[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd49dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd49e000-0x00000000de048fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de049000-0x00000000de0d3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de0d4000-0x00000000de177fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de178000-0x00000000de976fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de977000-0x00000000de977fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de978000-0x00000000de9bafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de9bb000-0x00000000df3f5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df3f6000-0x00000000df7f1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme4, BIOS P2.80 03/31/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FF0000000 write-back [ 0.000000] 2 base 410000000 mask FF8000000 write-back [ 0.000000] 3 base 418000000 mask FFC000000 write-back [ 0.000000] 4 base 41C000000 mask FFE000000 write-back [ 0.000000] 5 base 41E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [ffff8800000fd8e0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01bd7000, 0x01bd7fff] PGTABLE [ 0.000000] BRK [0x01bd8000, 0x01bd8fff] PGTABLE [ 0.000000] BRK [0x01bd9000, 0x01bd9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41ee00000-0x41effffff] [ 0.000000] [mem 0x41ee00000-0x41effffff] page 2M [ 0.000000] BRK [0x01bda000, 0x01bdafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41edfffff] [ 0.000000] [mem 0x41c000000-0x41edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdd49dfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdd3fffff] page 2M [ 0.000000] [mem 0xdd400000-0xdd49dfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xde049000-0xde0d3fff] [ 0.000000] [mem 0xde049000-0xde0d3fff] page 4k [ 0.000000] BRK [0x01bdb000, 0x01bdbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xde977000-0xde977fff] [ 0.000000] [mem 0xde977000-0xde977fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xde9bb000-0xdf3f5fff] [ 0.000000] [mem 0xde9bb000-0xde9fffff] page 4k [ 0.000000] [mem 0xdea00000-0xdf1fffff] page 2M [ 0.000000] [mem 0xdf200000-0xdf3f5fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdf7f2000-0xdf7fffff] [ 0.000000] [mem 0xdf7f2000-0xdf7fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x37bc2000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000de15c080 0007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000de165f70 0010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000de15c190 09DDD (v02 ALASKA A M I 00000022 INTL 20051117) [ 0.000000] ACPI: FACS 00000000de176080 00040 [ 0.000000] ACPI: APIC 00000000de166080 00092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000de166118 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000de166160 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000de1661a0 007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112) [ 0.000000] ACPI: AAFT 00000000de166988 00112 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000de166aa0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000de166ad8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 00000000de166e48 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000de1677f8 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: BGRT 00000000de168290 00038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41effffff] [ 0.000000] NODE_DATA [mem 0x41efe9000-0x41efecfff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdd49dfff] [ 0.000000] node 0: [mem 0xde049000-0xde0d3fff] [ 0.000000] node 0: [mem 0xde977000-0xde977fff] [ 0.000000] node 0: [mem 0xde9bb000-0xdf3f5fff] [ 0.000000] node 0: [mem 0xdf7f2000-0xdf7fffff] [ 0.000000] node 0: [mem 0x100000000-0x41effffff] [ 0.000000] On node 0 totalpages: 4181775 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14142 pages used for memmap [ 0.000000] DMA32 zone: 905075 pages, LIFO batch:31 [ 0.000000] Normal zone: 51136 pages used for memmap [ 0.000000] Normal zone: 3272704 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dd49e000 - 00000000de049000 [ 0.000000] PM: Registered nosave memory: 00000000de0d4000 - 00000000de178000 [ 0.000000] PM: Registered nosave memory: 00000000de178000 - 00000000de977000 [ 0.000000] PM: Registered nosave memory: 00000000de978000 - 00000000de9bb000 [ 0.000000] PM: Registered nosave memory: 00000000df3f6000 - 00000000df7f2000 [ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000 [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88041ec00000 s72064 r8192 d22144 u262144 [ 0.000000] pcpu-alloc: s72064 r8192 d22144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116412 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda6 rootfstype=ext4 video=DVI-I-1:1920x1080 radeon.pcie_gen2=1 radeon.audio=0 pci=nocrs console=tty1 quiet splash=silent,fadein,theme:natural-gentoo [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16381348k/17285120k available (4553k kernel code, 558020k absent, 345752k reserved, 6138k data, 772k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty1] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3399.984 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.96 BogoMIPS (lpj=3399984) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000637] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.002926] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.003909] Mount-cache hash table entries: 256 [ 0.004039] CPU: Physical Processor ID: 0 [ 0.004039] CPU: Processor Core ID: 0 [ 0.004042] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.004044] mce: CPU supports 9 MCE banks [ 0.004053] CPU0: Thermal monitoring enabled (TM1) [ 0.004059] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.004138] Freeing SMP alternatives: 20k freed [ 0.004142] ACPI: Core revision 20130328 [ 0.008815] ACPI: All ACPI Tables successfully acquired [ 0.075680] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085675] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07) [ 0.085680] TSC deadline timer enabled [ 0.085688] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.085694] ... version: 3 [ 0.085695] ... bit width: 48 [ 0.085695] ... generic registers: 4 [ 0.085696] ... value mask: 0000ffffffffffff [ 0.085696] ... max period: 000000007fffffff [ 0.085697] ... fixed-purpose events: 3 [ 0.085698] ... event mask: 000000070000000f [ 0.089736] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK [ 0.182460] Brought up 8 CPUs [ 0.182462] smpboot: Total of 8 processors activated (54399.74 BogoMIPS) [ 0.187985] devtmpfs: initialized [ 0.188154] PM: Registering ACPI NVS region [mem 0xde0d4000-0xde177fff] (671744 bytes) [ 0.188166] PM: Registering ACPI NVS region [mem 0xde978000-0xde9bafff] (274432 bytes) [ 0.188272] xor: automatically using best checksumming function: [ 0.197833] avx : 22816.000 MB/sec [ 0.197866] NET: Registered protocol family 16 [ 0.198112] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.198113] ACPI: bus type PCI registered [ 0.198163] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.198165] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.201016] PCI: Using configuration type 1 for base access [ 0.203057] bio: create slab at 0 [ 0.219843] raid6: sse2x1 9144 MB/s [ 0.236842] raid6: sse2x2 11351 MB/s [ 0.253847] raid6: sse2x4 13042 MB/s [ 0.253848] raid6: using algorithm sse2x4 (13042 MB/s) [ 0.253849] raid6: using ssse3x2 recovery algorithm [ 0.253918] ACPI: Added _OSI(Module Device) [ 0.253919] ACPI: Added _OSI(Processor Device) [ 0.253920] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.253921] ACPI: Added _OSI(Processor Aggregator Device) [ 0.255050] ACPI: EC: Look up EC in DSDT [ 0.256260] ACPI: Executed 1 blocks of module-level executable AML code [ 0.262206] ACPI: SSDT 00000000ddff6018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.262507] ACPI: Dynamic OEM Table Load: [ 0.262508] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.267082] ACPI: SSDT 00000000ddff7a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.267405] ACPI: Dynamic OEM Table Load: [ 0.267407] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.270972] ACPI: SSDT 00000000ddff8c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.271262] ACPI: Dynamic OEM Table Load: [ 0.271263] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.275912] ACPI: Interpreter enabled [ 0.275917] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.275920] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.275930] ACPI: (supports S0 S3 S4 S5) [ 0.275931] ACPI: Using IOAPIC for interrupt routing [ 0.275989] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.276075] ACPI: No dock devices found. [ 0.283551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.284038] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.284039] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.284041] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.284042] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.284043] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.284044] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.284046] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) [ 0.284047] acpi PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored) [ 0.284048] acpi PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored) [ 0.284050] acpi PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff] (ignored) [ 0.284051] PCI: root bus 00: using default resources [ 0.284083] PCI host bridge to bus 0000:00 [ 0.284085] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.284087] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.284088] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.284095] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.284185] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.284209] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.284238] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.284300] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.284320] pci 0000:00:14.0: reg 10: [mem 0xf7f00000-0xf7f0ffff 64bit] [ 0.284387] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.284427] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.284469] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.284490] pci 0000:00:16.0: reg 10: [mem 0xf7f16000-0xf7f1600f 64bit] [ 0.284561] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.284654] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.284673] pci 0000:00:1a.0: reg 10: [mem 0xf7f14000-0xf7f143ff] [ 0.284757] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.284810] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.284850] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.284926] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.284955] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.284996] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.285070] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.285102] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.285143] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.285216] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.285248] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.285287] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400 [ 0.285360] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.285394] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.285432] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.285506] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.285541] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.285582] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.285601] pci 0000:00:1d.0: reg 10: [mem 0xf7f13000-0xf7f133ff] [ 0.285685] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.285736] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.285776] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.285924] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.285940] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077] [ 0.285947] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063] [ 0.285953] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057] [ 0.285960] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043] [ 0.285966] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 0.285973] pci 0000:00:1f.2: reg 24: [mem 0xf7f12000-0xf7f127ff] [ 0.286013] pci 0000:00:1f.2: PME# supported from D3hot [ 0.286087] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.286101] pci 0000:00:1f.3: reg 10: [mem 0xf7f11000-0xf7f110ff 64bit] [ 0.286120] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 0.286244] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000 [ 0.286255] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.286263] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] [ 0.286269] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.286279] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] [ 0.286306] pci 0000:01:00.0: supports D1 D2 [ 0.286348] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300 [ 0.286359] pci 0000:01:00.1: reg 10: [mem 0xf7e40000-0xf7e43fff 64bit] [ 0.286408] pci 0000:01:00.1: supports D1 D2 [ 0.287891] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.287896] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.287899] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.287904] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.287999] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.288088] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601 [ 0.288106] pci 0000:03:00.0: reg 10: [io 0xd050-0xd057] [ 0.288119] pci 0000:03:00.0: reg 14: [io 0xd040-0xd043] [ 0.288131] pci 0000:03:00.0: reg 18: [io 0xd030-0xd037] [ 0.288144] pci 0000:03:00.0: reg 1c: [io 0xd020-0xd023] [ 0.288157] pci 0000:03:00.0: reg 20: [io 0xd000-0xd01f] [ 0.288170] pci 0000:03:00.0: reg 24: [mem 0xf7d00000-0xf7d001ff] [ 0.289900] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.289906] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.289911] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.290031] pci 0000:04:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.290059] pci 0000:04:00.0: reg 10: [mem 0xf0110000-0xf011ffff 64bit pref] [ 0.290080] pci 0000:04:00.0: reg 18: [mem 0xf0100000-0xf010ffff 64bit pref] [ 0.290121] pci 0000:04:00.0: reg 30: [mem 0xf7c00000-0xf7c007ff pref] [ 0.290199] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.291905] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.291912] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.291920] pci 0000:00:1c.4: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.292021] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060401 [ 0.292140] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.292172] pci 0000:00:1c.5: PCI bridge to [bus 05-06] [ 0.292175] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.292178] pci 0000:00:1c.5: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.292183] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.292262] pci 0000:06:00.0: [109e:036e] type 00 class 0x040000 [ 0.292296] pci 0000:06:00.0: reg 10: [mem 0xf0001000-0xf0001fff pref] [ 0.292511] pci 0000:06:00.1: [109e:0878] type 00 class 0x048000 [ 0.292546] pci 0000:06:00.1: reg 10: [mem 0xf0000000-0xf0000fff pref] [ 0.292769] pci 0000:06:01.0: [1102:0004] type 00 class 0x040100 [ 0.292799] pci 0000:06:01.0: reg 10: [io 0xc000-0xc03f] [ 0.292944] pci 0000:06:01.0: supports D1 D2 [ 0.292995] pci 0000:06:01.1: [1102:7003] type 00 class 0x098000 [ 0.293022] pci 0000:06:01.1: reg 10: [io 0xc040-0xc047] [ 0.293163] pci 0000:06:01.1: supports D1 D2 [ 0.293215] pci 0000:06:01.2: [1102:4001] type 00 class 0x0c0010 [ 0.293246] pci 0000:06:01.2: reg 10: [mem 0xf7b04000-0xf7b047ff] [ 0.293262] pci 0000:06:01.2: reg 14: [mem 0xf7b00000-0xf7b03fff] [ 0.293392] pci 0000:06:01.2: supports D1 D2 [ 0.293393] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot [ 0.293514] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.293524] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] [ 0.293529] pci 0000:05:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.293538] pci 0000:05:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.293539] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode) [ 0.293540] pci 0000:05:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] (subtractive decode) [ 0.293542] pci 0000:05:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] (subtractive decode) [ 0.293543] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.293640] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.293668] pci 0000:07:00.0: reg 10: [mem 0xf7a00000-0xf7a07fff 64bit] [ 0.293811] pci 0000:07:00.0: PME# supported from D3hot D3cold [ 0.294913] pci 0000:00:1c.7: PCI bridge to [bus 07] [ 0.294921] pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.295059] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.295257] acpi PNP0A08:00: ACPI _OSC control (0x18) granted [ 0.295734] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.295778] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.295822] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.295865] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.295910] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.295953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.295995] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.296036] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.296224] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.296229] acpi root: \_SB_.PCI0 notify handler is installed [ 0.296268] Found 1 acpi root devices [ 0.296341] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.296343] vgaarb: loaded [ 0.296343] vgaarb: bridge control possible 0000:01:00.0 [ 0.296412] SCSI subsystem initialized [ 0.296413] ACPI: bus type ATA registered [ 0.296449] libata version 3.00 loaded. [ 0.296538] pps_core: LinuxPPS API ver. 1 registered [ 0.296539] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.296551] PTP clock support registered [ 0.296577] PCI: Using ACPI for IRQ routing [ 0.297949] PCI: pci_cache_line_size set to 64 bytes [ 0.298021] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.298022] e820: reserve RAM buffer [mem 0xdd49e000-0xdfffffff] [ 0.298023] e820: reserve RAM buffer [mem 0xde0d4000-0xdfffffff] [ 0.298024] e820: reserve RAM buffer [mem 0xde978000-0xdfffffff] [ 0.298025] e820: reserve RAM buffer [mem 0xdf3f6000-0xdfffffff] [ 0.298026] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] [ 0.298027] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.298168] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.298172] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.300182] Switching to clocksource hpet [ 0.302124] pnp: PnP ACPI init [ 0.302131] ACPI: bus type PNP registered [ 0.302187] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.302190] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.302205] pnp 00:01: [dma 4] [ 0.302230] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.302259] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.302340] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.302389] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.302390] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.302392] system 00:04: [io 0xffff] has been reserved [ 0.302393] system 00:04: [io 0xffff] has been reserved [ 0.302395] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.302396] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.302397] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.302399] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.302400] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.302433] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.302483] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.302485] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.302559] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.302561] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.302738] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.302740] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.302773] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.302821] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.302934] pnp 00:0b: [dma 0 disabled] [ 0.302984] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.303183] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.303185] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.303187] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.303188] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.303189] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.303191] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.303192] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.303199] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.303200] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 0.303202] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.303203] system 00:0c: [mem 0xf0200000-0xf0200fff] has been reserved [ 0.303205] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.303312] pnp: PnP ACPI: found 13 devices [ 0.303313] ACPI: bus type PNP unregistered [ 0.307934] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.307936] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.307938] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.307940] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.307943] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.307953] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.307955] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.307959] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.307966] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.307970] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.307973] pci 0000:00:1c.4: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.307978] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.307981] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] [ 0.307988] pci 0000:05:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.307993] pci 0000:05:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.308002] pci 0000:00:1c.5: PCI bridge to [bus 05-06] [ 0.308004] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.308008] pci 0000:00:1c.5: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.308011] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.308016] pci 0000:00:1c.7: PCI bridge to [bus 07] [ 0.308020] pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.308339] pci 0000:05:00.0: setting latency timer to 64 [ 0.308397] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.308399] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.308400] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.308401] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.308402] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.308404] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.308405] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.308406] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.308407] pci_bus 0000:04: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.308408] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.308410] pci_bus 0000:05: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.308411] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.308412] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.308413] pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.308414] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.308415] pci_bus 