[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-rc7_drm-intel-fixes_46a0b6_20130711_+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #5394 SMP Thu Jul 11 13:17:38 CST 2013 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2013_07_11/drm-intel-fixes/46a0b638f35b45fc13d3dc0deb6a7e17988170b2/bzImage_x86_64 root=/dev/sda1 drm.debug=0xe modules_path=kernels//nightly_parents/2013_07_11/drm-intel-fixes/46a0b638f35b45fc13d3dc0deb6a7e17988170b2/modules_x86_64/lib/modules/3.10.0-rc7_drm-intel-fixes_46a0b6_20130711_+ [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000095bff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000db6cfbff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db6cfc00-0x00000000db723bff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db723c00-0x00000000db725bff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000db725c00-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011bffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. OptiPlex 980 /0D438T, BIOS A01 02/16/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DBFFF write-protect [ 0.000000] DC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0DDE00000 mask FFFE00000 uncachable [ 0.000000] 1 base 0DE000000 mask FFE000000 uncachable [ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb6cf max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710] [ 0.000000] Base memory trampoline at [ffff88000008f000] 8f000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0587c000, 0x0587cfff] PGTABLE [ 0.000000] BRK [0x0587d000, 0x0587dfff] PGTABLE [ 0.000000] BRK [0x0587e000, 0x0587efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11be00000-0x11bffffff] [ 0.000000] [mem 0x11be00000-0x11bffffff] page 2M [ 0.000000] BRK [0x0587f000, 0x0587ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x118000000-0x11bdfffff] [ 0.000000] [mem 0x118000000-0x11bdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x117ffffff] [ 0.000000] [mem 0x100000000-0x117ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdb6cefff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdb5fffff] page 2M [ 0.000000] [mem 0xdb600000-0xdb6cefff] page 4k [ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000fc7ef 0007C (v01 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 00000000000fc8df 000F4 (v03 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000ffdc6194 047BC (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000db6cfc00 00040 [ 0.000000] ACPI: SSDT 00000000ffdcaa71 000AC (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 00000000000fc9d3 00092 (v01 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000000fca65 00028 (v01 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000000fca8d 00096 (v32 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000000fcb23 0003E (v01 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 00000000000fcb61 00038 (v01 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000000fcdbd 00032 (v01 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: ____ 00000000000fcdef 00030 (v01 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 00000000000fcb99 00176 (v01 DELL B11K 00000015 ASL 00000061) [ 0.000000] ACPI: SSDT 00000000db725c00 016E0 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011bffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11bffffff] [ 0.000000] NODE_DATA [mem 0x11bff8000-0x11bffbfff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff880117600000-ffff88011b5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11bffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00094fff] [ 0.000000] node 0: [mem 0x00100000-0xdb6cefff] [ 0.000000] node 0: [mem 0x100000000-0x11bffffff] [ 0.000000] On node 0 totalpages: 1013347 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3988 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13980 pages used for memmap [ 0.000000] DMA32 zone: 894671 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 114688 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000095000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000db6cf000 - 00000000db6d0000 [ 0.000000] PM: Registered nosave memory: 00000000db6d0000 - 00000000db723000 [ 0.000000] PM: Registered nosave memory: 00000000db723000 - 00000000db724000 [ 0.000000] PM: Registered nosave memory: 00000000db724000 - 00000000db725000 [ 0.000000] PM: Registered nosave memory: 00000000db725000 - 00000000db726000 [ 0.000000] PM: Registered nosave memory: 00000000db726000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88011bc00000 s74368 r8192 d23936 u262144 [ 0.000000] pcpu-alloc: s74368 r8192 d23936 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 997490 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2013_07_11/drm-intel-fixes/46a0b638f35b45fc13d3dc0deb6a7e17988170b2/bzImage_x86_64 root=/dev/sda1 drm.debug=0xe modules_path=kernels//nightly_parents/2013_07_11/drm-intel-fixes/46a0b638f35b45fc13d3dc0deb6a7e17988170b2/modules_x86_64/lib/modules/3.10.0-rc7_drm-intel-fixes_46a0b6_20130711_+ [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3846540k/4653056k available (7091k kernel code, 599668k absent, 206848k reserved, 4122k data, 62384k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 3457.921 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6915.84 BogoMIPS (lpj=3457921) [ 0.000222] pid_max: default: 32768 minimum: 301 [ 0.000345] Security Framework initialized [ 0.000599] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001545] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001999] Mount-cache hash table entries: 256 [ 0.002277] CPU: Physical Processor ID: 0 [ 0.002381] CPU: Processor Core ID: 0 [ 0.002487] mce: CPU supports 9 MCE banks [ 0.002598] CPU0: Thermal monitoring enabled (TM1) [ 0.002711] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.002711] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002711] tlb_flushall_shift: 6 [ 0.003039] Freeing SMP alternatives: 32k freed [ 0.003160] ACPI: Core revision 20130328 [ 0.133248] ACPI: All ACPI Tables successfully acquired [ 0.133878] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.143984] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 670 @ 3.47GHz (fam: 06, model: 25, stepping: 02) [ 0.246048] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.246355] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.246466] ... version: 3 [ 0.246571] ... bit width: 48 [ 0.246675] ... generic registers: 4 [ 0.246780] ... value mask: 0000ffffffffffff [ 0.246888] ... max period: 000000007fffffff [ 0.246995] ... fixed-purpose events: 3 [ 0.247101] ... event mask: 000000070000000f [ 0.247344] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.287191] Brought up 4 CPUs [ 0.287393] smpboot: Total of 4 processors activated (27663.36 BogoMIPS) [ 0.289206] devtmpfs: initialized [ 0.289498] PM: Registering ACPI NVS region [mem 0xdb6cfc00-0xdb723bff] (344064 bytes) [ 0.289769] xor: measuring software checksum speed [ 0.299019] prefetch64-sse: 15048.000 MB/sec [ 0.309014] generic_sse: 13184.000 