[ 0.333072] pci 0000:13:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.333147] pci 0000:13:00.0: supports D1 D2 [ 0.333149] pci 0000:13:00.0: PME# supported from D1 D2 D3hot [ 0.333186] pci 0000:13:00.0: System wakeup disabled by ACPI [ 0.340803] pci 0000:00:1c.2: PCI bridge to [bus 13-18] [ 0.340814] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.340824] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] [ 0.340839] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.341029] pci 0000:19:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.341086] pci 0000:19:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit] [ 0.341423] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold [ 0.341496] pci 0000:19:00.0: System wakeup disabled by ACPI [ 0.348871] pci 0000:00:1c.3: PCI bridge to [bus 19] [ 0.348878] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] [ 0.348964] \_SB_.PCI0:_OSC invalid UUID [ 0.348966] _OSC request data:1 1f 0 [ 0.348970] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.348972] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.349592] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.349669] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15) [ 0.349744] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15) [ 0.349817] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.349891] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.349965] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15) [ 0.350038] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.350111] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.351300] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.351308] ACPI: \_SB_.PCI0: notify handler is installed [ 0.351369] Found 1 acpi root devices [ 0.351413] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.351545] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.351551] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.351553] vgaarb: loaded [ 0.351554] vgaarb: bridge control possible 0000:01:00.0 [ 0.351556] vgaarb: no bridge control possible 0000:00:02.0 [ 0.351603] PCI: Using ACPI for IRQ routing [ 0.359009] PCI: pci_cache_line_size set to 64 bytes [ 0.359155] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.359158] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff] [ 0.359160] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.359162] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff] [ 0.359309] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.359315] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.361343] Switched to clocksource hpet [ 0.363322] pnp: PnP ACPI init [ 0.363337] ACPI: bus type PNP registered [ 0.363371] pnp 00:00: [dma 4] [ 0.363395] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.363424] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.363541] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.363579] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.363636] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.363639] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.363642] system 00:04: [io 0x1010-0x1013] has been reserved [ 0.363645] system 00:04: [io 0xffff] has been reserved [ 0.363647] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.363650] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.363653] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.363656] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.363659] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.363691] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.363744] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.363747] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.363810] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.363870] pnp 00:08: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active) [ 0.364042] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.364045] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.364048] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.364052] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.364055] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.364058] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.364061] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.364064] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.364067] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.364069] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.364072] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365383] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.365447] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved [ 0.365450] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved [ 0.365453] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.365473] pnp: PnP ACPI: found 12 devices [ 0.365475] ACPI: bus type PNP unregistered [ 0.372216] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.372219] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.372265] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref] [ 0.372268] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.372271] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.372275] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff] [ 0.372278] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.372283] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] [ 0.372287] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.372293] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] [ 0.372298] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] [ 0.372305] pci 0000:00:1c.1: PCI bridge to [bus 0d-12] [ 0.372309] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.372315] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] [ 0.372320] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] [ 0.372328] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref] [ 0.372331] pci 0000:00:1c.2: PCI bridge to [bus 13-18] [ 0.372334] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.372341] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] [ 0.372346] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.372353] pci 0000:00:1c.3: PCI bridge to [bus 19] [ 0.372359] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] [ 0.372847] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.372850] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.372852] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.372855] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.372857] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.372859] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff] [ 0.372862] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 0.372864] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff] [ 0.372866] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff] [ 0.372869] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref] [ 0.372871] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.372873] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff] [ 0.372876] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref] [ 0.372878] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff] [ 0.372880] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff] [ 0.372882] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.372885] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff] [ 0.372982] NET: Registered protocol family 2 [ 0.373263] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.373415] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.373503] TCP: Hash tables configured (established 32768 bind 32768) [ 0.373522] TCP: reno registered [ 0.373530] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.373551] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.373666] NET: Registered protocol family 1 [ 0.373681] pci 0000:00:02.0: Boot video device [ 0.417906] PCI: CLS 64 bytes, default 64 [ 0.417947] Unpacking initramfs... [ 3.734807] Freeing initrd memory: 148760K (ffff880025d64000 - ffff88002eeaa000) [ 3.734813] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.734816] software IO TLB [mem 0x98e3f000-0x9ce3f000] (64MB) mapped at [ffff880098e3f000-ffff88009ce3efff] [ 3.734874] Simple Boot Flag at 0x44 set to 0x1 [ 3.735587] audit: initializing netlink socket (disabled) [ 3.735599] type=2000 audit(1374424296.712:1): initialized [ 3.753761] bounce pool size: 64 pages [ 3.753766] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.754324] VFS: Disk quotas dquot_6.5.2 [ 3.754358] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.754461] msgmni has been set to 7822 [ 3.754722] alg: No test for stdrng (krng) [ 3.754754] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 3.754804] io scheduler noop registered [ 3.754805] io scheduler deadline registered [ 3.754836] io scheduler cfq registered (default) [ 3.754929] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 3.755160] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.755177] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.755244] intel_idle: MWAIT substates: 0x21120 [ 3.755246] intel_idle: v0.4 model 0x2A [ 3.755247] intel_idle: lapic_timer_reliable_states 0xffffffff [ 