0000:06: resource 4 [io 0xc000-0xcfff] [ 0.308417] pci_bus 0000:06: resource 5 [mem 0xf7b00000-0xf7bfffff] [ 0.308418] pci_bus 0000:06: resource 6 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.308419] pci_bus 0000:07: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.308440] NET: Registered protocol family 2 [ 0.308605] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.308837] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.308918] TCP: Hash tables configured (established 131072 bind 65536) [ 0.308932] TCP: reno registered [ 0.308945] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.308986] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.309053] NET: Registered protocol family 1 [ 0.341302] pci 0000:01:00.0: Boot video device [ 0.341385] PCI: CLS 64 bytes, default 64 [ 0.341410] Unpacking initramfs... [ 0.387167] Freeing initrd memory: 4280k freed [ 0.387476] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.387478] software IO TLB [mem 0xd949e000-0xdd49e000] (64MB) mapped at [ffff8800d949e000-ffff8800dd49dfff] [ 0.387883] audit: initializing netlink socket (disabled) [ 0.387889] type=2000 audit(1374436804.315:1): initialized [ 0.388463] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.390806] NTFS driver 2.1.30 [Flags: R/O]. [ 0.390862] fuse init (API version 7.22) [ 0.391155] bio: create slab at 1 [ 0.391298] Btrfs loaded [ 0.391301] msgmni has been set to 32003 [ 0.391447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.391448] io scheduler noop registered [ 0.391449] io scheduler deadline registered [ 0.391480] io scheduler cfq registered (default) [ 0.391547] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.391862] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.412460] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.412879] intel_idle: MWAIT substates: 0x1120 [ 0.412880] intel_idle: v0.4 model 0x2A [ 0.412880] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.412920] [drm] Initialized drm 1.1.0 20060810 [ 0.412942] [drm] radeon kernel modesetting enabled. [ 0.413076] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1002:0x0B00). [ 0.413088] [drm] register mmio base: 0xF7E20000 [ 0.413089] [drm] register mmio size: 131072 [ 0.413155] ATOM BIOS: CAYMAN [ 0.413199] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 0.413200] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 0.413203] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 0.413204] [drm] Detected VRAM RAM=2048M, BAR=256M [ 0.413205] [drm] RAM width 256bits DDR [ 0.413221] [TTM] Zone kernel: Available graphics memory: 8192824 kiB [ 0.413221] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 0.413222] [TTM] Initializing pool allocator [ 0.413225] [TTM] Initializing DMA pool allocator [ 0.413238] [drm] radeon: 2048M of VRAM memory ready [ 0.413239] [drm] radeon: 512M of GTT memory ready. [ 0.414282] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.414575] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 0.414628] [drm] Loading CAYMAN Microcode [ 0.427593] [drm] PCIE GART of 512M enabled (table at 0x0000000000273000). [ 0.427676] radeon 0000:01:00.0: WB enabled [ 0.427678] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 0.427680] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 0.427681] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 0.427682] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 0.427684] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 0.427685] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 0.427687] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.427687] [drm] Driver supports precise vblank timestamp query. [ 0.427698] radeon 0000:01:00.0: irq 41 for MSI/MSI-X [ 0.427704] radeon 0000:01:00.0: radeon: using MSI. [ 0.427920] [drm] radeon: irq initialized. [ 0.446783] [drm] ring test on 0 succeeded in 3 usecs [ 0.446843] [drm] ring test on 3 succeeded in 2 usecs [ 0.446850] [drm] ring test on 4 succeeded in 1 usecs [ 0.632820] [drm] ring test on 5 succeeded in 1 usecs [ 0.632822] [drm] UVD initialized successfully. [ 0.634307] [drm] ib test on ring 0 succeeded in 0 usecs [ 0.634728] [drm] ib test on ring 3 succeeded in 0 usecs [ 0.635154] [drm] ib test on ring 4 succeeded in 1 usecs [ 0.787046] [drm] ib test on ring 5 succeeded [ 0.787805] [drm] Radeon Display Connectors [ 0.787806] [drm] Connector 0: [ 0.787807] [drm] DP-1 [ 0.787807] [drm] HPD5 [ 0.787808] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 0.787809] [drm] Encoders: [ 0.787810] [drm] DFP1: INTERNAL_UNIPHY2 [ 0.787810] [drm] Connector 1: [ 0.787811] [drm] DP-2 [ 0.787811] [drm] HPD4 [ 0.787812] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 0.787813] [drm] Encoders: [ 0.787813] [drm] DFP2: INTERNAL_UNIPHY2 [ 0.787814] [drm] Connector 2: [ 0.787814] [drm] HDMI-A-1 [ 0.787815] [drm] HPD6 [ 0.787816] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 0.787816] [drm] Encoders: [ 0.787817] [drm] DFP3: INTERNAL_UNIPHY1 [ 0.787817] [drm] Connector 3: [ 0.787818] [drm] DVI-D-1 [ 0.787819] [drm] HPD1 [ 0.787819] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 0.787820] [drm] Encoders: [ 0.787820] [drm] DFP4: INTERNAL_UNIPHY1 [ 0.787821] [drm] Connector 4: [ 0.787822] [drm] DVI-I-1 [ 0.787822] [drm] HPD3 [ 0.787823] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 0.787823] [drm] Encoders: [ 0.787824] [drm] DFP5: INTERNAL_UNIPHY [ 0.787825] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.788087] [drm] Internal thermal controller with fan control [ 0.789127] [drm] radeon: power management initialized [ 0.883380] [drm] fb mappable at 0xE137D000 [ 0.883381] [drm] vram apper at 0xE0000000 [ 0.883381] [drm] size 8294400 [ 0.883382] [drm] fb depth is 24 [ 0.883382] [drm] pitch is 7680 [ 0.883422] fbcon: radeondrmfb (fb0) is primary device [ 1.117966] Console: switching to colour frame buffer device 240x67 [ 1.122879] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 1.122881] radeon 0000:01:00.0: registered panic notifier [ 1.122883] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0 [ 1.123046] ahci 0000:00:1f.2: version 3.0 [ 1.123142] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.133747] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.133750] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.133753] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.144236] scsi0 : ahci [ 1.144299] scsi1 : ahci [ 1.144352] scsi2 : ahci [ 1.144405] scsi3 : ahci [ 1.144457] scsi4 : ahci [ 1.144511] scsi5 : ahci [ 1.144587] ata1: SATA max UDMA/133 abar m2048@0xf7f12000 port 0xf7f12100 irq 42 [ 1.144588] ata2: SATA max UDMA/133 abar m2048@0xf7f12000 port 0xf7f12180 irq 42 [ 1.144590] ata3: SATA max UDMA/133 abar m2048@0xf7f12000 port 0xf7f12200 irq 42 [ 1.144591] ata4: SATA max UDMA/133 abar m2048@0xf7f12000 port 0xf7f12280 irq 42 [ 1.144593] ata5: SATA max UDMA/133 abar m2048@0xf7f12000 port 0xf7f12300 irq 42 [ 1.144594] ata6: SATA max UDMA/133 abar m2048@0xf7f12000 port 0xf7f12380 irq 42 [ 1.144684] ahci 0000:03:00.0: irq 43 for MSI/MSI-X [ 1.144719] ahci: SSS flag set, parallel bus scan disabled [ 1.144756] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.144757] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 1.145002] scsi6 : ahci [ 1.145055] scsi7 : ahci [ 1.145105] ata7: SATA max UDMA/133 abar m512@0xf7d00000 port 0xf7d00100 irq 43 [ 1.145108] ata8: SATA max UDMA/133 abar m512@0xf7d00000 port 0xf7d00180 irq 43 [ 1.145256] tg3.c:v3.132 (May 21, 2013) [ 1.154657] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:43:92:27 [ 1.154659] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.154661] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.154662] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.154804] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.154805] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.155301] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.155396] mousedev: PS/2 mouse device common for all mice [ 1.155435] rtc_cmos 00:05: RTC can wake from S4 [ 1.155559] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.155585] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.155603] Intel P-state driver initializing. [ 1.155611] Intel pstate controlling: cpu 0 [ 1.155620] Intel pstate controlling: cpu 1 [ 1.155627] Intel pstate controlling: cpu 2 [ 1.155635] Intel pstate controlling: cpu 3 [ 1.155642] Intel pstate controlling: cpu 4 [ 1.155650] Intel pstate controlling: cpu 5 [ 1.155659] Intel pstate controlling: cpu 6 [ 1.155667] Intel pstate controlling: cpu 7 [ 1.155796] cpuidle: using governor ladder [ 1.155939] cpuidle: using governor menu [ 1.156053] TCP: cubic registered [ 1.156055] NET: Registered protocol family 17 [ 1.156352] TuxOnIce 3.3 (http://tuxonice.net) [ 1.185964] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.389577] tsc: Refined TSC clocksource calibration: 3400.023 MHz [ 1.389579] Switching to clocksource tsc [ 1.448544] ata2: SATA link down (SStatus 0 SControl 300) [ 1.448563] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.448577] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.448589] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.448600] ata5: SATA link down (SStatus 0 SControl 300) [ 1.448615] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.449021] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.449022] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.449023] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.449437] ata1.00: ATA-9: M4-CT256M4SSD2, 040H, max UDMA/100 [ 1.449439] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.449554] ata7: SATA link down (SStatus 0 SControl 300) [ 1.449965] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.449967] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.449968] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.450327] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.450329] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.450330] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.450375] ata1.00: configured for UDMA/100 [ 1.450432] scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 040H PQ: 0 ANSI: 5 [ 1.450550] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.450558] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.450559] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.450561] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.450591] sd 0:0:0:0: [sda] Write Protect is off [ 1.450592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.450610] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.451647] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > [ 1.451937] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.452111] ata3.00: HPA detected: current 1953523055, native 1953525168 [ 1.452152] ata6.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100 [ 1.452173] ata3.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133 [ 1.452174] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.453931] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.453933] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.453934] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.454523] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.454524] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.454525] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.455650] ata3.00: configured for UDMA/133 [ 1.455682] scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5 [ 1.455764] sd 2:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.455782] sd 2:0:0:0: [sdb] Write Protect is off [ 1.455783] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.455790] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.456120] ata6.00: configured for UDMA/100 [ 1.468657] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.468659] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.468660] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.470607] ata4.00: HPA detected: current 976771055, native 976773168 [ 1.470706] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 1.470707] ata4.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.472881] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.472882] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.472883] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.474938] ata4.00: configured for UDMA/133 [ 1.474976] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.475073] sd 3:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB) [ 1.475108] sd 3:0:0:0: [sdc] Write Protect is off [ 1.475110] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.475127] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.476239] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5 [ 1.497692] sdc: sdc1 sdc3 < sdc5 sdc6 > [ 1.497886] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.579009] sdb: sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > [ 1.579284] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.780376] ata8: SATA link down (SStatus 0 SControl 300) [ 1.780669] TuxOnIce: No image found. [ 1.788073] Restarting tasks ... done. [ 1.789754] PM: Checking hibernation image partition /dev/sda9 [ 1.789761] PM: Hibernation image partition 8:9 present [ 1.789762] PM: Looking for hibernation image. [ 1.790011] PM: Image not found (code -22) [ 1.790014] PM: Hibernation image not present or could not be loaded. [ 1.790760] console [netcon0] enabled [ 1.790760] netconsole: network logging started [ 1.790803] rtc_cmos 00:05: setting system clock to 2013-07-21 20:00:06 UTC (1374436806) [ 1.791095] Freeing unused kernel memory: 772k freed [ 1.791148] Write protecting the kernel read-only data: 10240k [ 1.793070] Freeing unused kernel memory: 1580k freed [ 1.795310] Freeing unused kernel memory: 2016k freed [ 1.795470] BFS CPU scheduler v0.440 by Con Kolivas. [ 1.867749] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 1.867750] EXT4-fs (sda6): write access will be enabled during recovery [ 2.167464] EXT4-fs (sda6): orphan cleanup on readonly fs [ 2.167468] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 48178 [ 2.167499] EXT4-fs (sda6): 1 orphan inode deleted [ 2.167500] EXT4-fs (sda6): recovery complete [ 2.183818] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 2.373263] systemd-udevd[1819]: starting version 197 [ 2.408746] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.408780] ACPI: Power Button [PWRB] [ 2.408815] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.408836] ACPI: Power Button [PWRF] [ 2.409939] ACPI: Requesting acpi_cpufreq [ 2.411292] ACPI: bus type USB registered [ 2.411322] usbcore: registered new interface driver usbfs [ 2.411338] usbcore: registered new interface driver hub [ 2.411472] usbcore: registered new device driver usb [ 2.412541] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.412592] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 2.412595] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.412601] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.412683] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.412702] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X [ 2.412914] xHCI xhci_add_endpoint called for root hub [ 2.412915] xHCI xhci_check_bandwidth called for root hub [ 2.412941] hub 1-0:1.0: USB hub found [ 2.412947] hub 1-0:1.0: 4 ports detected [ 2.413655] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.413659] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.413820] xHCI xhci_add_endpoint called for root hub [ 2.413821] xHCI xhci_check_bandwidth called for root hub [ 2.413908] hub 2-0:1.0: USB hub found [ 2.413914] hub 2-0:1.0: 4 ports detected [ 2.415022] ehci-pci: EHCI PCI platform driver [ 2.418088] Linux video capture interface: v2.00 [ 2.423132] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 2.423138] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 [ 2.423153] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 2.423779] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.423781] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.423878] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 2.423944] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 2.426797] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 2.427849] bttv: `0' invalid for parameter `adc_crush' [ 2.427885] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 2.428226] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 2.428558] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 2.428873] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28 [ 2.429215] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28 [ 2.429560] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28 [ 2.429805] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28 [ 2.430134] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.441302] gameport gameport0: EMU10K1 is pci0000:06:01.1/gameport0, io 0xc040, speed 448kHz [ 2.447936] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350] [ 2.485879] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [ 2.485883] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [ 2.485885] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [ 2.485888] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [ 2.485891] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [ 2.485893] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [ 2.485896] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [ 2.485899] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [ 2.486045] xHCI xhci_add_endpoint called for root hub [ 2.486046] xHCI xhci_check_bandwidth called for root hub [ 2.486060] hub 3-0:1.0: USB hub found [ 2.486066] hub 3-0:1.0: 2 ports detected [ 2.486117] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 2.486119] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4 [ 2.486123] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.486127] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5 [ 2.486143] ehci-pci 0000:00:1a.0: debug port 2 [ 2.486182] xHCI xhci_add_endpoint called for root hub [ 2.486183] xHCI xhci_check_bandwidth called for root hub [ 2.486198] hub 4-0:1.0: USB hub found [ 2.486203] hub 4-0:1.0: 2 ports detected [ 2.490048] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.490059] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f14000 [ 2.495950] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.496091] hub 5-0:1.0: USB hub found [ 2.496094] hub 5-0:1.0: 2 ports detected [ 2.496224] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 2.496228] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.496231] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.496241] ehci-pci 0000:00:1d.0: debug port 2 [ 2.500145] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.500159] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f13000 [ 2.505940] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.506100] hub 6-0:1.0: USB hub found [ 2.506102] hub 6-0:1.0: 2 ports detected [ 2.506267] ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251) [ 2.506271] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.797776] usb 5-1: new high-speed USB device number 2 using ehci-pci [ 2.912369] hub 5-1:1.0: USB hub found [ 2.912476] hub 5-1:1.0: 6 ports detected [ 3.014641] usb 6-1: new high-speed USB device number 2 using ehci-pci [ 3.129272] hub 6-1:1.0: USB hub found [ 3.129374] hub 6-1:1.0: 8 ports detected [ 3.203747] usb 5-1.4: new high-speed USB device number 3 using ehci-pci [ 3.301209] usb-storage 5-1.4:1.0: USB Mass Storage device detected [ 3.301231] scsi8 : usb-storage 5-1.4:1.0 [ 3.301276] usbcore: registered new interface driver usb-storage [ 3.404524] usb 6-1.5: new full-speed USB device number 3 using ehci-pci [ 3.505671] input: Genius 2.4G Wireless BlueEye Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.5/6-1.5:1.0/input/input3 [ 3.505724] hid-generic 0003:0458:00F6.0001: input: USB HID v1.11 Mouse [Genius 2.4G Wireless BlueEye Mouse] on usb-0000:00:1d.0-1.5/input0 [ 3.505732] usbcore: registered new interface driver usbhid [ 3.505732] usbhid: USB HID core driver [ 4.302876] scsi 8:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [ 4.305294] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 4.648764] loop: module loaded [ 4.662946] vboxdrv: Found 8 processor cores. [ 4.663057] vboxdrv: fAsync=0 offMin=0x1c3 offMax=0x2832 [ 4.663100] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 4.663101] vboxdrv: Successfully loaded version 4.2.16 (interface 0x001a0005). [ 11.916249] EXT4-fs (sda6): re-mounted. Opts: (null) [ 11.973728] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [ 11.987609] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 11.994909] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null) [ 12.046595] EXT4-fs (sdb11): mounted filesystem with ordered data mode. Opts: (null) [ 12.050146] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 12.108716] EXT4-fs (sdb10): mounted filesystem with ordered data mode. Opts: (null) [ 12.142129] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: (null) [ 12.197734] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 12.265617] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 12.319401] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null) [ 12.324705] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null) [ 13.563832] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.568851] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 13.573754] NET: Registered protocol family 10 [ 13.820384] tg3 0000:04:00.0: irq 54 for MSI/MSI-X [ 13.820387] tg3 0000:04:00.0: irq 55 for MSI/MSI-X [ 13.820390] tg3 0000:04:00.0: irq 56 for MSI/MSI-X [ 13.820392] tg3 0000:04:00.0: irq 57 for MSI/MSI-X [ 13.820394] tg3 0000:04:00.0: irq 58 for MSI/MSI-X [ 13.974904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.509332] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 15.509335] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 15.509337] tg3 0000:04:00.0 eth0: EEE is disabled [ 15.509347] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.834047] w83627ehf: Found NCT6776F chip at 0x290 [ 22.659556] input input3: event field not found [ 28.493465] ata1.00: configured for UDMA/100 [ 28.493467] ata1: EH complete [ 28.495436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.678579] ata3.00: configured for UDMA/133 [ 28.678581] ata3: EH complete [ 29.062426] ata4.00: configured for UDMA/133 [ 29.062428] ata4: EH complete [ 29.253229] EXT4-fs (sda6): re-mounted. Opts: commit=0 [ 29.261529] EXT4-fs (sda7): re-mounted. Opts: commit=0 [ 29.262482] EXT4-fs (sda10): re-mounted. Opts: commit=0 [ 29.263342] EXT4-fs (sdb11): re-mounted. Opts: commit=0 [ 29.264222] EXT4-fs (sda8): re-mounted. Opts: commit=0 [ 29.265114] EXT4-fs (sdb10): re-mounted. Opts: commit=0 [ 29.265991] EXT4-fs (sdb9): re-mounted. Opts: commit=0 [ 29.266881] EXT4-fs (sdb6): re-mounted. Opts: commit=0 [ 29.575975] EXT4-fs (sdb7): re-mounted. Opts: commit=0 [ 29.577059] EXT4-fs (sdb8): re-mounted. Opts: commit=0 [ 29.577959] EXT4-fs (sdc6): re-mounted. Opts: commit=0 [ 54.113175] ata1.00: configured for UDMA/100 [ 54.113180] ata1: EH complete [ 54.113288] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 54.236384] TuxOnIce 3.3, with support for usm, compression, block i/o, swap storage, userui. [ 54.240659] Initiating