MB/sec [ 0.309120] xor: using function: prefetch64-sse (15048.000 MB/sec) [ 0.309251] RTC time: 1:44:07, date: 07/12/13 [ 0.309388] NET: Registered protocol family 16 [ 0.309772] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.309951] ACPI: bus type PCI registered [ 0.310142] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.310322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.312038] PCI: Using configuration type 1 for base access [ 0.312151] dmi type 0xB1 record - unknown flag [ 0.318431] bio: create slab at 0 [ 0.335006] raid6: sse2x1 8714 MB/s [ 0.351996] raid6: sse2x2 10199 MB/s [ 0.368986] raid6: sse2x4 11816 MB/s [ 0.369091] raid6: using algorithm sse2x4 (11816 MB/s) [ 0.369198] raid6: using ssse3x2 recovery algorithm [ 0.369349] ACPI: Added _OSI(Module Device) [ 0.369454] ACPI: Added _OSI(Processor Device) [ 0.369560] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.369665] ACPI: Added _OSI(Processor Aggregator Device) [ 0.370159] ACPI: EC: Look up EC in DSDT [ 0.405055] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.406951] ACPI BIOS Bug: Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0x7E (20130328/tbutils-324) [ 0.407652] ACPI: Interpreter enabled [ 0.409739] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.409992] ACPI: (supports S0 S1 S3 S4 S5) [ 0.410097] ACPI: Using IOAPIC for interrupt routing [ 0.410331] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.503953] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.519949] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.520171] PCI host bridge to bus 0000:00 [ 0.520278] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.520385] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.520495] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.520604] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.520715] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff] [ 0.520826] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] [ 0.520940] pci_bus 0000:00: root bus resource [mem 0xdb800000-0xf7ffffff] [ 0.521050] pci_bus 0000:00: root bus resource [mem 0xff87c000-0xff87ffff] [ 0.521160] pci_bus 0000:00: root bus resource [mem 0xff870000-0xff8707ff] [ 0.521271] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff] [ 0.521382] pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff] [ 0.521493] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff] [ 0.521610] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000 [ 0.521885] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400 [ 0.521908] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.522095] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.522238] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000 [ 0.522246] pci 0000:00:02.0: reg 10: [mem 0xf7c00000-0xf7ffffff 64bit] [ 0.522250] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.522254] pci 0000:00:02.0: reg 20: [io 0xec90-0xec97] [ 0.522325] pci 0000:00:19.0: [8086:10ef] type 00 class 0x020000 [ 0.522341] pci 0000:00:19.0: reg 10: [mem 0xf7be0000-0xf7bfffff] [ 0.522349] pci 0000:00:19.0: reg 14: [mem 0xf7bdc000-0xf7bdcfff] [ 0.522356] pci 0000:00:19.0: reg 18: [io 0xecc0-0xecdf] [ 0.522410] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.522683] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.522702] pci 0000:00:1a.0: reg 10: [mem 0xf7bdd000-0xf7bdd3ff] [ 0.522781] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.523022] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.523171] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.523184] pci 0000:00:1b.0: reg 10: [mem 0xff87c000-0xff87ffff 64bit] [ 0.523243] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.523512] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.523574] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.523679] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.523828] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.523890] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.524127] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.524278] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.524297] pci 0000:00:1d.0: reg 10: [mem 0xf7bde000-0xf7bde3ff] [ 0.524376] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.524613] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.524756] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.524853] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.525005] pci 0000:00:1f.0: [8086:3b0a] type 00 class 0x060100 [ 0.525364] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.525380] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07] [ 0.525386] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13] [ 0.525393] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27] [ 0.525398] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33] [ 0.525405] pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfedf] [ 0.525411] pci 0000:00:1f.2: reg 24: [mem 0xff870000-0xff8707ff] [ 0.525445] pci 0000:00:1f.2: PME# supported from D3hot [ 0.525709] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.525722] pci 0000:00:1f.3: reg 10: [mem 0xf7bdf000-0xf7bdf0ff 64bit] [ 0.525741] pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff] [ 0.526047] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.526208] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.526317] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.526320] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff] [ 0.526325] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.526378] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.526487] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.526490] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff] [ 0.526495] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.526567] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.526685] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.526686] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.526688] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.526690] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode) [ 0.526691] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) [ 0.526693] pci 0000:00:1e.0: bridge window [mem 0xdb800000-0xf7ffffff] (subtractive decode) [ 0.526695] pci 0000:00:1e.0: bridge window [mem 0xff87c000-0xff87ffff] (subtractive decode) [ 0.526696] pci 0000:00:1e.0: bridge window [mem 0xff870000-0xff8707ff] (subtractive decode) [ 0.526698] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode) [ 0.526699] pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff] (subtractive decode) [ 0.526701] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive decode) [ 0.526716] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.526893] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.539547] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.540951] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.542469] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.543873] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.545409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.546924] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.548327] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.549845] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.550575] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.550750] acpi root: \_SB_.PCI0 notify handler is installed [ 0.550765] Found 1 acpi root devices [ 0.550827] ACPI: No dock devices found. [ 0.551003] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.551181] vgaarb: loaded [ 0.551282] vgaarb: bridge control possible 0000:00:02.0 [ 0.551478] SCSI subsystem initialized [ 0.551582] ACPI: bus type ATA registered [ 0.551750] libata version 3.00 loaded. [ 0.551812] ACPI: bus type USB registered [ 0.551961] usbcore: registered new interface driver usbfs [ 0.552087] usbcore: registered new interface driver hub [ 0.552220] usbcore: registered new device driver usb [ 0.552390] pps_core: LinuxPPS API ver. 1 registered [ 0.552497] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.552690] PTP clock support registered [ 0.552882] PCI: Using ACPI for IRQ routing [ 0.554060] PCI: Discovered peer bus 3f [ 0.554164] PCI: root bus 3f: using default resources [ 0.554165] PCI: Probing PCI hardware (bus 3f) [ 0.554191] PCI host bridge to bus 0000:3f [ 0.554297] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.554408] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.554519] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.554699] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000 [ 0.554736] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000 [ 0.554774] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000 [ 0.554810] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000 [ 0.554845] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000 [ 0.554882] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000 [ 0.554929] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.554931] PCI: pci_cache_line_size set to 64 bytes [ 0.554959] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.555070] e820: reserve RAM buffer [mem 0x00095c00-0x0009ffff] [ 0.555072] e820: reserve RAM buffer [mem 0xdb6cfc00-0xdbffffff] [ 0.555182] NetLabel: Initializing [ 0.555285] NetLabel: domain hash size = 128 [ 0.555390] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.555501] NetLabel: unlabeled traffic allowed by default [ 0.555663] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.556062] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.558180] Switching to clocksource hpet [ 0.558339] pnp: PnP ACPI init [ 0.558451] ACPI: bus type PNP registered [ 0.560999] system 00:00: [io 0x0800-0x085f] has been reserved [ 0.561110] system 00:00: [io 0x0c00-0x0c7f] has been reserved [ 0.561219] system 00:00: [io 0x0860-0x08ff] has been reserved [ 0.561340] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.561617] pnp 00:01: [dma 4] [ 0.561650] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.561892] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.562117] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.562364] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.568995] pnp 00:05: [dma 0 disabled] [ 0.569065] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.573640] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.583094] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.583098] pnp: PnP ACPI: found 8 devices [ 0.583202] ACPI: bus type PNP unregistered [ 0.590930] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.591041] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.591149] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.591262] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff] [ 0.591382] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.591563] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.591671] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.591783] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff] [ 0.591895] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.592073] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.593296] pci 0000:00:1e.0: setting latency timer to 64 [ 0.593300] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.593302] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.593303] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.593305] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff] [ 0.593306] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff] [ 0.593308] pci_bus 0000:00: resource 9 [mem 0xdb800000-0xf7ffffff] [ 0.593309] pci_bus 0000:00: resource 10 [mem 0xff87c000-0xff87ffff] [ 0.593311] pci_bus 0000:00: resource 11 [mem 0xff870000-0xff8707ff] [ 0.593313] pci_bus 0000:00: resource 12 [mem 0xfed20000-0xfed9ffff] [ 0.593314] pci_bus 0000:00: resource 13 [mem 0xfeda6000-0xfeda6fff] [ 0.593316] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff] [ 0.593317] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.593319] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff] [ 0.593321] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.593322] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.593324] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf05fffff] [ 0.593326] pci_bus 0000:03: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.593327] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.593329] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.593330] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.593332] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff] [ 0.593333] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff] [ 0.593335] pci_bus 0000:04: resource 9 [mem 0xdb800000-0xf7ffffff] [ 0.593337] pci_bus 0000:04: resource 10 [mem 0xff87c000-0xff87ffff] [ 0.593338] pci_bus 0000:04: resource 11 [mem 0xff870000-0xff8707ff] [ 0.593340] pci_bus 0000:04: resource 12 [mem 0xfed20000-0xfed9ffff] [ 0.593341] pci_bus 0000:04: resource 13 [mem 0xfeda6000-0xfeda6fff] [ 0.593343] pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff] [ 0.593344] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.593346] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.593364] NET: Registered protocol family 2 [ 0.593593] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.593893] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.594109] TCP: Hash tables configured (established 32768 bind 32768) [ 0.594241] TCP: reno registered [ 0.594360] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.594491] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.594664] NET: Registered protocol family 1 [ 0.594825] RPC: Registered named UNIX socket transport module. [ 0.594935] RPC: Registered udp transport module. [ 0.595040] RPC: Registered tcp transport module. [ 0.595146] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.595261] pci 0000:00:02.0: Boot video device [ 0.596742] PCI: CLS 64 bytes, default 64 [ 0.638084] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.638199] software IO TLB [mem 0xd76cf000-0xdb6cf000] (64MB) mapped at [ffff8800d76cf000-ffff8800db6cefff] [ 