[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11-rc4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.11~rc4-1~exp1 (2013-08-08) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11-rc4-amd64 root=/dev/mapper/globus-root ro [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA69VM-S2/GA-MA69VM-S2, BIOS F8 03/03/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x170000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 00CFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FFC0000000 write-back [ 0.000000] 5 base 0140000000 mask FFE0000000 write-back [ 0.000000] 6 base 0160000000 mask FFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000170000000 aka 5888M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5140-0x000f514f] mapped at [ffff8800000f5140] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01874000, 0x01874fff] PGTABLE [ 0.000000] BRK [0x01875000, 0x01875fff] PGTABLE [ 0.000000] BRK [0x01876000, 0x01876fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x16fe00000-0x16fffffff] [ 0.000000] [mem 0x16fe00000-0x16fffffff] page 2M [ 0.000000] BRK [0x01877000, 0x01877fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x16c000000-0x16fdfffff] [ 0.000000] [mem 0x16c000000-0x16fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x16bffffff] [ 0.000000] [mem 0x100000000-0x16bffffff] page 2M [ 0.000000] BRK [0x01878000, 0x01878fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfedffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k [ 0.000000] RAMDISK: [mem 0x377e2000-0x37be8fff] [ 0.000000] ACPI: RSDP 00000000000f6b00 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee30c0 049B3 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: SSDT 00000000cfee7b40 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfee7d80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee7dc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee7a80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x16fffffff] [ 0.000000] NODE_DATA [mem 0x16fff8000-0x16fffbfff] [ 0.000000] [ffffea0000000000-ffffea00051fffff] PMD -> [ffff88016a600000-ffff88016edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x16fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xcfedffff] [ 0.000000] node 0: [mem 0x100000000-0x16fffffff] [ 0.000000] On node 0 totalpages: 1310334 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11589 pages used for memmap [ 0.000000] DMA32 zone: 847584 pages, LIFO batch:31 [ 0.000000] Normal zone: 6272 pages used for memmap [ 0.000000] Normal zone: 458752 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88016fc00000 s85504 r8192 d20992 u524288 [ 0.000000] pcpu-alloc: s85504 r8192 d20992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1292396 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-rc4-amd64 root=/dev/mapper/globus-root ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 1fc000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 5022408K/5241336K available (3678K kernel code, 639K rwdata, 1588K rodata, 924K init, 924K bss, 218928K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2104.852 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.008051] Calibrating delay loop (skipped), value calculated using timer frequency.. 4209.70 BogoMIPS (lpj=8419408) [ 0.008146] pid_max: default: 32768 minimum: 301 [ 0.008247] Security Framework initialized [ 0.008298] AppArmor: AppArmor disabled by boot time parameter [ 0.008345] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.009268] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.017815] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021308] Mount-cache hash table entries: 256 [ 0.021675] Initializing cgroup subsys memory [ 0.021755] Initializing cgroup subsys devices [ 0.021803] Initializing cgroup subsys freezer [ 0.021850] Initializing cgroup subsys net_cls [ 0.021898] Initializing cgroup subsys blkio [ 0.021945] Initializing cgroup subsys perf_event [ 0.022021] tseg: 00cff00000 [ 0.022024] CPU: Physical Processor ID: 0 [ 0.022071] CPU: Processor Core ID: 0 [ 0.022118] mce: CPU supports 5 MCE banks [ 0.022170] LVT offset 0 assigned for vector 0xf9 [ 0.022220] process: using AMD E400 aware idle routine [ 0.022269] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.022269] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.022269] tlb_flushall_shift: 4 [ 0.022422] Freeing SMP alternatives memory: 12K (ffffffff81788000 - ffffffff8178b000) [ 0.022795] ACPI: Core revision 20130517 [ 0.026238] ACPI: All ACPI Tables successfully acquired [ 0.028748] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069605] smpboot: CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350 (fam: 0f, model: 6b, stepping: 01) [ 0.072000] Performance Events: AMD PMU driver. [ 0.072000] ... version: 0 [ 0.072000] ... bit width: 48 [ 0.072000] ... generic registers: 4 [ 0.072000] ... value mask: 0000ffffffffffff [ 0.072000] ... max period: 00007fffffffffff [ 0.072000] ... fixed-purpose events: 0 [ 0.072000] ... event mask: 000000000000000f [ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072000] smpboot: Booting Node 0, Processors #1 [ 0.160132] Brought up 2 CPUs [ 0.160224] smpboot: Total of 2 processors activated (8419.18 BogoMIPS) [ 0.164092] devtmpfs: initialized [ 0.168633] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes) [ 0.168633] regulator-dummy: no parameters [ 0.168633] NET: Registered protocol family 16 [ 0.168763] node 0 link 0: io port [d000, ffff] [ 0.168769] TOM: 00000000d0000000 aka 3328M [ 0.168816] node 0 link 0: mmio [a0000, bffff] [ 0.168820] node 0 link 0: mmio [d0000000, fe02ffff] [ 0.168823] node 0 link 0: mmio [e0000000, efffffff] [ 0.168826] TOM2: 0000000170000000 aka 5888M [ 0.168874] bus: [bus 00-02] on node 0 link 0 [ 0.168877] bus: 00 [io 0x0000-0xffff] [ 0.168879] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.168882] bus: 00 [mem 0xd0000000-0xffffffff] [ 0.168884] bus: 00 [mem 0x170000000-0xfcffffffff] [ 0.168903] ACPI: bus type PCI registered [ 0.168951] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.169085] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.169139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.184191] PCI: Using configuration type 1 for base access [ 0.185418] bio: create slab at 0 [ 0.185418] ACPI: Added _OSI(Module Device) [ 0.185418] ACPI: Added _OSI(Processor Device) [ 0.185418] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.185418] ACPI: Added _OSI(Processor Aggregator Device) [ 0.185418] ACPI: EC: Look up EC in DSDT [ 0.185740] ACPI: Executed 1 blocks of module-level executable AML code [ 0.192873] ACPI: Interpreter enabled [ 0.192934] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.193071] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571) [ 0.193217] ACPI: (supports S0 S1 S4 S5) [ 0.193265] ACPI: Using IOAPIC for interrupt routing [ 0.193408] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.193559] ACPI: No dock devices found. [ 0.210064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.210460] PCI host bridge to bus 0000:00 [ 0.212006] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.212055] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.212105] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.212153] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.212203] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.212252] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff] [ 0.212309] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 [ 0.212442] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400 [ 0.212477] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.212527] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.212654] pci 0000:00:12.0: [1002:4380] type 00 class 0x010601 [ 0.212675] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07] [ 0.212687] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.212699] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.212710] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.212722] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.212734] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.212856] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 [ 0.212872] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.212954] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.213060] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 [ 0.213076] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.213159] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.213264] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 [ 0.213280] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff] [ 0.213366] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.216059] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 [ 0.216075] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.216164] pci 0000:00:13.3: System wakeup disabled by ACPI [ 0.216269] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 [ 0.216286] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.216377] pci 0000:00:13.4: System wakeup disabled by ACPI [ 0.216500] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 [ 0.216523] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.216613] pci 0000:00:13.5: supports D1 D2 [ 0.216617] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.216658] pci 0000:00:13.5: System wakeup disabled by ACPI [ 0.216768] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.216793] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f] [ 0.216933] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a [ 0.216949] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.216961] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.216972] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.216984] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.216996] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f] [ 0.217112] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.217137] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.217210] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.217251] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.217354] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 [ 0.217503] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.217582] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.217691] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.217808] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.217920] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.218032] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.218213] pci 0000:01:00.0: [1002:683f] type 00 class 0x030000 [ 0.218230] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.218243] pci 0000:01:00.0: reg 0x18: [mem 0xfdf80000-0xfdfbffff 64bit] [ 0.218253] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff] [ 0.218269] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.218315] pci 0000:01:00.0: supports D1 D2 [ 0.218319] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.218398] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 [ 0.218414] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit] [ 0.218490] pci 0000:01:00.1: supports D1 D2 [ 0.224015] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.224065] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.224069] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.224074] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.224155] pci 0000:02:0f.0: [10ec:8167] type 00 class 0x020000 [ 0.224178] pci 0000:02:0f.0: reg 0x10: [io 0xde00-0xdeff] [ 0.224193] pci 0000:02:0f.0: reg 0x14: [mem 0xfdeff000-0xfdeff0ff] [ 0.224249] pci 0000:02:0f.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.224288] pci 0000:02:0f.0: supports D1 D2 [ 0.224291] pci 0000:02:0f.0: PME# supported from D1 D2 D3hot D3cold [ 0.224374] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) [ 0.224426] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.224432] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.224438] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.224442] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.224445] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.224449] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.224453] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.224456] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode) [ 0.224470] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.224523] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.224813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.225388] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.225959] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.226532] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.227104] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.227676] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.228247] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.228819] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.230079] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.230213] ACPI: \_SB_.PCI0: notify handler is installed [ 0.230249] Found 1 acpi root devices [ 0.230375] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.230375] vgaarb: loaded [ 0.230375] vgaarb: bridge control possible 0000:01:00.0 [ 0.230375] PCI: Using ACPI for IRQ routing [ 0.239953] PCI: pci_cache_line_size set to 64 bytes [ 0.240018] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.240022] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff] [ 0.240212] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.240465] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.242566] Switched to clocksource hpet [ 0.243426] pnp: PnP ACPI init [ 0.243498] ACPI: bus type PNP registered [ 0.243700] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.243750] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.243799] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.243850] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.244188] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.244247] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.244335] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.244384] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.244434] system 00:01: [io 0x040b] has been reserved [ 0.244483] system 00:01: [io 0x04d6] has been reserved [ 0.244533] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.244583] system 00:01: [io 0x0c14] has been reserved [ 0.244633] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.244683] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.244733] system 00:01: [io 0x0c6f] has been reserved [ 0.244782] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.244832] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.244882] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.244932] system 00:01: [io 0x4000-0x40fe] could not be reserved [ 0.244982] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.245032] system 00:01: [io 0x0b00-0x0b1f] could not be reserved [ 0.245082] system 00:01: [io 0x0238-0x023f] has been reserved [ 0.245133] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.245187] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.245346] pnp 00:02: [dma 4] [ 0.245384] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.245482] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.245555] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.245601] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.245654] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.246095] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.246422] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.246756] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.246969] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.247020] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247281] system 00:0b: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.247331] system 00:0b: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.247381] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.247431] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.247481] system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.247531] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.247581] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.247631] system 00:0b: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.247681] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.247731] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.247781] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.247831] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.247856] pnp: PnP ACPI: found 12 devices [ 0.247903] ACPI: bus type PNP unregistered [ 0.256108] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref] [ 0.256165] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.256213] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.256263] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.256313] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.256370] pci 0000:02:0f.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref] [ 0.256424] pci 0000:00:14.4: PCI bridge to [bus 02] [ 0.256473] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.256526] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.256577] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.256645] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.256649] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.256652] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.256656] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.256660] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff] [ 0.256664] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.256668] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.256672] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.256676] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.256679] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.256683] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff pref] [ 0.256687] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.256690] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.256694] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.256698] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] [ 0.256701] pci_bus 0000:02: resource 8 [mem 0xd0000000-0xfebfffff] [ 0.256776] NET: Registered protocol family 2 [ 0.257188] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.258000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.258721] TCP: Hash tables configured (established 65536 bind 65536) [ 0.258892] TCP: reno registered [ 0.258957] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.259105] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.259367] NET: Registered protocol family 1 [ 1.916459] pci 0000:01:00.0: Boot video device [ 1.916470] PCI: CLS 4 bytes, default 64 [ 1.916522] Unpacking initramfs... [ 2.026759] Freeing initrd memory: 4124K (ffff8800377e2000 - ffff880037be9000) [ 2.027105] PCI-DMA: Disabling AGP. [ 2.027243] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 2.027290] PCI-DMA: using GART IOMMU. [ 2.027339] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.034038] audit: initializing netlink socket (disabled) [ 2.034111] type=2000 audit(1377414382.028:1): initialized [ 2.051685] bounce pool size: 64 pages [ 2.051738] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.052542] VFS: Disk quotas dquot_6.5.2 [ 2.052622] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.052804] msgmni has been set to 9946 [ 2.053232] alg: No test for stdrng (krng) [ 2.053321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.053425] io scheduler noop registered [ 2.053476] io scheduler deadline registered [ 2.053539] io scheduler cfq registered (default) [ 2.053736] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 2.053861] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.053934] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.054126] GHES: HEST is not enabled! [ 2.054266] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.074855] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.095437] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.096022] Linux agpgart interface v0.103 [ 2.096216] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.130329] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 2.130381] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 2.380113] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.380324] mousedev: PS/2 mouse device common for all mice [ 2.380428] rtc_cmos 00:04: RTC can wake from S4 [ 2.380638] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.380724] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.380786] cpuidle: using governor ladder [ 2.380832] cpuidle: using governor menu [ 2.380924] drop_monitor: Initializing network drop monitor service [ 2.381055] TCP: cubic registered [ 2.381152] NET: Registered protocol family 10 [ 2.381465] mip6: Mobile IPv6 [ 2.381513] NET: Registered protocol family 17 [ 2.381926] PM: Hibernation image not present or could not be loaded. [ 2.381941] registered taskstats version 1 [ 2.382797] rtc_cmos 00:04: setting system clock to 2013-08-25 07:06:23 UTC (1377414383) [ 2.384678] Freeing unused kernel memory: 924K (ffffffff816a1000 - ffffffff81788000) [ 2.384737] Write protecting the kernel read-only data: 6144k [ 2.386717] Freeing unused kernel memory: 408K (ffff88000139a000 - ffff880001400000) [ 2.388757] Freeing unused kernel memory: 460K (ffff88000158d000 - ffff880001600000) [ 2.581967] udevd[60]: starting version 175 [ 2.634455] SCSI subsystem initialized [ 2.640438] ACPI: bus type ATA registered [ 2.653943] microcode: AMD CPU family 0xf not supported [ 2.654050] libata version 3.00 loaded. [ 2.655326] ahci 0000:00:12.0: version 3.0 [ 2.655561] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 2.655743] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.655798] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.660803] scsi0 : ahci [ 2.664686] scsi1 : ahci [ 2.675360] scsi2 : ahci [ 2.687437] scsi3 : ahci [ 2.687618] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 2.691810] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 2.691865] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 2.691919] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.714269] microcode: AMD CPU family 0xf not supported [ 2.723472] device-mapper: uevent: version 1.0.3 [ 2.723606] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 3.012078] ata3: SATA link down (SStatus 0 SControl 300) [ 3.184027] ata2: softreset failed (device not ready) [ 3.184075] ata2: applying PMP SRST workaround and retrying [ 3.184140] ata4: softreset failed (device not ready) [ 3.184195] ata4: applying PMP SRST workaround and retrying [ 3.184256] ata1: softreset failed (device not ready) [ 3.184306] ata1: applying PMP SRST workaround and retrying [ 3.356037] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.356115] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.356193] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.356287] ata4.00: ATAPI: ASUS DRW-1814BLT, 1.13, max UDMA/66 [ 3.356337] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.356708] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.356758] ata4.00: configured for UDMA/66 [ 3.356911] ata2.00: ATA-8: WDC WD6400AAKS-65A7B2, 01.03B01, max UDMA/133 [ 3.356960] ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.357022] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.357893] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.357941] ata2.00: configured for UDMA/133 [ 3.384177] ata1.00: HPA detected: current 625140335, native 625142448 [ 3.384313] ata1.00: ATA-7: WDC WD3200AAJS-00RYA0, 12.01B01, max UDMA/133 [ 3.384361] ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.384410] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.385251] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.385299] ata1.00: configured for UDMA/133 [ 3.385559] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5 [ 3.385899] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5 [ 3.386814] scsi 3:0:0:0: CD-ROM ASUS DRW-1814BLT 1.13 PQ: 0 ANSI: 5 [ 3.389591] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 3.389681] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB) [ 3.390045] sd 0:0:0:0: [sda] Write Protect is off [ 3.390094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.390112] sd 1:0:0:0: [sdb] Write Protect is off [ 3.390160] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.390201] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.390282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.395349] sdb: sdb1 sdb2 [ 3.395846] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.397647] sda: sda1 sda2 sda3 [ 3.398277] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.776039] bio: create slab at 1 [ 3.950681] PM: Starting manual resume from disk [ 3.950739] PM: Hibernation image partition 254:1 present [ 3.950741] PM: Looking for hibernation image. [ 3.950977] PM: Image not found (code -22) [ 3.950982] PM: Hibernation image not present or could not be loaded. [ 3.955811] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] [ 3.955818] PM: Marking nosave pages: [mem 0xcfee0000-0xffffffff] [ 3.956982] PM: Marking nosave pages: [mem 0xc4000000-0xc7ffffff] [ 3.957280] PM: Basic memory bitmaps created [ 3.984628] PM: Basic memory bitmaps freed [ 3.991627] REISERFS (device dm-0): found reiserfs format "3.6" with standard journal [ 3.991692] REISERFS (device dm-0): using ordered data mode [ 3.991739] reiserfs: using flush barriers [ 4.001979] REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 4.003326] REISERFS (device dm-0): checking transaction log (dm-0) [ 4.020333] REISERFS (device dm-0): replayed 1 transactions in 0 seconds [ 4.055301] REISERFS (device dm-0): Using r5 hash to sort names [ 6.744324] udevd[401]: starting version 175 [ 8.461234] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 8.461296] ACPI: Power Button [PWRB] [ 8.461453] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 8.461506] ACPI: Power Button [PWRF] [ 8.647357] EDAC MC: Ver: 3.0.0 [ 8.648455] MCE: In-kernel MCE decoding enabled. [ 8.690096] ACPI: bus type USB registered [ 8.690425] usbcore: registered new interface driver usbfs [ 8.690630] usbcore: registered new interface driver hub [ 8.690831] usbcore: registered new device driver usb [ 8.717128] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.800519] microcode: AMD CPU family 0xf not supported [ 8.836640] microcode: AMD CPU family 0xf not supported [ 8.895548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.900383] ehci-pci: EHCI PCI platform driver [ 8.900793] ehci-pci 0000:00:13.5: EHCI Host Controller [ 8.900858] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 8.900920] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 8.900986] ehci-pci 0000:00:13.5: debug port 1 [ 8.901100] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000 [ 8.911627] ohci-pci: OHCI PCI platform driver [ 8.912030] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 8.912108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.912159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.912211] usb usb1: Product: EHCI Host Controller [ 8.912259] usb usb1: Manufacturer: Linux 3.11-rc4-amd64 ehci_hcd [ 8.912307] usb usb1: SerialNumber: 0000:00:13.5 [ 8.912523] hub 1-0:1.0: USB hub found [ 8.912577] hub 1-0:1.0: 10 ports detected [ 8.913116] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 8.913172] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 8.913272] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 8.926019] AMD64 EDAC driver v3.4.0 [ 8.972046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.972100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.972153] usb usb2: Product: OHCI PCI host controller [ 8.972201] usb usb2: Manufacturer: Linux 3.11-rc4-amd64 ohci_hcd [ 8.972249] usb usb2: SerialNumber: 0000:00:13.0 [ 8.972475] hub 2-0:1.0: USB hub found [ 8.972533] hub 2-0:1.0: 2 ports detected [ 8.972911] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 8.972966] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 8.973064] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 9.032040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.032092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.032144] usb usb3: Product: OHCI PCI host controller [ 9.032192] usb usb3: Manufacturer: Linux 3.11-rc4-amd64 ohci_hcd [ 9.032240] usb usb3: SerialNumber: 0000:00:13.1 [ 9.032463] hub 3-0:1.0: USB hub found [ 9.032520] hub 3-0:1.0: 2 ports detected [ 9.032894] ohci-pci 0000:00:13.2: OHCI PCI host controller [ 9.032949] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 9.033044] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 9.092046] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.092104] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.092158] usb usb4: Product: OHCI PCI host controller [ 9.092207] usb usb4: Manufacturer: Linux 3.11-rc4-amd64 ohci_hcd [ 9.092256] usb usb4: SerialNumber: 0000:00:13.2 [ 9.092404] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 9.093242] hub 4-0:1.0: USB hub found [ 9.093302] hub 4-0:1.0: 2 ports detected [ 9.093704] ohci-pci 0000:00:13.3: OHCI PCI host controller [ 9.093759] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 9.093838] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 9.152036] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.152090] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.152143] usb usb5: Product: OHCI PCI host controller [ 9.152191] usb usb5: Manufacturer: Linux 3.11-rc4-amd64 ohci_hcd [ 9.152239] usb usb5: SerialNumber: 0000:00:13.3 [ 9.152462] hub 5-0:1.0: USB hub found [ 9.152519] hub 5-0:1.0: 2 ports detected [ 9.152903] ohci-pci 0000:00:13.4: OHCI PCI host controller [ 9.152958] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 9.153033] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 9.186080] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.190409] r8169 0000:02:0f.0 (unregistered net_device): not PCI Express [ 9.190794] r8169 0000:02:0f.0 eth0: RTL8169sc/8110sc at 0xffffc90010fc8000, 00:1a:4d:83:4c:bf, XID 18000000 IRQ 23 [ 9.190848] r8169 0000:02:0f.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 9.212059] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.212114] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.212166] usb usb6: Product: OHCI PCI host controller [ 9.212214] usb usb6: Manufacturer: Linux 3.11-rc4-amd64 ohci_hcd [ 9.212262] usb usb6: SerialNumber: 0000:00:13.4 [ 9.212497] hub 6-0:1.0: USB hub found [ 9.212552] hub 6-0:1.0: 2 ports detected [ 9.212774] EDAC amd64: DRAM ECC disabled. [ 9.212828] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 9.212828] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 9.212828] (Note that use of the override may cause unknown side effects.) [ 9.214464] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 9.271731] parport_pc 00:09: reported by Plug and Play ACPI [ 9.271841] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 9.605049] [drm] Initialized drm 1.1.0 20060810 [ 9.607202] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input3 [ 9.616048] usb 2-1: new low-speed USB device number 2 using ohci-pci [ 9.623043] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 9.623222] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 9.623370] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 9.623521] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 9.623672] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 9.623821] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 9.623968] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 9.624151] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 9.624663] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 9.624712] hda-intel 0000:01:00.1: Force to non-snoop mode [ 9.624814] snd_hda_intel 0000:01:00.1: irq 41 for MSI/MSI-X [ 9.629149] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.629208] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.629611] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 9.640654] scsi4 : pata_atiixp [ 9.641153] scsi5 : pata_atiixp [ 9.641599] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 9.641647] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 9.669019] kvm: Nested Virtualization enabled [ 9.680672] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 9.680788] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10 [ 9.732635] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 9.733023] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.733501] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9.733608] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 9.734951] powernow-k8: fid 0xd (2100 MHz), vid 0xc [ 9.735003] powernow-k8: fid 0xc (2000 MHz), vid 0xd [ 9.735053] powernow-k8: fid 0xa (1800 MHz), vid 0xf [ 9.735100] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 9.735209] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 (2 cpu cores) (version 2.20.00) [ 9.737638] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 9.738132] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 9.739078] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 9.739455] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 9.739697] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17 [ 9.783039] [drm] radeon kernel modesetting enabled. [ 9.816070] usb 2-1: New USB device found, idVendor=09da, idProduct=0260 [ 9.816124] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.816173] usb 2-1: Product: USB Keyboard [ 9.816220] usb 2-1: Manufacturer: [ 9.952120] usb 2-2: new low-speed USB device number 3 using ohci-pci [ 9.961232] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x174B:0xE213). [ 9.961362] [drm] register mmio base: 0xFDF80000 [ 9.961416] [drm] register mmio size: 262144 [ 9.965714] ATOM BIOS: C44501 [ 9.965991] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 9.966055] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 9.966115] [drm] Detected VRAM RAM=1024M, BAR=256M [ 9.966169] [drm] RAM width 128bits DDR [ 9.966367] [TTM] Zone kernel: Available graphics memory: 2547144 kiB [ 9.966422] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 9.966477] [TTM] Initializing pool allocator [ 9.966539] [TTM] Initializing DMA pool allocator [ 9.966648] [drm] radeon: 1024M of VRAM memory ready [ 9.966703] [drm] radeon: 512M of GTT memory ready. [ 9.994231] radeon 0000:01:00.0: firmware: agent loaded radeon/TAHITI_uvd.bin into memory [ 9.997383] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 10.001285] [drm] probing gen 2 caps for device 1002:7913 = 100d01/0 [ 10.001397] [drm] Loading VERDE Microcode [ 10.119091] usb 2-2: New USB device found, idVendor=05e3, idProduct=1205 [ 10.119161] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.119218] usb 2-2: Product: USB Mouse [ 10.254625] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 10.254839] sp5100_tco: PCI Revision ID: 0x14 [ 10.254914] sp5100_tco: failed to find MMIO address, giving up. [ 10.346727] radeon 0000:01:00.0: firmware: agent loaded radeon/VERDE_pfp.bin into memory [ 10.428713] radeon 0000:01:00.0: firmware: agent loaded radeon/VERDE_me.bin into memory [ 10.831060] radeon 0000:01:00.0: firmware: agent loaded radeon/VERDE_ce.bin into memory [ 10.987440] radeon 0000:01:00.0: firmware: agent loaded radeon/VERDE_rlc.bin into memory [ 11.052805] radeon 0000:01:00.0: firmware: agent loaded radeon/VERDE_mc.bin into memory [ 11.058134] radeon 0000:01:00.0: firmware: agent loaded radeon/VERDE_smc.bin into memory [ 11.499926] [drm] PCIE GART of 512M enabled (table at 0x0000000000276000). [ 11.500235] radeon 0000:01:00.0: WB enabled [ 11.500296] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880165884c00 [ 11.500362] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880165884c04 [ 11.500427] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880165884c08 [ 11.500492] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880165884c0c [ 11.500556] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880165884c10 [ 11.500623] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900112b5a18 [ 11.500689] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 11.500743] [drm] Driver supports precise vblank timestamp query. [ 11.500842] radeon 0000:01:00.0: irq 42 for MSI/MSI-X [ 11.500876] radeon 0000:01:00.0: radeon: using MSI. [ 11.500993] [drm] radeon: irq initialized. [ 11.520537] [drm] ring test on 0 succeeded in 0 usecs [ 11.520598] [drm] ring test on 1 succeeded in 1 usecs [ 11.520656] [drm] ring test on 2 succeeded in 1 usecs [ 11.520773] [drm] ring test on 3 succeeded in 2 usecs [ 11.520835] [drm] ring test on 4 succeeded in 1 usecs [ 11.705923] [drm] ring test on 5 succeeded in 1 usecs [ 11.705980] [drm] UVD initialized successfully. [ 11.708335] [drm] ib test on ring 0 succeeded in 0 usecs [ 11.708419] [drm] ib test on ring 1 succeeded in 0 usecs [ 11.708501] [drm] ib test on ring 2 succeeded in 0 usecs [ 11.708585] [drm] ib test on ring 3 succeeded in 0 usecs [ 11.708670] [drm] ib test on ring 4 succeeded in 1 usecs [ 11.807471] hidraw: raw HID events driver (C) Jiri Kosina [ 11.859168] usbcore: registered new interface driver usbhid [ 11.860045] usbhid: USB HID core driver [ 11.860958] [drm] ib test on ring 5 succeeded [ 11.861784] [drm] Radeon Display Connectors [ 11.861834] [drm] Connector 0: [ 11.861882] [drm] DP-1 [ 11.861930] [drm] HPD4 [ 11.861977] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 11.862027] [drm] Encoders: [ 11.862073] [drm] DFP1: INTERNAL_UNIPHY2 [ 11.862120] [drm] Connector 1: [ 11.862165] [drm] HDMI-A-1 [ 11.862211] [drm] HPD1 [ 11.862257] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c [ 11.862308] [drm] Encoders: [ 11.862354] [drm] DFP2: INTERNAL_UNIPHY2 [ 11.862400] [drm] Connector 2: [ 11.862446] [drm] DVI-I-1 [ 11.862492] [drm] HPD2 [ 11.862538] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 11.862589] [drm] Encoders: [ 11.862634] [drm] DFP3: INTERNAL_UNIPHY [ 11.866862] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 11.866968] [drm] Internal thermal controller with fan control [ 11.867112] [drm] probing gen 2 caps for device 1002:7913 = 100d01/0 [ 11.867198] == power state 0 == [ 11.867245] ui class: none [ 11.867331] internal class: boot [ 11.867457] caps: [ 11.867543] uvd vclk: 0 dclk: 0 [ 11.867590] power level 0 sclk: 30000 mclk: 14900 vddc: 950 vddci: 900 pcie gen: 1 [ 11.867641] status: c r b [ 11.867848] == power state 1 == [ 11.867894] ui class: performance [ 11.867979] internal class: none [ 11.868120] caps: [ 11.868206] uvd vclk: 0 dclk: 0 [ 11.868253] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 900 pcie gen: 1 [ 11.868305] power level 1 sclk: 40000 mclk: 112500 vddc: 950 vddci: 950 pcie gen: 1 [ 11.868357] power level 2 sclk: 80000 mclk: 112500 vddc: 1125 vddci: 950 pcie gen: 1 [ 11.868407] status: [ 11.868492] == power state 2 == [ 11.868538] ui class: none [ 11.868623] internal class: uvd [ 11.868749] caps: video [ 11.868875] uvd vclk: 72000 dclk: 56000 [ 11.868922] power level 0 sclk: 40000 mclk: 112500 vddc: 950 vddci: 950 pcie gen: 1 [ 11.868974] power level 1 sclk: 40000 mclk: 112500 vddc: 950 vddci: 950 pcie gen: 1 [ 11.869026] power level 2 sclk: 80000 mclk: 112500 vddc: 1125 vddci: 950 pcie gen: 1 [ 11.869077] status: [ 11.869162] == power state 3 == [ 11.869208] ui class: none [ 11.869293] internal class: ulv [ 11.869419] caps: [ 11.869504] uvd vclk: 0 dclk: 0 [ 11.869551] power level 0 sclk: 30000 mclk: 15000 vddc: 800 vddci: 900 pcie gen: 1 [ 11.869603] power level 1 sclk: 30000 mclk: 15000 vddc: 800 vddci: 900 pcie gen: 1 [ 11.869655] power level 2 sclk: 30000 mclk: 15000 vddc: 800 vddci: 900 pcie gen: 1 [ 11.869706] status: [ 11.881641] switching from power state: [ 11.881689] ui class: none [ 11.881774] internal class: boot [ 11.881900] caps: [ 11.881985] uvd vclk: 0 dclk: 0 [ 11.882032] power level 0 sclk: 30000 mclk: 14900 vddc: 950 vddci: 900 pcie gen: 1 [ 11.882083] status: c b [ 11.882249] switching to power state: [ 11.882295] ui class: performance [ 11.882380] internal class: none [ 11.882506] caps: [ 11.882591] uvd vclk: 0 dclk: 0 [ 11.882638] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 900 pcie gen: 1 [ 11.882690] power level 1 sclk: 40000 mclk: 112500 vddc: 950 vddci: 950 pcie gen: 1 [ 11.882742] power level 2 sclk: 80000 mclk: 112500 vddc: 1125 vddci: 950 pcie gen: 1 [ 11.882793] status: r [ 11.884069] [drm] radeon: dpm initialized [ 11.927941] [drm] fb mappable at 0xD1388000 [ 11.927992] [drm] vram apper at 0xD0000000 [ 11.928063] [drm] size 5242880 [ 11.928115] [drm] fb depth is 24 [ 11.928161] [drm] pitch is 5120 [ 11.928311] fbcon: radeondrmfb (fb0) is primary device [ 11.932323] switching from power state: [ 11.932325] ui class: performance [ 11.932326] internal class: none [ 11.932327] caps: [ 11.932327] uvd vclk: 0 dclk: 0 [ 11.932329] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 900 pcie gen: 1 [ 11.932331] power level 1 sclk: 40000 mclk: 112500 vddc: 950 vddci: 950 pcie gen: 1 [ 11.932332] power level 2 sclk: 80000 mclk: 112500 vddc: 1125 vddci: 950 pcie gen: 1 [ 11.932334] status: c r [ 11.932334] switching to power state: [ 11.932335] ui class: performance [ 11.932336] internal class: none [ 11.932336] caps: [ 11.932337] uvd vclk: 0 dclk: 0 [ 11.932338] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 900 pcie gen: 1 [ 11.932340] power level 1 sclk: 40000 mclk: 112500 vddc: 950 vddci: 950 pcie gen: 1 [ 11.932342] power level 2 sclk: 80000 mclk: 112500 vddc: 1125 vddci: 950 pcie gen: 1 [ 11.932343] status: c r [ 11.964593] Console: switching to colour frame buffer device 160x64 [ 11.971985] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input18 [ 11.972210] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 11.972264] radeon 0000:01:00.0: registered panic notifier [ 11.972653] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0 [ 11.977673] hid-generic 0003:09DA:0260.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:13.0-1/input0 [ 11.982196] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input19 [ 11.982491] hid-generic 0003:09DA:0260.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:13.0-1/input1 [ 11.982902] input: USB Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input20 [ 11.983125] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:13.0-2/input0 [ 13.414601] reiserfs: enabling write barrier flush mode [ 14.864156] loop: module loaded [ 15.153352] fuse init (API version 7.22) [ 15.300739] cfg80211: Calling CRDA to update world regulatory domain [ 15.828379] it87: Found IT8716F chip at 0x228, revision 0 [ 15.833352] it87: Beeping is supported [ 16.143123] Adding 1048572k swap on /dev/mapper/globus-swap. Priority:-1 extents:1 across:1048572k [ 16.790721] REISERFS (device dm-3): found reiserfs format "3.6" with standard journal [ 16.796280] REISERFS (device dm-3): using ordered data mode [ 16.801768] reiserfs: using flush barriers [ 16.807750] REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 16.821733] REISERFS (device dm-3): checking transaction log (dm-3) [ 16.887628] REISERFS (device dm-3): Using r5 hash to sort names [ 16.915489] REISERFS (device dm-4): found reiserfs format "3.6" with standard journal [ 16.921473] REISERFS (device dm-4): using ordered data mode [ 16.927359] reiserfs: using flush barriers [ 16.933725] REISERFS (device dm-4): journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 16.948448] REISERFS (device dm-4): checking transaction log (dm-4) [ 17.008634] REISERFS (device dm-4): Using r5 hash to sort names [ 17.067799] REISERFS (device dm-5): found reiserfs format "3.6" with standard journal [ 17.074135] REISERFS (device dm-5): using ordered data mode [ 17.080249] reiserfs: using flush barriers [ 17.091764] REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 17.106752] REISERFS (device dm-5): checking transaction log (dm-5) [ 17.162916] REISERFS (device dm-5): Using r5 hash to sort names [ 17.189804] REISERFS (device dm-2): found reiserfs format "3.6" with standard journal [ 17.189854] REISERFS (device dm-2): using ordered data mode [ 17.189856] reiserfs: using flush barriers [ 17.190462] REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 17.192980] REISERFS (device dm-2): checking transaction log (dm-2) [ 17.274141] REISERFS (device dm-2): Using r5 hash to sort names [ 18.789896] Bridge firewalling registered [ 18.808297] device eth0 entered promiscuous mode [ 18.892861] r8169 0000:02:0f.0 eth0: link down [ 18.892894] r8169 0000:02:0f.0 eth0: link down [ 18.905072] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.916698] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 20.447196] r8169 0000:02:0f.0 eth0: link up [ 20.453338] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.460227] br0: port 1(eth0) entered forwarding state [ 20.466493] br0: port 1(eth0) entered forwarding state [ 20.472808] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 20.813633] PPP generic driver version 2.4.2 [ 21.347040] NET: Registered protocol family 24 [ 22.301954] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.284770] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)