a hibernation cycle. [ 54.246410] Console is 67x240. [ 54.246449] Using configuration file /etc/splash/tuxonice/1920x1080.cfg. [ 54.246876] parse error @ line 22 [ 54.246882] parse error @ line 23 [ 54.281757] Framebuffer support initialised successfully. [ 54.285083] Starting other threads.Freezing user space processes ... (elapsed 0.01 seconds) done. [ 54.298982] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 54.389195] hpet1: lost 3 rtc interrupts [ 54.439015] Restarting kernel threads ... done. [ 54.575823] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 54.670391] hpet1: lost 3 rtc interrupts [ 55.467661] Waited for i/o due to synchronous I/O 4 times. [ 55.467664] Waited for i/o due to throughput_throttle 230 times. [ 55.467816] Suspending console(s) (use no_console_suspend to debug) [ 55.468203] serial 00:0b: disabled [ 55.468206] serial 00:0b: System wakeup disabled by ACPI [ 55.468215] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 55.753934] PM: freeze of devices complete after 286.281 msecs [ 55.754024] PM: late freeze of devices complete after 0.088 msecs [ 55.754758] PM: noirq freeze of devices complete after 0.734 msecs [ 55.755009] ACPI: Preparing to enter system sleep state S4 [ 56.154923] PM: Saving platform NVS memory [ 56.155258] Disabling non-boot CPUs ... [ 56.156487] smpboot: CPU 1 is now offline [ 56.157859] smpboot: CPU 2 is now offline [ 56.159206] smpboot: CPU 3 is now offline [ 56.160745] smpboot: CPU 4 is now offline [ 56.162078] smpboot: CPU 5 is now offline [ 56.163362] smpboot: CPU 6 is now offline [ 56.164668] smpboot: CPU 7 is now offline [ 56.288909] Pageset1 has grown by 51851 pages. extra_pages_allowance is currently only 35000. [ 54.755116] ...20%...40%...60%...80% [ 56.289881] However it looks like there's enough free ram and storage to handle this, so continuing anyway. [ 56.165764] Enabling non-boot CPUs ... [ 56.165786] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 56.179077] CPU1 is up [ 56.179088] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 56.192377] CPU2 is up [ 56.192387] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 56.205677] CPU3 is up [ 56.205689] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 56.218990] CPU4 is up [ 56.219001] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 56.232297] CPU5 is up [ 56.232307] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 56.245609] CPU6 is up [ 56.245620] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 56.258924] CPU7 is up [ 56.263190] ACPI: Waking up from system sleep state S4 [ 56.263665] PM: noirq thaw of devices complete after 0.070 msecs [ 56.263785] PM: early thaw of devices complete after 0.054 msecs [ 56.263909] pci 0000:05:00.0: setting latency timer to 64 [ 56.263965] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 56.264028] ahci 0000:00:1f.2: setting latency timer to 64 [ 56.264428] serial 00:0b: activated [ 56.265837] tg3 0000:04:00.0 eth0: Link is down [ 56.274944] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 56.287421] [drm] PCIE gen 2 link speeds already enabled [ 56.290854] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 56.291011] radeon 0000:01:00.0: WB enabled [ 56.291015] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 56.292602] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 56.292604] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 56.292606] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 56.292608] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 56.292610] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 56.311784] [drm] ring test on 0 succeeded in 0 usecs [ 56.311851] [drm] ring test on 3 succeeded in 0 usecs [ 56.311872] [drm] ring test on 4 succeeded in 1 usecs [ 56.487880] [drm] ring test on 5 succeeded in 1 usecs [ 56.487882] [drm] UVD initialized successfully. [ 56.489037] [drm] ib test on ring 0 succeeded in 0 usecs [ 56.489456] [drm] ib test on ring 3 succeeded in 0 usecs [ 56.489877] [drm] ib test on ring 4 succeeded in 0 usecs [ 56.568527] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 56.568555] ata8: SATA link down (SStatus 0 SControl 300) [ 56.568587] ata7: SATA link down (SStatus 0 SControl 300) [ 56.568974] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.568976] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.568977] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.569807] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.569808] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.569809] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.570151] ata1.00: configured for UDMA/100 [ 56.570527] ata2: SATA link down (SStatus 0 SControl 300) [ 56.572524] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 56.574523] ata5: SATA link down (SStatus 0 SControl 300) [ 56.574563] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.574565] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.574566] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.576526] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 56.578462] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.578463] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.578464] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.578560] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.578562] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.578563] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.579525] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 56.580177] ata6.00: configured for UDMA/100 [ 56.582583] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.582585] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.582586] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.584410] ata3.00: configured for UDMA/133 [ 56.600172] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.600173] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.600174] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.604315] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.604316] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.604316] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.606306] ata4.00: configured for UDMA/133 [ 56.642129] [drm] ib test on ring 5 succeeded [ 56.699913] PM: thaw of devices complete after 436.379 msecs [ 57.616588] Waited for i/o due to throughput_throttle 341 times. [ 57.973962] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 57.973964] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 57.973965] tg3 0000:04:00.0 eth0: EEE is disabled [ 58.144588] Waited for i/o due to readahead not ready 329 times. [ 58.144589] Waited for i/o due to synchronous I/O 1 times. [ 58.144701] Suspending console(s) (use no_console_suspend to debug) [ 58.145258] input input3: event field not found [ 58.145357] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 58.145364] sd 0:0:0:0: [sda] Stopping disk [ 58.145365] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 58.145446] sd 3:0:0:0: [sdc] Stopping disk [ 58.145474] sd 2:0:0:0: [sdb] Stopping disk [ 58.151996] serial 00:0b: disabled [ 58.152000] serial 00:0b: System wakeup disabled by ACPI [ 58.152008] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 58.872204] PM: suspend of devices complete after 727.858 msecs [ 58.872344] PM: late suspend of devices complete after 0.138 msecs [ 58.872513] pcieport 0000:00:1c.7: System wakeup enabled by ACPI [ 58.883481] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [ 58.894252] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 58.905343] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 58.916204] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 58.927173] PM: noirq suspend of devices complete after 54.859 msecs [ 58.927424] ACPI: Preparing to enter system sleep state S3 [ 59.327021] PM: Saving platform NVS memory [ 59.327360] Disabling non-boot CPUs ... [ 59.328597] smpboot: CPU 1 is now offline [ 59.329953] smpboot: CPU 2 is now offline [ 59.331304] smpboot: CPU 3 is now offline [ 59.332654] smpboot: CPU 4 is now offline [ 59.334146] smpboot: CPU 5 is now offline [ 59.335388] smpboot: CPU 6 is now offline [ 59.336665] smpboot: CPU 7 is now offline [ 59.337721] ACPI: Low-level resume complete [ 59.337754] PM: Restoring platform NVS memory [ 59.338173] Enabling non-boot CPUs ... [ 59.338210] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 59.351451] CPU1 is up [ 59.351469] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 59.364810] CPU2 is up [ 59.364827] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 59.378170] CPU3 is up [ 59.378186] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 59.391509] CPU4 is up [ 59.391522] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 59.404838] CPU5 is up [ 59.404851] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 59.418170] CPU6 is up [ 59.418182] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 59.431508] CPU7 is up [ 59.436990] ACPI: Waking up from system sleep state S3 [ 59.448279] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 59.459278] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 59.470269] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 59.547267] pcieport 0000:00:1c.7: System wakeup disabled by ACPI [ 59.547308] PM: noirq resume of devices complete after 109.885 msecs [ 59.547438] PM: early resume of devices complete after 0.065 msecs [ 59.547460] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 59.547476] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [ 59.547490] ahci 0000:00:1f.2: setting latency timer to 64 [ 59.547582] usb usb3: root hub lost power or was reset [ 59.547587] usb usb4: root hub lost power or was reset [ 59.547714] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 59.547923] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 59.547957] pci 0000:05:00.0: setting latency timer to 64 [ 59.547985] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 59.549736] tg3 0000:04:00.0 eth0: Link is down [ 59.576314] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 59.578764] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 59.578899] radeon 0000:01:00.0: WB enabled [ 59.578901] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 59.579495] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 59.579496] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 59.579497] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 59.579499] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 59.579500] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 59.598392] [drm] ring test on 0 succeeded in 0 usecs [ 59.598466] [drm] ring test on 3 succeeded in 0 usecs [ 59.598496] [drm] ring test on 4 succeeded in 1 usecs [ 59.610568] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [ 59.610575] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [ 59.610580] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [ 59.610590] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [ 59.610598] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [ 59.610603] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [ 59.610613] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [ 59.610621] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [ 59.704141] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 59.704553] serial 00:0b: activated [ 59.784569] [drm] ring test on 5 succeeded in 1 usecs [ 59.784571] [drm] UVD initialized successfully. [ 59.785987] [drm] ib test on ring 0 succeeded in 0 usecs [ 59.786436] [drm] ib test on ring 3 succeeded in 0 usecs [ 59.786882] [drm] ib test on ring 4 succeeded in 0 usecs [ 59.851990] ata2: SATA link down (SStatus 0 SControl 300) [ 59.855993] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 59.889088] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 59.889090] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 59.889091] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 59.938866] [drm] ib test on ring 5 succeeded [ 60.008931] ata8: SATA link down (SStatus 0 SControl 300) [ 60.009921] ata7: SATA link down (SStatus 0 SControl 300) [ 60.010914] ata5: SATA link down (SStatus 0 SControl 300) [ 60.012915] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 60.033742] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 60.033745] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 60.033748] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 60.106167] ata1.00: configured for UDMA/100 [ 60.131954] sd 0:0:0:0: [sda] Starting disk [ 60.131959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 60.141507] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 60.141510] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 60.141513] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 60.155676] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 60.155680] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 60.155682] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 60.157346] ata6.00: configured for UDMA/100 [ 61.279651] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 61.279653] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 61.279653] tg3 0000:04:00.0 eth0: EEE is disabled [ 64.900072] ata3: link is slow to respond, please be patient (ready=0) [ 65.054982] ata4: link is slow to respond, please be patient (ready=0) [ 67.348661] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 67.350845] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 67.350848] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 67.350851] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 67.355151] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 67.355155] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 67.355157] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 67.357178] ata4.00: configured for UDMA/133 [ 67.367680] sd 3:0:0:0: [sdc] Starting disk [ 69.589355] ata3: COMRESET failed (errno=-16) [ 71.423300] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 71.524319] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 71.524322] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 71.524325] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 71.641620] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 71.641624] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 71.641626] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 71.695357] ata3.00: configured for UDMA/133 [ 71.706164] sd 2:0:0:0: [sdb] Starting disk [ 71.756182] input input3: event field not found [ 71.756184] input input3: event field not found [ 71.756185] input input3: event field not found [ 71.756187] input input3: event field not found [ 71.756188] input input3: event field not found [ 71.756190] input input3: event field not found [ 71.756434] PM: resume of devices complete after 12216.069 msecs [ 56.755765] ...20%...40%...60%...80%...20%...40%...60%...80% [ 71.760732] Restarting tasks ... [ 71.762590] done. [ 71.790098] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.10.1+ - Compiler vers. : 4.7 - Attempt number : 1 - Parameters : 0 143368 0 1 4096 3 - Overall expected compression percentage: 40. - Compressor is 'lzo'. Compressed 1345351680 bytes into 424178868 (68 percent compression). - Block I/O active. Used 104977 pages from swap on /dev/sda9. - Max outstanding reads 41548. Max writes 14952. Memory_needed: 1024 x (4096 + 344 + 104) = 4653056 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2097151 pages. - I/O speed: Write 773 MB/s, Read 1464 MB/s. - Extra pages : 51851 used/35000. - Result : Succeeded. [ 71.809359] ata1.00: configured for UDMA/100 [ 71.809362] ata1: EH complete [ 72.805225] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [ 81.645382] tg3 0000:04:00.0 eth0: Link is down [ 279.171661] ata1.00: configured for UDMA/100 [ 279.171666] ata1: EH complete [ 279.171773] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 279.293061] TuxOnIce 3.3, with support for usm, compression, block i/o, swap storage, userui. [ 279.295466] Initiating a hibernation cycle. [ 279.297298] Console is 67x240. [ 279.297343] Using configuration file /etc/splash/tuxonice/1920x1080.cfg. [ 279.297373] parse error @ line 22 [ 279.297375] parse error @ line 23 [ 279.339969] Framebuffer support initialised successfully. [ 279.343462] Starting other threads.Freezing user space processes ... (elapsed 0.01 seconds) done. [ 279.360868] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 279.450670] hpet1: lost 3 rtc interrupts [ 279.502566] Restarting kernel threads ... done. [ 279.608280] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 279.645236] hpet1: lost 1 rtc interrupts [ 279.702162] hpet1: lost 2 rtc interrupts [ 280.437163] Waited for i/o due to synchronous I/O 2 times. [ 280.437166] Waited for i/o due to throughput_throttle 181 times. [ 280.437331] Suspending console(s) (use no_console_suspend to debug) [ 280.437701] serial 00:0b: disabled [ 280.437705] serial 00:0b: System wakeup disabled by ACPI [ 280.437723] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 280.888828] PM: freeze of devices complete after 451.756 msecs [ 280.888943] PM: late freeze of devices complete after 0.113 msecs [ 280.889676] PM: noirq freeze of devices complete after 0.732 msecs [ 280.889933] ACPI: Preparing to enter system sleep state S4 [ 281.289835] PM: Saving platform NVS memory [ 281.290187] Disabling non-boot CPUs ... [ 281.291420] smpboot: CPU 1 is now offline [ 281.292779] smpboot: CPU 2 is now offline [ 281.294131] smpboot: CPU 3 is now offline [ 281.295683] smpboot: CPU 4 is now offline [ 281.297000] smpboot: CPU 5 is now offline [ 281.298395] smpboot: CPU 6 is now offline [ 281.299685] smpboot: CPU 7 is now offline [ 281.300765] Enabling non-boot CPUs ... [ 281.300793] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 281.314084] CPU1 is up [ 281.314095] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 281.327286] CPU2 is up [ 281.327296] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 281.340598] CPU3 is up [ 281.340609] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 281.353911] CPU4 is up [ 281.353923] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 281.367221] CPU5 is up [ 281.367231] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 281.380539] CPU6 is up [ 281.380549] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 281.393856] CPU7 is up [ 281.398131] ACPI: Waking up from system sleep state S4 [ 281.398608] PM: noirq thaw of devices complete after 0.071 msecs [ 281.402817] hpet1: lost 5016 rtc interrupts [ 281.402931] PM: early thaw of devices complete after 0.053 msecs [ 281.403137] pci 0000:05:00.0: setting latency timer to 64 [ 281.403326] ahci 0000:00:1f.2: setting latency timer to 64 [ 281.403454] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 281.403948] serial 00:0b: activated [ 281.413708] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 281.427050] [drm] PCIE gen 2 link speeds already enabled [ 281.428957] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 281.429083] radeon 0000:01:00.0: WB enabled [ 281.429084] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 281.429678] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 281.429679] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 281.429680] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 281.429681] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 281.429682] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 281.448461] [drm] ring test on 0 succeeded in 0 usecs [ 281.448523] [drm] ring test on 3 succeeded in 0 usecs [ 281.448549] [drm] ring test on 4 succeeded in 1 usecs [ 281.624576] [drm] ring test on 5 succeeded in 1 usecs [ 281.624578] [drm] UVD initialized successfully. [ 281.625983] [drm] ib test on ring 0 succeeded in 0 usecs [ 281.626442] [drm] ib test on ring 3 succeeded in 0 usecs [ 281.626899] [drm] ib test on ring 4 succeeded in 0 usecs [ 281.707402] ata2: SATA link down (SStatus 0 SControl 300) [ 281.707404] ata8: SATA link down (SStatus 0 SControl 300) [ 281.709374] ata5: SATA link down (SStatus 0 SControl 300) [ 281.709395] ata7: SATA link down (SStatus 0 SControl 300) [ 281.711363] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 281.713366] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 281.713560] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 281.713563] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 281.713564] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 281.715356] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 281.717422] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 281.717424] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 281.717425] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 281.717668] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 281.717670] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 281.717672] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 281.718358] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 281.718765] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 281.718767] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 281.718768] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 281.719275] ata6.00: configured for UDMA/100 [ 281.719567] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 281.719569] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 281.719570] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 281.719906] ata1.00: configured for UDMA/100 [ 281.721624] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 281.721626] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 281.721628] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 281.723415] ata3.00: configured for UDMA/133 [ 281.734086] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 281.734087] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 281.734088] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 281.738385] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 281.738387] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 281.738388] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 281.740335] ata4.00: configured for UDMA/133 [ 281.778925] [drm] ib test on ring 5 succeeded [ 281.858229] PM: thaw of devices complete after 455.560 msecs [ 279.787057] ...20%...40%...60%...80% [ 281.917895] ...20% [ 282.798754] Waited for i/o due to throughput_throttle 28 times. [ 281.988583] ...40%...60%...80% [ 283.097999] ...20% [ 283.411345] Waited for i/o due to readahead not ready 5018 times. [ 283.411346] Waited for i/o due to synchronous I/O 1 times. [ 283.411346] Waited for i/o due to throughput_throttle 6213 times. [ 283.411451] Suspending console(s) (use no_console_suspend to debug) [ 283.412013] input input3: event field not found [ 283.412095] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 283.412102] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 283.412105] sd 0:0:0:0: [sda] Stopping disk [ 283.412154] sd 3:0:0:0: [sdc] Stopping disk [ 283.412219] sd 2:0:0:0: [sdb] Stopping disk [ 283.418787] serial 00:0b: disabled [ 283.418791] serial 00:0b: System wakeup disabled by ACPI [ 283.418803] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 284.144028] PM: suspend of devices complete after 732.935 msecs [ 284.144114] PM: late suspend of devices complete after 0.084 msecs [ 284.144288] pcieport 0000:00:1c.7: System wakeup enabled by ACPI [ 284.155261] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [ 284.166048] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 284.177143] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 284.187976] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 284.198960] PM: noirq suspend of devices complete after 54.875 msecs [ 284.199594] ACPI: Preparing to enter system sleep state S3 [ 284.598857] PM: Saving platform NVS memory [ 284.599219] Disabling non-boot CPUs ... [ 284.600457] smpboot: CPU 1 is now offline [ 284.601817] smpboot: CPU 2 is now offline [ 284.603172] smpboot: CPU 3 is now offline [ 284.604520] smpboot: CPU 4 is now offline [ 284.606014] smpboot: CPU 5 is now offline [ 284.607262] smpboot: CPU 6 is now offline [ 284.608556] smpboot: CPU 7 is now offline [ 284.609626] ACPI: Low-level resume complete [ 284.609660] PM: Restoring platform NVS memory [ 284.610094] Enabling non-boot CPUs ... [ 284.610124] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 284.623368] CPU1 is up [ 284.623386] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 284.636728] CPU2 is up [ 284.636745] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 284.650102] CPU3 is up [ 284.650117] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 284.663442] CPU4 is up [ 284.663455] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 284.676774] CPU5 is up [ 284.676787] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 284.690110] CPU6 is up [ 284.690122] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 284.703448] CPU7 is up [ 284.708942] ACPI: Waking up from system sleep state S3 [ 284.720025] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 284.731020] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 284.742014] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 284.819012] pcieport 0000:00:1c.7: System wakeup disabled by ACPI [ 284.819054] PM: noirq resume of devices complete after 109.682 msecs [ 284.819185] PM: early resume of devices complete after 0.066 msecs [ 284.819206] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 284.819225] ahci 0000:00:1f.2: setting latency timer to 64 [ 284.819230] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [ 284.819320] usb usb3: root hub lost power or was reset [ 284.819331] usb usb4: root hub lost power or was reset [ 284.819349] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 284.819450] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 284.819655] pci 0000:05:00.0: setting latency timer to 64 [ 284.819711] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 284.849409] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 284.852228] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 284.852389] radeon 0000:01:00.0: WB enabled [ 284.852392] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 284.852987] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 284.852989] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 284.852990] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 284.852992] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 284.852993] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 284.871970] [drm] ring test on 0 succeeded in 0 usecs [ 284.872040] [drm] ring test on 3 succeeded in 0 usecs [ 284.872075] [drm] ring test on 4 succeeded in 1 usecs [ 284.883140] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [ 284.883148] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [ 284.883152] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [ 284.883170] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [ 284.883177] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [ 284.883181] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [ 284.883185] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [ 284.883207] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [ 284.884095] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 284.885268] serial 00:0b: activated [ 285.125748] ata5: SATA link down (SStatus 0 SControl 300) [ 285.129751] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 285.131744] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 285.133752] ata2: SATA link down (SStatus 0 SControl 300) [ 285.133857] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 285.133859] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 285.133860] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 285.137891] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 285.137893] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 285.137894] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 285.139527] ata6.00: configured for UDMA/100 [ 285.160896] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 285.160897] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 285.160898] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 285.187732] ata7: SATA link down (SStatus 0 SControl 300) [ 285.187795] ata8: SATA link down (SStatus 0 SControl 300) [ 285.305548] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 285.305550] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 285.305551] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 285.377949] ata1.00: configured for UDMA/100 [ 285.403596] sd 0:0:0:0: [sda] Starting disk [ 285.403676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 286.047797] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 287.067335] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 288.086872] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 289.106408] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 290.125946] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 290.169808] ata3: link is slow to respond, please be patient (ready=0) [ 290.173801] ata4: link is slow to respond, please be patient (ready=0) [ 291.145484] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 292.059715] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 292.074457] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 292.074459] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 292.074461] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 292.078626] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 292.078627] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 292.078629] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 292.080627] ata4.00: configured for UDMA/133 [ 292.091706] sd 3:0:0:0: [sdc] Starting disk [ 292.165022] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 293.184559] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 294.204096] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 294.392298] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 294.392299] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 294.392300] tg3 0000:04:00.0 eth0: EEE is disabled [ 294.859091] ata3: COMRESET failed (errno=-16) [ 295.223632] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 295.243623] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 295.243626] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 295.245014] [drm] ib test on ring 0 succeeded in 0 usecs [ 295.245460] [drm] ib test on ring 3 succeeded in 0 usecs [ 295.245908] [drm] ib test on ring 4 succeeded in 0 usecs [ 297.559543] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 297.673009] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 297.673013] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 297.673015] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 297.843935] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 297.843938] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 297.843940] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 297.845675] ata3.00: configured for UDMA/133 [ 297.856393] sd 2:0:0:0: [sdb] Starting disk [ 297.904869] input input3: event field not found [ 297.904871] input input3: event field not found [ 297.904872] input input3: event field not found [ 297.904874] input input3: event field not found [ 297.904875] input input3: event field not found [ 297.904877] input input3: event field not found [ 297.905115] PM: resume of devices complete after 13093.512 msecs [ 283.172346] ...40%...60%...80% [ 297.909813] Restarting tasks ... [ 297.912324] done. [ 297.927912] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.10.1+ - Compiler vers. : 4.7 - Attempt number : 2 - Parameters : 0 143368 0 1 4096 3 - Overall expected compression percentage: 40. - Compressor is 'lzo'. Compressed 1356939264 bytes into 424844153 (68 percent compression). - Block I/O active. Used 105151 pages from swap on /dev/sda9. - Max outstanding reads 2177. Max writes 40524. Memory_needed: 1024 x (4096 + 344 + 104) = 4653056 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2097151 pages. - I/O speed: Write 797 MB/s, Read 1115 MB/s. - Extra pages : 20614 used/35000. - Result : Succeeded. [ 297.943282] ata1.00: configured for UDMA/100 [ 297.943285] ata1: EH complete [ 298.717101] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [ 971.172376] ata1.00: configured for UDMA/100 [ 971.172381] ata1: EH complete [ 971.172489] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 971.293543] TuxOnIce 3.3, with support for usm, compression, block i/o, swap storage, userui. [ 971.296457] Initiating a hibernation cycle. [ 971.298314] Console is 67x240. [ 971.298359] Using configuration file /etc/splash/tuxonice/1920x1080.cfg. [ 971.298388] parse error @ line 22 [ 971.298391] parse error @ line 23 [ 971.341266] Framebuffer support initialised successfully. [ 971.344984] Starting other threads.Freezing user space processes ... (elapsed 0.01 seconds) done. [ 971.360131] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 971.451232] hpet1: lost 3 rtc interrupts [ 971.503405] Restarting kernel threads ... done. [ 971.620147] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 971.718944] hpet1: lost 3 rtc interrupts [ 972.877343] Waited for i/o due to synchronous I/O 2 times. [ 972.877346] Waited for i/o due to throughput_throttle 467 times. [ 972.881052] Suspending console(s) (use no_console_suspend to debug) [ 972.881330] serial 00:0b: disabled [ 972.881340] serial 00:0b: System wakeup disabled by ACPI [ 972.881368] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 973.276131] PM: freeze of devices complete after 395.303 msecs [ 973.276233] PM: late freeze of devices complete after 0.101 msecs [ 973.276976] PM: noirq freeze of devices complete after 0.742 msecs [ 973.277236] ACPI: Preparing to enter system sleep state S4 [ 973.676869] PM: Saving platform NVS memory [ 973.677246] Disabling non-boot CPUs ... [ 973.678477] smpboot: CPU 1 is now offline [ 973.680030] smpboot: CPU 2 is now offline [ 973.681383] smpboot: CPU 3 is now offline [ 973.682731] smpboot: CPU 4 is now offline [ 973.684238] smpboot: CPU 5 is now offline [ 973.685501] smpboot: CPU 6 is now offline [ 973.686802] smpboot: CPU 7 is now offline [ 973.815962] Pageset1 has grown by 57968 pages. extra_pages_allowance is currently only 35000. [ 971.836224] ...20%...40%...60%...80% [ 973.817047] However it looks like there's enough free ram and storage to handle this, so continuing anyway. [ 973.687890] Enabling non-boot CPUs ... [ 973.687917] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 973.701208] CPU1 is up [ 973.701218] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 973.714508] CPU2 is up [ 973.714520] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 973.727814] CPU3 is up [ 973.727825] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 973.741126] CPU4 is up [ 973.741137] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 973.754435] CPU5 is up [ 973.754446] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 973.767746] CPU6 is up [ 973.767756] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 973.781060] CPU7 is up [ 973.785341] ACPI: Waking up from system sleep state S4 [ 973.785818] PM: noirq thaw of devices complete after 0.071 msecs [ 973.785936] PM: early thaw of devices complete after 0.054 msecs [ 973.786049] pci 0000:05:00.0: setting latency timer to 64 [ 973.786197] ahci 0000:00:1f.2: setting latency timer to 64 [ 973.786582] serial 00:0b: activated [ 973.787986] tg3 0000:04:00.0 eth0: Link is down [ 973.796716] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 973.809456] [drm] PCIE gen 2 link speeds already enabled [ 973.811491] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 973.811637] radeon 0000:01:00.0: WB enabled [ 973.811639] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 973.812232] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 973.812233] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 973.812234] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 973.812235] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 973.812236] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 973.831090] [drm] ring test on 0 succeeded in 0 usecs [ 973.831158] [drm] ring test on 3 succeeded in 0 usecs [ 973.831221] [drm] ring test on 4 succeeded in 1 usecs [ 974.090414] ata7: SATA link down (SStatus 0 SControl 300) [ 974.090447] ata8: SATA link down (SStatus 0 SControl 300) [ 974.091395] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 974.093402] ata5: SATA link down (SStatus 0 SControl 300) [ 974.095393] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 974.097135] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 974.097136] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 974.097137] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 974.098391] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 974.099390] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 974.099832] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 974.099833] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 974.099834] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 974.100387] ata2: SATA link down (SStatus 0 SControl 300) [ 974.100442] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 974.100444] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 974.100445] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 974.100722] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 974.100723] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 974.100724] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 974.101154] ata1.00: configured for UDMA/100 [ 974.101183] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 974.101185] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 974.101186] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 974.103386] ata3.00: configured for UDMA/133 [ 974.104406] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 974.104407] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 974.104409] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 974.106031] ata6.00: configured for UDMA/100 [ 974.112034] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 974.112036] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 974.112037] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 974.116126] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 974.116127] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 974.116128] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 974.118123] ata4.00: configured for UDMA/133 [ 975.006842] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 975.555055] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 975.555056] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 975.555057] tg3 0000:04:00.0 eth0: EEE is disabled [ 976.026382] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 977.045920] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 978.065458] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 979.084995] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 980.104533] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 981.124070] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 982.143608] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 983.163146] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 984.182684] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 984.202675] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 984.202678] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 984.204070] [drm] ib test on ring 0 succeeded in 0 usecs [ 984.204490] [drm] ib test on ring 3 succeeded in 0 usecs [ 984.204912] [drm] ib test on ring 4 succeeded in 0 usecs [ 984.264057] PM: thaw of devices complete after 10484.191 msecs [ 985.527795] Waited for i/o due to throughput_throttle 1292 times. [ 984.321810] ...20%...40%...60%...80% [ 986.500750] ...20% [ 987.128874] Waited for i/o due to readahead not ready 12671 times. [ 987.128875] Waited for i/o due to synchronous I/O 1 times. [ 987.128875] Waited for i/o due to throughput_throttle 14632 times. [ 987.128981] Suspending console(s) (use no_console_suspend to debug) [ 987.129563] input input3: event field not found [ 987.129648] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 987.129653] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 987.129658] sd 0:0:0:0: [sda] Stopping disk [ 987.129711] sd 3:0:0:0: [sdc] Stopping disk [ 987.129908] sd 2:0:0:0: [sdb] Stopping disk [ 987.136334] serial 00:0b: disabled [ 987.136337] serial 00:0b: System wakeup disabled by ACPI [ 987.136346] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 987.842440] PM: suspend of devices complete after 713.787 msecs [ 987.842588] PM: late suspend of devices complete after 0.145 msecs [ 987.842739] pcieport 0000:00:1c.7: System wakeup enabled by ACPI [ 987.853741] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [ 987.897441] PM: noirq suspend of devices complete after 54.883 msecs [ 987.898091] ACPI: Preparing to enter system sleep state S3 [ 988.297335] PM: Saving platform NVS memory [ 988.297652] Disabling non-boot CPUs ... [ 988.298915] smpboot: CPU 1 is now offline [ 988.300272] smpboot: CPU 2 is now offline [ 988.301625] smpboot: CPU 3 is now offline [ 988.303169] smpboot: CPU 4 is now offline [ 988.304464] smpboot: CPU 5 is now offline [ 988.305710] smpboot: CPU 6 is now offline [ 988.307014] smpboot: CPU 7 is now offline [ 988.308064] ACPI: Low-level resume complete [ 988.308098] PM: Restoring platform NVS memory [ 988.308535] Enabling non-boot CPUs ... [ 988.308564] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 988.321810] CPU1 is up [ 988.321826] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 988.335168] CPU2 is up [ 988.335184] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 988.348542] CPU3 is up [ 988.348558] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 988.361881] CPU4 is up [ 988.361894] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 988.375213] CPU5 is up [ 988.375225] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 988.388558] CPU6 is up [ 988.388571] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 988.401900] CPU7 is up [ 988.407391] ACPI: Waking up from system sleep state S3 [ 988.517499] pcieport 0000:00:1c.7: System wakeup disabled by ACPI [ 988.517540] PM: noirq resume of devices complete after 109.717 msecs [ 988.517671] PM: early resume of devices complete after 0.065 msecs [ 988.517693] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 988.517710] ahci 0000:00:1f.2: setting latency timer to 64 [ 988.517721] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [ 988.517810] usb usb3: root hub lost power or was reset [ 988.517812] usb usb4: root hub lost power or was reset [ 988.517942] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 988.518054] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 988.518208] pci 0000:05:00.0: setting latency timer to 64 [ 988.518221] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 988.519179] serial 00:0b: activated [ 988.519974] tg3 0000:04:00.0 eth0: Link is down [ 988.546725] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 988.549186] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 988.549309] radeon 0000:01:00.0: WB enabled [ 988.549311] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 988.549938] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 988.549940] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 988.549941] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 988.549942] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 988.549943] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 988.568850] [drm] ring test on 0 succeeded in 0 usecs [ 988.568927] [drm] ring test on 3 succeeded in 0 usecs [ 988.568956] [drm] ring test on 4 succeeded in 1 usecs [ 988.580738] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [ 988.580743] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [ 988.580748] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [ 988.580752] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [ 988.580756] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [ 988.580760] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [ 988.580764] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [ 988.580769] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [ 988.822236] ata8: SATA link down (SStatus 0 SControl 300) [ 988.823247] ata7: SATA link down (SStatus 0 SControl 300) [ 988.887197] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 988.889196] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 988.891184] ata5: SATA link down (SStatus 0 SControl 300) [ 988.895182] ata2: SATA link down (SStatus 0 SControl 300) [ 988.918222] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 988.918223] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 988.918225] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 989.062966] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 989.062968] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 989.062969] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 989.102520] ata1.00: configured for UDMA/100 [ 989.105794] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 989.105796] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 989.105797] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 989.113103] sd 0:0:0:0: [sda] Starting disk [ 989.113122] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 989.119945] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 989.119947] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 989.119948] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 989.121575] ata6.00: configured for UDMA/100 [ 989.744615] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 990.267392] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 990.267393] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 990.267394] tg3 0000:04:00.0 eth0: EEE is disabled [ 990.768189] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 991.787745] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 992.807301] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 993.826857] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 993.931256] ata3: link is slow to respond, please be patient (ready=0) [ 993.939251] ata4: link is slow to respond, please be patient (ready=0) [ 994.846433] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 995.865989] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 996.385841] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 996.387932] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 996.387934] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 996.387935] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 996.391951] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 