[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-rc6_nightlytop_92d7d0_20130620_+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #4263 SMP Thu Jun 20 12:07:27 CST 2013 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2013_06_20/nightlytop/92d7d01e43d53312eb276ebc6e261573ee5a12fd/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2013_06_20/nightlytop/92d7d01e43d53312eb276ebc6e261573ee5a12fd/modules_x86_64/lib/modules/3.10.0-rc6_nightlytop_92d7d0_20130620_+ [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000086caffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000086cb0000-0x00000000880affff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000880b0000-0x000000008c6befff] usable [ 0.000000] BIOS-e820: [mem 0x000000008c6bf000-0x000000008cebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008cebf000-0x000000008cfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008cfbf000-0x000000008cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008cffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000008d000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire V3-772/VA70_HW, BIOS V1.04 04/19/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FF8000000 write-back [ 0.000000] 2 base 0088000000 mask 7FFC000000 write-back [ 0.000000] 3 base 008C000000 mask 7FFF000000 write-back [ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect [ 0.000000] 5 base 0100000000 mask 7F80000000 write-back [ 0.000000] 6 base 015F600000 mask 7FFFE00000 uncachable [ 0.000000] 7 base 015F800000 mask 7FFF800000 uncachable [ 0.000000] 8 base 0160000000 mask 7FE0000000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x8d000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x05878000, 0x05878fff] PGTABLE [ 0.000000] BRK [0x05879000, 0x05879fff] PGTABLE [ 0.000000] BRK [0x0587a000, 0x0587afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff] [ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M [ 0.000000] BRK [0x0587b000, 0x0587bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff] [ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x15bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x86caffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0x86bfffff] page 2M [ 0.000000] [mem 0x86c00000-0x86caffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x880b0000-0x8c6befff] [ 0.000000] [mem 0x880b0000-0x881fffff] page 4k [ 0.000000] [mem 0x88200000-0x8c5fffff] page 2M [ 0.000000] [mem 0x8c600000-0x8c6befff] page 4k [ 0.000000] BRK [0x0587c000, 0x0587cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x8cfff000-0x8cffffff] [ 0.000000] [mem 0x8cfff000-0x8cffffff] page 4k [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 000000008cffe210 000BC (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 000000008cff5000 0010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 000000008cfde000 130A4 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 000000008cfaf000 00040 [ 0.000000] ACPI: ECDT 000000008cffd000 000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: UEFI 000000008cffc000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 000000008cffa000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MSDM 000000008cff9000 00055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 000000008cff8000 00538 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 000000008cff7000 00ABA (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: ASF! 000000008cff6000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 000000008cff4000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 000000008cff3000 0008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 000000008cff2000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 000000008cfdc000 013A4 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: SSDT 000000008cfdb000 00172 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: BOOT 000000008cfda000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 000000008cfd9000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DBGP 000000008cfd8000 00034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 000000008cfd4000 0321A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 000000008cfcf000 03618 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: DMAR 000000008cfd3000 00090 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff] [ 0.000000] NODE_DATA [mem 0x15f5f8000-0x15f5fbfff] [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b000000-ffff88015ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x15f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x86caffff] [ 0.000000] node 0: [mem 0x880b0000-0x8c6befff] [ 0.000000] node 0: [mem 0x8cfff000-0x8cffffff] [ 0.000000] node 0: [mem 0x100000000-0x15f5fffff] [ 0.000000] On node 0 totalpages: 960604 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8843 pages used for memmap [ 0.000000] DMA32 zone: 565952 pages, LIFO batch:31 [ 0.000000] Normal zone: 6104 pages used for memmap [ 0.000000] Normal zone: 390656 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000086cb0000 - 00000000880b0000 [ 0.000000] PM: Registered nosave memory: 000000008c6bf000 - 000000008cebf000 [ 0.000000] PM: Registered nosave memory: 000000008cebf000 - 000000008cfbf000 [ 0.000000] PM: Registered nosave memory: 000000008cfbf000 - 000000008cfff000 [ 0.000000] PM: Registered nosave memory: 000000008d000000 - 000000009fa00000 [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb10000 [ 0.000000] PM: Registered nosave memory: 00000000feb10000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88015f200000 s74368 r8192 d23936 u262144 [ 0.000000] pcpu-alloc: s74368 r8192 d23936 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 945572 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2013_06_20/nightlytop/92d7d01e43d53312eb276ebc6e261573ee5a12fd/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2013_06_20/nightlytop/92d7d01e43d53312eb276ebc6e261573ee5a12fd/modules_x86_64/lib/modules/3.10.0-rc6_nightlytop_92d7d0_20130620_+ [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3639640k/5756928k available (7089k kernel code, 1914512k absent, 202776k reserved, 4124k data, 62368k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 2194.927 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.85 BogoMIPS (lpj=2194927) [ 0.000217] pid_max: default: 32768 minimum: 301 [ 0.000340] Security Framework initialized [ 0.000662] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001770] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002298] Mount-cache hash table entries: 256 [ 0.002571] CPU: Physical Processor ID: 0 [ 0.002683] CPU: Processor Core ID: 0 [ 0.003740] mce: CPU supports 9 MCE banks [ 0.003858] CPU0: Thermal monitoring enabled (TM1) [ 0.003975] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.003975] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 [ 0.003975] tlb_flushall_shift: 6 [ 0.004327] Freeing SMP alternatives: 32k freed [ 0.004436] ACPI: Core revision 20130328 [ 0.013482] ACPI: All ACPI Tables successfully acquired [ 0.014113] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024234] smpboot: CPU0: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (fam: 06, model: 3c, stepping: 03) [ 0.024530] TSC deadline timer enabled [ 0.024537] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. [ 0.024830] ... version: 3 [ 0.024934] ... bit width: 48 [ 0.025039] ... generic registers: 4 [ 0.025144] ... value mask: 0000ffffffffffff [ 0.025252] ... max period: 000000007fffffff [ 0.025360] ... fixed-purpose events: 3 [ 0.025464] ... event mask: 000000070000000f [ 0.037535] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.037535] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.025710] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK [ 0.126595] Brought up 8 CPUs [ 0.126700] smpboot: Total of 8 processors activated (35118.83 BogoMIPS) [ 0.133723] devtmpfs: initialized [ 0.134048] PM: Registering ACPI NVS region [mem 0x8cebf000-0x8cfbefff] (1048576 bytes) [ 0.136013] xor: automatically using best checksumming function: [ 0.145930] avx : 22316.000 MB/sec [ 0.146054] RTC time: 13:43:30, date: 06/21/13 [ 0.146191] NET: Registered protocol family 16 [ 0.146630] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.146799] ACPI: bus type PCI registered [ 0.146996] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.147170] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.155774] PCI: Using configuration type 1 for base access [ 0.156225] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.156334] mtrr: probably your BIOS does not setup all CPUs. [ 0.156441] mtrr: corrected configuration. [ 0.163366] bio: create slab at 0 [ 0.180001] raid6: sse2x1 7066 MB/s [ 0.197032] raid6: sse2x2 8773 MB/s [ 0.214067] raid6: sse2x4 10328 MB/s [ 0.231100] raid6: avx2x1 13839 MB/s [ 0.248129] raid6: avx2x2 15625 MB/s [ 0.265160] raid6: avx2x4 18449 MB/s [ 0.265264] raid6: using algorithm avx2x4 (18449 MB/s) [ 0.265372] raid6: using avx2x2 recovery algorithm [ 0.265529] ACPI: Added _OSI(Module Device) [ 0.265635] ACPI: Added _OSI(Processor Device) [ 0.265741] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.265848] ACPI: Added _OSI(Processor Aggregator Device) [ 0.267856] ACPI: EC: EC description table is found, configuring boot EC [ 0.269880] ACPI: Executed 1 blocks of module-level executable AML code [ 0.274229] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.275498] ACPI: SSDT 000000008ce58c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) [ 0.276227] ACPI: Dynamic OEM Table Load: [ 0.276410] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) [ 0.283437] ACPI: SSDT 000000008ce58618 005AA (v01 PmRef ApIst 00003000 INTL 20120518) [ 0.284226] ACPI: Dynamic OEM Table Load: [ 0.284410] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120518) [ 0.289329] ACPI: SSDT 000000008ce57d98 00119 (v01 PmRef ApCst 00003000 INTL 20120518) [ 0.290046] ACPI: Dynamic OEM Table Load: [ 0.290229] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120518) [ 0.296414] ACPI: Interpreter enabled [ 0.296524] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.296779] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.297044] ACPI: (supports S0 S3 S4 S5) [ 0.297148] ACPI: Using IOAPIC for interrupt routing [ 0.297294] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.315663] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.316312] PCI host bridge to bus 0000:00 [ 0.316418] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.316528] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.316642] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.316752] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.316863] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.316981] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.317137] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.317170] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.317272] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.317424] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.317435] pci 0000:00:02.0: reg 10: [mem 0xd3000000-0xd33fffff 64bit] [ 0.317442] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.317446] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] [ 0.317591] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.317599] pci 0000:00:03.0: reg 10: [mem 0xd3610000-0xd3613fff 64bit] [ 0.317770] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.317788] pci 0000:00:14.0: reg 10: [mem 0xd3600000-0xd360ffff 64bit] [ 0.317846] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.317867] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.318016] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.318035] pci 0000:00:16.0: reg 10: [mem 0xd3618000-0xd361800f 64bit] [ 0.318096] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.318241] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.318261] pci 0000:00:1a.0: reg 10: [mem 0xd361d000-0xd361d3ff] [ 0.318344] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.318376] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.318525] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.318539] pci 0000:00:1b.0: reg 10: [mem 0xd3614000-0xd3617fff 64bit] [ 0.318600] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.318624] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.318770] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.318832] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.318866] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.319013] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.319075] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.319124] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.319270] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.319331] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.319389] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.319542] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.319561] pci 0000:00:1d.0: reg 10: [mem 0xd361c000-0xd361c3ff] [ 0.319645] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.319675] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.319828] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100 [ 0.319973] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.319988] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f] [ 0.319996] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097] [ 0.320003] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087] [ 0.320010] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093] [ 0.320017] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] [ 0.320025] pci 0000:00:1f.2: reg 24: [mem 0xd361b000-0xd361b7ff] [ 0.320060] pci 0000:00:1f.2: PME# supported from D3hot [ 0.320181] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.320195] pci 0000:00:1f.3: reg 10: [mem 0xd3619000-0xd36190ff 64bit] [ 0.320214] pci 0000:00:1f.3: reg 20: [io 0x5040-0x505f] [ 0.320391] pci 0000:01:00.0: [10de:11e3] type 00 class 0x030200 [ 0.320399] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] [ 0.320407] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.320416] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.320421] pci 0000:01:00.0: reg 24: [io 0x4000-0x407f] [ 0.320428] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.320465] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.321816] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.321924] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.321927] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff] [ 0.321930] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.322005] pci 0000:07:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.322022] pci 0000:07:00.0: reg 10: [mem 0xd1000000-0xd1000fff] [ 0.322143] pci 0000:07:00.0: supports D1 D2 [ 0.322145] pci 0000:07:00.0: PME# supported from D1 D2 D3hot [ 0.322168] pci 0000:07:00.0: System wakeup disabled by ACPI [ 0.323830] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] [ 0.323939] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.323943] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd1ffffff] [ 0.323948] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.324022] pci 0000:0d:00.0: [168c:0034] type 00 class 0x028000 [ 0.324044] pci 0000:0d:00.0: reg 10: [mem 0xd3500000-0xd357ffff 64bit] [ 0.324097] pci 0000:0d:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.324149] pci 0000:0d:00.0: supports D1 D2 [ 0.324151] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.324173] pci 0000:0d:00.0: System wakeup disabled by ACPI [ 0.325836] pci 0000:00:1c.2: PCI bridge to [bus 0d] [ 0.325948] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd35fffff] [ 0.325953] pci 0000:00:1c.2: bridge window [mem 0x9fb00000-0x9fbfffff 64bit pref] [ 0.326063] pci 0000:0e:00.0: [14e4:1692] type 00 class 0x020000 [ 0.326087] pci 0000:0e:00.0: reg 10: [mem 0xd3400000-0xd340ffff 64bit] [ 0.326143] pci 0000:0e:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.326212] pci 0000:0e:00.0: PME# supported from D3hot D3cold [ 0.326238] pci 0000:0e:00.0: System wakeup disabled by ACPI [ 0.327877] pci 0000:00:1c.3: PCI bridge to [bus 0e] [ 0.327987] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff] [ 0.328082] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.328523] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.329320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.329907] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.330628] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.331208] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.331787] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.332506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.333225] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.333807] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.334798] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.334992] acpi root: \_SB_.PCI0 notify handler is installed [ 0.335053] Found 1 acpi root devices [ 0.335093] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.335351] ACPI: No dock devices found. [ 0.335529] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.335703] vgaarb: loaded [ 0.335805] vgaarb: bridge control possible 0000:00:02.0 [ 0.336012] SCSI subsystem initialized [ 0.336116] ACPI: bus type ATA registered [ 0.336295] libata version 3.00 loaded. [ 0.336368] ACPI: bus type USB registered [ 0.336513] usbcore: registered new interface driver usbfs [ 0.336642] usbcore: registered new interface driver hub [ 0.336776] usbcore: registered new device driver usb [ 0.336954] pps_core: LinuxPPS API ver. 1 registered [ 0.337064] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.337254] PTP clock support registered [ 0.337458] PCI: Using ACPI for IRQ routing [ 0.343266] PCI: pci_cache_line_size set to 64 bytes [ 0.343371] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.343372] e820: reserve RAM buffer [mem 0x86cb0000-0x87ffffff] [ 0.343374] e820: reserve RAM buffer [mem 0x8c6bf000-0x8fffffff] [ 0.343375] e820: reserve RAM buffer [mem 0x8d000000-0x8fffffff] [ 0.343377] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff] [ 0.343501] NetLabel: Initializing [ 0.343605] NetLabel: domain hash size = 128 [ 0.343711] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.343825] NetLabel: unlabeled traffic allowed by default [ 0.344002] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.344472] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.346595] Switching to clocksource hpet [ 0.346758] pnp: PnP ACPI init [ 0.346864] ACPI: bus type PNP registered [ 0.346987] pnp 00:00: [dma 4] [ 0.347030] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.347071] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.347177] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.347233] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.347287] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.347397] system 00:04: [io 0xffff] has been reserved [ 0.347505] system 00:04: [io 0xffff] has been reserved [ 0.347621] system 00:04: [io 0xffff] has been reserved [ 0.347736] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.347847] system 00:04: [io 0x0800-0x08fe] has been reserved [ 0.347956] system 00:04: [io 0x0900-0x09fe] has been reserved [ 0.348066] system 00:04: [io 0x0a00-0x0afe] has been reserved [ 0.348174] system 00:04: [io 0x0b00-0x0bfe] has been reserved [ 0.348283] system 00:04: [io 0x1800-0x18fe] has been reserved [ 0.348393] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.348504] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348544] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.348604] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.348719] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.348773] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.348819] pnp 00:08: Plug and Play ACPI device, IDs ETD050a SYN1b00 SYN0002 PNP0f13 (active) [ 0.348925] pnp 00:09: disabling [mem 0xffffffff-0x100000ffe] because it overlaps 0000:0d:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref] [ 0.349139] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.349250] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.349362] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.349473] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.349583] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.349695] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.349812] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.349922] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.350034] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.350146] system 00:09: [mem 0x9fa10000-0x9fa10fff] has been reserved [ 0.350257] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.350727] pnp: PnP ACPI: found 10 devices [ 0.350832] ACPI: bus type PNP unregistered [ 0.358575] pci 0000:0d:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.358781] pci 0000:00:1c.3: BAR 9: assigned [mem 0x9fc00000-0x9fcfffff pref] [ 0.358951] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref] [ 0.359121] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.359229] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.359342] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff] [ 0.359453] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.359625] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] [ 0.359737] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.359851] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd1ffffff] [ 0.359964] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.360139] pci 0000:0d:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref] [ 0.360308] pci 0000:00:1c.2: PCI bridge to [bus 0d] [ 0.360418] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd35fffff] [ 0.360530] pci 0000:00:1c.2: bridge window [mem 0x9fb00000-0x9fbfffff 64bit pref] [ 0.360705] pci 0000:0e:00.0: BAR 6: assigned [mem 0x9fc00000-0x9fc0ffff pref] [ 0.360878] pci 0000:00:1c.3: PCI bridge to [bus 0e] [ 0.360988] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff] [ 0.361101] pci 0000:00:1c.3: bridge window [mem 0x9fc00000-0x9fcfffff pref] [ 0.361508] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.361510] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.361512] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.361514] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.361516] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.361517] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff] [ 0.361519] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.361521] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff] [ 0.361522] pci_bus 0000:07: resource 1 [mem 0xd1000000-0xd1ffffff] [ 0.361524] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.361525] pci_bus 0000:0d: resource 1 [mem 0xd3500000-0xd35fffff] [ 0.361527] pci_bus 0000:0d: resource 2 [mem 0x9fb00000-0x9fbfffff 64bit pref] [ 0.361529] pci_bus 0000:0e: resource 1 [mem 0xd3400000-0xd34fffff] [ 0.361530] pci_bus 0000:0e: resource 2 [mem 0x9fc00000-0x9fcfffff pref] [ 0.361551] NET: Registered protocol family 2 [ 0.361800] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.362056] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.362229] TCP: Hash tables configured (established 32768 bind 32768) [ 0.362352] TCP: reno registered [ 0.362460] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.362583] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.364439] NET: Registered protocol family 1 [ 0.364603] RPC: Registered named UNIX socket transport module. [ 0.364711] RPC: Registered udp transport module. [ 0.364824] RPC: Registered tcp transport module. [ 0.364931] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.365045] pci 0000:00:02.0: Boot video device [ 0.365485] PCI: CLS 64 bytes, default 64 [ 0.403535] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.403650] software IO TLB [mem 0x886bf000-0x8c6bf000] (64MB) mapped at [ffff8800886bf000-ffff88008c6befff] [ 0.403916] Simple Boot Flag at 0x44 set to 0x1 [ 0.405098] audit: initializing netlink socket (disabled) [ 0.405212] type=2000 audit(1371822210.386:1): initialized [ 0.428976] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.431468] VFS: Disk quotas dquot_6.5.2 [ 0.431625] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.432589] NFS: Registering the id_resolver key type [ 0.432705] Key type id_resolver registered [ 0.432820] Key type id_legacy registered [ 0.432926] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.433220] fuse init (API version 7.22) [ 0.433677] bio: create slab at 1 [ 0.433946] Btrfs loaded [ 0.434050] msgmni has been set to 7108 [ 0.434430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.434601] io scheduler noop registered [ 0.434705] io scheduler deadline registered [ 0.434869] io scheduler cfq registered (default) [ 0.435051] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.435145] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.435245] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.435319] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.435435] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.435831] ACPI: Requesting acpi_cpufreq [ 0.436311] Monitor-Mwait will be used to enter C-1 state [ 0.436316] Monitor-Mwait will be used to enter C-2 state [ 0.436320] ACPI: acpi_idle registered with cpuidle [ 0.441708] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.441829] ACPI: Thermal Zone [THRM] (55 C) [ 0.442008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.442744] Non-volatile memory driver v1.3 [ 0.442866] Linux agpgart interface v0.103 [ 0.444583] brd: module loaded [ 0.444944] Loading iSCSI transport class v2.0-870. [ 0.445511] iscsi: registered transport (tcp) [ 0.445735] Adaptec aacraid driver 1.2-0[30200]-ms [ 0.445931] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.446171] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k. [ 0.446403] iscsi: registered transport (qla4xxx) [ 0.446540] QLogic iSCSI HBA Driver [ 0.446702] DC390: clustering now enabled by default. If you get problems load [ 0.446882] with "disable_clustering=1" and report to maintainers [ 0.447053] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.447249] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.447385] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.447561] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.447722] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.447722] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.448073] SCSI Media Changer driver v0.25 [ 0.448240] ahci 0000:00:1f.2: version 3.0 [ 0.448334] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.448374] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 impl SATA mode [ 0.448545] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.448718] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.450265] scsi0 : ahci [ 0.450461] scsi1 : ahci [ 0.450646] scsi2 : ahci [ 0.450839] scsi3 : ahci [ 0.451009] ata1: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b100 irq 44 [ 0.451177] ata2: DUMMY [ 0.451279] ata3: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b200 irq 44 [ 0.451447] ata4: DUMMY [ 0.453395] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012) [ 0.453594] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 0.453833] tg3.c:v3.132 (May 21, 2013) [ 0.473585] libphy: tg3 mdio bus: probed [ 0.478542] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 7c:05:07:33:14:f5 [ 0.478718] tg3 0000:0e:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=e00:01) [ 0.478902] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 0.479072] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 0.479262] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.479371] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.479513] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.479623] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.479763] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.479881] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 0.480024] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k [ 0.480135] igb: Copyright (c) 2007-2013 Intel Corporation. [ 0.480306] usbcore: registered new interface driver zd1201 [ 0.480441] usbcore: registered new interface driver catc [ 0.480577] usbcore: registered new interface driver kaweth [ 0.480685] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.480886] usbcore: registered new interface driver pegasus [ 0.481021] usbcore: registered new interface driver rtl8150 [ 0.481159] usbcore: registered new interface driver asix [ 0.481294] usbcore: registered new interface driver ax88179_178a [ 0.481430] usbcore: registered new interface driver cdc_ether [ 0.481564] usbcore: registered new interface driver dm9601 [ 0.481701] usbcore: registered new interface driver gl620a [ 0.481837] usbcore: registered new interface driver net1080 [ 0.481980] usbcore: registered new interface driver plusb [ 0.482116] usbcore: registered new interface driver rndis_host [ 0.482254] usbcore: registered new interface driver cdc_subset [ 0.482390] usbcore: registered new interface driver zaurus [ 0.482526] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.482727] usbcore: registered new interface driver cdc_ncm [ 0.482989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.483099] ehci-pci: EHCI PCI platform driver [ 0.483286] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.483294] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.483449] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.483628] ehci-pci 0000:00:1a.0: debug port 2 [ 0.487644] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.487657] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd361d000 [ 0.492881] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.493001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.493112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.493281] usb usb1: Product: EHCI Host Controller [ 0.493388] usb usb1: Manufacturer: Linux 3.10.0-rc6_nightlytop_92d7d0_20130620_+ ehci_hcd [ 0.493559] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.493778] hub 1-0:1.0: USB hub found [ 0.493893] hub 1-0:1.0: 2 ports detected [ 0.494130] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.494137] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.494294] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.494474] ehci-pci 0000:00:1d.0: debug port 2 [ 0.498490] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.498501] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd361c000 [ 0.503890] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.504006] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.504119] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.504288] usb usb2: Product: EHCI Host Controller [ 0.504395] usb usb2: Manufacturer: Linux 3.10.0-rc6_nightlytop_92d7d0_20130620_+ ehci_hcd [ 0.504565] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.504774] hub 2-0:1.0: USB hub found [ 0.504887] hub 2-0:1.0: 2 ports detected [ 0.505102] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.505241] uhci_hcd: USB Universal Host Controller Interface driver [ 0.505465] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.505468] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.505622] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.505879] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.505895] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 0.505930] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.506041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.506211] usb usb3: Product: xHCI Host Controller [ 0.506317] usb usb3: Manufacturer: Linux 3.10.0-rc6_nightlytop_92d7d0_20130620_+ xhci_hcd [ 0.506488] usb usb3: SerialNumber: 0000:00:14.0 [ 0.506667] xHCI xhci_add_endpoint called for root hub [ 0.506668] xHCI xhci_check_bandwidth called for root hub [ 0.506703] hub 3-0:1.0: USB hub found [ 0.506820] hub 3-0:1.0: 14 ports detected [ 0.507785] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.507946] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.508132] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.508243] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.508412] usb usb4: Product: xHCI Host Controller [ 0.508519] usb usb4: Manufacturer: Linux 3.10.0-rc6_nightlytop_92d7d0_20130620_+ xhci_hcd [ 0.508690] usb usb4: SerialNumber: 0000:00:14.0 [ 0.508860] xHCI xhci_add_endpoint called for root hub [ 0.508861] xHCI xhci_check_bandwidth called for root hub [ 0.508903] hub 4-0:1.0: USB hub found [ 0.509015] hub 4-0:1.0: 4 ports detected [ 0.515971] usbcore: registered new interface driver usb-storage [ 0.516153] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.519835] i8042: Detected active multiplexing controller, rev 1.1 [ 0.521694] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.521803] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.521933] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.522058] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.522185] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.522389] mousedev: PS/2 mouse device common for all mice [ 0.522602] rtc_cmos 00:05: RTC can wake from S4 [ 0.522836] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.522977] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.524932] cpuidle: using governor ladder [ 0.525132] cpuidle: using governor menu [ 0.525302] hidraw: raw HID events driver (C) Jiri Kosina [ 0.526096] usbcore: registered new interface driver usbhid [ 0.526208] usbhid: USB HID core driver [ 0.526461] TCP: cubic registered [ 0.526571] Initializing XFRM netlink socket [ 0.526680] NET: Registered protocol family 17 [ 0.526800] Key type dns_resolver registered [ 0.527533] PM: Hibernation image not present or could not be loaded. [ 0.527541] registered taskstats version 1 [ 0.528066] Magic number: 1:640:736 [ 0.528247] Warning: unable to open an initial console. [ 0.529618] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.545612] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 0.545788] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 0.745345] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 0.745550] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 0.756198] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.756327] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.758324] ata1.00: ATA-8: WDC WD2500BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 0.758439] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 0.759726] ata3.00: ATAPI: HL-DT-ST DVDRAM GT90N, 1.00, max UDMA/133 [ 0.760586] ata1.00: configured for UDMA/133 [ 0.760858] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BPVT-2 01.0 PQ: 0 ANSI: 5 [ 0.761236] ata3.00: configured for UDMA/133 [ 0.761532] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.761728] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.761839] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.762013] sd 0:0:0:0: [sda] Write Protect is off [ 0.762120] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.762140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.771887] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT90N 1.00 PQ: 0 ANSI: 5 [ 0.781836] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.782009] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.782485] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.782675] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.796241] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.910803] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 0.910917] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.911572] hub 1-1:1.0: USB hub found [ 0.911728] hub 1-1:1.0: 6 ports detected [ 0.945622] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 0.945800] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.014406] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.129022] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.129137] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.129643] hub 2-1:1.0: USB hub found [ 1.129821] hub 2-1:1.0: 8 ports detected [ 1.145797] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.145974] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.283727] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 1.350709] usb 3-5: New USB device found, idVendor=04f2, idProduct=b374 [ 1.350843] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.350955] usb 3-5: Product: HD WebCam [ 1.351060] usb 3-5: Manufacturer: SunplusIT INC. [ 1.355938] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.356116] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.406840] tsc: Refined TSC clocksource calibration: 2194.917 MHz [ 1.406955] Switching to clocksource tsc [ 1.556234] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.556412] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.574015] usb 3-10: new full-speed USB device number 3 using xhci_hcd [ 1.586689] usb 3-10: string descriptor 0 malformed (err = -61), defaulting to 0x0409 [ 1.588617] usb 3-10: New USB device found, idVendor=0489, idProduct=e04e [ 1.588732] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.443574] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input1 [ 2.906907] sda: sda1 sda2 [ 2.907435] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.908270] Freeing unused kernel memory: 62368k freed [ 2.945202] dracut: dracut-018-35.git20120510.fc17 [ 2.969164] udevd[1315]: starting version 182 [ 2.981553] [drm] Initialized drm 