0.638451] Simple Boot Flag at 0x7a set to 0x80 [ 0.639271] audit: initializing netlink socket (disabled) [ 0.639387] type=2000 audit(1373593446.534:1): initialized [ 0.654350] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.656543] VFS: Disk quotas dquot_6.5.2 [ 0.656700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.657626] NFS: Registering the id_resolver key type [ 0.657740] Key type id_resolver registered [ 0.657845] Key type id_legacy registered [ 0.657951] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.658238] fuse init (API version 7.22) [ 0.658713] bio: create slab at 1 [ 0.658965] Btrfs loaded [ 0.659071] msgmni has been set to 7512 [ 0.659438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.659614] io scheduler noop registered [ 0.659718] io scheduler deadline registered [ 0.659867] io scheduler cfq registered (default) [ 0.660048] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.660203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.660563] ACPI: Requesting acpi_cpufreq [ 0.660771] Monitor-Mwait will be used to enter C-1 state [ 0.660774] Monitor-Mwait will be used to enter C-2 state [ 0.660776] Monitor-Mwait will be used to enter C-3 state [ 0.660784] ACPI: acpi_idle registered with cpuidle [ 0.699697] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.720431] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.721233] Non-volatile memory driver v1.3 [ 0.721337] Linux agpgart interface v0.103 [ 0.721525] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 0.721660] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.722377] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.722638] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.724256] brd: module loaded [ 0.724592] Loading iSCSI transport class v2.0-870. [ 0.725134] iscsi: registered transport (tcp) [ 0.725370] Adaptec aacraid driver 1.2-0[30200]-ms [ 0.725528] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.725765] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k. [ 0.726003] iscsi: registered transport (qla4xxx) [ 0.726137] QLogic iSCSI HBA Driver [ 0.726306] DC390: clustering now enabled by default. If you get problems load [ 0.726482] with "disable_clustering=1" and report to maintainers [ 0.726649] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.726840] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.726976] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.727145] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.727317] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.727317] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.727662] SCSI Media Changer driver v0.25 [ 0.727827] ahci 0000:00:1f.2: version 3.0 [ 0.728265] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.728278] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 0.728431] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x17 impl RAID mode [ 0.728609] ahci 0000:00:1f.2: flags: 64bit ncq led clo pmp fbs pio ems sxs apst [ 0.728789] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.728794] ahci 0000:00:1f.2: port 0 is not capable of FBS [ 0.728924] ahci 0000:00:1f.2: port 1 is not capable of FBS [ 0.730238] ahci 0000:00:1f.2: port 2 is not capable of FBS [ 0.734889] scsi0 : ahci [ 0.735080] scsi1 : ahci [ 0.735272] scsi2 : ahci [ 0.735455] scsi3 : ahci [ 0.735642] scsi4 : ahci [ 0.735822] scsi5 : ahci [ 0.735988] ata1: SATA max UDMA/133 abar m2048@0xff870000 port 0xff870100 irq 41 [ 0.736163] ata2: SATA max UDMA/133 abar m2048@0xff870000 port 0xff870180 irq 41 [ 0.738323] ata3: SATA max UDMA/133 abar m2048@0xff870000 port 0xff870200 irq 41 [ 0.738499] ata4: DUMMY [ 0.738599] ata5: SATA max UDMA/133 abar m2048@0xff870000 port 0xff870300 irq 41 [ 0.738775] ata6: DUMMY [ 0.740578] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012) [ 0.740776] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 0.741039] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.741149] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.741299] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.741411] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.741553] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.741661] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 0.742157] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.742197] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.742396] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 0.987613] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) a4:ba:db:ed:63:ca [ 0.987791] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.987942] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: A002FF-0FF [ 0.988085] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k [ 0.988201] igb: Copyright (c) 2007-2013 Intel Corporation. [ 0.988368] usbcore: registered new interface driver zd1201 [ 0.988503] usbcore: registered new interface driver catc [ 0.988636] usbcore: registered new interface driver kaweth [ 0.988745] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.988943] usbcore: registered new interface driver pegasus [ 0.989076] usbcore: registered new interface driver rtl8150 [ 0.989230] usbcore: registered new interface driver asix [ 0.989364] usbcore: registered new interface driver ax88179_178a [ 0.989501] usbcore: registered new interface driver cdc_ether [ 0.989636] usbcore: registered new interface driver dm9601 [ 0.989768] usbcore: registered new interface driver gl620a [ 0.989901] usbcore: registered new interface driver net1080 [ 0.990035] usbcore: registered new interface driver plusb [ 0.990177] usbcore: registered new interface driver rndis_host [ 0.990315] usbcore: registered new interface driver cdc_subset [ 0.990451] usbcore: registered new interface driver zaurus [ 0.990585] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.990793] usbcore: registered new interface driver cdc_ncm [ 0.991038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.991157] ehci-pci: EHCI PCI platform driver [ 0.991634] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.991642] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.991799] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.991984] ehci-pci 0000:00:1a.0: debug port 2 [ 0.996008] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.996022] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7bdd000 [ 1.002120] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.002261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.002374] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.002549] usb usb1: Product: EHCI Host Controller [ 1.002656] usb usb1: Manufacturer: Linux 3.10.0-rc7_drm-intel-fixes_46a0b6_20130711_+ ehci_hcd [ 1.002834] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.003048] hub 1-0:1.0: USB hub found [ 1.003165] hub 1-0:1.0: 2 ports detected [ 1.003672] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1.003677] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.003836] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.004021] ehci-pci 