996.391952] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 996.391954] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 996.393858] ata4.00: configured for UDMA/133 [ 996.404870] sd 3:0:0:0: [sdc] Starting disk [ 996.885548] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 997.905101] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 998.620538] ata3: COMRESET failed (errno=-16) [ 998.924678] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 998.944669] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 998.944672] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 998.946123] [drm] ib test on ring 0 succeeded in 0 usecs [ 998.946571] [drm] ib test on ring 3 succeeded in 0 usecs [ 998.947017] [drm] ib test on ring 4 succeeded in 0 usecs [ 1000.607405] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1000.735723] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1000.735726] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1000.735729] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1000.853042] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1000.853045] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1000.853047] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1000.908369] ata3.00: configured for UDMA/133 [ 1000.919319] sd 2:0:0:0: [sdb] Starting disk [ 1000.967582] input input3: event field not found [ 1000.967584] input input3: event field not found [ 1000.967585] input input3: event field not found [ 1000.967587] input input3: event field not found [ 1000.967588] input input3: event field not found [ 1000.967590] input input3: event field not found [ 1000.967838] PM: resume of devices complete after 12457.380 msecs [ 986.715491] ...40%...60%...80% [ 1000.971553] Restarting tasks ... [ 1000.974058] done. [ 1000.993599] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.10.1+ - Compiler vers. : 4.7 - Attempt number : 3 - Parameters : 0 143368 0 1 4096 3 - Overall expected compression percentage: 40. - Compressor is 'lzo'. Compressed 1848385536 bytes into 551480102 (70 percent compression). - Block I/O active. Used 136536 pages from swap on /dev/sda9. - Max outstanding reads 593. Max writes 12207. Memory_needed: 1024 x (4096 + 344 + 104) = 4653056 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2097151 pages. - I/O speed: Write 744 MB/s, Read 796 MB/s. - Extra pages : 57968 used/35000. - Result : Succeeded. [ 1001.011654] ata1.00: configured for UDMA/100 [ 1001.011656] ata1: EH complete [ 1001.947730] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [ 1034.245353] ata1.00: configured for UDMA/100 [ 1034.245358] ata1: EH complete [ 1034.245468] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1034.378001] TuxOnIce 3.3, with support for usm, compression, block i/o, swap storage, userui. [ 1034.382032] Initiating a hibernation cycle. [ 1034.384154] Console is 67x240. [ 1034.384196] Using configuration file /etc/splash/tuxonice/1920x1080.cfg. [ 1034.384225] parse error @ line 22 [ 1034.384227] parse error @ line 23 [ 1034.417770] Framebuffer support initialised successfully. [ 1034.421146] Starting other threads.Freezing user space processes ... (elapsed 0.01 seconds) done. [ 1034.433879] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1034.467436] hpet1: lost 1 rtc interrupts [ 1034.525332] hpet1: lost 2 rtc interrupts [ 1034.579818] Restarting kernel threads ... done. [ 1034.710907] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1034.810314] hpet1: lost 3 rtc interrupts [ 1035.993917] Waited for i/o due to synchronous I/O 2 times. [ 1035.993920] Waited for i/o due to throughput_throttle 508 times. [ 1035.995976] Suspending console(s) (use no_console_suspend to debug) [ 1035.996289] serial 00:0b: disabled [ 1035.996292] serial 00:0b: System wakeup disabled by ACPI [ 1035.996304] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 1036.218967] PM: freeze of devices complete after 223.116 msecs [ 1036.219072] PM: late freeze of devices complete after 0.103 msecs [ 1036.219814] PM: noirq freeze of devices complete after 0.742 msecs [ 1036.220069] ACPI: Preparing to enter system sleep state S4 [ 1036.619690] PM: Saving platform NVS memory [ 1036.620027] Disabling non-boot CPUs ... [ 1036.621288] smpboot: CPU 1 is now offline [ 1036.622846] smpboot: CPU 2 is now offline [ 1036.624204] smpboot: CPU 3 is now offline [ 1036.625555] smpboot: CPU 4 is now offline [ 1036.627072] smpboot: CPU 5 is now offline [ 1036.628469] smpboot: CPU 6 is now offline [ 1036.629762] smpboot: CPU 7 is now offline [ 1036.630839] Enabling non-boot CPUs ... [ 1036.630867] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1036.644160] CPU1 is up [ 1036.644171] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1036.657473] CPU2 is up [ 1036.657483] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1036.670776] CPU3 is up [ 1036.670787] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 1036.684089] CPU4 is up [ 1036.684099] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 1036.697405] CPU5 is up [ 1036.697415] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 1036.710715] CPU6 is up [ 1036.710726] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 1036.724034] CPU7 is up [ 1036.728316] ACPI: Waking up from system sleep state S4 [ 1036.728795] PM: noirq thaw of devices complete after 0.071 msecs [ 1036.728913] PM: early thaw of devices complete after 0.055 msecs [ 1036.729048] pci 0000:05:00.0: setting latency timer to 64 [ 1036.729196] ahci 0000:00:1f.2: setting latency timer to 64 [ 1036.729641] serial 00:0b: activated [ 1036.730961] tg3 0000:04:00.0 eth0: Link is down [ 1036.752589] [drm] PCIE gen 2 link speeds already enabled [ 1036.754621] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 1036.754732] radeon 0000:01:00.0: WB enabled [ 1036.754734] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 1036.755326] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 1036.755327] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 1036.755329] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 1036.755330] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 1036.755331] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 1036.774275] [drm] ring test on 0 succeeded in 0 usecs [ 1036.774477] [drm] ring test on 3 succeeded in 0 usecs [ 1036.774570] [drm] ring test on 4 succeeded in 1 usecs [ 1036.885161] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 1037.033241] ata7: SATA link down (SStatus 0 SControl 300) [ 1037.033279] ata8: SATA link down (SStatus 0 SControl 300) [ 1037.033279] ata2: SATA link down (SStatus 0 SControl 300) [ 1037.035212] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1037.037207] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1037.037209] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1037.037210] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1037.037225] ata5: SATA link down (SStatus 0 SControl 300) [ 1037.039210] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1037.040937] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1037.040939] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1037.040940] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1037.041206] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1037.041253] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1037.041254] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1037.041255] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1037.042879] ata6.00: configured for UDMA/100 [ 1037.043205] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1037.043227] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1037.043228] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1037.043230] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1037.043575] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1037.043577] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1037.043577] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1037.044340] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1037.044341] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1037.044342] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1037.044668] ata1.00: configured for UDMA/100 [ 1037.045060] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1037.045061] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1037.045062] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1037.047153] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1037.047153] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1037.047154] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1037.047292] ata3.00: configured for UDMA/133 [ 1037.049052] ata4.00: configured for UDMA/133 [ 1037.950206] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1038.419412] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 1038.419413] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 1038.419414] tg3 0000:04:00.0 eth0: EEE is disabled [ 1038.974180] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1039.993719] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1041.013258] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1042.032797] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1043.052338] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1044.071877] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1045.091416] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1046.110957] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1047.130494] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1047.150485] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 1047.150488] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 1047.151644] [drm] ib test on ring 0 succeeded in 0 usecs [ 1047.152064] [drm] ib test on ring 3 succeeded in 0 usecs [ 1047.152484] [drm] ib test on ring 4 succeeded in 0 usecs [ 1047.226934] PM: thaw of devices complete after 10504.103 msecs [ 1035.050415] ...20%...40%...60%...80% [ 1047.283983] ...20% [ 1048.211266] Waited for i/o due to throughput_throttle 273 times. [ 1047.345305] ...40%...60%...80% [ 1049.186137] ...20% [ 1049.802745] Waited for i/o due to readahead not ready 7176 times. [ 1049.802746] Waited for i/o due to synchronous I/O 1 times. [ 1049.802747] Waited for i/o due to throughput_throttle 9663 times. [ 1049.802855] Suspending console(s) (use no_console_suspend to debug) [ 1049.803418] input input3: event field not found [ 1049.803509] sd 0:0:0:0: [sda] Stopping disk [ 1049.803510] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 1049.803512] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 1049.803595] sd 3:0:0:0: [sdc] Stopping disk [ 1049.803624] sd 2:0:0:0: [sdb] Stopping disk [ 1049.810236] serial 00:0b: disabled [ 1049.810239] serial 00:0b: System wakeup disabled by ACPI [ 1049.810251] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 1050.536484] PM: suspend of devices complete after 733.988 msecs [ 1050.536569] PM: late suspend of devices complete after 0.083 msecs [ 1050.536744] pcieport 0000:00:1c.7: System wakeup enabled by ACPI [ 1050.547709] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [ 1050.591406] PM: noirq suspend of devices complete after 54.866 msecs [ 1050.592052] ACPI: Preparing to enter system sleep state S3 [ 1050.991300] PM: Saving platform NVS memory [ 1050.991638] Disabling non-boot CPUs ... [ 1050.992904] smpboot: CPU 1 is now offline [ 1050.994263] smpboot: CPU 2 is now offline [ 1050.995621] smpboot: CPU 3 is now offline [ 1050.997167] smpboot: CPU 4 is now offline [ 1050.998475] smpboot: CPU 5 is now offline [ 1050.999721] smpboot: CPU 6 is now offline [ 1051.001018] smpboot: CPU 7 is now offline [ 1051.002080] ACPI: Low-level resume complete [ 1051.002115] PM: Restoring platform NVS memory [ 1051.002532] Enabling non-boot CPUs ... [ 1051.002568] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1051.015814] CPU1 is up [ 1051.015830] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1051.029174] CPU2 is up [ 1051.029189] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1051.042547] CPU3 is up [ 1051.042563] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 1051.055891] CPU4 is up [ 1051.055903] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 1051.069222] CPU5 is up [ 1051.069234] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 1051.082557] CPU6 is up [ 1051.082570] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 1051.095896] CPU7 is up [ 1051.101376] ACPI: Waking up from system sleep state S3 [ 1051.211463] pcieport 0000:00:1c.7: System wakeup disabled by ACPI [ 1051.211505] PM: noirq resume of devices complete after 109.696 msecs [ 1051.211637] PM: early resume of devices complete after 0.067 msecs [ 1051.211658] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1051.211678] ahci 0000:00:1f.2: setting latency timer to 64 [ 1051.211688] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [ 1051.211829] usb usb3: root hub lost power or was reset [ 1051.211830] usb usb4: root hub lost power or was reset [ 1051.211889] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1051.212097] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1051.212148] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 1051.212150] pci 0000:05:00.0: setting latency timer to 64 [ 1051.213929] tg3 0000:04:00.0 eth0: Link is down [ 1051.240533] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 1051.242991] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 1051.243131] radeon 0000:01:00.0: WB enabled [ 1051.243133] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 1051.243728] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 1051.243729] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 1051.243731] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 1051.243732] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 1051.243733] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 1051.262626] [drm] ring test on 0 succeeded in 0 usecs [ 1051.262701] [drm] ring test on 3 succeeded in 0 usecs [ 1051.262730] [drm] ring test on 4 succeeded in 1 usecs [ 1051.274912] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [ 1051.274927] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [ 1051.274931] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [ 1051.274936] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [ 1051.274950] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [ 1051.274954] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [ 1051.274959] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [ 1051.274969] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [ 1051.276616] serial 00:0b: activated [ 1051.516187] ata2: SATA link down (SStatus 0 SControl 300) [ 1051.518189] ata5: SATA link down (SStatus 0 SControl 300) [ 1051.522182] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1051.524186] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1051.526293] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1051.526295] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1051.526296] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1051.530475] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1051.530476] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1051.530477] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1051.532100] ata6.00: configured for UDMA/100 [ 1051.554243] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1051.554245] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1051.554247] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1051.580160] ata7: SATA link down (SStatus 0 SControl 300) [ 1051.580194] ata8: SATA link down (SStatus 0 SControl 300) [ 1051.698888] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1051.698890] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1051.698891] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1051.771298] ata1.00: configured for UDMA/100 [ 1051.797070] sd 0:0:0:0: [sda] Starting disk [ 1051.797103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1052.438364] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1052.902407] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 1052.902408] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 1052.902409] tg3 0000:04:00.0 eth0: EEE is disabled [ 1053.457904] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1054.477443] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1055.496983] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1056.516522] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1056.566255] ata4: link is slow to respond, please be patient (ready=0) [ 1056.572251] ata3: link is slow to respond, please be patient (ready=0) [ 1057.536061] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1058.452169] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1058.472833] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1058.472835] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1058.472836] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1058.477038] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1058.477040] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1058.477041] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1058.479035] ata4.00: configured for UDMA/133 [ 1058.489156] sd 3:0:0:0: [sdc] Starting disk [ 1058.555599] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1059.575137] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1060.594676] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1061.261534] ata3: COMRESET failed (errno=-16) [ 1061.614214] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1061.634206] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 1061.634209] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 1061.635623] [drm] ib test on ring 0 succeeded in 0 usecs [ 1061.636071] [drm] ib test on ring 3 succeeded in 0 usecs [ 1061.636519] [drm] ib test on ring 4 succeeded in 0 usecs [ 1063.961987] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1064.076310] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1064.076313] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1064.076315] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1064.193572] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1064.193575] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1064.193578] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1064.248881] ata3.00: configured for UDMA/133 [ 1064.259839] sd 2:0:0:0: [sdb] Starting disk [ 1064.308178] input input3: event field not found [ 1064.308190] input input3: event field not found [ 1064.308191] input input3: event field not found [ 1064.308201] input input3: event field not found [ 1064.308202] input input3: event field not found [ 1064.308202] input input3: event field not found [ 1064.308431] PM: resume of devices complete after 13104.383 msecs [ 1049.396640] ...40%...60%...80% [ 1064.312707] Restarting tasks ... [ 1064.314753] done. [ 1064.345688] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.10.1+ - Compiler vers. : 4.7 - Attempt number : 4 - Parameters : 0 143368 0 1 4096 3 - Overall expected compression percentage: 40. - Compressor is 'lzo'. Compressed 1854820352 bytes into 552163395 (70 percent compression). - Block I/O active. Used 136709 pages from swap on /dev/sda9. - Max outstanding reads 482. Max writes 28499. Memory_needed: 1024 x (4096 + 344 + 104) = 4653056 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2097151 pages. - I/O speed: Write 839 MB/s, Read 805 MB/s. - Extra pages : 23118 used/35000. - Result : Succeeded. [ 1064.362232] ata1.00: configured for UDMA/100 [ 1064.362235] ata1: EH complete [ 1065.294074] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [ 1418.761763] ata1.00: configured for UDMA/100 [ 1418.761766] ata1: EH complete [ 1418.761822] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1418.888914] TuxOnIce 3.3, with support for usm, compression, block i/o, swap storage, userui. [ 1418.891592] Initiating a hibernation cycle. [ 1418.893419] Console is 67x240. [ 1418.893464] Using configuration file /etc/splash/tuxonice/1920x1080.cfg. [ 1418.893493] parse error @ line 22 [ 1418.893496] parse error @ line 23 [ 1418.936704] Framebuffer support initialised successfully. [ 1418.940479] Starting other threads.Freezing user space processes ... (elapsed 0.01 seconds) done. [ 1418.957338] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1419.049495] hpet1: lost 2 rtc interrupts [ 1419.106811] Restarting kernel threads ... done. [ 1419.275059] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1419.377660] hpet1: lost 2 rtc interrupts [ 1420.919282] Waited for i/o due to synchronous I/O 2 times. [ 1420.919285] Waited for i/o due to throughput_throttle 270 times. [ 1420.919446] Suspending console(s) (use no_console_suspend to debug) [ 1420.919738] serial 00:0b: disabled [ 1420.919741] serial 00:0b: System wakeup disabled by ACPI [ 1420.919753] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 1421.232142] PM: freeze of devices complete after 312.873 msecs [ 1421.232242] PM: late freeze of devices complete after 0.099 msecs [ 1421.232978] PM: noirq freeze of devices complete after 0.735 msecs [ 1421.233232] ACPI: Preparing to enter system sleep state S4 [ 1421.632865] PM: Saving platform NVS memory [ 1421.633238] Disabling non-boot CPUs ... [ 1421.634470] smpboot: CPU 1 is now offline [ 1421.635821] smpboot: CPU 2 is now offline [ 1421.637173] smpboot: CPU 3 is now offline [ 1421.638518] smpboot: CPU 4 is now offline [ 1421.640026] smpboot: CPU 5 is now offline [ 1421.641299] smpboot: CPU 6 is now offline [ 1421.642603] smpboot: CPU 7 is now offline [ 1421.775702] Pageset1 has grown by 35918 pages. extra_pages_allowance is currently only 35000. [ 1419.519112] ...20%...40%...60%...80% [ 1421.776381] However it looks like there's enough free ram and storage to handle this, so continuing anyway. [ 1421.643699] Enabling non-boot CPUs ... [ 1421.643727] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1421.657018] CPU1 is up [ 1421.657029] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1421.670320] CPU2 is up [ 1421.670331] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1421.683636] CPU3 is up [ 1421.683646] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 1421.696949] CPU4 is up [ 1421.696960] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 1421.710259] CPU5 is up [ 1421.710269] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 1421.723576] CPU6 is up [ 1421.723585] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 1421.736891] CPU7 is up [ 1421.741185] ACPI: Waking up from system sleep state S4 [ 1421.741663] PM: noirq thaw of devices complete after 0.071 msecs [ 1421.741780] PM: early thaw of devices complete after 0.054 msecs [ 1421.741894] pci 0000:05:00.0: setting latency timer to 64 [ 1421.741955] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 1421.742035] ahci 0000:00:1f.2: setting latency timer to 64 [ 1421.742391] serial 00:0b: activated [ 1421.743824] tg3 0000:04:00.0 eth0: Link is down [ 1421.752764] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 1421.766411] [drm] PCIE gen 2 link speeds already enabled [ 1421.769636] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 1421.769857] radeon 0000:01:00.0: WB enabled [ 1421.769861] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 1421.771216] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 