993876] call card0-HDMI-A-1+ returned 0 after 0 usecs [ 44.993876] calling card0-DP-2+ @ 3678, parent: card0 [ 44.993877] call card0-DP-2+ returned 0 after 0 usecs [ 44.993878] calling i2c-7+ @ 3678, parent: card0-DP-2 [ 44.993878] call i2c-7+ returned 0 after 0 usecs [ 44.993879] calling card0-HDMI-A-2+ @ 3678, parent: card0 [ 44.993880] call card0-HDMI-A-2+ returned 0 after 0 usecs [ 44.993881] calling acpi_video0+ @ 3678, parent: 0000:00:02.0 [ 44.993882] call acpi_video0+ returned 0 after 0 usecs [ 44.993884] calling acpi_video1+ @ 3678, parent: 0000:00:02.0 [ 44.993884] call acpi_video1+ returned 0 after 0 usecs [ 44.993885] calling acpi_video2+ @ 3678, parent: 0000:00:02.0 [ 44.993886] call acpi_video2+ returned 0 after 0 usecs [ 44.993886] calling acpi_video3+ @ 3678, parent: 0000:00:02.0 [ 44.993887] call acpi_video3+ returned 0 after 0 usecs [ 44.993888] calling acpi_video4+ @ 3678, parent: 0000:00:02.0 [ 44.993888] call acpi_video4+ returned 0 after 0 usecs [ 44.993889] calling acpi_video5+ @ 3678, parent: 0000:00:02.0 [ 44.993890] call acpi_video5+ returned 0 after 0 usecs [ 44.993891] calling acpi_video6+ @ 3678, parent: 0000:00:02.0 [ 44.993891] call acpi_video6+ returned 0 after 0 usecs [ 44.993892] calling acpi_video7+ @ 3678, parent: 0000:00:02.0 [ 44.993893] call acpi_video7+ returned 0 after 0 usecs [ 44.993894] calling acpi_video8+ @ 3678, parent: 0000:00:02.0 [ 44.993894] call acpi_video8+ returned 0 after 0 usecs [ 44.993895] calling acpi_video9+ @ 3678, parent: 0000:00:02.0 [ 44.993895] call acpi_video9+ returned 0 after 0 usecs [ 44.993896] calling acpi_video10+ @ 3678, parent: 0000:00:02.0 [ 44.993897] call acpi_video10+ returned 0 after 0 usecs [ 44.993898] calling input5+ @ 3678, parent: LNXVIDEO:00 [ 44.993902] call input5+ returned 0 after 3 usecs [ 44.993904] calling input6+ @ 3678, parent: pcspkr [ 44.993920] call input6+ returned 0 after 14 usecs [ 44.993922] calling iTCO_wdt+ @ 3678, parent: 0000:00:1f.0 [ 44.993922] call iTCO_wdt+ returned 0 after 0 usecs [ 44.993923] calling microcode+ @ 3678, parent: platform [ 44.993924] call microcode+ returned 0 after 0 usecs [ 44.993926] calling coretemp.0+ @ 3678, parent: platform [ 44.993927] call coretemp.0+ returned 0 after 0 usecs [ 44.993932] PM: resume of devices complete after 859.518 msecs [ 44.994431] PM: Finishing wakeup. [ 44.994432] Restarting tasks ... done. [ 44.994585] video LNXVIDEO:00: Restoring backlight state [ 44.994679] [drm:asle_set_backlight], bclp = 0x800000ff [ 44.994689] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 44.994760] [drm:asle_set_backlight], bclp = 0x800000ff [ 44.994764] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 44.994839] [drm:asle_set_backlight], bclp = 0x800000ff [ 44.994842] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 44.994906] [drm:asle_set_backlight], bclp = 0x800000ff [ 44.994909] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 44.994960] [drm:asle_set_backlight], bclp = 0x800000ff [ 44.994964] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 44.995011] [drm:asle_set_backlight], bclp = 0x800000ff [ 44.995015] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 44.995063] [drm:asle_set_backlight], bclp = 0x800000ff [ 44.995066] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 44.995115] [drm:asle_set_backlight], bclp = 0x800000ff [ 44.995118] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 45.849746] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 45.849752] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 45.906173] e1000e: eth0 NIC Link is Down [ 45.914164] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 45.918025] [drm:gen6_enable_rps], Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz [ 47.515035] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 47.515040] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO