From dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.3-300.fc19.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.8.1 20130603 (Red Hat 4.8.1-1) (GCC) ) #1 SMP Fri Jul 26 00:00:58 UTC 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.3-300.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root quiet LANG=en_US.UTF-8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfeeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfef2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfef3000-0x00000000cfefffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000127ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Shuttle Inc SN78S/FN78S, BIOS 6.00 PG 11/06/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x128000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000D0000000 mask FFFFF8000000 write-back [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 5 base 000120000000 mask FFFFF8000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000128000000 aka 4736M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfef0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f3e60-0x000f3e6f] mapped at [ffff8800000f3e60] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x127e00000-0x127ffffff] [ 0.000000] [mem 0x127e00000-0x127ffffff] page 2M [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x124000000-0x127dfffff] [ 0.000000] [mem 0x124000000-0x127dfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x123ffffff] [ 0.000000] [mem 0x100000000-0x123ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfeeffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcfeeffff] page 4k [ 0.000000] RAMDISK: [mem 0x36d80000-0x376b7fff] [ 0.000000] ACPI: RSDP 00000000000f80b0 00014 (v00 Shuttl) [ 0.000000] ACPI: RSDT 00000000cfef3000 0003C (v01 Shuttl Shuttle 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000cfef3080 00074 (v01 Shuttl Shuttle 42302E31 AWRD 00000000) [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130328/tbfadt-603) [ 0.000000] ACPI: DSDT 00000000cfef3100 0AC0A (v01 SHUTTL SN78SV10 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfef1900 00040 [ 0.000000] ACPI: SSDT 00000000cfefde00 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfefe700 00038 (v01 Shuttl Shuttle 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000cfefe740 0003C (v01 Shuttl Shuttle 42302E31 AWRD 00000000) [ 0.000000] ACPI: SLIC 00000000cfefe780 00176 (v01 Shuttl Shuttle 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000cfefdd40 0008E (v01 Shuttl Shuttle 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000127ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x127ffffff] [ 0.000000] NODE_DATA [mem 0x127fea000-0x127ffdfff] [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880123800000-ffff8801275fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x127ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xcfeeffff] [ 0.000000] node 0: [mem 0x100000000-0x127ffffff] [ 0.000000] On node 0 totalpages: 1015438 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13244 pages used for memmap [ 0.000000] DMA32 zone: 847600 pages, LIFO batch:31 [ 0.000000] Normal zone: 2560 pages used for memmap [ 0.000000] Normal zone: 163840 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cfef3000 [ 0.000000] PM: Registered nosave memory: 00000000cfef3000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000d8000000 [ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xd8000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880127c00000 s85568 r8192 d20928 u524288 [ 0.000000] pcpu-alloc: s85568 r8192 d20928 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999549 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.3-300.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root quiet LANG=en_US.UTF-8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 3840268k/4849664k available (6486k kernel code, 787912k absent, 221484k reserved, 6780k data, 1412k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:8448 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16252928 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2999.821 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.64 BogoMIPS (lpj=2999821) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000033] Security Framework initialized [ 0.000041] SELinux: Initializing. [ 0.000048] SELinux: Starting in permissive mode [ 0.000368] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001660] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002252] Mount-cache hash table entries: 256 [ 0.002441] Initializing cgroup subsys memory [ 0.002453] Initializing cgroup subsys devices [ 0.002455] Initializing cgroup subsys freezer [ 0.002457] Initializing cgroup subsys net_cls [ 0.002458] Initializing cgroup subsys blkio [ 0.002460] Initializing cgroup subsys perf_event [ 0.002484] tseg: 00cff00000 [ 0.002487] CPU: Physical Processor ID: 0 [ 0.002488] CPU: Processor Core ID: 0 [ 0.002489] mce: CPU supports 6 MCE banks [ 0.002494] LVT offset 0 assigned for vector 0xf9 [ 0.002498] process: using AMD E400 aware idle routine [ 0.002500] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 tlb_flushall_shift: 4 [ 0.002567] Freeing SMP alternatives: 24k freed [ 0.003259] ACPI: Core revision 20130328 [ 0.006908] ACPI: All ACPI Tables successfully acquired [ 0.008522] ftrace: allocating 24875 entries in 98 pages [ 0.018291] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028286] smpboot: CPU0: AMD Processor model unknown (fam: 10, model: 06, stepping: 02) [ 0.129813] Performance Events: AMD PMU driver. [ 0.129817] ... version: 0 [ 0.129818] ... bit width: 48 [ 0.129819] ... generic registers: 4 [ 0.129820] ... value mask: 0000ffffffffffff [ 0.129820] ... max period: 00007fffffffffff [ 0.129821] ... fixed-purpose events: 0 [ 0.129822] ... event mask: 000000000000000f [ 0.130863] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.130928] smpboot: Booting Node 0, Processors #1 [ 0.144054] Brought up 2 CPUs [ 0.144056] smpboot: Total of 2 processors activated (11999.28 BogoMIPS) [ 0.144694] devtmpfs: initialized [ 0.144921] PM: Registering ACPI NVS region [mem 0xcfef0000-0xcfef2fff] (12288 bytes) [ 0.145782] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.145842] RTC time: 0:04:15, date: 07/30/13 [ 0.145897] NET: Registered protocol family 16 [ 0.146006] node 0 link 0: io port [9000, ffff] [ 0.146008] TOM: 00000000d8000000 aka 3456M [ 0.146010] Fam 10h mmconf [mem 0xf0000000-0xf00fffff] [ 0.146012] node 0 link 0: mmio [a0000, bffff] [ 0.146014] node 0 link 0: mmio [d8000000, efffffff] [ 0.146015] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.146017] node 0 link 0: mmio [f0000000, f03fffff] ==> [f0100000, f03fffff] [ 0.146019] TOM2: 0000000128000000 aka 4736M [ 0.146020] bus: [bus 00-04] on node 0 link 0 [ 0.146022] bus: 00 [io 0x0000-0xffff] [ 0.146023] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.146024] bus: 00 [mem 0xd8000000-0xefffffff] [ 0.146025] bus: 00 [mem 0xf0400000-0xffffffff] [ 0.146026] bus: 00 [mem 0xf0100000-0xf03fffff] [ 0.146027] bus: 00 [mem 0x128000000-0xfcffffffff] [ 0.146097] ACPI: bus type PCI registered [ 0.146099] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.146150] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.146152] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.148098] PCI: Using configuration type 1 for base access [ 0.148822] bio: create slab at 0 [ 0.148922] ACPI: Added _OSI(Module Device) [ 0.148924] ACPI: Added _OSI(Processor Device) [ 0.148925] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148926] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150010] ACPI: EC: Look up EC in DSDT [ 0.154207] ACPI: Interpreter enabled [ 0.154213] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.154216] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.154226] ACPI: (supports S0 S3 S4 S5) [ 0.154227] ACPI: Using IOAPIC for interrupt routing [ 0.154245] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.154359] ACPI: No dock devices found. [ 0.163828] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04]) [ 0.164793] PCI host bridge to bus 0000:00 [ 0.164796] pci_bus 0000:00: root bus resource [bus 00-04] [ 0.164798] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.164800] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.164802] pci_bus 0000:00: root bus resource [io 0x9000-0xffff] [ 0.164803] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.164805] pci_bus 0000:00: root bus resource [io 0x1c00-0x1c80] [ 0.164806] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff] [ 0.164808] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.164810] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xefffffff] [ 0.164811] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff] [ 0.164843] pci 0000:00:00.0: [10de:0754] type 00 class 0x050000 [ 0.165129] pci 0000:00:01.0: [10de:075c] type 00 class 0x060100 [ 0.165207] pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500 [ 0.165217] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] [ 0.165232] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.165237] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f] [ 0.165265] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.165324] pci 0000:00:01.2: [10de:0751] type 00 class 0x050000 [ 0.165447] pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000 [ 0.165464] pci 0000:00:01.3: reg 10: [mem 0xfdf80000-0xfdffffff] [ 0.165652] pci 0000:00:01.4: [10de:0568] type 00 class 0x050000 [ 0.165757] pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310 [ 0.165765] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] [ 0.165800] pci 0000:00:02.0: supports D1 D2 [ 0.165801] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165834] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.165859] pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320 [ 0.165868] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] [ 0.165908] pci 0000:00:02.1: supports D1 D2 [ 0.165909] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165953] pci 0000:00:02.1: System wakeup disabled by ACPI [ 0.165985] pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310 [ 0.165993] pci 0000:00:04.0: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.166026] pci 0000:00:04.0: supports D1 D2 [ 0.166029] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166061] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.166086] pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320 [ 0.166095] pci 0000:00:04.1: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.166135] pci 0000:00:04.1: supports D1 D2 [ 0.166136] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166178] pci 0000:00:04.1: System wakeup disabled by ACPI [ 0.166210] pci 0000:00:06.0: [10de:0759] type 00 class 0x01018a [ 0.166230] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] [ 0.166280] pci 0000:00:07.0: [10de:0774] type 00 class 0x040300 [ 0.166290] pci 0000:00:07.0: reg 10: [mem 0xfe020000-0xfe023fff] [ 0.166330] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.166365] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.166389] pci 0000:00:08.0: [10de:075a] type 01 class 0x060401 [ 0.166426] pci 0000:00:08.0: System wakeup disabled by ACPI [ 0.166450] pci 0000:00:09.0: [10de:0ad0] type 00 class 0x010185 [ 0.166458] pci 0000:00:09.0: reg 10: [io 0x09f0-0x09f7] [ 0.166462] pci 0000:00:09.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.166465] pci 0000:00:09.0: reg 18: [io 0x0970-0x0977] [ 0.166469] pci 0000:00:09.0: reg 1c: [io 0x0b70-0x0b73] [ 0.166472] pci 0000:00:09.0: reg 20: [io 0xdc00-0xdc0f] [ 0.166476] pci 0000:00:09.0: reg 24: [mem 0xfe026000-0xfe027fff] [ 0.166524] pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000 [ 0.166533] pci 0000:00:0a.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.166537] pci 0000:00:0a.0: reg 14: [io 0xd800-0xd807] [ 0.166541] pci 0000:00:0a.0: reg 18: [mem 0xfe02a000-0xfe02a0ff] [ 0.166545] pci 0000:00:0a.0: reg 1c: [mem 0xfe029000-0xfe02900f] [ 0.166573] pci 0000:00:0a.0: supports D1 D2 [ 0.166574] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166613] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.166639] pci 0000:00:0b.0: [10de:0569] type 01 class 0x060400 [ 0.166662] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166743] pci 0000:00:10.0: [10de:0778] type 01 class 0x060400 [ 0.166965] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167025] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.167091] pci 0000:00:12.0: [10de:075b] type 01 class 0x060400 [ 0.167310] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167372] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.167400] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.167443] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.167473] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.167512] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.167553] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.167690] pci 0000:01:08.0: [104c:8023] type 00 class 0x0c0010 [ 0.167703] pci 0000:01:08.0: reg 10: [mem 0xfdeff000-0xfdeff7ff] [ 0.167710] pci 0000:01:08.0: reg 14: [mem 0xfdef8000-0xfdefbfff] [ 0.167758] pci 0000:01:08.0: supports D1 D2 [ 0.167759] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot [ 0.167806] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode) [ 0.167809] pci 0000:00:08.0: bridge window [io 0xc000-0xcfff] [ 0.167811] pci 0000:00:08.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.167814] pci 0000:00:08.0: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.167816] pci 0000:00:08.0: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.167817] pci 0000:00:08.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.167819] pci 0000:00:08.0: bridge window [io 0x9000-0xffff] (subtractive decode) [ 0.167820] pci 0000:00:08.0: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 0.167822] pci 0000:00:08.0: bridge window [io 0x1c00-0x1c80] (subtractive decode) [ 0.167823] pci 0000:00:08.0: bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode) [ 0.167825] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.167827] pci 0000:00:08.0: bridge window [mem 0xd8000000-0xefffffff] (subtractive decode) [ 0.167828] pci 0000:00:08.0: bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode) [ 0.167858] pci 0000:02:00.0: [10de:0849] type 00 class 0x030000 [ 0.167864] pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.167869] pci 0000:02:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.167874] pci 0000:02:00.0: reg 1c: [mem 0xe6000000-0xe7ffffff 64bit pref] [ 0.167878] pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f] [ 0.167882] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.167928] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.167931] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] [ 0.167933] pci 0000:00:0b.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.167936] pci 0000:00:0b.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref] [ 0.168094] pci 0000:00:10.0: PCI bridge to [bus 03] [ 0.168106] pci 0000:00:10.0: bridge window [io 0xa000-0xafff] [ 0.168113] pci 0000:00:10.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.168126] pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.168283] pci 0000:00:12.0: PCI bridge to [bus 04] [ 0.168295] pci 0000:00:12.0: bridge window [io 0x9000-0x9fff] [ 0.168302] pci 0000:00:12.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.168315] pci 0000:00:12.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.168390] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.168500] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c [ 0.168501] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.169005] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169046] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) [ 0.169085] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169123] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169161] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169198] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169237] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169274] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169313] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169352] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169390] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169429] ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169466] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169504] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169542] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169579] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169618] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169656] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169694] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169732] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169772] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169810] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169848] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169886] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169924] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.169962] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170001] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170042] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170080] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170118] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170156] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170194] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170233] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170271] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170309] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170348] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170386] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170425] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 0.170463] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.170501] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.170539] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 *10 11 14 15) [ 0.170578] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 *11 14 15) [ 0.170615] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.170652] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.170689] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15) [ 0.170727] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.170767] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.170805] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.170868] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.170927] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.170985] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.171045] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.171104] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled. [ 0.171162] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled. [ 0.171223] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled. [ 0.171282] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled. [ 0.171341] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled. [ 0.171400] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled. [ 0.171459] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled. [ 0.171518] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled. [ 0.171579] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled. [ 0.171640] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled. [ 0.171700] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled. [ 0.171759] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled. [ 0.171820] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled. [ 0.171883] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled. [ 0.171943] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled. [ 0.172002] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled. [ 0.172064] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled. [ 0.172122] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled. [ 0.172182] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled. [ 0.172243] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled. [ 0.172303] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled. [ 0.172362] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled. [ 0.172421] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled. [ 0.172481] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled. [ 0.172539] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled. [ 0.172600] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled. [ 0.172661] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled. [ 0.172721] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled. [ 0.172782] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled. [ 0.172842] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled. [ 0.172902] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled. [ 0.172962] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled. [ 0.173022] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.173081] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 0.173141] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 [ 0.173200] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 [ 0.173261] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 [ 0.173321] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.173380] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 [ 0.173438] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.173498] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.173557] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.173617] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.173676] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.173794] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.173800] acpi root: \_SB_.PCI0 notify handler is installed [ 0.173859] Found 1 acpi root devices [ 0.174015] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.174017] vgaarb: loaded [ 0.174017] vgaarb: bridge control possible 0000:02:00.0 [ 0.174091] SCSI subsystem initialized [ 0.174094] ACPI: bus type ATA registered [ 0.174123] libata version 3.00 loaded. [ 0.174137] ACPI: bus type USB registered [ 0.174155] usbcore: registered new interface driver usbfs [ 0.174163] usbcore: registered new interface driver hub [ 0.174188] usbcore: registered new device driver usb [ 0.174257] PCI: Using ACPI for IRQ routing [ 0.175740] PCI: pci_cache_line_size set to 64 bytes [ 0.175794] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.175796] e820: reserve RAM buffer [mem 0xcfef0000-0xcfffffff] [ 0.175872] NetLabel: Initializing [ 0.175873] NetLabel: domain hash size = 128 [ 0.175874] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.175883] NetLabel: unlabeled traffic allowed by default [ 0.175932] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.175937] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.175940] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.178021] Switching to clocksource hpet [ 0.182492] pnp: PnP ACPI init [ 0.182507] ACPI: bus type PNP registered [ 0.182699] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.182702] system 00:00: [io 0x1080-0x10ff] has been reserved [ 0.182703] system 00:00: [io 0x1400-0x147f] has been reserved [ 0.182705] system 00:00: [io 0x1480-0x14ff] has been reserved [ 0.182707] system 00:00: [io 0x1800-0x187f] has been reserved [ 0.182708] system 00:00: [io 0x1880-0x18ff] has been reserved [ 0.182711] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved [ 0.182713] system 00:00: [mem 0xd0000000-0xd7ffffff] has been reserved [ 0.182716] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182795] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.182797] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.182799] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.182801] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182809] pnp 00:02: [dma 4] [ 0.182824] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.182888] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.182922] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.182939] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.182963] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.183104] pnp 00:07: [dma 2] [ 0.183127] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.183341] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.184594] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.184596] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.184671] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.184673] system 00:0a: [mem 0xfeff0000-0xfeff00ff] has been reserved [ 0.184675] system 00:0a: [mem 0xcfef0000-0xcfefffff] could not be reserved [ 0.184677] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved [ 0.184678] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.184680] system 00:0a: [mem 0x00100000-0xcfeeffff] could not be reserved [ 0.184682] system 00:0a: [mem 0xd0000000-0xd7ffffff] has been reserved [ 0.184684] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.184685] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.184689] system 00:0a: [mem 0xfefff000-0xfeffffff] has been reserved [ 0.184691] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.184693] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.184695] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.184697] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.184704] pnp: PnP ACPI: found 11 devices [ 0.184705] ACPI: bus type PNP unregistered [ 0.191134] pci 0000:00:08.0: PCI bridge to [bus 01] [ 0.191137] pci 0000:00:08.0: bridge window [io 0xc000-0xcfff] [ 0.191140] pci 0000:00:08.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.191143] pci 0000:00:08.0: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.191149] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref] [ 0.191151] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.191152] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] [ 0.191155] pci 0000:00:0b.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.191157] pci 0000:00:0b.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref] [ 0.191160] pci 0000:00:10.0: PCI bridge to [bus 03] [ 0.191164] pci 0000:00:10.0: bridge window [io 0xa000-0xafff] [ 0.191173] pci 0000:00:10.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.191180] pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.191191] pci 0000:00:12.0: PCI bridge to [bus 04] [ 0.191195] pci 0000:00:12.0: bridge window [io 0x9000-0x9fff] [ 0.191204] pci 0000:00:12.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.191211] pci 0000:00:12.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.191227] pci 0000:00:08.0: setting latency timer to 64 [ 0.191230] pci 0000:00:0b.0: setting latency timer to 64 [ 0.191418] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16 [ 0.191586] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16 [ 0.191592] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.191594] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.191595] pci_bus 0000:00: resource 6 [io 0x9000-0xffff] [ 0.191597] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df] [ 0.191598] pci_bus 0000:00: resource 8 [io 0x1c00-0x1c80] [ 0.191600] pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff] [ 0.191601] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff] [ 0.191603] pci_bus 0000:00: resource 11 [mem 0xd8000000-0xefffffff] [ 0.191604] pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff] [ 0.191606] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.191608] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.191609] pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff pref] [ 0.191611] pci_bus 0000:01: resource 4 [io 0x0000-0x03af] [ 0.191612] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7] [ 0.191614] pci_bus 0000:01: resource 6 [io 0x9000-0xffff] [ 0.191615] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df] [ 0.191617] pci_bus 0000:01: resource 8 [io 0x1c00-0x1c80] [ 0.191618] pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff] [ 0.191620] pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff] [ 0.191621] pci_bus 0000:01: resource 11 [mem 0xd8000000-0xefffffff] [ 0.191623] pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff] [ 0.191625] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.191626] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.191628] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref] [ 0.191630] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 0.191631] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.191633] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.191634] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff] [ 0.191636] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.191638] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.191672] NET: Registered protocol family 2 [ 0.191824] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.191993] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.192138] TCP: Hash tables configured (established 32768 bind 32768) [ 0.192184] TCP: reno registered [ 0.192192] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.192218] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.192314] NET: Registered protocol family 1 [ 0.192593] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 0.254199] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22 [ 0.254436] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 21 [ 0.316133] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20 [ 0.316317] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.316410] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.316508] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.316611] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.316713] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.316836] pci 0000:02:00.0: Boot video device [ 0.316838] PCI: CLS 64 bytes, default 64 [ 0.316878] Unpacking initramfs... [ 0.450575] Freeing initrd memory: 9440k freed [ 0.453623] PCI-DMA: Disabling AGP. [ 0.453694] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.453695] PCI-DMA: using GART IOMMU. [ 0.453698] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.457144] LVT offset 1 assigned for vector 0x400 [ 0.457153] IBS: LVT offset 1 assigned [ 0.457177] perf: AMD IBS detected (0x0000001f) [ 0.457483] Initialise system trusted keyring [ 0.457520] audit: initializing netlink socket (disabled) [ 0.457528] type=2000 audit(1375142655.353:1): initialized [ 0.475429] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.476677] VFS: Disk quotas dquot_6.5.2 [ 0.476715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.477034] msgmni has been set to 7647 [ 0.477085] SELinux: Registering netfilter hooks [ 0.477507] alg: No test for stdrng (krng) [ 0.477514] NET: Registered protocol family 38 [ 0.477516] Key type asymmetric registered [ 0.477518] Asymmetric key parser 'x509' registered [ 0.477519] Asymmetric key parser 'pefile' registered [ 0.477548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.477571] io scheduler noop registered [ 0.477573] io scheduler deadline registered [ 0.477595] io scheduler cfq registered (default) [ 0.477935] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.477946] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.478059] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.478062] ACPI: Power Button [PWRB] [ 0.478103] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.478105] ACPI: Power Button [PWRF] [ 0.478141] ACPI: Fan [FAN] (on) [ 0.481241] ACPI: [Package] has zero elements (ffff880121f59f00) [ 0.481275] ACPI: Invalid passive threshold [ 0.481417] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.481418] ACPI: Thermal Zone [THRM] (40 C) [ 0.481439] GHES: HEST is not enabled! [ 0.481505] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.481960] Non-volatile memory driver v1.3 [ 0.481961] Linux agpgart interface v0.103 [ 0.482591] loop: module loaded [ 0.482664] ahci 0000:00:09.0: version 3.0 [ 0.482902] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.482935] ahci 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.482943] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 0.482987] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 0.482989] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh [ 0.482992] ahci 0000:00:09.0: setting latency timer to 64 [ 0.483555] scsi0 : ahci [ 0.483624] scsi1 : ahci [ 0.483672] scsi2 : ahci [ 0.483724] scsi3 : ahci [ 0.483784] scsi4 : ahci [ 0.483826] scsi5 : ahci [ 0.483871] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 40 [ 0.483873] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 40 [ 0.483874] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 40 [ 0.483876] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 40 [ 0.483877] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 40 [ 0.483878] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 40 [ 0.483955] libphy: Fixed MDIO Bus: probed [ 0.484011] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.484012] ehci-pci: EHCI PCI platform driver [ 0.484148] ehci-pci 0000:00:02.1: setting latency timer to 64 [ 0.484159] ehci-pci 0000:00:02.1: EHCI Host Controller [ 0.484207] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.484215] ehci-pci 0000:00:02.1: debug port 1 [ 0.484238] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 0.484256] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 0.489736] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.489754] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.489755] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.489758] usb usb1: Product: EHCI Host Controller [ 0.489759] usb usb1: Manufacturer: Linux 3.10.3-300.fc19.x86_64 ehci_hcd [ 0.489761] usb usb1: SerialNumber: 0000:00:02.1 [ 0.489839] hub 1-0:1.0: USB hub found [ 0.489843] hub 1-0:1.0: 6 ports detected [ 0.490018] ehci-pci 0000:00:04.1: setting latency timer to 64 [ 0.490023] ehci-pci 0000:00:04.1: EHCI Host Controller [ 0.490053] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.490059] ehci-pci 0000:00:04.1: debug port 1 [ 0.490073] ehci-pci 0000:00:04.1: cache line size of 64 is not supported [ 0.490088] ehci-pci 0000:00:04.1: irq 20, io mem 0xfe02c000 [ 0.495738] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.495746] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.495748] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.495749] usb usb2: Product: EHCI Host Controller [ 0.495751] usb usb2: Manufacturer: Linux 3.10.3-300.fc19.x86_64 ehci_hcd [ 0.495752] usb usb2: SerialNumber: 0000:00:04.1 [ 0.495818] hub 2-0:1.0: USB hub found [ 0.495821] hub 2-0:1.0: 6 ports detected [ 0.495903] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.495996] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.495998] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.496035] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.496056] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.548692] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.548693] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.548695] usb usb3: Product: OHCI Host Controller [ 0.548696] usb usb3: Manufacturer: Linux 3.10.3-300.fc19.x86_64 ohci_hcd [ 0.548697] usb usb3: SerialNumber: 0000:00:02.0 [ 0.548763] hub 3-0:1.0: USB hub found [ 0.548766] hub 3-0:1.0: 6 ports detected [ 0.548936] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.548938] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.548967] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.548987] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfe02d000 [ 0.601637] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.601639] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.601640] usb usb4: Product: OHCI Host Controller [ 0.601641] usb usb4: Manufacturer: Linux 3.10.3-300.fc19.x86_64 ohci_hcd [ 0.601643] usb usb4: SerialNumber: 0000:00:04.0 [ 0.601705] hub 4-0:1.0: USB hub found [ 0.601709] hub 4-0:1.0: 6 ports detected [ 0.601789] uhci_hcd: USB Universal Host Controller Interface driver [ 0.601831] usbcore: registered new interface driver usbserial [ 0.601841] usbcore: registered new interface driver usbserial_generic [ 0.601846] usbserial: USB Serial support registered for generic [ 0.601871] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.602286] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.602290] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.602363] mousedev: PS/2 mouse device common for all mice [ 0.602492] rtc_cmos 00:04: RTC can wake from S4 [ 0.602746] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.602800] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.602854] device-mapper: uevent: version 1.0.3 [ 0.602903] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 0.602932] cpuidle: using governor ladder [ 0.602933] cpuidle: using governor menu [ 0.603102] hidraw: raw HID events driver (C) Jiri Kosina [ 0.603177] usbcore: registered new interface driver usbhid [ 0.603178] usbhid: USB HID core driver [ 0.603197] drop_monitor: Initializing network drop monitor service [ 0.603266] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.603293] TCP: cubic registered [ 0.603295] Initializing XFRM netlink socket [ 0.603370] NET: Registered protocol family 10 [ 0.603529] mip6: Mobile IPv6 [ 0.603532] NET: Registered protocol family 17 [ 0.603760] PM: Hibernation image not present or could not be loaded. [ 0.603761] Loading compiled-in X.509 certificates [ 0.604681] Loaded X.509 cert 'Fedora kernel signing key: d774685a27fad42358886b09ce4a68f1225cdd7f' [ 0.604689] registered taskstats version 1 [ 0.605212] Magic number: 5:769:52 [ 0.605343] rtc_cmos 00:04: setting system clock to 2013-07-30 00:04:15 UTC (1375142655) [ 0.788455] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.788469] ata4: SATA link down (SStatus 0 SControl 300) [ 0.788482] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.788491] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.788502] ata6: SATA link down (SStatus 0 SControl 300) [ 0.788511] ata5: SATA link down (SStatus 0 SControl 300) [ 0.788676] ata1.00: ATAPI: HP DVD Writer 1270d, GH22, max UDMA/100 [ 0.789106] ata2.00: ATA-8: WDC WD3200AAKS-00L9A0, 01.03E01, max UDMA/133 [ 0.789108] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.789310] ata1.00: configured for UDMA/100 [ 0.790785] ata2.00: configured for UDMA/133 [ 0.790929] scsi 0:0:0:0: CD-ROM HP DVD Writer 1270d GH22 PQ: 0 ANSI: 5 [ 0.794043] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.794044] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.794127] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.794177] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.794292] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5 [ 0.794383] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.794398] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.794420] sd 1:0:0:0: [sda] Write Protect is off [ 0.794422] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.794447] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.804320] ata3.00: ATA-6: SAMSUNG HD502HI, 1AG01118, max UDMA/133 [ 0.804322] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 0.805069] sda: sda1 sda2 [ 0.805340] sd 1:0:0:0: [sda] Attached SCSI disk [ 0.821819] ata3.00: configured for UDMA/133 [ 0.821898] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1AG0 PQ: 0 ANSI: 5 [ 0.821973] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.821980] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 0.822013] sd 2:0:0:0: [sdb] Write Protect is off [ 0.822015] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.822049] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.823077] sdb: sdb1 [ 0.823288] sd 2:0:0:0: [sdb] Attached SCSI disk [ 0.823983] Freeing unused kernel memory: 1412k freed [ 0.824342] Write protecting the kernel read-only data: 12288k [ 0.827672] Freeing unused kernel memory: 1696k freed [ 0.830477] Freeing unused kernel memory: 1264k freed [ 0.833834] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 0.833912] systemd[1]: Running in initial RAM disk. [ 0.834007] systemd[1]: Set hostname to . [ 0.838810] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device... [ 0.838824] systemd[1]: Expecting device dev-disk-by\x2duuid-068cd466\x2df13e\x2d4d8f\x2d9044\x2d4c164b211190.device... [ 0.838833] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device... [ 0.838842] systemd[1]: Starting Timers. [ 0.838852] systemd[1]: Reached target Timers. [ 0.838905] systemd[1]: Starting udev Kernel Socket. [ 0.838936] systemd[1]: Listening on udev Kernel Socket. [ 0.838973] systemd[1]: Starting udev Control Socket. [ 0.839002] systemd[1]: Listening on udev Control Socket. [ 0.839011] systemd[1]: Starting Journal Socket. [ 0.839047] systemd[1]: Listening on Journal Socket. [ 0.839181] systemd[1]: Starting dracut cmdline hook... [ 0.839757] systemd[1]: Started Load Kernel Modules. [ 0.839772] systemd[1]: Starting Sockets. [ 0.839782] systemd[1]: Reached target Sockets. [ 0.839792] systemd[1]: Starting Journal Service... [ 0.840816] systemd[1]: Started Journal Service. [ 0.851465] systemd[1]: Starting Swap. [ 0.851482] systemd[1]: Reached target Swap. [ 0.851496] systemd[1]: Starting Local File Systems. [ 0.851505] systemd[1]: Reached target Local File Systems. [ 0.947697] systemd-udevd[151]: starting version 204 [ 0.990342] wmi: Mapper loaded [ 0.993124] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 0.993259] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 0.993295] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input2 [ 0.997666] pata_amd 0000:00:06.0: version 0.4.1 [ 0.997698] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.997940] scsi6 : pata_amd [ 0.998121] scsi7 : pata_amd [ 0.998256] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.998258] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.004408] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 1.004433] firewire_ohci 0000:01:08.0: setting latency timer to 64 [ 1.013756] [drm] Initialized drm 1.1.0 20060810 [ 1.035000] MXM: GUID detected in BIOS [ 1.035106] nouveau 0000:02:00.0: setting latency timer to 64 [ 1.035358] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22 [ 1.035548] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0aa480a2 [ 1.035550] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP77/MCP78 (NVAA) [ 1.035552] nouveau [ DEVICE][0000:02:00.0] Family : NV50 [ 1.036107] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image... [ 1.073991] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid [ 1.073993] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN [ 1.074117] nouveau [ VBIOS][0000:02:00.0] BIT signature found [ 1.074119] nouveau [ VBIOS][0000:02:00.0] version 62.77.15.00.10 [ 1.094262] firewire_ohci 0000:01:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.094282] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory [ 1.094283] nouveau [ PFB][0000:02:00.0] RAM size: 128 MiB [ 1.094285] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags [ 1.160570] usb 4-4: new low-speed USB device number 2 using ohci_hcd [ 1.160614] ata8: port disabled--ignoring [ 1.352911] usb 4-4: New USB device found, idVendor=413c, idProduct=2107 [ 1.352915] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.352917] usb 4-4: Product: Dell USB Entry Keyboard [ 1.352919] usb 4-4: Manufacturer: DELL [ 1.363077] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input3 [ 1.363131] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:04.0-4/input0 [ 1.527771] nouveau [ PTHERM][0000:02:00.0] FAN control: none / external [ 1.527782] nouveau [ PTHERM][0000:02:00.0] fan management: disabled [ 1.527785] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes [ 1.527893] [TTM] Zone kernel: Available graphics memory: 1960028 kiB [ 1.527894] [TTM] Initializing pool allocator [ 1.527898] [TTM] Initializing DMA pool allocator [ 1.528193] nouveau [ DRM] VRAM: 128 MiB [ 1.528198] nouveau [ DRM] GART: 512 MiB [ 1.528202] nouveau [ DRM] TMDS table version 2.0 [ 1.528204] nouveau [ DRM] DCB version 4.0 [ 1.528206] nouveau [ DRM] DCB outp 00: 01000300 00000028 [ 1.528208] nouveau [ DRM] DCB outp 01: 01011332 00020030 [ 1.528211] nouveau [ DRM] DCB conn 00: 00000100 [ 1.528213] nouveau [ DRM] DCB conn 01: 00001261 [ 1.534334] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.534335] [drm] No driver support for vblank timestamp query. [ 1.543675] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00020002 FAULT at 0x100220 [ 1.553047] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100224 [ 1.562415] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100228 [ 1.655604] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e0 [ 1.664926] nouveau [ DRM] 1 available performance level(s) [ 1.664928] nouveau [ DRM] 0: core 500MHz shader 1200MHz voltage 1200mV fanspeed 100% [ 1.664929] nouveau [ DRM] c: [ 1.672768] nouveau [ DRM] MM: using M2MF for buffer copies [ 1.702143] nouveau [ DRM] allocated 1600x900 fb: 0x50000, bo ffff88011f51b400 [ 1.702159] tsc: Refined TSC clocksource calibration: 3000.000 MHz [ 1.702163] Switching to clocksource tsc [ 1.702204] fbcon: nouveaufb (fb0) is primary device [ 1.715536] usb 3-4: new low-speed USB device number 2 using ohci_hcd [ 1.776673] Console: switching to colour frame buffer device 200x56 [ 1.778676] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device [ 1.778677] nouveau 0000:02:00.0: registered panic notifier [ 1.778682] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0 [ 1.836120] bio: create slab at 1 [ 1.912356] usb 3-4: New USB device found, idVendor=045e, idProduct=00e1 [ 1.912360] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.912362] usb 3-4: Product: Microsoft Wireless Optical Mouse® 1.00 [ 1.912363] usb 3-4: Manufacturer: Microsoft [ 1.929718] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/input/input4 [ 1.929811] hid-generic 0003:045E:00E1.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:02.0-4/input0 [ 2.028300] firewire_core 0000:01:08.0: created device fw0: GUID 000000301b472357, S400 [ 2.166489] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 2.353584] systemd-journald[62]: Received SIGTERM [ 3.080889] type=1404 audit(1375142657.976:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 3.432584] SELinux: 2048 avtab hash slots, 94389 rules. [ 3.443623] SELinux: 2048 avtab hash slots, 94389 rules. [ 3.867831] SELinux: 8 users, 82 roles, 4514 types, 254 bools, 1 sens, 1024 cats [ 3.867835] SELinux: 83 classes, 94389 rules [ 3.871908] SELinux: Completing initialization. [ 3.871912] SELinux: Setting up existing superblocks. [ 3.871922] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 3.871926] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 3.871934] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 3.871939] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 3.871945] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.871964] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 3.872519] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 3.872523] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 3.873288] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 3.873295] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 3.873297] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 3.873313] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 3.873317] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 3.873323] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 3.873333] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 3.873704] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 3.873707] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.873716] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.873768] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.873791] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873799] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts [ 3.873801] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873806] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873827] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873833] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873837] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873840] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873843] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873850] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.873859] SELinux: initialized (dev dm-1, type ext4), uses xattr [ 3.889754] type=1403 audit(1375142658.786:3): policy loaded auid=4294967295 ses=4294967295 [ 3.893633] systemd[1]: Successfully loaded SELinux policy in 832.990ms. [ 4.064386] systemd[1]: Relabelled /dev and /run in 21.159ms. [ 4.470225] LVM: Logical Volume autoactivation enabled. [ 4.470230] LVM: Activation generator successfully completed. [ 5.414342] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 5.642418] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 5.971393] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.238857] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts [ 7.003739] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 7.425557] systemd-udevd[336]: starting version 204 [ 8.247354] parport_pc 00:08: reported by Plug and Play ACPI [ 8.247401] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.852481] microcode: CPU0: patch_level=0x00000000 [ 8.919643] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 8.919871] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 8.919878] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 9.391558] microcode: CPU0: new patch_level=0x010000c7 [ 9.391569] microcode: CPU1: patch_level=0x00000000 [ 9.391577] microcode: CPU1: new patch_level=0x010000c7 [ 9.391639] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 9.435854] ppdev: user-space parallel port driver [ 9.441470] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 19, addr 00:30:1b:81:7d:a2 [ 9.441474] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 9.441534] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.458065] systemd-udevd[351]: renamed network interface eth0 to em1 [ 9.539712] i2c i2c-7: nForce2 SMBus adapter at 0x1c00 [ 9.539717] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \SM01 1 (20130328/utaddress-251) [ 9.539721] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \SM00 2 (20130328/utaddress-251) [ 9.539724] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.649507] MCE: In-kernel MCE decoding enabled. [ 9.662213] EDAC MC: Ver: 3.0.0 [ 9.668190] AMD64 EDAC driver v3.4.0 [ 9.668220] EDAC amd64: DRAM ECC disabled. [ 9.668227] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 10.214133] kvm: Nested Virtualization enabled [ 10.214138] kvm: Nested Paging enabled [ 10.906424] acpi-cpufreq: overriding BIOS provided _PSD data [ 11.164366] Adding 3948540k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:3948540k FS [ 11.278742] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 11.278756] hda_intel: Disabling MSI [ 11.278809] snd_hda_intel 0000:00:07.0: setting latency timer to 64 [ 11.278817] ALSA sound/pci/hda/hda_intel.c:3538 0000:00:07.0: Disabling 64bit DMA [ 11.283194] ALSA sound/pci/hda/hda_intel.c:1724 0000:00:07.0: Enable delay in RIRB handling [ 11.791702] ALSA sound/pci/hda/patch_realtek.c:414 SKU: Nid=0x1d sku_cfg=0x4005a303 [ 11.791711] ALSA sound/pci/hda/patch_realtek.c:416 SKU: port_connectivity=0x1 [ 11.791716] ALSA sound/pci/hda/patch_realtek.c:417 SKU: enable_pcbeep=0x0 [ 11.791721] ALSA sound/pci/hda/patch_realtek.c:418 SKU: check_sum=0x00000005 [ 11.791725] ALSA sound/pci/hda/patch_realtek.c:419 SKU: customization=0x000000a3 [ 11.791729] ALSA sound/pci/hda/patch_realtek.c:420 SKU: external_amp=0x0 [ 11.791733] ALSA sound/pci/hda/patch_realtek.c:421 SKU: platform_type=0x0 [ 11.791737] ALSA sound/pci/hda/patch_realtek.c:422 SKU: swap=0x1 [ 11.791741] ALSA sound/pci/hda/patch_realtek.c:423 SKU: override=0x1 [ 11.821669] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 11.821677] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.821683] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 11.821687] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 11.821691] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0 [ 11.821695] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 11.821700] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x19 [ 11.821705] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a [ 11.821710] ALSA sound/pci/hda/hda_auto_parser.c:410 Aux=0x18 [ 11.821714] ALSA sound/pci/hda/hda_auto_parser.c:413 dig-in=0x1f [ 11.821720] ALSA sound/pci/hda/patch_realtek.c:486 realtek: No valid SSID, checking pincfg 0x4005a303 for NID 0x1d [ 11.821725] ALSA sound/pci/hda/patch_realtek.c:502 realtek: Enabling init ASM_ID=0xa303 CODEC_ID=10ec0888 [ 12.828854] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:07.0/sound/card0/input5 [ 12.829232] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input6 [ 12.829449] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input7 [ 12.829642] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input8 [ 