1421.771218] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 1421.771220] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 1421.771224] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 1421.771229] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 1421.790407] [drm] ring test on 0 succeeded in 0 usecs [ 1421.790477] [drm] ring test on 3 succeeded in 0 usecs [ 1421.790496] [drm] ring test on 4 succeeded in 1 usecs [ 1422.046396] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1422.046403] ata8: SATA link down (SStatus 0 SControl 300) [ 1422.046437] ata7: SATA link down (SStatus 0 SControl 300) [ 1422.048393] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1422.048847] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1422.048849] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1422.048850] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1422.049608] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1422.049610] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1422.049611] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1422.049931] ata1.00: configured for UDMA/100 [ 1422.050390] ata5: SATA link down (SStatus 0 SControl 300) [ 1422.052376] ata2: SATA link down (SStatus 0 SControl 300) [ 1422.054379] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1422.056380] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1422.056401] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1422.056402] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1422.056403] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1422.058244] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1422.058246] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1422.058247] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1422.060316] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1422.060317] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1422.060318] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1422.061887] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1422.061889] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1422.061890] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1422.061946] ata6.00: configured for UDMA/100 [ 1422.064278] ata3.00: configured for UDMA/133 [ 1422.067084] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1422.067086] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1422.067088] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1422.071251] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1422.071253] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1422.071254] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1422.073190] ata4.00: configured for UDMA/133 [ 1422.966049] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1423.451936] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 1423.451937] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 1423.451937] tg3 0000:04:00.0 eth0: EEE is disabled [ 1423.985588] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1425.005128] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1426.024666] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1427.044204] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1428.063742] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1429.083280] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1430.102819] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1431.122358] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1432.141896] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1432.161888] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 1432.161890] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 1432.163252] [drm] ib test on ring 0 succeeded in 0 usecs [ 1432.163674] [drm] ib test on ring 3 succeeded in 0 usecs [ 1432.164095] [drm] ib test on ring 4 succeeded in 0 usecs [ 1432.223228] PM: thaw of devices complete after 10487.520 msecs [ 1433.428366] Waited for i/o due to throughput_throttle 368 times. [ 1432.301060] ...20%...40%...60%...80% [ 1434.374532] ...20% [ 1435.148862] Waited for i/o due to readahead not ready 13731 times. [ 1435.148863] Waited for i/o due to synchronous I/O 1 times. [ 1435.148864] Waited for i/o due to throughput_throttle 15164 times. [ 1435.148980] Suspending console(s) (use no_console_suspend to debug) [ 1435.149550] input input3: event field not found [ 1435.149646] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 1435.149650] sd 0:0:0:0: [sda] Stopping disk [ 1435.149653] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 1435.149764] sd 2:0:0:0: [sdb] Stopping disk [ 1435.150009] sd 3:0:0:0: [sdc] Stopping disk [ 1435.156358] serial 00:0b: disabled [ 1435.156361] serial 00:0b: System wakeup disabled by ACPI [ 1435.156373] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 1435.875465] PM: suspend of devices complete after 726.834 msecs [ 1435.875547] PM: late suspend of devices complete after 0.080 msecs [ 1435.875721] pcieport 0000:00:1c.7: System wakeup enabled by ACPI [ 1435.886689] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [ 1435.897477] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 1435.908571] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 1435.919404] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1435.930388] PM: noirq suspend of devices complete after 54.870 msecs [ 1435.931022] ACPI: Preparing to enter system sleep state S3 [ 1436.330285] PM: Saving platform NVS memory [ 1436.330659] Disabling non-boot CPUs ... [ 1436.331900] smpboot: CPU 1 is now offline [ 1436.333385] smpboot: CPU 2 is now offline [ 1436.334741] smpboot: CPU 3 is now offline [ 1436.336096] smpboot: CPU 4 is now offline [ 1436.337596] smpboot: CPU 5 is now offline [ 1436.338859] smpboot: CPU 6 is now offline [ 1436.340150] smpboot: CPU 7 is now offline [ 1436.341208] ACPI: Low-level resume complete [ 1436.341243] PM: Restoring platform NVS memory [ 1436.341659] Enabling non-boot CPUs ... [ 1436.341697] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1436.354943] CPU1 is up [ 1436.354960] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1436.368302] CPU2 is up [ 1436.368319] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1436.381665] CPU3 is up [ 1436.381681] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 1436.395005] CPU4 is up [ 1436.395020] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 1436.408338] CPU5 is up [ 1436.408351] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 1436.421673] CPU6 is up [ 1436.421686] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 1436.435015] CPU7 is up [ 1436.440508] ACPI: Waking up from system sleep state S3 [ 1436.451451] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1436.462450] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1436.473440] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1436.550439] pcieport 0000:00:1c.7: System wakeup disabled by ACPI [ 1436.550481] PM: noirq resume of devices complete after 109.530 msecs [ 1436.550613] PM: early resume of devices complete after 0.066 msecs [ 1436.550634] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1436.550649] ahci 0000:00:1f.2: setting latency timer to 64 [ 1436.550655] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [ 1436.550771] usb usb3: root hub lost power or was reset [ 1436.550777] usb usb4: root hub lost power or was reset [ 1436.550802] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1436.550855] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1436.550961] pci 0000:05:00.0: setting latency timer to 64 [ 1436.551084] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 1436.551408] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 1436.552057] serial 00:0b: activated [ 1436.552917] tg3 0000:04:00.0 eth0: Link is down [ 1436.581205] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 1436.585347] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 1436.585579] radeon 0000:01:00.0: WB enabled [ 1436.585584] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 1436.586847] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 1436.586854] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 1436.586855] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 1436.586859] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 1436.586862] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 1436.606124] [drm] ring test on 0 succeeded in 0 usecs [ 1436.606203] [drm] ring test on 3 succeeded in 0 usecs [ 1436.606232] [drm] ring test on 4 succeeded in 1 usecs [ 1436.613711] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [ 1436.613716] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [ 1436.613721] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [ 1436.613725] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [ 1436.613729] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [ 1436.613734] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [ 1436.613738] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [ 1436.613743] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [ 1436.855183] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1436.855188] ata8: SATA link down (SStatus 0 SControl 300) [ 1436.856178] ata7: SATA link down (SStatus 0 SControl 300) [ 1436.857162] ata5: SATA link down (SStatus 0 SControl 300) [ 1436.863161] ata2: SATA link down (SStatus 0 SControl 300) [ 1436.865162] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1436.867348] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1436.867350] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1436.867351] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1436.871476] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1436.871478] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1436.871479] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1436.873123] ata6.00: configured for UDMA/100 [ 1436.880935] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1436.880937] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1436.880938] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1437.025494] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1437.025495] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1437.025496] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1437.097939] ata1.00: configured for UDMA/100 [ 1437.132019] sd 0:0:0:0: [sda] Starting disk [ 1437.132075] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1437.781870] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1438.280696] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 1438.280698] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 1438.280698] tg3 0000:04:00.0 eth0: EEE is disabled [ 1438.801409] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1439.820947] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1440.840484] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1441.860021] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1441.904232] ata3: link is slow to respond, please be patient (ready=0) [ 1441.907230] ata4: link is slow to respond, please be patient (ready=0) [ 1442.879559] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1443.899098] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1444.302849] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1444.323469] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1444.323471] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1444.323472] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1444.327603] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1444.327605] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1444.327606] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1444.329594] ata4.00: configured for UDMA/133 [ 1444.339840] sd 3:0:0:0: [sdc] Starting disk [ 1444.918635] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1445.938172] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1446.593515] ata3: COMRESET failed (errno=-16) [ 1446.957710] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 1446.977701] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 1446.977704] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 1446.979087] [drm] ib test on ring 0 succeeded in 0 usecs [ 1446.979534] [drm] ib test on ring 3 succeeded in 0 usecs [ 1446.979980] [drm] ib test on ring 4 succeeded in 0 usecs [ 1448.223592] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1448.333999] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1448.334003] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1448.334005] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1448.504927] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1448.504931] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1448.504933] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1448.506725] ata3.00: configured for UDMA/133 [ 1448.517452] sd 2:0:0:0: [sdb] Starting disk [ 1448.565878] input input3: event field not found [ 1448.565879] input input3: event field not found [ 1448.565880] input input3: event field not found [ 1448.565881] input input3: event field not found [ 1448.565881] input input3: event field not found [ 1448.565882] input input3: event field not found [ 1448.566119] PM: resume of devices complete after 12022.467 msecs [ 1434.625029] ...40%...60%...80% [ 1448.571094] Restarting tasks ... [ 1448.574123] done. [ 1448.597747] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.10.1+ - Compiler vers. : 4.7 - Attempt number : 5 - Parameters : 0 143368 0 1 4096 3 - Overall expected compression percentage: 40. - Compressor is 'lzo'. Compressed 2312302592 bytes into 712253574 (69 percent compression). - Block I/O active. Used 176230 pages from swap on /dev/sda9. - Max outstanding reads 2482. Max writes 47604. Memory_needed: 1024 x (4096 + 344 + 104) = 4653056 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2097151 pages. - I/O speed: Write 821 MB/s, Read 927 MB/s. - Extra pages : 35918 used/35000. - Result : Succeeded. [ 1448.615099] ata1.00: configured for UDMA/100 [ 1448.615102] ata1: EH complete [ 1449.820710] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [ 4592.965760] tun: Universal TUN/TAP device driver, 1.6 [ 4592.965762] tun: (C) 1999-2004 Max Krasnyansky [ 8345.306107] ata1.00: configured for UDMA/100 [ 8345.306110] ata1: EH complete [ 8345.306170] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8345.436879] TuxOnIce 3.3, with support for usm, compression, block i/o, swap storage, userui. [ 8345.439623] Initiating a hibernation cycle. [ 8345.441461] Console is 67x240. [ 8345.441503] Using configuration file /etc/splash/tuxonice/1920x1080.cfg. [ 8345.441532] parse error @ line 22 [ 8345.441535] parse error @ line 23 [ 8345.475257] Framebuffer support initialised successfully. [ 8345.478610] Starting other threads.Freezing user space processes ... (elapsed 0.01 seconds) done. [ 8345.493479] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8345.545208] hpet1: lost 2 rtc interrupts [ 8345.598888] hpet1: lost 1 rtc interrupts [ 8345.769234] Restarting kernel threads ... done. [ 8346.319042] hpet1: lost 1 rtc interrupts [ 8346.374938] hpet1: lost 2 rtc interrupts [ 8346.449234] Asked shrink_memory_mask for 1848217 low pages & 0 pages from anywhere, got 1848217. [ 8346.449235] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8346.570187] hpet1: lost 3 rtc interrupts [ 8346.644317] Restarting kernel threads ... done. [ 8346.772284] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8346.893098] hpet1: lost 2 rtc interrupts [ 8357.029515] Waited for i/o due to synchronous I/O 2 times. [ 8357.029516] Waited for i/o due to throughput_throttle 4541 times. [ 8357.031802] Suspending console(s) (use no_console_suspend to debug) [ 8357.032086] serial 00:0b: disabled [ 8357.032093] serial 00:0b: System wakeup disabled by ACPI [ 8357.032124] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 8357.302534] PM: freeze of devices complete after 270.881 msecs [ 8357.302666] PM: late freeze of devices complete after 0.131 msecs [ 8357.303401] PM: noirq freeze of devices complete after 0.734 msecs [ 8357.303668] ACPI: Preparing to enter system sleep state S4 [ 8357.703499] PM: Saving platform NVS memory [ 8357.703822] Disabling non-boot CPUs ... [ 8357.705056] smpboot: CPU 1 is now offline [ 8357.706413] smpboot: CPU 2 is now offline [ 8357.707772] smpboot: CPU 3 is now offline [ 8357.709315] smpboot: CPU 4 is now offline [ 8357.710653] smpboot: CPU 5 is now offline [ 8357.711944] smpboot: CPU 6 is now offline [ 8357.713269] smpboot: CPU 7 is now offline [ 8357.714371] Enabling non-boot CPUs ... [ 8357.714398] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 8357.727690] CPU1 is up [ 8357.727701] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 8357.740989] CPU2 is up [ 8357.741000] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 8357.754301] CPU3 is up [ 8357.754312] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 8357.767620] CPU4 is up [ 8357.767632] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 8357.780930] CPU5 is up [ 8357.780940] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 8357.794254] CPU6 is up [ 8357.794264] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 8357.807568] CPU7 is up [ 8357.811866] ACPI: Waking up from system sleep state S4 [ 8357.812344] PM: noirq thaw of devices complete after 0.071 msecs [ 8357.812462] PM: early thaw of devices complete after 0.054 msecs [ 8357.812646] pci 0000:05:00.0: setting latency timer to 64 [ 8357.812703] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 8357.812705] ahci 0000:00:1f.2: setting latency timer to 64 [ 8357.813168] serial 00:0b: activated [ 8357.814499] tg3 0000:04:00.0 eth0: Link is down [ 8357.823423] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 8357.836119] [drm] PCIE gen 2 link speeds already enabled [ 8357.838157] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 8357.838253] radeon 0000:01:00.0: WB enabled [ 8357.838255] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 8357.838848] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 8357.838849] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 8357.838850] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 8357.838852] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 8357.838853] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 8357.857754] [drm] ring test on 0 succeeded in 0 usecs [ 8357.857832] [drm] ring test on 3 succeeded in 0 usecs [ 8357.857942] [drm] ring test on 4 succeeded in 1 usecs [ 8358.117041] ata5: SATA link down (SStatus 0 SControl 300) [ 8358.117046] ata8: SATA link down (SStatus 0 SControl 300) [ 8358.117080] ata7: SATA link down (SStatus 0 SControl 300) [ 8358.121016] ata2: SATA link down (SStatus 0 SControl 300) [ 8358.124017] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8358.126015] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8358.128019] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8358.128123] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8358.128124] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8358.128125] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8358.129273] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8358.129275] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8358.129276] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8358.131809] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8358.131810] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8358.131811] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8358.132098] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8358.132099] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8358.132100] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8358.132872] ata3.00: configured for UDMA/133 [ 8358.133712] ata6.00: configured for UDMA/100 [ 8358.144658] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8358.144660] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8358.144661] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8358.148912] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8358.148913] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8358.148915] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8358.150930] ata4.00: configured for UDMA/133 [ 8358.322899] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8358.323339] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8358.323340] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8358.323341] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8358.324120] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8358.324122] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8358.324123] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8358.324446] ata1.00: configured for UDMA/100 [ 8359.033519] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8359.561923] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 8359.561924] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 8359.561924] tg3 0000:04:00.0 eth0: EEE is disabled [ 8360.053057] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8361.072595] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8362.092133] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8363.111671] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8364.131209] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8365.150746] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8366.170283] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8367.189822] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8368.209360] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8368.229351] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 8368.229354] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 8368.230736] [drm] ib test on ring 0 succeeded in 0 usecs [ 8368.231158] [drm] ib test on ring 3 succeeded in 0 usecs [ 8368.231578] [drm] ib test on ring 4 succeeded in 0 usecs [ 8368.290688] PM: thaw of devices complete after 10484.297 msecs [ 8347.222489] ...20%...40%...60%...80% [ 8368.356877] ...20% [ 8369.476217] Waited for i/o due to throughput_throttle 563 times. [ 8368.424420] ...40%...60%...80% [ 8370.456653] ...20% [ 8375.215780] Waited for i/o due to readahead not ready 3014 times. [ 8375.215781] Waited for i/o due to synchronous I/O 1 times. [ 8375.215782] Waited for i/o due to throughput_throttle 12197 times. [ 8375.215890] Suspending console(s) (use no_console_suspend to debug) [ 8375.216444] input input3: event field not found [ 8375.216540] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 8375.216541] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 8375.216545] sd 0:0:0:0: [sda] Stopping disk [ 8375.216610] sd 3:0:0:0: [sdc] Stopping disk [ 8375.216660] sd 2:0:0:0: [sdb] Stopping disk [ 8375.223175] serial 00:0b: disabled [ 8375.223178] serial 00:0b: System wakeup disabled by ACPI [ 8375.223191] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 8375.946713] PM: suspend of devices complete after 731.181 msecs [ 8375.946836] PM: late suspend of devices complete after 0.122 msecs [ 8375.947007] pcieport 0000:00:1c.7: System wakeup enabled by ACPI [ 8375.958003] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [ 8375.968791] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 8375.979887] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 8375.990719] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 8376.001703] PM: noirq