1.1.0 20060810 [ 2.982088] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2 [ 2.982315] ACPI: Power Button [PWRB] [ 2.982856] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input3 [ 2.983091] ACPI: Sleep Button [SLPB] [ 2.983272] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 2.984436] ACPI: Lid Switch [LID] [ 2.984649] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 2.984994] ACPI: Power Button [PWRF] [ 2.987275] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_force_wake,has_fbc,has_hotplug,has_bsd_ring,has_blt_ring,has_vebox_ring,has_llc,has_ddi,has_fpga_dbg, [ 2.987473] [drm] Memory usable by graphics device = 2048M [ 2.987585] [drm:i915_gem_gtt_init], GMADR size = 256M [ 2.987587] [drm:i915_gem_gtt_init], GTT stolen size = 128M [ 2.987592] i915 0000:00:02.0: setting latency timer to 64 [ 2.997119] [drm:intel_detect_pch], Found LynxPoint PCH [ 2.997330] [drm:intel_opregion_setup], graphic opregion physical addr: 0x8cfa9018 [ 2.997335] [drm:intel_opregion_setup], Public ACPI methods supported [ 2.997336] [drm:intel_opregion_setup], SWSCI supported [ 2.997337] [drm:intel_opregion_setup], ASLE supported [ 2.997374] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 2.997381] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.997492] [drm] Driver supports precise vblank timestamp query. [ 2.997601] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 2.997603] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL d [ 2.997605] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.997607] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 2.997610] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 2.997612] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 0 101700 1600 1648 1680 1824 900 903 908 928 0x8 0xa [ 2.997614] [drm:parse_lfp_panel_data], VBT initial LVDS value 30033c [ 2.997616] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 2.997618] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.997620] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 2.997665] [drm:i915_gem_init_stolen], found 134217728 bytes of stolen memory at 97a00000 [ 2.997694] [drm:intel_modeset_init], 3 display pipes available. [ 2.997704] [drm:intel_ddi_pll_init], CDCLK running at 450000KHz [ 2.997706] [drm:intel_shared_dpll_init], 0 shared PLLs initialized [ 2.997709] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.998245] [drm:intel_dp_init_connector], Adding eDP connector on port A [ 2.998292] [drm:intel_dp_i2c_init], i2c_init DPDDC-A [ 2.998294] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on [ 2.998300] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 2.998440] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 2.998697] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 2.998749] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1 [ 2.998757] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 2.998759] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 2.998761] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.998762] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 2.998764] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on [ 2.998766] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on [ 2.999026] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 01 00 00 01 00 02 00 00 00 00 0b 00 [ 2.999028] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1 [ 2.999036] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d0000a, PP_OFF 0x1f407d0, PP_DIV 0x186906 [ 2.999038] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on [ 2.999041] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on [ 2.999719] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.018722] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.018730] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 3.018732] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1 [ 3.018734] [drm:intel_panel_get_backlight], get backlight PWM = 5273 [ 3.018737] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273 [ 3.018787] [drm:intel_dp_init_connector], Adding DP connector on port C [ 3.018851] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 3.021693] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 3.021698] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 3.024537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 3.024541] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 3.080469] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000] [ 3.082071] [drm:init_status_page], render ring hws offset: 0x00000000 [ 3.082119] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 3.082124] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 3.082165] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 3.082204] [drm:init_status_page], video enhancement ring hws offset: 0x00064000 [ 3.082255] [drm:create_default_context], Default HW context loaded [ 3.082256] [drm:i915_gem_context_init], HW context support initialized [ 3.082272] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode [ 3.082281] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode [ 3.082289] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode [ 3.082298] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode [ 3.082306] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode [ 3.082370] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 3.082372] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled [ 3.082374] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled [ 3.082376] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000 [ 3.082379] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0 [ 3.082381] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: enabled, pipe=0 [ 3.082383] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0 [ 3.082385] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: enabled [ 3.082387] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled [ 3.082389] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-1] hw state readout: disabled [ 3.082391] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-1] hw state readout: disabled [ 3.082393] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 3.082395] [drm:intel_dump_pipe_config], cpu_transcoder: P [ 3.082396] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 3.082397] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.082399] [drm:intel_dump_pipe_config], requested mode: [ 3.082400] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 3.082403] [drm:intel_dump_pipe_config], adjusted mode: [ 3.082404] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 3.082406] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.082408] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x06400384 [ 3.082409] [drm:intel_dump_pipe_config], ips: 0 [ 3.082411] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 3.082412] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 3.082413] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 3.082415] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.082416] [drm:intel_dump_pipe_config], requested mode: [ 3.082417] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.082419] [drm:intel_dump_pipe_config], adjusted mode: [ 3.082420] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.082422] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.082424] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 3.082425] [drm:intel_dump_pipe_config], ips: 0 [ 3.082427] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C [ 3.082428] [drm:intel_dump_pipe_config], cpu_transcoder: C [ 3.082429] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 3.082430] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.082432] [drm:intel_dump_pipe_config], requested mode: [ 3.082433] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.082435] [drm:intel_dump_pipe_config], adjusted mode: [ 3.082436] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.082438] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.082439] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 3.082440] [drm:intel_dump_pipe_config], ips: 0 [ 3.082442] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1] [ 3.082445] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 3.082449] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 3.082451] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 3.082452] [drm:check_crtc_state], [CRTC:3] [ 3.082455] [drm:check_crtc_state], [CRTC:5] [ 3.082457] [drm:check_crtc_state], [CRTC:7] [ 3.082461] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 3.082469] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] [ 3.082474] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 3.082476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes : [ 3.082478] [drm:drm_mode_debug_printmodeline], Modeline 13:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa [ 3.082481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 3.082483] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 3.092482] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 3.092486] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.092642] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.092647] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.092649] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.092651] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.092983] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.092985] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.092987] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.092989] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 3.092992] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] [ 3.095903] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 3.100351] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 3.104353] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 3.105474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected [ 3.105477] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] [ 3.130289] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 3.155154] [drm:drm_edid_to_eld], ELD monitor HP 2309 [ 3.155156] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 3.155159] [drm:drm_edid_to_eld], ELD size 8, SAD count 1 [ 3.155174] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] probed modes : [ 3.155176] [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 3.155180] [drm:drm_mode_debug_printmodeline], Modeline 44:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 3.155184] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 3.155188] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 3.155191] [drm:drm_mode_debug_printmodeline], Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 3.155194] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.155198] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 3.155202] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 3.155205] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 3.155209] [drm:drm_mode_debug_printmodeline], Modeline 45:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 3.155212] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 3.155216] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.155219] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3.155223] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 3.155226] [drm:drm_mode_debug_printmodeline], Modeline 46:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 3.155229] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 3.155233] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 3.155236] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 3.155240] [drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 3.155243] [drm:drm_setup_crtcs], [ 3.155245] [drm:drm_enable_connectors], connector 12 enabled? yes [ 3.155247] [drm:drm_enable_connectors], connector 9 enabled? no [ 3.155249] [drm:drm_enable_connectors], connector 20 enabled? no [ 3.155251] [drm:drm_enable_connectors], connector 21 enabled? yes [ 3.155253] [drm:drm_target_preferred], looking for cmdline mode on connector 12 [ 3.155255] [drm:drm_target_preferred], looking for preferred mode on connector 12 [ 3.155257] [drm:drm_target_preferred], found mode 1600x900 [ 3.155258] [drm:drm_target_preferred], looking for cmdline mode on connector 21 [ 3.155260] [drm:drm_target_preferred], looking for preferred mode on connector 21 [ 3.155262] [drm:drm_target_preferred], found mode 1920x1080 [ 3.155263] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 3.155267] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3 [ 3.155269] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5 [ 3.155272] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000 [ 3.155275] [drm:i915_pages_create_for_stolen], offset=0x0, size=8294400 [ 3.156545] [drm:intelfb_create], allocated 1920x1080 fb: 0x00094000, bo ffff880154ca6f00 [ 3.156627] fbcon: inteldrmfb (fb0) is primary device [ 3.157765] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 3.157766] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 3.157767] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 3.157769] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.157771] [drm:drm_mode_debug_printmodeline], Modeline 38:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa [ 3.157772] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 3.157774] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.157778] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains [ 3.157779] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18 [ 3.157780] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 101700KHz [ 3.157782] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18 [ 3.157783] [drm:intel_dp_compute_config], DP link bw required 183060 available 216000 [ 3.157784] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1 [ 3.157785] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 3.157786] [drm:intel_dump_pipe_config], cpu_transcoder: P [ 3.157787] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1 [ 3.157788] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.157789] [drm:intel_dump_pipe_config], requested mode: [ 3.157791] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa [ 3.157792] [drm:intel_dump_pipe_config], adjusted mode: [ 3.157793] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa [ 3.157794] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.157795] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 3.157796] [drm:intel_dump_pipe_config], ips: 0 [ 3.157797] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 3.157801] [drm:ironlake_edp_backlight_off], [ 3.372767] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on [ 3.372769] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on [ 3.372769] [drm:ironlake_edp_panel_off], Turn eDP power off [ 3.372772] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 3.372775] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000 [ 4.132531] [drm:intel_update_fbc], no output, disabling [ 4.132547] [drm:ironlake_update_plane], Writing base 00094000 00000000 0 0 7680 [ 4.132549] [drm:intel_update_fbc], no output, disabling [ 4.132553] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1600x900] [ 4.132554] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A [ 4.132561] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on [ 4.132563] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 4.132566] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000 [ 4.132571] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 4.132573] [drm:ironlake_edp_panel_vdd_on], eDP was not running [ 4.333726] [drm:ironlake_edp_panel_on], Turn eDP power on [ 4.333728] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 4.333731] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008 [ 4.333735] [drm:ironlake_wait_panel_on], Wait for panel power on [ 4.333737] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b [ 4.542935] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1 [ 4.542941] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 4.594970] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 4.595547] [drm:intel_dp_start_link_train], clock recovery OK [ 4.595548] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 4.596426] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 4.648018] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.700070] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.700072] [drm:intel_update_fbc], fbc set to per-chip default [ 4.700073] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 4.700222] [drm:ironlake_edp_backlight_on], [ 4.702078] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273 [ 4.718090] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1] [ 4.718093] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 4.718095] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 4.718097] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 4.718098] [drm:check_crtc_state], [CRTC:3] [ 4.718101] [drm:check_crtc_state], [CRTC:5] [ 4.718103] [drm:check_crtc_state], [CRTC:7] [ 4.718106] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 4.718107] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 4.718109] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 4.718111] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.718114] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 4.718116] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 4.718118] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.718119] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.718121] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 4.718123] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 4.718125] [drm:connected_sink_compute_bpp], [CONNECTOR:21:HDMI-A-1] checking for sink bpp constrains [ 4.718127] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output [ 4.718128] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI [ 4.718130] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 4.718131] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B [ 4.718132] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 4.718134] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 4.718136] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.718137] [drm:intel_dump_pipe_config], requested mode: [ 4.718140] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 4.718140] [drm:intel_dump_pipe_config], adjusted mode: [ 4.718143] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 4.718145] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.718146] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 4.718147] [drm:intel_dump_pipe_config], ips: 0 [ 4.718150] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B [ 4.720261] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20 [ 4.720293] [drm:ironlake_update_plane], Writing base 00094000 00000000 0 0 7680 [ 4.720296] [drm:intel_update_fbc], fbc set to per-chip default [ 4.720297] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 4.720303] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080] [ 4.720304] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B [ 4.720305] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI [ 4.720306] [drm:intel_ddi_mode_set], HDMI audio: write eld information [ 4.720309] [drm:intel_write_eld], ELD on [CONNECTOR:21:HDMI-A-1], [ENCODER:19:TMDS-19] [ 4.720310] [drm:haswell_write_eld], HDMI: Haswell Audio initialize.... [ 4.720311] [drm:haswell_write_eld], HDMI audio: enable codec [ 4.730145] [drm:intel_enable_rc6], Haswell: only RC6 available [ 4.730146] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4.732104] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz [ 4.772144] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.772146] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x 40 [ 4.772147] [drm:haswell_write_eld], HDMI audio: eld vld status=0x 50 [ 4.772149] [drm:haswell_write_eld], HDMI audio: audio conf: 0x 70fa60 [ 4.772150] [drm:haswell_write_eld], ELD on pipe B [ 4.772154] [drm:haswell_write_eld], port num:0 [ 4.772155] [drm:haswell_write_eld], ELD size 8 [ 4.824195] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.876247] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.876248] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 4.878251] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1] [ 4.878255] [drm:intel_connector_check_state], [CONNECTOR:21:HDMI-A-1] [ 4.878257] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 4.878259] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 4.878260] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 4.878262] [drm:check_crtc_state], [CRTC:3] [ 4.878265] [drm:check_crtc_state], [CRTC:5] [ 4.878268] [drm:check_crtc_state], [CRTC:7] [ 4.878271] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 4.878273] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.878275] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.878294] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 4.878296] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.878298] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.878300] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 4.878302] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.878303] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.885174] Console: switching to colour frame buffer device 200x56 [ 4.885177] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 4.885179] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.885181] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.885182] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 4.885184] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.885186] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.892328] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.892374] i915 0000:00:02.0: registered panic notifier [ 4.892809] i915 0000:00:02.0: More than 8 outputs detected via ACPI [ 4.892897] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 4.893202] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359) [ 4.893296] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015a6ad230), AE_NOT_FOUND (20130328/psparse-537) [ 4.893663] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 4.893801] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3d/LNXVIDEO:00/input/input6 [ 4.899616] [drm:asle_set_backlight], bclp = 0x800000ff [ 4.899621] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273 [ 4.899623] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273 [ 4.899686] [drm:asle_set_backlight], bclp = 0x80000000 [ 4.899689] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273 [ 4.899690] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 4.899818] acpi device:58: registered as cooling_device8 [ 4.899879] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.899970] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 4.900090] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.903180] dracut: Starting plymouth daemon [ 4.909774] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 4.909777] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.909779] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.909781] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 4.909782] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.909783] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.916540] [drm:i915_driver_open], [ 4.916551] [drm:intel_crtc_cursor_set], cursor off [ 4.916553] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 4.916556] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.916558] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.916560] [drm:intel_crtc_cursor_set], cursor off [ 4.916561] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 4.916563] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.916565] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.916566] [drm:intel_crtc_cursor_set], cursor off [ 4.916567] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 4.916569] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.916570] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.916575] [drm:i915_driver_open], [ 4.916579] [drm:intel_crtc_cursor_set], cursor off [ 4.916580] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 4.916582] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.916584] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.916585] [drm:intel_crtc_cursor_set], cursor off [ 4.916586] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 4.916588] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.916589] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.916591] [drm:intel_crtc_cursor_set], cursor off [ 4.916592] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 4.916593] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 4.916595] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 4.916598] [drm:i915_driver_open], [ 4.916640] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[3] [ 4.916643] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[3] [ 4.916648] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 4.916650] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] [ 4.916657] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 4.916659] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes : [ 4.916661] [drm:drm_mode_debug_printmodeline], Modeline 13:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa [ 4.916664] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 4.919947] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 4.919950] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 4.919953] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 4.919955] [drm:intel_crt_detect], CRT not detected via hotplug [ 4.920113] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4.920115] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4.920117] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4.920118] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4.920449] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4.920451] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4.920452] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4.920454] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 4.920457] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 4.920459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 4.920461] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 4.920462] [drm:intel_crt_detect], CRT not detected via hotplug [ 4.920615] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4.920616] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4.920618] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4.920619] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4.920949] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4.920950] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4.920952] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4.920953] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 4.920957] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 4.920959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] [ 4.920962] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected [ 4.920963] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 4.920965] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] [ 4.920967] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected [ 4.920969] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 4.920970] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] [ 4.946029] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 4.971155] [drm:drm_edid_to_eld], ELD monitor HP 2309 [ 4.971158] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 4.971161] [drm:drm_edid_to_eld], ELD size 8, SAD count 1 [ 4.971177] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] probed modes : [ 4.971179] [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 4.971182] [drm:drm_mode_debug_printmodeline], Modeline 44:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 4.971185] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 4.971187] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 