0000:00:1d.0: debug port 2 [ 1.008027] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.008041] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7bde000 [ 1.014119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.014245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.014359] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.014533] usb usb2: Product: EHCI Host Controller [ 1.014640] usb usb2: Manufacturer: Linux 3.10.0-rc7_drm-intel-fixes_46a0b6_20130711_+ ehci_hcd [ 1.014818] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.015019] hub 2-0:1.0: USB hub found [ 1.015132] hub 2-0:1.0: 2 ports detected [ 1.015322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.015460] uhci_hcd: USB Universal Host Controller Interface driver [ 1.015660] usbcore: registered new interface driver usb-storage [ 1.015869] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.018926] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.019037] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.019263] mousedev: PS/2 mouse device common for all mice [ 1.019463] rtc_cmos 00:04: RTC can wake from S4 [ 1.019697] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.019831] rtc_cmos 00:04: alarms up to one day, 242 bytes nvram, hpet irqs [ 1.020014] cpuidle: using governor ladder [ 1.020178] cpuidle: using governor menu [ 1.020345] hidraw: raw HID events driver (C) Jiri Kosina [ 1.021054] usbcore: registered new interface driver usbhid [ 1.021176] usbhid: USB HID core driver [ 1.021394] TCP: cubic registered [ 1.021497] Initializing XFRM netlink socket [ 1.021606] NET: Registered protocol family 17 [ 1.021728] Key type dns_resolver registered [ 1.022291] PM: Hibernation image not present or could not be loaded. [ 1.022301] registered taskstats version 1 [ 1.022581] Magic number: 5:693:710 [ 1.022750] Warning: unable to open an initial console. [ 1.043139] ata5: SATA link down (SStatus 0 SControl 300) [ 1.043296] ata3: SATA link down (SStatus 4 SControl 300) [ 1.198104] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.198234] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.198722] ata2.00: ATAPI: PLDS DVD-ROM DH-16D5S, VD15, max UDMA/100 [ 1.199253] ata1.00: ATA-7: HDT722516DLA380, V43OA9BA, max UDMA/133 [ 1.199374] ata1.00: 321672960 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.199936] ata2.00: configured for UDMA/100 [ 1.200693] ata1.00: configured for UDMA/133 [ 1.200951] scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 [ 1.201442] sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 1.201542] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.201785] sd 0:0:0:0: [sda] Write Protect is off [ 1.201893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.201902] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.203081] scsi 1:0:0:0: CD-ROM PLDS DVD-ROM DH-16D5S VD15 PQ: 0 ANSI: 5 [ 1.205936] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.206065] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.206338] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.206463] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.230507] sda: sda1 sda2 [ 1.231161] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.231860] Freeing unused kernel memory: 62384k freed [ 1.265396] dracut: dracut-018-35.git20120510.fc17 [ 1.284695] udevd[1169]: starting version 182 [ 1.294285] [drm] Initialized drm 1.1.0 20060810 [ 1.294882] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.295193] ACPI: Power Button [VBTN] [ 1.295421] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.296059] ACPI: Power Button [PWRF] [ 1.298905] [drm:i915_dump_device_info], i915 device info: gen=5, pciid=0x0042 flags=need_gfx_hws,has_hotplug,has_bsd_ring, [ 1.298997] [drm] Memory usable by graphics device = 2048M [ 1.299117] [drm:i915_gem_gtt_init], GMADR size = 256M [ 1.299118] [drm:i915_gem_gtt_init], GTT stolen size = 32M [ 1.299123] i915 0000:00:02.0: setting latency timer to 64 [ 1.304991] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.306802] [drm:intel_detect_pch], Found Ibex Peak PCH [ 1.307449] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdb721c00 [ 1.307457] [drm:intel_opregion_setup], SWSCI supported [ 1.307498] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 1.307507] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.307618] [drm] Driver supports precise vblank timestamp query. [ 1.307744] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 1.307746] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT\xfffffffa [ 1.307748] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.307751] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 1.307754] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.307761] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.307766] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at de000000 [ 1.307797] [drm:intel_modeset_init], 2 display pipes available. [ 1.307809] [drm:intel_shared_dpll_init], 2 shared PLLs initialized [ 1.307813] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.308554] [drm:intel_dp_init_connector], Adding DP connector on port C [ 1.308904] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.311342] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 1.311348] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.313774] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 1.313780] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.313833] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0 has_ck505 0 [ 1.313837] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000] [ 1.315350] [drm:init_status_page], render ring hws offset: 0x00001000 [ 1.315352] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.315354] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 [ 1.315376] [drm:init_pipe_control], render ring pipe control offset: 0x00024000 [ 1.315380] [drm:init_status_page], bsd ring hws offset: 0x00025000 [ 1.315381] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.315382] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072 [ 1.315396] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware [ 1.315415] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 1.315416] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled [ 1.315420] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1 [ 1.315424] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0 [ 1.315428] [drm:intel_modeset_readout_hw_state], [ENCODER:8:DAC-8] hw state readout: enabled, pipe=0 [ 1.315430] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: disabled, pipe=0 [ 1.315433] [drm:intel_modeset_readout_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe=0 [ 1.315436] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:VGA-1] hw state readout: enabled [ 1.315438] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:HDMI-A-1] hw state readout: disabled [ 1.315441] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:DP-1] hw state readout: disabled [ 