3.755304] GHES: HEST is not enabled! [ 3.755358] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.755935] Linux agpgart interface v0.103 [ 3.756147] mei_me 0000:00:16.0: setting latency timer to 64 [ 3.756178] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [ 3.762435] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.769606] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.769612] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.769733] mousedev: PS/2 mouse device common for all mice [ 3.769830] rtc_cmos 00:05: RTC can wake from S4 [ 3.769967] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.769997] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.770007] Intel P-state driver initializing. [ 3.770018] Intel pstate controlling: cpu 0 [ 3.770033] Intel pstate controlling: cpu 1 [ 3.770053] Intel pstate controlling: cpu 2 [ 3.770066] Intel pstate controlling: cpu 3 [ 3.770078] Intel pstate controlling: cpu 4 [ 3.770092] Intel pstate controlling: cpu 5 [ 3.770105] Intel pstate controlling: cpu 6 [ 3.770118] Intel pstate controlling: cpu 7 [ 3.770397] cpuidle: using governor ladder [ 3.770704] cpuidle: using governor menu [ 3.770749] drop_monitor: Initializing network drop monitor service [ 3.770832] TCP: cubic registered [ 3.771034] NET: Registered protocol family 10 [ 3.771306] mip6: Mobile IPv6 [ 3.771308] NET: Registered protocol family 17 [ 3.771750] PM: Hibernation image not present or could not be loaded. [ 3.771761] registered taskstats version 1 [ 3.772842] rtc_cmos 00:05: setting system clock to 2013-07-21 16:31:37 UTC (1374424297) [ 3.773956] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.774287] Freeing unused kernel memory: 924K (ffffffff816a2000 - ffffffff81789000) [ 3.774289] Write protecting the kernel read-only data: 6144k [ 3.775606] Freeing unused kernel memory: 336K (ffff8800013ac000 - ffff880001400000) [ 3.778192] Freeing unused kernel memory: 468K (ffff88000158b000 - ffff880001600000) [ 3.845413] udevd[97]: starting version 175 [ 3.858184] rtsx_pci 0000:13:00.0: irq 42 for MSI/MSI-X [ 3.858211] rtsx_pci 0000:13:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42 [ 3.860706] ACPI: bus type USB registered [ 3.860753] usbcore: registered new interface driver usbfs [ 3.860767] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.860773] usbcore: registered new interface driver hub [ 3.860782] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.860904] usbcore: registered new device driver usb [ 3.861058] r8169 0000:07:00.0: irq 43 for MSI/MSI-X [ 3.861304] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000640000, 10:1f:74:12:76:d7, XID 0c900800 IRQ 43 [ 3.861308] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.862116] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.862558] ehci-pci: EHCI PCI platform driver [ 3.862740] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 3.862755] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.862763] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.862780] ehci-pci 0000:00:1a.0: debug port 2 [ 3.866683] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.866722] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc750a000 [ 3.869504] SCSI subsystem initialized [ 3.871205] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.871209] ACPI: Thermal Zone [THRM] (61 C) [ 3.873158] ACPI: bus type ATA registered [ 3.875728] libata version 3.00 loaded. [ 3.876257] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.876286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.876290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.876293] usb usb1: Product: EHCI Host Controller [ 3.876296] usb usb1: Manufacturer: Linux 3.11.0-rc1 ehci_hcd [ 3.876298] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.876522] hub 1-0:1.0: USB hub found [ 3.876528] hub 1-0:1.0: 2 ports detected [ 3.876641] xhci_hcd 0000:19:00.0: xHCI Host Controller [ 3.876652] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 2 [ 3.876861] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 3.876914] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X [ 3.876923] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X [ 3.876930] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X [ 3.876938] xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X [ 3.876946] xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X [ 3.876954] xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X [ 3.876961] xhci_hcd 0000:19:00.0: irq 50 for MSI/MSI-X [ 3.876968] xhci_hcd 0000:19:00.0: irq 51 for MSI/MSI-X [ 3.877183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.877185] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.877187] usb usb2: Product: xHCI Host Controller [ 3.877188] usb usb2: Manufacturer: Linux 3.11.0-rc1 xhci_hcd [ 3.877190] usb usb2: SerialNumber: 0000:19:00.0 [ 3.877272] xHCI xhci_add_endpoint called for root hub [ 3.877273] xHCI xhci_check_bandwidth called for root hub [ 3.877307] hub 2-0:1.0: USB hub found [ 3.877316] hub 2-0:1.0: 2 ports detected [ 3.877409] xhci_hcd 0000:19:00.0: xHCI Host Controller [ 3.877413] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3 [ 3.877422] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.877431] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.877466] ehci-pci 0000:00:1d.0: debug port 2 [ 3.880294] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.880298] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.880301] usb usb3: Product: xHCI Host Controller [ 3.880304] usb usb3: Manufacturer: Linux 3.11.0-rc1 xhci_hcd [ 3.880306] usb usb3: SerialNumber: 0000:19:00.0 [ 3.880441] xHCI xhci_add_endpoint called for root hub [ 3.880443] xHCI xhci_check_bandwidth called for root hub [ 3.880478] hub 3-0:1.0: USB hub found [ 3.880492] hub 3-0:1.0: 2 ports detected [ 3.881384] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.881419] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc7509000 [ 3.884432] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 3.892248] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.892276] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.892278] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.892280] usb usb4: Product: EHCI Host Controller [ 3.892282] usb usb4: Manufacturer: Linux 3.11.0-rc1 ehci_hcd [ 3.892283] usb usb4: SerialNumber: 0000:00:1d.0 [ 3.892458] hub 4-0:1.0: USB hub found [ 3.892467] hub 4-0:1.0: 2 ports detected [ 3.892607] ahci 0000:00:1f.2: version 3.0 [ 3.892770] ahci 0000:00:1f.2: irq 52 for MSI/MSI-X [ 3.908318] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode [ 3.908332] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 3.908345] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.917008] scsi0 : ahci [ 3.917442] scsi1 : ahci [ 3.917647] scsi2 : ahci [ 3.917881] scsi3 : ahci [ 3.918197] scsi4 : ahci [ 3.918386] scsi5 : ahci [ 3.918483] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 52 [ 3.918485] ata2: DUMMY [ 3.918487] ata3: DUMMY [ 3.918488] ata4: DUMMY [ 3.918490] ata5: DUMMY [ 3.918493] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 52 [ 4.188244] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.236224] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.238831] ata6.00: ATAPI: hp BD E DS6E2LH, FH62, max UDMA/100 [ 4.240644] ata6.00: configured for UDMA/100 [ 4.244248] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.250729] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133 [ 4.250735] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.257356] ata1.00: configured for UDMA/133 [ 4.257670] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5 [ 4.261853] scsi 5:0:0:0: CD-ROM hp BD E DS6E2LH FH62 PQ: 0 ANSI: 5 [ 4.268536] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.268657] sd 0:0:0:0: [sda] Write Protect is off [ 4.268660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.268703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.271253] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.271261] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.271498] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 4.273207] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.273294] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 4.320579] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.320587] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.321029] hub 1-1:1.0: USB hub found [ 4.321147] hub 1-1:1.0: 6 ports detected [ 4.333390] sda: sda1 sda2 < sda5 > [ 4.334266] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.432164] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 4.568589] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.568596] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.569008] hub 4-1:1.0: USB hub found [ 4.569182] hub 4-1:1.0: 6 ports detected [ 4.630719] device-mapper: uevent: version 1.0.3 [ 4.630852] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 4.640092] PM: Starting manual resume from disk [ 4.640095] PM: Hibernation image partition 8:5 present [ 4.640096] PM: Looking for hibernation image. [ 4.640147] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 