[    0.616329] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    0.616388] hidraw: raw HID events driver (C) Jiri Kosina
[    0.617352] usbcore: registered new interface driver usbhid
[    0.617354] usbhid: USB HID core driver
[    0.617566] ashmem: initialized
[    0.617766] TCP: bic registered
[    0.617768] NET: Registered protocol family 17
[    0.617814] Key type dns_resolver registered
[    0.618726] registered taskstats version 1
[    0.626077] fbcondecor: console 0 using theme 'sabayon'
[    0.646978] fbcondecor: switched decor state to 'on' on console 0
[    0.914439] ata7: SATA link down (SStatus 0 SControl 300)
[    0.914499] ata8: SATA link down (SStatus 0 SControl 300)
[    1.059328] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.069752] ata1.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
[    1.069757] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.070764] ata1.00: configured for UDMA/133
[    1.071083] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[    1.072027] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.072082] sd 0:0:0:0: [sda] Write Protect is off
[    1.072088] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.072123] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.072440] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.078732]  sda: sda1 sda2 sda3
[    1.079980] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.531988] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.537675] ata2.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133
[    1.537680] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.538703] ata2.00: configured for UDMA/133
[    1.538919] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
[    1.539636] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.539691] sd 1:0:0:0: [sdb] Write Protect is off
[    1.539697] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.539711] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.539959] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.548943]  sdb: sdb1
[    1.549583] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.554971] tsc: Refined TSC clocksource calibration: 2664.772 MHz
[    1.554977] Switching to clocksource tsc
[    1.999653] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.008600] ata3.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[    2.008606] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.009643] ata3.00: configured for UDMA/133
[    2.009940] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
[    2.010497] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.010629] sd 2:0:0:0: [sdc] Write Protect is off
[    2.010635] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.010658] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.011030] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.019199]  sdc: sdc1
[    2.020238] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.470320] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.470999] ata4.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133
[    2.471004] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.471770] ata4.00: configured for UDMA/133
[    2.472026] scsi 3:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00D 80.0 PQ: 0 ANSI: 5
[    2.472981] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[    2.472986] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[    2.473057] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    2.473211] sd 3:0:0:0: [sdd] Write Protect is off
[    2.473214] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.473333] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.544684]  sdd: sdd1
[    2.545875] sd 3:0:0:0: [sdd] Attached SCSI disk
[    2.933041] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.937737] ata5.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133
[    2.937742] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.938804] ata5.00: configured for UDMA/133
[    2.938972] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
[    2.939850] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.940104] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    2.940129] sd 4:0:0:0: [sde] Write Protect is off
[    2.940135] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    2.940163] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.943307]  sde: sde1
[    2.943990] sd 4:0:0:0: [sde] Attached SCSI disk
[    3.399658] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.402214] ata6.00: ATAPI: ASUS    DRW-24B3LT, 1.00, max UDMA/100
[    3.403356] ata6.00: configured for UDMA/100
[    3.405598] scsi 5:0:0:0: CD-ROM            ASUS     DRW-24B3LT       1.00 PQ: 0 ANSI: 5
[    3.409600] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.409604] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.410316] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    3.411061] sr 5:0:0:0: Attached scsi generic sg5 type 5
[    3.574980] Freeing unused kernel memory: 1036k freed
[    3.575107] Write protecting the kernel read-only data: 16384k
[    3.578982] Freeing unused kernel memory: 1524k freed
[    3.582655] Freeing unused kernel memory: 1956k freed
[    3.856820] systemd-udevd[3105]: starting version 202
[    3.870240] uhci_hcd: USB Universal Host Controller Interface driver
[    3.870327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.870329] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    3.870381] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.870385] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.870445] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.870448] ehci-pci: EHCI PCI platform driver
[    3.870482] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[    3.870522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.870526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.870529] usb usb1: Product: UHCI Host Controller
[    3.870532] usb usb1: Manufacturer: Linux 3.9.0-sabayon uhci_hcd
[    3.870534] usb usb1: SerialNumber: 0000:00:1a.0
[    3.870668] hub 1-0:1.0: USB hub found
[    3.870674] hub 1-0:1.0: 2 ports detected
[    3.870835] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.870839] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.870930] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    3.870968] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[    3.871003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.871006] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.871008] usb usb2: Product: UHCI Host Controller