12.829836] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input9 [ 12.830010] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input10 [ 12.830182] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input11 [ 12.830364] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input12 [ 16.819191] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.828959] SELinux: initialized (dev sda1, type ext4), uses xattr [ 17.337873] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 17.337894] SELinux: initialized (dev dm-2, type ext4), uses xattr [ 17.589042] type=1305 audit(1375142672.499:4): audit_pid=432 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 17.627513] systemd[1]: Unit rngd.service entered failed state. [ 18.047368] systemd-logind[468]: Watching system buttons on /dev/input/event1 (Power Button) [ 18.047658] systemd-logind[468]: Watching system buttons on /dev/input/event2 (Video Bus) [ 18.047874] systemd-logind[468]: Watching system buttons on /dev/input/event0 (Power Button) [ 20.390783] nouveau E[ PGRAPH][0000:02:00.0] TRAP_MP_EXEC - TP 0 MP 0: (unknown enum 0x00000002) at 000000 warp 8, opcode 00000000 7d7788cb [ 20.390803] nouveau E[ PGRAPH][0000:02:00.0] TRAP [ 20.390816] nouveau E[ PGRAPH][0000:02:00.0] ch 1 [0x0007cb0000 DRM] subc 3 class 0x502d mthd 0x0860 data 0xfe00ccc6 [ 20.435838] nouveau E[ PGRAPH][0000:02:00.0] TRAP_MP_EXEC - TP 0: No MPs claiming errors? [ 20.435847] nouveau E[ PGRAPH][0000:02:00.0] TRAP [ 20.435861] nouveau E[ PGRAPH][0000:02:00.0] ch 3 [0x0007ada000 X[504]] subc 3 class 0x8397 mthd 0x15e4 data 0x00000001 [ 26.280306] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 26.408848] Ebtables v2.0 registered [ 27.033913] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 27.236607] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [ 27.239192] forcedeth 0000:00:0a.0 em1: MSI enabled [ 28.007912] Bluetooth: Core ver 2.16 [ 28.008049] NET: Registered protocol family 31 [ 28.008052] Bluetooth: HCI device and connection manager initialized [ 28.008065] Bluetooth: HCI socket layer initialized [ 28.008068] Bluetooth: L2CAP socket layer initialized [ 28.008075] Bluetooth: SCO socket layer initialized [ 28.117822] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.117831] Bluetooth: BNEP filters: protocol multicast [ 28.117851] Bluetooth: BNEP socket layer initialized [ 37.191588] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 55.433463] Bluetooth: RFCOMM TTY layer initialized [ 55.433492] Bluetooth: RFCOMM socket layer initialized [ 55.433497] Bluetooth: RFCOMM ver 1.11 [ 92.880274] nouveau E[ DRM] GPU lockup - switching to software fbcon [ 96.248611] nouveau E[ X[504]] failed to idle channel 0xcccc0001 [X[504]] [ 99.018983] nouveau E[ X[504]] failed to idle channel 0xcccc0001 [X[504]] [ 101.018403] nouveau E[ PFIFO][0000:02:00.0] channel 3 [X[504]] unload timeout [ 103.785998] nouveau E[ X[504]] failed to idle channel 0xcccc0000 [X[504]] [ 106.553615] nouveau E[ X[504]] failed to idle channel 0xcccc0000 [X[504]] [ 108.552746] nouveau E[ PFIFO][0000:02:00.0] channel 2 [X[504]] unload timeout ----------------------------------------------------------------------------- Xorg.0.log.old (from initial crash): [ 18.017] X.Org X Server 1.14.2 Release Date: 2013-06-25 [ 18.017] X Protocol Version 11, Revision 0 [ 18.017] Build Operating System: 2.6.32-358.14.1.el6.x86_64 [ 18.017] Current Operating System: Linux bigdog.hci.com 3.10.3-300.fc19.x86_64 #1 SMP Fri Jul 26 00:00:58 UTC 2013 x86_64 [ 18.018] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.3-300.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root quiet LANG=en_US.UTF-8 [ 18.018] Build Date: 22 July 2013 04:33:06AM [ 18.018] Build ID: xorg-x11-server 1.14.2-7.fc19 [ 18.018] Current version of pixman: 0.30.0 [ 18.018] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.018] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.019] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 29 17:04:33 2013 [ 18.038] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 18.038] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.056] (==) No Layout section. Using the first Screen section. [ 18.056] (==) No screen section available. Using defaults. [ 18.056] (**) |-->Screen "Default Screen Section" (0) [ 18.056] (**) | |-->Monitor "" [ 18.070] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 18.070] (==) Automatically adding devices [ 18.070] (==) Automatically enabling devices [ 18.070] (==) Automatically adding GPU devices [ 18.070] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 18.070] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 18.070] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.070] (II) Loader magic: 0x800d00 [ 18.070] (II) Module ABI versions: [ 18.070] X.Org ANSI C Emulation: 0.4 [ 18.070] X.Org Video Driver: 14.1 [ 18.070] X.Org XInput driver : 19.2 [ 18.070] X.Org Server Extension : 7.0 [ 18.071] (II) xfree86: Adding drm device (/dev/dri/card0) [ 18.075] (--) PCI:*(0:2:0:0) 10de:0849:10de:cb84 rev 162, Mem @ 0xfb000000/16777216, 0xd8000000/134217728, 0xe6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072 [ 18.075] Initializing built-in extension Generic Event Extension [ 18.075] Initializing built-in extension SHAPE [ 18.075] Initializing built-in extension MIT-SHM [ 18.075] Initializing built-in extension XInputExtension [ 18.075] Initializing built-in extension XTEST [ 18.075] Initializing built-in extension BIG-REQUESTS [ 18.075] Initializing built-in extension SYNC [ 18.075] Initializing built-in extension XKEYBOARD [ 18.075] Initializing built-in extension XC-MISC [ 18.075] Initializing built-in extension XINERAMA [ 18.075] Initializing built-in extension XFIXES [ 18.076] Initializing built-in extension RENDER [ 18.076] Initializing built-in extension RANDR [ 18.076] Initializing built-in extension COMPOSITE [ 18.076] Initializing built-in extension DAMAGE [ 18.076] Initializing built-in extension MIT-SCREEN-SAVER [ 18.076] Initializing built-in extension DOUBLE-BUFFER [ 18.076] Initializing built-in extension RECORD [ 18.076] Initializing built-in extension DPMS [ 18.076] Initializing built-in extension X-Resource [ 18.076] Initializing built-in extension XVideo [ 18.076] Initializing built-in extension XVideo-MotionCompensation [ 18.076] Initializing built-in extension SELinux [ 18.076] Initializing built-in extension XFree86-VidModeExtension [ 18.076] Initializing built-in extension XFree86-DGA [ 18.076] Initializing built-in extension XFree86-DRI [ 18.076] Initializing built-in extension DRI2 [ 18.076] (II) "glx" will be loaded by default. [ 18.076] (II) LoadModule: "dri2" [ 18.076] (II) Module "dri2" already built-in [ 18.076] (II) LoadModule: "glamoregl" [ 18.077] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [ 18.143] (II) Module glamoregl: vendor="X.Org Foundation" [ 18.143] compiled for 1.14.0, module version = 0.5.0 [ 18.143] ABI class: X.Org ANSI C Emulation, version 0.4 [ 18.143] (II) LoadModule: "glx" [ 18.144] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 18.163] (II) Module glx: vendor="X.Org Foundation" [ 18.163] compiled for 1.14.2, module version = 1.0.0 [ 18.163] ABI class: X.Org Server Extension, version 7.0 [ 18.163] (==) AIGLX enabled [ 18.163] Loading extension GLX [ 18.163] (==) Matched nouveau as autoconfigured driver 0 [ 18.163] (==) Matched nv as autoconfigured driver 1 [ 18.163] (==) Matched nouveau as autoconfigured driver 2 [ 18.163] (==) Matched nv as autoconfigured driver 3 [ 18.163] (==) Matched vesa as autoconfigured driver 4 [ 18.163] (==) Matched modesetting as autoconfigured driver 5 [ 18.163] (==) Matched fbdev as autoconfigured driver 6 [ 18.163] (==) Assigned the driver to the xf86ConfigLayout [ 18.163] (II) LoadModule: "nouveau" [ 18.181] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [ 18.182] (II) Module nouveau: vendor="X.Org Foundation" [ 18.182] compiled for 1.14.0, module version = 1.0.7 [ 18.182] Module class: X.Org Video Driver [ 18.182] ABI class: X.Org Video Driver, version 14.1 [ 18.182] (II) LoadModule: "nv" [ 18.183] (WW) Warning, couldn't open module nv [ 18.183] (II) UnloadModule: "nv" [ 18.183] (II) Unloading nv [ 18.183] (EE) Failed to load module "nv" (module does not exist, 0) [ 18.183] (II) LoadModule: "vesa" [ 18.183] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 18.183] (II) Module vesa: vendor="X.Org Foundation" [ 18.183] compiled for 1.14.0, module version = 2.3.2 [ 18.183] Module class: X.Org Video Driver [ 18.183] ABI class: X.Org Video Driver, version 14.1 [ 18.183] (II) LoadModule: "modesetting" [ 18.184] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [ 18.184] (II) Module modesetting: vendor="X.Org Foundation" [ 18.184] compiled for 1.14.1, module version = 0.6.0 [ 18.184] Module class: X.Org Video Driver [ 18.184] ABI class: X.Org Video Driver, version 14.1 [ 18.184] (II) LoadModule: "fbdev" [ 18.184] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 18.185] (II) Module fbdev: vendor="X.Org Foundation" [ 18.185] compiled for 1.14.0, module version = 0.4.3 [ 18.185] Module class: X.Org Video Driver [ 18.185] ABI class: X.Org Video Driver, version 14.1 [ 18.185] (II) NOUVEAU driver [ 18.185] (II) NOUVEAU driver for NVIDIA chipset families : [ 18.185] RIVA TNT (NV04) [ 18.185] RIVA TNT2 (NV05) [ 18.185] GeForce 256 (NV10) [ 18.185] GeForce 2 (NV11, NV15) [ 18.185] GeForce 4MX (NV17, NV18) [ 18.185] GeForce 3 (NV20) [ 18.185] GeForce 4Ti (NV25, NV28) [ 18.185] GeForce FX (NV3x) [ 18.185] GeForce 6 (NV4x) [ 18.186] GeForce 7 (G7x) [ 18.186] GeForce 8 (G8x) [ 18.186] GeForce GTX 200 (NVA0) [ 18.186] GeForce GTX 400 (NVC0) [ 18.186] (II) VESA: driver for VESA chipsets: vesa [ 18.186] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 18.186] (II) FBDEV: driver for framebuffer: fbdev [ 18.186] (++) using VT number 1 [ 18.192] (II) [drm] nouveau interface version: 1.1.1 [ 18.192] (WW) Falling back to old probe method for vesa [ 18.192] (WW) Falling back to old probe method for modesetting [ 18.192] (WW) Falling back to old probe method for fbdev [ 18.192] (II) Loading sub module "fbdevhw" [ 18.192] (II) LoadModule: "fbdevhw" [ 18.192] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 18.221] (II) Module fbdevhw: vendor="X.Org Foundation" [ 18.221] compiled for 1.14.2, module version = 0.0.2 [ 18.221] ABI class: X.Org Video Driver, version 14.1 [ 18.221] (II) Loading sub module "dri" [ 18.221] (II) LoadModule: "dri" [ 18.221] (II) Module "dri" already built-in [ 18.221] (II) NOUVEAU(0): Loaded DRI module [ 18.222] (--) NOUVEAU(0): Chipset: "NVIDIA NVaa" [ 18.222] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 18.222] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 18.222] (==) NOUVEAU(0): RGB weight 888 [ 18.222] (==) NOUVEAU(0): Default visual is TrueColor [ 18.222] (==) NOUVEAU(0): Using HW cursor [ 18.222] (==) NOUVEAU(0): GLX sync to VBlank disabled. [ 18.222] (==) NOUVEAU(0): Page flipping enabled [ 18.222] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2] [ 18.265] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 18.267] (II) NOUVEAU(0): Output HDMI-1 has no monitor section [ 18.295] (II) NOUVEAU(0): EDID for output VGA-1 [ 18.295] (II) NOUVEAU(0): Manufacturer: HWP Model: 2904 Serial#: 16843009 [ 18.295] (II) NOUVEAU(0): Year: 2011 Week: 42 [ 18.295] (II) NOUVEAU(0): EDID Version: 1.3 [ 18.295] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 18.295] (II) NOUVEAU(0): Sync: Separate [ 18.295] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 44 vert.: 25 [ 18.295] (II) NOUVEAU(0): Gamma: 2.20 [ 18.295] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display [ 18.295] (II) NOUVEAU(0): Default color space is primary color space [ 18.295] (II) NOUVEAU(0): First detailed timing is preferred mode [ 18.295] (II) NOUVEAU(0): redX: 0.648 redY: 0.336 greenX: 0.294 greenY: 0.607 [ 18.295] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.064 whiteX: 0.313 whiteY: 0.329 [ 18.295] (II) NOUVEAU(0): Supported established timings: [ 18.295] (II) NOUVEAU(0): 720x400@70Hz [ 18.295] (II) NOUVEAU(0): 640x480@60Hz [ 18.295] (II) NOUVEAU(0): 800x600@60Hz [ 18.295] (II) NOUVEAU(0): 1024x768@60Hz [ 18.295] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 18.295] (II) NOUVEAU(0): Supported standard timings: [ 18.295] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 18.295] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 18.295] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 18.295] (II) NOUVEAU(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321 [ 18.295] (II) NOUVEAU(0): Supported detailed timing: [ 18.295] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 443 x 249 mm [ 18.295] (II) NOUVEAU(0): h_active: 1600 h_sync: 1624 h_sync_end 1704 h_blank_end 1800 h_border: 0 [ 18.295] (II) NOUVEAU(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 1000 v_border: 0 [ 18.295] (II) NOUVEAU(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz [ 18.295] (II) NOUVEAU(0): Monitor name: HP S2031 [ 18.295] (II) NOUVEAU(0): Serial No: 3CQ142NS3P [ 18.295] (II) NOUVEAU(0): EDID (in hex): [ 18.296] (II) NOUVEAU(0): 00ffffffffffff0022f0042901010101 [ 18.296] (II) NOUVEAU(0): 2a150103682c19782e0625a6564b9b25 [ 18.296] (II) NOUVEAU(0): 105054a1080081c081809500a9c00101 [ 18.296] (II) NOUVEAU(0): 010101010101302a40c8608464301850 [ 18.296] (II) NOUVEAU(0): 1300bbf91000001e000000fd00324c18 [ 18.296] (II) NOUVEAU(0): 5311000a202020202020000000fc0048 [ 18.296] (II) NOUVEAU(0): 502053323033310a20202020000000ff [ 18.296] (II) NOUVEAU(0): 003343513134324e5333500a2020003c [ 18.296] (II) NOUVEAU(0): Printing probed modes for output VGA-1 [ 18.296] (II) NOUVEAU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP) [ 18.296] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 18.296] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 18.296] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz) [ 18.296] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 18.296] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 18.296] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 18.296] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 18.298] (II) NOUVEAU(0): EDID for output HDMI-1 [ 18.298] (II) NOUVEAU(0): Output VGA-1 connected [ 18.298] (II) NOUVEAU(0): Output HDMI-1 disconnected [ 18.298] (II) NOUVEAU(0): Using exact sizes for initial modes [ 18.298] (II) NOUVEAU(0): Output VGA-1 using initial mode 1600x900 +0+0 [ 18.298] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 18.298] (--) NOUVEAU(0): Virtual size is 1600x900 (pitch 0) [ 18.298] (**) NOUVEAU(0): Driver mode "1600x900": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz [ 18.298] (II) NOUVEAU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP) [ 18.298] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz [ 18.298] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 18.298] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz [ 18.299] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 18.299] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz [ 18.299] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz) [ 18.299] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 18.299] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 18.299] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz [ 18.299] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 18.299] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz [ 18.299] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 18.299] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz [ 18.299] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 18.299] (==) NOUVEAU(0): DPI set to (96, 96) [ 18.299] (II) Loading sub module "fb" [ 18.299] (II) LoadModule: "fb" [ 18.299] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 18.326] (II) Module fb: vendor="X.Org Foundation" [ 18.326] compiled for 1.14.2, module version = 1.0.0 [ 18.326] ABI class: X.Org ANSI C Emulation, version 0.4 [ 18.326] (II) Loading sub module "exa" [ 18.326] (II) LoadModule: "exa" [ 18.326] (II) Loading /usr/lib64/xorg/modules/libexa.so [ 18.334] (II) Module exa: vendor="X.Org Foundation" [ 18.334] compiled for 1.14.2, module version = 2.6.0 [ 18.334] ABI class: X.Org Video Driver, version 14.1 [ 18.334] (II) Loading sub module "shadowfb" [ 18.334] (II) LoadModule: "shadowfb" [ 18.334] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so [ 18.363] (II) Module shadowfb: vendor="X.Org Foundation" [ 18.363] compiled for 1.14.2, module version = 1.0.0 [ 18.363] ABI class: X.Org ANSI C Emulation, version 0.4 [ 18.363] (II) UnloadModule: "vesa" [ 18.363] (II) Unloading vesa [ 18.363] (II) UnloadModule: "modesetting" [ 18.363] (II) Unloading modesetting [ 18.363] (II) UnloadModule: "fbdev" [ 18.363] (II) Unloading fbdev [ 18.363] (II) UnloadSubModule: "fbdevhw" [ 18.363] (II) Unloading fbdevhw [ 18.363] (--) Depth 24 pixmap format is 32 bpp [ 18.363] (II) NOUVEAU(0): Opened GPU channel 0 [ 18.369] (II) NOUVEAU(0): [DRI2] Setup complete [ 18.369] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 18.369] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 18.370] (II) EXA(0): Driver allocated offscreen pixmaps [ 18.370] (II) EXA(0): Driver registered support for the following operations: [ 18.370] (II) Solid [ 18.370] (II) Copy [ 18.370] (II) Composite (RENDER acceleration) [ 18.370] (II) UploadToScreen [ 18.370] (II) DownloadFromScreen [ 18.370] (==) NOUVEAU(0): Backing store disabled [ 18.370] (==) NOUVEAU(0): Silken mouse enabled [ 18.370] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 18.370] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 18.370] (==) NOUVEAU(0): DPMS enabled [ 18.370] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 18.371] (--) RandR disabled [ 18.377] (II) SELinux: Disabled by boolean [ 20.347] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 20.347] (II) AIGLX: enabled GLX_INTEL_swap_event [ 20.347] (II) AIGLX: enabled GLX_ARB_create_context [ 20.347] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 20.347] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 20.347] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 20.347] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 20.349] (II) AIGLX: Loaded and initialized nouveau [ 20.349] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.354] (II) NOUVEAU(0): NVEnterVT is called. [ 20.372] (II) NOUVEAU(0): Setting screen physical size to 423 x 238 [ 20.372] resize called 1600 900 [ 20.523] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.523] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.523] (**) Power Button: Applying InputClass "system-keyboard" [ 20.523] (II) LoadModule: "evdev" [ 20.523] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 20.523] (II) Module evdev: vendor="X.Org Foundation" [ 20.523] compiled for 1.14.2, module version = 2.8.1 [ 20.523] Module class: X.Org XInput Driver [ 20.523] ABI class: X.Org XInput driver, version 19.1 [ 20.523] (II) Using input driver 'evdev' for 'Power Button' [ 20.523] (**) Power Button: always reports core events [ 20.523] (**) evdev: Power Button: Device: "/dev/input/event1" [ 20.524] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.524] (--) evdev: Power Button: Found keys [ 20.524] (II) evdev: Power Button: Configuring as keyboard [ 20.524] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 20.524] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 20.524] (**) Option "xkb_rules" "evdev" [ 20.524] (**) Option "xkb_model" "pc104" [ 20.524] (**) Option "xkb_layout" "us" [ 20.562] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 20.562] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 20.562] (**) Video Bus: Applying InputClass "system-keyboard" [ 20.562] (II) Using input driver 'evdev' for 'Video Bus' [ 20.562] (**) Video Bus: always reports core events [ 20.562] (**) evdev: Video Bus: Device: "/dev/input/event2" [ 20.562] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 20.562] (--) evdev: Video Bus: Found keys [ 20.562] (II) evdev: Video Bus: Configuring as keyboard [ 20.562] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input2/event2" [ 20.562] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 20.562] (**) Option "xkb_rules" "evdev" [ 20.562] (**) Option "xkb_model" "pc104" [ 20.562] (**) Option "xkb_layout" "us" [ 20.563] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 20.563] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.564] (**) Power Button: Applying InputClass "system-keyboard" [ 20.564] (II) Using input driver 'evdev' for 'Power Button' [ 20.564] (**) Power Button: always reports core events [ 20.564] (**) evdev: Power Button: Device: "/dev/input/event0" [ 20.564] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.564] (--) evdev: Power Button: Found keys [ 20.564] (II) evdev: Power Button: Configuring as keyboard [ 20.564] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" [ 20.564] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 20.564] (**) Option "xkb_rules" "evdev" [ 20.564] (**) Option "xkb_model" "pc104" [ 20.564] (**) Option "xkb_layout" "us" [ 20.565] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/event4) [ 20.565] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Applying InputClass "evdev pointer catchall" [ 20.565] (II) Using input driver 'evdev' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00' [ 20.565] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: always reports core events [ 20.565] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Device: "/dev/input/event4" [ 20.566] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Vendor 0x45e Product 0xe1 [ 20.566] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found 9 mouse buttons [ 20.566] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found scroll wheel(s) [ 20.566] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found relative axes [ 20.566] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found x and y relative axes [ 20.566] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Configuring as mouse [ 20.566] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Adding scrollwheel support [ 20.566] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: YAxisMapping: buttons 4 and 5 [ 20.566] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 20.566] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/input/input4/event4" [ 20.566] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (type: MOUSE, id 9) [ 20.566] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: initialized for relative axes. [ 20.567] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) keeping acceleration scheme 1 [ 20.567] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration profile 0 [ 20.567] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration factor: 2.000 [ 20.567] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration threshold: 4 [ 20.568] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/mouse0) [ 20.568] (II) No input driver specified, ignoring this device. [ 20.568] (II) This device may have been added with another device file. [ 20.568] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event3) [ 20.568] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall" [ 20.568] (**) DELL Dell USB Entry Keyboard: Applying InputClass "system-keyboard" [ 20.568] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard' [ 20.568] (**) DELL Dell USB Entry Keyboard: always reports core events [ 20.569] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event3" [ 20.569] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107 [ 20.569] (--) evdev: DELL Dell USB Entry Keyboard: Found keys [ 20.569] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard [ 20.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input3/event3" [ 20.569] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 10) [ 20.569] (**) Option "xkb_rules" "evdev" [ 20.569] (**) Option "xkb_model" "pc104" [ 20.569] (**) Option "xkb_layout" "us" [ 20.570] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event10) [ 20.570] (II) No input driver specified, ignoring this device. [ 20.570] (II) This device may have been added with another device file. [ 20.571] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event11) [ 20.571] (II) No input driver specified, ignoring this device. [ 20.571] (II) This device may have been added with another device file. [ 20.571] (II) config/udev: Adding input device HDA NVidia Mic (/dev/input/event12) [ 20.571] (II) No input driver specified, ignoring this device. [ 20.571] (II) This device may have been added with another device file. [ 20.572] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 Phantom (/dev/input/event5) [ 20.572] (II) No input driver specified, ignoring this device. [ 20.572] (II) This device may have been added with another device file. [ 20.573] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event6) [ 20.573] (II) No input driver specified, ignoring this device. [ 20.573] (II) This device may have been added with another device file. [ 20.573] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event7) [ 20.573] (II) No input driver specified, ignoring this device. [ 20.573] (II) This device may have been added with another device file. [ 20.574] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event8) [ 20.574] (II) No input driver specified, ignoring this device. [ 20.574] (II) This device may have been added with another device file. [ 20.575] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event9) [ 20.575] (II) No input driver specified, ignoring this device. [ 20.575] (II) This device may have been added with another device file. [ 20.575] (II) config/udev: Adding drm device (/dev/dri/card0) [ 40.919] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10500 [ 40.919] (II) NOUVEAU(0): Using EDID range info for horizontal sync [ 40.919] (II) NOUVEAU(0): Using EDID range info for vertical refresh [ 40.919] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 40.919] (II) NOUVEAU(0): Modeline "1600x900"x0.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP) [ 40.919] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 40.919] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 40.919] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 40.919] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 40.919] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 40.919] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 40.919] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 40.919] (II) NOUVEAU(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ 40.923] resize called 1600 900 [ 47.587] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10500 [ 47.587] (II) NOUVEAU(0): Using hsync ranges from config file [ 47.587] (II) NOUVEAU(0): Using vrefresh ranges from config file [ 47.587] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 47.587] (II) NOUVEAU(0): Modeline "1600x900"x0.