suspend of devices complete after 54.896 msecs [ 8376.002384] ACPI: Preparing to enter system sleep state S3 [ 8376.401603] PM: Saving platform NVS memory [ 8376.401936] Disabling non-boot CPUs ... [ 8376.403177] smpboot: CPU 1 is now offline [ 8376.404534] smpboot: CPU 2 is now offline [ 8376.405888] smpboot: CPU 3 is now offline [ 8376.407433] smpboot: CPU 4 is now offline [ 8376.408743] smpboot: CPU 5 is now offline [ 8376.409987] smpboot: CPU 6 is now offline [ 8376.411273] smpboot: CPU 7 is now offline [ 8376.412313] ACPI: Low-level resume complete [ 8376.412346] PM: Restoring platform NVS memory [ 8376.412762] Enabling non-boot CPUs ... [ 8376.412812] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 8376.426054] CPU1 is up [ 8376.426071] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 8376.439412] CPU2 is up [ 8376.439428] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 8376.452788] CPU3 is up [ 8376.452804] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 8376.466130] CPU4 is up [ 8376.466144] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 8376.479461] CPU5 is up [ 8376.479474] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 8376.492807] CPU6 is up [ 8376.492820] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 8376.506150] CPU7 is up [ 8376.511625] ACPI: Waking up from system sleep state S3 [ 8376.522769] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 8376.533769] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 8376.544759] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 8376.621757] pcieport 0000:00:1c.7: System wakeup disabled by ACPI [ 8376.621799] PM: noirq resume of devices complete after 109.741 msecs [ 8376.621932] PM: early resume of devices complete after 0.067 msecs [ 8376.621953] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 8376.621967] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [ 8376.621975] ahci 0000:00:1f.2: setting latency timer to 64 [ 8376.622172] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8376.622290] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8376.622349] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 8376.622378] pci 0000:05:00.0: setting latency timer to 64 [ 8376.624095] tg3 0000:04:00.0 eth0: Link is down [ 8376.650009] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 8376.653959] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 8376.654111] radeon 0000:01:00.0: WB enabled [ 8376.654120] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 8376.655352] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 8376.655355] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 8376.655357] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 8376.655359] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 8376.655362] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 8376.674571] [drm] ring test on 0 succeeded in 0 usecs [ 8376.674649] [drm] ring test on 3 succeeded in 0 usecs [ 8376.674672] [drm] ring test on 4 succeeded in 1 usecs [ 8376.778264] usb usb3: root hub lost power or was reset [ 8376.778265] usb usb4: root hub lost power or was reset [ 8376.778496] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 8376.778940] serial 00:0b: activated [ 8376.841028] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [ 8376.841033] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [ 8376.841038] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [ 8376.841043] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [ 8376.841047] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [ 8376.841051] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [ 8376.841056] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [ 8376.841060] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [ 8377.082431] ata8: SATA link down (SStatus 0 SControl 300) [ 8377.082433] ata2: SATA link down (SStatus 0 SControl 300) [ 8377.082466] ata7: SATA link down (SStatus 0 SControl 300) [ 8377.086401] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8377.088391] ata5: SATA link down (SStatus 0 SControl 300) [ 8377.092390] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8377.118262] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8377.118263] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8377.118265] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8377.201355] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8377.201357] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8377.201358] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8377.206361] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8377.206363] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8377.206364] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8377.206731] ata1.00: configured for UDMA/100 [ 8377.215514] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8377.215515] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8377.215517] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8377.217158] ata6.00: configured for UDMA/100 [ 8377.217326] sd 0:0:0:0: [sda] Starting disk [ 8377.217387] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8377.850277] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8378.312571] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 8378.312573] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 8378.312573] tg3 0000:04:00.0 eth0: EEE is disabled [ 8378.869815] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8379.889354] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8380.908892] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8381.928430] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8382.130461] ata3: link is slow to respond, please be patient (ready=0) [ 8382.136458] ata4: link is slow to respond, please be patient (ready=0) [ 8382.947969] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8383.967508] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8384.328195] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8384.348881] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8384.348882] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8384.348883] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8384.353062] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8384.353063] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8384.353064] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8384.355078] ata4.00: configured for UDMA/133 [ 8384.365211] sd 3:0:0:0: [sdc] Starting disk [ 8384.987047] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8386.006585] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8386.819744] ata3: COMRESET failed (errno=-16) [ 8387.026122] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8387.046114] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 8387.046117] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 8387.047503] [drm] ib test on ring 0 succeeded in 0 usecs [ 8387.047950] [drm] ib test on ring 3 succeeded in 0 usecs [ 8387.048397] [drm] ib test on ring 4 succeeded in 0 usecs [ 8388.194968] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8388.305303] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8388.305306] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8388.305309] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8388.422576] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8388.422579] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8388.422582] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8388.424242] ata3.00: configured for UDMA/133 [ 8388.434864] sd 2:0:0:0: [sdb] Starting disk [ 8388.481660] input input3: event field not found [ 8388.481662] input input3: event field not found [ 8388.481664] input input3: event field not found [ 8388.481665] input input3: event field not found [ 8388.481674] input input3: event field not found [ 8388.481675] input input3: event field not found [ 8388.481911] PM: resume of devices complete after 11866.850 msecs [ 8370.866420] ...40%...60%...80% [ 8388.485733] Restarting tasks ... [ 8388.487474] done. [ 8388.558217] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.10.1+ - Compiler vers. : 4.7 - Attempt number : 6 - Parameters : 0 143368 0 1 4096 3 - Overall expected compression percentage: 40. - Compressor is 'lzo'. Compressed 4211068928 bytes into 2975643126 (29 percent compression). - Block I/O active. Used 730626 pages from swap on /dev/sda9. - Max outstanding reads 139886. Max writes 134124. Memory_needed: 1024 x (4096 + 344 + 104) = 4653056 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2097151 pages. - I/O speed: Write 357 MB/s, Read 209 MB/s. - Extra pages : 28962 used/35000. - Result : Succeeded. [ 8388.580959] ata1.00: configured for UDMA/100 [ 8388.580962] ata1: EH complete [ 8391.311123] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [ 8677.410656] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 8882.086117] ata1.00: configured for UDMA/100 [ 8882.086122] ata1: EH complete [ 8882.086231] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8882.210748] TuxOnIce 3.3, with support for usm, compression, block i/o, swap storage, userui. [ 8882.214743] Initiating a hibernation cycle. [ 8882.218218] Console is 67x240. [ 8882.218263] Using configuration file /etc/splash/tuxonice/1920x1080.cfg. [ 8882.218507] parse error @ line 22 [ 8882.218513] parse error @ line 23 [ 8882.252693] Framebuffer support initialised successfully. [ 8882.256064] Starting other threads.Freezing user space processes ... (elapsed 0.01 seconds) done. [ 8882.273705] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8882.307880] hpet1: lost 1 rtc interrupts [ 8882.375374] hpet1: lost 2 rtc interrupts [ 8882.497480] Restarting kernel threads ... done. [ 8882.791518] hpet1: lost 3 rtc interrupts [ 8882.865168] Asked shrink_memory_mask for 496239 low pages & 0 pages from anywhere, got 496239. [ 8882.865169] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8882.986020] hpet1: lost 2 rtc interrupts [ 8883.059623] Restarting kernel threads ... done. [ 8883.204038] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8883.325404] hpet1: lost 3 rtc interrupts [ 8891.377981] Waited for i/o due to synchronous I/O 2 times. [ 8891.377984] Waited for i/o due to throughput_throttle 4381 times. [ 8891.378153] Suspending console(s) (use no_console_suspend to debug) [ 8891.378466] serial 00:0b: disabled [ 8891.378473] serial 00:0b: System wakeup disabled by ACPI [ 8891.378503] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 8891.702099] PM: freeze of devices complete after 324.130 msecs [ 8891.702190] PM: late freeze of devices complete after 0.089 msecs [ 8891.702923] PM: noirq freeze of devices complete after 0.733 msecs [ 8891.703184] ACPI: Preparing to enter system sleep state S4 [ 8892.103096] PM: Saving platform NVS memory [ 8892.103455] Disabling non-boot CPUs ... [ 8892.104683] smpboot: CPU 1 is now offline [ 8892.106048] smpboot: CPU 2 is now offline [ 8892.107402] smpboot: CPU 3 is now offline [ 8892.108942] smpboot: CPU 4 is now offline [ 8892.110269] smpboot: CPU 5 is now offline [ 8892.111555] smpboot: CPU 6 is now offline [ 8892.112859] smpboot: CPU 7 is now offline [ 8892.263564] Pageset1 has grown by 71696 pages. extra_pages_allowance is currently only 35000. [ 8892.263567] Error 1 hibernating [ 8892.113905] Enabling non-boot CPUs ... [ 8892.113933] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 8892.127222] CPU1 is up [ 8892.127234] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 8892.140524] CPU2 is up [ 8892.140534] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 8892.153836] CPU3 is up [ 8892.153847] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 8892.167151] CPU4 is up [ 8892.167162] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 8892.180459] CPU5 is up [ 8892.180470] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 8892.193779] CPU6 is up [ 8892.193789] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 8892.207093] CPU7 is up [ 8892.211379] ACPI: Waking up from system sleep state S4 [ 8892.211859] PM: noirq recover of devices complete after 0.072 msecs [ 8892.216394] hpet1: lost 5404 rtc interrupts [ 8892.216510] PM: early recover of devices complete after 0.055 msecs [ 8892.216640] pci 0000:05:00.0: setting latency timer to 64 [ 8892.216705] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 8892.216750] ahci 0000:00:1f.2: setting latency timer to 64 [ 8892.217206] serial 00:0b: activated [ 8892.218556] tg3 0000:04:00.0 eth0: Link is down [ 8892.226923] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 8892.240159] [drm] PCIE gen 2 link speeds already enabled [ 8892.242198] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 8892.242330] radeon 0000:01:00.0: WB enabled [ 8892.242332] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 8892.242927] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 8892.242928] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 8892.242929] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 8892.242930] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 8892.242931] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 8892.261798] [drm] ring test on 0 succeeded in 0 usecs [ 8892.261864] [drm] ring test on 3 succeeded in 0 usecs [ 8892.261884] [drm] ring test on 4 succeeded in 1 usecs [ 8892.521575] ata8: SATA link down (SStatus 0 SControl 300) [ 8892.521609] ata7: SATA link down (SStatus 0 SControl 300) [ 8892.523559] ata5: SATA link down (SStatus 0 SControl 300) [ 8892.525566] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8892.527562] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8892.527576] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8892.527577] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8892.527578] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8892.528771] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8892.528772] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8892.528774] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8892.529555] ata2: SATA link down (SStatus 0 SControl 300) [ 8892.531048] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8892.531049] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8892.531050] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8892.531531] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8892.531533] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8892.531535] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8892.531558] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8892.532069] ata3.00: configured for UDMA/133 [ 8892.533156] ata6.00: configured for UDMA/100 [ 8892.533625] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8892.533627] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8892.533628] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8892.537684] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8892.537685] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8892.537686] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8892.539626] ata4.00: configured for UDMA/133 [ 8892.776417] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8892.776857] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8892.776859] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8892.776860] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8892.777705] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8892.777706] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8892.777707] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8892.778030] ata1.00: configured for UDMA/100 [ 8893.437440] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8893.924130] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 8893.924131] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 8893.924132] tg3 0000:04:00.0 eth0: EEE is disabled [ 8894.456978] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8895.476517] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8896.496055] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8897.515593] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8898.535132] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8899.554670] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8900.574208] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8901.593747] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8902.613285] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8902.633276] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 8902.633279] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 8902.634691] [drm] ib test on ring 0 succeeded in 0 usecs [ 8902.635112] [drm] ib test on ring 3 succeeded in 0 usecs [ 8902.635532] [drm] ib test on ring 4 succeeded in 0 usecs [ 8902.694689] PM: recover of devices complete after 10484.249 msecs [ 8885.364570] ...20%...40%...60%...80% [ 8902.698301] Restarting tasks ... [ 8902.699701] done. [ 8902.732642] Automatically adjusting the extra pages allowance to 72196 and restarting. [ 8902.732644] Initiating a hibernation cycle. [ 8902.735638] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 8902.746728] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8902.848408] hpet1: lost 2 rtc interrupts [ 8902.927536] Restarting kernel threads ... done. [ 8903.044661] hpet1: lost 3 rtc interrupts [ 8903.122587] Asked shrink_memory_mask for 546 low pages & 0 pages from anywhere, got 546. [ 8903.122589] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8903.247518] hpet1: lost 3 rtc interrupts [ 8903.325490] Restarting kernel threads ... done. [ 8903.908702] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8903.975605] hpet1: lost 1 rtc interrupts [ 8904.033642] hpet1: lost 2 rtc interrupts [ 8912.358677] Waited for i/o due to synchronous I/O 1 times. [ 8912.358680] Waited for i/o due to throughput_throttle 5021 times. [ 8912.362153] Suspending console(s) (use no_console_suspend to debug) [ 8912.362472] serial 00:0b: disabled [ 8912.362475] serial 00:0b: System wakeup disabled by ACPI [ 8912.362488] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 8912.571452] PM: freeze of devices complete after 209.416 msecs [ 8912.571534] PM: late freeze of devices complete after 0.081 msecs [ 8912.572270] PM: noirq freeze of devices complete after 0.735 msecs [ 8912.572522] ACPI: Preparing to enter system sleep state S4 [ 8912.971884] PM: Saving platform NVS memory [ 8912.972250] Disabling non-boot CPUs ... [ 8912.973707] smpboot: CPU 1 is now offline [ 8912.975033] smpboot: CPU 2 is now offline [ 8912.976391] smpboot: CPU 3 is now offline [ 8912.977742] smpboot: CPU 4 is now offline [ 8912.979244] smpboot: CPU 5 is now offline [ 8912.980525] smpboot: CPU 6 is now offline [ 8912.981827] smpboot: CPU 7 is now offline [ 8912.982871] Enabling non-boot CPUs ... [ 8912.982897] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 8912.996188] CPU1 is up [ 8912.996199] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 8913.009491] CPU2 is up [ 8913.009502] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 8913.022801] CPU3 is up [ 8913.022812] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 8913.036116] CPU4 is up [ 8913.036126] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 8913.049426] CPU5 is up [ 8913.049437] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 8913.062740] CPU6 is up [ 8913.062750] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 8913.076056] CPU7 is up [ 8913.080341] ACPI: Waking up from system sleep state S4 [ 8913.080819] PM: noirq thaw of devices complete after 0.071 msecs [ 8913.080937] PM: early thaw of devices complete after 0.055 msecs [ 8913.081089] pci 0000:05:00.0: setting latency timer to 64 [ 8913.081215] ahci 0000:00:1f.2: setting latency timer to 64 [ 8913.081360] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 8913.081685] serial 00:0b: activated [ 8913.082991] tg3 0000:04:00.0 eth0: Link is down [ 8913.091746] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 8913.104460] [drm] PCIE gen 2 link speeds already enabled [ 8913.106356] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 8913.106492] radeon 0000:01:00.0: WB enabled [ 8913.106493] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 8913.107118] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 8913.107119] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 8913.107120] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 8913.107121] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 8913.107122] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 8913.125958] [drm] ring test on 0 succeeded in 0 usecs [ 8913.126036] [drm] ring test on 3 succeeded in 0 usecs [ 8913.126147] [drm] ring test on 4 succeeded in 1 usecs [ 8913.385426] ata8: SATA link down (SStatus 0 SControl 300) [ 8913.385465] ata7: SATA link down (SStatus 0 SControl 300) [ 8913.385467] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8913.387411] ata5: SATA link down (SStatus 0 SControl 300) [ 8913.389411] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8913.390627] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8913.390628] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8913.390630] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8913.391400] ata2: SATA link down (SStatus 0 SControl 300) [ 8913.393025] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8913.393027] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8913.393028] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8913.394136] ata3.00: configured for UDMA/133 [ 8913.395400] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8913.397538] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8913.397540] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8913.397541] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8913.401576] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8913.401578] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8913.401579] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8913.402645] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8913.402647] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8913.402648] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8913.403224] ata6.00: configured for UDMA/100 [ 8913.406828] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8913.406829] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8913.406830] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8913.408822] ata4.00: configured for UDMA/133 [ 8913.546310] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8913.546788] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8913.546790] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8913.546791] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8913.547708] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8913.547710] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8913.547711] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8913.548054] ata1.00: configured for UDMA/100 [ 8914.301719] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8914.771450] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 8914.771451] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 8914.771452] tg3 0000:04:00.0 eth0: EEE is disabled [ 