[    3.871010] usb usb2: Manufacturer: Linux 3.9.0-sabayon uhci_hcd
[    3.871012] usb usb2: SerialNumber: 0000:00:1a.1
[    3.871098] hub 2-0:1.0: USB hub found
[    3.871102] hub 2-0:1.0: 2 ports detected
[    3.871227] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    3.871231] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    3.871277] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    3.871303] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[    3.871335] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.871339] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.871342] usb usb3: Product: UHCI Host Controller
[    3.871344] usb usb3: Manufacturer: Linux 3.9.0-sabayon uhci_hcd
[    3.871347] usb usb3: SerialNumber: 0000:00:1a.2
[    3.871434] hub 3-0:1.0: USB hub found
[    3.871438] hub 3-0:1.0: 2 ports detected
[    3.871565] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.871569] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.871625] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    3.871660] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[    3.871692] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.871695] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.871698] usb usb4: Product: UHCI Host Controller
[    3.871701] usb usb4: Manufacturer: Linux 3.9.0-sabayon uhci_hcd
[    3.871704] usb usb4: SerialNumber: 0000:00:1d.0
[    3.871811] hub 4-0:1.0: USB hub found
[    3.871816] hub 4-0:1.0: 2 ports detected
[    3.871984] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.871988] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.872035] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    3.872069] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[    3.872103] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.872107] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.872109] usb usb5: Product: UHCI Host Controller
[    3.872112] usb usb5: Manufacturer: Linux 3.9.0-sabayon uhci_hcd
[    3.872115] usb usb5: SerialNumber: 0000:00:1d.1
[    3.872219] hub 5-0:1.0: USB hub found
[    3.872223] hub 5-0:1.0: 2 ports detected
[    3.872419] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.872424] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.872470] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    3.872496] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[    3.872529] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.872533] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.872536] usb usb6: Product: UHCI Host Controller
[    3.872539] usb usb6: Manufacturer: Linux 3.9.0-sabayon uhci_hcd
[    3.872542] usb usb6: SerialNumber: 0000:00:1d.2
[    3.872661] hub 6-0:1.0: USB hub found
[    3.872666] hub 6-0:1.0: 2 ports detected
[    3.872856] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    3.872861] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    3.872993] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[    3.873008] ehci-pci 0000:00:1a.7: debug port 1
[    3.876911] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    3.876921] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
[    3.882193] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.882213] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    3.882215] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.882218] usb usb7: Product: EHCI Host Controller
[    3.882220] usb usb7: Manufacturer: Linux 3.9.0-sabayon ehci_hcd
[    3.882222] usb usb7: SerialNumber: 0000:00:1a.7
[    3.882343] hub 7-0:1.0: USB hub found
[    3.882349] hub 7-0:1.0: 6 ports detected
[    3.882576] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    3.882581] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    3.882632] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    3.882647] ehci-pci 0000:00:1d.7: debug port 1
[    3.886549] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    3.886558] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
[    3.892310] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.892334] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    3.892338] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.892342] usb usb8: Product: EHCI Host Controller
[    3.892346] usb usb8: Manufacturer: Linux 3.9.0-sabayon ehci_hcd
[    3.892349] usb usb8: SerialNumber: 0000:00:1d.7
[    3.892518] hub 8-0:1.0: USB hub found
[    3.892524] hub 8-0:1.0: 6 ports detected
[    4.184088] usb 7-3: new high-speed USB device number 2 using ehci-pci
[    4.299543] usb 7-3: New USB device found, idVendor=2040, idProduct=1605
[    4.299547] usb 7-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[    4.299551] usb 7-3: Product: WinTV HVR-930C
[    4.299553] usb 7-3: SerialNumber: 4034564214
[    4.400837] usb 7-4: new high-speed USB device number 3 using ehci-pci
[    4.488857] scsi10 : pata_legacy
[    4.488911] ata11: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    4.516318] usb 7-4: New USB device found, idVendor=14cd, idProduct=6116
[    4.516324] usb 7-4: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[    4.516328] usb 7-4: Product: USB 2.0  SATA BRIDGE   
[    4.516331] usb 7-4: Manufacturer: Super Top   
[    4.516335] usb 7-4: SerialNumber: M6116018VF16
[    4.516960] scsi11 : usb-storage 7-4:1.0
[    4.640403] scsi12 : pata_legacy
[    4.640453] ata12: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    4.801761] pcmcia: Unknown parameter `pcmcia'
[    4.808704] pata_pcmcia: Unknown symbol pcmcia_disable_device (err 0)
[    4.808710] pata_pcmcia: Unknown symbol pcmcia_unregister_driver (err 0)
[    4.808721] pata_pcmcia: Unknown symbol pcmcia_loop_config (err 0)
[    4.808730] pata_pcmcia: Unknown symbol pcmcia_request_io (err 0)
[    4.808741] pata_pcmcia: Unknown symbol pcmcia_register_driver (err 0)
[    4.808745] pata_pcmcia: Unknown symbol pcmcia_enable_device (err 0)
[    4.922869] scsi: <fdomain> Detection failed (no card)
[    4.964081] imm: Version 2.05 (for Linux 2.4.0)
[    5.034631] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.129427] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    5.130224] JFS: nTxBlock = 8192, nTxLock = 65536
[    5.134659] RPC: Registered named UNIX socket transport module.