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP) [ 47.587] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 47.587] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 47.587] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 47.587] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 47.587] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 47.587] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 47.587] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 47.587] (II) NOUVEAU(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ 47.617] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10500 [ 47.656] (II) NOUVEAU(0): Using hsync ranges from config file [ 47.656] (II) NOUVEAU(0): Using vrefresh ranges from config file [ 47.656] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 47.656] (II) NOUVEAU(0): Modeline "1600x900"x0.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP) [ 47.656] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 47.656] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 47.656] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 47.656] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 47.656] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 47.656] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 47.656] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 47.657] (II) NOUVEAU(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ 95.477] nouveau_exa_download_from_screen:299 - falling back to memcpy ignores tiling [ 95.478] (EE) [ 95.478] (EE) Backtrace: [ 95.483] (EE) 0: /usr/bin/X (OsLookupColor+0x129) [0x46edb9] [ 95.484] (EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x32bc60ef9f] [ 95.514] (EE) 2: /lib64/libc.so.6 (__memcpy_sse2+0xd2) [0x32bbe8ee12] [ 95.515] (EE) 3: /usr/lib64/xorg/modules/libexa.so (exaMoveOutPixmap+0xed6) [0x7f8bf003e406] [ 95.517] (EE) 4: /usr/lib64/xorg/modules/libexa.so (exaMoveOutPixmap+0x1393) [0x7f8bf003eab3] [ 95.518] (EE) 5: /usr/lib64/xorg/modules/libexa.so (exaMoveOutPixmap+0x3a12) [0x7f8bf0043852] [ 95.521] (EE) 6: /usr/lib64/xorg/modules/libexa.so (exaEnableDisableFBAccess+0x3414) [0x7f8bf004b884] [ 95.532] (EE) 7: /usr/bin/X (miCopyRegion+0x1ad) [0x574d2d] [ 95.532] (EE) 8: /usr/bin/X (miDoCopy+0x456) [0x5752b6] [ 95.535] (EE) 9: /usr/lib64/xorg/modules/libexa.so (exaMoveOutPixmap+0x3f1e) [0x7f8bf004444e] [ 95.535] (EE) 10: /usr/bin/X (dixDestroyPixmap+0x711) [0x433a31] [ 95.536] (EE) 11: /usr/bin/X (SendErrorToClient+0x3f7) [0x436fa7] [ 95.536] (EE) 12: /usr/bin/X (_init+0x3aaa) [0x429b4a] [ 95.537] (EE) 13: /lib64/libc.so.6 (__libc_start_main+0xf5) [0x32bbe21b75] [ 95.538] (EE) 14: /usr/bin/X (_start+0x29) [0x4267b1] [ 95.540] (EE) 15: ? (?+0x29) [0x29] [ 95.540] (EE) [ 95.540] (EE) Segmentation fault at address 0xc0 [ 95.540] (EE) Fatal server error: [ 95.540] (EE) Caught signal 11 (Segmentation fault). Server aborting [ 95.540] (EE) [ 95.540] (EE) Please consult the Fedora Project support at http://wiki.x.org for help. [ 95.540] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 95.540] (EE) [ 95.542] (II) AIGLX: Suspending AIGLX clients for VT switch [ 95.542] (II) NOUVEAU(0): NVLeaveVT is called. [ 95.651] (EE) Server terminated with error (1). Closing log file. ----------------------------------------------------------------------------- Xorg.0.log (after screen recovers but remains locked up): [ 112.764] X.Org X Server 1.14.2 Release Date: 2013-06-25 [ 112.764] X Protocol Version 11, Revision 0 [ 112.764] Build Operating System: 2.6.32-358.14.1.el6.x86_64 [ 112.764] Current Operating System: Linux bigdog.hci.com 3.10.3-300.fc19.x86_64 #1 SMP Fri Jul 26 00:00:58 UTC 2013 x86_64 [ 112.764] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.3-300.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root quiet LANG=en_US.UTF-8 [ 112.764] Build Date: 22 July 2013 04:33:06AM [ 112.764] Build ID: xorg-x11-server 1.14.2-7.fc19 [ 112.764] Current version of pixman: 0.30.0 [ 112.764] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 112.764] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 112.765] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 29 17:06:07 2013 [ 112.765] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 112.765] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 112.765] (==) No Layout section. Using the first Screen section. [ 112.765] (==) No screen section available. Using defaults. [ 112.765] (**) |-->Screen "Default Screen Section" (0) [ 112.765] (**) | |-->Monitor "" [ 112.765] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 112.765] (==) Automatically adding devices [ 112.765] (==) Automatically enabling devices [ 112.765] (==) Automatically adding GPU devices [ 112.765] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 112.765] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 112.765] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 112.765] (II) Loader magic: 0x800d00 [ 112.765] (II) Module ABI versions: [ 112.765] X.Org ANSI C Emulation: 0.4 [ 112.765] X.Org Video Driver: 14.1 [ 112.765] X.Org XInput driver : 19.2 [ 112.765] X.Org Server Extension : 7.0 [ 112.766] (II) xfree86: Adding drm device (/dev/dri/card0) [ 112.767] (--) PCI:*(0:2:0:0) 10de:0849:10de:cb84 rev 162, Mem @ 0xfb000000/16777216, 0xd8000000/134217728, 0xe6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072 [ 112.767] Initializing built-in extension Generic Event Extension [ 112.767] Initializing built-in extension SHAPE [ 112.767] Initializing built-in extension MIT-SHM [ 112.767] Initializing built-in extension XInputExtension [ 112.767] Initializing built-in extension XTEST [ 112.767] Initializing built-in extension BIG-REQUESTS [ 112.767] Initializing built-in extension SYNC [ 112.767] Initializing built-in extension XKEYBOARD [ 112.767] Initializing built-in extension XC-MISC [ 112.767] Initializing built-in extension XINERAMA [ 112.767] Initializing built-in extension XFIXES [ 112.767] Initializing built-in extension RENDER [ 112.767] Initializing built-in extension RANDR [ 112.767] Initializing built-in extension COMPOSITE [ 112.767] Initializing built-in extension DAMAGE [ 112.767] Initializing built-in extension MIT-SCREEN-SAVER [ 112.767] Initializing built-in extension DOUBLE-BUFFER [ 112.767] Initializing built-in extension RECORD [ 112.767] Initializing built-in extension DPMS [ 112.768] Initializing built-in extension X-Resource [ 112.768] Initializing built-in extension XVideo [ 112.768] Initializing built-in extension XVideo-MotionCompensation [ 112.768] Initializing built-in extension SELinux [ 112.768] Initializing built-in extension XFree86-VidModeExtension [ 112.768] Initializing built-in extension XFree86-DGA [ 112.768] Initializing built-in extension XFree86-DRI [ 112.768] Initializing built-in extension DRI2 [ 112.768] (II) "glx" will be loaded by default. [ 112.768] (II) LoadModule: "dri2" [ 112.768] (II) Module "dri2" already built-in [ 112.768] (II) LoadModule: "glamoregl" [ 112.768] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [ 112.769] (II) Module glamoregl: vendor="X.Org Foundation" [ 112.769] compiled for 1.14.0, module version = 0.5.0 [ 112.769] ABI class: X.Org ANSI C Emulation, version 0.4 [ 112.769] (II) LoadModule: "glx" [ 112.770] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 112.770] (II) Module glx: vendor="X.Org Foundation" [ 112.770] compiled for 1.14.2, module version = 1.0.0 [ 112.770] ABI class: X.Org Server Extension, version 7.0 [ 112.770] (==) AIGLX enabled [ 112.770] Loading extension GLX [ 112.770] (==) Matched nouveau as autoconfigured driver 0 [ 112.770] (==) Matched nv as autoconfigured driver 1 [ 112.770] (==) Matched nouveau as autoconfigured driver 2 [ 112.770] (==) Matched nv as autoconfigured driver 3 [ 112.770] (==) Matched vesa as autoconfigured driver 4 [ 112.770] (==) Matched modesetting as autoconfigured driver 5 [ 112.770] (==) Matched fbdev as autoconfigured driver 6 [ 112.770] (==) Assigned the driver to the xf86ConfigLayout [ 112.770] (II) LoadModule: "nouveau" [ 112.770] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [ 112.770] (II) Module nouveau: vendor="X.Org Foundation" [ 112.770] compiled for 1.14.0, module version = 1.0.7 [ 112.770] Module class: X.Org Video Driver [ 112.770] ABI class: X.Org Video Driver, version 14.1 [ 112.770] (II) LoadModule: "nv" [ 112.770] (WW) Warning, couldn't open module nv [ 112.770] (II) UnloadModule: "nv" [ 112.770] (II) Unloading nv [ 112.770] (EE) Failed to load module "nv" (module does not exist, 0) [ 112.770] (II) LoadModule: "vesa" [ 112.770] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 112.770] (II) Module vesa: vendor="X.Org Foundation" [ 112.770] compiled for 1.14.0, module version = 2.3.2 [ 112.770] Module class: X.Org Video Driver [ 112.770] ABI class: X.Org Video Driver, version 14.1 [ 112.770] (II) LoadModule: "modesetting" [ 112.770] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [ 112.770] (II) Module modesetting: vendor="X.Org Foundation" [ 112.770] compiled for 1.14.1, module version = 0.6.0 [ 112.770] Module class: X.Org Video Driver [ 112.770] ABI class: X.Org Video Driver, version 14.1 [ 112.770] (II) LoadModule: "fbdev" [ 112.770] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 112.770] (II) Module fbdev: vendor="X.Org Foundation" [ 112.770] compiled for 1.14.0, module version = 0.4.3 [ 112.770] Module class: X.Org Video Driver [ 112.770] ABI class: X.Org Video Driver, version 14.1 [ 112.770] (II) NOUVEAU driver [ 112.770] (II) NOUVEAU driver for NVIDIA chipset families : [ 112.770] RIVA TNT (NV04) [ 112.770] RIVA TNT2 (NV05) [ 112.770] GeForce 256 (NV10) [ 112.770] GeForce 2 (NV11, NV15) [ 112.770] GeForce 4MX (NV17, NV18) [ 112.770] GeForce 3 (NV20) [ 112.770] GeForce 4Ti (NV25, NV28) [ 112.770] GeForce FX (NV3x) [ 112.770] GeForce 6 (NV4x) [ 112.770] GeForce 7 (G7x) [ 112.770] GeForce 8 (G8x) [ 112.770] GeForce GTX 200 (NVA0) [ 112.770] GeForce GTX 400 (NVC0) [ 112.770] (II) VESA: driver for VESA chipsets: vesa [ 112.770] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 112.770] (II) FBDEV: driver for framebuffer: fbdev [ 112.770] (++) using VT number 1 [ 112.773] (II) [drm] nouveau interface version: 1.1.1 [ 112.773] (WW) Falling back to old probe method for vesa [ 112.773] (WW) Falling back to old probe method for modesetting [ 112.773] (WW) Falling back to old probe method for fbdev [ 112.773] (II) Loading sub module "fbdevhw" [ 112.773] (II) LoadModule: "fbdevhw" [ 112.773] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 112.773] (II) Module fbdevhw: vendor="X.Org Foundation" [ 112.773] compiled for 1.14.2, module version = 0.0.2 [ 112.773] ABI class: X.Org Video Driver, version 14.1 [ 112.773] (II) Loading sub module "dri" [ 112.773] (II) LoadModule: "dri" [ 112.773] (II) Module "dri" already built-in [ 112.773] (II) NOUVEAU(0): Loaded DRI module [ 112.773] (--) NOUVEAU(0): Chipset: "NVIDIA NVaa" [ 112.773] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 112.773] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 112.773] (==) NOUVEAU(0): RGB weight 888 [ 112.773] (==) NOUVEAU(0): Default visual is TrueColor [ 112.773] (==) NOUVEAU(0): Using HW cursor [ 112.773] (==) NOUVEAU(0): GLX sync to VBlank disabled. [ 112.773] (==) NOUVEAU(0): Page flipping enabled [ 112.773] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2] [ 112.811] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 112.813] (II) NOUVEAU(0): Output HDMI-1 has no monitor section [ 112.844] (II) NOUVEAU(0): EDID for output VGA-1 [ 112.844] (II) NOUVEAU(0): Manufacturer: HWP Model: 2904 Serial#: 16843009 [ 112.844] (II) NOUVEAU(0): Year: 2011 Week: 42 [ 112.844] (II) NOUVEAU(0): EDID Version: 1.3 [ 112.844] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 112.844] (II) NOUVEAU(0): Sync: Separate [ 112.844] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 44 vert.: 25 [ 112.844] (II) NOUVEAU(0): Gamma: 2.20 [ 112.844] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display [ 112.844] (II) NOUVEAU(0): Default color space is primary color space [ 112.844] (II) NOUVEAU(0): First detailed timing is preferred mode [ 112.844] (II) NOUVEAU(0): redX: 0.648 redY: 0.336 greenX: 0.294 greenY: 0.607 [ 112.844] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.064 whiteX: 0.313 whiteY: 0.329 [ 112.844] (II) NOUVEAU(0): Supported established timings: [ 112.844] (II) NOUVEAU(0): 720x400@70Hz [ 112.844] (II) NOUVEAU(0): 640x480@60Hz [ 112.844] (II) NOUVEAU(0): 800x600@60Hz [ 112.844] (II) NOUVEAU(0): 1024x768@60Hz [ 112.844] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 112.844] (II) NOUVEAU(0): Supported standard timings: [ 112.844] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 112.844] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 112.844] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 112.844] (II) NOUVEAU(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321 [ 112.844] (II) NOUVEAU(0): Supported detailed timing: [ 112.844] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 