8915.321258] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8916.340798] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8917.360335] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8918.379872] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8919.399410] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8920.418946] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8921.438485] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8922.458022] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8923.477560] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8923.497551] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 8923.497554] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 8923.498943] [drm] ib test on ring 0 succeeded in 0 usecs [ 8923.499364] [drm] ib test on ring 3 succeeded in 0 usecs [ 8923.499785] [drm] ib test on ring 4 succeeded in 0 usecs [ 8923.558934] PM: thaw of devices complete after 10484.067 msecs [ 8906.206213] ...20%...40%...60%...80% [ 8923.657316] ...20% [ 8925.735919] Waited for i/o due to throughput_throttle 2016 times. [ 8924.276523] ...40%...60%...80% [ 8927.478081] ...20% [ 8931.465210] Waited for i/o due to readahead not ready 26768 times. [ 8931.465212] Waited for i/o due to synchronous I/O 1 times. [ 8931.465212] Waited for i/o due to throughput_throttle 34654 times. [ 8931.465321] Suspending console(s) (use no_console_suspend to debug) [ 8931.465873] input input3: event field not found [ 8931.465976] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 8931.465977] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 8931.465982] sd 0:0:0:0: [sda] Stopping disk [ 8931.466168] sd 2:0:0:0: [sdb] Stopping disk [ 8931.466362] sd 3:0:0:0: [sdc] Stopping disk [ 8931.472711] serial 00:0b: disabled [ 8931.472714] serial 00:0b: System wakeup disabled by ACPI [ 8931.472726] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 8932.188591] PM: suspend of devices complete after 723.626 msecs [ 8932.188668] PM: late suspend of devices complete after 0.076 msecs [ 8932.188843] pcieport 0000:00:1c.7: System wakeup enabled by ACPI [ 8932.199826] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [ 8932.210613] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 8932.221708] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 8932.232538] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 8932.243525] PM: noirq suspend of devices complete after 54.886 msecs [ 8932.244206] ACPI: Preparing to enter system sleep state S3 [ 8932.643424] PM: Saving platform NVS memory [ 8932.643797] Disabling non-boot CPUs ... [ 8932.645043] smpboot: CPU 1 is now offline [ 8932.646399] smpboot: CPU 2 is now offline [ 8932.647754] smpboot: CPU 3 is now offline [ 8932.649105] smpboot: CPU 4 is now offline [ 8932.650600] smpboot: CPU 5 is now offline [ 8932.651867] smpboot: CPU 6 is now offline [ 8932.653162] smpboot: CPU 7 is now offline [ 8932.654240] ACPI: Low-level resume complete [ 8932.654274] PM: Restoring platform NVS memory [ 8932.654689] Enabling non-boot CPUs ... [ 8932.654725] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 8932.668067] CPU1 is up [ 8932.668083] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 8932.681427] CPU2 is up [ 8932.681443] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 8932.694790] CPU3 is up [ 8932.694807] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 8932.708134] CPU4 is up [ 8932.708147] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 8932.721467] CPU5 is up [ 8932.721480] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 8932.734803] CPU6 is up [ 8932.734815] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 8932.748144] CPU7 is up [ 8932.753636] ACPI: Waking up from system sleep state S3 [ 8932.764589] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 8932.775589] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 8932.786579] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 8932.863578] pcieport 0000:00:1c.7: System wakeup disabled by ACPI [ 8932.863619] PM: noirq resume of devices complete after 109.540 msecs [ 8932.863751] PM: early resume of devices complete after 0.066 msecs [ 8932.863774] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 8932.863790] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [ 8932.863793] ahci 0000:00:1f.2: setting latency timer to 64 [ 8932.863896] usb usb3: root hub lost power or was reset [ 8932.863901] usb usb4: root hub lost power or was reset [ 8932.863989] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8932.864053] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8932.864262] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 8932.864272] pci 0000:05:00.0: setting latency timer to 64 [ 8932.866052] tg3 0000:04:00.0 eth0: Link is down [ 8932.895428] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 8932.900897] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [ 8932.901258] radeon 0000:01:00.0: WB enabled [ 8932.901262] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [ 8932.902671] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [ 8932.902672] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [ 8932.902673] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [ 8932.902674] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [ 8932.902675] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [ 8932.921626] [drm] ring test on 0 succeeded in 0 usecs [ 8932.921704] [drm] ring test on 3 succeeded in 0 usecs [ 8932.921731] [drm] ring test on 4 succeeded in 1 usecs [ 8932.927016] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [ 8932.927030] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [ 8932.927034] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [ 8932.927039] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [ 8932.927053] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [ 8932.927057] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [ 8932.927061] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [ 8932.927074] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [ 8932.927795] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 8932.928738] serial 00:0b: activated [ 8933.168315] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8933.170305] ata2: SATA link down (SStatus 0 SControl 300) [ 8933.194028] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8933.194030] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8933.194031] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8933.232276] ata8: SATA link down (SStatus 0 SControl 300) [ 8933.232310] ata7: SATA link down (SStatus 0 SControl 300) [ 8933.234268] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8933.236265] ata5: SATA link down (SStatus 0 SControl 300) [ 8933.338591] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8933.338592] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8933.338593] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8933.411042] ata1.00: configured for UDMA/100 [ 8933.445152] sd 0:0:0:0: [sda] Starting disk [ 8933.445216] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8933.466387] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8933.466388] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8933.466389] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8933.480446] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8933.480448] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8933.480449] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8933.482094] ata6.00: configured for UDMA/100 [ 8934.097409] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8934.574185] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [ 8934.574186] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [ 8934.574187] tg3 0000:04:00.0 eth0: EEE is disabled [ 8935.116947] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8936.136484] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8937.156022] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8938.175560] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8938.218366] ata3: link is slow to respond, please be patient (ready=0) [ 8938.277336] ata4: link is slow to respond, please be patient (ready=0) [ 8939.195097] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8940.214634] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8940.621985] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8940.642428] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8940.642429] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8940.642431] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8940.646619] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8940.646621] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8940.646622] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8940.648616] ata4.00: configured for UDMA/133 [ 8940.658997] sd 3:0:0:0: [sdc] Starting disk [ 8941.234172] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8942.253709] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8942.907648] ata3: COMRESET failed (errno=-16) [ 8943.273246] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8943.293237] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 8943.293240] [drm:cayman_startup] *ERROR* radeon: failed initializing UVD (-1). [ 8943.294653] [drm] ib test on ring 0 succeeded in 0 usecs [ 8943.295100] [drm] ib test on ring 3 succeeded in 0 usecs [ 8943.295548] [drm] ib test on ring 4 succeeded in 0 usecs [ 8944.486756] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8944.624106] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8944.624110] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8944.624112] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8944.741304] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 8944.741307] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 8944.741310] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 8944.742961] ata3.00: configured for UDMA/133 [ 8944.753705] sd 2:0:0:0: [sdb] Starting disk [ 8944.800509] input input3: event field not found [ 8944.800510] input input3: event field not found [ 8944.800511] input input3: event field not found [ 8944.800511] input input3: event field not found [ 8944.800512] input input3: event field not found [ 8944.800513] input input3: event field not found [ 8944.800746] PM: resume of devices complete after 11943.910 msecs [ 8928.144046] ...40%...60%...80% [ 8944.803565] Restarting tasks ... [ 8944.806169] done. [ 8944.859827] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.10.1+ - Compiler vers. : 4.7 - Attempt number : 8 - Parameters : 0 143368 0 1 4096 3 - Overall expected compression percentage: 40. - Compressor is 'lzo'. Compressed 7142690816 bytes into 4836509288 (32 percent compression). - Block I/O active. Used 647665 pages from swap on /dev/sda9. - Max outstanding reads 3637. Max writes 67762. Memory_needed: 1024 x (4096 + 344 + 104) = 4653056 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2097151 pages. - I/O speed: Write 393 MB/s, Read 272 MB/s. - Extra pages : 1717 used/72196. - Result : Succeeded. [ 8944.876435] ata1.00: configured for UDMA/100 [ 8944.876438] ata1: EH complete [ 8945.909321] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [11208.307323] ata1.00: configured for UDMA/100 [11208.307328] ata1: EH complete [11208.307438] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [11208.428171] TuxOnIce 3.3, with support for usm, compression, block i/o, swap storage, userui. [11208.431545] Initiating a hibernation cycle. [11208.433407] Console is 67x240. [11208.433453] Using configuration file /etc/splash/tuxonice/1920x1080.cfg. [11208.433484] parse error @ line 22 [11208.433486] parse error @ line 23 [11208.476878] Framebuffer support initialised successfully. [11208.480674] Starting other threads.Freezing user space processes ... (elapsed 0.01 seconds) done. [11208.496767] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [11208.552179] hpet1: lost 1 rtc interrupts [11208.603553] hpet1: lost 2 rtc interrupts [11208.707936] Restarting kernel threads ... done. [11208.918181] hpet1: lost 3 rtc interrupts [11208.986327] Asked shrink_memory_mask for 182196 low pages & 0 pages from anywhere, got 182196. [11208.986329] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [11209.035625] hpet1: lost 1 rtc interrupts [11209.109307] hpet1: lost 2 rtc interrupts [11209.177334] Restarting kernel threads ... done. [11209.360106] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [11209.426323] hpet1: lost 1 rtc interrupts [11209.482625] hpet1: lost 2 rtc interrupts [11213.965689] Waited for i/o due to synchronous I/O 2 times. [11213.965692] Waited for i/o due to throughput_throttle 1878 times. [11213.968605] Suspending console(s) (use no_console_suspend to debug) [11213.977449] serial 00:0b: disabled [11213.977452] serial 00:0b: System wakeup disabled by ACPI [11213.977460] i8042 kbd 00:0a: System wakeup enabled by ACPI [11214.535380] PM: freeze of devices complete after 567.099 msecs [11214.535460] PM: late freeze of devices complete after 0.079 msecs [11214.536194] PM: noirq freeze of devices complete after 0.733 msecs [11214.536441] ACPI: Preparing to enter system sleep state S4 [11214.936124] PM: Saving platform NVS memory [11214.936539] Disabling non-boot CPUs ... [11214.937995] smpboot: CPU 1 is now offline [11214.939334] smpboot: CPU 2 is now offline [11214.940690] smpboot: CPU 3 is now offline [11214.942222] smpboot: CPU 4 is now offline [11214.943755] smpboot: CPU 5 is now offline [11214.945032] smpboot: CPU 6 is now offline [11214.946359] smpboot: CPU 7 is now offline [11214.947202] PM: Restoring platform NVS memory [11214.947595] Enabling non-boot CPUs ... [11214.947621] smpboot: Booting Node 0 Processor 1 APIC 0x2 [11214.960915] CPU1 is up [11214.960926] smpboot: Booting Node 0 Processor 2 APIC 0x4 [11214.974218] CPU2 is up [11214.974229] smpboot: Booting Node 0 Processor 3 APIC 0x6 [11214.987524] CPU3 is up [11214.987535] smpboot: Booting Node 0 Processor 4 APIC 0x1 [11215.000837] CPU4 is up [11215.000848] smpboot: Booting Node 0 Processor 5 APIC 0x3 [11215.014147] CPU5 is up [11215.014158] smpboot: Booting Node 0 Processor 6 APIC 0x5 [11215.027463] CPU6 is up [11215.027473] smpboot: Booting Node 0 Processor 7 APIC 0x7 [11215.040780] CPU7 is up [11215.045065] ACPI: Waking up from system sleep state S4 [11215.067199] PM: noirq restore of devices complete after 21.743 msecs [11215.073458] hpet1: lost 7464 rtc interrupts [11215.073570] PM: early restore of devices complete after 0.055 msecs [11215.073596] xhci_hcd 0000:00:14.0: setting latency timer to 64 [11215.073605] usb usb1: root hub lost power or was reset [11215.073605] usb usb2: root hub lost power or was reset [11215.073696] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X [11215.073741] ehci-pci 0000:00:1a.0: setting latency timer to 64 [11215.073748] usb usb5: root hub lost power or was reset [11215.077614] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [11215.077620] ehci-pci 0000:00:1d.0: setting latency timer to 64 [11215.077630] usb usb6: root hub lost power or was reset [11215.081519] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [11215.081525] ahci 0000:00:1f.2: setting latency timer to 64 [11215.101856] [drm] PCIE gen 2 link speeds already enabled [11215.103714] [drm] PCIE GART of 512M enabled (table at 0x0000000000375000). [11215.103866] radeon 0000:01:00.0: WB enabled [11215.103867] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88040b17fc00 [11215.104460] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005d32118 [11215.104461] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88040b17fc04 [11215.104462] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88040b17fc08 [11215.104463] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88040b17fc0c [11215.104464] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88040b17fc10 [11215.123103] [drm] ring test on 0 succeeded in 3 usecs [11215.123162] [drm] ring test on 3 succeeded in 2 usecs [11215.123168] [drm] ring test on 4 succeeded in 1 usecs [11215.299126] [drm] ring test on 5 succeeded in 1 usecs [11215.299128] [drm] UVD initialized successfully. [11215.300276] [drm] ib test on ring 0 succeeded in 0 usecs [11215.300695] [drm] ib test on ring 3 succeeded in 0 usecs [11215.301116] [drm] ib test on ring 4 succeeded in 0 usecs [11225.446158] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec [11225.446159] radeon 0000:01:00.0: GPU lockup (waiting for 0x000000000000000a last fence id 0x0000000000000008) [11225.446160] [drm:r600_uvd_ib_test] *ERROR* radeon: fence wait failed (-35). [11225.446163] [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35). [11225.520591] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [11225.524858] tg3 0000:04:00.0 eth0: Link is down [11225.679017] pci 0000:05:00.0: setting latency timer to 64 [11225.718181] usb usb3: root hub lost power or was reset [11225.718182] usb usb4: root hub lost power or was reset [11225.780924] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X [11225.780927] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X [11225.780929] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X [11225.780931] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X [11225.780933] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X [11225.780936] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X [11225.780938] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X [11225.780940] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X [11225.781105] i8042 kbd 00:0a: System wakeup disabled by ACPI [11225.781409] serial 00:0b: activated [11226.085580] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [11226.086066] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [11226.086069] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [11226.086072] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [11226.086933] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [11226.086936] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [11226.086939] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [11226.087245] ata1.00: configured for UDMA/100 [11226.097682] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [11226.402385] ata2: SATA link down (SStatus 0 SControl 300) [11226.718204] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [11226.719414] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [11226.719418] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [11226.719420] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [11226.721825] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [11226.721828] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [11226.721830] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [11226.722855] ata3.00: configured for UDMA/133 [11227.049017] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [11227.069727] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [11227.069731] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [11227.069733] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [11227.073949] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [11227.073950] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [11227.073951] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [11227.075891] ata4.00: configured for UDMA/133 [11227.213339] tg3 0000:04:00.0 eth0: Link is up at 100 Mbps, full duplex [11227.213340] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX [11227.213340] tg3 0000:04:00.0 eth0: EEE is disabled [11227.390817] ata5: SATA link down (SStatus 0 SControl 300) [11227.706636] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [11227.708766] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [11227.708770] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [11227.708772] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [11227.712803] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [11227.712806] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [11227.712809] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [11227.714447] ata6.00: configured for UDMA/100 [11228.030458] ata7: SATA link down (SStatus 0 SControl 300) [11228.335280] ata8: SATA link down (SStatus 0 SControl 300) [11228.335625] sd 0:0:0:0: [sda] Starting disk [11228.335857] sd 2:0:0:0: [sdb] Starting disk [11228.798462] sd 3:0:0:0: [sdc] Starting disk [11229.779442] usb 5-1: reset high-speed USB device number 2 using ehci-pci [11230.198199] usb 6-1: reset high-speed USB device number 2 using ehci-pci [11230.589029] usb 5-1.4: reset high-speed USB device number 3 using ehci-pci [11230.747945] usb 6-1.5: reset full-speed USB device number 3 using ehci-pci [11230.836945] input input3: event field not found [11230.836947] input input3: event field not found [11230.836949] input input3: event field not found [11230.836951] input input3: event field not found [11230.836952] input input3: event field not found [11230.836954] input input3: event field not found [11230.837000] PM: restore of devices complete after 15772.564 msecs [11233.147970] Waited for i/o due to readahead not ready 6674 times. [11233.147971] Waited for i/o due to throughput_throttle 7647 times. [11209.685265] ...20%...40%...60%...80%...20%...40%...60%...80% [11233.151209] Restarting tasks ... [11233.154432] done. [11233.194260] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.10.1+ - Compiler vers. : 4.7 - Attempt number : 9 - Parameters : 0 143368 0 1 4096 4 - Overall expected compression percentage: 40. - Compressor is 'lzo'. Compressed 3793752064 bytes into 1705385849 (55 percent compression). - Block I/O active. Used 420107 pages from swap on /dev/sda9. - Max outstanding reads 83484. Max writes 66446. Memory_needed: 1024 x (4096 + 344 + 104) = 4653056 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2097151 pages. - I/O speed: Write 556 MB/s, Read 1053 MB/s. - Extra pages : 61970 used/70000. - Result : Succeeded. [11233.209502] ata1.00: configured for UDMA/100 [11233.209505] ata1: EH complete [11233.634627] Adding 8388604k swap on /dev/sda9. Priority:-1 extents:1 across:8388604k SSFS [11320.388593] radeon 0000:01:00.0: ffff8803c8d34800 pin failed [11320.388594] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11320.424927] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11320.424928] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.582969] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.582971] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.596221] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.596222] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.612948] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.612949] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.629706] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.629707] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.646248] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.646249] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.662573] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.662574] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.682725] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.682727] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.695678] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.695680] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11321.711915] radeon 0000:01:00.0: ffff8801ffcf1000 pin failed [11321.711916] [drm:radeon_crtc_page_flip] *ERROR* failed to pin new rbo buffer before flip [11332.853294] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) force-fb(V) show-blocked-tasks(w)