[    5.134662] RPC: Registered udp transport module.
[    5.134663] RPC: Registered tcp transport module.
[    5.134664] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.139395] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    5.155553] SPL: Loaded module v0.6.1-11_g8bbda8d
[    5.155747] znvpair: module license 'CDDL' taints kernel.
[    5.155749] Disabling lock debugging due to kernel taint
[    5.159084] fuse init (API version 7.21)
[    5.161465] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    5.161468] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    5.163564] pps_core: LinuxPPS API ver. 1 registered
[    5.163566] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    5.163727] PTP clock support registered
[    5.170811] iscsi: registered transport (tcp)
[    5.189462] virtio: Unknown parameter `virtio'
[    5.201515] virtio: Unknown parameter `virtio'
[    5.207806] virtio_balloon: Unknown symbol register_virtio_driver (err 0)
[    5.207827] virtio_balloon: Unknown symbol unregister_virtio_driver (err 0)
[    5.207854] virtio_balloon: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    5.210011] virtio: Unknown parameter `virtio'
[    5.218543] virtio_console: Unknown symbol register_virtio_driver (err 0)
[    5.218579] virtio_console: Unknown symbol unregister_virtio_driver (err 0)
[    5.218626] virtio_console: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    5.220780] virtio: Unknown parameter `virtio'
[    5.226514] virtio_net: Unknown symbol register_virtio_driver (err 0)
[    5.226549] virtio_net: Unknown symbol unregister_virtio_driver (err 0)
[    5.226599] virtio_net: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    5.228742] virtio: Unknown parameter `virtio'
[    5.234606] virtio_blk: Unknown symbol register_virtio_driver (err 0)
[    5.234640] virtio_blk: Unknown symbol unregister_virtio_driver (err 0)
[    5.234689] virtio_blk: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    5.236766] virtio: Unknown parameter `virtio'
[    5.244501] virtio_pci: Unknown symbol unregister_virtio_device (err 0)
[    5.244516] virtio_pci: Unknown symbol register_virtio_device (err 0)
[    5.276318] usb 3-1: New USB device found, idVendor=056a, idProduct=00ba
[    5.276323] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.276328] usb 3-1: Product: PTK-840
[    5.276331] usb 3-1: Manufacturer: Tablet
[    5.419041] VFS: could not find a valid V7 on sda3.
[    5.465933] UDF-fs: warning (device sda3): udf_fill_super: No partition found (1)
[    5.466386] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[    5.466618] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[    5.485175] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[    5.501483] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    5.518911] scsi 11:0:0:0: Direct-Access     ST950032 5AS                   PQ: 0 ANSI: 0
[    5.524258] sd 11:0:0:0: Attached scsi generic sg6 type 0
[    5.524935] sd 11:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    5.525603] sd 11:0:0:0: [sdf] Write Protect is off
[    5.525607] sd 11:0:0:0: [sdf] Mode Sense: 03 00 00 00
[    5.526233] sd 11:0:0:0: [sdf] No Caching mode page present
[    5.526238] sd 11:0:0:0: [sdf] Assuming drive cache: write through
[    5.528328] sd 11:0:0:0: [sdf] No Caching mode page present
[    5.528333] sd 11:0:0:0: [sdf] Assuming drive cache: write through
[    5.528863]  sdf: sdf1
[    5.533984] sd 11:0:0:0: [sdf] No Caching mode page present
[    5.533990] sd 11:0:0:0: [sdf] Assuming drive cache: write through
[    5.533994] sd 11:0:0:0: [sdf] Attached SCSI disk
[    5.852937] usb 3-2: New USB device found, idVendor=046d, idProduct=c517
[    5.852943] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.852947] usb 3-2: Product: USB Receiver
[    5.852951] usb 3-2: Manufacturer: Logitech
[    5.870107] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/input/input2
[    5.870499] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.2-2/input0
[    5.901956] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    5.902311] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.1/input/input3
[    5.902880] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-2/input1
[    8.903570] systemd-udevd[4266]: starting version 202
[   10.967171] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.968802] udevd[4444]: failed to execute '/lib/udev/usb-db' 'usb-db /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.1': No such file or directory
[   11.027241] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20130117/utaddress-251)
[   11.027248] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.027273] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.039722] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[   11.041649] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.041847] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[   11.041948] r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffc90000c7e000, 00:1f:d0:ad:97:b9, XID 081000c0 IRQ 45
[   11.041951] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   11.041964] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.042152] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[   11.042236] r8169 0000:05:00.0 eth1: RTL8168d/8111d at 0xffffc900069f6000, 00:1f:d0:ad:97:bb, XID 081000c0 IRQ 46
[   11.042239] r8169 0000:05:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   11.049810] gameport gameport0: EMU10K1 is pci0000:06:01.1/gameport0, io 0xbe00, speed 896kHz
[   11.104189] media: Linux media interface: v0.10
[   11.110865] Linux video capture interface: v2.00
[   11.137348] em28xx: New device  WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0)
[   11.137350] em28xx: Audio interface 0 found (Vendor Class)
[   11.137351] em28xx: Video interface 0 found: isoc
[   11.137353] em28xx: DVB interface 0 found: isoc
[   11.137428] em28xx: chip ID is em2884
[   11.187609] microcode: CPU0 sig=0x106a4, pf=0x2, revision=0xa
[   11.188224] em2884 #0: Identified as Hauppauge WinTV HVR 930C (card=81)
[   11.188270] em2884 #0: Config register raw data: 0x82
[   11.188273] em2884 #0: v4l2 driver version 0.1.3
[   11.192971] em2884 #0: V4L2 video device registered as video0
[   11.192973] em2884 #0: analog set to isoc mode.