4.971189] [drm:drm_mode_debug_printmodeline], Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 4.971191] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.971193] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 4.971195] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 4.971197] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.971199] [drm:drm_mode_debug_printmodeline], Modeline 45:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.971201] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 4.971204] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.971206] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.971208] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 4.971210] [drm:drm_mode_debug_printmodeline], Modeline 46:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 4.971212] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 4.971214] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4.971217] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.971219] [drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4.971231] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 4.971245] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 4.971249] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event. [ 4.971251] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event. [ 4.974164] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 4.978233] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 4.982235] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a [ 4.983354] [drm:intel_hpd_irq_event], [CONNECTOR:20:DP-1] status updated from 2 to 2 [ 5.008168] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 5.008171] [drm:intel_hpd_irq_event], [CONNECTOR:21:HDMI-A-1] status updated from 1 to 1 [ 5.020169] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 5.020173] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 5.020175] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 5.020177] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 5.020178] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 5.020180] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 5.075585] Linux video capture interface: v2.00 [ 5.076962] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b374) [ 5.077660] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 5.078224] ACPI: AC Adapter [AC0] (on-line) [ 5.078417] ALSA sound/pci/hda/hda_intel.c:3787 Haswell must build in CONFIG_SND_HDA_I915 [ 5.078494] ALSA sound/pci/hda/hda_intel.c:3817 Error request power-well from i915 [ 5.078827] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 5.079780] wmi: Mapper loaded [ 5.080141] acer_wmi: Acer Laptop ACPI-WMI Extras [ 5.080193] acer_wmi: Function bitmap for Communication Button: 0x801 [ 5.080253] acer_wmi: Brightness must be controlled by acpi video driver [ 5.082669] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 5.084464] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x8 [ 5.085113] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x8 [ 5.085741] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input9 [ 5.085895] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x8 [ 5.085998] usbcore: registered new interface driver uvcvideo [ 5.087037] USB Video Class driver (1.1.1) [ 5.087365] ALSA sound/pci/hda/patch_realtek.c:414 SKU: Nid=0x1d sku_cfg=0x40589d2d [ 5.087367] ALSA sound/pci/hda/patch_realtek.c:416 SKU: port_connectivity=0x1 [ 5.087368] ALSA sound/pci/hda/patch_realtek.c:417 SKU: enable_pcbeep=0x1 [ 5.087369] ALSA sound/pci/hda/patch_realtek.c:418 SKU: check_sum=0x00000008 [ 5.087371] ALSA sound/pci/hda/patch_realtek.c:419 SKU: customization=0x0000009d [ 5.087372] ALSA sound/pci/hda/patch_realtek.c:420 SKU: external_amp=0x5 [ 5.087373] ALSA sound/pci/hda/patch_realtek.c:421 SKU: platform_type=0x1 [ 5.087374] ALSA sound/pci/hda/patch_realtek.c:422 SKU: swap=0x0 [ 5.087376] ALSA sound/pci/hda/patch_realtek.c:423 SKU: override=0x1 [ 5.087566] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.087568] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.087570] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.087571] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 5.087572] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 5.087574] ALSA sound/pci/hda/hda_auto_parser.c:410 Internal Mic=0x1b [ 5.087576] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x18 [ 5.087578] ALSA sound/pci/hda/patch_realtek.c:486 realtek: No valid SSID, checking pincfg 0x40589d2d for NID 0x1d [ 5.087580] ALSA sound/pci/hda/patch_realtek.c:502 realtek: Enabling init ASM_ID=0x9d2d CODEC_ID=10ec0282 [ 5.088745] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x8 [ 5.090568] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x8 [ 5.091678] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x8 [ 5.093260] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20130328/utaddress-251) [ 5.093703] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x8 [ 5.094374] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x8 [ 5.095377] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 5.097720] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 2 (20130328/utaddress-251) [ 5.098738] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.103882] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0 [ 5.103972] input: Acer WMI hotkeys as /devices/virtual/input/input10 [ 5.106020] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 5.106026] ACPI: Battery Slot [BAT0] (battery present) [ 5.106682] input: Acer BMA150 accelerometer as /devices/virtual/input/input11 [ 5.119384] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 5.119388] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 5.119389] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 5.119391] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 5.119393] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 5.119394] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 5.119407] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPXX 1 (20130328/utaddress-251) [ 5.119410] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \PMIX 2 (20130328/utaddress-251) [ 5.119411] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 3 (20130328/utaddress-251) [ 5.119413] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 4 (20130328/utaddress-251) [ 5.119415] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 5 (20130328/utaddress-251) [ 5.119417] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.119425] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPXX 1 (20130328/utaddress-251) [ 5.119427] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \PMIX 2 (20130328/utaddress-251) [ 5.119428] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 3 (20130328/utaddress-251) [ 5.119430] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 4 (20130328/utaddress-251) [ 5.119432] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 5 (20130328/utaddress-251) [ 5.119433] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 6 (20130328/utaddress-251) [ 5.119435] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.119435] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.119559] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251) [ 5.119560] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.120030] iTCO_vendor_support: vendor-support=0 [ 5.120194] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.120220] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 5.120331] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.451553] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.569658] dracut: Checking ext4: /dev/sda2 [ 5.571054] dracut: issuing e2fsck -a /dev/sda2 [ 5.750245] dracut: /dev/sda2: clean, 2209667/14131200 files, 37767181/56510208 blocks [ 5.751849] dracut: Remounting /dev/sda2 with -o ro [ 5.807366] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.916446] dracut: Mounted root filesystem /dev/sda2 [ 6.079838] device-mapper: uevent: version 1.0.3 [ 6.081323] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 6.250917] dracut: Switching root [ 8.330688] udevd[2562]: starting version 182 [ 9.349304] EXT4-fs (sda2): re-mounted. Opts: (null) [ 11.739585] Adding 8388604k swap on /dev/sda1. Priority:0 extents:1 across:8388604k [ 12.859376] watchdog (3722): /proc/3722/oom_adj is deprecated, please use /proc/3722/oom_score_adj instead. [ 13.304565] [drm:intel_crtc_cursor_set], cursor off [ 13.304569] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 13.304573] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 13.304575] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 13.304578] [drm:intel_crtc_cursor_set], cursor off [ 13.304579] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0) [ 13.304581] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 13.304583] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 13.304584] [drm:intel_crtc_cursor_set], cursor off [ 13.304585] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 13.304587] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 13.304589] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5] [ 18.625986] tg3 0000:0e:00.0: irq 48 for MSI/MSI-X [ 19.536064] tg3 0000:0e:00.0 p3p1: Link is down [ 20.540945] tg3 0000:0e:00.0 p3p1: Link is up at 100 Mbps, full duplex [ 20.541939] tg3 0000:0e:00.0 p3p1: Flow control is off for TX and off for RX [ 33.994312] NET: Registered protocol family 10