4.640223] PM: Image not found (code -22) [ 4.640234] PM: Hibernation image not present or could not be loaded. [ 4.710474] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.732067] tsc: Refined TSC clocksource calibration: 1995.470 MHz [ 4.733845] usb 1-1.1: New USB device found, idVendor=138a, idProduct=0018 [ 4.733855] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 4.733862] usb 1-1.1: SerialNumber: 3535b0982070 [ 4.804128] usb 1-1.2: new high-speed USB device number 4 using ehci-pci [ 4.931363] usb 1-1.2: New USB device found, idVendor=064e, idProduct=e258 [ 4.931375] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.931381] usb 1-1.2: Product: HP TrueVision HD [ 4.931386] usb 1-1.2: Manufacturer: SuYin [ 4.931386] [ 4.931392] usb 1-1.2: SerialNumber: HF1016-A821-OV01-VH-R04.00.00 [ 5.732075] Switched to clocksource tsc [ 7.164577] udevd[455]: starting version 175 [ 8.043509] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a [ 8.334112] ACPI: AC Adapter [AC] (on-line) [ 8.534804] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a [ 8.536580] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a [ 8.538589] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a [ 8.540232] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a [ 8.541717] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a [ 8.543157] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a [ 8.544580] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a [ 8.545989] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.841101] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1 [ 8.844068] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [ 8.844123] ACPI: Lid Switch [LID] [ 8.872997] ACPI: Battery Slot [BAT0] (battery present) [ 8.873087] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 8.873093] ACPI: Power Button [PWRB] [ 8.873144] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 8.873147] ACPI: Power Button [PWRF] [ 8.963619] ACPI: Requesting acpi_cpufreq [ 9.231781] hp_accel: hardware type DV7 found [ 9.248448] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 9.397867] lis3lv02d: 8 bits 3DC sensor found [ 9.450344] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 9.450350] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.450354] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 9.450357] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251) [ 9.450361] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.450362] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 9.450364] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251) [ 9.450367] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.450368] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 9.450371] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251) [ 9.450374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.450375] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.476804] iTCO_vendor_support: vendor-support=0 [ 9.846734] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 9.846775] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 9.846933] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.069987] ACPI Warning: 0x0000000000006040-0x000000000000605f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251) [ 10.069998] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.146380] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5 [ 10.146823] wmi: Mapper loaded [ 10.404135] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 10.580601] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 726294 [ 10.624594] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 11.590893] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X [ 12.152263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 12.175354] [drm] Initialized drm 1.1.0 20060810 [ 12.460973] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.461070] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 12.461130] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.591001] media: Linux media interface: v0.10 [ 13.212685] Linux video capture interface: v2.00 [ 14.103233] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:e258) [ 14.106454] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12 [ 14.106571] usbcore: registered new interface driver uvcvideo [ 14.106573] USB Video Class driver (1.1.1) [ 15.875593] [drm] Memory usable by graphics device = 2048M [ 15.875600] i915 0000:00:02.0: setting latency timer to 64 [ 15.887647] i915 0000:00:02.0: irq 54 for MSI/MSI-X [ 15.887655] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 15.887656] [drm] Driver supports precise vblank timestamp query. [ 15.887682] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 15.887744] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 15.888626] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 15.888628] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 15.911061] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 15.911064] [drm] This can cause pipe underruns and display issues. [ 15.911065] [drm] Please upgrade your BIOS to fix this. [ 15.926140] fbcon: inteldrmfb (fb0) is primary device [ 16.210721] [drm] radeon kernel modesetting enabled. [ 16.210734] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 16.673986] Console: switching to colour frame buffer device 200x56 [ 16.679544] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 16.679546] i915 0000:00:02.0: registered panic notifier [ 16.679585] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 16.679967] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 16.701939] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 16.702049] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input13 [ 16.704064] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 16.704150] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14 [ 16.704390] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 16.704606] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1659). [ 16.704625] [drm] register mmio base: 0xC6500000 [ 16.704627] [drm] register mmio size: 131072 [ 16.704630] vga_switcheroo: enabled [ 16.704762] ATPX version 1 [ 17.828094] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 21.356050] ATOM BIOS: HP/Flex [ 21.356504] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 21.356507] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 21.356509] [drm] Detected VRAM RAM=1024M, BAR=256M [ 21.356511] [drm] RAM width 64bits DDR [ 21.356677] [TTM] Zone kernel: Available graphics memory: 2003352 kiB [ 21.356680] [TTM] Initializing pool allocator [ 21.356685] [TTM] Initializing DMA pool allocator [ 21.356715] [drm] radeon: 1024M of VRAM memory ready [ 21.356717] [drm] radeon: 512M of GTT memory ready. [ 21.465006] radeon 0000:01:00.0: ffff880138aafc00 unpin not necessary [ 21.607307] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90011866118 [ 21.607313] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 21.607804] [drm] PCIE gen 2 link speeds already enabled [ 21.607877] [drm] Loading CAICOS Microcode [ 21.625035] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 21.625154] radeon 0000:01:00.0: WB enabled [ 21.625158] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880158907c00 [ 21.625160] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880158907c0c [ 21.627068] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc900120b2118 [ 21.627073] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 21.627074] [drm] Driver supports precise vblank timestamp query. [ 21.627114] radeon 0000:01:00.0: irq 56 for MSI/MSI-X [ 21.627128] radeon 0000:01:00.0: radeon: using MSI. [ 21.627173] [drm] radeon: irq initialized. [ 21.643697] [drm] ring test on 0 succeeded in 3 usecs [ 21.643761] [drm] ring test on 3 succeeded in 1 usecs [ 21.828563] [drm] ring test on 5 succeeded in 2 usecs [ 21.828567] [drm] UVD initialized successfully. [ 21.828795] [drm] ib test on ring 0 succeeded in 0 usecs [ 21.828861] [drm] ib test on ring 3 succeeded in 0 usecs [ 21.980129] [drm] ib test on ring 5 succeeded [ 21.980352] [drm] Radeon Display Connectors [ 21.986945] [drm] Internal thermal controller with fan control [ 21.987015] == power state 0 == [ 21.987016] ui class: none [ 21.987017] internal class: boot [ 21.987019] caps: [ 21.987020] uvd vclk: 0 dclk: 0 [ 21.987021] power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.987023] power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.987024] power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.987025] status: c r b [ 21.987026] == power state 1 == [ 21.987027] ui class: performance [ 21.987028] internal class: none [ 21.987029] caps: [ 21.987030] uvd vclk: 0 dclk: 0 [ 21.987031] power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.987033] power level 1 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987034] power level 2 sclk: 75000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987035] status: [ 21.987036] == power state 2 == [ 21.987036] ui class: none [ 21.987037] internal class: uvd [ 21.987038] caps: video [ 21.987040] uvd vclk: 75000 dclk: 56000 [ 21.987041] power