443 x 249 mm [ 112.844] (II) NOUVEAU(0): h_active: 1600 h_sync: 1624 h_sync_end 1704 h_blank_end 1800 h_border: 0 [ 112.844] (II) NOUVEAU(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 1000 v_border: 0 [ 112.844] (II) NOUVEAU(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz [ 112.844] (II) NOUVEAU(0): Monitor name: HP S2031 [ 112.844] (II) NOUVEAU(0): Serial No: 3CQ142NS3P [ 112.844] (II) NOUVEAU(0): EDID (in hex): [ 112.844] (II) NOUVEAU(0): 00ffffffffffff0022f0042901010101 [ 112.844] (II) NOUVEAU(0): 2a150103682c19782e0625a6564b9b25 [ 112.844] (II) NOUVEAU(0): 105054a1080081c081809500a9c00101 [ 112.844] (II) NOUVEAU(0): 010101010101302a40c8608464301850 [ 112.844] (II) NOUVEAU(0): 1300bbf91000001e000000fd00324c18 [ 112.844] (II) NOUVEAU(0): 5311000a202020202020000000fc0048 [ 112.844] (II) NOUVEAU(0): 502053323033310a20202020000000ff [ 112.844] (II) NOUVEAU(0): 003343513134324e5333500a2020003c [ 112.844] (II) NOUVEAU(0): Printing probed modes for output VGA-1 [ 112.844] (II) NOUVEAU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP) [ 112.844] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 112.844] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 112.844] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz) [ 112.844] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 112.844] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 112.844] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 112.844] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 112.846] (II) NOUVEAU(0): EDID for output HDMI-1 [ 112.846] (II) NOUVEAU(0): Output VGA-1 connected [ 112.846] (II) NOUVEAU(0): Output HDMI-1 disconnected [ 112.846] (II) NOUVEAU(0): Using exact sizes for initial modes [ 112.846] (II) NOUVEAU(0): Output VGA-1 using initial mode 1600x900 +0+0 [ 112.846] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 112.846] (--) NOUVEAU(0): Virtual size is 1600x900 (pitch 0) [ 112.846] (**) NOUVEAU(0): Driver mode "1600x900": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz [ 112.846] (II) NOUVEAU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP) [ 112.846] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz [ 112.846] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 112.846] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz [ 112.846] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 112.846] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz [ 112.846] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz) [ 112.846] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 112.846] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 112.846] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz [ 112.846] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 112.846] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz [ 112.846] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 112.846] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz [ 112.846] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 112.846] (==) NOUVEAU(0): DPI set to (96, 96) [ 112.846] (II) Loading sub module "fb" [ 112.846] (II) LoadModule: "fb" [ 112.846] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 112.847] (II) Module fb: vendor="X.Org Foundation" [ 112.847] compiled for 1.14.2, module version = 1.0.0 [ 112.847] ABI class: X.Org ANSI C Emulation, version 0.4 [ 112.847] (II) Loading sub module "exa" [ 112.847] (II) LoadModule: "exa" [ 112.847] (II) Loading /usr/lib64/xorg/modules/libexa.so [ 112.847] (II) Module exa: vendor="X.Org Foundation" [ 112.847] compiled for 1.14.2, module version = 2.6.0 [ 112.847] ABI class: X.Org Video Driver, version 14.1 [ 112.847] (II) Loading sub module "shadowfb" [ 112.847] (II) LoadModule: "shadowfb" [ 112.848] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so [ 112.848] (II) Module shadowfb: vendor="X.Org Foundation" [ 112.848] compiled for 1.14.2, module version = 1.0.0 [ 112.848] ABI class: X.Org ANSI C Emulation, version 0.4 [ 112.848] (II) UnloadModule: "vesa" [ 112.848] (II) Unloading vesa [ 112.848] (II) UnloadModule: "modesetting" [ 112.848] (II) Unloading modesetting [ 112.848] (II) UnloadModule: "fbdev" [ 112.848] (II) Unloading fbdev [ 112.848] (II) UnloadSubModule: "fbdevhw" [ 112.848] (II) Unloading fbdevhw [ 112.848] (--) Depth 24 pixmap format is 32 bpp [ 112.848] (II) NOUVEAU(0): Opened GPU channel 0 [ 112.851] (II) NOUVEAU(0): [DRI2] Setup complete [ 112.851] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 112.851] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 112.851] (II) EXA(0): Driver allocated offscreen pixmaps [ 112.851] (II) EXA(0): Driver registered support for the following operations: [ 112.851] (II) Solid [ 112.851] (II) Copy [ 112.851] (II) Composite (RENDER acceleration) [ 112.851] (II) UploadToScreen [ 112.851] (II) DownloadFromScreen [ 112.851] (==) NOUVEAU(0): Backing store disabled [ 112.851] (==) NOUVEAU(0): Silken mouse enabled [ 112.851] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 112.851] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 112.851] (==) NOUVEAU(0): DPMS enabled [ 112.851] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 112.852] (--) RandR disabled [ 112.859] (II) SELinux: Disabled by boolean [ 112.870] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 112.870] (II) AIGLX: enabled GLX_INTEL_swap_event [ 112.870] (II) AIGLX: enabled GLX_ARB_create_context [ 112.870] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 112.870] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 112.870] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 112.870] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 112.871] (II) AIGLX: Loaded and initialized nouveau [ 112.871] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 115.885] (II) NOUVEAU(0): NVEnterVT is called. [ 115.917] (II) NOUVEAU(0): Setting screen physical size to 423 x 238 [ 115.918] resize called 1600 900 [ 115.986] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 115.987] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 115.987] (**) Power Button: Applying InputClass "system-keyboard" [ 115.987] (II) LoadModule: "evdev" [ 115.987] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 115.988] (II) Module evdev: vendor="X.Org Foundation" [ 115.988] compiled for 1.14.2, module version = 2.8.1 [ 115.988] Module class: X.Org XInput Driver [ 115.988] ABI class: X.Org XInput driver, version 19.1 [ 115.988] (II) Using input driver 'evdev' for 'Power Button' [ 115.988] (**) Power Button: always reports core events [ 115.988] (**) evdev: Power Button: Device: "/dev/input/event1" [ 115.988] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 115.988] (--) evdev: Power Button: Found keys [ 115.988] (II) evdev: Power Button: Configuring as keyboard [ 115.988] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 115.988] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 115.988] (**) Option "xkb_rules" "evdev" [ 115.988] (**) Option "xkb_model" "pc104" [ 115.988] (**) Option "xkb_layout" "us" [ 116.033] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 116.034] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 116.034] (**) Video Bus: Applying InputClass "system-keyboard" [ 116.034] (II) Using input driver 'evdev' for 'Video Bus' [ 116.034] (**) Video Bus: always reports core events [ 116.034] (**) evdev: Video Bus: Device: "/dev/input/event2" [ 116.034] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 116.034] (--) evdev: Video Bus: Found keys [ 116.034] (II) evdev: Video Bus: Configuring as keyboard [ 116.034] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input2/event2" [ 116.034] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 116.034] (**) Option "xkb_rules" "evdev" [ 116.034] (**) Option "xkb_model" "pc104" [ 116.034] (**) Option "xkb_layout" "us" [ 116.037] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 116.037] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 116.037] (**) Power Button: Applying InputClass "system-keyboard" [ 116.037] (II) Using input driver 'evdev' for 'Power Button' [ 116.037] (**) Power Button: always reports core events [ 116.037] (**) evdev: Power Button: Device: "/dev/input/event0" [ 116.037] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 116.037] (--) evdev: Power Button: Found keys [ 116.037] (II) evdev: Power Button: Configuring as keyboard [ 116.037] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" [ 116.037] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 116.037] (**) Option "xkb_rules" "evdev" [ 116.037] (**) Option "xkb_model" "pc104" [ 116.037] (**) Option "xkb_layout" "us" [ 116.038] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/event4) [ 116.038] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Applying InputClass "evdev pointer catchall" [ 116.038] (II) Using input driver 'evdev' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00' [ 116.038] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: always reports core events [ 116.038] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Device: "/dev/input/event4" [ 116.038] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Vendor 0x45e Product 0xe1 [ 116.038] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found 9 mouse buttons [ 116.038] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found scroll wheel(s) [ 116.038] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found relative axes [ 116.038] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found x and y relative axes [ 116.038] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Configuring as mouse [ 116.038] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Adding scrollwheel support [ 116.038] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: YAxisMapping: buttons 4 and 5 [ 116.038] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 116.038] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/input/input4/event4" [ 116.038] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (type: MOUSE, id 9) [ 116.038] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: initialized for relative axes. [ 116.039] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) keeping acceleration scheme 1 [ 116.039] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration profile 0 [ 116.039] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration factor: 2.000 [ 116.039] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration threshold: 4 [ 116.040] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/mouse0) [ 116.040] (II) No input driver specified, ignoring this device. [ 116.040] (II) This device may have been added with another device file. [ 116.041] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event3) [ 116.041] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall" [ 116.041] (**) DELL Dell USB Entry Keyboard: Applying InputClass "system-keyboard" [ 116.041] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard' [ 116.041] (**) DELL Dell USB Entry Keyboard: always reports core events [ 116.041] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event3" [ 116.041] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107 [ 116.041] (--) evdev: DELL Dell USB Entry Keyboard: Found keys [ 116.041] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard [ 116.041] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input3/event3" [ 116.041] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 10) [ 116.041] (**) Option "xkb_rules" "evdev" [ 116.041] (**) Option "xkb_model" "pc104" [ 116.041] (**) Option "xkb_layout" "us" [ 116.043] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event10) [ 116.043] (II) No input driver specified, ignoring this device. [ 116.043] (II) This device may have been added with another device file. [ 116.043] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event11) [ 116.044] (II) No input driver specified, ignoring this device. [ 116.044] (II) This device may have been added with another device file. [ 116.044] (II) config/udev: Adding input device HDA NVidia Mic (/dev/input/event12) [ 116.044] (II) No input driver specified, ignoring this device. [ 116.044] (II) This device may have been added with another device file. [ 116.045] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 Phantom (/dev/input/event5) [ 116.045] (II) No input driver specified, ignoring this device. [ 116.045] (II) This device may have been added with another device file. [ 116.046] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event6) [ 116.046] (II) No input driver specified, ignoring this device. [ 116.046] (II) This device may have been added with another device file. [ 116.046] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event7) [ 116.046] (II) No input driver specified, ignoring this device. [ 116.046] (II) This device may have been added with another device file. [ 116.047] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event8) [ 116.047] (II) No input driver specified, ignoring this device. [ 116.047] (II) This device may have been added with another device file. [ 116.048] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event9) [ 116.048] (II) No input driver specified, ignoring this device. [ 116.048] (II) This device may have been added with another device file. [ 116.048] (II) config/udev: Adding drm device (/dev/dri/card0)