1.315443] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.315444] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.315445] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.315446] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 659903, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64 [ 1.315448] [drm:intel_dump_pipe_config], requested mode: [ 1.315449] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 1.315451] [drm:intel_dump_pipe_config], adjusted mode: [ 1.315452] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6 [ 1.315454] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.315455] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x02d00190 [ 1.315456] [drm:intel_dump_pipe_config], ips: 0 [ 1.315458] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 1.315459] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.315460] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.315461] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.315462] [drm:intel_dump_pipe_config], requested mode: [ 1.315463] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.315465] [drm:intel_dump_pipe_config], adjusted mode: [ 1.315465] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.315467] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.315468] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 1.315469] [drm:intel_dump_pipe_config], ips: 0 [ 1.315472] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1] [ 1.315476] [drm:check_encoder_state], [ENCODER:8:DAC-8] [ 1.315478] [drm:check_encoder_state], [ENCODER:9:TMDS-9] [ 1.315480] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.315483] [drm:check_crtc_state], [CRTC:3] [ 1.315494] [drm:check_crtc_state], [CRTC:5] [ 1.315495] [drm:check_shared_dpll_state], PCH DPLL A [ 1.315499] [drm:check_shared_dpll_state], PCH DPLL B [ 1.315504] [drm:intel_crt_reset], pch crt adpa set to 0x80f40010 [ 1.315511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 1.315513] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x83f40010 [ 1.325047] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40010, result 1 [ 1.325052] [drm:intel_crt_detect], CRT detected via hotplug [ 1.337993] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.338005] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes : [ 1.338009] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.338016] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.338021] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.338027] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.338033] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.338039] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.338045] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.338050] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.338056] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.338061] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.338068] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 1.338248] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.338255] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.338260] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 1.338265] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 1.338271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 1.338275] [drm:drm_setup_crtcs], [ 1.338278] [drm:drm_enable_connectors], connector 7 enabled? yes [ 1.338282] [drm:drm_enable_connectors], connector 10 enabled? no [ 1.338285] [drm:drm_enable_connectors], connector 14 enabled? no [ 1.338288] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 1.338291] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 1.338294] [drm:drm_target_preferred], found mode 1280x1024 [ 1.338297] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.338302] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3 [ 1.338308] [drm:i915_gem_object_create_stolen], creating stolen object: size=500000 [ 1.338319] [drm:i915_pages_create_for_stolen], offset=0x40000, size=5242880 [ 1.339464] [drm:intelfb_create], allocated 1280x1024 fb: 0x00047000, bo ffff880111e3a000 [ 1.339811] fbcon: inteldrmfb (fb0) is primary device [ 1.341083] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 1.341084] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 1.341085] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.341087] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.341088] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.341089] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.341091] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.341093] [drm:connected_sink_compute_bpp], [CONNECTOR:7:VGA-1] checking for sink bpp constrains [ 1.341094] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2 [ 1.341095] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.341096] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.341096] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.341097] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.341098] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 1.341099] [drm:intel_dump_pipe_config], requested mode: [ 1.341100] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.341101] [drm:intel_dump_pipe_config], adjusted mode: [ 1.341102] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.341103] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.341103] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000 [ 1.341104] [drm:intel_dump_pipe_config], ips: 0 [ 1.367041] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3 [ 1.367045] [drm:intel_disable_shared_dpll], disabling PCH DPLL A [ 1.367463] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A [ 1.367464] [drm:intel_get_shared_dpll], CRTC:3 using pre-allocated PCH DPLL A [ 1.367465] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A [ 1.367465] [drm:intel_get_shared_dpll], setting up PCH DPLL A [ 1.367779] [drm:ironlake_update_plane], Writing base 00047000 00000000 0 0 5120 [ 1.367782] [drm:intel_crtc_mode_set], [ENCODER:8:DAC-8] set [MODE:0:1280x1024] [ 1.367784] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6 [ 1.367787] [drm:ironlake_check_srwm], watermark 1: display plane 67, fbc lines 3, cursor 6 [ 1.367788] [drm:ironlake_check_srwm], watermark 2: display plane 148, fbc lines 4, cursor 10 [ 1.419433] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.419436] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.419937] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 1.420014] hub 1-1:1.0: USB hub found [ 1.420128] hub 1-1:1.0: 6 ports detected [ 1.471983] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 1.472296] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x700 [ 1.472297] [drm:ironlake_fdi_link_train], FDI train 1 done. [ 1.472450] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600 [ 1.472451] [drm:ironlake_fdi_link_train], FDI train 2 done. [ 1.472452] [drm:ironlake_fdi_link_train], FDI train done [ 1.472453] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3 [ 1.472453] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A [ 1.490972] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1] [ 1.490977] [drm:check_encoder_state], [ENCODER:8:DAC-8] [ 1.490980] [drm:check_encoder_state], [ENCODER:9:TMDS-9] [ 1.490983] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.490985] [drm:check_crtc_state], [CRTC:3] [ 1.490998] [drm:check_crtc_state], [CRTC:5] [ 1.491000] [drm:check_shared_dpll_state], PCH DPLL A [ 1.491004] [drm:check_shared_dpll_state], PCH DPLL B [ 1.491009] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 1.491013] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.491044] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 1.491047] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.494042] Console: switching to colour frame buffer device 160x64 [ 1.494045] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 1.494046] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.497178] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.497202] i915 0000:00:02.0: registered panic notifier [ 1.497385] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.499746] dracut: Starting plymouth daemon [ 1.504756] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 1.504759] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.510054] [drm:i915_driver_open], [ 1.510065] [drm:intel_crtc_cursor_set], cursor off [ 1.510067] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 1.510070] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.510072] [drm:intel_crtc_cursor_set], cursor off [ 1.510072] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 1.510074] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.510078] [drm:i915_driver_open], [ 1.510081] [drm:intel_crtc_cursor_set], cursor off [ 1.510082] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 1.510084] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.510085] [drm:intel_crtc_cursor_set], cursor off [ 1.510086] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 1.510087] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.510091] [drm:i915_driver_open], [ 1.510128] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 1.510130] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 1.510134] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 1.510136] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 1.510139] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1 [ 1.510141] [drm:intel_crt_detect], CRT detected via hotplug [ 1.522932] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.522940] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.522951] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes : [ 1.522957] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.522961] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.522966] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.522970] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.522975] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.522979] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.522983] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.522988] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.522995] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.522996] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.523000] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 1.525633] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 1.525639] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 1.525817] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.525824] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.525829] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 1.525838] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 1.525842] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 1.526039] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.526046] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.526051] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 1.526065] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 1.526069] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 1.526075] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 1.526080] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 1.526083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 1.526088] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 1.531088] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 1.531091] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.577831] parport_pc 00:05: reported by Plug and Play ACPI [ 1.577927] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 1.580802] ppdev: user-space parallel port driver [ 1.582114] wmi: Mapper loaded [ 1.587078] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 1 (20130328/utaddress-251) [ 1.587153] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 2 (20130328/utaddress-251) [ 1.587204] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 3 (20130328/utaddress-251) [ 1.587258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.587425] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.587972] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 1.588166] iTCO_vendor_support: vendor-support=0 [ 1.588320] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 1.588371] iTCO_wdt: Found a Q57 TCO device (Version=2, TCOBASE=0x0860) [ 1.588756] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.592442] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 1.594330] microcode: CPU0 sig=0x20652, pf=0x2, revision=0x9 [ 1.596811] microcode: CPU1 sig=0x20652, pf=0x2, revision=0x9 [ 1.598614] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 1.599701] microcode: CPU2 sig=0x20652, pf=0x2, revision=0x9 [ 1.600150] hda_codec: ALC269VB: SKU not ready 0x411111f0 [ 1.600691] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 1.600693] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.600695] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 1.600696] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 1.600697] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 1.600698] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x19 [ 1.600700] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x18 [ 1.600701] ALSA sound/pci/hda/patch_realtek.c:486 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d [ 1.600702] ALSA sound/pci/hda/patch_realtek.c:569 realtek: Enable default setup for auto mode as fallback [ 1.602242] microcode: CPU3 sig=0x20652, pf=0x2, revision=0x9 [ 1.603168] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.603641] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 1.611082] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 1.614200] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 1.614204] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 1.638179] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.638220] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.638468] hub 2-1:1.0: USB hub found [ 1.638548] hub 2-1:1.0: 8 ports detected [ 1.638846] tsc: Refined TSC clocksource calibration: 3457.977 MHz [ 1.638873] Switching to clocksource tsc [ 1.820463] kjournald starting. Commit interval 5 seconds [ 1.820553] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 1.907454] dracut: Checking ext3: /dev/sda1 [ 1.908979] dracut: issuing e2fsck -a /dev/sda1 [ 2.187811] dracut: /dev/sda1: clean, 2080150/9928704 files, 32787165/39696896 blocks [ 2.189485] dracut: Remounting /dev/sda1 with -o ro [ 2.319324] kjournald starting. Commit interval 5 seconds [ 2.319420] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 2.363954] dracut: Mounted root filesystem /dev/sda1 [ 2.442541] device-mapper: uevent: version 1.0.3 [ 2.444186] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 2.554929] dracut: Switching root [ 3.029491] systemd[1]: systemd 36 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora) [ 3.208938] systemd[1]: /sbin/modprobe failed with error code 1. [ 3.222985] systemd[1]: Set hostname to . [ 4.839103] udevd[2212]: starting version 173 [ 5.144638] systemd-readahead-collect[2202]: Failed to create fanotify object: Function not implemented [ 5.145940] systemd-readahead-replay[2203]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 5.147293] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1 [ 7.594171] EXT3-fs (sda1): using internal journal [ 11.067446] systemd-readahead-replay[2203]: open(/usr/bin/plymouth) failed: Too many levels of symbolic links [ 11.192929] systemd-readahead-replay[2203]: open(/usr/lib64/libplc4.so) failed: Too many levels of symbolic links [ 11.194112] systemd-readahead-replay[2203]: open(/usr/lib64/libplds4.so) failed: Too many levels of symbolic links [ 11.286720] systemd-readahead-replay[2203]: open(/usr/sbin/alsactl) failed: Too many levels of symbolic links [ 11.408392] systemd-readahead-replay[2203]: open(/usr/bin/gzip) failed: Too many levels of symbolic links [ 11.483288] systemd-readahead-replay[2203]: open(/usr/lib64/libnspr4.so) failed: Too many levels of symbolic links [ 11.806275] systemd-readahead-replay[2203]: open(/usr/lib64/libfreebl3.so) failed: Too many levels of symbolic links [ 11.878631] systemd-readahead-replay[2203]: open(/usr/lib64/libdb-5.2.so) failed: Too many levels of symbolic links [ 13.031278] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 13.031281] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 13.295508] rmmod[2215]: ERROR: Module scsi_wait_scan does not exist in /proc/modules [ 13.297380] modprobe[2215]: FATAL: Could not load /lib/modules/3.10.0-rc7_drm-intel-fixes_46a0b6_20130711_+/modules.dep: No such file or directory [ 13.299821] rmmod[3123]: ERROR: Module scsi_wait_scan does not exist in /proc/modules [ 14.567023] fedora-storage-init[3130]: Setting up Logical Volume Management: No volume groups found [ 14.568241] fedora-storage-init[3130]: [ OK ] [ 14.635179] fedora-storage-init[3202]: Setting up Logical Volume Management: No volume groups found [ 14.636642] fedora-storage-init[3202]: [ OK ] [ 14.819933] Adding 2046972k swap on /dev/sda2. Priority:0 extents:1 across:2046972k [ 14.992408] udev-configure-printer[3212]: add /module/lpc_ich [ 14.992414] udev-configure-printer[3213]: add /bus/pci/drivers/lpc_ich [ 14.992501] udev-configure-printer[3213]: Failed to get parent [ 14.993833] udev-configure-printer[3212]: Failed to get parent [ 15.057271] lvm[3208]: No volume groups found [ 15.995828] /usr/sbin/gpm[3234]: *** info [daemon/startup.c(136)]: [ 15.995832] /usr/sbin/gpm[3234]: Started gpm successfully. Entered daemon mode. [ 16.017635] acpid[3251]: starting up with proc fs [ 16.017640] acpid[3251]: skipping incomplete file /etc/acpi/events/videoconf [ 16.017643] acpid[3251]: 1 rule loaded [ 16.017645] acpid[3251]: waiting for events: event logging is off [ 16.035100] mcelog[3257]: mcelog: Unsupported new Family 6 Model 25 CPU: only decoding architectural errors [ 16.108956] avahi-daemon[3254]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70). [ 16.110121] avahi-daemon[3254]: Successfully dropped root privileges. [ 16.111260] avahi-daemon[3254]: avahi-daemon 0.6.30 starting up. [ 16.130821] avahi-daemon[3254]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! [ 17.253244] watchdog (3314): /proc/3314/oom_adj is deprecated, please use /proc/3314/oom_score_adj instead. [ 17.977314] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 18.077869] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 18.188548] [drm:intel_crtc_cursor_set], cursor off [ 18.188552] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 18.188556] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 18.188558] [drm:intel_crtc_cursor_set], cursor off [ 18.188559] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 18.188561] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 18.319698] mount[3342]: mount.nfs: Failed to resolve server x-kernel: Name or service not known [ 19.433876] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx [ 19.434015] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO [ 21.588509] NET: Registered protocol family 10 [ 54.450443] [drm:i915_driver_open], [ 54.450474] [drm:intel_crtc_cursor_set], cursor off [ 54.450477] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 54.450480] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 54.450482] [drm:intel_crtc_cursor_set], cursor off [ 54.450484] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 54.450485] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 54.450491] [drm:i915_driver_open], [ 55.191190] [drm:intel_crtc_cursor_set], cursor off [ 55.191194] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 55.191199] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 55.191201] [drm:intel_crtc_cursor_set], cursor off [ 55.191202] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 55.191203] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 55.191399] [drm:i915_driver_open], [ 55.191404] [drm:intel_crtc_cursor_set], cursor off [ 55.191405] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 55.191407] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 55.191408] [drm:intel_crtc_cursor_set], cursor off [ 55.191409] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 55.191410] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 55.191414] [drm:i915_driver_open], [ 60.781538] [drm:i915_hangcheck_elapsed] *ERROR* stuck on bsd ring [ 60.781644] [drm] capturing error event; look for more information in /sys/kernel/debug/dri/0/i915_error_state [ 60.784685] [drm:i915_error_work_func], resetting chip [ 60.784735] [drm:i915_set_reset_status] *ERROR* bsd ring hung inside bo (0x952000 ctx 0) at 0x952004 [ 60.784808] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware [ 60.784811] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 60.784886] [drm:ironlake_update_plane], Writing base 00047000 00000000 0 0 5120 [ 60.784911] [drm:intel_crtc_cursor_set], cursor off [ 60.784914] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 60.784917] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3] [ 60.784921] [drm:intel_crtc_cursor_set], cursor off [ 60.784922] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 60.784923] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]