level 0 sclk: 70000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987042] power level 1 sclk: 70000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987043] power level 2 sclk: 70000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987044] status: [ 21.987045] == power state 3 == [ 21.987046] ui class: battery [ 21.987047] internal class: none [ 21.987048] caps: [ 21.987049] uvd vclk: 0 dclk: 0 [ 21.987050] power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.987051] power level 1 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987052] power level 2 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987053] status: [ 21.987054] == power state 4 == [ 21.987054] ui class: battery [ 21.987055] internal class: uvd_hd [ 21.987056] caps: video [ 21.987058] uvd vclk: 40000 dclk: 30000 [ 21.987059] power level 0 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987060] power level 1 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987061] power level 2 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987062] status: [ 21.987063] == power state 5 == [ 21.987064] ui class: battery [ 21.987064] internal class: uvd_sd [ 21.987066] caps: video [ 21.987067] uvd vclk: 10000 dclk: 10000 [ 21.987068] power level 0 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987069] power level 1 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987070] power level 2 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.987071] status: [ 21.995770] switching from power state: [ 21.995773] ui class: none [ 21.995774] internal class: boot [ 21.995776] caps: [ 21.995777] uvd vclk: 0 dclk: 0 [ 21.995779] power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.995781] power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.995782] power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.995783] status: c b [ 21.995784] switching to power state: [ 21.995785] ui class: performance [ 21.995786] internal class: none [ 21.995787] caps: [ 21.995788] uvd vclk: 0 dclk: 0 [ 21.995789] power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0 [ 21.995790] power level 1 sclk: 40000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.995791] power level 2 sclk: 75000 mclk: 77500 vddc: 1100 vddci: 0 [ 21.995792] status: r [ 21.997228] [drm] radeon: dpm initialized [ 22.003799] radeon 0000:01:00.0: No connectors reported connected with modes [ 22.003802] [drm] Cannot find any crtc or sizes - going 1024x768 [ 22.005932] [drm] fb mappable at 0xA0375000 [ 22.005933] [drm] vram apper at 0xA0000000 [ 22.005934] [drm] size 3145728 [ 22.005935] [drm] fb depth is 24 [ 22.005936] [drm] pitch is 4096 [ 22.006118] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device [ 22.006131] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 1 [ 22.870143] Adding 8280060k swap on /dev/sda5. Priority:-1 extents:1 across:8280060k [ 22.880437] EXT4-fs (sda1): re-mounted. Opts: (null) [ 23.088210] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 23.598963] loop: module loaded [ 26.880490] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 31.881427] lp: driver loaded but no devices found [ 32.971854] ppdev: user-space parallel port driver [ 36.376234] Ebtables v2.0 registered [ 36.720091] ip_tables: (C) 2000-2006 Netfilter Core Team [ 36.906708] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 37.419461] cgroup: libvirtd (2871) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 37.419465] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 42.788923] vboxdrv: Found 8 processor cores. [ 42.789424] vboxdrv: fAsync=0 offMin=0x1a7 offMax=0x1c2f0 [ 42.789504] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 42.789506] vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004). [ 44.431884] Bluetooth: Core ver 2.16 [ 44.431900] NET: Registered protocol family 31 [ 44.431901] Bluetooth: HCI device and connection manager initialized [ 44.431910] Bluetooth: HCI socket layer initialized [ 44.431912] Bluetooth: L2CAP socket layer initialized [ 44.431916] Bluetooth: SCO socket layer initialized [ 45.515169] vboxpci: IOMMU not found (not registered) [ 45.585371] Bluetooth: RFCOMM TTY layer initialized [ 45.585383] Bluetooth: RFCOMM socket layer initialized [ 45.585384] Bluetooth: RFCOMM ver 1.11 [ 46.601745] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 46.601749] Bluetooth: BNEP filters: protocol multicast [ 46.601766] Bluetooth: BNEP socket layer initialized [ 48.856204] r8169 0000:07:00.0 eth0: link down [ 70.464170] radeon: switched off [ 70.578339] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc9001160a118 [ 525.572982] smpboot: CPU 2 is now offline [ 525.576081] smpboot: CPU 3 is now offline [ 525.578989] smpboot: CPU 4 is now offline [ 525.581503] smpboot: CPU 5 is now offline [ 525.584744] smpboot: CPU 6 is now offline [ 525.587485] smpboot: CPU 7 is now offline [ 1253.158952] PM: Syncing filesystems ... done. [ 1253.394786] PM: Preparing system for mem sleep [ 1253.849151] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1253.850375] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1253.851546] PM: Entering mem sleep [ 1253.851674] Suspending console(s) (use no_console_suspend to debug) [ 1253.864930] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1253.880931] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1253.897487] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1253.897548] sd 0:0:0:0: [sda] Stopping disk [ 1253.948447] mei_me 0000:00:16.0: suspend [ 1254.924399] PM: suspend of devices complete after 1027.699 msecs [ 1254.924568] PM: late suspend of devices complete after 0.165 msecs [ 1254.924763] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [ 1254.940504] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 1254.956457] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 1254.988312] PM: noirq suspend of devices complete after 63.762 msecs [ 1254.988533] ACPI: Preparing to enter system sleep state S3 [ 1254.989899] PM: Saving platform NVS memory [ 1254.990488] Disabling non-boot CPUs ... [ 1255.092246] smpboot: CPU 1 is now offline [ 1255.094927] ACPI: Low-level resume complete [ 1255.095016] PM: Restoring platform NVS memory [ 1255.095830] CPU0: Thermal monitoring handled by SMI [ 1255.095911] Enabling non-boot CPUs ... [ 1255.096131] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1255.107505] CPU1: Thermal monitoring handled by SMI [ 1255.110192] CPU1 is up [ 1255.115487] ACPI: Waking up from system sleep state S3 [ 1255.117507] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [ 1255.167494] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1255.199459] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1255.231347] radeon 0000:01:00.0: Refused to change power state, currently in D3 [ 1255.335458] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [ 1255.335525] PM: noirq resume of devices complete after 214.808 msecs [ 1255.335679] PM: early resume of devices complete after 0.102 msecs [ 1255.335709] i915 0000:00:02.0: setting latency timer to 64 [ 1255.335853] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [ 1255.336026] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1255.336184] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 1255.336375] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1255.336399] ahci 0000:00:1f.2: setting latency timer to 64 [ 1255.343331] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [ 1255.343434] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 1255.343434] [drm] This can cause pipe underruns and display issues. [ 1255.343435] [drm] Please upgrade your BIOS to fix this. [ 1255.547522] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [ 1255.679268] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1255.682295] ata6.00: configured for UDMA/100 [ 1255.711453] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [ 1256.439184] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 1257.918551] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1257.931591] ata1.00: configured for UDMA/133 [ 1257.946594] sd 0:0:0:0: [sda] Starting disk [ 1257.981766] PM: resume of devices complete after 2646.920 msecs [ 1257.981957] PM: Finishing wakeup. [ 1257.981958] Restarting tasks ... done. [ 1258.004699] video LNXVIDEO:00: Restoring backlight state [ 1258.004706] video LNXVIDEO:01: Restoring backlight state [ 6726.140176] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 6726.156154] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 6726.364127] usb 4-1.2: new high-speed USB device number 3 using ehci-pci [ 6726.477226] usb 4-1.2: New USB device found, idVendor=04a9, idProduct=3110 [ 6726.477232] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6726.477235] usb 4-1.2: Product: Canon Digital Camera [ 6726.477238] usb 4-1.2: Manufacturer: Canon Inc. [ 6726.772010] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 6930.875401] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 6934.538267] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 6934.963418] fuse init (API version 7.22) [ 7223.388110] usb 4-1.2: USB disconnect, device number 3 [ 7225.754069] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7225.941977] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7225.985984] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7226.145935] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7226.257887] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7226.409842] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7226.609801] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7226.801722] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7226.993660] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7227.121599] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7227.309565] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7227.505558] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7227.693508] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7227.805431] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7228.037307] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7229.240958] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7229.436918] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7229.632890] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7229.832750] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7230.028717] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7230.228714] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7230.424597] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7230.620577] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7230.808504] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7230.868430] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7230.980398] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7231.116379] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7231.312280] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7231.424251] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7231.560310] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7231.628260] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7231.740146] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7231.876110] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7231.992063] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7232.184019] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7232.419934] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7232.611883] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7232.799840] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7232.995773] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7233.183694] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7233.415620] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7233.611675] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7234.791257] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7235.271047] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7235.382990] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7235.518938] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7235.578936] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7235.774928] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7235.970826] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7236.166772] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7236.362730] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7236.558634] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7236.670606] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7236.730572] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7236.842620] ehci-pci 0000:00:1d.0: setting latency timer to 64 [19819.813894] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [19819.813901] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [20270.684176] PM: Syncing filesystems ... done. [20271.057373] PM: Preparing system for mem sleep [20271.358617] Freezing user space processes ... (elapsed 0.001 seconds) done. [20271.359871] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [20271.361007] PM: Entering mem sleep [20271.361108] Suspending console(s) (use no_console_suspend to debug) [20271.377388] ehci-pci 0000:00:1a.0: setting latency timer to 64 [20271.393376] ehci-pci 0000:00:1d.0: setting latency timer to 64 [20271.409747] sd 0:0:0:0: [sda] Synchronizing SCSI cache [20271.409803] sd 0:0:0:0: [sda] Stopping disk [20271.461883] mei_me 0000:00:16.0: suspend [20272.404910] PM: suspend of devices complete after 995.722 msecs [20272.405075] PM: late suspend of devices complete after 0.162 msecs [20272.405284] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [20272.421071] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [20272.437053] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [20272.468901] PM: noirq suspend of devices complete after 63.844 msecs [20272.469273] ACPI: Preparing to enter system sleep state S3 [20272.470733] PM: Saving platform NVS memory [20272.471360] Disabling non-boot CPUs ... [20272.473154] smpboot: CPU 1 is now offline [20272.475846] ACPI: Low-level resume complete [20272.475937] PM: Restoring platform NVS memory [20272.476748] CPU0: Thermal monitoring handled by SMI [20272.476812] Enabling non-boot CPUs ... [20272.477036] smpboot: Booting Node 0 Processor 1 APIC 0x1 [20272.488413] CPU1: Thermal monitoring handled by SMI [20272.491108] CPU1 is up [20272.496407] ACPI: Waking up from system sleep state S3 [20272.499558] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [20272.552052] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [20272.584029] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [20272.615918] radeon 0000:01:00.0: Refused to change power state, currently in D3 [20272.664055] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [20272.664127] PM: noirq resume of devices complete after 159.240 msecs [20272.664285] PM: early resume of devices complete after 0.107 msecs [20272.664316] i915 0000:00:02.0: setting latency timer to 64 [20272.664406] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [20272.664657] ehci-pci 0000:00:1a.0: setting latency timer to 64 [20272.664819] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [20272.665156] ehci-pci 0000:00:1d.0: setting latency timer to 64 [20272.665199] ahci 0000:00:1f.2: setting latency timer to 64 [20272.666203] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [20272.671117] [drm] Wrong MCH_SSKPD value: 0x16040307 [20272.671117] [drm] This can cause pipe underruns and display issues. [20272.671118] [drm] Please upgrade your BIOS to fix this. [20272.880067] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [20273.007856] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [20273.010313] ata6.00: configured for UDMA/100 [20273.044038] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [20274.411387] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [20275.415039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [20275.427587] ata1.00: configured for UDMA/133 [20275.459034] sd 0:0:0:0: [sda] Starting disk [20275.492152] PM: resume of devices complete after 2828.759 msecs [20275.492303] PM: Finishing wakeup. [20275.492304] Restarting tasks ... done. [20275.536352] video LNXVIDEO:00: Restoring backlight state [20275.536357] video LNXVIDEO:01: Restoring backlight state [20518.854160] PM: Syncing filesystems ... done. [20519.233820] PM: Preparing system for mem sleep [20519.547188] Freezing user space processes ... (elapsed 0.001 seconds) done. [20519.548415] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [20519.549492] PM: Entering mem sleep [20519.549562] Suspending console(s) (use no_console_suspend to debug) [20519.561921] ehci-pci 0000:00:1a.0: setting latency timer to 64 [20519.577901] ehci-pci 0000:00:1d.0: setting latency timer to 64 [20519.594194] sd 0:0:0:0: [sda] Synchronizing SCSI cache [20519.594288] sd 0:0:0:0: [sda] Stopping disk [20519.646953] mei_me 0000:00:16.0: suspend [20520.565533] PM: suspend of devices complete after 971.830 msecs [20520.565644] PM: late suspend of devices complete after 0.108 msecs [20520.565852] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [20520.581695] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [20520.597677] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [20520.629525] PM: noirq suspend of devices complete after 63.899 msecs [20520.629904] ACPI: Preparing to enter system sleep state S3 [20520.631282] PM: Saving platform NVS memory [20520.632068] Disabling non-boot CPUs ... [20520.633881] smpboot: CPU 1 is now offline [20520.636743] ACPI: Low-level resume complete [20520.636833] PM: Restoring platform NVS memory [20520.637649] CPU0: Thermal monitoring handled by SMI [20520.637714] Enabling non-boot CPUs ... [20520.637935] smpboot: Booting Node 0 Processor 1 APIC 0x1 [20520.649590] CPU1: Thermal monitoring handled by SMI [20520.652282] CPU1 is up [20520.657528] ACPI: Waking up from system sleep state S3 [20520.661441] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [20520.712757] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [20520.744734] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [20520.776622] radeon 0000:01:00.0: Refused to change power state, currently