[   11.192974] em2884 #0: dvb set to isoc mode.
[   11.193213] usbcore: registered new interface driver em28xx
[   11.328062] input: Wacom Intuos4 8x13 as /devices/pci0000:00/0000:00:1a.2/usb3/3-1/3-1:1.0/input/input5
[   11.349267] EDAC MC: Ver: 3.0.0
[   11.385643] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   11.392923] firewire_ohci 0000:06:01.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[   11.428677] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   11.428740] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.428795] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.428855] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.428912] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.428965] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.429018] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.429075] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.429354] hda_intel: Disabling MSI
[   11.429361] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   11.429433] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[   11.429462] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[   11.429466] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   11.443900] firewire_ohci 0000:06:06.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x2
[   11.647798] microcode: CPU1 sig=0x106a4, pf=0x2, revision=0xa
[   11.726446] microcode: CPU2 sig=0x106a4, pf=0x2, revision=0xa
[   11.726719] microcode: CPU3 sig=0x106a4, pf=0x2, revision=0xa
[   11.727085] microcode: CPU4 sig=0x106a4, pf=0x2, revision=0xa
[   11.727366] microcode: CPU5 sig=0x106a4, pf=0x2, revision=0xa
[   11.727742] microcode: CPU6 sig=0x106a4, pf=0x2, revision=0xa
[   11.728042] microcode: CPU7 sig=0x106a4, pf=0x2, revision=0xa
[   11.728383] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   11.893711] firewire_core 0000:06:01.2: created device fw0: GUID 00023c002102d5e4, S400
[   11.937589] usbcore: registered new interface driver wacom
[   11.945589] firewire_core 0000:06:06.0: created device fw1: GUID 00aba21c00001fd0, S400
[   11.964094] iTCO_vendor_support: vendor-support=0
[   11.971588] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   11.971617] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   12.102489] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
[   12.102645] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
[   12.102808] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
[   12.102968] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input17
[   12.399489] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   12.479012] drxk: Could not load firmware file dvb-usb-hauppauge-hvr930c-drxk.fw.
[   12.479015] drxk: Copy dvb-usb-hauppauge-hvr930c-drxk.fw to your hotplug directory!
[   12.488591] drxk: status = 0x439130d9
[   12.488594] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
[   12.544302] DRXK driver version 0.9.4300
[   12.559041] drxk: frontend initialized.
[   12.621362] xc5000 1-0061: creating new instance
[   12.621871] xc5000: Successfully identified at address 0x61
[   12.621873] xc5000: Firmware has not been loaded previously
[   12.621875] DVB: registering new adapter (em2884 #0)
[   12.621879] usb 7-3: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
[   12.622413] em2884 #0: Successfully loaded em28xx-dvb
[   12.622418] Em28xx: Initialized (Em28xx dvb Extension) extension
[   12.697926] Registered IR keymap rc-hauppauge
[   12.698024] input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/rc/rc0/input18
[   12.698114] rc0: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/rc/rc0
[   12.698448] Em28xx: Initialized (Em28xx Input Extension) extension
[   12.838305] gpio_ich: GPIO from 195 to 255 on gpio_ich
[   12.943551] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   12.943632] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  313.30  Wed Mar 27 16:56:45 PDT 2013
[   13.700581] NVRM: Your system is not currently configured to drive a VGA console
[   13.700584] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   13.700586] NVRM: requires the use of a text-mode VGA console. Use of other console
[   13.700587] NVRM: drivers including, but not limited to, vesafb, may result in
[   13.700589] NVRM: corruption and stability problems, and is not supported.
[   15.731734] EXT4-fs (sda3): re-mounted. Opts: (null)