in D3 [20520.824792] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [20520.824930] PM: noirq resume of devices complete after 160.432 msecs [20520.825236] PM: early resume of devices complete after 0.227 msecs [20520.825302] i915 0000:00:02.0: setting latency timer to 64 [20520.826272] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [20520.828702] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [20520.829082] ehci-pci 0000:00:1a.0: setting latency timer to 64 [20520.829503] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [20520.830084] ehci-pci 0000:00:1d.0: setting latency timer to 64 [20520.830129] ahci 0000:00:1f.2: setting latency timer to 64 [20520.840621] [drm] Wrong MCH_SSKPD value: 0x16040307 [20520.840623] [drm] This can cause pipe underruns and display issues. [20520.840625] [drm] Please upgrade your BIOS to fix this. [20521.040738] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [20521.172548] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [20521.175024] ata6.00: configured for UDMA/100 [20521.204669] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [20522.336373] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [20523.571787] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [20523.584736] ata1.00: configured for UDMA/133 [20523.599824] sd 0:0:0:0: [sda] Starting disk [20523.629417] PM: resume of devices complete after 2805.065 msecs [20523.629607] PM: Finishing wakeup. [20523.629608] Restarting tasks ... done. [20523.687909] video LNXVIDEO:00: Restoring backlight state [20523.687914] video LNXVIDEO:01: Restoring backlight state [22266.064596] ehci-pci 0000:00:1d.0: setting latency timer to 64 [22266.080528] ehci-pci 0000:00:1a.0: setting latency timer to 64 [22266.288455] usb 4-1.1: new full-speed USB device number 4 using ehci-pci [22266.713792] usb 4-1.1: New USB device found, idVendor=046d, idProduct=0a29 [22266.713803] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22266.713809] usb 4-1.1: Product: Logitech Wireless Headset [22266.713815] usb 4-1.1: Manufacturer: Logitech [22266.713827] usb 4-1.1: SerialNumber: 000E44B31572 [22266.776634] hidraw: raw HID events driver (C) Jiri Kosina [22266.804846] usbcore: registered new interface driver usbhid [22266.804849] usbhid: USB HID core driver [22266.847714] input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.3/input/input16 [22266.848761] hid-generic 0003:046D:0A29.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Logitech Logitech Wireless Headset] on usb-0000:00:1d.0-1.1/input3 [22267.000492] usbcore: registered new interface driver snd-usb-audio [22269.015594] ehci-pci 0000:00:1a.0: setting latency timer to 64 [30601.534197] usb 4-1.1: USB disconnect, device number 4 [30603.361996] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30603.477920] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30603.605961] ehci-pci 0000:00:1a.0: setting latency timer to 64 [30603.765900] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30603.973776] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30604.173836] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30604.385715] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30604.581583] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30604.777506] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30604.973478] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30605.089373] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30605.225315] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30605.317283] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30606.525013] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30606.640923] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30606.792867] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30606.988814] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30607.184766] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30607.380687] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30607.576639] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30607.772563] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30607.964502] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30608.088648] pci_pm_runtime_suspend(): hcd_pci_runtime_suspend+0x0/0xa [usbcore] returns -16 [30608.104564] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30608.308393] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30608.512434] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30608.708282] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30608.904267] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30609.100146] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30609.296081] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30609.492036] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30609.700008] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30609.895893] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30610.091827] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30610.207812] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30610.347731] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30610.543720] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30610.659698] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30610.811653] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30611.995243] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30612.503068] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30612.699001] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30612.894942] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30613.070926] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30613.278890] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30613.474859] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30613.710746] ehci-pci 0000:00:1d.0: setting latency timer to 64 [31012.937966] PM: Syncing filesystems ... done. [31013.157073] PM: Preparing system for mem sleep [31013.588152] Freezing user space processes ... (elapsed 0.001 seconds) done. [31013.589367] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [31013.590499] PM: Entering mem sleep [31013.590603] Suspending console(s) (use no_console_suspend to debug) [31013.604116] ehci-pci 0000:00:1a.0: setting latency timer to 64 [31013.620109] ehci-pci 0000:00:1d.0: setting latency timer to 64 [31013.636450] sd 0:0:0:0: [sda] Synchronizing SCSI cache [31013.636506] sd 0:0:0:0: [sda] Stopping disk [31013.688695] mei_me 0000:00:16.0: suspend [31014.707620] PM: suspend of devices complete after 1071.741 msecs [31014.707788] PM: late suspend of devices complete after 0.165 msecs [31014.707989] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [31014.723767] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [31014.739749] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [31014.771595] PM: noirq suspend of devices complete after 63.825 msecs [31014.771970] ACPI: Preparing to enter system sleep state S3 [31014.773446] PM: Saving platform NVS memory [31014.774094] Disabling non-boot CPUs ... [31014.775826] smpboot: CPU 1 is now offline [31014.778547] ACPI: Low-level resume complete [31014.778639] PM: Restoring platform NVS memory [31014.779452] CPU0: Thermal monitoring handled by SMI [31014.779532] Enabling non-boot CPUs ... [31014.779754] smpboot: Booting Node 0 Processor 1 APIC 0x1 [31014.791383] CPU1: Thermal monitoring handled by SMI [31014.794099] CPU1 is up [31014.799365] ACPI: Waking up from system sleep state S3 [31014.802561] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [31014.854762] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [31014.886739] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [31014.918628] radeon 0000:01:00.0: Refused to change power state, currently in D3 [31014.966753] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [31014.966821] PM: noirq resume of devices complete after 158.859 msecs [31014.966975] PM: early resume of devices complete after 0.104 msecs [31014.967005] i915 0000:00:02.0: setting latency timer to 64 [31014.968027] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [31014.970662] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [31014.971060] ehci-pci 0000:00:1a.0: setting latency timer to 64 [31014.971227] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [31014.971650] ehci-pci 0000:00:1d.0: setting latency timer to 64 [31014.971696] ahci 0000:00:1f.2: setting latency timer to 64 [31014.973885] [drm] Wrong MCH_SSKPD value: 0x16040307 [31014.973886] [drm] This can cause pipe underruns and display issues. [31014.973886] [drm] Please upgrade your BIOS to fix this. [31015.182686] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [31015.314542] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [31015.317028] ata6.00: configured for UDMA/100 [31015.346629] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [31016.018514] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [31017.665808] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [31017.678678] ata1.00: configured for UDMA/133 [31017.693854] sd 0:0:0:0: [sda] Starting disk [31017.729433] PM: resume of devices complete after 2763.328 msecs [31017.729623] PM: Finishing wakeup. [31017.729624] Restarting tasks ... done. [31017.767210] video LNXVIDEO:00: Restoring backlight state [31017.767216] video LNXVIDEO:01: Restoring backlight state [33354.643190] PM: Syncing filesystems ... done. [33354.916704] PM: Preparing system for mem sleep [33355.322372] Freezing user space processes ... (elapsed 0.001 seconds) done. [33355.323592] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [33355.324753] PM: Entering mem sleep [33355.324883] Suspending console(s) (use no_console_suspend to debug) [33355.338188] ehci-pci 0000:00:1a.0: setting latency timer to 64 [33355.354145] ehci-pci 0000:00:1d.0: setting latency timer to 64 [33355.370501] sd 0:0:0:0: [sda] Synchronizing SCSI cache [33355.370565] sd 0:0:0:0: [sda] Stopping disk [33355.422775] mei_me 0000:00:16.0: suspend [33356.385720] PM: suspend of devices complete after 1015.762 msecs [33356.385859] PM: late suspend of devices complete after 0.136 msecs [33356.386052] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [33356.401855] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [33356.417841] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [33356.449683] PM: noirq suspend of devices complete after 63.841 msecs [33356.450058] ACPI: Preparing to enter system sleep state S3 [33356.451529] PM: Saving platform NVS memory [33356.452197] Disabling non-boot CPUs ... [33356.453899] smpboot: CPU 1 is now offline [33356.456639] ACPI: Low-level resume complete [33356.456730] PM: Restoring platform NVS memory [33356.457539] CPU0: Thermal monitoring handled by SMI [33356.457604] Enabling non-boot CPUs ... [33356.457827] smpboot: Booting Node 0 Processor 1 APIC 0x1 [33356.469461] CPU1: Thermal monitoring handled by SMI [33356.472158] CPU1 is up [33356.477386] ACPI: Waking up from system sleep state S3 [33356.486104] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [33356.536824] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [33356.568808] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [33356.600704] radeon 0000:01:00.0: Refused to change power state, currently in D3 [33356.648838] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [33356.648907] PM: noirq resume of devices complete after 159.750 msecs [33356.649062] PM: early resume of devices complete after 0.104 msecs [33356.649092] i915 0000:00:02.0: setting latency timer to 64 [33356.649241] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [33356.649404] ehci-pci 0000:00:1a.0: setting latency timer to 64 [33356.649601] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [33356.649819] ehci-pci 0000:00:1d.0: setting latency timer to 64 [33356.649889] ahci 0000:00:1f.2: setting latency timer to 64 [33356.649923] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [33356.656313] [drm] Wrong MCH_SSKPD value: 0x16040307 [33356.656314] [drm] This can cause pipe underruns and display issues. [33356.656314] [drm] Please upgrade your BIOS to fix this. [33356.860899] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [33356.992632] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [33356.995057] ata6.00: configured for UDMA/100 [33357.024824] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [33358.280390] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [33359.391870] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [33359.404801] ata1.00: configured for UDMA/133 [33359.419908] sd 0:0:0:0: [sda] Starting disk [33359.452618] PM: resume of devices complete after 2804.439 msecs [33359.452808] PM: Finishing wakeup. [33359.452810] Restarting tasks ... done. [33359.504709] video LNXVIDEO:00: Restoring backlight state [33359.504715] video LNXVIDEO:01: Restoring backlight state [38503.425463] PM: Syncing filesystems ... done. [38503.640434] PM: Preparing system for mem sleep [38504.039244] Freezing user space processes ... (elapsed 0.001 seconds) done. [38504.040497] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [38504.041672] PM: Entering mem sleep [38504.041789] Suspending console(s) (use no_console_suspend to debug) [38504.055913] ehci-pci 0000:00:1a.0: setting latency timer to 64 [38504.071887] ehci-pci 0000:00:1d.0: setting latency timer to 64 [38504.088249] sd 0:0:0:0: [sda] Synchronizing SCSI cache [38504.088306] sd 0:0:0:0: [sda] Stopping disk [38504.143672] mei_me 0000:00:16.0: suspend [38505.171383] PM: suspend of devices complete after 1083.730 msecs [38505.171550] PM: late suspend of devices complete after 0.163 msecs [38505.171753] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [38505.187540] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [38505.203522] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [38505.235370] PM: noirq suspend of devices complete after 63.838 msecs [38505.235719] ACPI: Preparing to enter system sleep state S3 [38505.237183] PM: Saving platform NVS memory [38505.237868] Disabling non-boot CPUs ... [38505.239562] smpboot: CPU 1 is now offline [38505.241152] ACPI: Low-level resume complete [38505.241199] PM: Restoring platform NVS memory [38505.241731] CPU0: Thermal monitoring handled by SMI [38505.241761] Enabling non-boot CPUs ... [38505.241862] smpboot: Booting Node 0 Processor 1 APIC 0x1 [38505.253061] CPU1: Thermal monitoring handled by SMI [38505.255387] CPU1 is up [38505.257667] ACPI: Waking up from system sleep state S3 [38505.260072] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [38505.309081] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [38505.341059] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [38505.372953] radeon 0000:01:00.0: Refused to change power state, currently in D3 [38505.421102] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [38505.421169] PM: noirq resume of devices complete after 158.324 msecs [38505.421324] PM: early resume of devices complete after 0.103 msecs [38505.421354] i915 0000:00:02.0: setting latency timer to 64 [38505.422261] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [38505.422435] ehci-pci 0000:00:1a.0: setting latency timer to 64 [38505.422595] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [38505.422777] ehci-pci 0000:00:1d.0: setting latency timer to 64 [38505.422801] ahci 0000:00:1f.2: setting latency timer to 64 [38505.423223] usb usb2: root hub lost power or was reset [38505.423226] usb usb3: root hub lost power or was reset [38505.423544] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X [38505.423551] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X [38505.423558] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X [38505.428467] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [38505.429674] [drm] Wrong MCH_SSKPD value: 0x16040307 [38505.429675] [drm] This can cause pipe underruns and display issues. [38505.429676] [drm] Please upgrade your BIOS to fix this. [38505.637145] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [38505.756894] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [38505.759939] ata6.00: configured for UDMA/100 [38505.801075] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [38506.664681] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [38508.172073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [38508.184717] ata1.00: configured for UDMA/133 [38508.216083] sd 0:0:0:0: [sda] Starting disk [38508.247639] PM: resume of devices complete after 2827.206 msecs [38508.247792] PM: Finishing wakeup. [38508.247793] Restarting tasks ... done. [38508.317247] video LNXVIDEO:00: Restoring backlight state [38508.317253] video LNXVIDEO:01: Restoring backlight state [39760.410465] PM: Syncing filesystems ... done. [39760.652555] PM: Preparing system for mem sleep [39761.074351] Freezing user space processes ... (elapsed 0.001 seconds) done. [39761.075578] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [39761.076644] PM: Entering mem sleep [39761.076704] Suspending console(s) (use no_console_suspend to debug) [39761.091718] ehci-pci 0000:00:1a.0: setting latency timer to 64 [39761.107684] ehci-pci 0000:00:1d.0: setting latency timer to 64 [39761.124102] sd 0:0:0:0: [sda] Synchronizing SCSI cache [39761.124165] sd 0:0:0:0: [sda] Stopping disk [39761.176898] mei_me 0000:00:16.0: suspend [39762.199319] PM: suspend of devices complete after 1075.829 msecs [39762.199482] PM: late suspend of devices complete after 0.160 msecs [39762.199666] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [39762.215468] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [39762.231456] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [39762.263298] PM: noirq suspend of devices complete after 63.833 msecs [39762.263676] ACPI: Preparing to enter system sleep state S3 [39762.335300] PM: Saving platform NVS memory [39762.336147] Disabling non-boot CPUs ... [39762.439176] smpboot: CPU 1 is now offline [39762.441955] ACPI: Low-level resume complete [39762.442044] PM: Restoring platform NVS memory [39762.442827] CPU0: Thermal monitoring handled by SMI [39762.442893] Enabling non-boot CPUs ... [39762.443118] smpboot: Booting Node 0 Processor 1 APIC 0x1 [39762.454743] CPU1: Thermal monitoring handled by SMI [39762.457535] CPU1 is up [39762.463504] ACPI: Waking up from system sleep state S3 [39762.467313] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [39762.518373] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [39762.550348] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [39762.582236] radeon 0000:01:00.0: Refused to change power state, currently in D3 [39762.630402] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [39762.630537] PM: noirq resume of devices complete after 160.457 msecs [39762.630831] PM: early resume of devices complete after 0.235 msecs [39762.631191] ahci 0000:00:1f.2: setting latency timer to 64 [39762.631340] ehci-pci 0000:00:1d.0: setting latency timer to 64 [39762.631481] i915 0000:00:02.0: setting latency timer to 64 [39762.634333] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [39762.635548] ehci-pci 0000:00:1a.0: setting latency timer to 64 [39762.635978] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [39762.636308] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [39762.647307] [drm] Wrong MCH_SSKPD value: 0x16040307 [39762.647309] [drm] This can cause pipe underruns and display issues. [39762.647311] [drm] Please upgrade your BIOS to fix this. [39762.846451] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [39762.978162] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [39762.980655] ata6.00: configured for UDMA/100 [39763.010191] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [39764.257896] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [39765.373423] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [39765.386332] ata1.00: configured for UDMA/133 [39765.401441] sd 0:0:0:0: [sda] Starting disk [39765.430569] PM: resume of devices complete after 2800.620 msecs [39765.430762] PM: Finishing wakeup. [39765.430764] Restarting tasks ... done. [39765.481566] video LNXVIDEO:00: Restoring backlight state [39765.481572] video LNXVIDEO:01: Restoring backlight state [40801.786654] radeon 0000:01:00.0: Invalid ROM contents [41244.443826] radeon 0000:01:00.0: Invalid ROM contents [45940.694343] PM: Syncing filesystems ... done. [45941.060115] PM: Preparing system for mem sleep [45941.466033] Freezing user space processes ... (elapsed 0.001 seconds) done. [45941.467374] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [45941.468367] PM: Entering mem sleep [45941.468481] Suspending console(s) (use no_console_suspend to debug) [45941.482982] ehci-pci 0000:00:1a.0: setting latency timer to 64 [45941.498982] ehci-pci 0000:00:1d.0: setting latency timer to 64 [45941.515388] sd 0:0:0:0: [sda] Synchronizing SCSI cache [45941.515840] sd 0:0:0:0: [sda] Stopping disk [45941.569251] mei_me 0000:00:16.0: suspend [45942.626467] PM: suspend of devices complete after 1111.727 msecs [45942.626577] PM: late suspend of devices complete after 0.108 msecs [45942.626729] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [45942.642639] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [45942.658623] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [45942.690487] PM: noirq suspend of devices complete after 63.928 msecs [45942.690768] ACPI: Preparing to enter system sleep state S3 [45942.692196] PM: Saving platform NVS memory [45942.692875] Disabling non-boot CPUs ... [45942.794331] smpboot: CPU 1 is now offline [45942.797135] ACPI: Low-level resume complete [45942.797224] PM: Restoring platform NVS memory [45942.798015] CPU0: Thermal monitoring handled by SMI [45942.798129] Enabling non-boot CPUs ... [45942.798355] smpboot: Booting Node 0 Processor 1 APIC 0x1 [45942.810092] CPU1: Thermal monitoring handled by SMI [45942.812861] CPU1 is up [45942.818114] ACPI: Waking up from system sleep state S3 [45942.822378] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [45942.873567] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [45942.905520] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [45942.937406] radeon 0000:01:00.0: Refused to change power state, currently in D3 [45942.985574] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [45942.985708] PM: noirq resume of devices complete after 160.279 msecs [45942.985996] PM: early resume of devices complete after 0.229 msecs [45942.986089] i915 0000:00:02.0: setting latency timer to 64 [45942.986377] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [45942.986758] ehci-pci 0000:00:1a.0: setting latency timer to 64 [45942.987131] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [45942.987632] ehci-pci 0000:00:1d.0: setting latency timer to 64 [45942.987679] ahci 0000:00:1f.2: setting latency timer to 64 [45943.003182] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [45943.005089] [drm] Wrong MCH_SSKPD value: 0x16040307 [45943.005091] [drm] This can cause pipe underruns and display issues. [45943.005093] [drm] Please upgrade your BIOS to fix this. [45943.197658] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [45943.329340] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [45943.331734] ata6.00: configured for UDMA/100 [45943.361580] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [45944.317212] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [45945.728609] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [45945.741435] ata1.00: configured for UDMA/133 [45945.772607] sd 0:0:0:0: [sda] Starting disk [45945.806533] PM: resume of devices complete after 2821.426 msecs [45945.806727] PM: Finishing wakeup. [45945.806728] Restarting tasks ... done. [45945.863750] video LNXVIDEO:00: Restoring backlight state [45945.863756] video LNXVIDEO:01: Restoring backlight state [45964.869249] PM: Syncing filesystems ... done. [45965.343700] PM: Preparing system for mem sleep [45965.502612] Freezing user space processes ... (elapsed 0.001 seconds) done. [45965.503929] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [45965.505094] PM: Entering mem sleep [45965.505176] Suspending console(s) (use no_console_suspend to debug) [45965.518516] ehci-pci 0000:00:1a.0: setting latency timer to 64 [45965.534508] ehci-pci 0000:00:1d.0: setting latency timer to 64 [45965.550947] sd 0:0:0:0: [sda] Synchronizing SCSI cache [45965.551019] sd 0:0:0:0: [sda] Stopping disk [45965.604128] mei_me 0000:00:16.0: suspend [45966.649974] PM: suspend of devices complete after 1099.694 msecs [45966.650113] PM: late suspend of devices complete after 0.136 msecs [45966.650297] xhci_hcd 0000:19:00.0: System wakeup enabled by ACPI [45966.666170] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [45966.682158] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [45966.714024] PM: noirq suspend of devices complete after 63.929 msecs [45966.714325] ACPI: Preparing to enter system sleep state S3 [45966.715770] PM: Saving platform NVS memory [45966.716470] Disabling non-boot CPUs ... [45966.817866] smpboot: CPU 1 is now offline [45966.820685] ACPI: Low-level resume complete [45966.820778] PM: Restoring platform NVS memory [45966.821574] CPU0: Thermal monitoring handled by SMI [45966.821686] Enabling non-boot CPUs ... [45966.821912] smpboot: Booting Node 0 Processor 1 APIC 0x1 [45966.833381] CPU1: Thermal monitoring handled by SMI [45966.836141] CPU1 is up [45966.841441] ACPI: Waking up from system sleep state S3 [45966.845285] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [45966.893119] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [45966.925077] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [45966.956965] radeon 0000:01:00.0: Refused to change power state, currently in D3 [45967.005134] xhci_hcd 0000:19:00.0: System wakeup disabled by ACPI [45967.005271] PM: noirq resume of devices complete after 157.224 msecs [45967.005566] PM: early resume of devices complete after 0.235 msecs [45967.005657] i915 0000:00:02.0: setting latency timer to 64 [45967.006827] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [45967.007297] ehci-pci 0000:00:1a.0: setting latency timer to 64 [45967.007671] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [45967.008105] ehci-pci 0000:00:1d.0: setting latency timer to 64 [45967.008152] ahci 0000:00:1f.2: setting latency timer to 64 [45967.023853] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [45967.025955] [drm] Wrong MCH_SSKPD value: 0x16040307 [45967.025957] [drm] This can cause pipe underruns and display issues. [45967.025958] [drm] Please upgrade your BIOS to fix this. [45967.217181] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [45967.348902] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [45967.351938] ata6.00: configured for UDMA/100 [45967.381113] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci [45968.312637] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [45969.692116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [45969.704817] ata1.00: configured for UDMA/133 [45969.736120] sd 0:0:0:0: [sda] Starting disk [45969.769492] PM: resume of devices complete after 2764.797 msecs [45969.769641] PM: Finishing wakeup. [45969.769643] Restarting tasks ... done. [45969.828236] video LNXVIDEO:00: Restoring backlight state [45969.828242] video LNXVIDEO:01: Restoring backlight state